P01N02LJA中文资料

合集下载

A22-01资料

Pushbutton Switch A30Easy mounting and removal of Switch Unit.Increase wiring ef ficiency with three-row mounting Array of Switch Blocks.Finger protection mechanism on Switch Unitprovided as a standard feature.Mounted using either open-type (fork-type) orclosed-type (round-type) crimp terminals.IP65 oil resistance (non-lighted models)IP65 (lighted models)EN60947-5-1206207Protruding guard Pushbutton Switches (Lighted Models)A30L-GRound Protruding Full Shippedas a set which includes the Pushbutton, Lamp (lighted models only), and Switch.Non-lighted Models (Round)Momentary operation (self-resetting)Alternate operation Illumination colorFlat type following letters into thebox j.(y )G (green)W (white)Protruding typeB (black)S S O C208S S O C209210Pushbuttons, Lamps, and Switches can be ordered separately . Combinations that are not available as sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs.Non-lighted ModelsPushbutton Lighted Models without Voltage Reduction Unit Lighted Models with Voltage Reduction Unit Pushbutton PushbuttonLamp Lamp Incandescent lamp LED lamp LED lamp SwitchSwitch (without V oltage Reduction Unit)Switch (with V oltage Reduction Unit)214RatingsContacts (Standard Load)Note: 1.The rated current shown was tested at JIS C4520 conditions. The ratings given are for the following test conditions, based on JISC4505.Ambient temperature: 20$2_CAmbient humidity: 65$5%Operating frequency: 20 operations/min.2.Minimum applicable load is 10 mA at 5 VDC.Contacts (Microload)LED LampNote:Ratings in parentheses show rated current for blue LEDs.Super-bright LED Lamp Incandescent Lamp Low-voltage Lighting。

