Test Report
胶合板密度板 检验报告
检验日期
Date of test.
检验依据
Test standard.
GB 18580-2001.
检验要求
Test item.
甲醛释放量
检验结论
Test conclusion.
该样品符合GB18580-2001标准E1级的要求
备注
Remark.
1.本报告含封面及封2
检验报告
TestReport
样品名称： 胶合板
sample:
规格型号：2440x1220x18mm
Type/Model
受检单位：
Inspected Entity
检验类别：委托检验
Type of Test:
检验报告（TestReport）
共2页第1页
样品名称
Sample.
胶合板
检验类别
Type of test.
抽样基数
Sample. Batch.
接样日期
Application date.
样品数量
Sample quantity.
生产日期
Date of production.
样品特性和状态
Sample description.
样品批号
Batch number.
检验环境
Environmental for test.
This report includes front cover and inside front cover.
2.以上生产日期，生产单位，商标，抽样地点，抽样基数栏目中如有填写内容均为委托方声明
The substances in the columns of manufacture data of production, brand sampling location and sample batch are declared by consignores.
可靠性实验报告模版
可靠性实验报告Reliability Test Report品质实验室声明THE DECLARATION OF QUALITYLABORATORYNO：SDC-D-PJ-22-B( / ) 1. 为提高产品质量，本实验室遵循科学、公正、准确的原则，为用户提供有效、迅速的服务。
Conducting scientifically, candidly and precisely, test service for improvingproduct quality is provided effectively and timely by this laboratory to our customers. 2. 报告无品质实验室专用图章无效。
The report is void without appropriative stamp of quality test laboratory.3. 报告涂改、部分复制无效。
The report is void if it is, in anyway, altered and/or copied.4. 本次试验结果仅适用于试验样品。
The results only apply to the device under test.5. 带*标记项目为非必要试验项目，若客户需要，可另外安排试验。
Items marked with * are unnecessary test items. If the customer needs, additional tests can be arranged.可靠性实验报告Reliability Test ReportNO：SDC-D-PJ-22-B( / )NO：SDC-D-PJ-22-B( / )附录一：试验/检测设备可焊性实验分项试验报告Solder ability SUB-ITEM TEST REPORT产品&试验信息 Product&Test Information NO：SDC-D-PJ-22-B( / )检验情况 Inspection Description试验/检测设备 Test/Inspection Device结论 Conclusion高低温循环试验分项试验报告TEMP.Cycles Test SUB-ITEM TEST REPORT产品&试验信息 Product&Test Information NO：SDC-D-PJ-22-B( / )检验情况 Inspection Description试验/检测设备 Test/Inspection Device结论 ConclusionPressure Cooker Test SUB-ITEM TEST REPORT产品&试验信息 Product&Test Information NO：SDC-D-PJ-22-B( / )检验情况 Inspection Description试验/检测设备 Test/Inspection Device结论 ConclusionHigh Temperature Storage Test SUB-ITEM TEST REPORT 产品&试验信息 Product&Test Information NO：SDC-D-PJ-22-B( / )检验情况 Inspection Description试验/检测设备 Test/Inspection Device结论 ConclusionLOW Temperature Storage Test SUB-ITEM TEST REPORT 产品&试验信息 Product&Test Information NO：SDC-D-PJ-22-B( / )检验情况 Inspection Description试验/检测设备 Test/Inspection Device结论 Conclusion恒温恒湿试验分项试验报告Temperature&Humidity Test SUB-ITEM TEST REPORT产品&试验信息 Product&Test Information NO：SDC-D-PJ-22-B( / )检验情况 Inspection Description试验/检测设备 Test/Inspection Device结论 Conclusion* 稳态温湿度偏压试验分项试验报告* Temperature Humidity Bias Test SUB-ITEM TEST REPORT 产品&试验信息 Product&Test Information NO：SDC-D-PJ-22-B( / )检验情况 Inspection Description试验/检测设备 Test/Inspection Device结论 Conclusion* 高加速温湿度应力试验分项试验报告* Highly Accelerated Stress Test SUB-ITEM TEST REPORT 产品&试验信息 Product&Test Information NO：SDC-D-PJ-22-B( / )检验情况 Inspection Description试验/检测设备 Test/Inspection Device结论 Conclusion* 高温工作寿命试验分项试验报告* High Temperature Operating Life SUB-ITEM TEST REPORT 产品&试验信息 Product&Test Information NO：SDC-D-PJ-22-B( / )检验情况 Inspection Description试验/检测设备 Test/Inspection Device结论 Conclusion。
Requirements for Test Report_SC0815
环境限用物质测试报告要求1.测试报告來源建议为上海检验检疫局机电中心、CTI、SGS、Intertek、TUV、BV、UL等广达认可之检测机构；若非上述实验室之报告，请一并提供该实验室ISO/IEC 17025或当地政府机关实验室认证之证书(核发证书的认证机构必须为ILCA, 如：TAF-CNLA、CNAS, etc.）、以及认证范围说明。
2.测试报告内容应包含下列信息：（1~9为必要项目；10, 11为建议项目）(1)广达测试报告汇总表（Covering letter of material testing reports）(2)检测单位名称及地址(3)报告编号(4)报告日期(5)实验室主管签章(6)测试样品叙述（型号、批号或制造日期）(7)样品拆分后之零组件或材料组成清单（部品名称、材料類别或外观描述）(8)检测方法、测试仪器和方法侦测极限（Method Detection Limit, MDL）(9)检测物质及测试结果(10)前处理流程及测试步骤(11)样品外观及其各测试部位片3.测试报告必须可充份展现该测试样品对RoHS的符合性；即测试报告应明确表示出该产品各部「均质材料」[1]之RoHS管制物质的分析结果。
4.为避免样品混合测试造成测试结果失真的风险，广达不接受混合测试之结果。
因此，除测试样品体积小于4mm3时，不需进行机械拆分[2]，可直接进行检测外，其他样品则必须先拆分为「均质材料」后，再行检测。
5.报告内容需保持页面整洁、文字及照片清晰可辨。
6. 报告内容不得擅自修改及伪造。
7. 测试日期为2007年7月1日后之报告为有效。
当产品之制造地、制程、原材料成分或组装工法等有变更时，即须更新测试报告并通知广达。
8. 测试样品之机械拆分原则，请參照中国国家标准化管理委员会「电子电器产品中有害物质检测产品拆分通用要求」或日本JGPSSI「零件、材料中含有化学物质调查說明书」之内容办理。
9.测试方式之要求：“ILCA MRA(国际实验室认证联盟相互承认办法)”签署会员国的实验室认证机构所核发之ISO 17025认证证书之实验室之测试报告中所引述的测试方法, 广达计算机皆可接受。
冲击试验报告模板
模拟整车行驶过程中遭遇撞击或通过大坑状态下对燃油泵性能的影响。
试验依据 Test Accordance: 样品数 Sample Quantity: 试验设备Test Equipment:
试验日期 Test Date:
振动台、燃油泵基本性能综合测试台
试验方法Test Method:
加速度30g；半正弦；持续时间6ms:六个空间方向；每个空间方向333次。
7#
148.47 5.83
7#
149.3 5.83
8#
144.38 5.88
8#
147.21 5.79
9#
152.17 5.67
9#
150.68 5.78
10# 测试电 147.25 压12V
5.71 、测试
10#
148.5 5.83
压力 400kP
a
备注 Notes：
图89 冲击试验工装
Hale Waihona Puke 1# 2# 3#147.52 154.01 152.39 6.08 5.81 5.87
1# 2# 3#
146.48 155 150.39 6.03 5.61 5.97
4#
151.3 6.12
4#
154.3 6.02
5#
152.12 5.88
5#
151.33 5.92
6#
157.37 5.79
6#
156.49 5.77
冲击试验报告模板Test Report
报告编号Report Number：
样品名称Sample Name：
燃油泵
零件号Part No
试验类型Test Type：■DV □PV □例行Routing Test □其它 Other：
Test Report
