课题_智能窗帘的外文文献

智能车中英文外文翻译

中英文对照资料外文翻译文献 自治智能车在模拟车辆列队中的设计 摘要 自治智能车是基于考虑车辆和道路在内的车辆编队的物理仿真的基础。本文在车辆道路综合的情况下，分析了车辆编队系统的架构，并提出了自制智能车控制系统的构造和结构。在分析了自治智能车的功能要求之后，本文设计了自治智能车关键的硬件和软件。它把芯片作为控制器，以及用摄像头和超声波传感器作为行车导航。同时，它应用直流电机实现智能车的驱动和转向，以及采用Zigbee技术来设计无线通信模块。我们提出的关于识别导航线和运动控制的关键算法，这其中包括路径提取和控制算法。试验表明自治智能车有一个良好的稳定性能，满足了车辆编队系统的功能要求，这款车将提供测试平台和车辆编队系统的进一步研究的技术基础。 1.简介 近年来，随着横向和纵向的智能车辆控制技术等智能交通技术的发展，车辆列队研究已成为在智能交通领域的热点，它融合了一些技术，这其中包括车辆间相互通信，公路通信技术，智能控制技术等。在车辆道路综合的基础上的车辆队列控制系统可以通过提高单个车辆的智能化水平，提高与交通环境交互信息的能力，以及增加车辆密度来提高道路通行能力。与此同时，它减少了控制对象，简化了交通控制复杂性，增加了运输可控性，有效地缓解了交通堵塞，并最终提高了行车安全性。此外，它可以在一定程度上减少车辆阻力和车辆油耗。 图1显示了基于车辆道路行驶的车辆队列架构系统，这表明智能车辆控制，车路信息交互技术，车辆队列和控制方式和其他关键技术是系统的重要组成部分。然而，目前汽车队列的结构，行为特征和智能化行程控制算法尚未完善。因此，有必要研究一些基础东西，这包括车辆队列，车辆队列模型，及车辆小队控制方法的行为特征，这些研究需要在建设有硬件循环仿真的车辆队列系统中进行。

机器人外文翻译

英文原文出自《Advanced Technology Libraries》2008年第5期 Robot Robot is a type of mechantronics equipment which synthesizes the last research achievement of engine and precision engine, micro-electronics and computer, automation control and drive, sensor and message dispose and artificial intelligence and so on. With the development of economic and the demand for automation control, robot technology is developed quickly and all types of the robots products are come into being. The practicality use of robot products not only solves the problems which are difficult to operate for human being, but also advances the industrial automation program. At present, the research and development of robot involves several kinds of technology and the robot system configuration is so complex that the cost at large is high which to a certain extent limit the robot abroad use. To development economic practicality and high reliability robot system will be value to robot social application and economy development. With the rapid progress with the control economy and expanding of the modern cities, the let of sewage is increasing quickly: With the development of modern technology and the enhancement of consciousness about environment reserve, more and more people realized the importance and urgent of sewage disposal. Active bacteria method is an effective technique for sewage disposal，The lacunaris plastic is an effective basement for active bacteria adhesion for sewage disposal. The abundance requirement for lacunaris plastic makes it is a consequent for the plastic producing with automation and high productivity. Therefore, it is very necessary to design a manipulator that can automatically fulfill the plastic holding. With the analysis of the problems in the design of the plastic holding manipulator and synthesizing the robot research and development condition in recent years, a economic scheme is concluded on the basis of the analysis of mechanical configuration, transform system, drive device and control system and guided by the idea of the characteristic and complex of mechanical configuration,

