RPI-243中文资料
RS PRO IPM 243F 电源电流计说明书
ENGLISHSpecifications:(All at 23℃±5℃,≦80% R.H.) Voltage:Function Range Accuracy*DCV 99.99V±(0.7% + 2dgt) 999.9VACV 99.99V ±(1.0% + 5dgt)50 ~ 500Hz 999.9VHFR ACV 99.99V 50 ~ 60Hz ±(1% + 5dgt)>60 ~ 400Hz ±(5% + 5dgt) 999.9V* DCV <1000dgt, add 6 dgt to the accuracy.ACV <1000dgt, add 3 dgt to the accuracy.Overload protection: 1000V rmsInput Impedance:3.5MΩ // <100pFAC Conversion Type: AC Conversions are ac-coupled, true RMS responding, calibrated to the RMS value of a sine wave input. Accuracies are given for sine wave at full scale and non-sine wave below half scale. For non-sine wave (50/60Hz) add the following Crest Factor corrections:For Crest Factor of 1.4 to 2.0, add 1.0% to accuracy.For Crest Factor of 2.0 to 2.5, add 2.5% to accuracy.For Crest Factor of 2.5 to 3.0, add 4.0% to accuracy.CF 3 @ 460V, 280A2 @ 690V,420AAC+DC V rms Accuracy: same as ACV spec. +DCV spec.Current:Function Range AccuracyDCA 99.99A ± (1.5% + 0.2A) 599.9A ± (1.5% + 5dgt)**ACA 0.10A ~ 99.99A 50 ~ 60Hz ± (1.5% + 5dgt) **>60 ~ 400Hz ± (2% + 5dgt) ** 599.9AHFR ACA 0.10A ~ 99.99A 50 ~ 60Hz ± (1.5% + 5dgt) **>60 ~ 400Hz ± (5% + 5dgt)** 599.9A** The measured value <1000dgt, add 5 dgt to the accuracy.Overload protection: 600A rmsPosition Error: ±1% of reading.AC Conversion Type and additional accuracy is same as AC Voltage.AC+DC A rms Accuracy: Same as ACA spec + DCA spec.－DCA affected by the temperature and the residual magnetism. Press HOLD key > 2sec to compensate it.Peak Hold: Peak MAX / Peak MINFunction Range AccuracyACV 140.0V± (3.0% + 15dgt) 1400VACA 140.0A± (3.0% + 15dgt) 850AOverload protection: 1000 V rms, 600 ArmsAccuracy defined for:Sine wave, ACV>5Vrms / ACA≧5Arms, Freq.50~400Hz.－Only suitable for the repetitive events.Frequency:Function Range AccuracyFrequency20.00 ~ 99.99Hz± (0.5% + 3dgt) 20.0 ~ 999.9Hz0.020 ~ 9.999KHzOverload protection: 1000 V rms, 600 A rmsSensitivity:10~100Vrms for AC 100V range10~100Arms for AC 100A range (>400Hz Unspecified)100~1000Vrms for AC 1000V range100~600/1000Arms for AC 600A/1000A range (>400Hz Unspecified) - Reading will be 0.0 for signals below 10.0 Hz.Total Harmonic Distortion:Function Range AccuracyACA /ACV 99.9% ± (3.0% + 10dgt)Harmonic distortion measurement:Harmonic order Range AccuracyH01 ~ H1299.9% ± (5% + 10dgt)H13 ~ H25 ± (10% + 10dgt)Overload protection: 1000 V rms, 600 A rms－If ACV<10Vrms or ACA <10Arms, it will display “rdy”.－If the fundamental frequency out of range 45 ~ 65Hz, it will display “out.F”.Inrush Current:Function Range AccuracyACA 99.99A ± (2.5% + 0.2A) 599.9A ± (2.5% + 5dgt)Overload protection: 1000 V rms, 600 A rmsAccuracy defined for:Sine wave, ACA≧10Arms, Freq. 50/60Hz- Integration time about 100msActive Power: Watt (DC/AC)Function Range AccuracyACW / DCW 9.999 kW**A,error×V,reading+V,error×A,reading 99.99 kW599.9KW** The measured value<1.000kW，add 10 dgt to the accuracy.Overload protection: 1000 V rms, 600 A rmsAccuracy defined for:ACW: Sine wave , ACV≧10 V rms, ACA≧5 Arms Freq. 50~60Hz, PF=1.00 DCW: DCV ≧10V , DCA ≧5 APower Factor:Function Range Accuracy*PF 1.00 ±5dgtOverload protection: 1000 V rms, 600 A rmsResistance & Continuity & Diode:Function Range AccuracyResistance 999.9 Ω± (1.0% + 5dgt) 9.999 kΩ± (1.0% + 3dgt) 99.99 kΩContinuity 999.9 Ω± (1.0% + 5dgt)Diode 0.40~ 0.80V ± 0.1VOverload protection: 1000V rmsMax. Test Current: Approx. 0.5mAMaximum Open Circuit Voltage for Ω, Continuity: Approximate 3V Maximum Open Circuit Voltage for diode: Approximate ±1.8V Continuity Threshold : ＜30Ω Beep ON, ＞100Ω Beep OFF Continuity Indicator: 2 KHz Tone BuzzerContinuity response time: < 100msCapacitance:Function Range AccuracyCapacitance 3.999 μF± (1.9% + 8dgt) 39.99 μF399.9 μF3999 μFOverload protection：1000 V rmsFlex AC Current (voltage input):Function Range(1mV/1A) Accuracy* ACA 300.0A/3000A 1%+5dgt (50~500Hz) **HFR ACA 300.0A/3000A1%+5dgt(50~60Hz) ** 5%+5dgt(61~400Hz) **Peak 420.0A/4200A 3%+80dgt(50~500Hz) INRUSH 300.0A/3000A 2%+10dgt(50/60Hz) Frequency 99.99Hz/999.9Hz 0.5%+3dgt(<500Hz) THD 99.9% 5%+10dgtHarmH01-H1299.9% 5%+10dgt*The accuracy of ICA 10T/18T is not included.**ACA <300dgt, add 3 dgt to the accuracy.Overload protection: 1000V rmsTrigger level of INRUSH: 1% of current range。
罗克泰特产品243技术数据表说明书