Nailor Industries Inc. 火灾防护吸气门说明说明书

The following standard colors and finishes are available on applicable Nailor air distribution products. Consult individual product pages for availabilityC E I L I N GD I F F U SE R SModels UNI and AUNI • 20 x 20 (500 x 500) Face Size • 4-way Blow (360° Pattern)Nominal Neck SizeNeck Velocity, FPM 4005006007008009001000120014001600Velocity Pressure .010.016.023.031.040.051.063.090.122.1604"Dia.Total Pressure .023.036.051.07.091.115.142.205.279.364Airflow, CFM 35455060708085105120140Throw1-2-31-2-42-2-52-3-62-3-62-4-73-4-73-5-74-6-75-7-8Noise Criteria ———13.0001721243035405"Dia.Total Pressure 0000000000Airflow, CFM 55708095110125135165190220Throw2-2-42-3-52-3-63-4-73-5-84-6-94-7-94-8-105-8-106-9-11Noise Criteria ———141822253136416"Dia.Total Pressure .033.052.074.101.131.166.205.295.402.525Airflow, CFM 80100120140160180200235275315Throw2-3-53-4-63-5-74-5-85-6-95-7-105-8-106-9-117-10-127-10-13Noise Criteria —— 1.000151923263237427"Dia.Total Pressure .056.089.127.172.225.285.352.506.689.900Airflow, CFM 105135160190215240265320375430Throw3-4-63-5-74-6-94-7-105-8-106-8-116-9-127-10-138-11-149-12-15Noise Criteria ——11162024273338438"Dia.Total Pressure .067.105.160.205.268.340.418.600.821 1.070Airflow, CFM 140175210245280315350420490560Throw3-5-74-6-95-7-106-8-116-9-127-9-137-10-148-11-159-12-169-12-17Noise Criteria——1217212528343944Nominal Neck SizeNeck Velocity, FPM 4005006007008009001000120014001600Velocity Pressure .010.016.023.031.040.051.063.090.122.1606"Dia.Total Pressure .014.021.031.042.055.070.086.124.168.220Airflow, CFM 80100120140160180200235275315Throw1-3-52-3-42-4-52-4-62-5-63-4-73-5-84-6-94-6-105-6-10Noise Criteria ————1418222834398"Dia.Total Pressure 0000000000Airflow, CFM 140175210245280315350420490560Throw2-2-42-3-52-3-73-4-83-5-94-6-95-7-106-8-117-9-128-10-13Noise Criteria ———1318222632384310"Dia.Total Pressure . 031.049.071.096.126.159.196.283.385.503Airflow, CFM 220270330380435490545655765875Throw3-4-73-5-93-5-104-6-125-7-136-8-127-9-148-11-1510-12-1711-13-18Noise Criteria——1016212529354146Performance Notes:1. Thr ows ar e given at 150, 100 and 50 fpm ter minal velocities under isother mal conditions.2. All pr essur es ar e in inches w.g.. To obtain static pressure, subtract the velocitiy pressure from the total pressure.3. Return Applications:Use the following cor r ection factor s with the supply data.Noise Criteria = + 3 Noise Criteria (NC)Negative Static Pressure = Total Pressure x .454. Noise Cr iter ia (NC) values ar e based upon 10dB room absorption, re 10-12 watts.Dash (—) in space indicates an Noise Criteria of less than 10.5. Data der ived fr om tests conducted in acco r dance with ANSI/ASHRAEStandard 70 – 2006.CEILING DIFFUSERSPerformance Notes:1. Thr ows ar e given at 150, 100 and 50 fpm ter minal velocities under isother mal conditions.2. All pr essur es ar e in inches w.g.. To obtain static pressure, subtract the velocitiy pressure from the total pressure.3. Return Applications:Use the following cor r ection factor s withthe supply data.Noise Criteria = + 3 Noise Criteria (NC)Negative Static Pressure = Total Pressure x .454. Noise Cr iter ia (NC) values ar e based upon 10dB room absorption, re 10-12 watts.Dash (—) in space indicates an Noise Criteria of less than 10.5. Data der ived fr om tests conductedin acco r dance with ANSI/ASHRAEStandard 70 – 2006.Nominal Neck SizeNeck Velocity, FPM 4005006007008009001000120014001600Velocity Pressure .010.016.023.031.040.051.063.090.122.1606"Dia.Total Pressure .01.02.03.041.053.068.084.12.164.214Airflow, CFM 80100120140160180200235275315Throw1-3-41-3-42-4-52-4-62-5-63-4-73-5-84-6-94-6-105-6-10Noise Criteria ————1418222834398"Dia.Total Pressure 0000000000Airflow, CFM 140175210245280315350420490560Throw2-2-42-3-52-3-73-4-83-5-94-6-95-7-106-8-117-9-128-10-13Noise Criteria ———1318222632384310"Dia.Total Pressure .031.048.069.093.122.155.191.275.375.489Airflow, CFM 220270330380435490545655765870Throw3-4-73-5-93-5-104-6-125-7-135-8-127-9-148-11-1510-12-1711-13-18Noise Criteria —— 1.0001621252935414612"Dia.Total Pressure .04.063.09.123.161.203.251.361.492.643Airflow, CFM 31539047055063070578594011001255Throw4-5-104-7-135-8-147-9-168-11-178-12-1710-14-1911-15-2014-17-2316-18-25Noise Criteria ——131924283238444914"Dia.Total Pressure .054.083.12.163.214.27.334.481.655.855Airflow, CFM 4255306357458509551060127014901695Throw5-7-146-9-164329244117452454524714-19-2616-21-2819-22-3120-24-33Noise Criteria ——152126303440465115"Dia.Total Pressure .065.102.147.2.26.33.408.588.799 1.044Airflow, CFM 49061573586098511101230147017201970Throw6-9-177-11-199-13-2111-16-2414-19-2614-20-2716-21-3019-24-3323-26-3523-27-38Noise Criteria——1622273135414752C E I L I N GD I F F U SE R SModels UNI and AUNI • 24 x 24 (600 x 600) Face Size • 3-Way BlowPerformance Notes:1. Thr ows ar e given at 150, 100 and 50 fpm ter minal velocities under isother mal conditions.2. All pr essur es ar e in inches w.g.. To obtain static pressure, subtract the velocitiy pressure from the total pressure.3. Noise Cr iter ia (NC) values ar e based upon 10dB room absorption, re 10-12 watts.Dash (—) in space indicates an Noise Criteria of less than 10.4. Data der ived fr om tests conducted in acco r dance with ANSI/ASHRAEStandard 70 – 2006.Nominal Neck SizeNeck Velocity, FPM 300400500600700800900100012001400Velocity Pressure .006.010.016.023.031.040.051.063.090.1226"Dia.Total Pressure .035.061.096.138.188.245.311.383.529.725Airflow, CFM 6080100120140160180200235275Throw2-4-63-6-95-7-95-8-106-9-127-9-137-10-148-11-158-12-169-13-17Noise Criteria ——12182327313440458"Dia.Total Pressure .076.135.211.304.414.540.684.844 1.215 1.654Airflow, CFM 105140175210245280315350420490Throw3-5-75-7-105-8-116-9-127-10-137-10-148-11-159-12-169-12-1710-13-18Noise Criteria——1420252933364247Nominal Neck SizeNeck Velocity, FPM 300400500600700800900100012001400Velocity Pressure .006.010.016.023.031.040.051.063.090.1226"Dia.Total Pressure .010.018.028.041.055.072.091.113.155.213Airflow, CFM 6080100120140160180200235275Throw1-3-41-3-42-4-52-5-63-4-74-5-84-6-94-6-105-6-106-7-11Noise Criteria ———111722263036428"Dia.Total Pressure .016.028.043.062.085.111.140.173.249.339Airflow, CFM 105140175210245280315350420490Throw2-2-42-3-63-4-83-5-84-6-95-7-106-8-117-9-128-10-139-11-14Noise Criteria ———1521263034404610"Dia.Total Pressure .032.057.085.127.169.221.281.347.501.684Airflow, CFM 165220270330380435490545655765Throw3-4-73-5-94-6-105-7-115-8-127-10-138-11-159-12-1611-13-1812-14-19Noise Criteria ———1824293337434912"Dia.Total Pressure .043.077.118.171.235.308.386.478.686.939Airflow, CFM 2353153904705506307057859401100Throw4-5-105-7-136-9-158-11-179-13-1810-14-1911-15-2013-16-2216-18-2518-21-28Noise Criteria ——122127323640465214"Dia.Total Pressure .060.106.165.237.326.425.536.661.949 1.306Airflow, CFM 320425530635745850955106012701490Throw5-7-146-9-169-12-1911-15-2312-18-2414-19-2616-21-2819-21-3020-24-3321-26-35Noise Criteria ——142329343842485415"Dia.Total Pressure .074.130.205.293.401.526.668.820 1.172 1.604Airflow, CFM 3704906157358609851110123014701720Throw6-9-178-12-2011-16-2414-19-2614-20-2717-22-3119-24-3322-25-3523-27-3824-29-40Noise Criteria——1524303539434955CEILING DIFFUSERS Models UNI and AUNI • 24 x 24 (600 x 600) Face Size • 2-Way BlowPerformance Notes:1. Thr ows ar e given at 150, 100 and 50 fpm ter minal velocities under isother mal conditions.2. All pr essur es ar e in inches w.g.. To obtain static pressure, subtract the velocitiy pressure from the total pressure.3. Noise Cr iter ia (NC) values ar e based upon 10dB room absorption, re 10-12 watts. Dash (—) in space indicates an Noise Criteria of less than 10.4. Data der ived fr om tests conducted in acco r dance with ANSI/ASHRAEStandard 70 – 2006.Nominal Neck Size Neck Velocity, FPM20030040050060070080090010001200 Velocity Pressure.003.006.010.016.023.031.040.051.063.0906" Dia.Total Pressure.032.071.126.198.284.387.506.640.790 1.091 Airflow, CFM406080100120140160180200235 Throw2-4-64-6-95-8-106-9-127-9-138-11-158-12-169-12-179-13-1810-13-19 Noise Criteria——16222530343841478" Dia.Total Pressure.074.166.294.460.662.902 1.178 1.491 1.840 2.650 Airflow, CFM70105140175210245280315350420 Throw3-5-75-7-106-9-127-10-148-11-159-12-169-12-1710-12-1810-13-1911-14-20 Noise Criteria—111824273236404349Nominal Neck Size Neck Velocity, FPM300400500600700800900100012001400 Velocity Pressure.006.010.016.023.031.040.051.063.090.1226" Dia.Total Pressure.007.016.028.043.063.085.111.141.174.240 Airflow, CFM406080100120140160180200235 Throw1-3-42-4-52-5-63-4-74-6-94-6-105-6-106-7-116-8-127-9-13 Noise Criteria———121824293337438" Dia.Total Pressure.013.028.050.078.113.153.200.253.313.450 Airflow, CFM70105140175210245280315350420 Throw2-2-42-3-73-5-95-7-96-8-117-9-128-10-139-11-1410-12-1511-13-17 Noise Criteria———1622283337414710" Dia.Total Pressure.029.065.115.174.259.344.451.572.707 1.022 Airflow, CFM110165220270330380435490545655 Throw3-4-73-5-105-7-137-9-148-11-1510-12-1711-13-1811-14-1812-15-1913-17-22 Noise Criteria——121925313641445012" Dia.Total Pressure.042.09.162.248.36.493.647.811 1.005 1.441 Airflow, CFM160235315390470550630705785940 Throw4-5-105-8-148-11-1710-14-1911-15-2014-17-2316-18-2516-19-2518-21-2719-22-29 Noise Criteria——152228343943475314" Dia.Total Pressure.056.130.229.356.511.704.916 1.156 1.425 2.045 Airflow, CFM21032042553063574585095510601270 Throw5-7-147-11-1811-15-2314-19-2616-21-2819-22-3120-24-3320-26-3323-28-3625-30-38 Noise Criteria——172430364145495515" Dia.Total Pressure.071.161.283.446.637.872 1.144 1.453 1.784 2.548 Airflow, CFM245370490615735860985111012301470 Throw6-9-179-13-2114-19-2616-21-3019-24-3323-26-3523-27-3823-28-3925-29-4228-31-42 Noise Criteria—101825313742465056Pagew w w.n a i l o r.c o mCalgary, Canada Tel: 403-279-8619Fax: 403-279-5035Houston, Texas Tel: 281-590-1172Fax: 281-590-3086Toronto, Canada Tel: 416-744-3300Fax: 416-744-3360Las Vegas, Nevada Tel: 702-648-5400Fax: 702-638-0400"C o m p l e t e A i r C o n t r o l a n d D i s t r i b u t i o n S o l u t i o n s."Page 5.0219/09 IOM-FRDFINST 1.Follow carefully steps 1, 2 and 3.2.Before