触控玻璃规格 IR46-85_SPEC
Light Vision 清晰视界系列眼镜说明书
Light Vision ™11356-00000-10Clear AF Lens, Grey Frame,Dual LED LightsSolus ™ 1000S1101SGAFClear Scotchgard ™ AF Lens,Blue/Black Frame S1102SGAFGrey Scotchgard ™ AF Lens,Blue/Black Frame S1103SGAFAmber Scotchgard ™ AF Lens,Blue/Black Frame S1107SGAF Indoor/Outdoor Grey Scotchgard ™ AF LensBlue/Black Frame S1101SGAF-KTClear Scotchgard ™ AF Lens,Blue/Black Frame, Foam Gasket and StrapS1102SGAF-KTGrey Scotchgard ™ AF Lens,Blue/Black Frame, Foam Gasket and StrapS1107SGAF-KTIndoor/Outdoor Grey Scotchgard ™AF Lens, Blue/Black Frame, Foam Gasket and StrapS1201SGAFClear Scotchgard ™ AF Lens,Green/Black FrameS1202SGAFGrey Scotchgard ™ AF Lens,Green/Black FrameS1203SGAFAmber Scotchgard ™ AF Lens,Green/Black FrameS1207SGAF Indoor/Outdoor Grey Scotchgard ™ AF LensGreen/Black Frame S1201SGAF-KTClear Scotchgard ™ AF Lens,Green/Black Frame, Foam Gasket and StrapS1202SGAF-KTGrey Scotchgard ™ AF Lens,Green/Black Frame, Foam Gasket and Strap S1201SGAF-SKTClear Scotchgard ™ AF Lens, Green/Black Frame, Foam Gasket and Strap (temples not included)S1202SGAF-SKTGrey Scotchgard ™ AF Lens, Green/Black Frame, Foam Gasket and Strap (temples not included)S1207SGAF-SKTIndoor/Outdoor Grey Scotchgard ™ AF Lens, Green/Black Frame, Foam Gasketand Strap (temples not included)Solus-foamSolus Accessories Foam GasketSolus-strapSolus Accessories StrapSmart Lens ™13407-00000-5Photochromic Lens, Black FramePREMIUM PROTECTIVE EYEWEARThese eye or face protection products help provide limited eye and face protection. Misuse or failure to follow warning and instruction may result in serious potential injury, including blindness or death. For proper use, selection, and applications against flying particles, optical radiation and/or splash, see supervisor, read User Instructions and warning on the package or call 3M PSD Technical Service in the USA at 1-800-243-4630. In Canada, call 1-800-267-4414.WARNING!3Personal Safety Division 3M CenterBuilding 235-2W-70St. Paul, MN 55144-1000For more information:In U.S.Technical Assistance 1-800-243-4630 Customer Care Center 1-800-328-1667/WorkerSafety In CanadaTechnical Assistance 1-800-267-4414 Customer Care 1-800-364-35773M.ca/Safety3M PSD products are occupational use only.3M and all other trademarks used herein are trademarks of 3M Company, used under license in Canada. Please recycle. Printed in U.S.A. © 3M 2018. All rights reserved. 70-0715-6919-1Rev. 01/201811476-00000-10Clear AF Lens, Grey Frame,Dual LED LightsLight Vision ™ 2Fuel ™11640-00000-10Red Mirror Lens, Metallic Sand Frame11641-00000-20Blue Mirror Lens, Silver Frame11664-00000-10Blue HC Mirror Lens, White Frame11650-0000-10Red Mirror Lens, Metallic Sand Frame11654-00000-10Grey AF Lens, Black Rubberized FrameSecureFit ™ 600Safety SunwearSS1330AS-GYellow Mirror AS Lens, Grey FrameSS1428AS-SBlue Mirror AS Lens, Silver Alum FrameSS1502AF-BGrey AF Lens, Black Frame w/GasketSS1502AF-WGrey AF Lens, White Frame w/GasketSS1514AS-SSilver Mirror AS Lens, Silver Black Frame w/GasketSS1511AF-BGrey Polarize AF Lens, Black Frame w/GasketSS1514AS-BSilver Mirror AS Lens, Black/Grey Frame w/GasketSS1629AS-BRed Mirror AS Lens, Black FrameSF601SGAFClear Scotchgard ™ AF LensSF601SGAF-FMClear Scotchgard ™ AF Lens, Foam