Technical Data Sheet Product 243Worldwide Version, October 1995NOT FOR PRODUCT SPECIFICATIONS.THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.PLEASE CONTACT LOCTITE CORPORATION QUALITY DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS ON SPECIFICATIONS FOR THIS PRODUCT.ROCKY HILL, CT FAX: +1 (860)-571-5473 DUBLIN, IRELAND FAX: +353-(1)-451 - 9959PRODUCT DESCRIPTIONLOCTITE ® Product 243 is a single component anaerobic threadlocking material, which is thixotropic and develops medium strength. The product cures when confined in theabsence of air between close fitting metal surfaces and is particularly suitable for less active substrates such as stainless steel and plated surfaces.TYPICAL APPLICATIONSPrevents loosening and leakage of threaded fasteners.Particularly suitable for applications such as pump or motor mounting bolts, engine rocker nuts or equipment housing screws, where disassembly with hand tools is required for servicing.PROPERTIES OF UNCURED MATERIALTypicalValueRangeChemical Type Dimethacrylate EsterAppearanceOpaque Blue Fluorescent LiquidSpecific Gravity @ 25°C1.08Viscosity @ 25°C, mPa.s (cP) Brookfield RVT***************12,0006,000 to 18,000 @ 20 rpm2,2501,500 to 3,000 DIN 54453, MVD = 129 s -1 after t=180secs 350250 to 500Flash Point (TCC), °C>93TYPICAL CURING PERFORMANCECure speed vs. substrateThe rate of cure will depend on substrate used. The graph below shows the breakaway strength developed with time on M10 steel nuts and bolts compared to different materials and tested according to IS0 10964.S te elZ i nc Di c hr om at eS t ai n l es s S t ee lB r a s s5min 10min30min 1hr3hr6hr24hr72hrCure Time, Hours255075100% o f F u l l S t r e n g t h o n S t e e lCure speed vs. bond gapThe rate of cure will depend on the bondline gap. Gaps in threaded fasteners depend on thread type, quality and size.The following graph shows shear strength developed with time on steel pins and collars at different controlled gaps and tested according to ISO 10123.5min 10min 30min 1hr3hr 6hr 24hr 72hrCure Time, Hours255075100% o f F u l l S t r e n g t h o n S t e e l0.15m m0.05m m0.25m mCure speed vs. temperatureThe rate of cure will depend on the ambient temperature.Graph below shows the breakaway strength developed with time at different temperatures on M10 steel nuts and bolts and tested according to IS0 10964.5min 10min 30min 1hr3hr 6hr 24hr 72hrCure Time, Hours255075100% o f F u l l S t r e n g t h o n S t e e l22°C40°C5 °CCure speed vs. activatorWhere cure speed is unacceptably long, or large gaps are present, applying activator to the surface will improve cure speed. The graph below shows breakaway strength developed with time using ACTIVATOR N and T on M10 Zinc Dichromate steel nuts & bolts and tested according to IS010964.5min 10min30min 1hr3hr6hr24hr72hrCure Time, Hours255075100% o f F u l l S t r e n g t h o n S t e e lAct. TN oA c t i v a t o r A c t NTYPICAL PROPERTIES OF CURED MATERIAL Physical PropertiesCoefficient of thermal expansion, ASTM D696, K -180 x10-6Coefficient of thermal conductivity, ASTM C177, W.m -1 K -10.1Specific Heat , kJ.kg -1 K -10.3Loctite UK Limited, Watchmead,Welwyn Garden City, Herts, AL7 1JB Technical Services Tel: (01707) 358888Customer Services Tel: (01707) 358844TDS 243 October 1995Loctite is a Registered Trademark of Loctite Corporation, Hartford, CT 06106PERFORMANCE OF CURED MATERIAL(After 24 hr at 22°C on M10 steel nuts & bolts)TypicalValue Range Breakaway Torque, IS0 10964 (4.3), N.m 2015 to 25 (lb.in)(180)(130 to 220)Prevail Torque, IS0 10964 (4.5) , N.m 7 4 to 10 (lb.in)(62)(35 to 88)Breakloose Torque, DIN 54454, N.m 2414 to 34 (lb.in)(210)(120 to 300)Max. Prevail Torque, DIN 54454, N.m 2414 to 34 (lb.in)(210)(120 to 300)TYPICAL ENVIRONMENTAL RESISTANCE Test Procedure :Breakloose Torque, DIN 54454Substrate:M10 Zinc Phosphate Nuts&Bolts Cure procedure: 1 week at 22°C Hot StrengthTested at temperature.050100150255075100% R T S t r e n g t hTemperature, °CHeat AgeingAged at temperature indicated and tested at 22°C.01,0002,0003,0004,0005,0000255075100125Hours% I n i t i a l S t r e n g t h , a t R T120°C150°C100°C Chemical / Solvent ResistanceAged under conditions indicated and tested at 22°C.SolventTemp.