Test Report ContentIssue Date：Nov.10.2010Item Page Item Page Thermal Environmental Sequence 2 Battery Connector Life Test 52 Parametric and Functional Test 3 SIM Card Reader Life Test 53 Thermal Shock Test 6 Adapter Connector Life Test 54 First Drop Test 12 Motor Life Test 55 Shaker Table Vibration 19 Speaker Life Test 56 Dust Test 21 Power on/off Test 57 ESD TEST 23 Artificial Perspiration Test 58 Temperature Cycling 25 Salt Fog Test 59 Temperature Humidity Test 28 Paint Abrasion Test 60 Low Temperature Test 30 RCA Test 61 High Temperature Test 32 Rubbing Test 1 62 Second Drop Test 34 Rubbing Test 2 63 Package Vibrate Test 39 Screw Boss Inserting Part 64 Package Drop Test 42 Backlight Visibility Test 65 Mechanical Lift Sequence 44 Earphone Jack Test 66 Squeeze Test 45 Data Cable Strength Test 67 Twist Test 46 T Card Connector Life Test 68 Micro Drops Test 47 Drop Test 69 Coating Adhesion Test 48 Water Table Test 72 Hardness Test 49 Keypad Actuation Test 77 Lens Scratch Test 50 Cold/Hot Temperature Operational Test 78Battery Cover Life Test51 Intensive Mechanical Appearance and Operation Test82Update RecordMain Update Item Page Modify Date Mender Mechanical Lift Sequence 44 Oct.20.2010Huyoufang Backlight Visibility Test（Photo）65 Oct.21.2010Huyoufang About CPK showing 0.6~0.7 explain 83 Oct.21.2010Huyoufang About lens crack issue explain 84 Nov.10.2010HuyoufangTest Item: Thermal Environmental SequenceTest Item: Parametric and Functional Test Rev. Date: 06/15/10Checker: Huzhengfang Tester: YaoyuanlongTest Condition:Test environment: normal, TN/VN (3.8V，25 ℃)Frequencies to be tested: mid range1) Connect the SS to the UE antenna connector2) A call is set up according to the Generic call setup procedure.3) Enter the UE into loopback test mode and start the loopback test.Criterion:Before reliability test, testing function and parametric for all sample.Parametric test spec. follows 3GPP TS34.121 and 3GPP TS51.010-1, only test “Maximum Output Power” and “Reference Sensitivity”, Function and Appearance must all ok，No malfunctions or physical deformation should be evident. Also need to check inside of phone such as glue melt, screw loose, any abnormal/deformation on components, connection, etc.Test Equipment: (Agilent 8960)Parametric Test Data:Result:SampleFunction Appearance Parametric Judge NoPASS 1# OK OK OK2# OK OK OK3# OK OK OK4# OK OK OK5# OK OK OK6# OK OK OK7# OK OK OK8# OK OK OK9# OK OK OK10# OK OK OK11# OK OK OK12# OK OK OK13# OK OK OK14# OK OK OK15# OK OK OK16# OK OK OK17# OK OK OK18# OK OK OK19# OK OK OK20# OK OK OK21# OK OK OK22# OK OK OK23# OK OK OK24# OK OK OK25# OK OK OK26# OK OK OK27# OK OK OK28# OK OK OK29# OK OK OK30# OK OK OK31# OK OK OK32# OK OK OKACCELERATED LIFE TEST REPORTTest Item: Thermal Shock TestRev. Date: 06/15/10Checker: Huzhengfang Tester: YaoyuanlongTest Condition:Heat tank temperature: +85 ℃, lasts 45min ；Cold tank temperature: - 40 ℃, lasts 45min； Shift between cold and heat tank: ≦30s Cycle period: 25Cycles.Criterion:After thermal shock test, testing function and parametric for all sample.Parametric test spec. follow 3GPP TS34.121 and 3GPP TS51.010-1, only test “Maximum Output Power” and “Reference Sensitivity”, Functional testing, No malfunction or physical deformation should be evident. Also need to check inside of phone such as glue melt, screw loose, any abnormal/deformation on components, connection, etc.Test Equipment: (ETST-108-40AA)Process:Sample PhotoSamples into the chamberSet parameterHigh temperatureLow temperatureAfter test p arametric test data:WCDMA CPK DataGSM CPK DataResult:Thermal Shock Sample NO Function Appearance Parametric Judge 1# OK OK OKPASS 2# OK OK OK3# OK OK OK4# OK OK OK5# OK OK OK6# OK OK OK7# OK OK OK8# OK OK OK9# OK OK OK11# OK OK OK12# OK OK OK13# OK OK OK14# OK OK OK15# OK OK OK16# OK OK OK17# OK OK OK18# OK OK OK19# OK OK OK20# OK OK OK21# OK OK OK22# OK OK OK23# OK OK OK24# OK OK OK25# OK OK OK26# OK OK OK27# OK OK OK28# OK OK OK29# OK OK OK30# OK OK OK31# OK OK OK32# OK OK OKACCELERATED LIFE TEST REPORTTest Item: First Drop TestRev. Date: 06/15/10Checker: Huzhengfang Tester: Yaoyuanlong Test Condition:First Drop Test SequenceDescription Units50℃/90%RHRandom Drop (Hand)4,5,6,7,8,9,10,11－10℃ Random Drop－10℃(Hand)P1,P2,P3,P4,P5,P6,P7,P8 Room TemperatureRandom Drop (Hand)19,20,21,22,23,24,25,26 50℃/90%RHMachine Surface Drop12,13,16,17－10℃Machine Surface Drop18，27，P9,P10Produce Status during TestThe soak time in the chamber is 30 minutes pior to drop，with a battery attached and the unit turned on. The units in the random drop will be dropped by hand, six times, once on each plane. Commence within 30 seconds of the time product is removed from the temperature chamber and finish within 3 minutes. Drop height is to be 5ft. The drop surface will be a tiled concrete for the random drop by hand and ½” steel on tiled concrete for the machine surface drop.Criterion:Batteries and covers may detach during drop, but the units must power on once the batteries and covers have been replaced. At each drop plane the product is given a cursory check of operation. This cursory check should include powering on the radio and verifying as much functionality as possible in the time provided. Post drop functional and signaling testing is conducted to insure no electrical degradation is evident and no mechanical failures such as cracking, chipping, separation, bent or broken contacts, etc. have occurred. Electrical and mechanical integrity should be maintained.ProcessPart 1 50℃/90%RH Random Drop (Hand) Test Equipment: (MCUSOL)Set parameterDrop surfaceDrop heightTesting data:front Back left right top bottom