MAAMML0019中文资料
Omega OM-DAQXL多通道通用输入触摸屏数据记录器用户指南说明书
e-mail:**************For latest product manuals: Shop online at User’s GuideOM-DAQXLMulti-Channel Universal InputTouch Screen Data Logger***********************Servicing North America:U.S.A.:O mega Engineering, Inc.,800 Connecticut AveNorwalk, CT 06854Toll-Free: 1-800-826-6342 (USA & Canada only)Customer Service: 1-800-622-2378 (USA & Canada only)Engineering Service: 1-800-872-9436 (USA & Canada only)Tel: (203) 359-1660 Fax: (203) 359-7700e-mail:**************For Other Locations Visit /worldwideThe information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.Section P age Section 1 - Introduction ....................................................................... 1-1 Section 2 - Hardware .......................................................................... 2-12.1 Included Items ....................................................................................................... 2-12.2 Views and Descriptions ...................................................................................... 2-2Section 3 - Sensor Wiring ..................................................................... 3-13.1 User Interface Flowchart .................................................................................... 3-23.2 Home Toolbar ........................................................................................................ 3-43.3 Add Channels ....................................................................................................... 3-53.4 Communication Setting ........................................................................................3-7Section 4 - Specifications ...................................................................... 4-14.1 General .................................................................................................................... 4-14.2 Inputs ...................................................................................................................... 4-24.3 Functions ............................................................................................................... 4-34.4 Communication .................................................................................................... 4-44.5 External I/O ........................................................................................................... 4-44.6 Dimensions ........................................................................................................... 4-5i1 IntroductionThank you for purchasing our OM-DAQXL Multi-channel touch screen datalogger.This Quick Start guide briefly describes the key operations and provides setupexamples of the OM-DAQXL so that you can quickly operate the device for thefirst time.In addition to this quick start manual, the complete User manual can bedownloaded from Omega’s website (/manuals/) . TheUser manual provides detailed information regarding all of the functions andoperations of the OM-DAQXL. Use it together with this Quick Start Manual.1-12-1After reading this manual, keep it in an easily accessible place for later reference.2 Hardware2.1 Included ItemsThe following items are supplied in the box:13Table 2-1 OM-DAQXL Included Items* Specifies the country code.HOME BUTTONFigure 2-2 OM-DAQXL Front ViewTMTable 2-2 Status LED States2-23-1what was ordered.Note: For bridge type sensors, only channels 1, 2, 3, 4, and 9, 10, 11, 12 are available.Figure 3-2 Alarm Terminal BlockTable 3-4 Alarm Terminal Block SignalsTable 3-2 Three and Four Wire Sensor ConnectionsTable 3-3 Digital I/O Cable Pinout.Figure 3-1 Digital I/O Connector Pin NumbersFigure 3-3 Menu Flowchart3-23-3NOTE: For initial login use the default account with user name and password: omega, omega. This is an administrator account allowing additional users to becreated.Home ScreenForgot PasswordLogin WindowGuest loginFigure 3-4 Menu FlowchartFigure 3-5 Home T oolbar3.1 User Interface Flowchart3.2 Home Toolbar1. T ools Button - Extends or retracts the toolbar with each tap. When thetoolbar is retracted there is additional channel information displayed inthe toolbar area.2. L og Data - The log data button is used to change the logging state of thedata logger. Depending upon the current state this button will appearwhite (free running), red (logging) or orange (armed).3. A nnotate – The annotate button freezes the current display and allowsthe user the ability to make annotations on the display using the stylus. Ascreenshot will then be saved showing the annotation.4. S creen Shot – Takes a screenshot of the current display and saves it to thememory location specified in the data session settings.5. V iews – Invokes a fly-out menu list with selections for the 4 different viewmodes as well as a selection for toggling the slide show feature.6. D isplay Channels – Invokes a fly-out menu list with selections for thefour channel groups as well as selection to bring the user to the channelgroup channel selection screen.7. A dd Channel – Opens the add channel screen with the next availablechannel selected for configuration.8. C hannel List - Opens the channel list screen which lists all the currentlyconfigured channels.9. S tored Files – Opens the stored files screen to perform various operationson files in stored in memory.10. S ettings – Invokes a fly-out menu list with selections for trigger, alarm,and data session and device settings. Each selection opens a screenwhere settings related to that function can be set and saved.11. H elp – Opens a context sensitive help screen which will display contentappropriate to the current screen. This button is present in all of thevarious UI screens.3-43.3 Add ChannelsChannel settings can be configured for new channels using the Input Typeand Data Ranges screens. To add a new input channel and configure itssettings, hit the Add Channel button on the toolbar to navigate to the InputType screen. There are two types of channels which can be configured,physical input channels and virtual math channels. Depending on the type ofchannel being configured, the Input Type screen will have different settingsavailable. The toolbar appears as shown below when adding channels.Input Setup – Physical Input ChannelThe Input Type screen is used to configure the basic settings for an inputchannel. For physical input channels the input type selected will determinethe settings available.Temperature InputsFor temperature input types the Input Type screen will appear as shownbelow.Figure 3-6 Input Type - T emperature1. C hannel Type ButtonThe channel type selects between physical and math channel input types.Temperature inputs are physical input channels.2. I nput Type SettingsFor temperature inputs there are multiple sensor types available. Theseinclude thermocouple, RTD and thermistor. Each of these sensor typeshave additional sensor sub types available. The sub type drop-downlist will populate with the appropriate subtypes for each sensor type. Achannel number, color and name must be assigned for each channel.3. C hannel MapThe channel map provides a quick view of which channels have alreadybeen configured (blue) and the currently selected channel (orange). Sometemperature input types require the use of two input channels.The Data Ranges screen appears the same for all temperature input types. Depending on the sensor type selected the fixed values shown for the input and display range will vary.Figure 3-7 Data Ranges - T emperature1. Engineering UnitsThe two drop downs allow selection of various engineering units for display. 2. I nput RangeThe input range boxes show the full measureable input of the data logger for the sensor type being configured. These are not editable. 3. D isplay RangeThe display range boxes show the full display range available on the data logger. The graph range can be any subset of this range. This range is fixed for all temperature inputs. 4. Z ero AdjustThe zero adjust provides a user configurable offset adjustment, inengineering units, which will be applied to measurements across the full range of input. 