% Initial Strength retained at100 hr 500 hr 1000 hr 5000 hr Motor Oil125°C 95959595Leaded Petrol 22°C 1001009595Brake Fluid22°C 100100100100Water/Glycol (50%/50%)87°C 95808080Ethanol 22°C 100858585Acetone22°C1001008585GENERAL INFORMATIONThis product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidising materials.For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).Where aqueous washing systems are used to clean the surfaces before bonding, it is important to check for compatibility of the washing solution with the adhesive. In some cases these aqueous washes can affect the cure and performance of the adhesive.This product is not normally recommended for use on plastics (particularly thermoplastic materials where stress cracking of the plastic could result). Users are recommended to confirm compatibility of the product with such substrates.Directions for useFor best performance surfaces should be clean and free of grease. Product should be applied to the bolt in sufficient quantity to fill all engaged threads. This product performs best in thin bond gaps, (0.05mm). Very large thread sizes may create large gaps which will affect cure speed and strength.This product is designed to give controlled friction,(torque/tension ratio), during assembly. In critical tightening applications this ratio should be confirmed.StorageProduct shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8°C to 28°C (46°F to 82°F) unless otherwise labelled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused product, do not return any material to its original container. For further specific shelf life information,contact your local Technical Service Centre.Data RangesThe data contained herein may be reported as a typical value and/or range (based on the mean value ±2 standard deviations). Values are based on actual test data and are verified on a periodic basis.NoteThe data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user's responsibility to determine suitability for the user's purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof. In light of the foregoing, Loctite Corporation specifically disclaims all warranties expressed or implied,including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Loctite Corporation’s products. Loctite Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a licence under any Loctite Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide.This product may be covered by one or more United States or foreign patents or patent applications.。
UT243谐波检测仪中文说明书
Power and Harmonics Clamp Meters 钳形谐波功率计目 录一.------------------------------------------------------------------------1 安全警告二.----------------------------------------------------------------------------2特点三.------------------------------------------------------------------------3技术规格四.----------------------------------------------------------------------9仪表布局图五.-----------------------------------------------------------------------12按键功能六.测量前的准备-------------------------------------------------------------------14七.-------------------------------------------------------------------14电能测量功能八.谐波测量功能-------------------------------------------------------------------32九.-----------------------------------------------------------------------37设置模式十.---------------------------------------------------------------------39电池的更换十一.-------------------------------------------------------------------40保养与维护 优利德公司担保本产品自购买之日起一年内，在材料和工艺上均无任何缺陷。
乐泰 243TDS
Technical Data SheetProduct 243Worldwide Version, October 1995产品简介LOCTITE 产品243是一种单组份、触变性粘度及中强度厌氧性螺纹锁固胶。
本品在两个紧密配合的金属表面间， 并与空气隔绝时固化。
特别适用于活性较差的表面，如：不锈钢和电镀表面。
典型用途避免螺纹紧固件的松动和渗漏。
特别适用于固定泵类或电动机螺栓、发动机气门摇臂螺母或设备壳体螺丝等需要用手动工具拆卸的场合。
固化前的特性 典型值 允许范围 化学类型 二甲基丙烯酸酯 外观 具有荧光性 比重 @ 25癈 1.08 粘度 @ 25 C, mPa.s (cP)Brookfield RVT 3＃转子， 2.5转/分 12,000 6,000 to18,00020转/分2,250 1,500 to 3,000 DIN 54453, MV D = 129 s-1 after t=180秒350 250 to 500 闪点 (TCC), C >93典型固化性能固化速度与被粘材料的关系固化速度取决于被粘材料的种类。
下图所示是根据 IS0 10964测试的，243在M10钢螺母和螺栓与其它材料上，在不同固化时间下的破坏强度。
S t e lZ i n c D h r o m a t eSt a i n l e s s S t e e l B r a s5m i n 10m i n 30m i n 1h r 3h r 6h r 24h r72h r C u r e T i m e , H o u r s255075100% o f F u l S t r e n g h固化速度与粘接间隙的关系固化速度取决于粘接间隙的大小。
螺纹紧固件的配和间隙取决于螺纹的种类、精度及尺寸。
下图所示是根据ISO 10123测试的243在不同间隙的钢销和销套上，在不同固化时间下的剪切强度。
5m i n 10m i n 30m i n 1h r 3h r 6h r 24h r72h r C u r e T i m e , H o u r s255075100% o f F u l S t r e n g h0.15m0.5m 0.25m固化速度与温度的关系固化速度取决于周围温度的不同情况。
鬼兽HP EliteDisplay E243i 24英寸监视器技术规格说明书
