VASD2-S5-D5-SIP中文资料
VASD1-S5-D5-DIP中文资料
DESCRIPTION: DC/DC converterPART NUMBER: VASD1-DIP series features·isolated 1 W output·temperature range: -40°C~+85°C ·unregulated·high efficiency to 80%·dual voltage output ·small footprint ·DIP package style·industry standard pinout ·UL94-V0 package ·no heatsink required ·1K Vdc isolation·power density 0.85 W/cm³·no external component required ·low costmodelinput voltage output output current package numbernominal range voltage max.min.efficiencystyle UL60950-1VASD1-S5-D5-DIP 5 Vdc 4.5~5.5 Vdc ±5 Vdc ±100 mA ±10 mA 72%DIP YES VASD1-S5-D9-DIP 5 Vdc 4.5~5.5 Vdc ±9 Vdc ±56 mA ±6 mA 75%DIP YES VASD1-S5-D12-DIP 5 Vdc 4.5~5.5 Vdc ±12 Vdc ±42 mA ±5 mA 78%DIP YESVASD1-S5-D15-DIP 5 Vdc 4.5~5.5 Vdc ±15 Vdc ±33 mA ±4 mA 79%DIP YES VASD1-S12-D5-DIP12 Vdc 10.8~13.2 Vdc ±5 Vdc ±100 mA ±10 mA 74%DIP YES VASD1-S12-D9-DIP 12 Vdc 10.8~13.2 Vdc ±9 Vdc ±56 mA ±6 mA 76%DIP YES VASD1-S12-D12-DIP 12 Vdc 10.8~13.2 Vdc ±12 Vdc ±42 mA ±5 mA 79%DIP YES VASD1-S12-D15-DIP 12 Vdc 10.8~13.2 Vdc ±15 Vdc ±33 mA ±4 mA 80%DIP YES VASD1-S15-D5-DIP 15 Vdc 13.5~16.5 Vdc ±5 Vdc ±100 mA ±10 mA 74%DIP NO VASD1-S15-D9-DIP 15 Vdc 13.5~16.5 Vdc ±9 Vdc ±56 mA ±6A 75%DIP NO VASD1-S15-D12-DIP 15 Vdc 13.5~16.5 Vdc ±12 Vdc ±42 mA ±5 mA 79%DIP NO VASD1-S15-D15-DIP 15 Vdc 13.5~16.5 Vdc ±15 Vdc ±33 mA ±4 mA 79%DIP NO VASD1-S24-D5-DIP 24 Vdc 21.6~26.4 Vdc ±5 Vdc ±100 mA ±10 mA 74%DIP YES VASD1-S24-D9-DIP 24 Vdc 21.6~26.4 Vdc ±9 Vdc ±56 mA ±6 mA 76%DIP YES VASD1-S24-D12-DIP 24 Vdc 21.6~26.4 Vdc ±12 Vdc ±42 mA ±5 mA 80%DIP YES VASD1-S24-D15-DIP24 Vdc21.6~26.4 Vdc±15 Vdc±33 mA±4 mA81%DIPYESdescriptionDesigned to convert fixed volt-ages into an isolated voltage, the VASD1-DIP series is well suited for providing board-mount local supplies in a wide range of appli-cations, including mixedanalog/digital circuits, test &measurement equip.,process/machine controls, data-com/telecom fields, etc...The semi-regulated output can be followed by 3-terminal regulators to provide output protection, in addition to output regulation.NOTE:1. All specifications measured at TA=25°C, humidity <75%, nominal input voltage and rated output load unless otherwise specified.DESCRIPTION: DC/DC converterPART NUMBER:VASD1-DIP seriesDIMENSIONS (mm) TYPICAL CHARACTERISTICSDESCRIPTION: DC/DC converterPART NUMBER: VASD1-DIP seriesTABLE 2。
