毕业设计英文翻译
毕业设计外文翻译译文
1 工程概论1.1 工程专业1.2 工业和技术1.3 现代制造业工程专业1 工程行业是历史上最古老的行业之一。
如果没有在广阔工程领域中应用的那些技术，我们现在的文明绝不会前进。
第一位把岩石凿削成箭和矛的工具匠是现代机械工程师的鼻祖。
那些发现地球上的金属并找到冶炼和使用金属的方法的工匠们是采矿和冶金工程师的先祖。
那些发明了灌溉系统并建造了远古世纪非凡的建筑物的技师是他们那个时代的土木工程师。
2 工程一般被定义为理论科学的实际应用，例如物理和数学。
许多早期的工程设计分支不是基于科学而是经验信息，这些经验信息取决于观察和经历，而不是理论知识。
这是一个倾斜面实际应用的例子，虽然这个概念没有被确切的理解，但是它可以被量化或者数字化的表达出来。
3 从16、17世纪当代初期，量化就已经成为科学知识大爆炸的首要原因之一。
另外一个重要因素是实验法验证理论的发展。
量化包含了把来源于实验的数据和信息转变成确切的数学术语。
这更加强调了数学是现代工程学的语言。
4 从19世纪开始，它的结果的实际而科学的应用已经逐步上升。
机械工程师现在有精确的能力去计算来源于许多不同机构之间错综复杂的相互作用的机械优势。
他拥有能一起工作的既新型又强硬的材料和巨大的新能源。
工业革命开始于使用水和蒸汽一起工作。
从此使用电、汽油和其他能源作动力的机器变得如此广泛以至于它们承担了世界上很大比例的工作。
5 科学知识迅速膨胀的结果之一就是科学和工程专业的数量的增加。
到19世纪末不仅机械、土木、矿业、冶金工程被建立而且更新的化学和电气工程专业出现了。
这种膨胀现象一直持续到现在。
我们现在拥有了核能、石油、航天航空空间以及电气工程等。
每种工程领域之内都有细分。
6 例如，土木工程自身领域之内有如下细分：涉及永久性结构的建筑工程、涉及水或其他液体流动与控制系统的水利工程、涉及供水、净化、排水系统的研究的环境工程。
机械工程主要的细分是工业工程，它涉及的是错综复杂的机械系统，这些系统是工业上的，而非单独的机器。
毕业设计论文外文文献翻译
毕业设计(论文）外文文献翻译院系：财务与会计学院年级专业：201＊级财务管理姓名:学号：132148*＊*附件: 财务风险管理【Abstract】Although financial risk has increased significantly in recent years risk and risk management are not contemporary issues。
The result of increasingly global markets is that risk may originate with events thousands of miles away that have nothing to do with the domestic market。
Information is available instantaneously which means that change and subsequent market reactions occur very quickly。
The economic climate and markets can be affected very quickly by changes in exchange rates interest rates and commodity prices。
Counterparties can rapidly become problematic。
As a result it is important to ensure financial risks are identified and managed appropriately. Preparation is a key component of risk management。
【Key Words】Financial risk，Risk management，YieldsI. Financial risks arising1.1What Is Risk1.1.1The concept of riskRisk provides the basis for opportunity. The terms risk and exposure have subtle differences in their meaning. Risk refers to the probability of loss while exposure is the possibility of loss although they are often used interchangeably。
毕业设计中英文翻译
Bridge Waterway OpeningsIn a majority of cases the height and length of a bridge depend solely upon the amount of clear waterway opening that must be provided to accommodate the floodwaters of the stream. Actually, the problem goes beyond that of merely accommodating the floodwaters and requires prediction of the various magnitudes of floods for given time intervals. It would be impossible to state that some given magnitude is the maximum that will ever occur, and it is therefore impossible to design for the maximum, since it cannot be ascertained. It seems more logical to design for a predicted flood of some selected interval ---a flood magnitude that could reasonably be expected to occur once within a given number of years. For example, a bridge may be designed for a 50-year flood interval; that is, for a flood which is expected (according to the laws of probability) to occur on the average of one time in 50 years. Once this design flood frequency, or interval of expected occurrence, has been decided, the analysis to determine a magnitude is made. Whenever possible, this analysis is based upon gauged stream records. In areas and for streams where flood frequency and magnitude records are not available, an analysis can still be made. With data from gauged streams in the vicinity, regional flood frequencies can be worked out; with a correlation between the computed discharge for the ungauged stream and the regional flood frequency, a flood frequency curve can be computed for the stream in question. Highway CulvertsAny closed conduit used to conduct surface runoff from one side of a roadway to the other is referred to as a culvert. Culverts vary in size from large multiple installations used in lieu of a bridge to small circular or elliptical pipe, and their design varies in significance. Accepted practice treats conduits under the roadway as culverts. Although the unit cost of culverts is much less than that of bridges, they are far more numerous, normally averaging about eight to the mile, and represent a greater cost in highway. Statistics show that about 15 cents of the highway construction dollar goes to culverts, as compared with 10 cents for bridge. Culvert design then is equally as important as that of bridges or other phases of highway and should be treated accordingly.Municipal Storm DrainageIn urban and suburban areas, runoff waters are handled through a system of drainage structures referred to as storm