HP EliteDisplay E243i 24-inch Monitor1. Power light LED:fully powered = whitesleep mode = ambersleep timer mode = flashing amber2. Menu Press to open the OSD menu, select a menu item from the OSD, or close the OSD menu.3-5. Function buttons Use these buttons to navigate through the OSD menu based on the indicators next to the buttons that are activated while the OSD menu is open.6. Power button Turns the monitor on or off.1. Power Connector2. DisplayPort™ 1.2 (input)3. HDMI 1.44. VGA5. USB 3.0 upstream port6. USB 3.0 downstream portModels 1FH49AA/1FH49A8/1FH49AC/1FH49ASPanel Type 24-inch IPS Micro Edge, LED BacklitViewable Image Area(diagonal)60,96 cm (24 in) widescreen; diagonally measuredPanel Active Area(W x H)51,84 x 32,4 cm (20.41 × 12.76 in.)Panel Type IPSResolution 1920 x 1200 @ 60 HzAspect Ratio 16:10Viewing Angle (typical) Up to 178° horizontal/178° vertical (10:1 minimum contrast ratio)Brightness (typical)* 300 cd/m²Contrast Ratio (typical)* 1,000:1Dynamic Contrast Ratio (typical)* 50,000,000:1Response Time (typical)* 5msPixel Pitch 0.27 mmBacklight Lamp Life(to half brightness)30,000 hours minimumColor Support** Up to 16.7 million colors with the use of FRC technologyColor Gamut 99% sRGBSurface Hardness 3HFlicker Free YesLow Blue Light Capable Yes, user selectable in OSD MenuAnti-Glare Yes*All performance specifications represent the typical specifications provided by HP's componentmanufacturers; actual performance may vary either higher or lower.** With the use of FRC technology.User Controls On Screen Display(OSD)User Controls Brightness, Contrast, Color Control, Input Control, Image Control, Power Control, Menu Control, Management, Language, Information, ExitMonitor Control Buttons or Switches Menu/OK, Minus ("-")/Down/Information, Plus ("+") /Up/Viewing Mode Menu, Exit/Back/Next Input Port, PowerUser-Assignable Function Buttons Yes, 20Languages10 (English, Spanish, German, French, Italian, Netherlands,Portuguese, Japanese, T-Chinese and S-Chinese)Signal Interface/ Performance Horizontal Frequency30-80 kHzVertical Frequency50 - 60 HzNative Resolution1920 x 1200 @ 60 Hz Preset VESA Graphic Modes (non-interlaced)640 x 480 @ 60Hz720 x 400 @ 70 Hz800 x 600 @ 60 Hz1024 x 768 @ 60 Hz1280 x 720 @ 60 Hz1280 x 800 @ 60 Hz1280 x 1024 @ 60 Hz1440 x 900 @ 60 Hz1600 x 900 @ 60 Hz1680 x 1050 @ 60 Hz1920 x 1080 @ 60 Hz Maximum Pixel Clock Speed170 MHzDefault Color Temperature Neutral (6500)VIDEO/OTHER INPUTSConnector Types DisplayPort™(1) DisplayPort™ 1.2HDMI (1) HDMI 1.4VGA (1) VGAHDCP support Yes, HDMI and DisplayPort™Audio N/AUSB PortSpecificationsUSB Version 3.0USB Ports (3) USB 3.0 ports (2 downstream and 1 upstream) Cables Included Video Cables Included(1) VGA 1,8 m (5.9 ft), (1) DisplayPort™1,8 m (5.9 ft) USB Cables Included (1) USB B to A cable 1,8 m (5.9 ft)Power Power Supply InternalInput Power100 – 240 VAC at 50/60 HzTypical Power135 WMaximum Power245 WEnergy Saving/Standby Mode0.5 WPower Cable Length1,9 m (6.2 ft)DIMENSIONS AND WEIGHTMechanical Dimensions (W x D x H) Unpacked w/stand(highest setting) 53,2 x 21,39 x 36,23 cm (20.94 x 8.43 x 14.26 in)Unpacked w/o stand (head only) 53,20 x 35,13 x 4,64 (20.95 x 18.83 x 1.83 in)Packaged 62,5 x 42 x 27,3 cm(24.61 x 16.54 x 10.75 in)Weight Head Only 3,66 kg (8.07 lb)Unpacked 6,36 kg (14.02 lb)Packaged8,95 kg (19.73 lb) MONITOR FEATURESPlug and Play YesColor Silver on facing bezel, side frame, column stand and foot; black on rearcover and stand center trimCable Management Yes, integrated into column stand. Effortlessly route cables throughthe column stand for easy management of power, video, and USBcablesDetachable Stand Yes, ships detachedTilt Range–5° to + 23° verticalSwivel Range45°L to 45°RDisplay heightadjustment:Adjustment Range: 150 mmPivot Rotation Yes, 90° clockwise and counter-clockwiseVESA Mounting Yes, 100 mm with integrated mountSecurity Lock-Ready YesENVIRONMENTALSpecifications Temperature - Operating5° to 35° C (41° to 95° F)Temperature - Non-operating –20° to 60° C (-4° to 140° F)Humidity - Operating 20% to 80% Relative Humidity non-condensingHumidity - Non-operating 5% to 95%, 38.7° C max wet-bulbAltitude - Operating 0 to 5,000 m (0 to 16,404 ft)Altitude – Non-operating 0 to 12,192 m (0 to 40,000 ft)White LED Backlights YesCCFL Panel NoArsenic-Free Display Glass YesLow Halogen3Yes (except cables) Mercury-Free Display Backlights YesOPTIONS (Each sold separately)HP Single Monitor Arm —BT861AAThe flexible design of the HP Single Monitor Arm provides a seeminglyendless range of display adjustments with an amazing 13 inches of lift,50 degrees of tilt, and 360 degrees of pan and rotation – all at yourfingertips -- helping you stay comfortable and productive throughoutthe day.HP B300 PC Mounting Bracket —2DW53AAAttach your HP Workstation, HP Desktop Mini, HP Chromebox or selectHP Thin Client directly