installing, open damper blades and install link between spring loaded wire clips. Do not bend or deform clips after assembly. If dampers are provided with link tabs instead of wire clips, install link and bend tabs to secure link in position3.The Flexible Air Duct Connector shall be Class 0 or Class 1 bearing the UL/ULC Classification marking.See the UL "Gas and Oil Equipment Directory" or ULC "List of Equipment and Materials". The maximum length of the flexible duct shall not exceed 14'-0" (4267) in length. No portion of the duct shall rest on the back surface of the ceiling panels or tiles and a minimum of 4" (102) clearance must be maintained.Where the flexible duct must be supported, use steel straps and 12 swg steel hanger wires.4.The end tabs of the 2'-0" (600) Cross T-bar shall be bent back against the web of the 4'-0" (1200) Cross T-bar. The 4'-0" (1200) Cross T-bars must have slots in the web for connection of the 2'-0" (600) Cross T-bar.e 12 swg galvanized steel hanger wires to independently support the ceiling T-bars to the structural members of the floor or roof above at the four corners of the diffuser. Ensure hanger wires are plumb and straight.6.Maximum neck size of Series 4000 and 4400 Ceiling Air Diffuser is 14" (356) diameter.7.Caution should be observed so that the Flexible Air Duct Connector does not interfere with the operation of the Integral Classified Ceiling Damper of the Ceiling Air Diffuser Assembly.8.No diffusers shall be located in an adjacent 24" x 48" (600 x 1200) ceiling grid module.9.Series 4000 and 4400 Ceiling Air Diffuser Assemblies are for use in lieu of the hinged blade, sheet metal damper in steel ducts with steel diffusers or grilles as specified in the "Design Information Section -General" and in the individual floor and roof ceiling design(s) being used, as illustrated and described in the current U.L. "Fire Resistance Directory" or ULC "List of Equipment and Materials".10.Fire resistive designs must cover UL/ULC Classified Ceiling Grid Members with appropriate cross tee sizes and slots in cross tees.The following manufacturers currently supply 1'-0" (300) long cross tees that are UL and/or ULC Classified:-Armstrong World Industries Inc.-CGC Interiors, Division of CGC Inc.-Chicago Metallic Corp.-USG Interiors Inc.Cartons of Grid Members shall be of the same type and bear the UL and/or ULC Classification marking.Page 2 of 2Dimensions are in inches (mm).Nailor Industries Inc. reserves the right to change any information concerning product or specification without notice or obligation.Pagew w w.n a i l o r.c o mCalgary, Canada Tel: 403-279-8619Fax: 403-279-5035Houston, Texas Tel: 281-590-1172Fax: 281-590-3086Toronto, Canada Tel: 416-744-3300Fax: 416-744-3360Las Vegas, Nevada Tel: 702-648-5400Fax: 702-638-0400"C o m p l e t e A i r C o n t r o l a n d D i s t r i b u t i o n S o l u t i o n s."Page 5.0119/09 IOM-FRDSINST 1.Follow carefully steps 1, 2 and 3.2.Before installing, open damper blades and install link between spring loaded wire clips. Do not bend or deform clips after assembly. If dampers are provided with link tabs instead of wire clips, install link and bend tabs to secure link in positione 12 swg galvanized steel hanger wires to independently support the T-bar grid members and the support channels to the structural members of the floor or roof above at the four corners of the diffuser.Ensure hanger wires are plumb and straight.4.When installing the Ceiling Air Diffuser in duct drop, use #8 by 1/2" (13) long sheet metal screw s - 4 per diffuser. The screws shall not interfere with the closing of the Integral Classified Ceiling Damper of the Ceiling Air Diffuser Assembly.5.Support the duct with 2 - 16 gauge cold rolled steel support channels, 1 1/2" (38) deep with 1/2" (13)flanges. Place the support channels at the bottom of the duct adjacent to both sides of the duct drop.6.Maximum neck size of Series 4000 and 4400 Ceiling Air Diffuser is 14" (356) diameter.7.The clearance between the Ceiling Air Diffuser neck and the duct drop shall be 1/8" (3) maximum.8.No diffusers shall be located in an adjacent 24" x 48" (600 x 1200) ceiling grid module.9.Series 4000 and 4400 Ceiling Air Diffuser Assemblies are for use in lieu of the hinged blade, sheet metal damper in steel ducts with steel diffusers or grilles as specified in the "Design Information Section -General" and in the individual floor and roof ceiling design(s) being used, as illustrated and described in the current UL "Fire Resistance Directory" or ULC "List of Equipment and Materials".10.Fire resistive designs must cover UL/ULC Classified Ceiling Grid M embers with appropriate cross tee sizes and slots in cross tees.The following manufacturers currently supply 1'- 0" (300) long cross tees that are UL and/or ULC Classified:-Armstrong World Industries Inc.-CGC Interiors, Division of CGC Inc.-Chicago Metallic Corp.-USG Interiors Inc.Cartons of Grid Members shall be of the same type and bear the UL and/or ULC Classification marking.Page 2 of 2Dimensions are in inches (mm).。

