KU-55933_LCMS_04906_MedChemExpress
SHP099-SDS-MedChemExpress
Inhibitors, Agonists, Screening LibrariesSafety Data Sheet Revision Date:Oct.-09-2018Print Date:Oct.-09-20181. PRODUCT AND COMPANY IDENTIFICATION1.1 Product identifierProduct name :SHP099Catalog No. :HY-100388CAS No. :1801747-42-11.2 Relevant identified uses of the substance or mixture and uses advised againstIdentified uses :Laboratory chemicals, manufacture of substances.1.3 Details of the supplier of the safety data sheetCompany:MedChemExpress USATel:609-228-6898Fax:609-228-5909E-mail:sales@1.4 Emergency telephone numberEmergency Phone #:609-228-68982. HAZARDS IDENTIFICATION2.1 Classification of the substance or mixtureNot a hazardous substance or mixture.2.2 GHS Label elements, including precautionary statementsNot a hazardous substance or mixture.2.3 Other hazardsNone.3. COMPOSITION/INFORMATION ON INGREDIENTS3.1 SubstancesSynonyms:SHP 099;SHP-099Formula:C16H19Cl2N5Molecular Weight:352.26CAS No. :1801747-42-14. FIRST AID MEASURES4.1 Description of first aid measuresEye contactRemove any contact lenses, locate eye-wash station, and flush eyes immediately with large amounts of water. Separate eyelids with fingers to ensure adequate flushing. Promptly call a physician.Skin contactRinse skin thoroughly with large amounts of water. Remove contaminated clothing and shoes and call a physician.InhalationImmediately relocate self or casualty to fresh air. If breathing is difficult, give cardiopulmonary resuscitation (CPR). Avoid mouth-to-mouth resuscitation.IngestionWash out mouth with water; Do NOT induce vomiting; call a physician.4.2 Most important symptoms and effects, both acute and delayedThe most important known symptoms and effects are described in the labelling (see section 2.2).4.3 Indication of any immediate medical attention and special treatment neededTreat symptomatically.5. FIRE FIGHTING MEASURES5.1 Extinguishing mediaSuitable extinguishing mediaUse water spray, dry chemical, foam, and carbon dioxide fire extinguisher.5.2 Special hazards arising from the substance or mixtureDuring combustion, may emit irritant fumes.5.3 Advice for firefightersWear self-contained breathing apparatus and protective clothing.6. ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency proceduresUse full personal protective equipment. Avoid breathing vapors, mist, dust or gas. Ensure adequate ventilation. Evacuate personnel to safe areas.Refer to protective measures listed in sections 8.6.2 Environmental precautionsTry to prevent further leakage or spillage. Keep the product away from drains or water courses.6.3 Methods and materials for containment and cleaning upAbsorb solutions with finely-powdered liquid-binding material (diatomite, universal binders); Decontaminate surfaces and equipment by scrubbing with alcohol; Dispose of contaminated material according to Section 13.7. HANDLING AND STORAGE7.1 Precautions for safe handlingAvoid inhalation, contact with eyes and skin. Avoid dust and aerosol formation. Use only in areas with appropriate exhaust ventilation.7.2 Conditions for safe storage, including any incompatibilitiesKeep container tightly sealed in cool, well-ventilated area. Keep away from direct sunlight and sources of ignition.Recommended storage temperature:Powder-20°C 3 years4°C 2 yearsIn solvent-80°C 6 months-20°C 1 monthShipping at room temperature if less than 2 weeks.7.3 Specific end use(s)No data available.8. EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parametersComponents with workplace control parametersThis product contains no substances with occupational exposure limit values.8.2 Exposure controlsEngineering controlsEnsure adequate ventilation. Provide accessible safety shower and eye wash station.Personal protective equipmentEye protection Safety goggles with side-shields.Hand protection Protective gloves.Skin and body protection Impervious clothing.Respiratory protection Suitable respirator.Environmental exposure controls Keep the product away from drains, water courses or the soil. Cleanspillages in a safe way as soon as possible.9. PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical propertiesAppearance Light yellow to yellow (Solid)Odor No data availableOdor threshold No data availablepH No data availableMelting/freezing point No data availableBoiling point/range No data availableFlash point No data availableEvaporation rate No data availableFlammability (solid, gas)No data availableUpper/lower flammability or explosive limits No data availableVapor pressure No data availableVapor density No data availableRelative density No data availableWater Solubility No data availablePartition coefficient No data availableAuto-ignition temperature No data availableDecomposition temperature No data availableViscosity No data availableExplosive properties No data availableOxidizing properties No data available9.2 Other safety informationNo data available.10. STABILITY AND REACTIVITY10.1 ReactivityNo data available.10.2 Chemical stabilityStable under recommended storage conditions.10.3 Possibility of hazardous reactionsNo data available.10.4 Conditions to avoidNo data available.10.5 Incompatible materialsStrong acids/alkalis, strong oxidising/reducing agents.10.6 Hazardous decomposition productsUnder fire conditions, may decompose and emit toxic fumes.Other decomposition products - no data available.11.TOXICOLOGICAL INFORMATION11.1 Information on toxicological effectsAcute toxicityClassified based on available data. For more details, see section 2Skin corrosion/irritationClassified based on available data. For more details, see section 2Serious eye damage/irritationClassified based on available data. For more details, see section 2Respiratory or skin sensitizationClassified based on available data. For more details, see section 2Germ cell mutagenicityClassified based on available data. For more details, see section 2CarcinogenicityIARC: No component of this product present at a level equal to or greater than 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.ACGIH: No component of this product present at a level equal to or greater than 0.1% is identified as a potential or confirmed carcinogen by ACGIH.NTP: No component of this product present at a level equal to or greater than 0.1% is identified as a anticipated or confirmed carcinogen by NTP.OSHA: No component of this product present at a level equal to or greater than 0.1% is identified as a potential or confirmed carcinogen by OSHA.Reproductive toxicityClassified based on available data. For more details, see section 2Specific target organ toxicity - single exposureClassified based on available data. For more details, see section 2Specific target organ toxicity - repeated exposureClassified based on available data. For more details, see section 2Aspiration hazardClassified based on available data. For more details, see section 212. ECOLOGICAL INFORMATION12.1 ToxicityNo data available.12.2 Persistence and degradabilityNo data available.12.3 Bioaccumlative potentialNo data available.12.4 Mobility in soilNo data available.12.5 Results of PBT and vPvB assessmentPBT/vPvB assessment unavailable as chemical safety assessment not required or not conducted.12.6 Other adverse effectsNo data available.13. DISPOSAL CONSIDERATIONS13.1 Waste treatment methodsProductDispose substance in accordance with prevailing country, federal, state and local regulations.Contaminated packagingConduct recycling or disposal in accordance with prevailing country, federal, state and local regulations.14. TRANSPORT INFORMATIONDOT (US)This substance is considered to be non-hazardous for transport.IMDGThis substance is considered to be non-hazardous for transport.IATAThis substance is considered to be non-hazardous for transport.15. REGULATORY INFORMATIONSARA 302 Components:No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.SARA 313 Components:This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.SARA 311/312 Hazards:No SARA Hazards.Massachusetts Right To Know Components:No components are subject to the Massachusetts Right to Know Act.Pennsylvania Right To Know Components:No components are subject to the Pennsylvania Right to Know Act.New Jersey Right To Know Components:No components are subject to the New Jersey Right to Know Act.California Prop. 65 Components:This product does not contain any chemicals known to State of California to cause cancer, birth defects, or anyother reproductive harm.16. OTHER INFORMATIONCopyright 2018 MedChemExpress. The above information is correct to the best of our present knowledge but does not purport to be all inclusive and should be used only as a guide. The product is for research use only and for experienced personnel. It must only be handled by suitably qualified experienced scientists in appropriately equipped and authorized facilities. The burden of safe use of this material rests entirely with the user. MedChemExpress disclaims all liability for any damage resulting from handling or from contact with this product.Caution: Product has not been fully validated for medical applications. For research use only.Tel: 609-228-6898 Fax: 609-228-5909 E-mail: tech@Address: 1 Deer Park Dr, Suite Q, Monmouth Junction, NJ 08852, USA。
AZD3965_SDS_MedChemExpress
Inhibitors, Agonists, Screening LibrariesSafety Data Sheet Revision Date:May-24-2017Print Date:May-24-20171. PRODUCT AND COMPANY IDENTIFICATION1.1 Product identifierProduct name :AZD3965Catalog No. :HY-12750CAS No. :1448671-31-51.2 Relevant identified uses of the substance or mixture and uses advised againstIdentified uses :Laboratory chemicals, manufacture of substances.1.3 Details of the supplier of the safety data sheetCompany:MedChemExpress USATel:609-228-6898Fax:609-228-5909E-mail:sales@1.4 Emergency telephone numberEmergency Phone #:609-228-68982. HAZARDS IDENTIFICATION2.1 Classification of the substance or mixtureGHS Classification in accordance with 29 CFR 1910 (OSHA HCS)Acute toxicity, Oral (Category 4),H302Acute aquatic toxicity (Category 1),H400Chronic aquatic toxicity (Category 1),H4102.2 GHS Label elements, including precautionary statementsPictogramSignal word No data availableHazard statement(s)H302 Harmful if swallowed.H410 Very toxic to aquatic life with long lasting effects.Precautionary statement(s)P264 Wash skin thoroughly after handling.P270 Do not eat, drink or smoke when using this product.P273 Avoid release to the environment.P301 + P312 IF SWALLOWED: Call a POISON CENTER or doctor/ physician if you feel unwell.P330 Rinse mouth.P391 Collect spillage.P501 Dispose of contents/ container to an approved waste disposal plant.2.3 Other hazardsNone.3. COMPOSITION/INFORMATION ON INGREDIENTS3.1 SubstancesSynonyms:AZD⁻3965Formula:C21H24F3N5O5SMolecular Weight:515.51CAS No. :1448671-31-54. FIRST AID MEASURES4.1 Description of first aid measuresEye contactRemove any contact lenses, locate eye-wash station, and flush eyes immediately with large amounts of water. Separate eyelids with fingers to ensure adequate flushing. Promptly call a physician.Skin contactRinse skin thoroughly with large amounts of water. Remove contaminated clothing and shoes and call a physician.InhalationImmediately relocate self or casualty to fresh air. If breathing is difficult, give cardiopulmonary resuscitation (CPR). Avoid mouth-to-mouth resuscitation.IngestionWash out mouth with water; Do NOT induce vomiting; call a physician.4.2 Most important symptoms and effects, both acute and delayedThe most important known symptoms and effects are described in the labelling (see section 2.2).4.3 Indication of any immediate medical attention and special treatment neededTreat symptomatically.5. FIRE FIGHTING MEASURES5.1 Extinguishing mediaSuitable extinguishing mediaUse water spray, dry chemical, foam, and carbon dioxide fire extinguisher.5.2 Special hazards arising from the substance or mixtureDuring combustion, may emit irritant fumes.5.3 Advice for firefightersWear self-contained breathing apparatus and protective clothing.6. ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency proceduresUse full personal protective equipment. Avoid breathing vapors, mist, dust or gas. Ensure adequate ventilation. Evacuate personnel to safe areas.Refer to protective measures listed in sections 8.6.2 Environmental precautionsTry to prevent further leakage or spillage. Keep the product away from drains or water courses.6.3 Methods and materials for containment and cleaning upAbsorb solutions with finely-powdered liquid-binding material (diatomite, universal binders); Decontaminate surfaces and equipment by scrubbing with alcohol; Dispose of contaminated material according to Section 13.7. HANDLING AND STORAGE7.1 Precautions for safe handlingAvoid inhalation, contact with eyes and skin. Avoid dust and aerosol formation. Use only in areas with appropriate exhaust ventilation.7.2 Conditions for safe storage, including any incompatibilitiesKeep container tightly sealed in cool, well-ventilated area. Keep away from direct sunlight and sources of ignition.Recommended storage temperature:Powder-20°C 3 years4°C 2 yearsIn solvent-80°C 6 months-20°C 1 monthShipping at room temperature if less than 2 weeks.7.3 Specific end use(s)No data available.8. EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parametersComponents with workplace control parametersThis product contains no substances with occupational exposure limit values.8.2 Exposure controlsEngineering controlsEnsure adequate ventilation. Provide accessible safety shower and eye wash station.Personal protective equipmentEye protection Safety goggles with side-shields.Hand protection Protective gloves.Skin and body protection Impervious clothing.Respiratory protection Suitable respirator.Environmental exposure controls Keep the product away from drains, water courses or the soil. Cleanspillages in a safe way as soon as possible.9. PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical propertiesAppearance White to off-white (Solid)Odor No data availableOdor threshold No data availablepH No data availableMelting/freezing point No data availableBoiling point/range No data availableFlash point No data availableEvaporation rate No data availableFlammability (solid, gas)No data availableUpper/lower flammability or explosive limits No data availableVapor pressure No data availableVapor density No data availableRelative density No data availableWater Solubility No data availablePartition coefficient No data availableAuto-ignition temperature No data availableDecomposition temperature No data availableViscosity No data availableExplosive properties No data availableOxidizing properties No data available9.2 Other safety informationNo data available.10. STABILITY AND REACTIVITY10.1 ReactivityNo data available.10.2 Chemical stabilityStable under recommended storage conditions.10.3 Possibility of hazardous reactionsNo data available.10.4 Conditions to avoidNo data available.10.5 Incompatible materialsStrong acids/alkalis, strong oxidising/reducing agents.10.6 Hazardous decomposition productsUnder fire conditions, may decompose and emit toxic fumes.Other decomposition products - no data available.11.TOXICOLOGICAL INFORMATION11.1 Information on toxicological effectsAcute toxicityClassified based on available data. For more details, see section 2Skin corrosion/irritationClassified based on available data. For more details, see section 2Serious eye damage/irritationClassified based on available data. For more details, see section 2Respiratory or skin sensitizationClassified based on available data. For more details, see section 2Germ cell mutagenicityClassified based on available data. For more details, see section 2CarcinogenicityIARC: No component of this product present at a level equal to or greater than 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.ACGIH: No component of this product present at a level equal to or greater than 0.1% is identified as a potential or confirmed carcinogen by ACGIH.NTP: No component of this product present at a level equal to or greater than 0.1% is identified as a anticipated or confirmed carcinogen by NTP.OSHA: No component of this product present at a level equal to or greater than 0.1% is identified as a potential or confirmed carcinogen by OSHA.Reproductive toxicityClassified based on available data. For more details, see section 2Specific target organ toxicity - single exposureClassified based on available data. For more details, see section 2Specific target organ toxicity - repeated exposureClassified based on available data. For more details, see section 2Aspiration hazardClassified based on available data. For more details, see section 212. ECOLOGICAL INFORMATION12.1 ToxicityNo data available.12.2 Persistence and degradabilityNo data available.12.3 Bioaccumlative potentialNo data available.12.4 Mobility in soilNo data available.12.5 Results of PBT and vPvB assessmentPBT/vPvB assessment unavailable as chemical safety assessment not required or not conducted.12.6 Other adverse effectsNo data available.13. DISPOSAL CONSIDERATIONS13.1 Waste treatment methodsProductDispose substance in accordance with prevailing country, federal, state and local regulations.Contaminated packagingConduct recycling or disposal in accordance with prevailing country, federal, state and local regulations.14. TRANSPORT INFORMATIONDOT (US)This substance is considered to be non-hazardous for transport.IMDGUN number: 3077Class: 9Packing group: IIIEMS-No: F-A, S-FProper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.Marine pollutant: Marine pollutant.IATAUN number: 3077Class: 9Packing group: IIIProper shipping name: Environmentally hazardous substance, solid, n.o.s.15. REGULATORY INFORMATIONSARA 302 Components:No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.SARA 313 Components:This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.SARA 311/312 Hazards:No SARA Hazards.Massachusetts Right To Know Components:No components are subject to the Massachusetts Right to Know Act.Pennsylvania Right To Know Components:No components are subject to the Pennsylvania Right to Know Act.New Jersey Right To Know Components:No components are subject to the New Jersey Right to Know Act.California Prop. 65 Components:This product does not contain any chemicals known to State of California to cause cancer, birth defects, or anyother reproductive harm.16. OTHER INFORMATIONCopyright 2017 MedChemExpress. The above information is correct to the best of our present knowledge but does not purport to be all inclusive and should be used only as a guide. The product is for research use only and for experienced personnel. It must only be handled by suitably qualified experienced scientists in appropriately equipped and authorized facilities. The burden of safe use of this material rests entirely with the user. MedChemExpress disclaims all liability for any damage resulting from handling or from contact with this product.Caution: Product has not been fully validated for medical applications. For research use only.Tel: 609-228-6898 Fax: 609-228-5909 E-mail: tech@Address: 1 Deer Park Dr, Suite Q, Monmouth Junction, NJ 08852, USA。
KU-55933_DataSheet_MedChemExpress
Inhibitors, Agonists, Screening Libraries Data SheetBIOLOGICAL ACTIVITY:KU–55933 is a potent ATM inhibitor with an IC 50 and K i of 12.9 and 2.2 nM, respectively, and highly selective for ATM as compared to DNA–PK, PI3K/PI4K, ATR and mTOR.IC50 & Target: IC50: 12.9 nM (ATM)In Vitro: KU–55933 (10 μM) blocks the ionizing radiation–induced p53 serine 15 phosphorylation. KU–55933 has a dose–dependent effect in inhibiting this ATM–dependent phosphorylation event with an estimated IC 50 of 300 nM. KU–55933 ablates the ionizing radiation–induced phosphorylation of these ATM substrates. KU–55933 specifically inhibits ATM but not the other DNAdamage–activated PIKKs, ATR, and DNA–PK [1]. KU–55933 induces pATM, p53, E2F1 and pATR, noticeably upregulates the nuclear fraction of E2F1 at the 0.5 h time point [2]. Metformin increases ATM and AMPK phosphorylation, as well as SHP protein level in primary hepatocytes, and this stimulatory effect of metformin is repressed by a specific ATM kinase inhibitor KU–55933[3].PROTOCOL (Extracted from published papers and Only for reference)Kinase Assay:[1]ATM for use in the in vitro assay is obtained by immunoprecipitation with rabbit polyclonal antiserum raised to the COOH–terminal 400 amino acids of ATM in buffer containing 25 mM HEPES (pH 7.4), 2 mM MgCl 2, 250 mM KCl, 500 μM EDTA,100 μM Na 3VO 4, 10% v/v glycerol, and 0.1% v/v Igepal. ATM–antibody complexes are isolated from nuclear extract byincubating with protein A–Sepharose beads for 1 hour and then through centrifugation to recover the beads. In the well of a 96–well plate, ATM–containing Sepharose beads are incubated with 1 μg of substrate glutathione S–transferase–p53N66(NH 2–terminal 66 amino acids of p53 fused to glutathione S–transferase) in ATM assay buffer [25 mM HEPES (pH 7.4), 75 mM NaCl, 3mM MgCl 2, 2 mM MnCl 2, 50 μM Na 3VO 4, 500 μM DTT, and 5% v/v glycerol] at 37°C in the presence or absence of inhibitor. After 10minutes with gentle shaking, ATP is added to a final concentration of 50 μM and the reaction continued at 37°C for an additional 1hour. The plate is centrifuged at 250×g for 10 minutes (4°C) to remove the ATM–containing beads, and the supernatant is removed and transferred to a white opaque 96–well plate and incubated at room temperature for 1.5 hours to allow glutathioneS–transferase–p53N66 binding. This plate is then washed with PBS, blotted dry, and analyzed by a standard ELISA technique with a phospho–serine 15 p53 antibody. The detection of phosphorylated glutathione S–transferase–p53N66 substrate is performed incombination with a goat antimouse horseradish peroxidase–conjugated secondary antibody. Enhanced chemiluminescence solutionis used to produce a signal and chemiluminescent detection is carried out via a TopCount plate reader.Cell Assay: KU–55933 is prepared as 10 mM stock solutions in DMSO.[1]1BR or AT4 cells are seeded in 10–cm Petri dishes and treated on day 2 (80 to 90% confluence). Cells are preincubated for 1 hour with KU–55933 or vehicle control and then exposed to 5 Gy of ionizing radiation. Time courses of cell cycle distribution are performed, and the optimal time for discrimination of populations is selected as 16 hours. All subsequent experiments are performed at the 16–hour time point. Cells are stained with propidium iodide according to standard protocols and analyzed by FACS with a FACScalibur. Exponentially growing (50–70% confluent) SW620 cells in 60 mm dishes are exposed to KU–55933 or DMSO for 1 h before addition of etoposide (final concentration of 0.1 and 1 μM) for 16 hProduct Name:KU–55933Cat. No.:HY-12016CAS No.:587871-26-9Molecular Formula:C 21H 17NO 3S 2Molecular Weight:395.49Target:ATM/ATR; ATM/ATR; Autophagy Pathway:Cell Cycle/DNA Damage; PI3K/Akt/mTOR; Autophagy Solubility:DMSO: 80 mg/mL (Need ultrasonic)before harvesting, propidium iodide staining and analysis as above.References:[1]. Hickson I, et al. Identification and characterization of a novel and specific inhibitor of the ataxia–telangiectasia mutated kinase ATM. Cancer Res. 2004 Dec 15;64(24):9152–9[2]. Khalil HS, et al. Pharmacological inhibition of ATM by KU55933 stimulates ATM transcription.Exp Biol Med (Maywood). 2012 Jun;237(6):622–34. Epub 2012 Jun 22.[3]. Kim YD, et al. Orphan nuclear receptor SHP negatively regulates growth hormone–mediated induction of hepatic gluconeogenesis through inhibition of STAT5 transactivation.J Biol Chem. 2012 Sep 12.Caution: Product has not been fully validated for medical applications. For research use only.Tel: 609-228-6898 Fax: 609-228-5909 E-mail: tech@Address: 1 Deer Park Dr, Suite Q, Monmouth Junction, NJ 08852, USA。
PD98059_DataSheet_MedChemExpress
Inhibitors, Agonists, Screening Libraries Data SheetBIOLOGICAL ACTIVITY:PD98059 is an MEK inhibitor with IC 50 of 5 μM, also suppresses TCDD binding to the aryl hydrocarbon receptor (AHR) with IC 50 of 4μM.IC50 & Target: IC50: 5 μM (MEK)[1]In Vitro: Concentrations of PD98059 of ≤20 μM are not cytotoxic to cultured MCF10A, MCF10A–Neo, and MCF10A–NeoT cells.However, PD98059 is weakly cytostatic to all three lines at concentrations of ≥10 μM. Treatment of MCF10A–Neo andMCF10A–NeoT cultures with concentrations of PD98059 up to 20 μM for 2–22 hr does not alter the total ERK content. However,treatment with PD98059 does result in concentration–dependent reductions in the dually phosphorylated forms of ERK1 and ERK2. Within 2 hr of a 10–μM treatment, phosphorylated ERK contents are reduced ~74% and ~86% in MCF10A–Neo and MCF10A–NeoT cultures, respectively (IC 50=1 μM). Within 22 hr of treatment, phosphorylated ERK forms are almost completely eliminated in both cell lines [1]. PD98059 (PD 098059) prevents the activation of MAPKK1 by Raf or MEK kinase in vitro atconcentrations (IC 50=2–7 μM). PD98059 inhibits both the activation and phosphorylation of MAPKK1 in vitro by either c–Raf or MEK kinase with IC 50 values of 4±2 μM. Incubation of Swiss 3T3 cells with PD98059 (50 μM) suppressed by 80–90% the activation of MAPKK induced by each agonist, but the activation of c–Raf is enhanced 2–3–fold [2].In Vivo: The treatment of mice with PD98059 significantly reduces the level of p–ERK1/2. Moreover, a significant increase in the phospho–p38 expression is observed in Zymosan–treated mice at 18 h after Zymosan administration compared to thesham–operated mice. The treatment with PD98059 significantly reduces the p38 expression [3]. Repeated treatment with PD98059attenuates mechanical allodynia measured by the von Frey test three (18.0 g±0.8, n=10) and seven (20.21 g±0.67, n=26) days after CCI in comparison to the vehicle–treated CCI–exposed rats (15.1 g±1.3, n=7 and 14.21 g±0.44, n=28, respectively). Repeated injection of PD98059 diminishes thermal hyperalgesia, as is evaluated by the cold plate test, three (17.5 s±2.1, n=10) and seven (25.54 s±1.03, n=26) days following CCI compared to vehicle–treated CCI–exposed rats (11.5 s±1.8, n=7 and 11.4 s±0.88, n=28,respectively)[4].PROTOCOL (Extracted from published papers and Only for reference)Kinase Assay:[1]Kinase reactions are performed in 50 μL reaction volumes and contain 50 mM Tris, pH 7.4, 10 mM MgCl 2, 2mM EGTA, 10 μM ATP (containing 1 μCi of 3000 Ci/mmol [γ–32P]ATP), 7.6 μg of GST–MEK1, 7.2 μg of GST–ERK1, and 20 μg of MBP.PD98059 and other flavonoids are added to the reactions mixtures immediately after the addition of GST–MEK1 but before the addition of GST–ERK1 and ATP. Control reactions contain