GasketSF602SGAFGrey Scotchgard ™ AF LensSF602SGAF-FMGrey Scotchgard ™ AF Lens, Foam GasketSF603SGAFAmber Scotchgard ™ AF LensSF607SGAFIndoor/Outdoor Grey Scotchgard ™ AF LensSF601RASClear Rugged Anti-Scratch LensSF602RASGrey Rugged Anti-Scratch LensSF617ASLow IR R1.7, AS LensSF630ASShade W3.0, AS LensSF650AS W5, AS Lens SF611ASPolarized, AS LensSF613ASPhotochromic, AS LensLight Vision ™ OTG11489-00000-10Clear AF Lens, Dual LED Lights, OTG16617-00000-10Clear Lens, Black Frame w/Strap, Medium16618-00000-10Clear Lens, Black Frame w/Strap, LargeLexa ™Dust GoggleGear™Lexa ™ Splash GoggleGear ™16644-00000-10 Clear Lens, Medium, D3 D416645-00000-10 Clear Lens, Large, D3 D416400-00000-10Clear Lens, Elastic Strap, Medium16408-00000-10Clear Lens, Black Adjustable Temple,Medium16412-00000-10Clear Lens, Elastic Strap, Large16420-00000-10Clear Lens, Black Adjustable Temple,LargeFectoggles ™40300-00000-10Clear Lens, Impact Goggle40301-00000-10Clear AF Lens, Impact Goggle40304-00000-10Clear Lens, Splash Goggle, D3 D440305-00000-10Clear AF Lens, Splash Goggle, D3 D4Centurion ™Maxim ™ 2x2 Goggle40686-00000-10Clear Lens, Black Frame w/Strap, Temples40687-00000-10Grey Lens, Black Frame w/Strap, Temples40696-00000-10Clear Lens, Black Frame, Side Venting40698-00000Clear AF Lens, Black Strap, Air Flow Goggle40699-00000Grey AF Lens, Black Strap, Air Flow Goggle332 Impact Goggle40650-00000-10Clear Lens 40651-00000-10 Clear AF Lens334 Splash Goggle40660-00000-10 Clear Lens, D3 D440661-00000-10 Clear AF Lens, D3 D4GoggleGear ™ 500GG501SGAFClear Scotchgard ™ AF Lens, D3 D4,Cloth Strap GG501NSGAFClear Scotchgard ™ AF Lens, D3 D4,Neoprene Strap GG500-PI Prescription InsertGG500-NeoStrapReplacementNeoprene Strap GG500-ClthStrap Replacement Cloth StrapSAFETY GOGGLESACCESSORIESMaxim ™ Splash GoggleModul-R ™40671-00000-10Clear AF Lens, O-T-G, D3 D440658-00000-10Clear AF Lens, Chin ProtectorThe Complete Line of Protective Eyewear Products11215-00000-20 Grey AF Lens, Black Frame11216-00000-20I/O Mirror Lens, Black FrameMoon Dawg ™11532-10000-20Clear AF Lens, Blue Frame11554-00000-20Clear AF Lens, Bronze Frame11555-00000-20Bronze AF Lens, Bronze Frame11556-00000-20Blue Mirror HC Lens, Bronze FrameMetaliks ™ GTHIE6 Protective EyewearAttaches directly to 3M ™ Hard Hat SuspensionHIE601AF - Clear AF Lens HIE602AF - Amber AF Lens HIE603AF - Grey AF Lens3M ™ Protective Eyewear Slip-On Side Shields23451-00030-20 ClearReplacement Foam GasketSF-FOAM (SF400)SF600FI (SF600)GoggleGear ™ 2890 SeriesGG2891-SGAFClear Scotchgard ™ AF Lens,Indirect Vent3M ™ Lens Cleaner83803-00000Lens Cleaning Fluid 83745-00000Lens Cleaning T owelettesQX Privo 12261-00000-20Clear AF Lens, Black/Orange Frame12262-00000-20Grey AF Lens, Black/Orange Frame12263-00000-20Amber AF Lens, Black/Orange Frame12264-00000-20I/O Mirror Lens, Black/Orange Frame12265-00000-20Clear AF Lens, Silver/Red Frame12266-00000-20SF401SGAF-REDClear Scotchgard Anti-Fog LensRed/Gray Frame SF401SGAF-BLUClear Scotchgard Anti-Fog LensBlue/Gray Frame SF401SGAF-BLU-FClear Scotchgard Anti-Fog Lens with FoamGasket, Blue/Gray Frame SF402SGAF-BLU12100-10000-20 Clear Lens, Black Temple12101-10000-20Grey Lens, Black Temple 12109-10000-20Clear Lens, Black Temple, Soft Nose12110-10000-20Grey Lens, Black