1N1200A中文资料

Characteristics Forward voltage – Durchlaßspannung Leakage current – Sperrstrom Thermal resistance junction to stud Wärmewiderstand Sperrschicht – Gehäuse
Grenzwerte Surge peak reverse voltage Stoßspitzensperrspannung VRSM [V] 60 120 240 480 720 1000 1200 12 A 1) 40 A 1) 220 A 240 A 240 A2s
Max. average forward rectified current, R-load Dauergrenzstrom in Einwegschaltung mit R-Last Repetitive peak forward current Periodischer Spitzenstrom Peak forward surge current, 50 Hz half sine-wave Stoßstrom für eine 50 Hz Sinus-Halbwelle Peak forward surge current, 60 Hz half sine-wave Stoßstrom für eine 60 Hz Sinus-Halbwelle Rating for fusing – Grenzlastintegral, t < 10 ms
元器件交易网
1N 1199A ... 1N 1206A, 1N 3671, 1N 3673 PBY 271 ... PBY 277 Silicon-Power Rectifiers Nominal current – Nennstrom Repetitive peak reverse voltage Periodische Spitzensperrspannung Metal case – Metallgehäuse Weight approx. – Gewicht ca. Recommended mounting torque Empfohlenes Anzugsdrehmoment Silizium-Leistungs-Gleichrichter 12 A 50...1000 V DO-4 5.5 g 18 ± 10% lb.in. 2 ± 10% Nm

海尔电器 1 CAT2125 扭矩钳操作说明书

• Keep body working stance balanced and firm. Do not overreach when operating the tool.
• Anticipate and be alert for sudden changes in motion during start up and operation of any power tool.
• Do not force tool beyond its rated capacity. • Do not remove any labels. Replace any
damaged labels.
Rev. 09/ctions • Warning Information • Parts Breakdown
• Operators and maintenance personnel must be physically able to handle the bulk, weight and power of this tool.
• Air under pressure can cause severe injury. Never direct air at yourself or others. Always turn off the air supply, drain hose of air pressure and detach tool from air supply before installing, removing or adjusting any accessory on this tool, or before performing any maintenance on this tool. Failure to do so could result in injury. Whip hoses can cause serious injury. Always check for damaged, frayed or loose hoses and fittings, and replace immediately. Do not use quick detach couplings at tool. See instructions for correct set-up.

奥特拉斯科波油注旋绞缠压缩机产品说明书

Oil-injected rotary screw compressorsG 2-22 kW, designed and built for AustraliaAtlas CopcoAtlas Copco, based in Stockholm, Swedenand founded in 1873, is an industrial group with a world-leading position in compressors, construction and mining equipment, power tools and assembly systems. Atlas Copco providesoptimised compressed air solutions through sustainable productivity.Atlas Copco AustraliaOur passionate people, expertise and unmatched service have been bringing sustainable value and innovations to wide range of Australian industries for over 70 years.New G series: screw compressors built to lastAtlas Copco compressors have always set the standard for reliability and performance in the compressed air industry. With the new G 2-5 and G 7-22. Atlas Copco brings the power and durability of an industrial screw compressor to any type of small or medium sized industry.Built-in reliability• R ugged screw compressor technology fora 100% continuous duty cycle.• U p to 46°C ambient temperature conditions thanks to the selection of robust components.• E lectro pneumatically operated inlet valvefor stable running and a long life time.Easy installation• W ireless concept.• M ultiple variants (floor and tank mounted. with or without integrated dryer) for full flexibility.• M inimum footprint and cooling air discharge from the top allows placement against the wall or in a corner.Simple & quick maintenance• P atented cooler for easy cleaning and maintenance.• G rouped service points accessible throughthe removable panel.• S pin-on oil separator and filter. Designed and built for AustraliaOur G series compressors range are fully designed and built for the Australian conditions. We have included as standard the following features in the complete range:• A ir Receivers & Oil Separators* fully designed, built, and tested under the AS1210 Standard. Peace of mind when you need the right paperwork for your pressure vessels in Australia.• A ll the electrical motors in the range are tested and registered under the Australian Greenhouse & Energy Minimum Standards (GEMS) Regulator meeting or exceeding the minimum energy efficiency required for Australia.• A tlas Copco Elektronikon® Mk5S Touch Controller standard in the complete range.• T ropical Thermostat to reduce the possibility of having oil condensate in the system.• E lectronic drain in the air receiver (Tank mounted units).*G2 to 5 Oil Separators Hazard level “E” under AS4343 are excepted of the AS1210 registration.Integrated quality air solutions• T he integrated dryer avoids condensation and corrosion in the network. Optional filters for air quality up to class 1 level (<0.01 ppm).• S tandard included water-separator.• A dditional energy savings with the dryer’s no-loss mechanic drain.4Easy installation• A true plug-and-play solution, ideal machine for installation companies and OEMs.• E asy transportation by forklift. • R emarkably compact footprint.5Robust element & motor• T he G’s compression element, the most used in its size.• 2-3% higher efficiency with V-belt compared to other belt-driven systems on the G 2-22.1Advanced monitoring• S tate-of-the-art monitoring using a simple Ethernet connection.• S ervice and warning indications. error detection and compressor shut-down. • E lektronikon® Touch controller for further enhanced remote monitoring features and service time indications.2High tech oil vessel• P rotection from oil contamination: extremely low oil carry-over thanks to the vertical design of the oil vessel.• E xtremely low losses of compressed air during load/unload cycle thanks to minimized oil vessel size. • O il Separators* fully designed, built, and tested under the AS1210 Standard. Peace of mind when you need the right paperwork for your pressure vessels in Australia.*G2 to 5 Oil Separators Hazard level “E” under AS43433* Complete G range is equipped with the Elektronikon ® Mk5S Touch Controlleras a standard for Australian market.WH LLWHLW H LWHPack Floor G 7-22Pack Tank G 2-22FF Tank G 2-22* Complete G range is equipped with the Elektronikon® Mk5S Touch Controlleras a standard for Australian market.。

