HITECH海泰克指拨开关说明
A6C 1高度可靠的微型DIP开关说明书
Highly Reliable Subminiature DIP Switch•Precision rotary cam and contactor drive provide high reliability•Subminiature: 9 (W) x 6.6 (L) x 4.5 (H) mm•Molded base and rotor sealed by O-ring; eliminates the need for tape sealing •RoHS CompliantOrdering InformationImportant Note: Switches cannot be water-washed.Specifications■CharacteristicsNote: Data shown are of initial value.■ConstructionOutput code type No. of switching positions Part numberTop actuated Side actuated BCD10A6C-10R(N)A6CV-10R BCD Hexadecimal16A6C-16R(N)A6CV-16RSwitching capacity 100 mA, 30 VDC Permissible load 10 µA, 3.5 VDC min.Carry current 100 mA max.Contact resistance 200 M Ω max.Insulation resistance 100 M Ω min. (at 250 VDC)Dielectric strength 500 VAC for 1 minute between current-carrying metal part and ground 250 VAC for 1 minute between terminals of same pole Operating force 15 to 100 g-cmVibration Malfunction durability 10 to 55 Hz, 1.5 mm double amplitude Shock Malfunction durability Approx. 300 m/s 2 (30 G)MaterialsBase/Cover PPS (Polyphenylene sulfide)Rotor PBT (Polybutylene terephthalate)O-ringAcryl nitril butadiene rubber Movable contact SUS plate, gold-plated T erminal42-alloy plate (nickel-iron alloy)Ambient temperature Operating-20° to 70°C Humidity 35% to 95% RH Service life Mechanical 10,000 operations min.Electrical 2,000 operations min.WeightA6C-10R, -16R: Approx. 0.4 g, A6CV-10R, -16R: Approx. 0.7 gThe movable contactor is moved as the rotor rotates. The terminalsare insert molded into the base. The rotor is secured by an O-ring and the case and the cover are made of plastic resin. Therefore, the internal mechanism is effectively sealed.DimensionsUnit: mm (inch)■A6C-10R(N)■A6CV-10R■A6C-16R(N)■A6CV-16RTerminal arrangement (bottom view)Mounting holesPCB dimension(Top view)Internal connections(top view)Omron Electronic Components, LLCTerms and Conditions of Sales1.Definitions: The words used herein are defined as follows.(a) Terms:These terms and conditions(b) Seller:Omron Electronic Components LLC and its subsidiaries(c) Buyer:The buyer of Products, including any end user in section III through VI(d) Products:Products and/or services of Seller(e) Including:Including without limitation2.Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms.3.Distributor: Any distributor shall inform its customer of the contents after and includingsection III of these Terms.1.Prices; Payment: All prices stated are current, subject to change without notice by Seller.Buyer agrees to pay the price in effect at time of shipment. Payments for Products received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice.2.Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent toBuyer after deducting transportation charges, taxes and duties, and will be allowed only if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past due amounts owing to Seller.3.Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximumlegal rate, whichever is less, on any balance not paid within the stated terms.4.Orders: Seller will accept no order less than 200 U.S. dollars net billing.5.Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyershall make remittance to Seller at the then current exchange rate most favorable to Seller; provided that if remittance is not made when due, Buyer will convert the amount to U.S. dollars at the then current exchange rate most favorable to Seller availableduring the period between the due date and the date remittance is actually made.ernmental Approvals: Buyer shall be responsible for all costs involved in obtainingany government approvals regarding the importation or sale of the Products.7.Taxes: All taxes, duties and other governmental charges (other than general real propertyand income taxes), including any interest or penalties thereon, imposed directly orindirectly on Seller or required to be collected directly or indirectly by Seller for themanufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller.8.Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts.9.Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyerindemnifies Seller fully against all costs or expenses arising in connection therewith. 10.Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting fromcauses beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority.11.Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:(a) All sales and shipments of Products shall be FOB shipping point (unless otherwisestated in writing by Seller), at which point title to and all risk of loss of the Products shall pass from Seller to Buyer, provided that Seller shall retain a security interest in theProducts until the full purchase price is paid by Buyer;(b) Delivery and shipping dates are estimates only; and(c) Seller will package Products as it deems proper for protection against normalhandling and extra charges apply to special conditions.12.Claims: Any claim by Buyer against Seller for shortage or damage to the Productsoccurring before delivery to the carrier must be presented in detail in writing to Seller within 30 days of receipt of shipment.1.Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANYOMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONICCOMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E) SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.Buyer acknowledges that it alone has determined that the Products will meet theirrequirements of the intended use in all cases. Buyer must know and observe allprohibitions of use applicable to the Product/s.e with Attention: The followings are some examples of applications for whichparticular attention must be given. This is not intended to be an exhaustive list of all possible use of any Product, nor to imply that any use listed may be suitable for any Product:(a) Outdoor use, use involving potential chemical contamination or electricalinterference.(b) Use in consumer Products or any use in significant quantities.