直流电度表
苏州迅鹏仪器仪表有限公司
ＳＰＡ系列直流电能表
概述
ＳＰＡ系列直流电能表是我公司自主研制的产品。它是针对直流屏、太阳能光伏、蓄电池、电镀、通信电源、直流电动工具等应用 场合设计的。直流电能表包含（直流电流表、直流电压表、安培小时计、电压小时计、直流功率表、直流电能表）。
特点
精度：≤±0.1％RO
累积显示安培小时值０－９９９９９Ａｈ，输出带继电器来控制加药时间，电源是ＡＣ２２０Ｖ。
苏州迅鹏仪器仪表有限公司
ห้องสมุดไป่ตู้.s
接线图
Output +
Bottom
7
8
Aux. power
ur
7(/ )$;
po
n. co
m
累积显示电能值０－９９９９９ＫＷｈ，输出带ＲＳ４８５通讯，电源是ＡＣ２２０Ｖ。 Model:SPA-96BDAH-A75-HL-A1 Input:0~2000Adc/0~75mVdc Display:0~99999Ah Output: 继电器
Power:AC220V 描述：此产品为安培小时计，输入直流电流０－２０００Ａｄｃ通过分流器２０００Ａｄｃ／７５ｍＶ接入仪表。
（包含直流电流表、直流电压表、直流功率表、直流电能表……）
7(/
n. co
m
)$;
ＳＰＡ系列直流电能表
外形尺寸
48
96
8
100
12
45
93
Relay1
COM NC NO
Relay2
COM NC NO
9 10 11 12 13 14 15 16
测量：直流电流、直流电压、 安培小时、直流功率、直流电能等 显示： 直流电流、直流电压、 输出： 继电器报警输出、通讯ＲＳ４８５、模拟量信号４－２０ｍＡ、０－１０Ｖｄｃ、０－５Ｖｄｃ等
Smart V 2AD 多功能采集卡技术手册V1708
II
武汉亚为电子科技有限公司
说明
பைடு நூலகம்
SmartV2AD 产品技术手册
1、产品正常工作必须使用亚为提供的专用 SDK。 2、此手册为硬件说明书，有关通信协议、二次开发和软件应用方面的详细说明请参考我 司相应资料。 3、资料下载： 4、请严格按产品技术手册操作。
6. 应用实例..........................................................................................................................................................14 采集卡连接........................................................................................................................................... 14 发现硬件............................................................................................................................................... 14 软件功能............................................................................................................................................... 15 软件应用............................................................................................................................................... 16 LabVIEW.......................................................................................................................................16 其它................................................................................................................................................16
DVBS2机顶盒华曦达DV7204S2参数