sewers and their appurtenances. The drainage problem is increased in these areas primarily for two reasons: the impervious nature of the area creates a very high runoff; and there is little room for natural water courses. It is often necessary to collect the entire storm water into a system of pipes and transmit it over considerable distances before it can be loosed again as surface runoff. This collection and transmission further increase the problem, since all of the water must be collected with virtually no ponding, thus eliminating any natural storage; and though increased velocity the peak runoffs are reached more quickly. Also, the shorter times of peaks cause the system to be more sensitive to short-duration, high-intensity rainfall. Storm sewers, like culverts and bridges, are designed for storms of various intensity –return-period relationship, depending upon the economy and amount of ponding that can be tolerated.Airport DrainageThe problem of providing proper drainage facilities for airports is similar in many ways to that of highways and streets. However, because of the large and relatively flat surface involved the varying soil conditions, the absence of natural water courses and possible side ditches, and the greater concentration of discharge at the terminus of the construction area, some phases of the problem are more complex. For the average airport the overall area to be drained is relatively large and an extensive drainage system is required. The magnitude of such a system makes it even more imperative that sound engineeringprinciples based on all of the best available data be used to ensure the most economical design. Overdesign of facilities results in excessive money investment with no return, and underdesign can result in conditions hazardous to the air traffic using the airport.In other to ensure surfaces that are smooth, firm, stable, and reasonably free from flooding, it is necessary to provide a system which will do several things. It must collect and remove the surface water from the airport surface; intercept and remove surface water flowing toward the airport from adjacent areas; collect and remove any excessive subsurface water beneath the surface of the airport facilities and in many cases lower the ground-water table; and provide protection against erosion of the sloping areas. Ditches and Cut-slope DrainageA highway cross section normally includes one and often two ditches paralleling the roadway. Generally referred to as side ditches these serve to intercept the drainage from slopes and to conduct it to where it can be carried under the roadway or away from the highway section, depending upon the natural drainage. To a limited extent they also serve to conduct subsurface drainage from beneath the roadway to points where it can be carried away from the highway section.A second type of ditch, generally referred to as a crown ditch, is often used for the erosion protection of cut slopes. This ditch along the top of the cut slope serves to intercept surface runoff from the slopes above and conduct it to natural water courses on milder slopes, thus preventing the erosion that would be caused by permitting the runoff to spill down the cut faces.12 Construction techniquesThe decision of how a bridge should be built depends mainly on local conditions. These include cost of materials, available equipment, allowable construction time and environmental restriction. Since all these vary with location and time, the best construction technique for a given structure may also vary. Incremental launching or Push-out MethodIn this form of construction the deck is pushed across the span with hydraulic rams or winches. Decks of prestressed post-tensioned precast segments, steel or girders have been erected. Usually spans are limited to 50～60 m to avoid excessive deflection and cantilever stresses , although greater distances have been bridged by installing temporary support towers . Typically the method is most appropriate for long, multi-span bridges in the range 300 ~ 600 m ,but ,much shorter and longer bridges have been constructed . Unfortunately, this very economical mode of construction can only be applied when both the horizontal and vertical alignments of the deck are perfectly straight, or alternatively of constant radius. Where pushing involves a small downward grade (4% ~ 5%) then a braking system should be installed to prevent the deck slipping away uncontrolled and heavy bracing is then needed at the restraining piers.Bridge launching demands very careful surveying and setting out with continuous and precise checks made of deck deflections. A light aluminum or steel-launching nose forms the head of the deck to provide guidance over the pier. Special teflon or chrome-nickel steel plate bearings are used to reduce sliding friction to about 5% of the weight, thus slender piers would normally be supplemented with braced columns to avoid cracking and other damage. These columns would generally also support the temporary friction bearings and help steer the nose.In the case of precast construction, ideally segments should be cast on beds near the abutments and transferred by rail to the post-tensioning bed, the actual transport distance obviously being kept to the minimum. Usually a segment is cast against the face of the previously concerted unit to ensure a good fit when finally glued in place with an epoxy resin. If this procedure is not adopted , gaps of approximately 500mm shold be left between segments with the reinforcements running through andstressed together to form a complete unit , but when access or space on the embankment is at a premium it may be necessary to launch the deck intermittently to allow sections to be added progressively .The correponding prestressing arrangements , both for the temporary and permanent conditions would be more complicated and careful calculations needed at all positions .The pricipal advantage of the bridge-launching technique is the saving in falsework, especially for high decks. Segments can also be fabricated or precast in a protected environment using highly productive equipment. For concrete segment, typically two segment are laid each week (usually 10 ~ 30 m in length and perhaps 300 to 400 tonnes in weight) and after posttensioning incrementally launched at about 20 m per day depending upon the winching/jacking equipment.Balanced Cantiulever ConstructionDevelopment in box section and prestressed concrete led to short segment being assembled or cast in place on falsework to form a beam of full roadway width. Subsequently the method was refined virtually to eliminate the falsework by using a previously constructed section of the beam to provide the fixing for a subsequently cantilevered section. The principle is demonsrated step-by-step in the example shown in Fig.1.In the simple case illustrated, the bridge consists of three spans in the ratio 1:1:2. First the abutments and piers are constructed independently from the bridge superstructure. The segment immediately above each pier is then either cast in situ or placed as a precast unit .The deck is subsequently formed by adding sections symmetrically either side.Ideally sections either side should be placed simultaneously but this is usually impracticable and some inbalance will result from the extra segment weight, wind forces, construction plant and material. When the cantilever has reached both the abutment and centre span,work can begin from the other pier , and the remainder of the deck completed in a similar manner . Finally the two individual cantilevers are linked at the centre by a key segment to form a single span. The key is normally cast in situ.The procedure initially requires the first sections above the column and perhaps one or two each side to be erected conventionally either in situ concrete or precast and temporarily supported while steel tendons are threaded and post-tensioned . Subsequent pairs of section are added and held in place by post-tensioning followed by grouting of the ducts. During this phase only the cantilever tendons in the upper flange and webs are tensioned. Continuity tendons are stressed after the key section has been cast in place. The final gap left between the two half spans should be wide enough to enable the jacking equipment to be inserted. When the individual cantilevers are completed and the key section inserted the continuity tendons are anchored symmetrically about the centre of the span and serve to resist superimposed loads, live loads, redistribution of dead loads and cantilever prestressing forces.The earlier bridges were designed on the free cantilever principle with an expansion joint incorporated at the center .Unfortunately，settlements , deformations , concrete creep and prestress relaxation tended to produce deflection in each half span , disfiguring the general appearance of the bridge and causing discomfort to drivers .These effects coupled with the difficulties in designing a suitable joint led designers to choose a continuous connection, resulting in a more uniform distribution of the loads and reduced deflection. The natural movements were provided for at the bridge abutments using sliding bearings or in the case of long multi-span bridges, joints at about 500 m centres.Special Requirements in Advanced Construction TechniquesThere are three important areas that the engineering and construction team has to consider:(1) Stress analysis during construction: Because the loadings and support conditions of the bridge are different from the finished bridge, stresses in each construction stage must be calculated to ensurethe safety of the structure .For this purpose, realistic construction loads must be used and site personnel must be informed on all the loading limitations. Wind and temperature are usually significant for construction stage.(2) Camber: In order to obtain a bridge with the right elevation, the required camber of the bridge at each construction stage must be calculated. It is required that due consideration be given to creep and shrinkage of the concrete. This kind of the concrete. This kind of calculation, although cumbersome, has been simplified by the use of the compiters.(3) Quality control: This is important for any method construction, but it is more so for the complicated construction techniques. Curing of concrete, post-tensioning, joint preparation, etc. are detrimental to a successful structure. The site personnel must be made aware of the minimum concrete strengths required for post-tensioning, form removal, falsework removal, launching and other steps of operations.Generally speaking, these advanced construction techniques require more engineering work than the conventional falsework type construction, but the saving could be significant.大桥涵洞在大多数情况中桥梁的高度和跨度完全取决于河流的流量，桥梁的高度和跨度必须能够容纳最大洪水量.事实上，这不仅仅是洪水最大流量的问题,还需要在不同时间间隔预测不同程度的水灾。
本科毕业设计外文文献翻译
（Sheaｒ waｌl ｓt ｒuctural desigｎ ofh ｉgh-ｌev ｅl fr ａmeworkＷｕ Jiche ｎgＡbstract ： In t ｈis pape ｒ the basic c ｏｎcepts of ｍａn ｐow ｅr ｆｒom th ｅ ｆra ｍｅ sh ｅａr w ａｌl str ｕc ｔｕｒｅ, analy ｓis of the ｓtruct ｕr ａｌ des ｉgn ｏf th ｅ c ｏnt ｅnt ｏｆ t ｈe fr ａme she ａr wall, in ｃｌudi ｎg the ｓeism ｉc wa ｌl she ａr spa本科毕业设计外文文献翻译学校代码： 10128学 号：题 目：Shear wall structural design of high-level framework 学生姓名： 学 院：土木工程学院 系 别：建筑工程系 专 业：土木工程专业（建筑工程方向） 班 级：土木08-（5）班 指导教师： (副教授)ｎratiｏdesign, ａnd a concrｅtｅｓtruｃtuｒe in thｅmｏst co ｍmonｌy useｄframe shear walｌstｒｕcturｅtｈｅdesign of p ｏiｎｔs to note.Keyworｄs: cｏncrｅｔｅ; fｒaｍｅshｅａｒwall sｔｒucｔｕre；hiｇh－risｅbuildｉｎｇsThe wall is aｍoｄern high－rｉｓe buiｌdiｎgs is an iｍpo ｒｔant buiｌdinｇconｔｅnt, the ｓize of thｅfraｍe sheａr wall must comｐly with buildｉng reguｌａtｉons. The pｒｉnｃipｌe is ｔhat the largeｒsｉzｅbｕt the thｉｃknessｍuｓt ｂｅsmaller gｅoｍetric featｕrｅｓshoｕlｄｂe ｐｒeｓented ｔo the pｌatｅ,ｔｈe forｃe is close to cylｉndrｉcal.Ｔhe waｌl sｈｅar wa ｌl strｕｃｔure ｉs a flaｔcomｐonent. Itｓeｘposure to tｈe force aｌoｎg ｔhe ｐlane leｖｅl of theｒole ofｓｈear and momｅｎt, must also take ｉｎtｏａccounｔthe veｒｔical preｓsure.Opeｒate unｄer thｅcomｂiｎed actｉｏn oｆbenｄing momeｎts and axial force aｎｄsheａr forcｅbｙthe caｎtilｅｖｅr deep beａm uｎder ｔｈe acｔion of the force leveｌｔo lｏo ｋinto ｔｈe bottom mouｎted on ｔhe basｉs of. Sheaｒｗaｌl ｉｓdiｖidｅｄinｔo a whole walｌand ｔheａssoｃiated ｓｈeａr wall in thｅactual project,a wholｅwａlｌfor ｅxａmpl ｅ, suｃh as ｇenｅraｌhｏusiｎｇｃonstｒuction in tｈe gablｅｏr fish bｏne strｕcture ｆｉlｍwａｌls ａnd small opｅningｓwall.Cｏupled Sｈeａr ｗalls are ｃonnｅcted bｙｔhｅcｏupｌing ｂeam shｅａr wall.Buｔｂecause tｈeｇｅnerａlｃｏupling beaｍstｉｆfness is less thaｎｔhe wall stiｆfnｅsｓof the lｉmbs，ｓｏ. Wａlｌliｍb aｌonｅis obviｏus.The ｃｅntral beam of tｈeｉnflｅｃtion pｏｉnｔtｏpay aｔtenｔiｏｎto tｈeｗaｌl pressｕre thａn the limiｔs of the lｉmb axis. Will forｍa shortｗiｄe beａms，widｅcolｕmn wａll liｍｂｓhear wａll ｏpｅnings toｏlarge ｃomｐonｅnt aｔbothｅn ｄs ｗith jｕst the domain of vａｒiabｌe crosｓ－ｓecｔｉon ro ｄin ｔhe intｅrｎａｌforcｅｓｕnder tｈｅaｃtioｎof maｎy Ｗalｌlｉmb iｎflｅcｔion point Ｔhｅｒeｆoｒe, ｔhe cａｌcula ｔions ａｎd consｔruction sｈouldAccordinｇtｏappｒoxiｍａｔe tｈe framｅstｒucｔure to ｃonsideｒ.Tｈe desｉｇｎof ｓhｅａr walls ｓhoulｄbe based on the cｈａractｅrisｔics ｏf ａvａｒｉｅty oｆwall itseｌｆ,ａnd dｉfferｅnｔmeｃhanical ch ａrａcteｒisｔｉcｓand requireｍents,wall oｆthｅinternａｌforceｄistrｉbutｉon and failurｅmoｄｅs ｏf sｐecific and cｏmprehensive ｃonｓideration of the design rｅinｆorcemｅnt aｎd stｒuctural measｕres. Ｆrame sｈear wall ｓｔrｕctuｒe deｓiｇn is to cｏｎsider the ｓtructｕre of the oｖerall ａnａｌysis for ｂoｔh dｉrecｔｉｏｎsｏｆthｅhｏrｉzontal and vｅrtiｃalｅfｆects. Oｂtain thｅinternal force ｉs reｑuirｅd in ａccｏrdancｅｗｉｔｈtｈe bias or paｒtｉal ｐull normal sｅcｔｉon forｃｅｃaｌculatiｏn.The waｌl strｕcture oｆtheｆｒame sｈear ｗall ｓｔructural dｅsign of ｔhe coｎtent frame hｉgh-rise buildings, in ｔhe actual ｐrｏjeｃｔiｎｔhｅuse of thｅｍoｓt seisｍic ｗａlls have suffiｃient quantitｉeｓto meｅt ｔheｌｉmitsｏf the lａyer displacement, the loｃation iｓｒelａtiｖely flexiblｅ. Seiｓmic wａll for cｏntinuous layout，ｆulｌ-length ｔhroｕgh．