(c) Energy control systems, combustion systems, railroad systems, aviation systems,medical equipment, amusement machines, vehicles, safety equipment, andinstallations subject to separate industry or government regulations.(d) Systems, machines, and equipment that could present a risk to life or property.3.Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVINGSERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USEWITHIN THE OVERALL EQUIPMENT OR SYSTEM.4.Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZEDVEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY SELLER.5.Programmable Products: Seller shall not be responsible for the Buyer's programming ofa programmable Product.1.Warranty: Seller's exclusive warranty is that the Products will be free from defects inmaterials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE OF THE PRODUCTS.2.Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the formoriginally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Product; provided that there shall be noliability for Seller or its affiliates unless Seller's analysis confirms that the Products were handled, stored, installed and maintained and not subject to contamination, abuse,misuse or inappropriate modification. Return of any Products by Buyer must beapproved in writing by Seller before shipment.3.Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FORSPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF THE PRODUCT ON WHICH LIABILITY IS ASSERTED.4.Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and itsemployees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products.1.Intellectual Property: The intellectual property embodied in the Products is the exclusiveproperty of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Product made to Buyer specifications infringedintellectual property rights of another party.2.Property; Confidentiality: Notwithstanding any charges to Buyer for engineering ortooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Products areconfidential and proprietary, and Buyer shall limit distribution thereof to its trustedemployees and strictly prevent disclosure to any third party.3.Performance Data: Performance data is provided as a guide in determining suitabilityand does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements.4.Change In Specifications: Product specifications and description may be changed at anytime based on improvements or other reasons. It is Seller’s practice to change part numbers when published ratings or features are changed, or when significantengineering changes are made. However, some specifications of the Product may be changed without any notice.5.Errors And Omissions: The information on Seller’s website or in other documentationhas been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions.6.Export Controls: Buyer shall comply with all applicable laws, regulations and licensesregarding (a) export of the Products or information provided by Seller; (b) sale ofProducts to forbidden or other proscribed persons or organizations; (c)disclosure to non-citizens of regulated technology or information.1.Waiver: No failure or delay by Seller in exercising any right and no course of dealingbetween Buyer and Seller shall operate as a waiver of rights by Seller.2.Assignment: Buyer may not assign its rights hereunder without Seller's written consent.w: These Terms are governed by Illinois law (without regard to conflict of laws). Federaland state courts in Illinois have exclusive jurisdiction for any dispute hereunder.4.Amendment: These Terms constitute the entire agreement between Buyer and Sellerrelating to the Products, and no provision may be changed or waived unless in writing signed by the parties.5.Severability: If any provision hereof is rendered ineffective or invalid, such provision shallnot invalidate any other provision.Certain Precautions on Specifications and UseOMRON ON-LINEGlobal - USA - Cat. No. J01C-E-01Printed in USAOMRON ELECTRONIC COMPONENTS LLC55 E. Commerce Drive, Suite B Schaumburg, IL 60173847-882-228801/07 Specifications subject to change without noticeComplete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website at – under the “About Us” tab, in the Legal Matters section.ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.T o convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.。
E+H Solicap M FTI55 FTI56 电容限位开关操作手册
开关延迟时间：5 s F
开关延迟时间：1 s F
G
MMAINX
G
MAX
失效安全模式：低限 (MIN) 传感器未被覆盖时，输出切换至安全输出 ( 报警信号 ) 例如：用于泵的空保护和泵保护
失效安全模式：高限 (MAX) 传感器被覆盖时，输出切换至安全输出 ( 报警信号 ) 例如：用于溢出保护
按键
功能
A
4 接线 . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4.1 推荐连接 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 4.2 在 F16、 F15、 F17、 F13 外壳中接线 . . . . . . . 38 4.3 在 T13 外壳中接线 . . . . . . . . . . . . . . . . . . . . . . . 39 4.4 连接设备 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 4.5 防护等级 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 4.6 连接电子插件 FEI51
Solicap M FTI55, FTI56
电子插件：FEI53、 FEI57S
A 1
FEI5x
ḽ
-+
B 2
0...1600pF 0.....500pF
概述
LED示⚥ Ӟ䎧 䰚⛱ ➴⚝
LED 指示灯 1 工作 ：每 5 s 闪烁一次
BA300Fzh016
4.海联科产品介绍和使用方法2023简版
4.海联科产品介绍和使用方法4. 海联科产品介绍和使用方法1. 产品介绍海联科是一家专业从事智能家居解决方案的公司，提供了多种产品供用户选择。
下面将介绍海联科的几款主要产品：1.1 智能门锁海联科的智能门锁采用最新的指纹识别技术，可以实现高效便捷的门锁操作。
通过使用指纹识别功能，用户可以轻松进入和退出房间，无需再使用钥匙。
智能门锁还支持方式远程开锁功能，用户只需相关APP，并通过蓝牙连接门锁，即可实现远程开锁。
智能门锁的安全性也得到了极大的保证，因为它采用了先进的加密技术，可以有效防止非法侵入。
1.2 智能插座海联科的智能插座可以使普通的插座变成智能插座。
用户可以使用方式APP或者语音来控制插座的开启和关闭，无需亲自去触碰插座开关。
智能插座还支持预定定时任务功能，用户可以根据自己的需要，在特定的时间开启或关闭插座。
智能插座的使用非常简单，用户只需将插座插入电源插座，然后将电器设备插入智能插座即可。
1.3 智能灯泡海联科的智能灯泡可以实现灯光的远程控制。
用户可以通过方式APP选择不同的颜色和亮度，调整灯光效果。
智能灯泡还支持定时任务功能，用户可以根据自己的习惯，在特定的时间点打开或者关闭灯光。
智能灯泡还可以与音乐相结合，在听音乐时根据音乐的节奏闪烁灯光，提供更好的音乐体验。
2. 使用方法2.1 智能门锁的使用方法- 步骤 1：，安装智能门锁。
将智能门锁装在房门上，确保固定牢固。
- 步骤 2：注册指纹。
使用指定的APP注册指纹，录入需要使用的指纹数据。
- 步骤 3：设置远程开锁。
海联科提供的APP，并通过蓝牙连接智能门锁，设置远程开锁功能。
- 步骤 4：使用智能门锁。
使用已注册的指纹或者远程开锁功能打开智能门锁。
2.2 智能插座的使用方法- 步骤 1：将智能插座插入电源插座，确保供电正常。
- 步骤 2：指定的APP，并通过蓝牙连接智能插座。
- 步骤 3：使用APP控制智能插座。
通过APP或者语音的指令，可以控制智能插座的开关状态。
HiTool工具使用说明
初稿，仅供 参 考 ！
文档版本 00B01 (2014-12-20)
海思专有和保密信息 版权所有 © 深圳市海思半导体有限公司
ii