Remark SampleNOOK OK OK OK OK N/A 4# OKOK OK OK OK OK N/A 5# OKOK OK OK OK OK N/A 6# OKOK OK OK OK OK N/A 7# OKOK OK OK OK OK N/A 8# OK9# OKOK OK OK OK OK N/A 10# OK OK OK OK OK OK Power off 1time11# OK OK OK OK OK OK N/APart 2 －10℃Random Drop (Hand)Test Equipment: (TT401-10)Set parameterDrop surface: The same as part 1 (still the concrete)Drop height: 5fh (1.5M)Testing data:NO front Back left right top bottom RemarkP1# OK OK OK OK OK OK N/AP2# OK OK OK OK OK OK N/A1time P3# OK OK OK OK OK OK Poweroff P4# OK OK OK OK OK OK N/AP5# OK OK OK OK OK OK N/AP6# OK OK OK OK OK OK N/AP7# OK OK OK OK OK OK N/AP8# OK OK OK OK OK OK N/APart 3 Room Temperature Random Drop (Hand) 23.5 ℃68% R.HDrop surface: The same as part 1 (still the concrete)Drop height: 5fh (1.5M)Testing data:NO front Back left right top bottom Remark19# OK OK OK OK OK OK N/A 20# OK OK OK OK OK OK N/A 21# OK OK OK OK OK OK N/A 22# OK OK OK OK OK OK N/A 23# OK OK OK OK OK OK N/A 24# OK OK OK OK OK OK N/A 25# OK OK OK OK OK OK N/A 26# OK OK OK OK OK OK N/APart 4 50℃/90%R.H Machine Surface DropTest EquipmentDrop surface: steel surfaceDrop height: 5fh (1.5M)Testing data:NO front Back left right top bottom Remark12# OK OK OK OK OK OK N/A 13# OK OK OK OK OK OK N/A 16# OK OK OK OK OK OK N/A 17# OK OK OK OK OK OK N/APart 5 －10℃ Machine Surface DropDrop surface: steel surfaceDrop height: 5fh (1.5M)Testing data:NO front Back left right top bottom Remark18# OK OK OK OK OK OK N/A 27# OK OK OK OK OK OK N/A P9# OK OK OK OK OK OK N/A P10# OK OK OK OK OK OK N/AAfter First Drop Test RF Data:Result:First Drop Test SampleNOFunction Appearance/ME Parametric Judge 4# OK OK OKPASS 5# OK OK OK6# OK OK OK7# OK OK OK8# OK OK OK9# OK OK OK10# OK OK OK11# OK OK OK12# OK OK OK13# OK OK OK16# OK OK OK17# OK OK OK18# OK OK OK19# OK OK OK20# OK OK OK21# OK OK OK22# OK OK OK23# OK OK OK24# OK OK OK25# OK OK OK26# OK OK OK27# OK OK OKP1# OK OK OKP2# OK OK OKP3# OK OK OKP4 OK OK OKP5 OK OK OKP6 OK OK OKP7 OK OK OKP8# OK OK OKP9 OK OK OKP10# OK OK OKACCELERATED LIFE TEST REPORTTest Item: Shaker Table VibrationRev. Date: 06/15/10Checker: Huzhengfang Tester: YaoyuanlongTest Condition:The shaker table is to be preset to 20Hz with a displacement of 6ms. The test duration is X，Y，Z ,60min/spindle.plane UnitsX 4,5,6,7,8,9,10,11,12,13Y 4,5,6,7,8,9,10,11,12,13Z 4,5,6,7,8,9,10,11,12,13Criterion:Units should remain ON and address book/messages still in memory, during the first 5 minutes under test, but may turn off during the next 55 minutes. Units should be free of functional and signaling failures after the stress. Cosmetic degradation to lenses and keypads protected by flips should be counted as failures if they occur with the flip closed. Paint wear through should be noted as an observation.Test equipment:Testing over pictureTesting data:BandTest Description Chan nel4# 5# 6#7#8#9#10# 11# 12#13#IMaximum Output Power 975021.3 21.821.421.821.821.321.8 21.7 21.621.2Reference Sensitivity Level -108.5 -108.5 -109.0 -109.0 -109.5 -108.0 -108.5 -108.5 -108.5 -107.5IIMaximum Output Power 940021.5 21.421.921.521.321.222 21.4 22.522.2Reference Sensitivity Level -110.0 -107.5 -109.0 -108.5 -110.0 -108.0 -108.5 -110.0 -107.5 -108.5VMaximum Output Power 417522.5 23.623.422.621.322.622.4 21.4 22.322.6Reference Sensitivity Level-109.0 -108.5 -108.5 -108.5 -110.0 -108.5 -109.0 -107.5 -108.0 -108.5Result:Shaker Table VibrationSampleNOFunctionAppearance/MEParametric Judge4# OK OK OK Pass5# OK OK OK 6# OK OK OK 7# OK OK OK 8# OK OK OK9# OK OK OK 10# OK OK OK 11# OK OK OK 12# OK OK OK 13# OKOK OKACCELERATED LIFE TEST REPORTTest Item: Dust TestRev. Date: 06/15/10Checker：Huzhengfang Tester: YaoyuanlongTest Condition:A single phone, Power offDuration: 2s，the time in still mode:15minCycle period: 8Cycles (4 hours)Criterion:All moving parts should retain freedom of movement and the display shall remain unobstructed. Test Equipment: (SC-1000)ProcessStep 1 Put device into the chamberSet parameterTemp 40℃ , Wind speed 6m/s, granule dia. 60umTesting data:After Test Result14# 15# 16# 17# 18#Functional test No failurepass pass pass pass passAppearance/ME CheckNo obvious distortionpass pass pass pass passRFTestBandTest Description ChannelIMaximum Output Power975021.721.821.121.721.6Reference Sensitivity Level-108.5 -108.5 -109.0 -108.0 -110.0 IIMaximum Output Power940021.521.621.723.122.6Reference Sensitivity Level-108.0 -108.5 -109.0 -108.5 -109.5 VMaximum Output Power417521.822.522.622.321.6Reference Sensitivity Level-108.0-108.5-109.0 -108.5 -110.0ResultDustSample NO Function Appearance/ME Parametric Judge14# OK OK OKPass15# OK OK OK 16# OK OK OK 17# OK OK OK 18# OK OK OKACCELERATED LIFE TEST REPORTTest Item: ESD TESTRev. Date: 06/15/10Checker: Huzhengfang Tester: YaoyuanlongTest Condition:Contact Mode: MAX.