DVB-S2 机顶盒华曦达 DV7204-S2 参数••••CPUARM 双核 GPUMali-400 MP 系统内存 DDR3 512MB Flash 存储 MLC 4GB操作系统类别数字电视网络电视 Android4.2远程电视，安卓智能播放盒，安卓网络播放盒，安卓媒体播放盒完全支持高清DVB-S2/DVB-S 标准,支持 7 天电子节目指南，支持 USB 录制、时移、节目回放、预约播放 免费收看来自世界各地的高品质的流媒体网络电视直本地媒体播放 外接存储系统升级 安卓应用丰富 可以播放全部多媒体格式，如音频、视频和图片USB 存储，32GB 的 TF 卡可用 USB 或网络来升级软件Facebook, YouTube, Skype,等等〔可选〕 MPEG-1/2/4 ASP, DivX 3/4/5/6, XviD,格式 H.264(1920x1080p @ 30fps), HD VC-1, RM/RMVB,Real Video8/9/10,VP6〔可选〕视频 *.mkv, *.ts, *.m2ts, *.tp, *.mov, *.mp4, *.rm, 封装*.rmvb, *.avi, *.mpg, *.mpeg, *.dat, *.vob, *.flv, *.asf播节目 可用安卓/iOS 手机和平板或PC 通过局域网或广域收看 远程电视 本机的电视节目，支持远程掌握，远程EPG ，远程录制 等 功能特 手机掌握 安卓和 iOS 手机可变身为本机遥控 色 多屏互动 支持 DLNA,Airplay,TVCast,Miracast 协议 网络流媒体 HTML5 or RTSP video and auduio playing解析度720p, 1080i, 1080p, 画面比例 4:3/16:9音频图片网络高频头格式封装格式以太网Wi-Fi3G数字电视标准频率范围灵敏度输入阻抗天线遥控延长线MPEG 1/2/2.5, Audio Layer 1/2/3, WMA Version4, 4.1, 7, 8, 9, WMA Pro, PCM, Vorbis, Flac,ALAC, APE, AAC-LC, AAC-HE, AC-3, DTS, Real Audio〔可选〕*.mp3, *.wma, *.wav, *.ogg, *.flac, *.mkajpeg, bmp, pngRJ45 接口 10M/100M 自适应内置 Wi-Fi 2.4G/5G 802.11a/b/g/n〔可选〕支持 3G/4G USB 无线网卡〔可选〕完全支持 DVB-S/DVB-S2 标准950∽2150 MHZ灵敏度-65∽-25dBm75Ω天线输入接口 F 头可接入红外遥延长线接口复合音视频 3.5mm 复合音视频输出HDMI HDMI1.4接口数字音频S/P DIF 光纤接口以太网RJ45CA 卡CA 卡接口TF 卡USB TF 卡接口USB 2.0 两个LED LED 指示灯一个电源电源适配器接口输入电压直流 12V/1A功耗最大 10W其他工作温度0～40℃产品尺寸132mm*100mm*30mm附件遥控器、电池、电源适配器、用户手册、1 分 3AV 线、HDMI 线〔可选〕。
阿杜步步高维修总结
KD01 此机在冷机开机就会死机，机心，光头没有一点动作。电压也都有，没有进出仓控制 电压。但接上电源，热机一会儿就正常了，那位大侠有高招 是 7208 坏 检查一下进出仓的到位开关,最好是代换一个试试
我查了是解压板上的ＡＳＴＢ那条线路不对，一取消就不会了．
今日维修一台 SD135，故障为不开仓.不读碟，机器偶尔可开仓，但是不关仓，手动关仓后 不读碟，主要表现为机芯光头无任何动作。 开机时仔细观察电视显示画面，发现读碟时有“开仓”字符，并且偶尔伴有紫色彩斑覆盖读碟 时的字样。证明 IC7327 没有工作，或者软体 SD135-1B 损坏。测量伺服供电正常，检查 IC7327 的供电外围元件也正常，说明问题在软体部分电路了。代换软体 SD135-1B 后故障排除。维 修这台机器看来还是根据平时积累的经验来完成的，如果不多观察肯定会走很大的弯路。
AV213 开机自动保护(永久缺料)维修一例 经检测是 STK402 厚膜内引脚脱焊(此 IC 又是永久缺料,按规定代替机工厂成本大,麻烦且用 户不满意).可把 STK402 厚膜内引脚全部拿掉.用导线把 STK402 厚膜内引脚点一一连上(有点 麻烦,但能解决问题).焊好后确定无连焊虚焊可打点白胶在内(不要太多,以不过 IC 的槽为准. 要不 IC 不好固定).此机开机自动保护多为这两 IC 内引脚脱焊.焊接好后即可正常使用 .成本 低又能实质性解决问题.
这台机器是天津送修北京的一台坏机 ,其故障是播放任何碟片其声音像牛在嚎 (用牛嚎来形 容真的不夸张),且图像与声音还不同步.交给我之前 PCB 板上该换和不该换的 IC 都换了.当然 我也就不用考虑什么 IC 了,最开始我还没有注意到图像和声音不同步 ,也走了不少弯路,总是 围绕在音频输出部分查 ,直到发现不同步后 ,我就联想到声图处理公共部分的问题 ,大家都知 道这款机器采用的是 MT1389FE-C 版,大部分电路在 IC 内部完成,外围也只有时钟和 SDRAM 与 MT1389FE-C 之间数据时钟可以查,我也一一查了(方法:对比其它机器借助示波器查),没有 发现任何异常 .哎!说到这里,这台机器我已修了一天多了 ,我本想放弃 ,最后售后有位同仁说 : 你查过电源没 ?我当时还反驳了他 (因为这是修机起码步骤 ,肯定查过),此时我在看图册时发
SmartAVI SDX-2P产品说明书
3. Connect a USB source (computer) to the USB port on the SDX-TX2P.
Pins 1 & 2 Pins 3 & 6 Pins 4 & 5 Pins 7 & 8
Connectors: RJ-45
Capacitance:
14 pf/ft (46.2 pf/m)
Conductor Gauge:
24 AWG
Impedance:
100 +/- 15 ohms
What’s in the Box?
PART NO.