behind select 2017 and 2018 HP EliteDisplaysand HP Z Displays with the HP B300 PC Mounting Bracket.7HP S100 Speaker Bar — 2LC49AA Add rich stereo sound to select 2017 and 2018 HP ProDisplays, HPEliteDisplays, and HP Z Displays7 without crowding your desk with theHP S100 Speaker Bar, which fits neatly underneath the display headand connects through USB.HP HDMI Standard Cable Kit —T6F94AAUse the cable to connect your desktop to your standard HDMI devicesand displays.HP Quick Release Bracket —EM870AA6An easy-to-use, VESA-compliant, LCD monitor mounting solution thatallows you to quickly and securely attach an LCD monitor to a variety ofstands, brackets, arms or mounts. For more information, refer to thisproduct's QuickSpecs document.HP Integrated Work Center forDesktop Mini and Thin Client —G1V61AADesigned to provide convenient access to the Desktop Mini andselect Thin Clients to help maximize the use of limited desk spacewithout compromising performance or productivity. It will supportmany HP 17 to 24-inch diagonal LCD monitors, with VESA standardmounting brackets. For more information, refer to this product'sQuickSpecs document.WHAT’S IN THE BOX?What’s in the box?Monitor and Accessories HP EliteDisplay E243i 24-inch Monitor, AC power cord, VGA cable,DisplayPort™ 1.2 cable, USB B to A cable.Documentation CD, documentationOther Software included HP Display AssistantUser Guide Languages English, Arabic, S. Chinese, T. Chinese, Czech, Danish, Dutch, Finnish,French, German, Greek, Hungarian, Italian, Japanese, Kazakh, Korean,Norwegian, Polish, Brazilian Portuguese, Russian, Slovenian, Spanish,Swedish and Turkish.Warranty Languages English, Arabic, S. Chinese, T. Chinese, Czech, Danish, Dutch, Finnish,French, German, Greek, Hungarian, Italian, Japanese, Kazakh, Korean,Norwegian, Polish, Brazilian Portuguese, Russian, Slovenian, Spanish,Swedish and Turkish.Country of Origin ChinaCERTIFICATION AND COMPLIANCECertification and Compliance ENERGY STAR®, EPEAT® Gold4, CEL Grade 2, Microsoft WHQL Certification (Windows 7,8 and 10), TCO Certified Edge, SmartWay Transport Partnership (NA SKU), CE, CB, MSIP, Mexico COC, ICES, ISO 9241-307, TUS-GS, cTUVus, ISC, CCC, VCCI, FCC, BSMI, WEEE, RCM, ErP, S-markCompatibility Compatible with platforms using the VESA standard video modes. Recommended for use with HP products.Service and Warranty Protected by HP, including a 3 year standard limited warranty. Optional HP Care Pack Services are extended service contracts that extend your protection beyond the standard warranties.5Copyright © 2017 HP Development Company, L.P.The information contained herein is subject to change without notice. The only warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.DisplayPort™ and the DisplayPort™ logo are trademarks owned by the Video Electroni cs Standards Association (VESA®) in the United States and other countries.Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. ENERGY STAR is a registered trademark owned by the U.S. Environmental Protection Agency.1.Default Power is measured with factory defaults, including factory default brightness and USB ports loaded at 25% of maximum.2.Maximum Power is measured with monitor at maximum brightness and with USB ports loaded at 100% of maximum.3.External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may notbe Low Halogen.4.EPEAT® registered where applicable/supported. EPEAT registration varies by country. See for registration status bycountry.5.Service levels and response times for HP Care Pack Services may vary depending on your geographic location. Service starts fromdate of hardware purchase. Restrictions and limitations apply. See /go/cpc for details.6.The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mountingsurfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other thanthe VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or constructionprofessional to determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that your mounting solution is properly installed to support applied loads.7.Sold separately. See product QuickSpecs for exact device and display compatibility.。
Loctite243技术资料
汉高乐泰亚太 +81.45.758.1810
使用指南
装配
1. 为了获得最佳效果，使用诸如乐泰ODC free清洗剂彻 底清洗材料内外表面，并干燥.
2. 如果材质为非活泼金属或未知材料，在配合面喷洒促 进剂7471™ or 7649™ ，并晾干30秒钟.
3. 使用前充分摇匀.
4. 为防止胶水阻塞施胶嘴，应避免胶嘴接触金属物质.
87
95
80
80
80
丙酮
22 100
100
85
85
乙醇
22 100
85
85
85
注意事项
本产品不宜在纯氧与（或）富氧环境中使用，不能作为氯 气或其它强氧化性物质的密封材料使用。
有关本产品的安全注意事项，请查阅乐泰的材料安全数据 资料(MSDS).