Temple, Soft Nose12115-10000-20Clear Lens, Black Sport Grip Temple, Soft Nose12180-10000-2011380-00000-20 Clear AF Lens, Silver Frame11381-00000-20Grey AF Lens, Silver Frame11471-00000-20Clear AF Lens, Blue Frame11472-00000-20I/O Mirror Lens, Blue Frame11523-00000-20Light Blue AF Lens, Blue Frame11477-00000-10Clear AF Lens, Grey Frame, +1.5 Diopter11478-00000-10Clear AF Lens, Grey Frame, +2.0 Diopter11479-00000-10Clear AF Lens, Grey Frame, +2.5 Diopter11374-00000-20Clear Lens, Silver Frame, +1.5 Diopter11375-00000-20Clear Lens, Silver Frame, +2.0 Diopter11376-00000-20Clear Lens, Silver Frame, +2.5 Diopter11377-00000-20Grey Lens, Silver Frame, +1.5 Diopter11378-00000-2011457-00000-10Clear AF Lens, Silver Frame, Dual +1.5 Diopter11458-00000-10Clear AF Lens, Silver Frame, Dual +2.0 Diopter11459-00000-10Clear AF Lens, Silver Frame, Dual +2.5 DiopterBX ReadersMetaliks Sport11343-10000-20Clear AF Lens, Brushed Nickel Frame11344-10000-20Grey AF Lens, Brushed Nickel Frame11345-10000-20I/O Mirror HC Lens, Brushed Nickel Frame11540-10000-20Blue Mirror HC Lens, Brushed Nickel FrameLexa ™15100-00000-20Clear AF Lens, Black Temple, Large15200-00000-20Clear AF Lens, Black Temple, Medium15154-00000-100Clear AF Lens, Black Temple, Large15204-00000-20Grey AF Lens, Black Temple, Medium15152-00000-100Clear AF Lens, Black Temple, Medium14246-00000-20Clear AF Lens, Metallic Grey/Black Frame14247-00000-20Grey AF Lens, Metallic Grey/Black Frame14248-00000-20 I/O Mirror Lens, Metallic Grey/Black FrameSF401AF Clear AF Lens SF402AF Grey AF Lens SF410ASIndoor/Outdoor Mirror LensSF401AF-FM Clear AF Lens, Foam SF402AF-FM Grey AF Lens, Foam SF410AS-FMSecureFit 400OX。
mt4720工控触摸瓶技术参数
mt4720工控触摸瓶技术参数摘要：一、MT4720工控触摸屏概述1.屏幕尺寸与分辨率2.显示比例与亮度3.对比度、响应时间与视角二、触摸技术及操作系统的配置1.触摸技术类型2.触摸点数与操作系统的支持三、接口与电源配置1.接口类型与数量2.电源参数与功耗四、环境适应性与尺寸重量1.工作温度与存储温度2.湿度适应性3.尺寸与重量正文：一、MT4720工控触摸屏概述MT4720工控触摸屏是一款拥有47英寸大屏幕的工控设备，其分辨率达到1920x1080，呈现16:9的显示比例。
屏幕亮度为500cd/㎡，对比度为1000:1，响应时间为5ms。
从不同角度观看，其视角可达178°。
这款触摸屏采用红外触摸技术，支持10点触摸操作。
此外，它还兼容Windows和Android操作系统，方便用户根据需求进行选择。
二、触摸技术及操作系统的配置MT4720工控触摸屏采用红外触摸技术，可以实现高速、精确的触摸操作。
屏幕支持10点触摸，让用户在操作过程中更加便捷。
在操作系统方面，MT4720支持Windows和Android两种操作系统，满足不同用户的需求。
三、接口与电源配置MT4720工控触摸屏提供了丰富的接口配置，包括HDMI、VGA和USB 等，方便用户连接各种外部设备。
在电源方面，这款触摸屏采用AC 100-240V，50/60Hz的电源输入，功耗为≤200W。
四、环境适应性与尺寸重量MT4720工控触摸屏具有良好的环境适应性，可以在0-40℃的工作温度下正常运行，存储温度范围为-20-60℃。
此外，设备可以在10%-90%RH的湿度环境中正常工作，无冷凝现象。
触摸屏规格书215寸
触摸屏规格承认书Analog Touch panel Specification 品名/Product Name：电容式触摸屏模组机种名/Product Number：HKCZ-21.5CTP-023客户名称/ CUSTOMER NAME：客户确认/CUSTOMER APPROVE：日期/APPROVE DATE:客户签核核准审核确认承制方签核核准审核确认目录目录 (2)适用范围 (3)变更记录 (3)1.产品规格 (5)1.1 产品尺寸 (5)1.2 产品结构 (5)1.3 产品参数 (5)1.4 产品功耗 (6)1.5 产品使用、保存环境 (6)2.可靠性标准规范 (6)3.结构图纸 (7)6.注意事项 (8)深圳华科创智技术有限公司 2 / 8适用范围本规格书为明确规范本公司产品触控面板性能而订定，当本规格书与其它个别规格书内容有抵触情况发生时，仍以本规格书标准为最优先。
本规格书内容如有项目不足或内容需变更时，须经由会议讨论后另订之。