人工智能专业外文翻译-机器人

译文资料： 机器人 首先我介绍一下机器人产生的背景，机器人技术的发展，它应该说是一个科学技术发展共同的一个综合性的结果，同时，为社会经济发展产生了一个重大影响的一门科学技术，它的发展归功于在第二次世界大战中各国加强了经济的投入，就加强了本国的经济的发展。另一方面它也是生产力发展的需求的必然结果，也是人类自身发展的必然结果，那么随着人类的发展，人们在不断探讨自然过程中，在认识和改造自然过程中，需要能够解放人的一种奴隶。那么这种奴隶就是代替人们去能够从事复杂和繁重的体力劳动，实现人们对不可达世界的认识和改造，这也是人们在科技发展过程中的一个客观需要。 机器人有三个发展阶段，那么也就是说，我们习惯于把机器人分成三类，一种是第一代机器人，那么也叫示教再现型机器人，它是通过一个计算机，来控制一个多自由度的一个机械，通过示教存储程序和信息，工作时把信息读取出来，然后发出指令，这样的话机器人可以重复的根据人当时示教的结果，再现出这种动作，比方说汽车的点焊机器人，它只要把这个点焊的过程示教完以后，它总是重复这样一种工作，它对于外界的环境没有感知，这个力操作力的大小，这个工件存在不存在，焊的好与坏，它并不知道，那么实际上这种从第一代机器人，也就存在它这种缺陷，因此，在20世纪70年代后期，人们开始研究第二代机器人，叫带感觉的机器人，这种带感觉的机器人是类似人在某种功能的感觉，比如说力觉、触觉、滑觉、视觉、听觉和人进行相类比，有了各种各样的感觉，比方说在机器人抓一个物体的时候，它实际上力的大小能感觉出来，它能够通过视觉，能够去感受和识别它的形状、大小、颜色。抓一个鸡蛋，它能通过一个触觉，知道它的力的大小和滑动的情况。第三代机器人，也是我们机器人学中一个理想的所追求的最高级的阶段，叫智能机器人，那么只要告诉它做什么，不用告诉它怎么去做，它就能完成运动，感知思维和人机通讯的这种功能和机能，那么这个目前的发展还是相对的只是在局部有这种智能的概念和含义，但真正完整意义的这种智能机器人实际上并没有存在，而只是随着我们不断的科学技术的发展，智能的概念越来越丰富，它内涵越来越宽。 下面我简单介绍一下我国机器人发展的基本概况。由于我们国家存在很多其

智能家居外文翻译外文文献英文文献

Increasing an individual’s quality of life via their intelligent home The hypothesis of this project is: can an individual?s quality of life be increased by integrating “intelligent technology” into their home environment. This hypothesis is very broad, and hence the researchers will investigate it with regard to various, potentially over-lapping, sub-sections of the population. In particular, the project will focus on sub-sections with health-care needs, because it is believed that these sub-sections will receive the greatest benefit from this enhanced approach to housing. Two research questions flow from this hypothesis: what are the health-care issues that could be improved via “intelligent housing”, and what are the technological issues needing to be so lved to allow “intelligent housing” to be constructed? While a small number of initiatives exist, outside Canada, which claim to investigate this area, none has the global vision of this area. Work tends to be in small areas with only a limited idea of how the individual pieces contribute towards a greater goal. This project has a very strong sense of what it is trying to attempt, and believes that without this global direction the other initiatives will fail to address the large important issues described within various parts of this proposal, and that with the correct global direction the sum of the parts will produce much greater rewards than the individual components. This new field has many parallels with the field of business process engineering, where many products fail due to only considering a sub-set of the issues, typically the technology subset. Successful projects and implementations only started flow when people started to realize that a holistic approach was essential. This holistic requirement also applies to the field of “smart housing”; if we genuinely want it to have benefit to the community rather than just technological interest. Having said this, much of the work outlined below is extremely important and contains a great deal of novelty within their individual topics. Health-Care and Supportive housing： To date, there has been little coordinated research on how “smart house” technologies can assist frail seniors in remaining at home, and/or reduce the costs experienced by their informal caregivers. Thus, the purpose of the proposed research is to determine the usefulness of a variety of residential technologies in helping