QTY DESCRIPTION
SDX-TX2P
1 Dual DVI-D , USB 1.1, Dual RS232 , Audio, CAT5/5e/6 Transmitter
SDX-RX2P
1 Dual DVI-D , USB 1.1, Dual RS232 , Audio, CAT5/5e/6 Receiver
SDX-TX2P Front
SDX-TX2P Back
SDX-RX2P Front
SDX-RX2P Back
The following is the wiring standard for terminating UTP/STP cable using RJ-45 connector:
Pair 1 Pair 2 Pair 3 Pair 4
SmartAVI, Inc. / Twitter: smartavi 11651 Vanowen St. North Hollywood, CA 91605
拉维顿SDX光纤适配器板说明书
Page 1 of 2APPLICATIONLeviton SDX Fiber Adapter Plates are used in conjunction with SDX panels or enclosures (rack- or wall-mount) to provide a means to connect backbone to backbone orbackbone to horizontal fiber cabling. The SDX Fiber Adapter Plates are offered in LC, SC, and ST versions.Opt-X ® SDX Fiber Adapter Plates — Precision Molded5F100-xxx (precision molded)PRODUCT SPECIFICATIONS 5F100-xxx (precision molded)SPECIFICATIONThe SDX adapter plate shall be modular and functional for use in an SDX panel or enclosure (rack- or wall-mount). The adapter plate shall be offered in LC, SC, and ST styles in 6, 12, or 24 fiber configurations. The adapter plate shall be compliant to ANSI/TIA-568.3-D (for performance) and respective ANSI/TIA-604-X (for intermateability) standards. Adapter plates shall use zirconia ceramic sleeves and be offered in standard fiber type colors pursuant to ANSI/TIA-568.3-D standards. The adapter and plate shall be integrated to eliminate “rattle” and loose fit. Adapter plates shall be TAA compliant.FEATURES• I ntegrated LC and SC plates (two pieces) eliminates rattling and loose fit • A dapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds • LC and SC plates offered in standard fiber type colors • Adapter plates offered in LC, SC, ST, and blank styles • Captive push-lock pins allow for quick tool-less installation • Compatible with all SDX panels and enclosures (rack- or wall-mount)DESIGN CONSIDERATIONS• A rrange adapter plates within panel or enclosure to allow for future growth• Colored plate or fiber adapters will identify fiber type used • Visible sequential numbering to identify ports (for Tx & Rv)• 4RU rack-mount enclosure accommodates up to 15 adapter plates for highest density per RU • Z irconia ceramic sleeve typically used on laser optimized multimode and single-mode applications (OM3, OM4, OM4+, OS2)• Dust plugs or caps are installed in adapters on final assemblySTANDARDS COMPLIANCE• Meets ANSI/TIA-568.3-D for performance requirements • Meets ANSI/TIA-604-2B (ST), -3B (SC), -10C (LC) for connector intermateabilityPHYSICAL SPECIFICATIONSMaterials: A dapter plate: constructed of engineeredpolymer, various pantone colorsCOUNTRY OF ORIGINUnited States (LC, SC, blank plates) Taiwan (ST plates)WARRANTY INFORMATIONFor a copy of Leviton product warranties, visit /warranty5F100-6VC5F100-6QC5F100-6EC 5F100-2IC 5F100-2LC 5F100-2VL5F100-2LL5F100-2IL5F100-2VC5F100-2QL5F100-4IL5F100-4LL5F100-4QL5F100-2EC5F100-2EL5F100-6MT5F100-8MT5F100-PLT5F100-2QC 5F100-4EL5F100-6IC5F100-6LCLeviton is dedicated to designing, developing and manufacturing sustainable high-performance structured cabling and speciality cabling solutions. Network Solutions products are available worldwide in over 100 countries. Visit us online to learn more.NETWORK SOLUTIONS GLOBAL HEADQUARTERS Bothell, WA, USA | /ns(800) 824 3005 / +1 (425) 486 2222 | ****************** NETWORK SOLUTIONS EUROPEAN HEADQUARTERS Glenrothes, UK | /ns/emea+44 (0) 1592 772124 | *****************************Page 2 of 2For further support information, visit /ns/support5F100-xxx (precision molded)ELECTRONIC FILESFor CAD files, typical