Should bｅdesigned to avoid the waｌl mutaｔioｎs ｉn limb ｌｅｎgth and alignment is noｔuｐａnd down the ｈolｅ. The samｅtｉme．Tｈe inｓide of ｔhe hole marginｓcｏlｕｍｎshｏｕld not ｂｅｌｅssｔhan３00mm ｉｎordｅｒtｏguaraｎteｅtheｌengtｈof the colｕｍn ａs the edgｅof tｈe coｍponent and constｒａiｎt eｄgｅcｏｍponeｎts．Thｅbi-direc ｔiｏnal laｔerａl forｃe ｒesiｓting strucｔurａl fｏrm of verticａl aｎｄhorｉzontaｌwalｌcoｎnected.Eａｃh ｏｔhｅr as ｔhe ａffiｎiｔｙof the shｅar wall. Ｆor ｏnｅ, two seismic frａme sｈe ａr ｗalｌｓ,ｅｖen beam highｒatio ｓhould noｔgreateｒthan 5 aｎd a height of nｏt less thaｎ400mm.Midline colｕmnａnd beａmｓ,wall ｍｉdline shouｌdｎoｔbe greaｔer tha ｎthe ｃoｌｕmｎwidｔｈof1/4，ｉn ordｅr ｔｏreｄuce thｅtoｒsional eｆfect of the sｅiｓmｉｃacｔion ｏnｔｈｅｃolｕmn．Oｔhｅrwｉsｅcan be taken tｏstrengthｅn theｓtirruprａｔｉo iｎｔhe cｏlｕmn tｏmake ｕp.If thｅshear wａｌl sheａｒsｐａn ｔhａnｔhe ｂig twｏ. Ｅveｎthe beａｍcro ｓs-heｉｇht ratiｏgreateｒthan 2.5, ｔhen tｈe design presｓｕｒe ｏf thｅｃｕt shoulｄnoｔmａkｅａｂig 0.2. Howevｅｒ, ｉf the sheａｒwallｓheａr sｐａｎｒatiｏof ｌess than two couｐlinｇｂeａms sｐan of ｌeｓs than ２．5, then the shear coｍｐres ｓiｏn rａｔiｏis noｔgreaｔer thａn 0.15. Thｅｏther haｎｄ，ｔhe bｏttom oｆthe fraｍe ｓhｅar walｌstructure ｔo enhａnce tｈｅdｅsign sｈould ｎoｔbe leｓs thaｎ２０0mmａnd noｔlesｓthaｎstorey 1/１6，othｅｒｐaｒtｓｓhｏulｄnot be lｅss than 160mm ａnd ｎｏt ｌｅss thaｎｓtoｒey １/20. Arounｄthe wall of the frame ｓhｅar ｗall strucｔure sｈｏulｄbe set ｔo the beａm or dark bｅamａnd the sｉｄe columｎｔｏform a borｄｅr. Ｈoｒizｏntａl ｄｉｓtrｉbuｔioｎoｆsｈear waｌls cａn from the sheａr effect，tｈｉs design wｈen ｂuilｄｉng higｈｅr longeｒor fｒaｍｅｓtructｕre reinfoｒcｅment shｏuld be aｐprｏpｒiatelｙincｒeａｓed, ｅspｅcｉａlｌy in the sｅnｓitivｅｐarts of the beam pｏsition ｏr teｍperaｔuｒe, stiffnｅsｓchａnge is besｔappｒopriatｅly increased, ｔｈeｎcｏnsidｅration sｈoulｄbe ｇｉveｎｔo the wａlｌvertｉcaｌreiｎforｃemeｎt,becaｕse ｉt is mａinly fｒom the bｅnding efｆecｔ, aｎｄtake in ｓome ｍｕlti-ｓtorｅｙshｅａｒｗａll structuｒereinforcｅｄreｉnｆorceｍent rate -likｅlｅsｓconｓtｒained edgｅｏｆｔhｅcomｐonent or components reinforｃemeｎt of thｅedge ｃomｐｏnent.Referｅnces: [1 sad Hａyaｓhi,He Yaming. Ｏn the shorｔshｅar ｗall ｈigh-riｓe bｕilｄinｇｄesign ［J]．Kｅｙｕaｎ, 2008, (O2).高层框架剪力墙结构设计吴继成摘要: 本文从框架剪力墙结构设计的基本概念人手, 分析了框架剪力墙的构造设计内容, 包括抗震墙、剪跨比等的设计, 并出混凝土结构中最常用的框架剪力墙结构设计的注意要点。
毕业设计(论文)外文资料翻译(学生用)
毕业设计外文资料翻译学院：信息科学与工程学院专业：软件工程姓名： XXXXX学号： XXXXXXXXX外文出处： Think In Java (用外文写)附件： 1.外文资料翻译译文；2.外文原文。
附件1：外文资料翻译译文网络编程历史上的网络编程都倾向于困难、复杂，而且极易出错。
程序员必须掌握与网络有关的大量细节，有时甚至要对硬件有深刻的认识。
一般地，我们需要理解连网协议中不同的“层”（Layer）。
而且对于每个连网库，一般都包含了数量众多的函数，分别涉及信息块的连接、打包和拆包；这些块的来回运输；以及握手等等。
这是一项令人痛苦的工作。
但是，连网本身的概念并不是很难。
我们想获得位于其他地方某台机器上的信息，并把它们移到这儿；或者相反。
这与读写文件非常相似，只是文件存在于远程机器上，而且远程机器有权决定如何处理我们请求或者发送的数据。
Java最出色的一个地方就是它的“无痛苦连网”概念。
有关连网的基层细节已被尽可能地提取出去，并隐藏在JVM以及Java的本机安装系统里进行控制。
我们使用的编程模型是一个文件的模型；事实上，网络连接（一个“套接字”）已被封装到系统对象里，所以可象对其他数据流那样采用同样的方法调用。
除此以外，在我们处理另一个连网问题——同时控制多个网络连接——的时候，Java内建的多线程机制也是十分方便的。
本章将用一系列易懂的例子解释Java的连网支持。
15.1 机器的标识当然，为了分辨来自别处的一台机器，以及为了保证自己连接的是希望的那台机器，必须有一种机制能独一无二地标识出网络内的每台机器。
早期网络只解决了如何在本地网络环境中为机器提供唯一的名字。
但Java面向的是整个因特网，这要求用一种机制对来自世界各地的机器进行标识。
为达到这个目的，我们采用了IP（互联网地址）的概念。
IP以两种形式存在着：(1) 大家最熟悉的DNS（域名服务）形式。
我自己的域名是。
所以假定我在自己的域内有一台名为Opus的计算机，它的域名就可以是。
毕 业 设 计(英文翻译)
附录G：英文翻译参考（要求学生完成与论文有关的外文资料中文字数5000字左右的英译汉，旨在培养学生利用外文资料开展研究工作的能力，为所选课题提供前沿参考资料。
）毕业设计（英文翻译）题目系别：专业：班级：学生姓名：学号：指导教师：一位从事质量管理的人约瑟夫·朱兰出生于圣诞夜,1904 在罗马尼亚的喀尔巴阡山脉山中。
他青年时期的村庄中贫穷、迷信和反犹太主义甚是猖獗。
1912年朱兰家搬到了明尼阿波尼斯州，虽然充满了危险，但是它却让一个男孩充满信心和希望。
从如此多了一个在质量观念的世界最好改革者之一。
在他90年的生活中，朱兰一直是一个精力充沛的思想者倡导者，推动着传统的质量思想向前走。
因为九岁就被雇用,朱兰表示在他的生活工作上永不停止。
记者:技术方面如何讲质量?朱兰:技术有不同方面:一、当然是精密。
物的对精密的需求像电子学、化学…我们看来它们似乎需要放大来说,和重要的原子尘的有关于质量。
要做到高精密具有相当大的挑战，而且我们已经遇见非常大的挑战。
另外的一个方面是可信度－没有失败。
当我们举例来说建立一个系统，同类空中交通管制的时候,我们不想要它失败。
我们必须把可信度建入系统。
因为我们投入很大的资金并依赖这些系统，系统非常复杂，这是逐渐增加的。
除此之外,有对公司的失败费用。
如果事物在领域中意外失败,可以说，它影响民众。
但是如果他们失败在内部,然后它影响公司的费用,而且已经试着发现这些费用在哪里和该如何免除他们。
因此那些是相当大的因素:精密、可信度和费用。
还有其它的,当然，但是我认为这些是主要的一些。
记者:据说是质量有在美国变成一种产业的可能?朱兰:资讯科技当然有。
已经有大的变化。
在世纪中初期当质量的一个想法到一个检验部门的时候，这有了分开的工作，东西被做坏之后。
检验是相当易错的程序,实际上。
而且无论如何，资讯科技在那天中相当花时间，直到某事已经被认为是否资讯科技是正确的。
应该强调计划，如此它不被错误首先订定。
华南理工大学 毕业设计 外文翻译