5. M oving Average FilterThis setting provides the option to average an individual channels input samples. 6. G raph RangeThe graph range is the y-axis range that will be shown on the waveform view of the data logger. This can be any subset of the display range and is defined in the assigned engineering units. It can also be adjusted on the waveform view. 7. D ecimal PlacesSelects the number of decimal places to display.Figure 3-38 Comm Settings – Ethernet1.Connection SelectionThis button is used to select the network adapter. The settings for the currently selected network adapter will be shown below. 2.DHCPThis checkbox is used to enable or disable DHCP for the currently selected network adapter. DHCP Dynamic Host Configuration Protocol (DHCP) is a client/server protocol that automatically provides an Internet Protocol (IP) host with its IP address and other related configuration information such as the subnet mask and default gateway. 3.IP AddressIf DHCP is checked the DHCP assigned IP address is shown for the selected adapter. If DHCP is not checked, a static IP address can be entered using the keypad.4.Subnet MaskIf DHCP is checked the DHCP assigned subnet mask is shown for the selected adapter. If DHCP is not checked, a subnet mask can be entered using the keypad. 5.Gateway6.If DHCP is checked the DHCP assigned gateway IP is shown for the selectedadapter. If DHCP is not checked, a gateway IP can be entered using the keypad. 7.Update 1534623.4 Communication Settings (if applicable)If you purchased a -EW data logger, your tool bar will have a communicationssettings button. The Comm settings screen is where you can configure the Ethernet or optional Wi-Fi communication settings6.6. UpdateAfter configuring the settings, hit the update button to apply the settings to the selected network adapter.3-8Figure 3-39 Comm Settings - WiFi7.SSID – Select NetworkThis dropdown selection will show all of the WiFi networks within range.8.Security KeyEnter the passphrase or security key for the selected network. If it is an open network, leave this field blank. 9.ConnectHit the connect button to connect to the selected network.3-9Wi-Fi Wi-Fi networks within range.4 Specifications4.1 GeneralDisplay: 7.0" TFT color LCD (WVGA: 800 x 480 pixels) with chemicallyhardened touch panel.Internal Memory: 1 GB FLASH MemorySD Memory Card: 32 GBUSB Flash Drive: 1GBEthernet**: 10/100 Base-T, TCP/IPUSB Wi-Fi Dongle**: 802.11 b/g/n, USB#2.0 interface, Up to 150#Mbps, WEPand WPA/WPA2 encryption schemesOperating Environment: 0 to 50°C (32 to 122°F), 0 to 95% RH non-condensingStorage Conditions: -10 to 60°C (32 to 140°F)DimensionsWith Rubber Boot: (9.00 X 6.5 X 3.5")Without Rubber Boot: (8.75 X 5.75 X 2.42")Weight: 3.2 lbs (1.45 kg)*Power Supply: AC Adapter Input:100 to 240 Vac, 50 to 60 Hz, 1.5 A maxAC Adapter Output: 12 Vdc, 5A maxBattery: Lithium Ion Rechargeable (7.2 V, 4800 mAh)Battery Life: Approximately 4-8 hours depending on display settings beforerechargeScreen Time Out: 30 sec, 1 min, 2 min, 5 min, 10 min, NeverSlide Show Timing: 5 sec, 10 sec, 15 sec, 20 sec, 30 secAuto Power Shut Down: 5 minutes after screen time outLine Graph Time Scale: From 400 msec/div up to 1 hr/divExternal Excitation Output: 24 Vdc, regulated (±2%) isolated.Maximum current output 50 mAExternal I/O: 4 digital inputs, 4 digital outputs, 4 alarm outputs,1 external trigger input.*Includes battery and rubber boot**Only available for -EW modelsNumber of Analog Inputs: 8 or 16Sampling RateM aximum Sampling Rate per Number of Channels (Analog and Digital):1 Channel: 125 s/sec2 Channels: 50 s/sec4 Channels: 25 s/sec8 Channels: 10 s/sec16 Channels: 5 s/secLogging RateM aximum logging Rate per Number of Channels (Analog and Digital):1 Channel: 125 s/sec2 Channels: 50 s/sec4 Channels: 25 s/sec8 Channels: 10 s/secMeasurement Accuracy*At room temperature after 30 minute warm up period.Input Type: Thermocouple, RTD, Thermistor, Voltage, Current, Strain GageStrain Gage Input: Only Channels 1, 2, 3, 4, 9, 10, 11, 12 are available.Frequency Update Rate: 250 msecDigital Input and Functions: Frequency, volumetric flow rate, totalization,resettable counterVirtual Math Channels 1 to 16: Math equation of any two physical channelsFilter:•Per channel selectable moving average filter: None, 2, 5, 10, 20 or 50samplesResolution: One to four decimal places depending on the Input typeStatistics: Peak to peak, average, minimum, maximum, RMSInput Sampling/Logging Rate: 125 s/sec (1 Channel), 50 s/sec (2 Channels),25 s/sec (4 Channels), 10 s/sec (8 Channels), 5 s/sec, 1 s/sec, 12 s/min,6 s/min, 2 s/min, 1 s/min, 12 s/hr, 6 s/hr, 2 s/hr, 1 s/hr (For All Channels)Logging Mode: Interval, averageTrigger Conditions (Start & Stop): Timer, date and time, weekday and time,alarm output, external triggerLogging Condition: On command or trigger condition4.3 FunctionsDisplayViews: Waveform, waveform and table, table only, digital, slide showDisplay Channels: 4 channels per group – 4 groupsStored Files: Screen capture and log (internal, SD card, USB drive)D ata Review: Up to any 4 channels – scroll or page right and left, zoom in,zoom out, annotateDevice Settings:• General – Set current Time & Date• D isplay Option – Screen Timeout, Background & Grid color, Brightness,Slide show timing, Key sound, Calibrate Touch screen• D iagnostics – Analog, Digital, Power shut down test & generate report• U ser Management – Admin, Normal User (Set User ID & Password)• A bout – Firmware UpgradeHelp:• Help screen for every menu screenVirtual Math Channels: Up to 16 virtual channels can be created.Statistics: Peak to Peak, Average, Minimum, Maximum, RMSTriggersTrigger Types:• Start, Stop, RepeatTrigger Conditions:• Timer, Date & Time, Weekday & Time, Alarm Output, External TriggerLoggingLogging Modes:• Interval, AverageLogging Conditions:• On demand or trigger conditionDigital input functions:Frequency, Volumetric flow, Totalization, Resettable counter4.4 CommunicationProtocol: Modbus TCP/IP4.5 External I/O:Alarm Outputs: 4 open collector alarm outputs rated for 0.5A @ 30 Vdc withaudible alarm buzzerDigital Outputs: 4 open collector digital outputs rated to 30 mA @ 5 Vdclogically tied to alarm outputsDigital Inputs: 4 Schmitt trigger based inputs• 0 to 24 Vdc single ended, grounded input range• Logic high threshold 2.5 V; Logic low threshold 1.5 V• Contact closure detection• Maximum input frequency: 250 kHzPower Input to Digital I/O Isolation: 1.5 kVrmsAlarm Condition: High, Low, Window In, Window Out, Open SensorOn Alarm Event: Map to 4 Alarm outputs, Sound Buzzer, Take Screen shotAlarm Type: Latch, Non-LatchAlarm per Channel: TwoDimensions: mm (inch)Note: Ethernet port is only presenton -EW models.222 (8.75)M4 INSERT SCREW146(5.75)WARRANTY/DISCLAIMEROMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product.If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department will issue an Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no charge. OMEGA’s WARRANT Y does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification. T his WARRANT Y is VOID if the unit shows evidence of having been tampered with or shows evidence of having been damaged as a result of excessive corrosion; or current, heat, moisture or vibration; improper specification; misapplication; misuse or other operating conditions outside of OMEGA’s control. Components in which wear is not warranted, include but are not limited to contact points, fuses, and triacs.OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA neither assumes responsibility for any omissions or errors nor assumes liability for any damages that result from the use of its products in accordance with information provided by OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the company will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED W ARRANTIES INCLUDING ANY W ARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of OMEGA with respect to this order, whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the component upon which liability is based. In no event shall OMEGA be liable for consequential, incidental or special damages.CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility as set forth in our basic WARRANTY /DISCLAIMER language, and, additionally, purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the Product(s) in such a manner.OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in technology and engineering.OMEGA is a trademark of OMEGA ENGINEERING, INC.