This specification defines performance of input surfaces for our transparent analog touch panels. In the event of a conflict between this specification and applicable individual specification, this specification takes precedence. Items missing from this specification are to be decided subject to discussion.变更记录日期版本描述变更人员2016.6.25 V1.0 初版吴小雄1.产品规格1.1 产品尺寸项目内容单位触摸尺寸21.5 inch视窗比例16:9 NA外形尺寸514.64*310.51 mmSensor外形489.57*289.08 mm可视区476.64*268.11 mm1.2 产品结构项目内容单位玻璃厚度 3 mm玻璃倒角R4.0 mmOCA厚度（上线）0.125 mm纳米银导电膜厚度（上线）0.125 mmOCA厚度（下线）0.05 mm纳米银导电膜厚度（下线）0.125 mm1.3 产品参数项目内容单位表面硬度7H H透过率＞84% %线性度Pitch 6.0mm mm最大支持点数10点NA支持最大分辨率1920*1080Dots NA接口种类USB NA运行系统Android NA1.4 产品功耗项目内容单位振荡频率12 MHZ电源5V V反应时间≦10 ms1.5 产品使用、保存环境项目内容备注使用温度范围湿度20%-90%，非结雾单体状态下以上条件不代表环境试验规状态-10℃-60℃格保存温度范围湿度20%-90%，非结雾单体状态下以上条件不代表环境试验规状态-20℃-70℃格2.可靠性标准规范项目测试条件判定高温存储试验80℃，240h，试验后常温静置2h检查产品功能正常高温高湿试验60℃、90%RH，240h，试验后静置2h检产品功能正常查冷热冲击试验温度-30℃/+70℃，60分钟/循环，试验产品功能正常3.结构图纸6.注意事项1.汗水或油脂等若附着于纳米银线层上，将会影响纳米银线层表面阻抗质特性，故勿在未戴手套下直接触摸表面。
亿佰特E28-2G4M27S 产品规格书说明书
E28-2G4M27S产品规格书SX1280 2.4GHz 500mW SPI 高速LoRa模块目录第一章产品概述 (2)1.1 产品简介 (2)1.2 特点功能 (2)1.3 应用场景 (2)第二章规格参数 (3)2.1 极限参数 (3)2.2 工作参数 (3)第三章机械尺寸与引脚定义 (4)第四章基本操作 (5)4.1硬件设计 (5)4.2软件编写 (5)第五章基本应用 (6)5.1 基本电路 (6)第六章常见问题 (7)6.1 传输距离不理想 (7)6.2 模块易损坏 (7)6.3 误码率太高 (7)第七章焊接作业指导 (8)7.1 回流焊温度 (8)7.2 回流焊曲线图 (8)第八章相关型号 (9)第九章天线指南 (9)9.1 天线推荐 (9)9.2天线选择 (9)修订历史 (10)关于我们 (11)第一章产品概述1.1 产品简介E28-2G4M27S是亿佰特公司设计生产的2.4GHz射频收发模块，发射功率500mW，SPI接口，具有极低的低功耗模式流耗；该模块为小体积贴片型(引脚间距1.27mm)，自带高性能PCB板载天线，采用52MHz工业级高精度低温漂晶振，保证其工业特性和其稳定性能。
采用Semtech公司的SX1280射频芯片，此芯片包含多样的物理层以及多种调制方式，如LoRa、FLRC、GFSK，并可兼容蓝牙协议；特殊的调制和处理方式使得LoRa和FLRC调制的传输距离有显著提升，在原有基础上内置了功率放大器（PA）与低噪声放大器（LNA），使得最大发射功率达到500mW的同时接收灵敏度也获得进一步的提升，在整体的通信稳定性上较没有功率放大器与低噪声放大器的产品大幅度提升；出色的低功耗性能、片上DC-DC和Time-of-flight使得此芯片功功能强大，可用于智能家居、安全系统、定位追踪、无线测距、穿戴设备、智能手环与健康管理等等。
SX1280支持RSSI，用户可以根据需要实现深度的二次开发，亦集成飞行时间(Time of flight)，适用于测距功能。
SLATE 10英寸彩色触屏显示R8001K1010说明书
SLA TE™10” Color Touch Screen Display R8001K1010INSTALLATION INSTRUCTIONSScan for more informationApplicationSLATE™ brings configurable safety and programmable logic together into one single platform. The platform can easilybe customized for almost any requirement or application–offering virtually limitless development opportunities with far less complexity.The R8001K1010 SLATE 10” Color Touch Screen Display provides users with the ability to create vivid application displays using web technology. The screen is web enabled and with the SLATE Web Editor tool creating screens is simple and easy.Features• Display screens are web pages served from SLATE Base Module• Integrated view of SLATE system• Standard Honeywell pages for Burner Control, Fuel Air Ratio, Limit and Base modulesSLATE™10” COLOR TOUCH SCREEN DISPLAY3 R8001K1010SpecificationsElectrical Ratings:Voltage and Frequency: 24 VAC, 50/60Hz; 24AC/DCEnvironmental RatingsAmbient Temperature:Operating: 32° F to 158° F (0° C to 70° C)Shipping: -40° F to 158° F (-40° C to 70° C)Humidity: 95% continuous, noncondensing.Dimensions: See Fig. 1.Weight: 4 lb 5 oz (1.5 Kg)Panel MountingThe display can be mounted through a cutout in the panel door, using four #4 thread-forming Plastite screws. See Fig. 3.For standard panel thicknesses of 0.060”–0.090” Honeywell recommends screw length of 3/8”. See Fig. 2 for hole spacing.Required ComponentsR8001A1001 SLATE Base ControllerPower Plug RecommendationsThe SLATE 10 inch color touch screen display will notcome with a power plug connector. The following are recommendations for the power connection. See Fig. 4 for plug locations.• 24VAC Wall Plug-in Transformer(Input Voltage: 120VAC, 60HZ – Output Voltage: 24VAC±5%). Honeywell p/n 32006131 or equivalent.