±8KV and Air Mode: MAX. ±15KV ，at to be subjected to 10 discharges at each voltage and polarity in all defined locations (10 maximum locations) to which a discharge will occur.Criterion:No soft failures are allowed at 5kV, and no hard failures are allowed at 8kV and 15kV. All functional and signaling tests are to occur periodically during the test to determine whether a hard or soft failure has happened and to provide the failure location, configuration and discharge polarity. Re-power up's are allowed at 8kV and 15kV, but are counted as failures at 5kV. Loss of address book, messages and/or time/date information is counted as a failure at both 5kV/8kV and 15kV. If the product(s) exhibit loss of address book, messaging or time/date information then the product(s) shall be reconfigured and testing continued.This is to allow full testing of the defined test locations. Conversely, if a lock up condition occurs, the product must not be altered or reconfigured. Rather, it should be submitted for analysis unchanged. Finally, one should be sure to check for full functional operation of the RF front-end circuitry by measuring the unit’s sensitivity.Comments:Contact: testing in 2, 5, 8 levels (5kv is a must to pass, restarting in 8 kV is acceptable))Air: testing in 10, 12, 15 levels (10kv is a must to pass, restarting in 15 kV is acceptable)Test Equipment: (EM TEST Dito)Contact:Air:Testing Data:ESDSample NOSortPlaceMicrophoneSpeakerI/O connectEarphone connectKeypad/Battery Cover gap1# Air OKOK OK OK OK Contact N/A OK OK OK N/A 2# Air OK OK OK OK OK Contact N/A OK OK OK N/A 3#Air OK OK OK OK OKContact N/A OK OK OKN/ABandTest Description Channel1#2#3#I Maximum Output Power975021.321.621.8Reference Sensitivity Level -109.5 -108.5 -109.0 II Maximum Output Power 940021.221.922Reference Sensitivity Level -108.5 -108.0 -108.5 VMaximum Output Power417521.422.221.8Reference Sensitivity Level -109.0 -108.5 -108.5Result:ESDSample NOCheck AirContactJudge±10KV±12KV±15KV±2KV±5KV±8KV1# Function /ME/RF OK OK OK OK OK OK Pass2# Function /ME/RFOKOKOKOKOKOK 3#Function /ME/RF OK OK OK OK OKOKACCELERATED LIFE TEST REPORTTest Item: Temperature CyclingRev. Date: 06/15/10Checker: Huzhengfang Tester: YaoyuanlongTest Condition:-40℃ to 75℃, 45 minute dwell, 17℃/min ramp,72hrs,Criterion:All functional tests are to be conducted after this test to insure electrical and mechanical integrity remains.Maximum Output Power and Reference Sensitivity Level follow 3GPP TS34.121Test Equipment: (ETST-108-40AA)Process:Step 1 Put samples into the chamberStep 2 Set parameterHigh temperatureLow temperatureTesting data:Sample NO Function Appearance Remark1# OK OK OK N/A4# OK OK OK N/A5# OK OK OK N/A6# OK OK OK N/A14# OK OK OK N/A15# OK OK OK N/A19# OK OK OK N/A20# OK OK OK N/A21# OK OK OK N/A22# OK OK OK N/A Parametric data:BandTestDescriptionChannel 1# 4# 5# 6# 14#15#19# 20# 21#22#I MaximumOutput Power975021.221.321.721.421.721.8 21.9 21.721.322.8 ReferenceSensitivity Level-109.5 -109.0 -108.5 -109.0 -108.5 -108.5 -108.5 -109.0 -109.0 -109.5II MaximumOutput Power940021.221.521.421.621.521.6 21.6 22.522.422.2 ReferenceSensitivity Level-108.0 -110.0 -107.5 -109.0 -108.0 -108.5 -109.0 -108.5 -109.0 -108.5V MaximumOutput Power417521.422.823.423.221.822.5 21.1 22.32221.6 ReferenceSensitivity Level-109.0 -109.0 -108.5 -108.5 -108.0 -108.5 -110.0 -108.5 -107.5 -108.5ResultTemperature Cycling SampleNOFunction Appearance Parametric Judge 1# OK OK OKPASS 4# OK OK OK5# OK OK OK6# OK OK OK14# OK OK OK15# OK OK OK19# OK OK OK20# OK OK OK21# OK OK OK22# OK OK OKACCELERATED LIFE TEST REPORTTest Item: Temperature Humidity TestRev. Date: 06/28/10Checker: Huzhengfang Tester: YaoyuanlongTest Condition:Temperature: 65±2℃Humidity: 93±2%RHDuration: 72HrsCriterion:All functional tests are to be conducted after this test to insure electrical and mechanical integrity remains.Maximum Output Power and Reference Sensitivity Level follow 3GPP TS34.121Test Equipment: (MCUSOL)ProcessStep 1 Put samples into the chamberStep2 SetparameterParametric data:BandTest Description Channel2#7#8#9#16#17#29#30#31#32#IMaximum Output Power 975021.621.521.721.521.121.722.421.622.121.4Reference Sensitivity Level -108.5-109.0-109.5-108.0-109.0-108.0 -108.5 -108.5-109.0-110.0IIMaximum Output Power 940021.921.221.521.221.123.1 21.1 22.522.622.1Reference Sensitivity Level -108.0-109.0-110.0-108.0-109.5-108.5 -108.5 -109.0-109.0-108.5VMaximum Output Power 417522.122.621.922.422.422.3 22.1 22.521.722.5Reference Sensitivity Level-108.5-108.5-110.0-108.5-109.0-108.5 -108.5 -108.5-109.5-109.0Result:Temperature HumiditySample NOFunctionAppearanceParametric Judge2# OK OK OK PASS7# OK OK OK 8# OKOK OK 9# OK OK OK 16# OK OK OK17# OK OK OK 29# OK OK OK 30# OK OK OK 31# OK OK OK 32# OKOKOKACCELERATED LIFE TEST REPORTTest Item: Low Temperature TestRev. Date:Checker: Huzhengfang Tester: Yaoyuanlong 06/15/10Test Condition:Temperature: -25±2℃Duration: 72HrsCriterion:All functional tests are to be conducted after this test to insure electrical and mechanical integrity remains.Maximum Output Power and Reference Sensitivity Level follow 3GPP TS34.121Test Equipment: (MCUSOL)The same as Temperature Humidity TestTesting over pictureTesting date: Parametric dataBandTestDescriptionChannel 3# 10#11#12#18#23# 24# 25#26#27#I MaximumOutput Power975021.921.821.721.821.622.1 21 22.321.821.8 ReferenceSensitivity Level-109.0 -108.5 -108.5 -108.5 -110.0 -109.0 -108.5 -107.0 -108.0 -108.5II MaximumOutput Power940021.52221.822.522.521.8 23.4 22.122.421.9 ReferenceSensitivity Level-108.5 -108.5 -110.0 -108.0 -109.5 -109.0 -108.0 -110.0 -108.5 -108.0V MaximumOutput Power417521.822.421.422.321.421.1 21.3 21.121.821.9 ReferenceSensitivity Level-108.5 -109.5 -107.5 -108.0 -110.0 -108.5 -110.0 -110.0 -107.5 -108.5Result:Low Temperature Test Sample NO Function Appearance Parametric Judge 3# OK OK OKPASS 10# OK OK OK11# OK OK OK12# OK OK OK18# OK OK OK23# OK OK OK24# OK OK OK25# OK OK OK26# OK OK OK27# OK OK OKACCELERATED LIFE TEST REPORTTest Item: High Temperature TestRev. Date: 07/14/10Checker: Huzhengfang Tester: YaoyuanlongTest Condition:Temperature: 60±2℃Duration: 72HrsCriterion:All functional tests are to be conducted after this test to insure electrical and mechanical integrity remains.Maximum Output Power and Reference Sensitivity Level follow 3GPP TS34.121Test Equipment: (MCUSOL)The same as Temperature Humidity TestTesting over pictureParametric Data:BandTestDescriptionChannel 3# 10#11#12#18#23# 24# 25#26#27#I MaximumOutput Power975021.921.821.721.621.622.1 21 22.32221.2 ReferenceSensitivity Level-109.0 -108.5 -108.5 -108.5 -110.0 -109.0 -108.5 -108.5 -108.0 -110.0II MaximumOutput Power940021.822.121.722.522.621.1 23.4 22.122.421.8 ReferenceSensitivity Level-108.5 -108.5 -110.0 -107.5 -109.0 -109.0 -108.0 -110.0 -108.5 -109.0V MaximumOutput Power417521.822.421.422.321.421.1 21.3 21.121.821.9 ReferenceSensitivity Level-108.5 -109.0 -107.5 -108.0 -110.0 -108.5 -110.0 -109.5 -107.5 -108.5Result:High Temperature Test Sample NO Function Appearance Parametric Judge 3# OK OK OKPASS 10# OK OK OK11# OK OK OK12# OK OK OK18# OK OK OK23# OK OK OK24# OK OK OK25# OK OK OK26# OK OK OK27# OK OK OKACCELERATED LIFE TEST REPORTTest Item: Second Drop TestRev. Date: 09/20/10Checker: Huzhengfang Tester: Yaoyuanlong Test Condition:SecondDrop SequenceDescription Units50℃/90%RHRandom Drop (Hand)4,5,6,7,8,9,10,11－10℃ Random Drop－10℃(Hand)P1,P2,P3,P4,P5,P6,P7,P8 Room TemperatureRandom Drop (Hand)19,20,21,22,23,24,25,26 50℃/90%RHMachine Surface Drop12,13,16,17－10℃Machine Surface Drop18，27，P9,P10Produce Status During TestThe soak time in the chamber is 30 minutes pior to drop，with a battery attached and the unit turned on. The units in the random drop will be dropped by hand, six times, once on each plane. Commence within 30 seconds of the time product is removed from the temperature chamber and finish within 3 minutes. Drop height is to be 5ft. The drop surface will be a tiled concrete for the random drop by hand and ½” steel on tiled concrete for the machine surface drop.Criterion:Batteries and covers may detach during drop, but the units must power on once the batteries and covers have been replaced. At each drop plane the product is given a cursory check of operation. This cursory check should include powering on the radio and verifying as much functionality as possible in the time provided. Post drop functional and signaling testing is conducted to insure no electrical degradation is evident and no mechanical failures such as cracking, chipping, separation, bent or broken contacts, etc. have occurred. Electrical and mechanical integrity should be maintained.Test equipment: (MCUSOL)The same as First Drop TestProcessPart 1 50℃/90%RH Random Drop (Hand)Testing data:SampleNOfront Back left right top bottom Remark4#OK OKsmall gap OK OK OKGap in acceptrange5#OK OKOK OKsmall gap OKGap in acceptrange6# OK OK OK OK OK OK N/A 7# OK OK OK Power off OK OK in accept range8# OK OK OK OK OK OK N/A9# OK Power off OK OK OK OK in accept range10# OK OK OK OK OK OK N/A 11# OK OK OK OK OK OK N/AAfter drop test picture (small gap)Part 2 －10℃Random Drop (Hand)Testing data:Sample NO front Back left right top bottom Remark P1# OKOKOK OK OK OK N/A P2# OKOKOK OKPower off OK It can accept P3# OKOKOK OK OK OK N/A P4# OKOKOK OK OK OK N/A P5# OKOKOKlens crack OK OK It can accept P6# Power off OK OK OK OK OK It can acceptP7# OKOKOK OK OK OK N/A P8# OKOKOK OKPower off OK It can acceptAfter drop test picture (lens crack)Part 3 Room Temperature Random Drop (Hand) 24.8℃72% R.HTesting data:front Back left right top bottom Remark SampleNO19# OKPower off OK OK OK OK N/A 20# OK OK OK OK OK OK N/A21# OK OK OK OK OK OK N/A22# OK OK OK OK OK OK N/A23# OK OK OK OK OK OK N/A24# OK OK OK OK OK OK N/A25# OK OK OK OK PowerOK N/Aoff26# OK OK OK OK OK OK N/A Part 4 50℃/90%R.H Machine Surface DropTesting data:NO front Back left right top bottom Remark12# OK OK OK OK OK OK N/A13# OK OK OK OK OK OK N/A16# OK OK OK OK OK OK N/A17# OK OK OK OK OK OK N/A Part 5 －10℃ Machine Surface DropTesting data:front Back left right top bottom Remark SampleNO18# OK OK OK OK OK OK N/A27# OK OK OK OK OK OK N/AP9# OK OK OK OK OK OK N/AP10# OK OK OK OK OK OK N/ATesting Data:(Second Drop Sequence) After Second Drop Test Parametric Data:Result:Second Drop Test SampleNOFunction Appearance/ME Parametric Judge 4# OK OK OKPass 5# OK OK OK6# OK OK OK7# OK OK OK8# OK OK OK9# OK OK OK10# OK OK OK11# OK OK OK12# OK OK OK13# OK OK OK16# OK OK OK17# OK OK OK18# OK OK OK19# OK OK OK20# OK OK OK21# OK OK OK22# OK OK OK23# OK OK OK24# OK OK OK25# OK OK OK26# OK OK OK27# OK OK OKP1# OK OK OKP2# OK OK OKP3# OK OK OKP4 OK OK OKP5 OK OK OKP6 OK OK OKP7 OK OK OKP8# OK OK OKP9 OK OK OKP10# OK OK OKACCELERATED LIFE TEST REPORTTest Item: Package Vibrate TestRev. Date: 06/10/10Checker: Huzhengfang