建筑类外文文献及中文翻译

forced concrete structure reinforced with an overviewRein Since the reform and opening up, with the national economy's rapid and sustained development of a reinforced concrete structure built, reinforced with the development of technology has been great. Therefore, to promote the use of advanced technology reinforced connecting to improve project quality and speed up the pace of construction, improve labor productivity, reduce costs, and is of great significance. Reinforced steel bars connecting technologies can be divided into two broad categories linking welding machinery and steel. There are six types of welding steel welding methods, and some apply to the prefabricated plant, and some apply to the construction site, some of both apply. There are three types of machinery commonly used reinforcement linking method primarily applicable to the construction site. Ways has its own characteristics and different application, and in the continuous development and improvement. In actual production, should be based on specific conditions of work, working environment and technical requirements, the choice of suitable methods to achieve the best overall efficiency. 1、steel mechanical link 1.1 radial squeeze link Will be a steel sleeve in two sets to the highly-reinforced Department with superhigh pressure hydraulic equipment (squeeze tongs) along steel sleeve radial squeeze steel casing, in squeezing out tongs squeeze pressure role of a steel sleeve plasticity deformation closely integrated with reinforced through reinforced steel sleeve and Wang Liang's Position will be two solid steel bars linked Characteristic: Connect intensity to be high, performance reliable, can bear high stress draw and pigeonhole the load and tired load repeatedly.

智能汽车中英文对照外文翻译文献

智能汽车中英文对照外文翻译文献 (文档含英文原文和中文翻译) 翻译： 基于智能汽车的智能控制研究 摘要：本文使用一个叫做“智能汽车”的平台进行智能控制研究，该小车采用飞思卡尔半导体公司制造的MC9S12DG128芯片作为主要的控制单元，同时介绍了最小的智能控制系统的设计和实现智能车的自我追踪驾驶使用路径识别算法。智能控制智能车的研究包括:提取路径信息,自我跟踪算法实现和方向和速度控制。下文介绍了系统中不同模块的各自实现功能，最重要部分是智能车的过程智能控制：开环控制和闭环控制的应用程序包括增量式PID控制算法和鲁棒控制算法。最后一步是

基于智能控制系统的智能测试。 关键词：MC9S12DG128；智能控制;开环控制；PID；鲁棒； 1.背景介绍 随着控制理论的提高以及信息技术的快速发展,智能控制在我们的社会中发挥着越来越重要的作用。由于嵌入式设备有小尺寸、低功耗、功能强大等优点，相信在这个领域将会有一个相对广泛的应用,如汽车电子、航空航天、智能家居。如果这些技术一起工作，它将会蔓延到其他领域。为了研究嵌入式智能控制技术，“智能汽车”被选为研究平台,并把MC9S12DG128芯片作为主控单元。通过智能控制,智能汽车可以自主移动,同时跟踪的路径。 首先,本文给读者一个总体介绍智能车辆系统的[2、3]。然后,根据智能车辆的智能控制:提取路径信息,自我跟踪算法实现中,舵机的方向和速度的控制。它提供包括了上述四个方面的细节的智能车系统信息。此外,本文强调了智能车的控制过程应用程序包括开环控制、闭环增量PID算法和鲁棒算法。 2.智能车系统的总体设计 该系统采用MC9S12DG128[4]作为主芯片，以及一个CCD传感器作为交通信息收集的传感器。速度传感器是基于无线电型光电管的原理开发。路径可以CCD传感器后绘制收集的数据，并且系统计算出相应的处理。在同时，用由电动马达速度测试模块测量的智能汽车的当前速度进行响应的系统。最后，路径识别系统利用所述路径信息和当前的速度，以使智能汽车在不同的道路条件的最高速度运行。图1示出了智能车辆系统的框图。

机器人结构论文中英文对照资料外文翻译文献

中英文对照资料外文翻译文献 FEM Optimization for Robot Structure Abstract In optimal design for robot structures, design models need to he modified and computed repeatedly. Because modifying usually can not automatically be run, it consumes a lot of time. This paper gives a method that uses APDL language of ANSYS 5.5 software to generate an optimal control program, which mike optimal procedure run automatically and optimal efficiency be improved. 1）Introduction Industrial robot is a kind of machine, which is controlled by computers. Because efficiency and maneuverability are higher than traditional machines, industrial robot is used extensively in industry. For the sake of efficiency and maneuverability, reducing mass and increasing stiffness is more important than traditional machines, in structure design of industrial robot. A lot of methods are used in optimization design of structure. Finite element method is a much effective method. In general, modeling and modifying are manual, which is feasible when model is simple. When model is complicated, optimization time is longer. In the longer optimization time, calculation time is usually very little, a majority of time is used for modeling and modifying. It is key of improving efficiency of structure optimization how to reduce modeling and modifying time. APDL language is an interactive development tool, which is based on ANSYS and is offered to program users. APDL language has typical function of some large computer languages. For example, parameter definition similar to constant and variable definition, branch and loop control, and macro call similar to function and subroutine call, etc. Besides these, it possesses powerful capability of mathematical calculation. The capability of mathematical calculation includes arithmetic calculation, comparison, rounding, and trigonometric function, exponential function and hyperbola function of standard FORTRAN language, etc. By means of APDL language, the data can be read and then calculated, which is in database of ANSYS program, and running process of ANSYS program can be controlled.