华南理工大学本科毕业设计（论文）翻译班级土木工程三班姓名王剑锋学号 200930132042指导教师骆冠勇填表日期 2013年4月21日中文译名一种用于预测拉森钢板桩弯曲强度的数值模型外文原文名 A numerical model for predicting the bending strength of Larssen steel sheetpiles外文原文版出处Journal of Constructional Steel Research 58 (2002) 1361–1374译文：一种用于预测拉森钢板桩弯曲强度的数值模型R.J. Crawford, M.P. Byfield摘要拉森桩为U形横截面并通过可滑动的接头连接在一起组成码头岸壁，围堰，和其他类型的挡土墙。
由于滑动接头位于桩墙的中心线上，相互连接桩的桩间滑移可能导致桩墙70%的弯曲强度折减。
这种桩间滑移可以通过安装成对的带有卷曲的锁头的桩来部分阻止。
然而，像非卷曲桩一样弯曲强度很难被预测，因为这种联锁桩依然存在桩间滑移。
本文提出了一种用于预测联锁拉森桩弯曲应力以及压应力的数值方法。
通过测试1：6比例大小的铝制拉森桩微缩模型的数据与数值模型计算结果进行比较，结果表明数值模型所预测的应力与实际实验结果接近一致。
同时本数值模型也可用于钢板桩的设计生产，以达到使用最少的材料来达到最大的弯曲强度的目的。
C 2002爱思唯尔股份有限公司保留解释权利关键词：行业规范；组合结构；拉森桩；桩结构；挡土墙；钢结构1.介绍钢板桩被广泛运用于全世界。
工程上经常使用的两种钢板桩是U型拉森钢板桩和Z型钢板桩。
两种类型的钢板桩桩都是利用沿着构件长度方向的锁头连接成有缝的连续墙结构。
根据欧洲标准化委员会引入的欧3标准第五部分，U型钢板桩锁头连接部分的下滑位移的影响不能忽视（见图1 步骤1）。
如果钢板桩单肢的相对滑移严重，则钢板桩的弯曲强度会下降到整体强度的70%，我们将其称为钢板桩模量下降。
土木工程-毕业设计-论文-外文翻译-中英文对照
英文原文：Concrete structure reinforcement designSheyanb oⅠWangchenji aⅡⅠFoundation Engineering Co., Ltd. Heilongjiang DongyuⅡHeilongjiang Province, East Building Foundation Engineering Co., Ltd. CoalAbstract：structure in the long-term natural environment and under the use environment's function, its function is weaken inevitably gradually, our structural engineering's duty not just must finish the building earlier period the project work, but must be able the science appraisal structure damage objective law and the degree, and adopts the effective method guarantee structure the security use, that the structure reinforcement will become an important work. What may foresee will be the 21st century, the human building also by the concrete structure, the steel structure, the bricking-up structure and so on primarily, the present stage I will think us in the structure reinforcement this aspect research should also take this as the main breakthrough direction.Key word：Concrete structure reinforcement bricking-up structure reinforcement steel structure reinforcement1 Concrete structure reinforcementConcrete structure's reinforcement divides into the direct reinforcement and reinforces two kinds indirectly, when the design may act according to the actual condition and the operation requirements choice being suitable method and the necessary technology.1.1the direct reinforcement's general method1）Enlarges the section reinforcement lawAdds the concretes cast-in-place level in the reinforced concrete member in bending compression zone, may increase the section effective height, the expansion cross sectional area, thus enhances the component right section anti-curved, the oblique section anti-cuts ability and the section rigidity, plays the reinforcement reinforcement the role.In the suitable muscle scope, the concretes change curved the component right section supporting capacity increase along with the area of reinforcement and the intensity enhance. In the original component right section ratio of reinforcement not too high situation, increases the main reinforcement area to be possible to propose the plateau component right section anti-curved supporting capacity effectively. Is pulled in the section the area to add the cast-in-place concrete jacket to increase the component section, through new Canada partial and original component joint work, but enhances the component supporting capacity effectively, improvement normal operational performance.Enlarges the section reinforcement law construction craft simply, compatible, and has the mature design and the construction experience; Is suitable in Liang, the board, the column, the wall and the general structure concretes reinforcement; But scene construction's wet operating time is long, to produces has certain influence with the life, and after reinforcing the building clearance has certain reduction.2) Replacement concretes reinforcement lawThis law's merit with enlarges the method of sections to be close, and after reinforcing, does not affect building's clearance, but similar existence construction wet operating time long shortcoming; Is suitable somewhat low or has concretes carrier's and so on serious defect Liang, column in the compression zone concretes intensity reinforcement.3) the caking outsourcing section reinforcement lawOutside the Baotou Steel Factory reinforcement is wraps in the section or the steel plate is reinforced component's outside, outside the Baotou Steel Factory reinforces reinforced concrete Liang to use the wet outsourcing law generally, namely uses the epoxy resinification to be in the milk and so on methods with to reinforce the section the construction commission to cake a whole, after the reinforcement component, because is pulled with the compressed steel cross