Tester: YaoyuanlongTest Condition:Frequency ：(1) 5~20 Hz, (2)20~ 500 HzAcceleration: (1) 0.96m 2/s3, (2)0.96m 2 /s3,–3dBDuration: X，Y，Z ,60min/spindleplane UnitsX P1,P2,P3,P4,P5,P6,P7,P8,P9,P10Y P1,P2,P3,P4,P5,P6,P7,P8,P9,P10Z P1,P2,P3,P4,P5,P6,P7,P8,P9,P10Criterion:After Package Vibrate Test, Open package and check sample. The sample should be free of functional and signaling failures after the stress. Package and sample Appearance must is ok.Test equipment:Set parameterOpen package and checkParametric dataAfter Test Result P1#P2# P3# P4# P5# P6# P7# P8# P9# P10# Functional test OK OK OK OK OK OK OK OK OK OK Structural Check OK OK OK OK OK OK OK OK OK OK Appearance Check OK OK OK OK OK OK OK OK OK OKRF Test Band Test DescriptionChannelP1#P2# P3# P4# P5# P6# P7# P8# P9#P10# IMaximum OutputPower975021.421.621.921.122.2 21.8 22.5 21.322.521.4ReferenceSensitivity Level-107.5-108.5 -108.5 -109.0 -108.0 -110.0 -108.5 -108.5 -109.0109.5 IIMaximum OutputPower940022.621.521.621.123.121.8 21.3 22.522.622.5ReferenceSensitivity Level-108.5-108.0 -108.5 -109.5 -108.5 -109.5 -108.5 -109.0 -109.0-109.0 VMaximum OutputPower417522.421.922.622.422.321.6 22.1 22.521.722.4ReferenceSensitivity Level-108.5-108.0 -108.5 -109.0 -108.5 109.0 -109.0 -109.0 -109.5109.5Result:Package Vibrate Test SampleNOFunction Appearance/ME Parametric Judge P1# OK OK OKPass P2# OK OK OKP3# OK OK OKP4# OK OK OKP5# OK OK OKP6# OK OK OKP7# OK OK OKP8# OK OK OKP9# OK OK OKP10# OK OK OKACCELERATED LIFE TEST REPORTTest Item: Package Drop TestRev. Date: 06/10/10Checker: Huzhengfang Tester: YaoyuanlongTest Condition:Height: 76 cmFloor: concrete floorDirection: 6faces，1corner， 3edgesCriterion:Post drop functional, ME and signaling testing is conducted to insure no electrical degradation is evident and no mechanical failures such as cracking, chipping, separation, bent or broken contacts, etc.Parametric dataAfter Test Result P1#P2#P3#P4#P5#P6#P7# P8# P9#P10# Functional test OK OK OK OK OK OK OK OK OK OK Structural Check OK OK OK OK OK OK OK OK OK OK Appearance Check OK OK OK OK OK OK OK OK OK OKRF Test Band Test Description Channel P1#P2#P3#P4#P5#P6#P7# P8# P9#P10# IMaximum Output Power975021.321.721.921.122.0 21.9 22.4 21.3 22.521.4Reference Sensitivity Level -107.5 -108.5 -108.5 -109.0 -108.0 -110.0 -108.5 -108.5 -109.0 -110.0 IIMaximum Output Power940022.721.521.621.123.121.9 21.3 22.5 22.622.5Reference Sensitivity Level -108.5 -108.0 -108.5 -109.5 -108.5 -109.5 -108.5 -109.0 -109.0 -109.0 VMaximum Output Power417522.421.822.522.422.321.6 22.1 22.5 21.722.4Reference Sensitivity Level -108.5 -108.0 -108.5 -109.0 -108.5 109.0 -108.5 -108.5 -109.5 109.5Result:Package Drop Test SampleNOFunction Appearance/ME Parametric Judge P1# OK OK OKPass P2# OK OK OKP3# OK OK OKP4# OK OK OKP5# OK OK OKP6# OK OK OKP7# OK OK OKP8# OK OK OKP9# OK OK OKP10# OK OK OKACCELERATED LIFE TEST REPORTTest Item: Mechanical Lift SequenceACCELERATED LIFE TEST REPORTTest Item: Squeeze TestRev. Date: 06/16/10Checker: HuzhengfangTester : YaoyuanlongTest Condition:This test should be performed after the Thermal Environmental. Frequency ：1~3 cycles/min Force ：45~50 p.s.iTest cycles ：1000cyclesThe units need not be powered during test but batteries should be in place along with a battery door if applicable.Criterion:Full functional and Appearance tests are to be conducted after this test. There should be no outwardly visible signs of electrical or mechanical failure.Testing over picture :Process: Squeeze SampleResult:Squeeze TestSample NOAppearance/ME Function Judge28# OK OKPass29#OK OK。
test report template
Serial number：_________________ Name of the test reportmodify recordcontentmodify record ........................................................................................................ 错误！未定义书签。
content ................................................................................................................... 错误！未定义书签。
preface ................................................................................................................... 错误！未定义书签。
1.background .................................................................................................... 错误！未定义书签。
2.purpose/goal (4)3.according (refer)standard (according need）* (4)4.summary of test project (according need）* (4)5.the overall conclusion ........................................................................................ 错误！未定义书签。
TEST REPORT