© Copyright 2017 OMEGA ENGINEERING, INC. All rights reserved. T his document may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the prior written consent of OMEGA ENGINEERING, INC.FOR WARRANTY RETURNS, please have the following information available BEFORE contacting OMEGA:1. P urchase Order number under which the product was PURCHASED,2. M odel and serial number of the product under warranty, and3. Repair instructions and/or specific problems relative to the product.FOR NON-WARRANTY REPAIRS, consult OMEGA for current repair charges. Have the following information available BEFORE contacting OMEGA:1. Purchase Order number to cover the COST of the repair,2. Model and serial number of the product, and 3. Repair instructions and/or specific problems relative to the product.RETURN REQUESTS/INQUIRIESDirect all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RET URNING ANY PRODUCT (S) T O OMEGA, PURCHASER MUST OBT AIN AN AUT HORIZED RET URN (AR) NUMBER FROM OMEGA’S CUST OMER SERVICE DEPART MENT (IN ORDER T O AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return package and on any correspondence.The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit.Where Do I Find Everything I Need for Process Measurement and Control?OMEGA…Of Course!Shop online at TEMPERATUREM U Thermocouple, RTD & Thermistor Probes, Connectors, Panels & AssembliesM U Wire: Thermocouple, RTD & ThermistorM U Calibrators & Ice Point ReferencesM U Recorders, Controllers & Process MonitorsM U Infrared PyrometersPRESSURE, STRAIN AND FORCEM U Transducers & Strain GagesM U Load Cells & Pressure GagesM U Displacement TransducersM U Instrumentation & AccessoriesFLOW/LEVELM U Rotameters, Gas Mass Flowmeters & Flow ComputersM U Air Velocity IndicatorsM U Turbine/Paddlewheel SystemsM U Totalizers & Batch ControllerspH/CONDUCTIVITYM U pH Electrodes, Testers & AccessoriesM U Benchtop/Laboratory MetersM U Controllers, Calibrators, Simulators & PumpsM U Industrial pH & Conductivity EquipmentDATA ACQUISITIONM U Communications-Based Acquisition SystemsM U Data Logging SystemsM U Wireless Sensors, Transmitters, & ReceiversM U Signal ConditionersM U Data Acquisition SoftwareHEATERSM U Heating CableM U Cartridge & Strip HeatersM U Immersion & Band HeatersM U Flexible HeatersM U Laboratory HeatersENVIRONMENTALMONITORING AND CONTROLM U Metering & Control InstrumentationM U RefractometersM U Pumps & TubingM U Air, Soil & Water MonitorsM U Industrial Water & Wastewater TreatmentM U pH, Conductivity & Dissolved Oxygen InstrumentsMQS5570/1217。
magma中文手册
magma中⽂⼿册MAGMASOFT?4.0Manual Part one1.介紹(Introduction) ………………………………1.1MAGMASOFT? 可以提供你什麼？………………1.2如何成功的使⽤MAGMASOFT?………………1.3MAGMASOFT?的⽂件結構………………………1.4拼字跟⽤法………………………………………1.5疑問………………………………………………2.安裝(Installation)……………………………2.1 系統需求2.2 MAGMA安裝………………………………2.3 啟動MAGMASOFT? 執照………………2.3.1 擷取系統資訊………………………………2.3.2 從Email讀取系統和執照檔………………2.3.3 ⼿動輸⼊系統鑰匙………………………………2.3.4 ⼿動輸⼊執照鑰匙………………………………2.3.5 從檔案讀取系統鑰匙……………………………2.3.6 從檔案讀取執照鑰匙……………………………2.4 管理浮動執照………………………………2.4.1 顯⽰連結………………………………2.5 MAGMASOFT? 的專案………………………………2.6 MAGMASOFT? 的畫⾯………………………………2.7滑⿏鍵盤的⽤法………………………………3.專案管理(Project Administration)3.1開啟專案(Open project)………………………………3.2 產⽣新的專案(Create project)………………………3.3 產⽣新的版本(Create Version)…………………………3.4 刪除結果(Delete Result)…………………………3.5 刪除版本(Delete Version)……………………………3.6 刪除專案(Delete project)……………………………3.7專案資訊(Project info)………………………………4.前處理器(Preprocessor)4.1 開始幾何建構………………………………………4.2 管理幾何資料(Sheets)………………………………4.3 幾何資料庫(Geometry database)………………………4.4 輸⼊CAD資料(Importing CAD Data)…………………4.5 定義⾓度及精度(Definition of Angles & Accuracy)………4.6 選擇畫⾯(View options)………………………………4.7建構指令(Construction commands)……………………4.8操作指令(Manipulation commands)……………………4.9控制點(Control Point)………………………………4.10⽀援幾何功能(Support functions)………………………5.網格化(Mesh Generation)5.1 概論(Overview)………………………………5.1.1格⼦⼤⼩ / ‘wall thickness’………………………5.1.2格⼦再細化/ ‘accuracy’, ‘element size’……………5.1.3格⼦的修飾/ ‘smoothing’………………………5.1.4個⼦的外觀/ ‘aspect ratio’………………………5.2材料群的選⽤與網格化的改善………………………5.3產⽣網格(Generate mesh)……………………………5.4檢查網格(Check enmeshment)………………………5.4.1觀看網格(view mesh)…………………………5.4.2觀看網格品質(view mesh quality)………………6.模擬計算(Simulation)6.1 概論(Overview)………………………………6.1.1 充填(Mold filling)………………………………6.1.2 凝固(Solidification)…………………………6.1.3 充填和凝固………………………………6.1.4 批次⽣產(Batch production)……………………6.2 模擬參數定義(Defining simulation parameters)…………6.2.1 材料 / ‘Material definition’………………………6.2.2 熱傳導係數/ ‘Heat transfer definition’…………MAGMAshakeout選項…………………………6.2.36.2.4 充填 / ‘filling’………………………………6.2.5 注湯速率/ ‘pouring rate’………………………6.2.6 凝固 /‘solidification’……………………………6.2.7 批次⽣產/ ‘batch production’……………………6.3 模擬的開始與控制(Simulation control)…………………6.4 錯誤訊息(Error and Warning messages)…………………7. 選項與模組7.1模組………………………………7.2 選項………………………………1介紹(Introduction)鑄造就是將⾦屬液倒⼊模⽳中成形的⼀種⽣產技術,也是⼀種從設計到成品最快速的⽅法之⼀。
PMMA MF001物性
PMMA性质：非晶体聚合物，92%光线穿透率，热变性温度介于74°C~102°C间。
优点：1、高光学透明性；2、耐候性佳；3、刚性佳；4、易染色。
用途：灯罩、窗玻璃、标示牌、光学透镜、硬式隐形眼镜、汽车零件。
PMMA塑料的性能简介：聚甲基丙烯酸甲酯,PMMA又叫有机玻璃，压克力(亚加力)。
顾名思义，因为其良好的光学透明性而著名。
它不但具有很高的透光率（92％），而且机械强度高,重量轻,耐紫外线和户外老化优良的电性能等特点。
PMMA的不足之处是表面硬度不够、耐热性差、冲击强度不高，尤其对缺口冲击敏感等。
改性后的PMMA其性能变得更加优异。
PMMA MF001 物性表资料由长城塑胶提供T e L 1 3 6 8 6 6 5 8 5 1 7供应PMMA 韩国LG IF850高流动性。
适用于复杂的架子或面积大而薄的墙饰件。
供应PMMA 韩国LG IH830耐热级、机械强度及表面硬度最强。
适用于尾灯和其他汽车零件。
供应PMMA 韩国LG IH830C型颜色区分：IH830C透明色；IH830C-CP4006（红色）；IH830C-CP2001（黄色）供应PMMA 韩国LG HI-835MS 聚甲基丙烯酸甲酯供应PMMA 韩国LG HI855H 聚甲基丙烯酸甲酯供应PMMA 韩国LG HI533 聚甲基丙烯酸甲酯供应PMMA 日本住友化学HT55X 耐冲击性供应PMMA 日本住友化学HT50Y 注塑级供应PMMA 日本住友化学MH 耐热性供应PMMA 日本住友化学LG2 高流动性，良模压性供应PMMA 南通三菱丽阳MD001抗冲击供应PMMA 南通三菱丽阳MF001 通用级高流动性供应PMMA 南通三菱丽阳IRD-50抗冲击供应PMMA 南通三菱丽阳IRD-70 抗冲击供应PMMA 南通三菱丽阳IRH-50抗冲击供应PMMA 南通三菱丽阳IRH-70抗冲击供应PMMA 南通三菱丽阳VRL-40 抗冲击供应PMMA 南通三菱丽阳TF8 板材导光板适用于小型、薄型的导光板供应PMMA 南通三菱丽阳VH001通用级耐热级耐候性（耐气候性）供应PMMA 南通三菱丽阳VH5导光板板材适用于大型、厚型的导光板供应PMMA 台湾奇美CM-205 耐热级，耐热型射出级、能耐高温、热变形温度高达100°C、机械性强耐。
PMMA MF001
PMMA MF001 适用于大型或薄型模塑品资料由琨正塑胶提供客服热线 TeL 135,3866,8608PMMA/南通丽阳/MF001特性备注：具有出色的流动性，适用于大型或薄型模塑品用途：杂货，家电，照明重要参数：熔体流动速率:14 g/10min密度:1.19 g/cm3吸水率:0.3 %缺口冲击强度:1.2 拉伸强度:69 MPaPMMA/南通丽阳/TF8特性备注：适用于小型、薄型的导光板用途：笔记本电脑用导光板重要参数：熔体流动速率:10 g/10min密度:1.19 g/cm3吸水率:0.3 %缺口冲击强度:1.2 拉伸强度:59 MPaPMMA/南通丽阳/VH001特性备注：具有最好的耐热性，耐气候性用途：车辆，照明，光学产品重要参数：熔体流动速率:2 g/10min密度:1.19 g/cm3吸水率:0.3 %缺口冲击强度:1.3 拉伸强度:78 MPaPMMA/南通丽阳/VH5特性备注：适用于大型、厚型的导光板用途：台式电脑用导光板重要参数：熔体流动速率:5.5 g/10min密度:1.19 g/cm3吸水率:0.3 %缺口冲击强度:1.2 拉伸强度:62 MPaPMMA/南通丽阳/VRM40特性备注：具有出色的高抗冲击性和流动性用途：文具、手机面板、玩具重要参数：缺口冲击强度:7 拉伸强度:50 MPa热变形温度:90 ℃PMMA典型应用范围汽车工业（信号灯设备、仪表盘等），医药行业（储血容器等），工业应用（影碟、灯光散射器），电子产品的按键（特别是透明的）。
日用消费品（饮料杯、文具等）。
PMMA溶于有机溶剂，如苯酚，苯甲醚等，通过旋涂可以形成良好的薄膜，具有良好的介电性能，可以作为有机场效应管（OFET）亦称有机薄膜晶体管（OTFT）的介质层。
注塑模工艺条件干燥处理：PMMA具有吸湿性因此加工前的干燥处理是必须的。
建议干燥条件PMMA 为90℃、2~4小时。
熔化温度：240~270℃。
美国巴克莱尼公司产品目录说明书
121Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA10-1515.........1.5" x 1.5" Standard ..............................................1810-1515PKG..1.5" x 1.5" Standard 4 x 8' Pcs.............................1810-1530.........1.5" x 3" Standard .................................................2110-1530PKG..1.5" x 3" Standard 4 x 8' Pcs ................................2110-1543.........1.5" Quarter Round ...............................................2010-1545.........1.5" x 1.5" x 45......................................................2010-1560.........1.5" x 6" Standard .................................................2410-1575.........1.5" x .75"..............................................................2010-1591.........1.5" x 1.5" Mono Slot ............................................1910-1592.........1.5" x 1.5" Bi-Slot Corner......................................1910-1593.........1.5" x 1.5" Tri-Slot .................................................1910-1594.........1.5" x 1.5" Bi-Slot Mid Frame ...............................1910-3030.........3" x 3" Standard ....................................................2310-3030PKG..3" x 3" Standard 2 x 8' Pcs ...................................2310-3092.........1.5" x 3" Tri-Slot Corner ........................................2210-3093.........1.5" x 3" Quad Slot................................................2210-3094.........1.5" x 3" Bi-Slot Mid Frame ..................................2211-1515.........1.5" x 1.5" Heavy...................................................1811-1515PKG..1.5" x 1.5" Heavy 4 x 8' Pcs .................................1811-1530.........1.5" x 3" Heavy......................................................2111-1530PKG..1.5" x 3" Heavy 4 x 8' Pcs ....................................2111-3030.........3" x 3" Heavy .........................................................2312-001............Upper Door Track 40 - Plastic ..............................8312-002............Lower Door Track 40 - Plastic ..............................8312-006............Sliding Door Guide 1", Upper ...............................8312-007............Sliding Door Guide 1", Lower ...............................8312-010............Mesh Clamp Profile, Clr - Max 13.1ft ...................8212-011............Stiffener/ Handle Profile, Clr - Max 9.8ft ..............8212-012............Sliding Door Guide 40 - Upper, Clr - Max 9.8ft....8312-013............Sliding Door Guide 40 - Lower, Clr - Max 9.8ft....8312-018............Panel Extrusion 40, Clr - Max 19.7ft ....................8212-022............Rolling Door Guide Profile, Clr - Max 13.1 ft.......8612-032............32 x 18 Bi-Slot .......................................................2512-090............Cover/Gasket Strip 1", Clear ................................2912-090B .........Cover/Gasket Strip 1", Black ................................2912-090Y .........Cover/Gasket Strip 1", Yellow ..............................2912-095............Aluminium Cover Strip 1"......................................2912-095B .........Aluminium Cover Strip 1", Black ..........................2912-101............Cover/ Gasket Strip 40, Clr - 6.6ft........................2912-1010.........1" x 1" Standard ....................................................1612-1010PKG..1" x 1" Standard 6 x 8' Pcs ...................................1612-101B .........Cover/ Gasket Strip 40, Blk - 6.6ft .......................2912-101Y .........Cover/ Gasket Strip 40, Yellow - 6.6ft..................2912-102............Al Cover Strip 40, Clr - 6.6ft..................................2912-1020.........1" x 2" Standard ....................................................1612-1020PKG..1" x 2" Standard 4 x 8' Pcs ...................................1612-102B .........Al Cover Strip 40, Blk - 6.6 ft. Length ..................2912-1030.........1" x 3" Standard ....................................................1712-105............Clamp Bar Profile ..................................................2712-106............Panel Gasket .........................................................2812-107............Mesh Gasket .........................................................2812-108............Panel Gasket 10 Clear - Max 410 ft.....................2512-109............19" Rack Angle......................................................2612-110............Rack Angle, Blank .................................................2612-111B .........PVC Cover Strip 40, Blk - 6.6ft.............................2912-111BL .......PVC Cover Strip 40, Blue - 6.6ft ..........................2912-112............Safety Cover Strip 40/28, Yellow - Max 9.8ft.......2812-114............Anti-Skid Cover 40, Blk - Max 65.6ft....................2812-2020.........2" x 2" Standard ....................................................1712-400............UHMW Slide Bar 40 max 120"...........................11112-402............Slide Strip 1" max 120".......................................11112-410............Slide Strip 1.5" max 120"....................................11112-420............UHMW Slide Bar 40 x 10 max 120"...................11112-421............UHMW Guide Profile .............................................8613-012............Steel Tube, Plastic Coated for handles(max. 120 in.).....................................................5413-410............Slide Profile 40....................................................11013-430............Slide Profile 40 Side Flange . (110)13-440............Slide Profile 28....................................................11013-450............Slide Profile 28 Side Flange ...............................11013-800............Slide Profile 56....................................................11013-810............Slide Profile 80....................................................11018-1010.........1" x 1" End Cap .....................................................3118-1020.........1" x 2" End Cap .....................................................3118-1030.........1" x 3" End Cap .....................................................3118-1515.........1.5" x 1.5" End Cap...............................................3118-1530.........1.5" x 3" End Cap..................................................3118-1543.........1.5" Quarter Round End Cap................................3118-1545.........1.5" x 1.5" x 45? End Cap.....................................3118-1575.........1.5" x .75" End Cap...............................................3118-2020.........2" x 2" End Cap .....................................................3118-3030.........3" x 3" End Cap .....................................................3118-710............Access Hole Plug ..................................................3118-713............Access Hole Plug - Steel ......................................3118-807............32x18 End Cap......................................................2519-004............Drill & Counterbore for BHCS or SHCS .............11419-006............Drill & Countersink for FHCS ..............................11419-007............Saw Cut for Linear Shaft.....................................11419-009............Tap 5/16-18........................................................11419-026............Panel Packing for Secure Transport ..................11419-029............Panel - Chamfer Corner ......................................11419-030............Panel - Notch Corner ..........................................11419-104............Special Miter Cut .................................................11419-200............Special Invoice Required ....................................11419-201............Assembly Required .............................................11419-202............Assembly Form Follows......................................11419-203............Packaging in Kit Form.........................................11419-204............Kit Form Follows..................................................11419-205............Special Assembly Documents Enclosed............11419-206............Engineering..........................................................11419-207............On-Site Installation..............................................11419-208............Special Packing Slip Required ...........................11419-210............Special Machining ...............................................11419-211............Miter Connection Service....................................11419-300............Inspection/Acceptance/Approval ........................11419-501............Saw Cut up to 3"x1.5".........................................11419-502............Saw Cut up to 3"x3"............................................11419-503............Saw Cut 6"x1.5"...................................................11419-511............Drill .277" Access Hole - Except 6" side ............11419-512............Drill & Tap (10/32",1/4",5/16", 3/8")....................11419-514............Drill & Tap (1/2" or 5/8" up to 1.5" Deep)...........11419-515............Step Drill for Universal Fastener 1.5" or 1"........11419-516............Drill/ Tap 5/16x1.5" for 5/16"Foot .......................11419-517............Drill/ Tap 3/8"x 2" for 3/8" Foot...........................11419-520............Step Bore for Pneum. Univ. Fastener(3/4" x 1/4")......................................................11419-525............Drill .277" Access Hole thru 6" side ...................11419-527............Panel - Thru Hole up to 3/8"l Profile Square 3"x1.5"l Profile Square 3"x3"l Profile Square 6"x1.5"..................................11419-603............Drill/ Tap/ Mill for Roller PA ................................11419-605............45° Miter Cut, up to 3x3" profile .........................11419-606............45° Miter Cut, 6"x1.5" profile ..............................11420-059............T-Slot Profile 1.5"..................................................3620-062............Heavy T-Slot Bar - 1.5".........................................3620-082............Economy T-Slot Nut, 1.5" - 5/16-18.....................3520-082SS.......Economy T-Slot Nut, 1.5" - 5/16-18,Stainless Steel ...................................................3520-083............Economy T-Slot Nut, 1.5" - 1/4-20.......................3520-088............Economy T-Slot Nut, #10-32...............................3520-093SS.......Economy T-Slot Nut 28, 1/4-20 Stainless Steel .......20-1010.........Cast Gusset 1"......................................................4520-1010C.......Cap for Cast Gusset 1".........................................4520-102z4........Gusset Profile ........................................................2720-182............Economy Offset T-Slot Nut, 1.5" - 5/16-18. (35)122Parker Hannifin CorporationIndustrial Profile Systems Business Unit Wadsworth, Ohio USA20-193............Economy Offset T-Slot Nut 1.5" - 1/4-20.............3520-200............Retainer for Wire mesh 1"Single ..........................8120-201............Retainer for Wire mesh 1" Double........................8120-202............Retainer for Wire mesh 1.5" Single ......................8120-203............Retainer for Wire mesh 1.5" Double.....................8120-300............Joining Plate, 1.5" x 3"..........................................4820-301............Joining Plate, 1.5" x 6"..........................................4820-302............Joining Plate, 3" x 3".............................................4820-303............Joining Plate, 3" x 6".............................................4820-304............Joining Plate, Corner 4.5" x 4.5"..........................4920-305............Joining Plate, T , 4.5" x 4.5".................................4920-306............Joining Plate, Corner 6" x 6"................................4920-307............Joining Plate, T , 6" x 6".......................................4920-310............Joining Plate, 1" x 2".............................................5020-311............Joining Plate, 1" x 4".............................................5020-312............Joining Plate, 2" x 2".............................................5020-313............Joining Plate, 2" x 4".............................................5020-314............Joining Plate, Corner 3" x 3".................................5120-315............Joining Plate, T , 3" x 3".......................................5120-330............Connection Element, 90 1.5" x 1.5" x 1.5"...........4220-335............Connection Element, 90 1" x 1" x 1"....................4320-336............Connection Element, 90 1" x 1" x 2"....................4320-337............Connection Element, 90 1.5" x 1.5" x 3"..............4220-338............Connection Element, 90 1.5" x 3" x 3".................4220-4040.........1 x 1 Single Gusset (die cast)..............................4520-440............Gusset Bracket, 3" x 3" x 1.5"..............................4420-441............Gusset Bracket, 3" x 3" x 3".................................4420-442............Gusset Bracket, 3" x 3" x 1".................................4420-500............Corner Element 1, 1.5"..........................................4620-501............Corner Element 1, 3".............................................4620-502............Corner Element 2, 1.5"..........................................4620-503............Corner Element 2, 3".............................................4620-504............Corner Element 3, 1.5"..........................................4620-505............Corner Element 3, 3".............................................4620-506............Machined Gusset 1" x 1"......................................4720-507............Machined Gusset 1" x 2"......................................4720-508............Machined Gusset 1.5" x 1.5"................................4720-509............Machined Gusset 1.5" x 3"...................................4720-8040.........2 x 2 Single Gusset (die cast)..............................4521-020............Rubber Insert 80....................................................9221-021............Clamping Shoe 80.................................................9221-032............Floor Fastening Set...............................................9221-057z4........L-Bracket Profile....................................................2721-060............L Base Floor Anchor 1.5"......................................9321-061............L Base Floor Anchor 1".........................................9321-073............UHMW Guide Insert Set - 1/4-20..........................8621-075............Roller Insert Set.....................................................8621-1020-04....Base Plate, 1" x 2", 1/4-20..................................10121-1020-05....Base Plate, 1" x 2", 5/16-18................................10121-1030-04....Base Plate, 1" x 3", 1/4-20..................................10121-1030-05....Base Plate, 1" x 3", 5/16-18................................10121-1530-06....Base Plate, 1.5" x 3", 3/8-16..............................10121-1530-08....Base Plate, 1.5" x 3", 1/2-13..............................10121-1530-10....Base Plate, 1.5" x 3", 5/8-11..............................10121-2020-05....Base Plate, 2" x 2", 5/16-18................................10121-2020-06....Base Plate, 2" x 2", 3/8-16..................................10121-2020-08....Base Plate, 2" x 2", 1/2-13..................................10121-250............Flange Foot 1.5" x 1.5".........................................9521-252............Flange Foot 1" x 1"................................................9521-255............Flange Foot 1.5" x 3.0".........................................9521-256............Flange Foot 3.0" x 3.0".........................................9521-300............Caster Swivel 2" - Hollow King Pin.......................9621-301............Caster Swivel 2", Locking - Hollow King Pin........9621-302............Caster Rigid 3" - Top Plate ...................................9721-303............Caster Swivel 3" - Top Plate.................................9721-3030-06....Base Plate, 3" x 3", 3/8-16..................................10121-3030-08....Base Plate, 3" x 3", 1/2-13..................................10121-3030-10....Base Plate, 3" x 3", 5/8-11. (101)21-304............Caster Swivel 3", Locking - Top Plate..................9721-305............Caster Swivel 3" - 7/16 Grip Ring.........................9621-306............Caster Swivel 3", Locking - 7/16 Grip Ring..........9621-309............Caster Swivel 3" - Hollow King Pin.......................9621-310............Caster Swivel 3", Locking - Hollow King Pin........9621-311............Caster Rigid 5" - Top Plate ...................................9721-312............Caster Swivel 5" - Top Plate.................................9721-313............Caster Swivel 5", Locking - Top Plate..................9721-316............Caster Swivel 5" - Plate 550lbs ..........................10021-317............Caster