文献综述_人工智能

人工智能的形成及其发展现状分析 冯海东 （长江大学管理学院荆州434023） 摘要：人工智能的历史并不久远，故将从人工智能的出现、形成、发展现 状及前景几个方面对其进行分析，总结其发展过程中所出现的问题，以及发展现状中的不足之处，分析其今后的发展方向。 关键词：人工智能，发展过程，现状分析，前景。 一．引言 人工智能最早是在1936年被英国的科学家图灵提出，并不为多数人所认知。 当时，他编写了一个下象棋的程序，这就是最早期的人工智能的应用。也有著名的“图灵测试”，这也是最初判断是否是人工智能的方案,因此，图灵被尊称为“人工智能之父”。人工智能从产生到发展经历了一个起伏跌宕的过程，直到目前为止，人工智能的应用技术也不是很成熟，而且存在相当的缺陷。 通过搜集的资料，将详细的介绍人工智能这个领域的具体情况，剖析其面临的挑战和未来的前景。 二．人工智能的发展历程 1. 1956年前的孕育期 (1) 从公元前伟大的哲学家亚里斯多德(Aristotle)到16世纪英国哲学家培根(F. Bacon)，他们提出的形式逻辑的三段论、归纳法以及“知识就是力量”的警句，都对人类思维过程的研究产生了重要影响。 （2）17世纪德国数学家莱布尼兹(G..Leibniz)提出了万能符号和推理计算思想，为数理逻辑的产生和发展奠定了基础，播下了现代机器思维设计思想的种子。而19世纪的英国逻辑学家布尔（G. Boole）创立的布尔代数，实现了用符号语言描述人类思维活动的基本推理法则。 （3） 20世纪30年代迅速发展的数学逻辑和关于计算的新思想，使人们在计算机出现之前，就建立了计算与智能关系的概念。被誉为人工智能之父的英国天才的数学家图灵（A. Tur-ing）在1936年提出了一种理想计算机的数学模型，即图灵机之后,1946年就由美国数学家莫克利（J. Mauchly）和埃柯特（J. Echert）研制出了世界上第一台数字计算机，它为人工智能的研究奠定了不可缺少的物质基础。1950年图灵又发表了“计算机与智能”的论文，提出了著名的“图灵测试”，形象地指出什么是人工智能以及机器具有智能的标准，对人工智能的发展产生了极其深远的影响。 （4） 1934年美国神经生理学家麦克洛奇(W. McCulloch) 和匹兹(W. Pitts )建立了第一个神经网络模型，为以后的人工神经网络研究奠定了基础。 2. 1956年至1969年的诞生发育期 (1)1956年夏季，麻省理工学院（MIT)的麦卡锡（J．McCarthy）、明斯基（M. Minshy）、塞尔夫里奇（O. Selfridge)与索罗门夫(R. Solomonff)、 IBM的洛

外文翻译-基于Android智能家居系统

通信工程学院 毕业设计外文翻译 毕业设计题目基于ANDRIO的智能家居 系统的设计与实现 外文题目UBIQUITOUS SMART HOME SYSTEM USING ANDROID APPLICATION 专业：通信工程 学号： 学生姓名： 指导教师姓名： 指导教师职称：副教授 日期：2015 年 1 月10 日