当使用清洗剂清洗材料表面时，应检查该清洗剂与胶水的 相容性。在某些情况下，使用的清洗剂可能会影响胶水的 固化和性能。
1周后 @ 22 °C 松脱力矩, ISO 10964, 预紧扭矩 to 5 N·m: M10 镀锌螺栓和螺母上测量
热强度 在测试温度下进行强度测试
100
TDS LOCTITE® 243™, 1月-2008
老化强度 在测试温度下进行老化，在22 °C进行测试
125
100
100 °C
120 °C
75
50 150 °C
0 1min 5min 10min 30min 1h 3h 6h
固化时间
24h 72h
钢材上的强度 % 初始强度
100
75
50
无促进促剂进剂 7471™
促进剂 7649™ 25
0 1min 5min 10min 30min 1h 3h 6h
RPP40-243.3S;RPP40-4805S;RPP40-4812S;RPP40-483.3S;RPP40-2405S;中文规格书,Datasheet资料
POWERLINE+DC/DC-Converterwith 3 year WarrantyRPP40 PP-25REV: 1/201240 Watt 2:1 Single &Dual Output● Up to 94°C ambient, no derating ● 120°C Maximum Case T emperature ● -45°C MinimumT emp. (optional: -55°C)● Built-in FCC/EN55022 Class B Filter ● 2:1 Wide Input Voltage Range ● 40 Watts Output Power● Ribbed, Flat or Baseplate Case Styles ● Efficiency to 92%● 3kVDC Isolation ● Fully Protected● Low Quiescent CurrentFeatures ICETechnology*Selection Guide 24V and 48V Input TypesPart Number Input Output Output Input (1) Efficiency (2) Max (3) Range Voltage Current Current (Typ.) Operating VDC VDC A mA Temp RPP40-243.3S 18-36 3.3 12 58/1885 88.4% 77°C RPP40-2405S 18-36 5 8 60/1831 91.0% 86°C RPP40-2412S 18-36 12 3.33 100/1875 87.8% 75°C RPP40-2415S 18-36 15 2.67 100/1870 89.5% 81°C RPP40-2424S 18-36 24 1.67 100/1870 89.5% 81°C RPP40-483.3S 36-75 3.3 12 42/923 90.2% 84°C RPP40-4805S 36-75 5 8 37/906 92.0% 89°C RPP40-4812S 36-75 12 3.33 5/930 88.9% 78°C RPP40-4815S 36-75 15 2.67 5/930 89.7% 81°C RPP40-4824S 36-75 24 1.67 5/930 89.7% 81°C RPP40-2412D 18-36 ±12 ±1.67 100/1870 88.4% 86°C RPP40-2415D 18-36 ±15 ±1.33 100/1870 89.8% 89°C RPP40-2424D 18-36 ±24 ±0.84 100/1870 89.8% 91°C RPP40-4812D 36-75 ±12 ±1.67 5/930 88.8% 87°C RPP40-4815D 36-75 ±15 ±1.33 5/930 89.7% 94°C RPP40-4824D 36-75 ±24 ±0.84 5/930 89.7% 94°C ** add suffixes for case, temperature or CTRL logic options.DescriptionRoHS2002/95/EC6/6UL-60950-1 Certified E224736The RPP40 series 2:1 input range DC/DC converters are ideal for high end industrial applications and COTS Military applications where a very wide operating temperature range of -45°C to +120°C is required.The converters are also optionally available with a -55°C start-up temperature. Although the case size is very compact, the converter contains a built-in filter EN55022 Class B / FCC Level B without the need for any external components. The RPP40 is available in three case styles: the high operating temperature ribbed case, the low profile flat case and the baseplate case for high vibration or bulkhead-mounting applications. They are UL-60950-1certified.* ICE TechnologyICE (Innovation in ConverterExcellence) uses state-of-the-art techniques to minimise internal power dissipation and to increase the internal temperature limits to extend the ambient operatingtemperature range to the maximum.Refer to Application NotesSUFFIX INFORMATIONnone = Standard Ribbed Case -B = Baseplate Case -F = Flat Case-L = Low Temp (-55°C) Ribbed Case -M = Low Temp (-55°C) Baseplate Case -T = Low Temp (-55°C) Flat Case add “1” before suffix for neg. CTRL logice.g. -1, -1B, -1F, etc./PP-26REV: 1/2012R P P 40Specifications (typical at nominal input and 25°C unless otherwise noted)Input Voltage Range 24V nominal input 18-36VDC 48V nominal input 36-75VDC Under Voltage Lockout 24V input DC-DC ON (min.) 17.5VDC DC-DC OFF (max.) 17VDC 48V input DC-DC ON (min.) 35VDC DC-DC OFF (max.) 34VDC Input Filter Common Mode EMC Filter Input Voltage Variation dv/dt (Complies with ETS300 132 part 4.4) 5V/ms max Input Surge Voltage (100 ms max.) 24V Input 50VDC 48V Input 100VDC Input Reflected Ripple nominal Vin and full load 30mAp-p Start Up Time nominal Vin and constant resistor load 2ms typ., 5ms max.Remote ON/OFF (4) Logic High Open or 3.0V < Vr < 5.5V Logic Low Short or 0V < Vr < 1.2V Remote OFF input current Nominal input 2mA typ.Output Power 50W max.Output Voltage Accuracy 10% Load and nominal Vin ±1%Voltage Adjustability ±10%Minimum Load 0%Line Regulation low line, high line at full load ±0.3%Load Regulation 10% to 100% full load ±0.5%Ripple and Noise (20MHz bandwith limited) 3.3V, 5V 60mVp-p typ.