HiTool 工具使用说明
插图目录
初稿，仅供 参 考 ！
插图目录
图 1-1 HiTool 选择芯片型号 ................................................................................................................................ 1 图 1-2 Hi3536 工具界面 ....................................................................................................................................... 2 图 3-1 HiTool 按分区烧写界面 ............................................................................................................................ 4 图 3-2 参数配置 ................................................................................................................................................... 5 图 3-3 配置单板分区信息.................................................................................................................................... 6 图 3-4 编辑单板分区信息.................................................................................................................................... 7 图 3-5 提醒是否保存分区信息界面.................................................................................................................... 8 图 3-6 分区信息保存界面.................................................................................................................................... 9 图 3-7 单击 Burn ................................................................................................................................................ 10 图 3-8 烧写过程 ................................................................................................................................................. 11 图 4-1 HiTool 烧写界面 ...................................................................................................................................... 12 图 4-2 参数配置 ................................................................................................................................................. 13 图 4-3 配置单板烧写信息.................................................................................................................................. 14 图 4-4 单击 Burn ................................................................................................................................................ 15 图 4-5 烧写过程 ................................................................................................................................................. 16 图 5-1 HiTool 烧写界面 ...................................................................................................................................... 17 图 5-2 串口选择 ................................................................................................................................................. 18 图 5-3 配置 boot 烧写信息 ................................................................................................................................ 19 图 5-4 点击 Burn ................................................................................................................................................ 20 图 5-5 烧写过程 ................................................................................................................................................. 21
海泰克
貳.软件操作及练习前言:为了协助您很快的了解ADP3的规划操作，本章将详细介绍常用画面组成组件的基本范例，及几种典型组件的设计操作方法让初学者很快地就可以完成实际的画面编辑工作，并且逐步说明实际和P.L.C.联机之执行步骤及相关参数设定注意事项；并可立即和PLC联机操作。
而相关组件进阶应用之设计说明请洽各区经销商的人机应用课程介绍。
※本章说明乃针对PLC厂牌为S7-200 CPU214机型。
练习1、开启应用档1). 方法一：在档案栏的下拉窗体中选开新档案。
方法二：鼠标直接点取功能按钮行之开新档案图式按钮。
2). 出现如图2-1的对话框设定盒；您可输入新应用档批注名称“Myapplication”、选取PWS-人机接口的机型“PWS-700T”、及指定欲联机应用的PLC厂牌机型“Simatic S7-200 (via PPI)”。
图2-1 开新档案对话框设定盒一图2-2 开新档案对话框设定盒二3、当新应用文件被开启后，屏幕会出现图2-3 ADP3画面层程序窗口。
图2-3 ADP3程序窗口_应用文件层窗口练习2、认识画面组件可对应的PLC资料地址在ADP3开始规划画面组件前，设计者必须清楚了解可以使用的PLC资料地址的格式及范围；在ADP3软件中大部份均依照PLC本身原厂格式，所以您可以参考PLC原厂技术手册；下表所列为针对SIEMENS S7-200 CPU216：表1. 在ADP3软件规划可以使用的P.L.C.缓存器地址的格式及范围缓存器种类代号格式编号范围资料长度Remark Input Image IWn n=0-6 WordInput Image IDn n=0-4 Double WordOutput Image QWn n=0-6 WordOutput Image QDn n=0-4 Double WordInternal Bits MWnn nn=0-30 WordInternal Bits MDnn nn=0-28 Double WordSpecial Bits SMWnnn nnn=0-27 Word Read only Special Bits SMWnnn nnn=28-192 WordSpecial Bits SMDnnn nnn=28-190 Double WordData Area VWnnnn nnnn=0-5118 WordData Area VDnnnn nnnn=0-5116 Double WordSpecial S SWnn nn=0-30 WordSpecial S SDnn nn=0-28 Double WordTimer Tnnn nnn=0-255 WordCounter Cnnn nnn=0-255 WordAnalog input word AIWnn nn=0-30 Word Read only Analog output word AQWnn nn=0-30 Word Read only功能圖式按鈕行開新檔案圖式按鈕標題行存檔圖式按鈕開新畫面圖式按鈕呼叫畫面圖式按鈕呼叫舊檔圖式按鈕注意1:CPU-212 不能使用AIW, AQW, SW, SD注意2:PLC缓存器地址的范围须受限于P.L.C主机CPU的机型，应用时，请限制不可超过该CPU本身的最大值，否则会通讯失败。
泰克数字示波器（60MHzw使用说明书+功放连接.doc
数字示波器一，功能检查1.接通仪器电源.仪器执行所有自检项目,并确认通过自检,按SA VE/RECALL按钮,从顶部菜单框,默认的探头菜单衰减系数设值定为10X.2.将p2100探头上的开关设定为10x,并将示波器探头与通道1连接.将探头连接器上的插对准ch1同轴电缆插接件上的插头并插入,然后向右旋转以拧紧探头.把探头端部和接地夹接到探头补偿器的连接器上.3.按自动设置钮.几秒钟内,可见到方波显示按ch1 菜单按钮两次以关闭通道1 ,按ch2 菜单按钮以打开通道2..二,探头补偿在首次将探头与任一输入通道连接时,进行此调节,使探头与输入通道相匹配.1 . 将探头菜单衰减系数设定为10x,将探头上的开关设定为10x并将示波器探头与通道1连接.将探头端部与探头补偿器的5伏连接器相连,基准导线与探头补偿器的地线连接器相连,打开通道,然后按自动门置.2 检查所显示波形的形状.3 如必要,调节探头.自校准：应将所有探头或导线与输入连接器断开，然后，按UTILITY 辅助功能钮，选择DO SELF CAL执行自校准，以确认准备就绪。
数字示波器三.探头衰减系数设定:探头有多种衰减系数,它们会影响示波器垂直标尺度数.如改变(检查)探头衰减系数设定值,按所使用通道的---垂直功能菜单钮, 然后按---探头钮旁的选择钮,直至显示正确的设定值.该设定在再次改变前一直有效.注意:出厂时预定值为10x.确认在探头上衰减开关的设定与示波器上探头探头菜单的选项相同.探头开关的设定值为1 和10.注意:衰减开关,设定在1 时探头将示波器的带宽限制在7兆,欲全带宽时,必将开关设定为10-.四，基本概念（一），触发:触发决定了示波器何时开始采集数据和显示波形,一旦触发被正确设定.它可以把不稳定的显示或黑屏转换成有意义的波形.示波器在开始采集数据时,先收集足够的数据用来在触发点的左方画出波形,示波器在等待触发条件发生的同时连续地采集数据.当检测到触发后,示波器连续地采集足够的数据以在触发点的右方画出波形.1．信源:触发可从多种信源得到:输入通道,市电,外部触发.1）输入通道:最常用, 可任选. 被选中作为触发信源的通道,无论其输入是否被显示.都能正常工作.2）市电:用来显示信号与动力电,如照明设备和动力提供设备,之间的频率关系.示波器将产触发,无需人工输入触发信号.3）外部触发: 用于在两个通道上采集数据的同时在第三个通道上输入触发.2．触发类型:1）边沿触发:可利用模拟和数字测试电路进行边沿触发,当触发输入沿给方向通过某一给定电平时,边沿触发发生.2）视频触发: 标准视频信号可用来进行场行触发.3．触发方式:1）自动触发:使得示波器即使在没有检测到触发条件的情况下也能取到波形,当示波器在一定等待时间”该时间由时基设置决定”器将进行强制触发.当强制进行无效触发时,示波器不能使波形同步,则显示有波形将卷在一起,当有效触发发生时,显示器上的波形是稳定的.可用自动方式来监测幅值电平等可能导致波形显示发生卷滚的因素.2）正常触发: 示波器在正常触发方式下只有当其被触发时才能获取到波形,无触发时,示波器将显示原有波形而获取不到新波形.3）单次触发:在单次触发方式下,用户每按下一次”运行”按钮,示波器将检测到一次触发获取一个波形.示波器采集到的数据依赖于获取方式.4．释抑:释抑时间—每次采集之后的一段时间.为了产生稳定的显示波形的需要.释抑周期可被用来阻止脉冲序中第一个脉冲之外的其它脉冲上的触发.