C-P32-1 5v2A充电器中规承认书

深圳市比利维科技有限公司

SPECIFICATION FOR

APPROVAL

BLW050200UCCH CUSTOMER:MODEL NO.:

CUSTOMER P/N:XHY P/N:

REV.DATE:

2015-1-13

.

DESCRIPTION: Input:100-240Vac ;Output:5.0Vdc2.0A, SMPS Adapter

CUSTOMER APPROVED SIGNATURE

APPROVED BY:CHECKED BY: TESTED BY:

DATE:DATE:DATE:

Please send one copy of this specification back after you sign and approve for production ISSUED BY CHECKED BY APPROVED BY

SHENZHEN BELIVE TECHNOLOGY CO., LTD.

地址：中国广东深圳市宝安区西乡镇固戍村南昌社区万豪大厦九楼

电话：0755-********

传真：0755-********

1.SCOPE

This document details the electrical, mechanical and environmental specifications of a switching power supply.

1.1Description

Wall Mount Desk-Top

Open Frame Others

2.INPUT REQUIREMENTS

2.1Input Voltage & Frequency

The range of input voltage is from90Vac to264Vac

Min.Normal Max.

Input Voltage90Vac100-240Vac264Vac

Input Frequency47Hz50/60Hz63Hz

2.2Current

The maximum input current is0.3A max. at 100-240Vac.

2.3Inrush Current

The inrush current will not exceed80A at 100-240Vac input and Max load for

a cold start at 25℃.

2.4 Stand-By Power

The input power should be less than0.3W with No-Load.

3.OUTPUT FEATURES

3.1Output Parameters

Output Data Spec. Limit Test Condition

3.1.1 5.0Vdc Min Value Typical Max Value

3.1.2Output Voltage

4.75

5.00 5.35 0 ～ 2.0A Loading

3.1.3Output Load0.0A—

3.1.4Ripple and Noise——100MV

20MHz Bandwidth 47uF Ele. Cap.0.1uF

Cer. Cap.

3.1.5Output power——10W MAX MAX. load(2.0A) & 100-240Vac

ISSUED BY:CHECKED BY:APPROVED BY:成浪XHY P/N:REV.DATE SHEET

9.2.4IEC61000-4-5 Lightning Surge Attachment

Lightning Surge voltage of differential and common modes shall be applied

across AC input lines and across input and frame ground.

Power Line to Line: 1KV

Line to Earth : 2KV

Performance Criterion B.

9.2.5IEC61000-4-6 Conducted Radio Frequency Disturbances (CS)

Conducted Radio Frequency Disturbances Test, CS, 0.15-80 MHz, 3V/m,

80%AM, 1KHz, Performance Criterion A.

9.2.6IEC61000-4-11 Voltage Dips/Short Interruption/Variations

Voltage Dips, 30% reduction- 10ms, Performance Criterion B, 60%

Reduction – 100ms, Performance Criterion C, Voltage Interruptions>95%

Reduction- 5000ms, Performance Criterion C.

10.OTHER REQUIREMENTS

10.1Hazardous Substances

The components and used materials shall be in compliance with

EU Directive 2002/95/EC "RoHS"

EU Directive 2002/96/EC "WEEE"

10.2Energy Efficiency

10.2.1The No-Load power consumption shall be less than0.3W at input115/230Vac,60/50Hz

10.2.2The average active mode efficiency shall be higher than64.48%at input

115/230Vac,60/50Hz

10.2.3International Efficiency Level IV

Korea Energy Efficiency Label

10.2.4This power supply is therefore in compliance with the requirements of

California Energy Commission for external power supplies (CEC)

Energy Star requirements for external power supplies(EPS Version 2.0)

EU Code of Conduct on Energy Efficiency of External Power Supplies (Version 4)

Australian and New Zealand Energy Performance Requirements for external

power supplies (MEPS)

China Energy Efficiency requirements for external power supplies (GB20943-2007)

Korea regulation on Energy Efficiency Labeling and Standards for external

power supplies (MKE’s Notification 2008-99)

Implementing Directive 2009/125/EC of the European Parliament and of the Council

with regard to ecodesign requirements for no-load condition electric power consumption

and average active efficiency of external power supplies (No 278/2009 ,Stage 1) ISSUED BY:CHECKED BY:APPROVED BY:成浪

11.APPENDIX

Appendix A (Until:mm)

ISSUED BY:

CHECKED BY:APPROVED BY:成浪

45±1

3

5.1±123±1

16±0.35

输入:100-240V~ 50/60Hz 0.5A 输出:5.0V 2000mA

型号:XHY050200UCCH

深圳市兴和源科技有限公司

V

电源适配器