(measured with 1µF capacitor across output) All others 40mVp-p typ.Temperature Coefficient ±0.04%/°C max.Transient Response 25% load step change 200µs Over Load Protection % of full load at nominal Vin 120% typ.Short Circuit Protection Hiccup, automatic recovery Output Over Voltage Protection (refer to block diagram in Application Notes) Converter shutdown if Vout > Vout nominal + 20%Isolation Voltage Rated at 2250VDC/1 minute, Flash tested at 3000VDC/1 second Isolation Resistance 10M Ωmin.Isolation Capacitance (refer to block diagram in Application Notes) 3000pF max.Operating Frequency 260kHz ± 40kHz Maximum Case Temperature +120°C Storage Temperature Range -55°C to +125°C Over Temperature Protection (refer to block diagram in Application Notes) internal thermistor POWERLINE+DC/DC-ConverterRPP40-S_D SeriesDerating Graph (Ambient Temperature)Derating graphs are valid only for the shown part numbers.Please contact Technical Support for more information info@recom-development.atAmbient Temperature Range (°C)O u t p u t P o w e r (%)RPP40-4805S/RPP40 PP-27REV: 1/2012Specifications (typical at nominal input and 25°C unless otherwise noted)POWERLINE+DC/DC-ConverterRPP40 Operating Temperature Range Ambient, Free Convection -45°C to +87°C max (without derating) -55°C Version -55°C to +87°C max (without derating)Thermal Impedance Ribbed Case: Vertical 7.3°C/Watt (Natural convection Ribbed Case: Horizontal 10°C/Watt Relative Humidity 5% to 95% RH Case Material (7) Aluminium Potting Material Silicone (UL94-V0)Weight Ribbed Case 39g Flat Case 34g Basrplate Case 43g Packing Quantity Ribbed and Flat Case 4 pcs per Tube Baseplate Case Single Packed Safety Standards certified UL-60950-1, 1st Edition Thermal Cycling complies with MIL-STD-810F Vibration 10-55Hz, 12G, 30 Min. along X, Y and Z Conducted Emissions EN55022 Class B Radiated Emissions EN55022 Class B ESD EN61000-4-2 Perf. Criteria B Radiated Immunity EN61000-4-3 Perf. Criteria A Fast Transient (5) EN61000-4-4 Perf. Criteria B Surge (5) EN61000-4-5 Perf. Criteria B Conducted Immunity EN61000-4-6 Perf. Criteria A MTBF calculated according to BELLCORE TR-NWT-000332 (6) 1989 x 103 hoursNotes :1. Typical values at nominal input voltage and no load/full load.2. Typical values at nominal input voltage and full load.3. Typical values for ribbed case at nominal input voltage and full load in vertical orientation and with Eurocard-sized PCB ground planes to assist in heat dissipation. For horizontal orientation, reduce the maximum temperatures by 10°C.4. The ON/OFF pin voltage is referenced to negative input. The pin is pulled high internally. ON/OFF control is standard with positive logic: e.g. RPP40-2405SAdd “1” before the suffix for negative logic: e.g. RPP40-2405S-1, RPP40-2405S-1B Positive logic: 0= OFF, 1 = ON. The converter will be ON if the CTRL is left open.Negative logic: 1 = OFF, 0 = ON. The converter will be OFF if the CTRL is left open.5. Requires an external 100µF low ESR capacitor to meet EN61000-4-4 and EN61000-4-56. Case l: 50% Stress, Temperature at 50°C (Ground Benign).7. To ensure a good all-round electrical contact, the baseplate is pressed firmly into place within the aluminium housing.The hydraulic press can leave tooling marks and deformations to both the housing and baseplate. The case is anodised aluminium, so there will be natural variations in the case colour and the aluminium is not scratch resistant. Any resultant marks, scratches