specs, or technical drawings (.DXF, .DWG), visit .PRODUCT SPECIFICATIONS 5F100-xxx (precision molded)SDX FIBER ADAPTER PLATESDescriptionPart No.Plate (beige), 62.5 µm MM (OM1), Duplex LC, 12-fiber, zirconia ceramic sleeve 5F100-2IL Plate (black), 50 µm MM (OM2), Duplex LC, 12-fiber, zirconia ceramic sleeve5F100-2EL Plate (aqua), 50 µm LOMM (OM3 & OM4), Duplex LC, 12-fiber, zirconia ceramic sleeve 5F100-2QL Plate (blue), SM (OS1 & OS2), Duplex LC, 12-fiber, zirconia ceramic sleeve 5F100-2LL Plate (green), SM/APC (OS2), Duplex LC, 12-fiber, zirconia ceramic sleeve 5F100-2VL Plate (beige), 62.5 µm MM (OM1), Quad LC, 24-fiber, zirconia ceramic sleeve 5F100-4IL Plate (black), 50 µm MM (OM2), Quad LC, 24-fiber, zirconia ceramic sleeve5F100-4EL Plate (aqua), 50 µm LOMM (OM3 & OM4), Quad LC, 24-fiber, zirconia ceramic sleeve 5F100-4QL Plate (blue), SM (OS1 & OS2), Quad LC, 24-fiber, zirconia ceramic sleeve 5F100-4LL Plates (beige), 62.5 µm MM (OM1), Duplex SC, 6-fiber, zirconia ceramic sleeve 5F100-6IC Plates (black), 50 µm MM (OM2), Duplex SC, 6-fiber, zirconia ceramic sleeve 5F100-6EC Plates (aqua), 50 µm MM (OM3 & OM4), Duplex SC, 6-fiber, zirconia ceramic sleeve 5F100-6QC Plates (blue), SM (OS1 & OS2), Duplex SC, 6-fiber, zirconia ceramic sleeve 5F100-6LC Plates (green), SM/APC (OS2), Duplex SC, 6-fiber, zirconia ceramic sleeve 5F100-6VC Plate (beige), 62.5 µm MM (OM1), Duplex SC, 12-fiber, zirconia ceramic sleeve 5F100-2IC Plate (black), 50 µm MM (OM2), Duplex SC, 12-fiber, zirconia ceramic sleeve5F100-2EC Plate (aqua), 50 µm LOMM (OM3 & OM4), Duplex SC, 12-fiber, zirconia ceramic sleeve 5F100-2QC Plate (blue), SM (OS1 & OS2), Duplex SC, 12-fiber, zirconia ceramic sleeve 5F100-2LC Plate (green), SM/APC (OS2), Duplex SC, 12-fiber, zirconia ceramic sleeve 5F100-2VC Plate (black), ST MM/SM, 6-fiber, zirconia ceramic sleeve 5F100-6MT Plate (black), ST MM/SM, 8-fiber, zirconia ceramic sleeve 5F100-8MT Plate (black), Blank5F100-PLTBlank styleSC styleLC styleST style。
HDS USPV产品简介
8、1、HDS USP-V磁盘存储产品介绍HDS USP-V存储系统内部架构HDS USP V架构同样采用HDS久负盛名的高性能、无瓶颈的Universal Star Network全光纤交换结构（第四代 Hi-Star架构）。
Hi-Star全光纤交换式结构是HDS公司秉承了多年大型主机的设计理念，将众多大型主机中的成熟、高效的技术应用于存储系统之上，在2000年推出了第一代Hi-Star全光纤交换式结构的高端存储系统――9900，该产品一经推出就受到广大高端用户的肯定，在存储业界竖立了高性能、高可靠性、高扩展性的高端存储系统形象。
在2002年HDS公司在原有Hi-Star结构基础上提高CSW的运算能力，增加内部通道数量和带宽，升级前后端控制器上的CPU，推出了基于Hi-Star II结构的9900V高端存储系统，该系统的性能、扩展性、可靠性等全面超过9900，成为HDS公司又一个成功的高端存储系统。
2007年，HDS公司推出了第四代全光纤交换式体系架构――Universal Star Network，并且基于该架构推出了具有划时代意义的HDS USP V超高端存储系统，该系统性能、扩展性等方面全面超越目前业界已有的高端存储系统，而且提供了全面的虚拟存储解决方案，使异构存储系统互联互通成为可能。
这种交换式结构的技术是提供了“点对点”、“无阻塞”的数据访问，如图所示，在交换式架构中，最重要的部件是缓存交换模块（CSW）。
通过CSW，主机接口控制器、数据Cache和磁盘通道控制器连接在一起，数据Cache与前后两端控制器之间都能够构成“点对点”的连接，实现并发通道数量最大，数据通道利用率最高。
通过使用交换式的结构，使HDS USP V磁盘存储系统具有了良好的扩展能力，前端的主机通道控制器、后端磁盘通道控制器和Cache都能够在线的、灵活的进行升级，从而降低了系统升级的投资。
存储系统并发处理能力越高，就意味着可以处理更多的应用系统读写请求，进一步提高整个系统的性能。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
DESCRIPTION: DC/DC converter
PART NUMBER: VASD2-SIP series features
·isolated 2 W output
·temperature range: -40°C~+85°C ·unregulated
·high efficiency to 87%·dual voltage output ·small footprint ·DIP package style
·industry standard pinout ·UL94-V0 package ·no heatsink required ·1K Vdc isolation
·power density 1.42 W/cm³
·no external component required ·low cost
description
Designed to convert fixed volt-ages into an isolated voltage, the VASD2-SIP series is well suited for providing board-mount local supplies in a wide range of appli-cations, including mixed
analog/digital circuits, test &measurement equip.,
process/machine controls, data-com/telecom fields, etc...