TEST REPORTCLIENT:Artistic Toy Manufacturing,Inc REPORT NO: B20010861 ADDRESS ： 1405 S.Albert St, Allentown., Pennsylvania 18103,UnitedStatesDATE:April 11, 2008***************************************** Page 1 of 4******************************************This letter / report / certificate shall not be reproduced (except in full version) without the written approval of the Specialized Technology Resources (Shanghai) Ltd. (“STR”)LETTERS / REPORTS / CERTIFICATES: Letters / Reports / Certificates of STR are issued for the exclusive use of the Customer to whom they are addressed. No quotation from reports / certificates or use of the STR’s name is permitted except by STR’s express written authorization. Letters / reports / certificates apply only to the specific materials, products or processes tested, examined or surveyed and are not necessarily indicative of the qualities of apparently identical or similar materials, products or processes. Reports / Certificates of STR do not relieve sellers / suppliers from their contractual responsibilities with regard to the quality / quantity of the goods in delivery nor do they prejudice the Customer’s right to claim against sellers / suppliers for compensation for any apparent and/or hidden defects not detected during STR’s random inspection or testing or audit. The liability of STR to the Customer in contract, tort (including negligence or breach of statutory duty) or howsoever, and whatever the cause thereof, (a) for any loss of profit, business, contracts, revenues, or anticipating savings; or (b) for any special indirect or consequential damage of any nature whatsoever, shall be limited to the amount of the fee paid in respect of the specific Work(s) which give rise to such claim. For Reports / Certificates, see reverse for Terms and Conditions of Service. Attn: James L.Socci Cclist: Laurie Pauze-Strus Sample Description: Submitted 4 pieces of “8’ New Elsie Cow” Buyer Artistic Toy Manufacturing,Inc Supplier: Not provided P/O No.: Not provided Project No.: 31018 Style/Item Not provided SKU No.: Not provided Labeled Age Grading: Not provided Exported To: U.S.A Country of Origin: China Date(s) of samples received: April 3, 2008 Date(s) of test(s) conducted: April 3-11, 2008Test Method & Results:Please refer to next page(s) Conclusion:ASTM F963-07 e1 / 16 CFR 1500 Physical & Mechanical Requirements Pass ASTM F963-07 e1 / 16 CFR 1500.3 ©(6)(vi) Flammability Requirements Pass ASTM F963-07 e1 Section 4.3.5.1/16CFR 1303 Total Lead Content Test PassASTM F963-07 e1 Section 4.3.5.2 Soluble Migrated ElementsNot Applicable ASTM F963-07 e1 Section 4.3.7 / Chapter 16, 945.75 of AOAC 16th edition: Stuffing Cleanliness Test: PassFor and on behalf of ：Specialized Technology Resources (Shanghai) Ltd.TEST REPORTCLIENT:Artistic Toy Manufacturing,Inc REPORT NO: B20010861 ADDRESS ： 1405 S.Albert St, Allentown., Pennsylvania 18103,UnitedStatesDATE:April 11, 2008***************************************** Page 2 of 4******************************************This letter / report / certificate shall not be reproduced (except in full version) without the written approval of the Specialized Technology Resources (Shanghai) Ltd. (“STR”)LETTERS / REPORTS / CERTIFICATES: Letters / Reports / Certificates of STR are issued for the exclusive use of the Customer to whom they are addressed. No quotation from reports / certificates or use of theSTR’s name is permitted except by STR’s express written authorization. Letters / reports / certificates apply only to the specific materials, products or processes tested, examined or surveyed and are not necessarily indicative of the qualities of apparently identical or similar materials, products or processes. Reports / Certificates of STR do not relieve sellers / suppliers from their contractual responsibilities with regard to the quality / quantity of the goods in delivery nor do they prejudice the Customer’s right to claim against sellers / suppliers for compensation for any apparent and/or hidden defects not detected during STR’s random inspection or testing or audit. The liability of STR to the Customer in contract, tort (including negligence or breach of statutory duty) or howsoever, and whatever the cause thereof, (a) for any loss of profit, business, contracts, revenues, or anticipating savings; or (b) for any special indirect or consequential damage of any nature whatsoever, shall be limited to the amount of the fee paid in respect of the specific Work(s) which give rise to such claim. For Reports / Certificates, see reverse for Terms and Conditions of Service.TEST RESULTS:1.1 MECHANICAL AND PHYSICAL TEST OF THE MOST STRINGENT REQUIREMENTS OFTHE FOLLOWING STANDARDS:A) ASTM F963-07 e1 B) 16 CFR The following clauses are identified to be applicable: Tested Age grading: For all ages Sample size: 2 piece(s) × 1 style(s)A) B) Test Items Assessment 4.1 Material Quality Pass 4.6 1501 Small Objects Pass 4.9 1500.48 Accessible PointsPass 4.28 Stuffed and Beanbag-type Toys Pass 5.1Federal Government RequirementsPass 7Producer’s MarkingsPass 1500.121 Labeling requirements, prominence, placement, and conspicuousness Pass1500.52Bite TestPass1.2 FLAMMABILITY TEST TO ASTM F963-07 e1 Annex A4 / 16 CFR 1500.44 defined under 16 CFR 1500.3 section (c) (6) (vi) Sample size: 2 piece(s) × 1 style(s) Requirement: Burning rate should not exceed 0.1 inch per second along the major axis. Results: The burn rate of sample(s) was less than 0.1 inch per second.TEST REPORTCLIENT:Artistic Toy Manufacturing,Inc REPORT NO: B20010861 ADDRESS ： 1405 S.Albert St, Allentown., Pennsylvania 18103,UnitedStatesDATE:April 11, 2008***************************************** Page 3 of 4******************************************This letter / report / certificate shall not be reproduced (except in full version) without the written approval of the Specialized Technology Resources (Shanghai) Ltd. (“STR”)LETTERS / REPORTS / CERTIFICATES: Letters / Reports / Certificates of STR are issued for the exclusive use of the Customer to whom they are addressed. No quotation from reports / certificates or use of the STR’s name is permitted except by STR’s express written authorization. Letters / reports / certificates apply only to the specific materials, products or processes tested, examined or surveyed and are not necessarily indicative of the qualities of apparently identical or similar materials, products or processes. Reports / Certificates of STR do not relieve sellers / suppliers from their contractual responsibilities with regard to the quality / quantity of the goods in delivery nor do they prejudice the Customer’s right to claim against sellers / suppliers for compensation for any apparent and/or hidden defects not detected during STR’s random inspection or testing or audit. The liability of STR to the Customer in contract, tort (including negligence or breach of statutory duty) or howsoever, and whatever the cause thereof, (a) for any loss of profit, business, contracts, revenues, or anticipating savings; or (b) for any special indirect or consequential damage of any nature whatsoever, shall be limited to the amount of the fee paid in respect of the specific Work(s) which give rise to such claim. For Reports / Certificates, see reverse for Terms and Conditions of Service.TEST RESULTS2. CHEMICAL TESTS: Key to sample(s): Sample 1 = BLACK WET PAINT FOR COATING Sample 2* = BLACK COATING Sample 3 = WHITE FIBER Sample 4 = WHITE PLASTIC BEAD*Test specimen less than 10 mg is not required to test the soluble migrated elements according to ASTM F963-07 e1 Section 4.3.5.2 & 8.3. 2.1 TOTAL LEAD CONTENT TEST : IN-HOUSE METHOD SHC-002 Criteria : The submitted sample(s) must not exceed the Total Lead Limit of 600ppm as stated in16CFR 1303& ASTM F963-07 e1 Section 4.3.5.1.Results :Sample 1 Total Lead <50.0All concentrations expressed in ppm (parts per million)"<" means "less than"2.2 STUFFING CLEANLINESS TEST (ASTM F963-07 e1 Section 4.3.7 / Chapter 16, 945.75 of AOAC16th edition)Criteria : Heavy filth, light filth and sieved filth should not be found from samples tested bysedimentation, flotation and wet sieving respectively.Sample 3 : White Fiber Result : No apparent heavy filth was found. No apparent light filth was found No apparent sieved filth was found Sample 4 : White plastic bead Result : No apparent heavy filth was found. No apparent light filth was found No apparent sieved filth was foundTEST REPORTCLIENT:Artistic Toy Manufacturing,Inc REPORT NO: B20010861 ADDRESS ： 1405 S.Albert St, Allentown., Pennsylvania 18103,UnitedStatesDATE:April 11, 2008***************************************** Page 4 of 4******************************************This letter / report / certificate shall not be reproduced (except in full version) without the written approval of the Specialized Technology Resources (Shanghai) Ltd. (“STR”)LETTERS / REPORTS / CERTIFICATES: Letters / Reports / Certificates of STR are issued for the exclusive use of the Customer to whom they are addressed. No quotation from reports / certificates or use of the STR’s name is permitted except by STR’s express written authorization. Letters / reports / certificates apply only to the specific materials, products or processes tested, examined or surveyed and are not necessarily indicative of the qualities of apparently identical or similar materials, products or processes. Reports / Certificates of STR do not relieve sellers / suppliers from their contractual responsibilities with regard to the quality / quantity of the goods in delivery nor do they prejudice the Customer’s right to claim against sellers / suppliers for compensation for any apparent and/or hidden defects not detected during STR’s random inspection or testing or audit. The liability of STR to the Customer in contract, tort (including negligence or breach of statutory duty) or howsoever, and whatever the cause thereof, (a) for any loss of profit, business, contracts, revenues, or anticipating savings; or (b) for any special indirect or consequential damage of any nature whatsoever, shall be limited to the amount of the fee paid in respect of the specific Work(s) which give rise to such claim. For Reports / Certificates, see reverse for Terms and Conditions of Service.Product Photo********* THE END *********APPENDIX 1 - TERMS AND CONDITIONS OF SERVICE / 附件一附件一︰服务所依据的条款服务所依据的条款服务所依据的条款和条件和条件和条件Specialized Technology Resources (Shanghai) Ltd. (“STR”) undertakes to provide services to its Customer subject to the terms and conditions contained herein. 上海胜邦质量检测有限公司（“乙方”）承诺根据以下所列的条款向客戶(“甲方”)提供服务。
英文版检验报告
1.6 (4)
CONSTRUCTION
1.6 (4.2)
Components replaceable without difficulty
1.6 (4.3)
Wire ways smooth and free from sharp edges
1.6 (4.4)
Lampholders
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
List of test equipment must be kept on file and available for review.
Caps and bases correctly used
1.6 (4.5)
Starter holders
Starter holder in luminaires other than class II
Starter holder class II construction
1.6 (4.6)
Terminal blocks
1.6 (4.4.5)
Peak pulse voltage
1.6 (4.4.6)
Centre contact
1.6 (4.4.7)
Parts in rough service luminaires resistance to tracking
1.6 (4.4.8)
Lamp connectors