International Journal of Computer Networks & Communications (IJCNC) V ol.6, No.1, January 2014 基于Android应用的无处不在的智能家居系统 Shiu Kumar Department of Information Electronics Engineering, Mokpo National University, 534-729, Mokpo, South Korea 摘要 本文提出了一种灵活独立的，低成本的智能家居系统，它是基于Android应用与微web服务器通信，不仅仅提供交换功能。Arduino以太网的使用是为了避免使用个人电脑从而保证整个系统成本最低，语音激活时用来实现切换功能的。光开关，电源插头，温度传感器，湿度传感器，电流传感器，入侵检测传感器，烟雾/气体传感器和警报器等这些设备集成在系统中，表明了所提出的智能家居系统的有效性和可行性。经过检测，智能家居应用程序可以成功地进行智能家居操作，例如开关功能，自动环境监测，和入侵监测，在监测到有不法入侵后，系统会自动发送一个邮件，并响警笛。 关键字： Android智能手机，智能家居，物联网（loTs），远程控制 1.引言 随着移动设备受欢迎程度的不断增长和人们日常生活中对无处不在的先进的移动应用的功能需求不断增加，利用Web服务是提供远程访问服务的最开放和可互操作的方式，并且使应用程序能够彼此通信。一个有吸引力的市场产品自动化和网络化是忙碌的家庭和有生理缺陷的个人的代表。 loTs可以被描述为连接智能手机，网络电视，传感器等到互联网，实现人们之间沟通的新形势。过去几年中loTs的发展，创造了一个新层面的世界。这使得人们可以在任何时间，任何地点，联通任何期望的东西。物联网技术可用于为智能家居创建新的概念和广阔的空间，以提供智能，舒适的发展空间和完善生活质量。 智能家居是一个非常有前途的领域，其中有各种好处，如增加提供舒适性，更高安全性，更合理地使用能源和其他资源。这项研究的应用领域非常重要，未来它为帮助和支持有特殊需求老的人和残疾人士提供了强有力的手段。设计一个智能家居系统时需要考虑许多因素，该系统应该是经济实惠的，是可伸缩的，使得新的设备可以容易地集成到系统中，此外，它应该是用户友好的。 随着智能手机用户的急剧增加，智能手机已经逐渐变成了具备所有功能的便携式设备，为人们提供了日常使用。本文介绍了一种低成本的控制和监视家居环境控制的无线智能家居系统。利用Android设备，可以通过一个嵌入式微Web服务器与实际的IP连接，访问和控制电器和远程的其它设备，这可以利用任何支持Android的设备。Arduino Ethernet 用于微Web服务器从

土木工程外文文献翻译

专业资料 学院： 专业：土木工程 姓名： 学号： 外文出处：Structural Systems to resist (用外文写) Lateral loads 附件：1.外文资料翻译译文；2.外文原文。

附件1：外文资料翻译译文 抗侧向荷载的结构体系 常用的结构体系 若已测出荷载量达数千万磅重，那么在高层建筑设计中就没有多少可以进行极其复杂的构思余地了。确实，较好的高层建筑普遍具有构思简单、表现明晰的特点。 这并不是说没有进行宏观构思的余地。实际上，正是因为有了这种宏观的构思，新奇的高层建筑体系才得以发展，可能更重要的是：几年以前才出现的一些新概念在今天的技术中已经变得平常了。 如果忽略一些与建筑材料密切相关的概念不谈，高层建筑里最为常用的结构体系便可分为如下几类： 1.抗弯矩框架。 2.支撑框架，包括偏心支撑框架。 3.剪力墙，包括钢板剪力墙。 4.筒中框架。 5.筒中筒结构。 6.核心交互结构。 7. 框格体系或束筒体系。 特别是由于最近趋向于更复杂的建筑形式，同时也需要增加刚度以抵抗几力和地震力，大多数高层建筑都具有由框架、支撑构架、剪力墙和相关体系相结合而构成的体系。而且，就较高的建筑物而言，大多数都是由交互式构件组成三维陈列。 将这些构件结合起来的方法正是高层建筑设计方法的本质。其结合方式需要在考虑环境、功能和费用后再发展，以便提供促使建筑发展达到新高度的有效结构。这并

