0916272003;中文规格书,Datasheet资料
692121130100;中文规格书,Datasheet资料
2
3
4
5
TECHNICAL CHARACTERISTICS MATERIAL INSULATOR: LCP FLAMABILITY RATING: UL94-V0 COLOR: BLUE CONTACT MATERIAL: PHOSPHORE BRONZE CONTACT TYPE: STAMPED CONTACT PLATING: UNDERPLATE 1.27 to 2.54 µm Ni CONTACT AREA 0.76 µm Gold SOLDER TAIL AREA 2.54 to 5.08 µm Matt Tin SHIELDING: BRASS MATT TIN PLATED
UNIT: MM SHEET: 1/3 DRAW: JOE
DESCRIPTION: USB 3.0 REVERSE HORIZONTAL TYPE A WITH OFFSET 0.14 MM WERI PART NO: 692 121 130 100
SIZE
A4
D
/
1
CUT OUT PCB
A
PCB LAYOUT * - COMPONENT VIEW
ENVIRONMENTAL OPERATING TEMPERATURE: -20 up to +85°C COMPLIANCE: RoHS & LEAD FREE AS PER DIRECTIVE 2002/95/EC HALOGEN FREE COMPLIANT AS PER IEC 61249-2-21 ELECTRICAL CURRENT RATING: - PIN 1 & PIN 4 (Vbus & corresponding ground PIN) 1.8A Max - OTHER PINS 0.25 A Max WORKING VOLTAGE: 30Vac DIELECTRIC WITHSTANDING VOLTAGE: 100Vac/min INSULATION RESISTANCE: > 100MΩ CONTACT RESISTANCE: - PIN 1 & PIN 4: 30mΩ Max - OTHER PINS: 50mΩ Max IMPEDANCE: 90Ω +/- 15Ω @ 50ps RISE TIME (20~80%) STANDARD CERTIFIED: E323964 / MODEL NUMBER 692121130100 MECHANICAL INSERTION FORCE: 35.0N Max EXTRACTION FORCE: 10.0N min QUALITY CLASS: 5000 MATING CYCLES SOLDERING REFLOW PROCESS ONLY AS PER JEDEC J-STD-020D PACKAGING TAPE & REEL
0737691300;中文规格书,Datasheet资料
This document was generated on 08/09/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:73769-1300Status:ActiveOverview:HDM®Description:2.00mm Pitch HDM® Board-to-Board Stacking Header, High Rise Vertical, Press-Fit,Open End Option, 144 CircuitsDocuments:3D ModelProduct Specification PS-73780-999 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR19980ULE29179GeneralProduct Family Backplane Connectors Series73769ApplicationBackplane, Mezzanine Component Type PCB Header OverviewHDM®Product Name HDM®Style N/AUPC800754003254PhysicalCircuits (Loaded)144Circuits (maximum)144Color - ResinBlack Durability (mating cycles max)200First Mate / Last Break No Flammability94V-0Guide to Mating Part No Keying to Mating Part NoneMaterial - MetalPhosphor Bronze Material - Plating MatingGold Material - Plating Termination Tin-LeadMaterial - Resin High Temperature Thermoplastic Net Weight18.381/g Number of Columns 24Number of Pairs Open Pin Field Number of Rows 6Orientation Vertical PC Tail Length 3.50mm PCB Locator No PCB RetentionNone PCB Thickness - Recommended 1.40mm Packaging TypeTube Pitch - Mating Interface 2.00mm Plating min - Mating0.762µm Plating min - Termination 0.381µm Polarized to PCB No StackableYes Surface Mount Compatible (SMC)YesTemperature Range - Operating -55°C to +105°CTermination Interface: StyleThrough Hole - Compliant PinSeriesimage - Reference onlyEU RoHSChina RoHSRoHS Compliant by Exemption REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 73769SeriesMates With73632 HDM PLUS® Board-to-Board Daughtercard Receptacle. 73780 HDM®Board-to-Board Daughtercard Receptacle Application Tooling | FAQTooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.GlobalDescription Product #Backplane Insertion Head for 144 Circuits0622005703Flat Rock Tooling for Pneumatic Press0622013700ElectricalCurrent - Maximum per Contact1AData Rate 1.0 GbpsReal Signals (per 25mm)72Voltage - Maximum100V ACMaterial InfoReference - Drawing NumbersProduct Specification PS-73780-999Sales Drawing SD-73769-001HDM and High Density Metric are trademarks of Amphenol CorporationThis document was generated on 08/09/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0737691300。
0872631023;中文规格书,Datasheet资料
This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:87263-1023Status:ActiveOverview:Milli-Grid™ Connector SystemDescription:2.00mm Pitch Milli-Grid™ Receptacle, Surface Mount, Bottom Entry, 0.38µm Gold (Au)Selective, 10 Circuits, without Pick-and-Place Cap, Tube, Lead-FreeDocuments:3D ModelRoHS Certificate of Compliance (PDF)Drawing (PDF)Product Literature (PDF)Agency CertificationCSA LR19980ULE29179GeneralProduct Family PCB Receptacles Series87263Application Board-to-Board, SignalOverviewMilli-Grid™ Connector System Product Literature Order No 987650-1991Product Name Milli-Grid™UPC822348478842PhysicalCircuits (Loaded)10Circuits (maximum)10Color - ResinBlack Durability (mating cycles max)25Flammability94V-0Glow-Wire Compliant No Lock to Mating PartNone Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin High Temperature Thermoplastic Net Weight0.192/g Number of Rows 2Orientation Bottom Entry PCB Locator Yes PCB Retention None Packaging TypeTube Pitch - Mating Interface2.00mm Pitch - Termination Interface 2.00mm Plating min - Mating 0.381µm Polarized to Mating Part No Polarized to PCBYesTemperature Range - Operating -55°C to +105°C Termination Interface: StyleSurface Mount ElectricalCurrent - Maximum per Contact 1A Voltage - Maximum125VSolder Process DataDuration at Max. Process Temperature (seconds)14Lead-free Process CapabilityReflow Capable (SMT only)Max. Cycles at Max. Process Temperature 1Process Temperature max. C265Seriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Not Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 87263SeriesMates With87759 Vertical, Surface Mount, Stackable PCB Headers, 87760 Right Angle, Through Hole, Stackable PCB Headers, 87758Vertical, Through Hole, Stackable PCB HeadersMaterial InfoReference - Drawing NumbersSales Drawing SD-87263-**2*This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0872631023。
09160;09161;09162;中文规格书,Datasheet资料
0416710030;中文规格书,Datasheet资料
This document was generated on 08/16/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:41671-0030Status:ActiveOverview:KK® Interconnection SystemDescription:3.96mm Pitch KK® Header, Breakaway, Vertical, Square Pin, with Friction Lock, 8Circuits, 0.76µm Gold (Au) Selective PlatingDocuments:3D ModelProduct Specification PS-08-50 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR19980ULE29179GeneralProduct Family PCB Headers Series41671ApplicationPower, Wire-to-Board Application Tooling Part Link 011200901OverviewKK® Interconnection System Product Name KK®UPC756054573716PhysicalBreakawayYes Circuits (Loaded)8Circuits (maximum)8Color - ResinBlack Durability (mating cycles max)50Flammability94V-0Glow-Wire Compliant No Lock to Mating Part Yes Material - MetalBrass Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin Polyester Net Weight2.570/g Number of Rows 1Orientation Vertical PC Tail Length 4.37mm PCB Locator No PCB RetentionNone PCB Thickness - Recommended 1.60mm Packaging TypeBag Pitch - Mating Interface3.96mm Pitch - Termination Interface 3.96mm Plating min - Mating0.762µm Plating min - Termination 2.540µm Polarized to Mating Part Yes Polarized to PCB No Shrouded Partial StackableNoTemperature Range - Operating 0°C to +75°C Termination Interface: StyleThrough HoleElectricalSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Not Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 41671SeriesMates With2139 KK® Crimp Housing, 41695 KK®Crimp Housing, 6442 KK® Crimp Housing,2145 PCB Connector, 41815 PCB Connector, 3069 KK® Crimp HousingCurrent - Maximum per Contact7AVoltage - Maximum250VSolder Process DataDuration at Max. Process Temperature (seconds)5Lead-free Process Capability Wave Capable (TH only)Max. Cycles at Max. Process Temperature1Process Temperature max. C235Material InfoOld Part Number A-41671-C08A228Reference - Drawing NumbersProduct Specification PS-08-50Sales Drawing SD-41671-001This document was generated on 08/16/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0416710030。
0878321016;中文规格书,Datasheet资料
This document was generated on 08/16/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:87832-1016Status:ActiveOverview:Milli-Grid™ Connector SystemDescription:2.00mm Pitch Milli-Grid™ Header, Surface Mount, Vertical, Shrouded, Lead-Free, 10Circuits, 0.38µm Gold (Au) Plating, without Locking Window, Center Polarization Slot,Cap, without PCB Locator, TubeDocuments:3D ModelProduct Specification PS-87831-027 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR19980ULE29179GeneralProduct Family PCB Headers Series87832Application Signal, Wire-to-BoardComments With Cap|Contact Molex for application in automotive industryOverviewMilli-Grid™ Connector System Product Name Milli-Grid™UPC822350245807PhysicalBreakawayNo Circuits (Loaded)10Circuits (maximum)10Color - ResinBlack Durability (mating cycles max)100First Mate / Last Break No Flammability94V-0Glow-Wire Compliant No Guide to Mating Part No Keying to Mating Part Yes Lock to Mating Part YesMaterial - MetalPhosphor Bronze Material - Plating MatingGold Material - Plating Termination Tin Material - Resin Nylon Net Weight0.670/g Number of