• 18AWG wire• Plug-in connectors (or equivalent) NOT INCLUDED:–Phoenix - p/n 1757019–EBY Electro - p/n EB1508-02-500–Dinkle – p/n 2ESDV-02P–Molex – p/n 03953000024 32-00095—03SLATE ™ 10” COLOR TOUCH SCREEN DISPLAY 5R8001K1010Fig. 1.3/4Dimensions in in. (mm).Fig. 2. Mounting dimensions of color touch screen display in in. (mm).Fig. 3. Panel mounting of color touch screen display.Fig. 4. Touch screen display inputs.Note:SD card slot for future display firmware updates. Principal Technical FeaturesThe R8001K1010 color touch screen display provides a web-based user interface for viewing system status, and viewing, creating, or modifying configurations. Communications and NetworkingThe R8001K1010 color touch screen display interfaces directly with the SLATE system using a standard Ethernet connection, and can connect directly to the Base module or via an Ethernet switch.The R8001K1010 color touch screen display locates all base modules on an IP subnet using a subnet broadcast message, and once located allows users to select one to initiate a connection to that SLATE system.User Interface and TechnologyThe R8001K1010 color touch screen display is based on the Google Chrome™ browser and supports HTML5.A double tap on any web screen activates the Home, Back, and Help buttons, URL address bar, plus other controlsthat are normally hidden from view. Double tapping again deactivates these controls.6 32-00095—03InstallationWARNINGFire or Explosion Hazard Can cause severe injury,death, or property damage.Verification of safety requirements must be performedeach time a control is installed on a burner to preventpossible hazardous burner operation.When Installing This Product1. Read these instructions carefully. Failure to follow themcould damage the product or cause a hazardous condition.2. Check the ratings given in the instructions and on theproduct to make sure the product is suitable for yourapplication.WARNINGElectrical Shock Hazard.Can cause severe injury, death or equipment damage.1. Disconnect the power supply before beginning installationto prevent electrical shock and equipment damage. More than one power supply disconnect can be involved.2. Wiring must comply with all applicable codes, ordinancesand regulations.SLATE™10” COLOR TOUCH SCREEN DISPLAY7 R8001K1010Honeywell Process SolutionsHoneywell Thermal Solutions (HTS)1250 West Sam Houston ParkwaySouth Houston, TX 77042ThermalSolutions.honeywell ® U.S. Registered Trademark. © 2018 Honeywell International Inc. 32-00095—03 M.S. 05-18 Printed in U.S.A.For more information and detailed instructions on the SLATEdisplay please refer to the SLATE User Guide document located on our website at /SLATE32-00095-03IMPORTANT1. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with these instructions, may cause interference for radio communications. It has been tested and found to comply with the limits of a ClassA computing device of part 15 of FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area may cause interference; in which case, the user, at their own expense, may be required to take whatever measures are required to correct this interference.2. This digital apparatus does not exceed the Class A limits for radio noise, set out in the Radio Interference Regulations of the Canadian Department of Communications.WARNINGElectrical Shock Hazard. Can cause severe injury, death or equipment damage.Disconnect the power supply from the main disconnectbefore beginning installation to prevent electrical shockand equipment damage. More than one disconnect can be required.。