ERK1 and MBP but no MEK. Reaction mixtures are incubated at 30°C for 15 min before being stopped by the addition of Laemmli’s SDS sample buffer. Proteins are separated on SDS–15% polyacrylamide gels. After vacuum drying of the gel, radioactivity is detected by autoradiography on X–ray film or phosphoimaging using a BioRad GS–525 Molecular Imager [1].Product Name:PD98059Cat. No.:HY-12028CAS No.:167869-21-8Molecular Formula:C 16H 13NO 3Molecular Weight:267.28Target:Autophagy; MEK Pathway:Autophagy; MAPK/ERK Pathway Solubility:DMSO: 16 mg/mL; H 2O: < 0.01 mg/mLCell Assay: PD98059 is dissolved in DMSO and stored, and then diluted with appropriate media (DMSO <0.1%) before use[1]. [1] The MCF10A, MCF10A–Neo, and MCF10A–NeoT cell lines are used. Subconfluent cultures are treated with PD98059 (0–100 μM). Viability of cells after treatment is assessed by ability to exclude trypan blue. Cultures earmarked for RNA isolation are washed twice with phosphate–buffered saline (2.7 mM KCl, 1.5 mM KH2PO4, 137 mM NaCl, 8 mM Na2HPO4, pH 7.2) at harvesting and stored at –80°C[1].Animal Administration: PD98059 is prepared in non–pyrogenic saline (0.9% NaCl) (Mice)[3].PD98059 is dissolved in 75% DMSO (Rat)[4].[3][4]Mice[3]Male CD mice (20–22 g) are randomly allocated into the following groups: 1. Zymosan+DMSO group. Mice are treated intraperitoneally (i.p.) with Zymosan (500 mg/kg, suspended in saline solution) and with the vehicle for PD98059 (10% DMSO, v/v) i.p.1 and 6 h after Zymosan administration (N=10). 2. PD98059 group. Identical to the Zymosan+DMSO group but are administered PD98059 (10 mg/kg, i.p. bolus) at 1 and 6 h after Zymosan (N=10) instead of DMSO. 3. Sham+DMSO group. Identical to the Zymosan+DMSO group but are administered saline solution instead of Zymosan (N=10). 4. Sham+PD98059 group. Identical to Sham+DMSO group, except for the administration of PD98059 (10 mg/kg i.p. bolus) 1 and 6 h after saline administration (N=10). Rat[4]The rats (male Wistar, 300–350 g) are used. The PD98059 (2.5 μg/5 μL, i.t.) is single or repeated preemptively administered 16 h and 1 h before CCI and then once daily for 7 days. The Vehicle–treated CCI–exposed rats receive 75% DMSO according to the same schedule. There is no significant difference in pain behavior between no–treated and V(DMSO)–treated CCI–exposed rats. This method of PD98059 or vehicle administration is used throughout the study and is referred to in the text as “repeated administration”. At day 7th after CCI 30 min after PD98059 administration tactile allodynia is measured using von Frey test and thermal hyperalgesia is conducted using cold plate test. Additionally, at day 7th after CCI the vehicle–treated and PD98059–treated rats receive a single i.t. vehicle, Morphine (2.5 μg/5 μL) or Buprenorphine (2.5 μg/5 μL) injection 30 min after PD98059, and then 30 min later the von Frey and/or cold plate tests are repeated. Since the dose of morphine 2.5 μg/5 μL in naive rats produces maximal analgesic effect in tail–flick test. Lower dose of Morphine are used for co–administration experiments, so that observing the possible enhancement of opioid effectiveness. The vehicle–treated and PD98059–treated naive rats (uninjured rats) receive a single i.t. vehicle, Morphine (0.5 μg/5 μL) or Buprenorphine (2.5 μg/5 μL) injection 30 min after PD98059, and then 30 min later the tail flick test is performed.References:[1]. Reiners JJ Jr, et al. PD98059 is an equipotent antagonist of the aryl hydrocarbon receptor and inhibitor of mitogen–activated protein kinase kinase. Mol Pharmacol. 1998 Mar;53(3):438–45.[2]. Alessi DR, et al. PD 098059 is a specific inhibitor of the activation of mitogen–activated protein kinase kinase in vitro and in vivo. J Biol Chem, 1995, 270(46), 27489–27494.[3]. Di Paola R, et al. PD98059, a specific MAP kinase inhibitor, attenuates multiple organ dysfunction syndrome/failure (MODS) induced by zymosan in mice. Pharmacol Res. 2010 Feb;61(2):175–87.[4]. Rojewska E, et al. PD98059 Influences Immune Factors and Enhances Opioid Analgesia in Model of Neuropathy. PLoS One. 2015 Oct 1;10(10):e0138583.Caution: Product has not been fully validated for medical applications. For research use only.Tel: 609-228-6898 Fax: 609-228-5909 E-mail: tech@Address: 1 Deer Park Dr, Suite Q, Monmouth Junction, NJ 08852, USA。
EL-102_SDS_MedChemExpress
Inhibitors, Agonists, Screening LibrariesSafety Data Sheet Revision Date:May-24-2017Print Date:May-24-20171. PRODUCT AND COMPANY IDENTIFICATION1.1 Product identifierProduct name :EL-102Catalog No. :HY-16187CAS No. :1233948-61-21.2 Relevant identified uses of the substance or mixture and uses advised againstIdentified uses :Laboratory chemicals, manufacture of substances.1.3 Details of the supplier of the safety data sheetCompany:MedChemExpress USATel:609-228-6898Fax:609-228-5909E-mail:sales@1.4 Emergency telephone numberEmergency Phone #:609-228-68982. HAZARDS IDENTIFICATION2.1 Classification of the substance or mixtureNot a hazardous substance or mixture.2.2 GHS Label elements, including precautionary statementsNot a hazardous substance or mixture.2.3 Other hazardsNone.3. COMPOSITION/INFORMATION ON INGREDIENTS3.1 SubstancesSynonyms:EL 102; EL102Formula:C19H16N2O3S2Molecular Weight:384.47CAS No. :1233948-61-24. FIRST AID MEASURES4.1 Description of first aid measuresEye contactRemove any contact lenses, locate eye-wash station, and flush eyes immediately with large amounts of water. Separate eyelids with fingers to ensure adequate flushing. Promptly call a physician.Skin contactRinse skin thoroughly with large amounts of water. Remove contaminated clothing and shoes and call a physician.InhalationImmediately relocate self or casualty to fresh air. If breathing is difficult, give cardiopulmonary resuscitation (CPR). Avoid mouth-to-mouth resuscitation.IngestionWash out mouth with water; Do NOT induce vomiting; call a physician.4.2 Most important symptoms and effects, both acute and delayedThe most important known symptoms and effects are described in the labelling (see section 2.2).4.3 Indication of any immediate medical attention and special treatment neededTreat symptomatically.5. FIRE FIGHTING MEASURES5.1 Extinguishing mediaSuitable extinguishing mediaUse water spray, dry chemical, foam, and carbon dioxide fire extinguisher.5.2 Special hazards arising from the substance or mixtureDuring combustion, may emit irritant fumes.5.3 Advice for firefightersWear self-contained breathing apparatus and protective clothing.6. ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency proceduresUse full personal protective equipment. Avoid breathing vapors, mist, dust or gas. Ensure adequate ventilation. Evacuate personnel to safe areas.Refer to protective measures listed in sections 8.6.2 Environmental precautionsTry to prevent further leakage or spillage. Keep the product away from drains or water courses.6.3 Methods and materials for containment and cleaning upAbsorb solutions with finely-powdered liquid-binding material (diatomite, universal binders); Decontaminate surfaces and equipment by scrubbing with alcohol; Dispose of contaminated material according to Section 13.7. HANDLING AND STORAGE7.1 Precautions for safe handlingAvoid inhalation, contact with eyes and skin. Avoid dust and aerosol formation. Use only in areas with appropriate exhaust ventilation.7.2 Conditions for safe storage, including any incompatibilitiesKeep container tightly sealed in cool, well-ventilated area. Keep away from direct sunlight and sources of ignition.Recommended storage temperature:Powder-20°C 3 years4°C 2 yearsIn solvent-80°C 6 months-20°C 1 monthShipping at room temperature if less than 2 weeks.7.3 Specific end use(s)No data available.8. EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parametersComponents with workplace control parametersThis product contains no substances with occupational exposure limit values.8.2 Exposure controlsEngineering controlsEnsure adequate ventilation. Provide accessible safety shower and eye wash station.Personal protective equipmentEye protection Safety goggles with side-shields.Hand protection Protective gloves.Skin and body protection Impervious clothing.Respiratory protection Suitable respirator.Environmental exposure controls Keep the product away from drains, water courses or the soil. Cleanspillages in a safe way as soon as possible.9. PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical propertiesAppearance Light yellow to yellow (Solid)Odor No data availableOdor threshold No data availablepH No data availableMelting/freezing point No data availableBoiling point/range No data availableFlash point No data availableEvaporation rate No data availableFlammability (solid, gas)No data availableUpper/lower flammability or explosive limits No data availableVapor pressure No data availableVapor density No data availableRelative density No data availableWater Solubility No data availablePartition coefficient No data availableAuto-ignition temperature No data availableDecomposition temperature No data availableViscosity No data availableExplosive properties No data availableOxidizing properties No data available9.2 Other safety informationNo data available.10. STABILITY AND REACTIVITY10.1 ReactivityNo data available.10.2 Chemical stabilityStable under recommended storage conditions.10.3 Possibility of hazardous reactionsNo data available.10.4 Conditions to avoidNo data available.10.5 Incompatible materialsStrong acids/alkalis, strong oxidising/reducing agents.10.6 Hazardous decomposition productsUnder fire conditions, may decompose and emit toxic fumes.Other decomposition products - no data available.11.TOXICOLOGICAL INFORMATION11.1 Information on toxicological effectsAcute toxicityClassified based on available data. For more details, see section 2Skin corrosion/irritationClassified based on available data. For more details, see section 2Serious eye damage/irritationClassified based on available data. For more details, see section 2Respiratory or skin sensitizationClassified based on available data. For more details, see section 2Germ cell mutagenicityClassified based on available data. For more details, see section 2CarcinogenicityIARC: No component of this product present at a level equal to or greater than 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.ACGIH: No component of this product present at a level equal to or greater than 0.1% is identified as a potential or confirmed carcinogen by ACGIH.NTP: No component of this product present at a level equal to or greater than 0.1% is identified as a anticipated or confirmed carcinogen by NTP.OSHA: No component of this product present at a level equal to or greater than 0.1% is identified as a potential or confirmed carcinogen by OSHA.Reproductive toxicityClassified based on available data. For more details, see section 2Specific target organ toxicity - single exposureClassified based on available data. For more details, see section 2Specific target organ toxicity - repeated exposureClassified based on available data. For more details, see section 2Aspiration hazardClassified based on available data. For more details, see section 212. ECOLOGICAL INFORMATION12.1 ToxicityNo data available.12.2 Persistence and degradabilityNo data available.12.3 Bioaccumlative potentialNo data available.12.4 Mobility in soilNo data available.12.5 Results of PBT and vPvB assessmentPBT/vPvB assessment unavailable as chemical safety assessment not required or not conducted.12.6 Other adverse effectsNo data available.13. DISPOSAL CONSIDERATIONS13.1 Waste treatment methodsProductDispose substance in accordance with prevailing country, federal, state and local regulations.Contaminated packagingConduct recycling or disposal in accordance with prevailing country, federal, state and local regulations.14. TRANSPORT INFORMATIONDOT (US)This substance is considered to be non-hazardous for transport.IMDGThis substance is considered to be non-hazardous for transport.IATAThis substance is considered to be non-hazardous for transport.15. REGULATORY INFORMATIONSARA 302 Components:No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.SARA 313 Components:This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.SARA 311/312 Hazards:No SARA Hazards.Massachusetts Right To Know Components:No components are subject to the Massachusetts Right to Know Act.Pennsylvania Right To Know Components:No components are subject to the Pennsylvania Right to Know Act.New Jersey Right To Know Components:No components are subject to the New Jersey Right to Know Act.California Prop. 65 Components:This product does not contain any chemicals known to State of California to cause cancer, birth defects, or anyother reproductive harm.16. OTHER INFORMATIONCopyright 2017 MedChemExpress. The above information is correct to the best of our present knowledge but does not purport to be all inclusive and should be used only as a guide. The product is for research use only and for experienced personnel. It must only be handled by suitably qualified experienced scientists in appropriately equipped and authorized facilities. The burden of safe use of this material rests entirely with the user. MedChemExpress disclaims all liability for any damage resulting from handling or from contact with this product.Caution: Product has not been fully validated for medical applications. For research use only.Tel: 609-228-6898 Fax: 609-228-5909 E-mail: tech@Address: 1 Deer Park Dr, Suite Q, Monmouth Junction, NJ 08852, USA。