and colour varations are cosmetic only and do not affect the operation or performance of the converters.10k W Trimpot10k W Trimpot10k W TrimpotTrim+Vout-Vout Trim+Vout-VoutExternal Output TrimmingRefer to Application Notes for suggested Resistor ValuesRPP40-S_D Series/PP-28REV: 1/2012R P P 40Typical CharacteristicsRPP40-4805SInput Capacitor, C1, is required to meet EN61000 Surge and Fast Transient, otherwise it is not required for normal operation.Output Capacitors C2/C3 are recommended, but not required for normal operation. Typical capacitor values are 1µF MLCCTo ensure optimum thermal performance, use large areas of copper on the PCB to assist with heat dissipation and mount the converter vertically./RPP40 PP-29REV: 1/2012Package Style and Pinning (mm)50.805.103rd angleprojectionPin Pitch Tolerance ±0.35 mmPin ConnectionsPin # Single Dual 1 +Vin+Vin 2 -Vin -Vin 3 +Vout +Vout 4 -Vout Com 5 Trim -Vout 6 CTRL CTRL30.55.103rd angle projectionFlat Case (-F Suffix)(Low temperature version = suffix -T)Pin Pitch Tolerance ±0.35 mmPin ConnectionsPin # Single Dual 1 +Vin +Vin 2 -Vin -Vin 3 +Vout +Vout 4 -Vout Com 5 Trim -Vout 6 CTRL CTRLRibbed Case (Standard - no Suffix)(Low temperature version = suffix -L)/PP-30REV: 1/2012R P P 403rd angle projectionPin Pitch Tolerance ±0.35 mmPin ConnectionsPin # Single Dual 1 +Vin +Vin 2 -Vin -Vin 3 +Vout +Vout 4 -Vout Com 5 Trim -Vout 6 CTRL CTRLBaseplate Case (-B Suffix)(Low temperature version = suffix -M)Typical Characteristics/分销商库存信息:RECOM-POWERRPP40-243.3S RPP40-4805S RPP40-4812S RPP40-483.3S RPP40-2405S RPP40-2415S RPP40-4815S RPP40-2412D RPP40-2412D-1 RPP40-2412D-1F RPP40-2412D-F RPP40-2415D RPP40-2415D-1RPP40-2415D-1F RPP40-2415D-F RPP40-2424D RPP40-2424D-1RPP40-2424D-1F RPP40-2424D-F RPP40-2424S RPP40-2424S-1 RPP40-2424S-1F RPP40-2424S-F RPP40-4812D RPP40-4812D-1RPP40-4812D-1F RPP40-4812D-F RPP40-4815D RPP40-4815D-1RPP40-4815D-1F RPP40-4815D-F RPP40-4824D RPP40-4824D-1 RPP40-4824D-1F RPP40-4824D-F RPP40-4824S RPP40-4824S-1RPP40-4824S-1F RPP40-4824S-F RPP40-2412S RPP40-2412D-1B RPP40-2412D-B RPP40-2415D-1B RPP40-2415D-B RPP40-2424D-1B RPP40-2424D-B RPP40-2424S-1B RPP40-2424S-B RPP40-4812D-1B RPP40-4812D-B RPP40-4815D-1B RPP40-4815D-B RPP40-4824D-1B RPP40-4824D-B RPP40-4824S-1B RPP40-4824S-B RPP40-2405S/N RPP40-2412S/N RPP40-2415S/N RPP40-243.3S/N RPP40-4805S/N RPP40-4812S/N RPP40-4815S/N RPP40-483.3S/N RPP40-2412D-1M RPP40-2412D-M RPP40-2415D-1M RPP40-2415D-M RPP40-2424D-1M RPP40-2424D-M RPP40-2424S-1M RPP40-2424S-M RPP40-4812D-1M RPP40-4812D-M RPP40-4815D-1M RPP40-4815D-M RPP40-4824D-1M RPP40-4824D-M RPP40-4824S-1M RPP40-4824S-M RPP40-2412D-1L RPP40-2412D-1T RPP40-2412D-L RPP40-2412D-T RPP40-2415D-1L RPP40-2415D-1T RPP40-2415D-L RPP40-2415D-T RPP40-2424D-1L RPP40-2424D-1T RPP40-2424D-L RPP40-2424D-T RPP40-2424S-1L RPP40-2424S-1T RPP40-2424S-L RPP40-2424S-T RPP40-4812D-1L RPP40-4812D-1T RPP40-4812D-L RPP40-4812D-T RPP40-4815D-1L RPP40-4815D-1T RPP40-4815D-L RPP40-4815D-T RPP40-4824D-1L RPP40-4824D-1T RPP40-4824D-L RPP40-4824D-T RPP40-4824S-1L RPP40-4824S-1T RPP40-4824S-L RPP40-4824S-T。
阿海珐P243说明书
额定（V） 直流
24-48 48-110 110-250
工作范围（V）
直流
交流
19-65 37-150 87-300
24-110 80-265
7
频率 额定频率
50/60Hz
工作范围
45 到 65Hz
可选热电偶输入
RTD 型号：
PT100/Ni120/Ni100
最多可接 10 个
连接方式：
3 线＋屏蔽
逆功率保护（32R） MICOM P24x 保护为一 段逆功率保护，根据有功 功率的测量来避免当母线 侧电压陡降时，电动机向 系统倒送电。
独立的保护整定值组 整定值分成两类，能够分 别满足各种运行条件以及 和其他继电保护的配合需 要，特别是对双速电动机 的保护。
可编程逻辑 可编程逻辑可由用户按照 自己的要求配制保护和控 制功能。
否安装，因为面板按
保护面板上的串行通讯接 口是专门设计为 MICOM
菜单文本编辑软件 故障诊断和测量的显 示软件
IP52 保护等级设计，具 有防尘防水功能。机箱既
6
适用于框架安装，也适用 于面板安装。
重量
P241：7, 3 kg P242：9, 2 kg (包括 RTD&CLIO) P243：11, 5 kg （包 括 RTD&CLIO）
断路器失灵保护
IEC60870-5-103
（50BF）
用户界面
启动超时和阻转保护 （48/51 LR）
为了监视电动机启动过 程，MICOM P24x 提供额 外的启动时间保护和堵转 转子保护 。
控制
可编程逻辑 继电器输出自保持 （86） 断路器控制和监视 两组整定值
1A/5A 双额定 CT 输 入