智能触摸芯片 CPT2610 数据手册说明书
CHIPHOMER TECHNOLOGY (SHANGHAI) LIMITEDCPT2610 数据手册单/双通道电容性触摸检测芯片September 2019目录CPT2610 数据手册 (1)目录 (2)图目录 (3)1概述 (4)2引脚 (5)2.1引脚排列 (5)2.2引脚说明 (6)3典型应用 (7)3.1双通道典型应用图 (7)3.2单通道典型应用图 (7)4功能描述 (8)4.1按键状态 (8)4.1.1按键输出有效电平选择 (8)4.1.2CPT2610SP8、CPT2610DN8 按键状态获取 (8)4.1.3CPT2610ST6、CPT2610DN6 按键状态获取 (8)4.2按键扫描模式 (8)4.3长时按键触发解除功能 (8)5电气特性 (9)6封装 (10)6.1SOP8L (10)6.2DFN2X2-8L (11)6.3SOT23-6L (12)6.4DFN1.6X1.6-6L (13)7订货信息 (14)8版本信息 (15)图目录图1CPT2610 SOP8L 引脚排列图 (5)图2CPT2610 SOT23-6L引脚排列图 (5)图3CPT2610 DFN1.6X1.6-6L引脚排列图 (5)图4CPT2610 DFN2X2-8L引脚排列图 (5)图5双通道触摸典型应用图 (7)图6单通道触摸典型应用图 (7)图7SOP8L封装尺寸图 (10)图8DFN2X2-8L封装尺寸图 (11)图9SOT23-6L封装尺寸图 (12)图10DFN1.6X1.6-6L封装尺寸图 (13)1 概述CPT2610是一款低功耗双通道/单通道电容检测芯片，具有高效的RF噪音抑制功能，能够准确识别手指触摸引起的微小电容变化，适用于用触摸按键替代机械按键等应用场合；具有实时的自校准和基线跟踪算法，能有效避免因环境因素变化而引起按键误触等情况；支持输出有效电平选择，以满足不同系统平台及应用的要求。
SAFeasy 光线传感器系列产品说明书
SE2-hAND SERIESThe SAFeasy TM light curtains, according to the Iec 61496-1 e Iec 61496-2 standards, are suitable for hand protection of operators exposed to risks.Different models with eleven standard heights ranging from 150 to 1650 mm, 35 mm resolution and an operating distance reaching 15 m are available. specific dip-switches, that can be reached through a slot present on the front of the receiver protected by a lid and opened with a simple screwdriver, guarantee rapid and safe device setting. the operator is thus able to configure, according to the specific needs, the manual or automatic restart, as well as the muting and partial muting functions. the emitter-receiver units are optically synchronised and contain all the control circuits, inputs and outputs inside the housing.The SAFeasy TM light curtains have also integrated the test function, automatically activated every second, without stopping the machine’s working cycle.a wide range of industrial applications, requiring operator safety, can be solved by the SAFeasy TM light curtains, thanks to the extremely compact dimensions (35x40 mm) and easy connection and installation.SAFeTY LIGHT CURTAINSHAND PROTeCTIONSAFeTYPower supply: 24 vdc ± 20% (seLv/PeLv)Consumption:70 ma max. / 2.1 w (emitter)100 ma max. / 3 w (receiver without load)Light emission: infrared Led 880 nmOptic diameter:Ø 16 mm Number of controlled beams:refer to table 1Optic interaxis: refer to table 2Resolution:refer to table 21st beam installation height: refer to table 3Through beam operating distance:0.5 ... 25 m (Q vers.)4 ... 50 m (P vers.)Receiver inputs:external switches for muting, test, restart andoverrideReceiver indicators:green / red safe / break Led2 yellow aLIgnment Ledsgreen Power on Led emitter indicators:yellow blinking faILure Led green Power on Led Output type: 2 PnP Output current:0.7 a max.0.25 a max. (45°c - 55°c)short-circuit signalling and protectionResponse time:14 msSelectable functions:total / partial muting manual / automatic restartrefer to table 4Time-out period:muting: 10 minutes override: 2 minutesMuting signalling lamp:24 v3 