SNS-032_SDS_MedChemExpress
Inhibitors, Agonists, Screening LibrariesSafety Data Sheet Revision Date:Jul.-25-2017Print Date:Jul.-25-20171. PRODUCT AND COMPANY IDENTIFICATION1.1 Product identifierProduct name :SNS-032Catalog No. :HY-10008CAS No. :345627-80-71.2 Relevant identified uses of the substance or mixture and uses advised againstIdentified uses :Laboratory chemicals, manufacture of substances.1.3 Details of the supplier of the safety data sheetCompany:MedChemExpress USATel:609-228-6898Fax:609-228-5909E-mail:sales@1.4 Emergency telephone numberEmergency Phone #:609-228-68982. HAZARDS IDENTIFICATION2.1 Classification of the substance or mixtureNot a hazardous substance or mixture.2.2 GHS Label elements, including precautionary statementsNot a hazardous substance or mixture.2.3 Other hazardsNone.3. COMPOSITION/INFORMATION ON INGREDIENTS3.1 SubstancesSynonyms:BMS–387032; SNS 032; SNS032; BMS 387032; BMS387032Formula:C17H24N4O2S2Molecular Weight:380.53CAS No. :345627-80-74. FIRST AID MEASURES4.1 Description of first aid measuresEye contactRemove any contact lenses, locate eye-wash station, and flush eyes immediately with large amounts of water. Separate eyelids with fingers to ensure adequate flushing. Promptly call a physician.Skin contactRinse skin thoroughly with large amounts of water. Remove contaminated clothing and shoes and call a physician.InhalationImmediately relocate self or casualty to fresh air. If breathing is difficult, give cardiopulmonary resuscitation (CPR). Avoid mouth-to-mouth resuscitation.IngestionWash out mouth with water; Do NOT induce vomiting; call a physician.4.2 Most important symptoms and effects, both acute and delayedThe most important known symptoms and effects are described in the labelling (see section 2.2).4.3 Indication of any immediate medical attention and special treatment neededTreat symptomatically.5. FIRE FIGHTING MEASURES5.1 Extinguishing mediaSuitable extinguishing mediaUse water spray, dry chemical, foam, and carbon dioxide fire extinguisher.5.2 Special hazards arising from the substance or mixtureDuring combustion, may emit irritant fumes.5.3 Advice for firefightersWear self-contained breathing apparatus and protective clothing.6. ACCIDENTAL RELEASE MEASURES6.1 Personal precautions, protective equipment and emergency proceduresUse full personal protective equipment. Avoid breathing vapors, mist, dust or gas. Ensure adequate ventilation. Evacuate personnel to safe areas.Refer to protective measures listed in sections 8.6.2 Environmental precautionsTry to prevent further leakage or spillage. Keep the product away from drains or water courses.6.3 Methods and materials for containment and cleaning upAbsorb solutions with finely-powdered liquid-binding material (diatomite, universal binders); Decontaminate surfaces and equipment by scrubbing with alcohol; Dispose of contaminated material according to Section 13.7. HANDLING AND STORAGE7.1 Precautions for safe handlingAvoid inhalation, contact with eyes and skin. Avoid dust and aerosol formation. Use only in areas with appropriate exhaust ventilation.7.2 Conditions for safe storage, including any incompatibilitiesKeep container tightly sealed in cool, well-ventilated area. Keep away from direct sunlight and sources of ignition.Recommended storage temperature:Powder-20°C 3 years4°C 2 yearsIn solvent-80°C 6 months-20°C 1 monthShipping at room temperature if less than 2 weeks.7.3 Specific end use(s)No data available.8. EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Control parametersComponents with workplace control parametersThis product contains no substances with occupational exposure limit values.8.2 Exposure controlsEngineering controlsEnsure adequate ventilation. Provide accessible safety shower and eye wash station.Personal protective equipmentEye protection Safety goggles with side-shields.Hand protection Protective gloves.Skin and body protection Impervious clothing.Respiratory protection Suitable respirator.Environmental exposure controls Keep the product away from drains, water courses or the soil. Cleanspillages in a safe way as soon as possible.9. PHYSICAL AND CHEMICAL PROPERTIES9.1 Information on basic physical and chemical propertiesAppearance White to khaki (Solid)Odor No data availableOdor threshold No data availablepH No data availableMelting/freezing point No data availableBoiling point/range No data availableFlash point No data availableEvaporation rate No data availableFlammability (solid, gas)No data availableUpper/lower flammability or explosive limits No data availableVapor pressure No data availableVapor density No data availableRelative density No data availableWater Solubility No data availablePartition coefficient No data availableAuto-ignition temperature No data availableDecomposition temperature No data availableViscosity No data availableExplosive properties No data availableOxidizing properties No data available9.2 Other safety informationNo data available.10. STABILITY AND REACTIVITY10.1 ReactivityNo data available.10.2 Chemical stabilityStable under recommended storage conditions.10.3 Possibility of hazardous reactionsNo data available.10.4 Conditions to avoidNo data available.10.5 Incompatible materialsStrong acids/alkalis, strong oxidising/reducing agents.10.6 Hazardous decomposition productsUnder fire conditions, may decompose and emit toxic fumes.Other decomposition products - no data available.11.TOXICOLOGICAL INFORMATION11.1 Information on toxicological effectsAcute toxicityClassified based on available data. For more details, see section 2Skin corrosion/irritationClassified based on available data. For more details, see section 2Serious eye damage/irritationClassified based on available data. For more details, see section 2Respiratory or skin sensitizationClassified based on available data. For more details, see section 2Germ cell mutagenicityClassified based on available data. For more details, see section 2CarcinogenicityIARC: No component of this product present at a level equal to or greater than 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.ACGIH: No component of this product present at a level equal to or greater than 0.1% is identified as a potential or confirmed carcinogen by ACGIH.NTP: No component of this product present at a level equal to or greater than 0.1% is identified as a anticipated or confirmed carcinogen by NTP.OSHA: No component of this product present at a level equal to or greater than 0.1% is