不是说富于想象力的结构设计就能够创造出伟大建筑。正相反，有许多例优美的建筑仅得到结构工程师适当的支持就被创造出来了，然而，如果没有天赋甚厚的建筑师的创造力的指导，那么，得以发展的就只能是好的结构，并非是伟大的建筑。无论如何，要想创造出高层建筑真正非凡的设计，两者都需要最好的。 虽然在文献中通常可以见到有关这七种体系的全面性讨论，但是在这里还值得进一步讨论。设计方法的本质贯穿于整个讨论。设计方法的本质贯穿于整个讨论中。 抗弯矩框架 抗弯矩框架也许是低，中高度的建筑中常用的体系，它具有线性水平构件和垂直构件在接头处基本刚接之特点。这种框架用作独立的体系，或者和其他体系结合起来使用，以便提供所需要水平荷载抵抗力。对于较高的高层建筑，可能会发现该本系不宜作为独立体系，这是因为在侧向力的作用下难以调动足够的刚度。 我们可以利用STRESS，STRUDL 或者其他大量合适的计算机程序进行结构分析。所谓的门架法分析或悬臂法分析在当今的技术中无一席之地，由于柱梁节点固有柔性，并且由于初步设计应该力求突出体系的弱点，所以在初析中使用框架的中心距尺寸设计是司空惯的。当然，在设计的后期阶段，实际地评价结点的变形很有必要。 支撑框架 支撑框架实际上刚度比抗弯矩框架强，在高层建筑中也得到更广泛的应用。这种体系以其结点处铰接或则接的线性水平构件、垂直构件和斜撑构件而具特色，它通常与其他体系共同用于较高的建筑，并且作为一种独立的体系用在低、中高度的建筑中。

智能避障机器人设计外文翻译

INTELLIGENT VEHICLE Our society is awash in “machine intelligence” of various kinds.Over the last century, we have witnessed more and more of the “drudgery” of daily living being replaced by devices such as washing machines. One remaining area of both drudgery and danger, however, is the daily act ofdriving automobiles 1.2 million people were killed in traffic crashes in 2002, which was 2.1% of all globaldeaths and the 11th ranked cause of death . If this trend continues, an estimated 8.5 million people will be dying every year in road crashes by 2020. In fact, the U.S. Department of Transportation has estimated the overall societal cost of road crashes annually in the United States at greater than $230 billion. When hundreds or thousands of vehicles are sharing the same roads at the same time, leading to the all too familiar experience of congested traffic. Traffic congestion undermines our quality of life in the same way air pollution undermines public health.Around 1990, road transportation professionals began to apply them to traffic and road management. Thus was born the intelligent transportation system(ITS). Starting in the late 1990s, ITS systems were developed and deployed. In developed countries, travelers today have access to signifi-cant amounts of information about travel conditions, whether they are driving their own vehicle or riding on public transit systems. As the world energy crisis, and the war and the energy

论文《人工智能》---文献检索结课作业

人工智能 【摘要】：人工智能是一门极富挑战性的科学，但也是一门边沿学科。它属于自然科学和社会科学的交叉。涉及的学科主要有哲学、认知科学、数学、神经生理学、心理学、计算机科学、信息论、控制论、不定性论、仿生学等。人工智能(Artificial Intelligence)，英文缩写为AI。它是研究、开发用于模拟、延伸和扩展人的智能的理论、方法、技术及应用系统的一门新的技术科学。人工智能是计算机科学的一个分支，它企图了解智能的实质，并生产出一种新的能以人类智能相似的方式做出反应的智能机器，该领域的研究包括机器人、语言识别、图像识别、自然语言处理和专家系统等1。 【关键词】：人工智能；应用领域；发展方向；人工检索。 1．人工智能描述 人工智能(Artificial Intelligence) ，英文缩写为AI。它是研究、开发用于模拟、延伸和扩展人的智能的理论、方法、技术及应用系统的一门新的技术科学2。人工智能是计 算机科学的一个分支，它企图了解智 能的实质，并生产出一种新的能以人 类智能相似的方式作出反应的智能 机器，该领域的研究包括机器人、语 言识别、图像识别、自然语言处理和 专家系统等。“人工智能”一词最初 是在1956 年Dartmouth学会上提出 的。从那以后,研究者们发展了众多 理论和原理,人工智能的概念也随之扩展。人工智能是一门极富挑战性的科学，从事这项工作的人必须懂得计算机知识，心理学和哲学。人工智能是包括十分广泛的科学，它由不同的领域组成，如机器学习，计算机视觉等等，总的说来，人工智能研究的一个主要目标是使机器能够胜任一些通常需要人类智能才能完成的复杂工作。但不同的时代、不同的人对这种“复杂工作”的理解是不同的。例如繁重的科学和工程计算本来是要人脑来承担的，现在计算机不但能完成这种计算, 而且能够比人脑做得更快、更准确，因之当代人已不再把这种计算看作是“需要人类智能才能完成的复 1.蔡自兴，徐光祐.人工智能及其应用.北京：清华大学出版社，2010 2元慧·议当人工智能的应用领域与发展状态〖Ｊ〗．2008