w min. (125 ma), 7 w max. (300 ma)Receiver connection: 8-pole m12 connector emitter connection:4-pole m12 connectorCable length: 50 m max. (with 50 nf capacitive load)Safety category:type 4electrical protection: class 1Mechanical protection: IP65IP67 (connector part)Housing material:aluminium with Pc makrolon plastic capsWeight:1.2 kg max. / m of total heightOperating temperature: -10 ... +55 °c Storage temperature:-25 ... +70 °cReference standards:en 954-1, Iec 61496-1, Iec 61496-2Table 4: DIP-SWITCh SELECTIONTable 1: NUMBER OF BEAMSTable 2: CONTROLLED hEIGhT (mm)Table 3: RESPONSE TIME (ms)GReY dip-switches: total / partial muting selection WHITedip-switches: manual / auto. restart selectionDIMeNSIONSRX: M12 8-POLE CONNECTORTX: M12 4-POLE CONNECTORversIons L 1 L 2 se2-35-015-PP-w 256147se2-35-030-PP-w 403294se2-35-045-PP-w 550441PL (ref. en Iso 13849-1)d cat (ref. en 954-1)2sIL (ref. en Iec 61508)2sIL cL (ref. en Iec 62061)2Pfhd – Probability of danger failure (1/h)1,37e-08t1 – Life time (years)20mttfd - mean time to danger failure (years)309dc – diagnostic coverage (%)96,3%sff – safe failure fraction (%)97,83%hft – hardware fault tolerancencthe company endeavours to continuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo variations without prior notice. for correct installation and use, the company can guarantee only the data indicated in the instruction manual supplied with the products.ACCeSSORY SeLeCTION AND ORDeR INFORMATIONPlease refer also to Safety Device Accessories。
Agilent EZChrom Elite 高级报告参考
本文档中提及的硬件和/或软件以 许可权的方式提供，其使用或复 制必须遵守许可。
有限权利声明
如果在履行美国政府某项重要合 同或转包合同时要使用此软件， 将以以下方式提供并授权软件： DFAR 252.227-7014（1995 年 6 月） 定义的“商业计算机软件”； FAR2.101 (a) 定 义 的 “ 商 业 项 目”；FAR 52.227-19（1987 年 6 月）或任何同等机构规定或合同 条款定义的“受限计算机软 件”。软件的使用、复制或公开 必须遵守安捷伦科技有限公司的 标准商业许可条款的规定，美国 政府的任何非 DOD 部门和机构 所 拥 有 的 权 利 不 得 超 出 FAR 52.227-19(c)(1-2)（1987 年 6 月） 中定义的“有限权利”的范围。 美国政府用户拥有的权利不得超 出 FAR 52.227-14（1987 年 6 月） 或 DFAR 252.227-7015 (b)(2)（1995 年 11 月 ） 中 定 义 的 “ 有 限 权 利”的范围（适用于所有技术数 据）。
2 简介 .................................................................................................... 13
3 教程 #1 – 创建序列摘要报告..................................................... 15 步骤 1：（创建新报告模板） ....................................................................16 步骤 2：（创建报告页眉和页脚）...........................................................16 步骤 3：（创建页眉） ..................................................................................18 步骤 4：（创建摘要表） .............................................................................20 步骤 5：（创建数据图表）.........................................................................24 步骤 6：（保存模板） ..................................................................................26 步骤 7：（创建再处理序列） ....................................................................26 步骤 8：（查看报告） ..................................................................................28 步骤 9：（向报告添加新统计）................................................................29
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
5VDC供电、USB/RS232接口大尺寸防暴红外触摸系统
技术规格书（46-85）
一、触摸功能
1.1、输入方式：手指、戴手套手指、铁笔、签字笔/铅笔、信用卡或指甲；
1.2、分辨率：4096*4096；
1.3、物理分辨率：3mm；
1.4、定位精度：小于±3mm；
1.5、最小触摸体直径：不小于6mm；
1.6、有效触摸高度：小于6mm；
1.7、响应时间：16ms；
1.8、适用显示器：LCD、CRT、PDP、背投；