sectional area large scale enhancement, therefore right section supporting capacity and section rigidity large scale enhancement.This law also said that the wet outside Baotou Steel Factory reinforcement law, the stress is reliable, the construction is simple, the scene work load is small, but is big with the steel quantity, and uses in above not suitably 600C in the non-protection's situation the high temperature place; Is suitable does not allow in the use obviously to increase the original component section size, but requests to sharpen its bearing capacity large scale the concrete structure reinforcement.4) Sticks the steel reinforcement lawOutside the reinforced concrete member in bending sticks the steel reinforcement is (right section is pulled in the component supporting capacity insufficient sector area, right section compression zone or oblique section) the superficial glue steel plate, like this may enhance is reinforced component's supporting capacity, and constructs conveniently.This law construction is fast, the scene not wet work or only has the plastering and so on few wet works, to produces is small with the life influence, and after reinforcing, is not remarkable to the original structure outward appearance and the original clearance affects, but the reinforcement effect is decided to a great extent by the gummy craft and the operational level; Is suitable in the withstanding static function, and is in the normal humidity environment to bend or the tension member reinforcement.5) Glue fibre reinforcement plastic reinforcement lawOutside pastes the textile fiber reinforcement is pastes with the cementing material the fibre reinforcement compound materials in is reinforced the component to pull the region, causes it with to reinforce the section joint work, achieves sharpens the component bearing capacity the goal. Besides has glues the steel plate similar merit, but also has anticorrosive muddy, bears moistly, does not increase the self-weight of structure nearly, durably, the maintenance cost low status merit, but needs special fire protection processing, is suitable in each kind of stress nature concrete structure component and the general construction.This law's good and bad points with enlarge the method of sections to be close; Is suitable reinforcement which is insufficient in the concrete structure component oblique section supporting capacity, or must exert the crosswise binding force to the compressional member the situation.6) Reeling lawThis law's good and bad points with enlarge the method of sections to be close; Is suitable reinforcement which is insufficient in the concrete structure component oblique section supporting capacity, or must exert the crosswise binding force to the compressional member the situation.7) Fang bolt anchor lawThis law is suitable in the concretes intensity rank is the C20~C60 concretes load-bearing member transformation, the reinforcement; It is not suitable for already the above structure which and the light quality structure makes decent seriously. 1.2The indirect reinforcement's general method1)Pre-stressed reinforcement law(1)Thepre-stressed horizontal tension bar reinforces concretes member in bending,because the pre-stressed and increases the exterior load the combined action, in the tension bar has the axial tension, this strength eccentric transmits on the component through the pole end anchor (, when tension bar and Liang board bottom surface close fitting, tension bar can look for tune together with component, this fashion has partial pressures to transmit directly for component bottom surface), has the eccentric compression function in the component, this function has overcome the bending moment which outside the part the load produces, reduced outside the load effect, thus sharpened component's anti-curved ability. At the same time, because the tension bar passes to component's pressure function, the component crack development can alleviate, the control, the oblique section anti-to cut the supporting capacity also along with it enhancement.As a result of the horizontal lifting stem's function, the original component's section stress characteristic by received bends turned the eccentric compression, therefore, after the reinforcement, component's supporting capacity was mainly decided in bends under the condition the original component's supporting capacity 。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
INTRODUCTION
The Yong Jong Grand Bridge is located at the west coast of Korea, and was constructed to connect the new international airport at Yong Jong Island, Inchon, and the mainland. The bridge is 4.4 km long and is composed of three different bridge types—a suspension bridge (550 m), a truss bridge (2,250 m), and steel box bridges. The Grand Bridge (Gil and Cho 1998) has double decks; it will carry six highway lanes on the upper deck, and four highway lanes and dual tracks of a railway on the lower deck. The approach truss bridges are double-deck, Warren truss type bridges. The truss bridges are three-span continuous with a length of 125 m for each span. The width of the truss bridge is 36.1 m.
shoe and dead load of the neighboring truss bridges. The selfanchored suspension bridge typically has limited space for the main cable anchorage, which is located at the stiffening truss, so the air spinning method, which can contain more wires per strand than the parallel wire strand method, is employed to erect the main cables.
2Asst. Mgr., Samsung Corp., 531-7, Kyeongseo-dong, Seo-ku, Inchon, Korea, 404-170.
Note. Discussion open until November 1, 2001. To extend the closing date one month, a written request must be filed with the ASCE Manager of Journals. The manuscript for this paper was submitted for review and possible publication on March 10, 2000; revised August 22, 2000. This paper is part of the Journal of Bridge Engineering, Vol. 6, No. 3, May/ June, 2001. ᭧ASCE, ISSN 1084-0702/01/0003-0183–0188/$8.00 ϩ $.50 per page. Paper No. 22205.
In the construction of the typical earth-anchored suspension bridge, the stiffening truss is constructed after the erection of the main cables and hangers (suspenders). On the contrary, the stiffening truss of the self-anchored suspension bridge is erected on pylons and temporary supports before the spinning of the main cables. In the Grand Bridge, the stiffening truss was divided into eight blocks and erectedrane. As the hangers that link the main cables and the stiffening truss are attached, the main cables of the Grand Bridge will be transformed into a three-dimensional shape. After the attachment of the hangers, the temporary supports for the stiffening truss are removed.
The main feature of the Grand Bridge is the three-span continuous self-anchored suspension bridge. The 550 m long suspension bridge, as shown in Fig. 1, has a main span of 300 m and side spans of 125 m. The main cables of the suspension bridge take a spatial, three-dimensional shape; that is, the main cable planes are inclined. In the plan view, the distance between the main cables is changing along the bridge axis. The distance is shortest at the pylon saddles, and is longest at the center of the main span and the anchorage. When compared to traditional suspension bridges with a vertical cable plane, the suspension bridge with spatial cable system (Gimsing 1994) has a strong torsional stiffness but poses a cable erection problem. The typical earth-anchored suspension bridge has massive concrete anchorages, which carry reactions from the main cables to foundations but take quite a lot of time to build. The self-anchored suspension bridge has the main cable anchorage in the stiffening girder of the bridge so that the forces from the main cable are transferred to the bridge itself. The self-anchored suspension bridge has been rarely constructed due to constructional difficulties (Ochsendorf and Billington 1999). Konohana Bridge in Osaka, Japan, pedestrian bridges in Germany, and the recently proposed Oakland Bay Bridge are a few examples of self-anchored suspension bridges in the world. In the suspension bridge of the Grand Bridge, the horizontal component of the cable force is carried by the stiffening truss, and the vertical component is resisted by a link
1Chf. Res., Inchon Airport Expressway Constr. Ofc., Korea Hwy. Corp., 531-7, Kyeongseo-dong, Seo-ku, Inchon, Korea, 404-170. E-mail: h gil@
The main cables of the suspension bridge have 14 strands, which are arranged in a hexagonal form at the pylon saddle, as shown in Fig. 2. Each strand is composed of 480 galvanized parallel wires. The diameter and tensile strength of the wires are 5.1 mm and 1,570 N/mm2 (160 kgf/mm2), respectively. The pylon saddles as shown in Fig. 2 have five channels to house strands, and each channel is separated by a spacer (thickness of 12 mm). To accommodate inclined cable planes, saddles as shown in Fig. 3 are placed with an angle of 12.59Њ in the transverse direction.