Swivel 5", Locking - Plate 550lbs ...........10021-318............Caster Swivel 5" - Plate 900lbs ..........................10021-319............Caster Swivel 5", Locking - Plate 900lbs ...........10021-320............Standard Duty 1-5/8" - 7/16 Grip Ring .................9621-323............Leveling Caster 1"- Threaded Stud M12..............9921-324............Leveling Caster 1" - Plate Mount.........................9921-325............Floor Lock - Plate Mount.....................................10021-327............Leveling Caster 1.5"- Threaded Stud M12...........9921-328............Leveling Caster 1.5"- Plate Mount.......................9921-330............Socket for 1.5" x 3" Heavy....................................9621-331............Socket for 1.5" x 3" Standard ...............................9621-332............Corner Bracket for Standard Duty Casters ..........9621-333............Straight Bracket for Standard Duty Casters ........9621-336............Caster Swivel 3" - 1/2" Stem ................................9721-337............Caster Swivel 3" - Locking - 1/2" Stem ................9721-338............Caster Swivel 5" - 1/2" Stem ................................9721-339............Caster Swivel 5"- Locking - 1/2" Stem .................9721-340............Furniture 2" - 5/16 Grip Ring.................................9821-341............Furniture 2" - 5/16 Grip Ring-Locking ..................9821-342............Institutional Twin Wheel ........................................9821-343............Institutional Twin Wheel Locking ..........................9821-344............Dual Wheel 3" - 1/2" Stem ....................................9821-401............Knuckle Foot 1.5", 5/16-18 x 2"............................9021-402............Knuckle Foot 1.5", 5/16-18 x 3"............................9021-403............Knuckle Foot 1.5", 3/8-16 x 3"..............................9021-404............Knuckle Foot 3", 1/2-13 x 4".................................9021-405............Knuckle Foot 3", 1/2-13 x 6".................................9021-406............Knuckle Foot 3", 5/8-11 x 4".................................9021-407............Knuckle Foot 3", 5/8-11 x 6".................................9021-409............Corner Mounting Plate ..........................................9221-410............Knuckle Foot 1" Delrin, 1/4-20 x 2"......................8921-411............Knuckle Foot 1" Delrin, 3/8-16 x 3"......................8921-412............Knuckle Foot 1" Steel, 1/4-20 X 2".......................8921-413............Knuckle Foot 1" Steel, 3/8-16 X 3".......................8921-414............Knuckle Foot 1" Steel, 1/2-13 x 3".......................8921-415............L-Base Leveling Foot 1.5".....................................9321-416............L-Base Leveling Foot 1"........................................9321-420............Leveling Foot 3, Bolt Down, 1/2-13......................9121-421............Leveling Foot 3, Bolt Down, 5/8-11......................9121-422............Anti-Vibration Leveler 1/2-13, Light......................9121-423............Anti-Vibration Leveler 1/2-13, Medium.................9121-424............Anti-Vibration Leveler 1/2-13, Heavy ...................9121-440............Floor Mounting Bracket 1.5".................................9421-441............Floor Mounting Bracket 3"....................................9421-442............Floor Mounting Bracket 1"....................................9421-443............Floor Mounting Bracket 2"....................................9421-500............Adapter Plate 1.5".................................................9921-501............Adapter Plate 1.0".................................................9921-502............Adapter Plate 1.5".................................................9921-504............Base Plate for heavy Casters.............................10022-111............Economy Mesh Clamp 1.5"..................................8122-115............Multiblock 1.5" - 1/4-20.........................................8022-116............Multiblock 1" - 1/4-20............................................8022-153............Corner Bracket 1.5"...............................................4122-154............Connector Cap 1.5" Radius ..................................4122-155............Connector Cap 45 Degree ....................................4122-202............Cable Tie Holder....................................................8722-204............T-Clip 5/32-1/4 w/Fast Kit .....................................8722-206............T-Clip 1/4-5/16 w/Fast Kit . (87)123Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA22-209z1........T-Clip 5/16-3/8 w/Fast Kit .....................................8722-211z1........T-Clip 3/8-1/2 w/Fast Kit .......................................8722-213z1........T-Clip 1/2-5/8 w/Fast Kit .......................................8722-216z1........T-Clip 5/8-3/4 w/Fast Kit .......................................8722-219z1........T-Clip 3/4-7/8 w/Fast Kit .......................................8722-223z1........T-Clip 7/8-1 w/Fast Kit ..........................................8722-230............Cable Hose Holder w/ English Fast Kit ................8723-030............Light Duty Aluminium Handle ...............................5323-031............Handle PA 132......................................................5423-032Z1.......Handle PA 179......................................................5423-033............Handle PA 93.5.....................................................5423-038............L-Handle Locking...................................................5523-038z1........Backing Plate.........................................................5723-039............L-Handle Non-locking............................................5523-046............Magnetic Catch......................................................6023-051............Strike Plate for Magnetic Catch............................6023-058............Mini-Key Safety Switch - Straight Key .................7023-059............Mini-Key Safety Switch - Angle Key.....................7023-060............Safety Switch 1 (1 NC + 1 NO).............................7223-061............Safety Switch 1 (2 NC)..........................................7223-062............Safety Switch 2 (1 NC + 1 NO).............................7323-063............Safety Switch 2 (2 NC + 2 NO).............................7323-064............Safety Switch 3 (2 NC) - To Lock.........................7423-066............Safety Switch 3 (2 NC) - To Unlock .....................7423-070............Open Angled Handle .............................................5323-071............Closed Angled Handle ..........................................5323-072............Tube Handle Ends.................................................5423-073............Tube Handle Center Supports ..............................5423-102............Mini-Key Mounting Bracket...................................7023-104............Safety Switch Mounting Bracket 1.......................7223-108............Mini Key Mounting Bracket - Top .........................7123-109............Mini Key Mounting Bracket - Sliding ....................7123-110............Safety Switch Mounting Bracket 3.......................7423-119............Mounting Bracket for Magnetic Catch..................6023-120............Ball Catch Bracket Style 1....................................5823-121............Ball Catch ..............................................................5823-122............Magnetic Catch Bracket........................................6023-124............Door Stop 1"..........................................................6323-125............Door Stop 1.5" - Straight.......................................6323-126............Door Stop 1.5" - Angle ..........................................6323-127............Ball Catch Bracket Style 2....................................5823-128............Ball