二、机械特性
46英寸～85英寸触摸屏（无玻璃）：
型号红外屏尺
寸外形宽度
（max）
外形高度
（max）
可视区宽
度（min）
可视区高
度（min）
厚度
（max）
备注
46（16:9）1092 648 1020 576 12
52（16:9）1224 720 1152 648 12
60（16:9）1404 822 1332 750 12
63（4:3）1470 858 1398 786 12
70（4:3）1494 1140 1422 1068 12
70（16:9）1626 948 1554 876 12
75(16:9)
1734 1008 1662 936 12 80(16:9)
1842 1068 1770 996 12 85(16:9)
1956 1128 1884 1056 12
46英寸～85英寸触摸屏电源适配器外形尺寸: 96mm( L ) 44×mm( W ) 28×mm( H )； 46英寸～85英寸触摸屏电源适配器接口：
AC 输入线
DC 输出线 线长1800mm
线径18AWG*2C
DC输出插头 5.5×2.1×10.5 –0.5
+0.5
三、触摸面玻璃特性
46英寸～85英寸触摸屏触摸面玻璃要求(普通玻璃)：
特性参数误差单位备注
厚度4-6 +/-0.3 mm
透射率90% min
硬度 6 min
Mohs
抗暴性表面光滑钢球（质量约500g），1.3m高度自由落下，
测试样品完好 (4mm厚度) ；
表面光滑钢球（质量约1040g），1m高度自由落下，
测试样品完好 (6mm厚度) ；
参考：EuropTec EagleEtch glass
46英寸～85英寸触摸屏触摸面玻璃要求(防眩玻璃)：
特性参数误差单位备注
厚度2-3 +/-0.3 mm
透射率89% min
反射率5% max
表面粗糙0.8 max microns
分辨率4.2 max Lines/mm
色彩Clear 无色班
防眩度85 min EG European Gloss units
Mohs
硬度 6 min
表面抛光度Etched Chemically etched both sides
参考：EuropTec EagleEtch glass
四、触摸电气特性
46英寸～85英寸触摸屏电气参数
特性参数单位备注
工作电压5.0+/-0.25 VDC 输入电源电压
输入电源电压噪声有效值
电压噪声200 mVrms
功率2.0-3.0（max）W 触摸方式下
唤醒模式 12.5（max）mW USB 挂起
五、46英寸～85英寸触摸屏电源适配器电气特性
1.1、输入电压范围 100Vac 到240Vac；
1.2、输入频率范围 47Hz到63Hz；
1.3、最大输入电流 1A (100Vac ,负载3.0A)
浪涌电流小于 30A (100Vac ,25℃)；
1.4、效率(输出功率/输入功率) 大于70％(100Vac ,负载3.0A)；
1.5、输出电压和负载
电压（DC） 最小负载 额定负载
5V 0A 3A
1.6、空载输出电压
电压/电流 范围
5V/0A 5.0～5.5V
1.7、纹波和噪声
电压 纹波和噪声（Vp-p）
5V/3A <150mV
注：测试方法：输出端应并上10uF和0.1uF 电容
输入电压：100-240Vac、 负载 2A
1.8、短路保护: 输出端短路时,电源自动保护,电压电流趋于零，去除短路，电源自动恢复；
1.9、抗电强度：输入对输出: 3000VAC/60s,漏电流＜10mA，（典型测试）；
2.0、绝缘强度： 输入对输出:≥20MΩ at 500VDC.
2.1、电磁兼容：EMI，该电源辐射和传导符合国际EN55022标准；
六、应用环境
红外触摸屏（控制器/触摸屏集成）应用环境满足
特性参数单位备注
日光免疫3000 m 海拔高度环境
工作温度0-60 ℃
工作湿度8-80 % 在T=27℃
存储温度-10-70 ℃
存储湿度5-80 % 在T=27℃
海拔0-3000 m
V3
Class Operating Vibration 0.27 grms C-S-1-9711-002, Operating Shock 25 mmdrop C-S-1-9711-007, Class S3
七、可靠性
红外触摸屏（控制器/触摸屏集成）可靠性满足
特性参数单位备注
使用寿命43,800 POH 大于 7 年
每周7天，每天24小时计
每月开机时间720 hours
每月开/关机次数30 cysles
每天1个循环
hrs
MTBF 500
K
Max ARR(over 1st 3 years) 1.7 % Annual Replacement Rate
ESD （空气环境）12 kV
ESD （接触环境）8 kV
八、Safety/EMC
红外触摸屏（控制器/触摸屏集成）Safety/EMC满足
目录标准
External Safety UL 60950,3rd Edition
IEC 60950/EN60950,2nd Edition with Amendments1,2,3 and 4 with all country deviations Electro-Static
Discharge(ESD)
EN 55024: 1998+A1: 2001&A2: 2003(EN 61000-4-2, Criteria B)
Electromagnetic interference(EMI) FCC Part 15 Class B
CISPR 22 Radiated Class A, Conducted Class B (EN55022:2006) 注: 3dB 冗余值
Radiated
Electromagnetic
Suscetibility(RES)
EN 50024: 1998+A1:2001&A2: 2003(EN61000-4-3, Criteria A)-Bands 1,2,6,7
ESD 测试等级(集成到显示器环境)
Test European
EN61000-4-2
Contact Discharge 330 ohm Pointed probe tip +/-4 KV
50 discharges/point To metal sides
Air Discharge 330 ohm Pointed probe tip +/-8 KV
10single discharges/point
Horizontal/Vertical Coupling Planes Indirect Contact Pointed probe tip +/-4 KV
50 discharges/side To coupling planes
九、Environmental and RoHS Compliance
红外触摸屏（控制器/触摸屏集成）满足Environmental and RoHS Compliance
十、驱动
10.1、支持windows驱动(XP,WEPOS,Vista)
10.2、支持DOS驱动(PC-DOS 2000)
10.3、支持Linux驱动(NLPOS 9,SLES 10,SLES 11 and their future SSPs and SPs)
十一、包装
匹配公司产品；
十二、安装方式
12.1、屏体安装方式
下面为简易安装示意图（固定屏体的挂件需客户根据显示器实际情况自行准备或由我公司定制）
D ouble T
CON -12.1、系统安装方式
红外触摸屏的背面和侧面已预留有安装孔，用户可以根据自己的意愿和方法将红外触摸屏固定在显示器屏幕前面，然后用红外触摸屏—PC 通讯连接线将其连接到PC 主机上；。