这样,示波器将总是只显示第一个脉冲.为获得释抑控制,按下HORIZONTAL “释抑”,并用释抑旋钮改变释抑周期.5．耦合触发耦合决定信号的何种分量被传送到触发电路,耦合类型包括直流,交流,噪声抑制,高频抑制和低频抑制.1）直流:允许所有的分量通过.2）交流: 阻止直流分量通过.3）噪声抑制:降低触灵敏度并要求较高的信号幅值才能形成稳定触发,从而减少了在噪声上信号错误触发的可能性.4）高频抑制:阻止信号的高频部分通过,只允许低频分量通过.5）低频抑制: 作用效果与高频抑制耦合相反.6．斜率和电平斜率控制钮决定示波器的触发点在信号上升沿或在下降沿,欲获得触发斜率控制,按下”触发菜单”按钮选择”边沿”并用”斜率”按钮选择上升或下降.电平控制钮决定触发点在,边沿上的确切位置,欲获得触发电平控制,按下”HORIZONTAL”菜单按钮,选择“电平”并旋转”电平”旋钮改变数值.数字示波器（二）采集数据采集模拟数据时,本示波器将其转换成数字形式.时基设置将影响采集数据的速度.1，采集数据有三种不同的方式:1）采样: 在该获取方式下,示波器按相等的时间间隔对信号采样以重建波形.这种方式在大多数情况下正确地表示了模拟信号.这种方式不能获取模拟信号在两次采样时间间隔内发生的迅速变化, 从而导至混淆,并有可能丢失信号中的窄脉冲.2）峰值检测: 示波器采集每一采样间隔中输入信号的最大值,并用采样数据显示波形.这样,示波器可以获取和显示在采样方式下可能丢失的窄脉冲,但噪场将比较明显.3）平均值: 示波器获取若干波形,然后取平均,并显示平均后的波形,可用这种方式减少随机噪声.2．时基通过在离散点上对输入信号的采样将波形数字化,时基控制数字化的频率.使用“秒/刻度”旋钮调整时基到某一水平刻度以适合用户需要.（三）．标度和定位波形通过调整波形的刻度和位置可改变其在导电屏幕上的显示.刻度被改变时,显示波形的尺寸将被放大或缩小.位置改变时,波形将上下左右移动.1．垂直刻度和位置通过上下移动波形可以改变显示波形的垂直位置,为对比数据,可将波形上下对齐.改变形的垂直刻度时,显示波形将相对接地电平收缩或扩张.2．水平刻度和位置:触发前后可通过调整”水平位置”控制钮查看波形数据, 改变波形的水平位置实际改变的是触发与显示区中心的时间偏差使用”秒/刻度”旋钮可改变所有波形的水平刻度.如查看波形的一个周期以测量其上升沿的对冲.数字示波器（四）测量：示波器所显示的电压—时间坐标图，可用来测量所显示的波形。
hitec A9遥控器说明书
hitec A9遥控器说明书
1、装好电池，正常使用万能遥控器。
需要安装好电池，注意要用全新的电池，不要新旧电池掺杂起来，容易损害遥控器，缩短使用时间。
2、打开电视的方法，长按着万能遥控器上红色按钮，即可打开处于睡眠状态的电视。
但有些万能遥控器需要开着电视才能操控，那就要通过电视上的开关打开电视了。
3、换台的方法，使用万能遥控器换台前，先要激活遥控器，一般万能遥控器上都有各主要品牌电视的按键，比如1键是长虹电视，2键是LG电视等等。
根据你的电视品牌要长时间按住对应的数字按键，直到遥控器红色指示灯闪烁，说明万能遥控器已经激活了，就可以正常使用了。
4、如果杂牌的电视没有对应的按键指示，可以按住通用的按键即可，同样要等指示灯闪烁再松开手。
如果使用万能遥控器过程中遥控器失灵，要按住遥控器的音量键，遥控器红色指示灯闪烁就恢复正常了。
5、从代码表中查出代表要遥控的电视机相应的三位数代码。
HE1G-L 手握式使能开关 - ideccom
1－2／A1－B1 5－6／A3－B3 3－4／A2－B2
按钮复位时 （位置 3→1）
1－2／A1－B1 5－6／A3－B3 3－4／A2－B2
位置 2 位置 2
Flush Silhouette 开关 · 指示灯
位置 3 （圆孔）
电气控制箱
开关 · 指示灯 （方孔） 表面安装型 LED 指示灯 LUMIFA LED 照明单元 组合式 数字显示器
0.5 ～ 0.6N · m
保护等级
HE1G-L21SM 型 ：IP66（IEC 60529） HE1G-L21SMB 型 ：IP65（IEC 60529） HE1G-L20ME 型 ：IP65（IEC 60529） HE1G-L20MB 型 ：IP65（IEC 60529）
条件性短路电流 直接开开关
TÜV AC-15 250V/0.5A DC-13 125V/0.1A DC-13 30V/0.7A AC-15 250V/0.75A DC-13 125V/0.22A DC-13 30V/2.3A
UL/c-UL 250V AC/0.5A Pilot Duty 125V DC/0.1A Pilot Duty 30V DC/0.7A Pilot Duty
若操作按钮端部，可能因按压到另一边的 3 位置开关而造成 OFF 时的动 作延迟。
EMO 保护罩 SEMI 停止开关
一览
HE1B
HE2B
紧急停止开关 ：2NC 触点 （HE1G-L20ME 型 ：端子 No.5-6、7-8） （HE1G-L20MCE 型 ：内部连接器 Pin No. A3-B3、A4-B4）
一览 ø16X6
• HE1G-L20MB/HE1G-L20MCB 型
ø16XA 一体型
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
海泰克触摸屏用U 盘备份数据-----转载
(2011-10-27 09:42:19)
转载▼
标签：
触摸屏
数据
备份
u 盘
杂谈
自1996年天津罗升开始负责HITECH PWS 系列人机产品在大陆的推广和销售。
2005年瑞典Beijer 成功并购HITECH （海泰克）后，目前旗下的HMI 产品：EXTER 和PWS 两大系列在中国大陆的销售和服务全部由天津罗升企业有限公司负责。
由于EXTER 系列产品的加入，罗升的产品线更加的齐全。
下面针对BEIJER T70穿透和透明模式举例说明
功能：
将历史缓冲区的数据自动存储到CF 卡或U 盘，此功能可以将历史数据自动保存到CF 卡或U 盘，能够以EXCEL 表的形式在电脑中读取，方便客户存储和查看大量历史数据。
使用说明： ON
1
10 11 12 2 3 4 5 6 7 8 9
1．在工作参数设定中设定纪录缓冲区，在“备份存储装置”中选择“CF Card”或“USB Memory Card”这样，人机每采样一次，就会将数据自动备份到CF卡或者U盘，如图一。
图一
2．点击图一中的“编辑”，为要取样的数据取名字，如图二：
A：名称，为取样数据定义名称，中英文都可以。
B：字位置，该纪录缓冲区的第几个word。
C：格式，取样数据的格式。
D：长度，可以为单字也可以为双字。
图二
3．如此设置之后，人机会自动将纪录缓冲区中数据存保存到CF或U盘中，每个纪录缓冲区形成一个EXCEL文件，如图三
图三
4．各取样数据以图二中所取名字存在于CF卡，如图四
图四
Demo见demo21（数据保存至U盘只需要将“备份存储装置”更改为“USB Memory STICK”，其余操作与保存至CF卡一样）。