智能家居医疗保健中英文对照外文翻译文献

智能家居医疗保健中英文对照外文翻译文献 (文档含英文原文和中文翻译) 原文： Foreign Literature Increasing an individual’s quality of life via their intelligent home The hypothesis of this project is: can an individual’s quality of life be increased by integrating “intelligent technology”into their home environment. This hypothesis is very broad, and hence the researchers will investigate it with regard to various, potentially over-lapping, sub-sections of the population. In particular, the project will focus on sub-sections with health-care needs, because it is believed that these sub-sections will receive the greatest benefit from this enhanced approach to housing. Two research questions flow from this hypothesis: what are the health-care issues that could be improved via “intelligent housing”, and what are the technological issues needing to be solved to allow “intelligent housing”to be constructed?

商业建筑外文文献翻译)

Commercial Buildings Abstract: A guide and general reference on electrical design for commercial buildings is provided. It covers load characteristics; voltage considerations; power sources and distribution apparatus; controllers; services, vaults, and electrical equipment rooms; wiring systems; systems protection and coordination; lighting; electric space conditioning; transportation; communication systems planning; facility automation; expansion, modernization, and rehabilitation; special requirements by occupancy; and electrical energy management. Although directed to the power oriented engineer with limited commercial building experience, it can be an aid to all engineers responsible for the electrical design of commercial buildings. This recommended practice is not intended to be a complete handbook; however, it can direct the engineer to texts, periodicals, and references for commercial buildings and act as a guide through the myriad of codes, standards, and practices published by the IEEE, other professional associations, and governmental bodies. Keywords: Commercial buildings, electric power systems, load characteristics 1. Introduction 1.1 Scope This recommended practice will probably be of greatest value to the power oriented engineer with limited commercial building experience. It can also be an aid to all engineers responsible for the electrical design of commercial buildings. However, it is not intended as a replacement for the many excellent engineering texts and handbooks commonly in use, nor is it detailed enough to be a design manual. It should be considered a guide and general reference on electrical design for commercial buildings. 1.2 Commercial Buildings The term “commercial, residential, and institutional buildings”as used in this chapter, encompasses all buildings other than industrial buildings and private dwellings. It includes office and apartment buildings, hotels, schools, and churches, marine, air, railway, and bus terminals, department stores, retail shops, governmental buildings, hospitals, nursing homes, mental and correctional institutions, theaters, sports arenas, and other buildings serving the public directly. Buildings, or parts of buildings, within industrial complexes, which are used as offices or medical facilities or for similar nonindustrial purposes, fall within the scope of this recommended practice. Today’s commercial buildings, because of their increasing size and complexity, have become more and more dependent upon adequate and reliable electric systems. One can better understand the complex nature of modern commercial buildings by examining the systems, equipment, and facilities listed in 1.2.1. 1.2.2 Electrical Design Elements In spite of the wide variety of commercial, residential, and institutional buildings, some electrical design elements are common to all. These elements, listed below, will be discussed generally in this section and in detail in the remaining sections of this recommended practice. The principal design elements considered in the design of the power, lighting, and auxiliary systems include: 1) Magnitudes, quality, characteristics, demand, and coincidence or diversity of loads and load factors 2) Service, distribution, and utilization voltages and voltage regulation 3) Flexibility and provisions for expansion