Plunger, 3/8" Dia x .786"...............................5923-129............Ball Plunger, 1/2" x 1.10"......................................5923-130............Rachet Lock (for panel sliding doors)..................6323-133............Quarter Turn Latch T-Handle Non-Locking..........5523-134............Quarter Turn Latch Wing Knob Locking...............5523-135............Quarter Turn Latch - Square Insert ......................5523-137............Ball Catch Bracket 1"............................................5923-140z1........Spare Key for 23-134/23-144...............................5723-140z2........Square Key for 23-135/23-145.............................5723-140z4........Cam 45-2 Offset ....................................................5723-140z5........Cam 35-10 Offset ..................................................5723-140z7........Keeper Bracket......................................................5723-140z8........Cam 45-8...............................................................5723-142z1........Hooked Cam..........................................................5723-143............Quarter Turn Latch T-Handle Non-Locking Panel 5623-144............Quarter Turn Latch Wing Knob Locking Panel ....5623-145............Quarter Turn Latch - Square Insert Panel ...........5623-155............Slam Latch - Keyed...............................................6223-156............Slam Latch - Non Locking.....................................6223-158............Velcro Plate ...........................................................6323-159............Internal Handle for Quarter Turn Handles............5623-160............Deadbolt Latch ......................................................6223-210............Grabber Door Catch ..............................................6123-211............Grabber Door Catch w/Micro-Switch..................6123-212............Grabber Door Catch Bracket 90 degree ..............6123-213............Grabber Door Catch Bracket Flat.........................6123-220............Adjustable Hinge 1................................................6823-222............Adjustable Hinge 2................................................6823-224............Positioning Hinge 85°............................................6823-226............Positioning Hinge 120°..........................................6823-228............Positioning Hinge 155°..........................................6823-250............Hinge 1" - Steel .....................................................6623-250L .........Hinge 1" - Steel Left ..............................................6623-250R.........Hinge 1" - Steel Right............................................6623-251............Hinge 1"/1.5" - Steel..............................................6623-251L .........Hinge 1"/1.5" - Steel Left ......................................6623-251R.........Hinge 1"/1.5" - Steel Right ....................................6623-252............Hinge 1.5" - Steel ..................................................6623-252L .........Hinge 1.5" - Steel Left ...........................................6623-252R.........Hinge 1.5" - Steel Right ........................................6623-260............Pivot Joint 1", Blk ..................................................6923-261............Pivot Joint 1", Blk - Locking..................................6923-262............Pivot Joint 1.5", Blk ...............................................6923-263............Pivot Joint 1.5", Blk - Locking...............................6923-550............Plastic Hinge 1".....................................................6723-550L .........Plastic Hinge 1" - Left ...........................................6723-550R.........Plastic Hinge 1" - Right .........................................6723-551............Plastic Hinge 1.5"..................................................6723-551L .........Plastic Hinge 1.5" - Left ........................................6723-551R.........Plastic Hinge 1.5" - Right......................................6723-552............Plastic Hinge 1/1.5"...............................................6723-552L .........Plastic Hinge 1/1.5" - Left .....................................6723-552R.........Plastic Hinge 1/1.5" - Right...................................6723-620............Aluminum Hinge 1.5" - Right Long .......................6423-621............Aluminum Hinge 1.5" - Left Long..........................6423-622............Aluminum Hinge 1.5" - Right Short ......................6423-623............Aluminum Hinge 1.5" - Left Short .........................6423-624............Aluminum Hinge 1.5" - Receiver ..........................6423-625............Aluminum Hinge 1.5" - Double Pin .......................6423-626............Aluminum Lift off Hinge 1.5" - Heavy Duty ..........6523-626L .........Aluminum Lift off Hinge 1.5" - Left .......................6523-626R.........Aluminum Lift off Hinge 1.5" - Right .....................6523-630............Aluminum Hinge 1" - Right Long ..........................6423-631............Aluminum Hinge 1" - Left Long.............................6423-632............Aluminum Hinge 1" - Right Short..........................6423-633............Aluminum Hinge 1" - Left Short ............................6423-634............Aluminum Hinge 1" - Receiver..............................6423-635............Aluminum Hinge 1" - Double Pin ..........................6423-636............Aluminum Lift off Hinge 1" - Heavy Duty..............6523-636L .........Aluminum Lift off Hinge 1" - Left...........................6523-636R.........Aluminum Lift off Hinge 1" - Right ........................6523-640............Aluminum Lift off Hinge 1"/1.5" - Heavy Duty......6523-640L .........Aluminum Lift off Hinge 1"/1.5" - Left ...................6523-640R.........Aluminum Lift off Hinge 1"/1.5" - pression Springfor Economy T-Nuts, 1/pression Springfor Economy T-Nuts, 5/16-18...........................3525-001............T-Slot Nut 40 Steel 1/4-20....................................3425-002............T-Slot Nut, 1.5" - 5/16-18......................................3425-002SS.......T-Slot Nut, 1.5" - 5/16-18, Stainless Steel...........3425-003............Standard Fastener 5/16-18...................................3225-003SS.......Standard Fastener 5/16-18, Stainless Steel........3225-004............Universal Fastener 5/16-18..................................3325-005............Drop In T-Nut 10-32...................................................25-006............Drop in T-Nut 1/4-20", Rubber post...........................25-007............Drop in T-Nut 5/16-18", Rubber post.........................25-008............Drop-in T-Nut, 1/4-20, 28/56......................................25-009............T-Slot Nut, 1.5" *- #10-32......................................3425-014............Single Ear Standard Fastener 1.5" - 5/16-18.......3225-015............Profile to Wall Universal Fastener 5/16-18..........3325-016............Butt Fastener Assembly 5/16-18..........................3325-017............Butt Fastener Assembly 1/4-20............................3325-022............Standard Fastener, 1/4-20....................................3225-022z1........Standard Fastener, 1/4-20 - Clip .. (32)。
MGate 5119系列产品说明书
P/N: 1802051190010 *1802051190010*MGate 5119 Series Quick Installation GuideVersion 1.0, December 2021Technical Support Contact Information/support2021 Moxa Inc. All rights reserved.OverviewThe MGate 5119 Series is an Ethernet gateway designed for the power industry to integrate Modbus, DNP3, IEC 60870-5-101/104 devices to an IEC 61850 MMS network.Package ChecklistBefore installing the MGate 5119, verify that the package contains the following items:• 1 MGate 5119 gateway• 1 serial cable: CBL-RJ45F9-150•Quick installation guide (printed)•Warranty cardPlease notify your sales representative if any of the above items is missing or damaged.Optional Accessories (can be purchased separately)•CBL-F9M9-150: DB9-female-to-DB9-male serial cable, 150 cm •CBL-F9M9-20: DB9-female-to-DB9-male serial cable, 20 cm •CBL-RJ45F9-150: RJ45-to-DB9-female serial cable, 150 cm •CBL-RJ45SF9-150: RJ45-to-DB9-female serial shielded cable, 150 cm•Mini DB9F-to-TB DB9: Female-to-terminal-block connector •WK-36-02: Wall-mounting kit, 2 plates with 6 screws•CBL-PJTB-10: Non-locking barrel plug to bare-wire cable Hardware IntroductionLED IndicatorsLED Color DescriptionReady Off Power is off or a fault condition existsGreen Steady: Power is on, and the MGate is functioningnormallyRed Steady: Power is on, and the MGate is booting upBlinking slowly: Indicates an IP conflict, or theDHCP or BOOTP server is not responding properlyFlashing quickly: the microSD card failedMB/101/ 104/DNP3 Off No communication with a Modbus/101/104/DNP3 deviceGreen Normal Modbus/101/104/DNP3 communication in progressRed When the MGate 5119 acts as a Modbus master:1.Received an exception code from the slavedevice2.Received a framing error (parity error,checksum error)3.Timeout (the master sent a request but noresponse was received)When the MGate 5119 acts as an IEC 60870-5-101/104/ DNP3 master:LEDColor Description1. Received an outstation exception (formaterror, checksum error, invalid data, outstation responds are not supported)2. Timeout (the master sent a command, but noresponse was received)850Off No communication with the IEC 61850 system Green Normal IEC 61850 communication in progress Red When the MGate 5119 acts as an IEC 61850server:1. Received an abnormal package (wrongformat, unsupported function code)2. Failed to establish an IEC 61850 connection3. Disconnected the IEC 61850 connectionDimensionsUnit: mm (inch)Reset ButtonRestore the MGate to factory default settings by using a pointed object (such as a straightened paper clip) to hold the reset button down until the Ready LED stops blinking (approximately five seconds).Pull-high, Pull-low, and Terminator for RS-485Beneath the MGate 5119’s top cover, you will find DIP switches to adjust each serial port’s pull-high resistor, pull-low resistor, and terminator.SW1 2 3 Pull-high resistor Pull-low resistor Terminator ON 1 k Ω 1 k Ω 120 Ω OFF 150 k Ω*150 k Ω*–**DefaultHardware Installation Procedure1.Connect the MGate 5119's terminal block to the power supply,which could provide 12 to 48 VDC.e a serial or Ethernet cable to connect the MGate to the ModbusRTU/ASCII/TCP, DNP3 Serial/TCP, IEC60870-5-101/104 device. e an Ethernet cable to connect the MGate to the IEC 61850 MMSsystem.4.The MGate 5119 is designed to be attached to a DIN rail ormounted on a wall. For DIN-rail mounting, push down the spring and properly attach it to the DIN rail until it “snaps” into place. For wall mounting, install the wall-mount kit (optional) first and then screw the device onto the wall. An M3 screw is suggested, and the minimum length of the screw should be 10 mm.The following figure illustrates the two suggested mounting options:The following figure illustrates how to attach screws to the mounting kits:DIN Rail:Wall-mount:NOTE The equipment is intended to be supplied by the external power source (UL listed/ IEC 60950-1/ IEC 62368-1), which outputcomplies with ES1/SELV, PS2/LPS, output rating is 12 to 48VDC, 0.455 A min., an ambient temperature 75°C minimum.NOTE Before connecting the Equipment to DC power inputs, make sure DC power source voltage is stable•The wiring of input terminal block shall be installed by skilled person.•Wire type: Cu•Only use 28-18 AWG wire size, torque value 0.5 N-m.•One individual conductor in a clamping point.NOTE If you are using a Class I adapter, the power cord should beconnected to an outlet with an earthing connection Software Installation InformationYou can download the User's Manual and Device Search Utility (DSU) from Moxa's website: . Please refer to the User’s Manual for additional details on using the DSU.The MGate 5119 also supports login via a web browser.Default IP address: 192.168.127.254Default account: adminDefault password: moxaPin AssignmentsSerial Port (Male DB9) PinRS-232RS-422/ RS-485 (4W)RS-485 (2W) 1 DCD TxD-(A) – 2 RXD TxD+(B) –3 TXD RxD+(B)Data+(B) 4 DTR RxD-(A) Data-(A) 5* GND GND GND 6 DSR – – 7 RTS – – 8 CTS – – 9 – ––*Signal groundEthernet Port (RJ45) Pin Signal 1 Tx+ 2 Tx- 3 Rx+ 6Rx-Power Input and Relay Output PinoutsV2+V2-V1+V1-ShieldedGroundDC Power Input 2 DCPowerInput 2 N.O.CommonN.C.DCPower Input 1 DC Power Input 1SpecificationsPower Requirements Power Input 12 to 48 VDC Input Current 455 mA max. Operating Temperature -40 to 75°C (-40 to 167°F) Ambient Relative Humidity 5 to 95% (non-condensing) Dimensions 36 x 120 x 150 mm (1.42 x 4.72 x 5.91 in) Reliability Alert Tools Built-in buzzer and RTC MTBF 1,180,203 hrs.Moxa Inc.No. 1111, Heping Rd., Bade Dist., Taoyuan City 334004, Taiwan。
OMEGA FMA-700A 和 FMA-800A 系列流量计与控制器说明书
Current Consumption: FMA-800A: <45 mA DC FMA-700A: <250 mA DC
Dimensions: mm (in); Weight: kg (lb)
Model No.
FMA-78C50 208 15 m (50') interconnect cable with connectors
FPW-15
75 15 Vdc power supply**
Note: All flow ranges are specified for nitrogen or air. When used for other gases, a correlation factor is used to determine flow rate.
Power: 117 Vac ±10%, 50 to 60 Hz, 50 Watts Dimensions: 215.9 W x 123.8 H x 247.7 mm D (81⁄2 x 47⁄8 x 93⁄4") Display: 0 to 102.4%
Rate Indicators/Electronics Boxes
HIGH FLOW-RATE GAS MASS CONTROLLERS AND METERS For Clean Gases
FMA-700A/800A Series Starts at
$982
FMA-775A, $2998.
Optional†
ߜ ±1% Accuracy (Up to 500 SLM), ±0.2% Repeatability
magnetom mica 参数
magnetom mica 参数
Magnetom Mica是一种先进的医疗设备，能够为患者提供精确而高质量的成像结果，以帮助医生做出准确诊断和治疗计划。
它采用了最新的磁共振成像(MRI)技术，具有出色的图像质量和卓越的性能。
Magnetom Mica的设计非常紧凑，占地面积小，适合在有限空间内使用。
它的磁体系统采用了先进的超导技术，能够产生高强度的磁场，以获得更清晰的图像。
同时，它的扫描速度也非常快，有效减少了患者的等待时间。
Magnetom Mica还具有智能化的功能，能够根据患者的具体情况进行个性化的扫描设置。
它可以根据不同的病灶类型和部位，自动调整扫描参数，以获得最佳的成像效果。
这不仅简化了医生的操作流程，还提高了诊断的准确性。
除了在成像质量和性能方面的优势，Magnetom Mica还注重患者的舒适度和安全性。
它采用了先进的减噪技术，降低了扫描过程中的噪音，让患者感受更加舒适。
同时，它还具有自动调节扫描参数的功能，能够减少对患者的辐射剂量，保护他们的健康。
总的来说，Magnetom Mica是一台功能强大的磁共振成像设备，具有出色的图像质量、卓越的性能和智能化的功能。
它为医生提供了可靠的诊断工具，为患者提供了更好的诊疗体验。
相信随着技术的不断进步，Magnetom Mica将在医疗领域发挥越来越重要的作用，
为人类的健康事业做出更大的贡献。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
X Ka Band, Connectorised Tripler: 8 – 10 GHz 24 – 30 GHz
V4
MAAMML0019
Features
• High Reliability
• Weight and space saving design • Field Replaceable K Connectors • Built-in Band Pass Filter • Built-in output amplifier
• Built-in power supply protection •
Space Qualified version available
Description
The MAAMML0019 is a high reliability X → Ka band tripler. This weight and space saving design has been realised by utilising the latest advances in housing materials. The unit consists of a tripler followed by a Ka band amplifier and band pass filter (BPF.) The amplifier restores output signal strength. The BPF reduces out of band products.
Additionally, built-in circuitry ensures that power supply sequencing can be any order, for both power-up and power-down.
Alternative frequency ranges, gain, output powers and supply rail configurations are available. The MAAMML0019 is also available as a space qualified version. Please contact the factory for details.
Mechanical
This device is supplied with field replaceable ‘K’ connectors. It is hermetically sealed, with a gold-plated finish to MIL-G-45204.
Functional Block Diagram
DC Supply
RF Input
RF Output
X3
X Ka Band, Connectorised Tripler: 8 – 10 GHz 24 – 30 GHz
V4
MAAMML0019
Specification at +25 °C
(Applies over the frequency range @ +25 °C, output and input load impedance of 50 ohms. Unless otherwise stated limits & conditions are indicated values.)
Parameter Value Units Input Frequency 8-10 GHz Operating Temperature T OP
+0 ∼ +50 °C Input power range +13 ∼ +18
dBm Conversion gain (nominal)
+3 dB Passband flatness
6 dB pk-pk Spurious -65 dBc Harmonics -20 dBc Input VSWR 2.5:1 Ratio Output VSWR
2:1
Ratio
DC Supply Positive Rail
Supply Voltage +7 V Current consumption
350
mA Supply Voltage -6.5 V Current consumption
10
mA DC Supply Negative Rail
Output Frequency 24-30 GHz。