The semi-regulated output can be followed by 3-terminal regulators to provide output protection, in addition to output regulation.
NOTE:
1. All specifications measured at TA=25°C, humidity <75%, nominal input voltage and rated output load unless otherwise specified.
model input voltage output output current package number
nominal range voltage max.min.efficiency
style VASD2-S5-D5-SIP 5 Vdc 4.5~5.5 Vdc ±5 Vdc ±200 mA ±20 mA 82%
SIP VASD2-S5-D9-SIP 5 Vdc 4.5~5.5 Vdc ±9 Vdc ±111 mA ±12 mA 83%SIP VASD2-S5-D12-SIP 5 Vdc 4.5~5.5 Vdc ±12 Vdc ±83 mA ±9 mA 85%SIP VASD2-S5-D15-SIP 5 Vdc 4.5~5.5 Vdc ±15 Vdc ±67 mA ±7 mA 85%SIP VASD2-S12-D5-SIP 12 Vdc 10.8~13.2 Vdc ±5 Vdc ±200 mA ±20 mA 83%SIP VASD2-S12-D9-SIP 12 Vdc 10.8~13.2 Vdc ±9 Vdc ±111 mA ±12 mA 84%SIP VASD2-S12-D12-SIP 12 Vdc 10.8~13.2 Vdc ±12 Vdc ±83 mA ±9 mA 86%SIP VASD2-S12-D15-SIP 12 Vdc 10.8~13.2 Vdc ±15 Vdc ±67 mA ±7 mA 86%SIP VASD2-S24-D5-SIP 24 Vdc 21.6~26.4 Vdc ±5 Vdc ±200 mA ±20 mA 84%SIP VASD2-S24-D9-SIP 24 Vdc 21.6~26.4 Vdc ±9 Vdc ±111 mA ±12 mA 85%SIP VASD2-S24-D12-SIP 24 Vdc 21.6~26.4 Vdc ±12 Vdc ±83 mA ±59 mA 87%SIP VASD2-S24-D15-SIP
24 Vdc
21.6~26.4 Vdc
±15 Vdc
±67 mA
±7 mA
87%
SIP
DESCRIPTION: DC/DC converter
PART NUMBER: VASD2-SIP series
DIMENSIONS(mm)
TYPICAL
CHARACTERISTICS
DESCRIPTION:
DC/DC converter
PART NUMBER: VASD2-SIP series
TABLE 2
-Minimum loading
The converter needs a minimum of 10% loading to maintain output regulation. Operation under no-load conditions will not cause immediate damages but may reduce reliability, and cause performance not to meet specifications.-Regulation
With a semi-regulated design, the converter’s output voltage varies with load current and will change proportionally to the input voltage. If regulated output is needed, an external regulator can be used as shown in Figure 2.
-Protection
The converter has minimal protection against input over-voltage or output over-load, and may be permanently damaged if exposed to these conditions. An input clamping device can be used for input voltage limiting. An input fuse or an output fuse also be used to protect against over-loading.-Dual outputs used as a single output
The +Vout and -Vout can be used to obtain a single output that is the sum of the two outputs. In this case, the COM pin
shouldn’t be used.-External Regulator
An external 3-terminal regulator can be connected to the output of the converter to achieve full regulation. Make sure the converter’s output voltage provides sufficient head room for the regulator. An additional benefit is that the built-in protection features in the regulator, such as OCP, OTP, etc, will protect the converter also. In a complimentory supply, a negative output regulator must be used to achieve the negative regulated output.。