Rows 2Orientation Vertical PCB Locator No PCB Retention None Packaging TypeTube Pitch - Mating Interface2.00mm Pitch - Termination Interface 2.00mm Plating min - Mating0.381µm Plating min - Termination 1.905µm Polarized to PCB No Shrouded Fully StackableNo Surface Mount Compatible (SMC)YesTemperature Range - Operating-55°C to +105°CSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Not Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 87832SeriesMates With50394 Wire-to-Board Terminals, 51110Wire-to-Board Crimp Housing, 87568 Wire-to-Board IDT Housings, 79107 Board-to-Board Top Entry Through Hole Receptacle,79108 Board-to-Board FFC/FPC Top Entry Through Hole Receptacle, LTermination Interface: Style Through Hole and Surface MountElectricalCurrent - Maximum per Contact2AVoltage - Maximum125VSolder Process DataDuration at Max. Process Temperature (seconds)10Lead-free Process Capability Reflow Capable (SMT only)Max. Cycles at Max. Process Temperature1Process Temperature max. C260Material InfoReference - Drawing NumbersProduct Specification PS-87831-027Sales Drawing SD-87832-008This document was generated on 08/16/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0878321016。
744272251;中文规格书,Datasheet资料
5.1 5.0 4.02012-07-172012-07-172008-01-14SStSStSStSStSBaWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]F Typical Impedance Characteristics:H1: Classification Reflow Profile for SMT components:H2: Classification Reflow ProfilesProfile FeaturePreheat- Temperature Min (T smin ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Ramp-up rate (T L to T P )Liquidous temperature (T L )Time (t L ) maintained above T L Peak package body temperature (T p )Time within 5°C of actual peak temperature (t p )Ramp-down rate (T P to T L )Time 25°C to peak temperature Pb-Free Assembly 150°C 200°C60-180 seconds 3°C/ second max.217°C60-150 seconds See Table H320-30 seconds 6°C/ second max.8 minutes max.refer to IPC/JEDEC J-STD-020DH3: Package Classification Reflow TemperaturePB-Free Assembly PB-Free Assembly PB-Free Assembly Package Thickness< 1.6 mm 1.6 - 2.5 mm ≥ 2.5 mmVolume mm³<350260°C 260°C 250°CVolume mm³350 - 2000260°C 250°C 245°CVolume mm³>2000260°C 245°C 245°Crefer to IPC/JEDEC J-STD-020DH Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-SL5of Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the wire isolation has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the core, wire and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the core, wire and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Cleaning solvents which are used to clean the application might damage or change the characteristics of the component.Direct mechanical impact to the product shall be prevented as the ferrite material of the core could flake or in the worst case it could break. Product specific:Follow all instructions mentioned in the datasheet, especially:•The soldering profile has to be complied with according to the technical reflow soldering specification, otherwise no warranty will be su-stained.•All products are supposed to be used before the end of the period of 12 months based on the transfer of title, if not a 100% solderability can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 744272251。
744732121;中文规格书,Datasheet资料
2.0 1.02012-08-272010-01-11SStCZCZWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]C Schematic:F Typical Inductance vs. Current Characteristics:H4: Classification Wave Soldering Profile:H5: Classification Wave ProfileProfile FeaturePreheat- Temperature Min (T smin )- Temperature Typical (T stypical ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Δ preheat to max Temperature Peak temperature (T p )Time of actual peak temperature (t p )Ramp-down rate - Min - Typical - MaxTime 25°C to 25°C Pb-Free Assembly 100°C 120°C 130°C 70 seconds 150°C max.250°C - 260°C max. 10 secondsmax. 5 second each wave ~ 2 K/s ~ 3.5 K/s ~ 5 K/s 4 minutesSn-Pb Assembly 100°C 120°C 130°C 70 seconds 150°C max.235°C - 260°C max. 10 secondsmax. 