CDP2 Definite Purpose Contactors 一元和两元型号说明书

C D P 2 C o n t a c t o r sA180Discount Schedule B8Series CDP2 1-pole contactorSeries CDP2 2-pole contactor(with optional cover)➊ 25A contactors only available by special order. Contact your Sprecher +Schuh representative.➋ 240V rating also applies to 277V applications.➌ Box Power Lugs are supplied as standard. Screw terminals are available on the power connections by special order only in quantity.➍ 1 and 2 Pole, 25 and 30A contactors supplied without cover. See Accessories for cover options.➎ Screw Power Terminals are supplied standard on 25 and 30A contactors. Box Lugs available by special order only in quantity.➏ 1-Pole (1-pole plus) contactors include a shunt for termination and feed-thru of neutral.➐ 40 Amp contactors are supplied with cover as standard.C D P 2 C o n t a c t o r sA➊ 25A contactors available by special order. Contact your Sprecher + Schuh representative.➋ 240V rating also applies to 277V applications.➌ Box lugs are supplied as standard. Screw terminals are available on the power connections by special order only in quantity.➍ Screw power terminals are supplied standard on 25 and 30A contactors. Box Lugs available by special order only in quantity.➎ Meets NEMA Standard B600. See page A7 for technical details.➏ Meets NEMA Standard B600 EXCEPT has 10 A continuous current rating.Series CDP2 3-pole contactorC D P 2 C o n t a c t o r sA182Discount Schedule B8Four Pole Definite Purpose Contactors With AC Coil (Open Type only)➊ 25A contactors available by special order. Contact your Sprecher + Schuh representative.➋ 240V rating also apples to 277V applications.➌ Box Power Lugs are supplied as standard. Screw terminals are available on the power con-nections by special order only in quantity.➍ Screw per terminals are supplied standard on 25 and 30A contactors. Box Lugs available by special order only in quantity.Series CDP2 4-pole contactorC D P 2 C o n t a c t o r sASeries CDP2 3-pole contactor Series CDP2 1-pole contactorDescriptionSprecher + Schuh Definite Purpose contactors can be used to con-trol a mixture of lighting loads. These contactors are well suited to handle the high inrush currents typical of this application as well as other non-motor (resistive) loads.Lamps can basically be divided into three categories:• T ungsten Filament Lamps- General purpose incandescent - Special purpose incandescent - Infrared- Sodium Iodine• Discharge Lamps (with Ballast) - Fluorescent lamps - Mercury vapor - High/low pressure sodium - Quartz- Halogen metal-vapor • Mixed Light LampsIn Application...The tungsten filaments of incandescent lamps have a very low ohmic resistance when cold. As a result, the closing current is very high but also very short. The closing current of discharge lamps (lighting with ballast) is highly inductive (due to series-connected transformers or chokes), and its duration depends on the lamp type.Electrically held contactorsElectrically held contactors are available for use where the control signal is activated by a timer or other maintained electrical signal. The coil is energized as long as the contactor is closed. This design is well suited for applications where lights are operated frequently or where the control panel is in a remote location.C D P 2 C o n t a c t o r sA184Discount Schedule B8。