identified as a potential or confirmed carcinogen by OSHA.Reproductive toxicityClassified based on available data. For more details, see section 2Specific target organ toxicity - single exposureClassified based on available data. For more details, see section 2Specific target organ toxicity - repeated exposureClassified based on available data. For more details, see section 2Aspiration hazardClassified based on available data. For more details, see section 2Additional informationRTECS No.: TM6071000This information is based on our current knowledge. However the chemical, physical, and toxicological properties have not been completely investigated.12. ECOLOGICAL INFORMATION12.1 ToxicityNo data available.12.2 Persistence and degradabilityNo data available.12.3 Bioaccumlative potentialNo data available.12.4 Mobility in soilNo data available.12.5 Results of PBT and vPvB assessmentPBT/vPvB assessment unavailable as chemical safety assessment not required or not conducted.12.6 Other adverse effectsNo data available.13. DISPOSAL CONSIDERATIONS13.1 Waste treatment methodsProductDispose substance in accordance with prevailing country, federal, state and local regulations.Contaminated packagingConduct recycling or disposal in accordance with prevailing country, federal, state and local regulations.14. TRANSPORT INFORMATIONDOT (US)This substance is considered to be non-hazardous for transport.IMDGThis substance is considered to be non-hazardous for transport.IATAThis substance is considered to be non-hazardous for transport.15. REGULATORY INFORMATIONSARA 302 Components:No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.SARA 313 Components:This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.SARA 311/312 Hazards:No SARA Hazards.Massachusetts Right To Know Components:No components are subject to the Massachusetts Right to Know Act.Pennsylvania Right To Know Components:No components are subject to the Pennsylvania Right to Know Act.New Jersey Right To Know Components:No components are subject to the New Jersey Right to Know Act.California Prop. 65 Components:This product does not contain any chemicals known to State of California to cause cancer, birth defects, or anyother reproductive harm.16. OTHER INFORMATIONCopyright 2017 MedChemExpress. The above information is correct to the best of our present knowledge but does not purport to be all inclusive and should be used only as a guide. The product is for research use only and for experienced personnel. It must only be handled by suitably qualified experienced scientists in appropriately equipped and authorized facilities. The burden of safe use of this material rests entirely with the user. MedChemExpress disclaims all liability for any damage resulting from handling orfrom contact with this product.Caution: Product has not been fully validated for medical applications. For research use only.Tel: 609-228-6898 Fax: 609-228-5909 E-mail: tech@Address: 1 Deer Park Dr, Suite Q, Monmouth Junction, NJ 08852, USA。
美国Medchemexpress化合物库(小分子库)_Medchemexpress_(MCE中国)
美国Medchemexpress化合物库（小分子库）-原装进口，现货供
应，提供组合定制服务
品牌：Medchemexpress （MCE）
保存条件：-20℃
供应商：MCE中国
数量：大量
保质期：2年
Size：
Pre-dissolved DMSO/Solid（Or dry solid）
100 uL/well (10 mM solution)
200 uL/well (10 mM solution)
MedChemExpress (MCE)专注于各种抑制剂、调节剂、API、天然产物及化合物库，总部位于美国新泽西。
MCE经过十年努力已成为全球生物活性小分子领域的一流供应商。
MedChemExpress(MCE)产品涵盖近20个热门研究领域，1000多个细分靶点，超过3000个现货抑制剂、拮抗剂和激动剂。
相关的应用成果已发表于Nature、Cell等国际知名杂志，在全球20余个国家地区设有代理机构。
上海皓元生物医药科技有限公司(MCE 中国) 是MedChemExpress (MCE) 亚洲总代理。
MCE化合物库涵盖20余种不同的类型，超过2500个化合物，进口原装，
现货供应，提供详实的生物活性信息、化学结构信息、质控图谱（NMR和HPLC 等）。
还可根据您的实际研究需要，为您度身定制任意组合、规格、布板的特殊化合物库。
/screening-libraries.html
现有特色化合物库有：。
ZM-447439_LCMS_09660_MedChemExpress
=====================================================================Acq. Operator : Li Shan(LCMS-02) Seq. Line : 38Acq. Instrument : HY-LCMS-02 Location : Vial 35Injection Date : 3/18/2015 12:03:03 PM Inj : 1Inj Volume : 3.000 µlAcq. Method : D:\AGLIENT 1260\DATA\20150318\20150318 2015-03-18 08-53-52\100-1000MS+3MIN- 1.5_(0.02%FA).MLast changed : 3/18/2015 8:53:52 AM by Li Shan(LCMS-02)Analysis Method : D:\AGLIENT 1260\METHOD\100-1000MS+-3MIN_1.5(N@P).M Last changed : 3/18/2015 2:28:49 PM by Li Shan(LCMS-02) (modified after loading)Method Info : Negtive,Positive,MS:100-1000,Column ID:A-RP-85,50℃Catalo No : HY-10128 Batch#09660 A-RP-123Additional Info : Peak(s) manually integratedmin0.511.52 2.53mAU 020040060080010001200 DAD1 C, Sig=254,4 Ref=off (D:\AGLIENT...0\DATA\20150318\20150318 2015-03-18 08-53-52\CPK2015-318-09660.D)1.4391.6021.7081.9822.1262.403===================================================================== Area Percent Report =====================================================================Sorted By : Signal Multiplier : 1.0000Dilution : 1.0000Do not use Multiplier & Dilution Factor with ISTDsSignal 1: DAD1 C, Sig=254,4 Ref=offPeak RetTime Type Width Area Height Area # [min] [min] [mAU*s] [mAU] %----|-------|----|-------|----------|----------|--------| 1 1.439 MM 0.0502 4511.73242 1496.47607 98.8761 2 1.602 MM 0.0422 33.13781 13.08111 0.7262 3 1.708 MM 0.0398 6.12941 2.56546 0.1343 4 1.982 MM 0.0465 5.08477 1.82367 0.1114 5 2.126 MM 0.0440 3.35481 1.27047 0.0735 6 2.403 MM 0.0548 3.57526 1.08731 0.0784Totals : 4563.01448 1516.30409===================================================================== *** End of Report ***============================================================Acq. Operator : Li Shan(LCMS-02) Seq. Line : 38Acq. Instrument : HY-LCMS-02 Location : Vial 35Injection Date : 3/18/2015 12:03:03 PM Inj : 1Inj Volume : 3.000 µlAcq. Method : D:\AGLIENT 1260\DATA\20150318\20150318 2015-03-18 08-53-52\100-1000MS+3MIN- 1.5_(0.02%FA).MLast changed : 3/18/2015 8:53:52 AM by Li Shan(LCMS-02)Analysis Method : D:\AGLIENT 1260\METHOD\100-1000MS+-3MIN_1.5(N@P).M Last changed : 3/18/2015 2:30:07 PM by Li Shan(LCMS-02) (modified after loading)Method Info : Negtive,Positive,MS:100-1000,Column ID:A-RP-85,50℃Catalo No : HY-10128 Batch#09660 A-RP-123Additional Info : Peak(s) manually integratedmin0.511.522.53100000200000300000400000500000600000700000 MSD1 TIC, MS File (D:\AGLIENT 1260\DATA\20150318\20150318 2015-03-18 08-53-52\CPK2015-318-09660.D) ES-API, Pos, Sc1.443MS Signal: MSD1 TIC, MS File, ES-API, Pos, Scan, Frag: 50 Spectra averaged over upper half of peaks. Noise Cutoff: 1000 counts.Reportable Ion Abundance: > 10%.Retention Mol. Weight Time (MS) MS Area or Ion1.443 3858988 514.90 I 513.90 I 257.50 Im/z10020030040050020406080100*MSD1 SPC, time=1.416:1.471 of D:\AGLIENT 1260\DATA\20150318\20150318 2015-03-18 08-53-52\CPK2015-318-09660.D ES-API Max: 451152514.9513.9 257.5*** End of Report ***。