5 second each wave ~ 2 K/s ~ 3.5 K/s ~ 5 K/s 4 minutesrefer to EN 61760-1:2006H Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-TISof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the wire isolation has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the core, wire and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the core, wire and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the wire in-sulation, the marking or the plating. The washing varnish agent could have a negative effect on the long turn function of the product.Direct mechanical impact to the product shall be prevented as the ferrite material of the core could flake or in the worst case it could break. Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical wave soldering specification, otherwise no warranty will be sustai-ned.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.•Due to heavy weight of the components of size 1014, strong forces and high accelerations might have the effect to damage the electrical connection or to harm the circuit board and will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 744732121。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
This document was generated on 08/07/2012
PLEASE CHECK FOR LATEST PART INFORMATION
Part Number:91627-2003Status:Active
Overview:RAST 5 Connector System
Description:
5.00mm Pitch Appli-Mate RAST 5 IDT Housing, Direct/Indirect, Female, 4 Circuits,Glow Wire Compatible, Removed Coding Keys None, End Wall Open
Documents:3D Model
Application Specification AS-91627-001 (PDF)Drawing (PDF)
Packaging Specification PK-91627-001 (PDF)Product Specification PS-91627-001 (PDF)
RoHS Certificate of Compliance (PDF)
Agency Certification
CSA LR19980UL
E29179
General
Product Family IDT and Solder Connectors Series
91627
Comments
"This Molex product is manufactured from material that has the following ratings, tested by independent agencies:. a) A Glow Wire Ignition Temperature (GWIT)of at least 775 deg C per IEC 60695-2-13.. b) A Glow Wire Flammability Index (GWFI) above 850 deg C per IEC 60695-2-12.and hence complies with the
requirements set out in the International Standard IEC 60335-1 5th edition - household and similar electrical appliances - safety, section 30 Resistance to heat and fire. <P><P> The customers using this product must determine its suitability for use in their particular application through testing or other acceptable means as described in end-product glow-wire flammability test standard IEC 60695-2-11 and any applicable product end-use standard(s). <P> If it is determined during the customer’s evaluation of suitability, that higher performance is required, please contact Molex for possible product options."Crimp Quality Equipment Yes
Overview
RAST 5 Connector System Product Name RAST 5
UPC 822350210119
Use With
RAST standard interface Physical
Circuits (Loaded)4Circuits (maximum)4
Color - Resin
Natural (White)Durability (mating cycles max)10Flammability 94V-2Gender
Female Glow-Wire Compliant Yes Lock to Mating Part Yes
Material - Metal
High Performance Alloy (HPA)Material - Plating Mating
Tin Material - Plating Termination Tin Material - Resin Nylon Net Weight
2.768/g
Series
image - Reference only
EU RoHS
China RoHS
ELV and RoHS Compliant REACH SVHC
Contains SVHC: No Low-Halogen Status Not Reviewed
Need more information on product environmental compliance?
Email productcompliance@
For a multiple part number RoHS Certificate of Compliance, click here
Please visit the Contact Us section for any non-product compliance questions.
Search Parts in this Series 91627Series
Mates With
90860 Appli-Mate® Vertical Header. 90861Appli-Mate® Right Angle Header Application Tooling | FAQ
Tooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.Global
Description Product #Appli-Mate Rast 2.5 Power Manual Terminator
0622030000RAST 2.5 Power Semi-Automatic Terminator Machine
0623006000
Number of Rows1
Packaging Type Tray
Panel Mount No
Pitch - Mating Interface 5.00mm
Pitch - Termination Interface 5.00mm
Plating min - Mating0.813µm
Plating min - Termination0.813µm
Polarized to Mating Part Yes
Stackable No
Temperature Range - Operating-40°C to +120°C
Termination Interface: Style IDT or Pierce
Wire Size AWG20, 22
Electrical
Current - Maximum per Contact6A
Voltage - Maximum250V AC
Material Info
Reference - Drawing Numbers
Application Specification AS-91627-001
Packaging Specification PK-91627-001
Product Specification PS-91627-001
Sales Drawing SD-91627-001, SD-91791-001, SD-93322-001
This document was generated on 08/07/2012
PLEASE CHECK FOR LATEST PART INFORMATION
分销商库存信息: MOLEX 0916272003。