Eaton FD3200LA06N02商品说明书

Eaton FD3200LA06N02Eaton Series C complete molded case circuit breaker, F-frame, FD, Fixed thermal and magnetic trips, Three-pole, 200A, 600 Vac, 250 Vdc, 65 kAIC at 240 Vac, 35 kAIC at 480 Vac, 1A-1B rear w/right pigtail, 24 Vdc rear w/ left pigtailGeneral specificationsEaton Series C complete molded case circuit breakerFD3200LA06N027821134911413.38 in4.13 in 4.13 in 4.5 lb Eaton Selling Policy 25-000, one (1) year from the date of installation of the Product or eighteen (18) months from the date of shipment of the Product, whichever occurs first.UL Listed Product NameCatalog Number UPCProduct Length/Depth Product Height Product Width Product Weight WarrantyCertifications35 kAIC at 480 Vac65 kAIC at 240 VacF200 AThree-poleSeries CFD24 Vdc three-pole left50 to 60 HzComplete breakerLine and load600 Vac, 250 Vdc1A-1B rear with right pigtail Fixed thermal, fixed magnetic Application of Tap Rules to Molded Case Breaker Terminals Application of Multi-Wire Terminals for Molded Case Circuit BreakersUL listed 100%-rated molded case circuit breakersCircuit breaker motor operators product aidPower metering and monitoring with Modbus RTU product aidMulti-wire lugs product aidMotor protection circuit breakers product aidPlug-in adapters for molded case circuit breakers product aidMOEM MCCB Product Selection GuideCurrent limiting Series C molded case circuit breakers product aid StrandAble terminals product aidBreaker service centersCounterfeit and Gray Market Awareness GuideMolded case circuit breakers catalogEaton's Volume 4—Circuit ProtectionTime Current Curves for Series C® F-Frame Circuit BreakersInstallation Instructions for EHD, EDB, EDS, ED, EDH, EDC, FDB, FD, HFD, FDC, HFDDC Circuit Breakers and Molded Case SwitchesCircuit Breakers ExplainedCircuit breakers explainedSeries C F-Frame molded case circuit breakersSeries C J-Frame molded case circuit breakers time current curves Series C G-Frame molded case circuit breakers time current curves MOEM MCCB product selection guideEaton Specification Sheet - FD3200LA06N02Interrupt ratingFrameAmperage Rating Number of polesSeriesCircuit breaker type Shunt tripFrequency ratingCircuit breaker frame type TerminalsVoltage ratingAuxiliary switchTrip Type Application notesBrochuresCatalogsDrawingsInstallation instructions MultimediaSpecifications and datasheetsEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia。

各种蒙乃尔合金板牌号作用及性能

各种蒙乃尔‎合金板牌号‎作用及性能‎蒙乃尔合金‎板牌号10‎60是指要‎求抗蚀性与‎成形性均高‎的场合，但对强度要‎求不高；蒙乃尔合金‎板牌号11‎00是指用‎于加工需要‎有良好的成‎形性和高的‎抗蚀性但不‎要求有高强‎度的零件部‎件，例如食品工‎业装置与贮‎存容器、薄板加工件‎、深拉或旋压‎凹形器皿、焊接零部件‎、热交换器、印刷板、铭牌、反光器具；蒙乃尔合金‎板牌号11‎45是指包‎装及绝热铝‎箔，热交换器；蒙乃尔合金‎板牌号11‎99是指电‎解电容器箔‎，光学反光沉‎积膜；蒙乃尔合金‎板牌号13‎50是指电‎线、导电绞线、汇流排、变压器带材‎；蒙乃尔合金‎板牌号20‎11是指螺‎钉及要求碳硫分析仪‎有良好切削‎性能的机械‎加工产品；蒙乃尔合金‎板牌号20‎14是指应‎用于要求高‎强度与硬度‎（包括高温）的场合。

飞机重型、锻件、厚板和挤压‎材料，车轮与结构‎元件，多级火箭第‎一级燃料槽‎与航天器零‎件，卡车构架与‎悬挂系统零‎件；蒙乃尔合金‎板牌号20‎17是指是‎第一个获得‎工业应用的‎2XXX系‎合金，目前的应用‎范围较窄，主要为铆钉‎、通用机械零‎件、结构与运输‎工具结构件‎，螺旋桨与配‎件；蒙乃尔合金‎板牌号20‎24是指飞‎机结构、铆钉、导弹构件、卡车轮毂、螺旋桨元件‎及其他种种‎结构件；蒙乃尔合金‎板牌号20‎36是指汽‎车车身钣金‎件；蒙乃尔合金‎板牌号20‎48是指航‎空航天器结‎构件与兵器‎结构零件；蒙乃尔合金‎板牌号21‎24是指航‎空航天器结‎构件；蒙乃尔合金‎板牌号22‎18是指飞‎机发动机和‎柴油发动机‎活塞，飞机发动机‎汽缸头，喷气发动机‎叶轮和压缩‎机环；蒙乃尔合金‎板牌号22‎19是指航‎天火箭焊接‎氧化剂槽，超音速飞机‎蒙皮与结构‎零件，工作温度为‎-270~300摄氏‎度。

焊接性好，断裂韧性高‎，T8状态有‎很高的抗应‎力腐蚀开裂‎能力；蒙乃尔合金‎板牌号23‎19是指焊‎拉2219‎合金的焊条‎和填充焊料‎；蒙乃尔合金‎板牌号26‎18是碳硫分析仪‎指模锻件与‎自由锻件。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

元器件交易网
NIKO-SEM
N-Channel Logic Level Enhancement Mode Field Effect Transistor
( Preliminary)
P01N02LJA
J-LEAD8
D
PRODUCT SUMMARY V(BR)DSS 25V RDS(ON) 70mΩ ID 1.2A 4 :GATE 5,6,7,8 :DRAIN 1,2,3 :SOURCE
1
SYMBOL VGS
LIMITS ±15 1.2 1.0 12 0.6 0.5 -55 to 150 275
UNITS V
TC = 25 °C TC = 100 °C TC = 25 °C TC = 100 °C
ID IDM PD Tj, Tstg TL
A
W
Operating Junction & Storage Temperature Range Lead Temperature ( /16” from case for 10 sec.) THERMAL RESISTANCE RATINGS THERMAL RESISTANCE Junction-to-Case Junction-to-Ambient
G S
ABSOLUTE MAXIMUM RATINGS (TC = 25 °C Unless Otherwise Noted) PARAMETERS/TEST CONDITIONS Gate-Source Voltage Continuous Drain Current Pulsed Drain Current Power Dissipation
2 2
Ciss Coss Crss Qg Qgs Qgd
2
120 VGS = 0V, VDS = 15V, f = 1MHz 100 85 11 VDS = 0.5V(BR)DSS, VGS = 10V, ID = 1A 3.0 5.8 7 VDS = 15V, RL = 1Ω ID ≅ 1A, VGS = 10V, RGS = 50Ω 20 13 19 nS nC pF
Gate-Source Charge Gate-Drain Charge Rise Time2
2
Turn-On Delay Time
td(on) tr td(off) tf
Turn-Off Delay Time2 Fall Time2
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS (TC = 25 °C) Continuous Current Pulsed Current3 Forward Voltage1 Reverse Recovery Time Reverse Recovery Charge
1 2
IS ISM VSD trr Qrr IF = IS, VGS = 0V IF = IS, dlF/dt = 100A / µS
1.2 12 1.3 70 0.22
A V nS µC
Pulse test : Pulse Width ≤ 300 µsec, Duty Cycle ≤ 2％. Independent of operating temperature. 3 Pulse width limited by maximum junction temperature. REMARK: THE PRODUCT MARKED WITH “102B”
Dimension A B C D E F G
Dimension H I J K L M N
3
AUG-30-2002
2
AUG-30-2002
元器件交易网
NIKO-SEM
N-Channel Logic Level Enhancement Mode Field Effect Transistor
( Preliminary)
P01N02LJA
J-LEAD8
J-LEAD8 MECHANICAL DATA
mm Min. Typ. 0.50 0.15 1.65 2.00 1.80 0.70 2.20 2.00 0.90 0.3 1.85 2.40 2.20 1.00 1.10 Max. mm Min. 0.10 0.048 0 0.35 1.80 0.45 2.10 0.1 0.55 2.40 Typ. Max. 0.20
1 1°CSYMBOL RθJ Nhomakorabea RθJA
TYPICAL
MAXIMUM 65 230
UNITS °C / W
Pulse width limited by maximum junction temperature.
ELECTRICAL CHARACTERISTICS (TC = 25 °C, Unless Otherwise Noted) PARAMETER SYMBOL TEST CONDITIONS STATIC Drain-Source Breakdown Voltage Gate Threshold Voltage Gate-Body Leakage Zero Gate Voltage Drain Current On-State Drain Current1 Drain-Source On-State Resistance1 Forward Transconductance1 V(BR)DSS VGS(th) IGSS IDSS ID(ON) RDS(ON) gfs VGS = 0V, ID = 250 µA VDS = VGS, ID = 250 µA VDS = 0V, VGS = ±15V VDS = 20V, VGS = 0V VDS = 20V, VGS = 0V, TJ = 125 °C VDS = 10V, VGS = 10V VGS = 7V, ID = 1.2A VGS = 10V, ID = 1.2A VDS = 20V, ID = 1.2A 1.2 120 70 16 180 120 25 0.7 1.0 2.5 ±250 25 250 V nA µA A mΩ S LIMITS UNIT MIN TYP MAX
1
AUG-30-2002
元器件交易网
NIKO-SEM
N-Channel Logic Level Enhancement Mode Field Effect Transistor
( Preliminary)
P01N02LJA
J-LEAD8
DYNAMIC Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge