各种铆钉的英文翻译
螺钉英文名称
各种螺钉的英文名称是什么？十字槽盘头组合机丝牙螺钉 Cross recessed pan head Combination screws十字槽盘头机丝牙螺钉 Cross recessed pan head screws十字槽伞头机丝牙螺钉 Cross recessed truss head screw十字槽伞头三角牙螺钉 Cross recessed truss head triangular screw十字槽沉头机丝牙螺钉 Cross recessed countersunk head screw十字槽沉头三角牙螺钉 Cross recessed countersunk head triangular screw十字槽沉头自攻牙螺钉 Cross recessed countersunk head tapping screws十字槽沉头机丝牙螺钉 Cross recessed countersunk head十字槽介子头螺钉 ross recessed truss head screw外六角三角牙螺钉 hexagon head triangular screw十字槽圆头机丝牙螺钉 cross recessed round head screw手拧螺丝(拇指螺丝) thumb screw圆锥销 Taper pins圆柱销 Parallel pins开槽圆柱头螺钉 Slotted cheese head screws开槽盘头螺钉 Slotted pan head screws单耳止动垫圈 Tab washers开口销 Split cooter pins开槽半沉头木螺钉 Slotted raised csk head wood screws 开槽半圆头木螺钉 Slotted round head wood screws开槽沉头木螺钉 Slotted countersunk head wood screws 平垫 Plain washers平垫（带倒角） Mediun washers平垫 Plain washers重型弹垫 Spring lock washers,tang ends标准弹垫 Spring lock washers,square ends鞍形弹垫 Single coil spring lock washers弹簧止动垫圈 Curved spring washers波形弹垫 Wave spring washersT型方颈螺栓 T-head blots with square neckT型双接头螺栓 T-head bolts with double nip螺纹圆锥销 Taper pins with threaded endT型头螺栓 T-head bolts蝶型螺母（美制） Wing nuts America form蝶型螺母（德制） Wing nuts germany form蝶型螺母（美制） Wing screws America form蝶型螺母（德制） Wing screws germany form圆球型盖型螺母 Ball knobs开槽带孔球面圆柱头蚴钉 Slotted capstan screws开槽长圆柱端紧定螺钉 Slotted set srews with full dog point开槽平端紧定螺钉（半牙） Slotted set srews with chamfered end 小六角特薄细牙螺母 Pip nuts with thread外舌止动垫圈 External tap小垫圈(用于圆柱头螺钉) Washers for cheese head screws方斜垫圈（U型） Square taper washers forU-section方斜垫圈（I型） Square taper washers forI-sections方垫圈 Square washers开槽凹端紧定螺钉 Slotted set with cup point六角薄螺母 Hexagon thin nuts细牙六角薄螺母 Hexagon thin nuts木螺钉专用垫圈 Rounds washers for wood constructions密封帽 Sealing caps,push-in type活节螺栓B型 Eye bolts form B内舌止动垫圈 Internal tab washers双耳止动垫圈 Washers with two taps滚花高头螺钉 Knur led thumb screws with collar开槽滚花高头螺钉 Slotted knurled thumb screws with collar 滚花高螺母 Knurled thumb nuts with collar滚花薄螺母 Knurled thumb thin nuts锁紧垫圈 Sealing washers轴用弹性垫圈 Retaining rings for shafts(external),circlips 孔用弹性垫圈 Retaining rings for bores(internal),circlips 方头带垫螺栓 Square head bolts with collar方头圆柱底端螺栓 Square head bolts with half dog point方头带垫关圆底端螺栓 Square head bolts with collar,half dog pointT型槽螺母 T-slot nuts单头螺柱 Single end studs地脚螺栓 Masonry bolts带槽圆螺母 Slotted round nuts端面带孔圆螺母 Round nuts with drilled holes in one face 开槽平端紧定螺钉 Slotted set screws with flat point开槽锥端紧定螺钉 Slotted set screws with cone point六角螺母 Hexagon nuts方螺母-C Square nuts六角头螺钉 Hexagon screws六角头圆柱端紧定螺钉 Hexagon set screws with full dog point薄型方螺母-B Square nuts without bevel(pressed nuts)六角头木螺钉 Hexgon head wood screw(coach screws)吊环螺钉 Lifting eye bolts吊环螺母 Lifting eye nuts圆锥型槽销 Grooved pins,taper grooved圆锥型槽销（半槽） Grooved pins,taper grooved half length平行槽销（带倒角） Grooved pins,parallel grooved full length前端凹槽槽销 Grooved pins,reverve grooved half length中部凹槽槽销 Grooved pins,center grooved圆头槽销 Grooved pins with round head沉头槽销 Grooved pins with countersunk head六角螺母棒 Turnuckles(center parts),made out of hexagon bar花蓝螺栓 Turnuckles with eye bolt and hook bolt弹性圆柱销 Spring pins,heavy type组合式盖型螺母 Hexagon domed cap nuts开槽圆螺母(配合沟头扳手) Slotted round nuts for hook spammer圆螺母（带插销孔） Round nuts with set holes盘型弹簧垫圈 Disc springs喉箍 Hose clamps润滑油嘴（旋扭头） Lubricating nipples,button head管夹 Shackles for conduiltsU型螺栓 Stirrup bolts(U-bolts)球面垫圈 Spherical washers,conical seats圆柱销 Parallel pins厚六角螺母 Hexagon nuts,1.5d厚六角法兰面螺母 Hexagon nuts,1.5d with collar长六角螺母 Hexagon nuts,3d外齿锁紧垫圈 External teeth lock washers内齿锁紧垫圈 Internal teeth lock washers外锯齿锁紧垫圈 External teeth serrated lock washers内锯齿锁紧垫圈 Internal teeth serrated lock washers开口挡圈 Retaining rings for shafts(E-rings),circlips平键（A型） Parallel keys(form A)半圆键 Woodruff keys嵌环（支撑环） Thimbles机器螺钉和垫圈组合件 Screws and washers assemblies自攻螺钉和垫圈组合件 Tapping screws and washer assemblies薄型带孔内六角圆柱螺钉 Hexagon cocket head cap screws with hole,low head 大六角头螺栓 Hexagon head bolts with large head(friction grip nolts)大六角螺母 Hexagon nuts with large wideth across flat(friction grip nuts)大垫圈 Round washers for friction grip bolts楔型方垫圈 Spuare taper washers for friction grip bolts on T-六角法兰面螺母 Hexagon flange nuts全金属六角锁紧螺母（2型） Prevailing torque type hexagon nuts,all metallic nuts轻型弹性圆柱销 Spring pins,light type重型弹性圆柱销用垫圈 Washers for bolts with heavy type spring pinssISO公制螺纹螺钉（多种头型） Thread forming screws for ISO-metric thread 自攻自钻螺钉（多种头型） Self-drilling tapping screws开槽切削螺纹螺钉（多种头型） Thread cutting screws十字槽切削螺纹螺钉（多种头型） Thread cutting screws cross recessT型四爪螺母 Tee nuts with pronge钢结构用六角头螺栓连接副 Hexagon head fitted bolts for steel structures 开槽盘头自攻螺钉 Pan head tapping screws with slot开槽沉头自攻螺钉 countersunk flat head tapping screws with slot开槽半沉头自攻螺钉 Raised sountersunk oval head tapping screws with slot六角头自攻螺钉 Hexagon tapping screws圆柱头螺钉用弹簧垫圈 Spring lock washers for screws with cylindrical heads十字槽盘头自攻螺攻 Pan head tapping screws with cross recessed十字槽沉头自攻螺攻 Countersunk flat head tapping screws with cross recessed十字槽半沉头自攻螺攻 Raised countersunk oval head tapping screws with cross薄型内六角圆柱头螺钉 Hexagon socket head cap screws with,reduced head十字槽盘头螺钉 Pan head screws with cross recessed钢结构用垫圈 Washers for steel structures钢结构用六角头螺栓 Hexagon head bolts for steel structures内六角沉头螺钉 Hexagon socket coutersunk head screws轴用钢丝挡圈 Roundwire snap rings for shafts十字槽半沉头木螺钉 Cross recessed raised countersunk head wood screws十字槽圆头木螺钉 Cross recessed round head wood screws十字槽沉头木螺钉 Cross recessed countersunk head wood screws螺纹护套(普通、自锁等) Ciol inserts,coarse,fine thread,silf locking大外径垫圈 Washers,outside diameter appro.3d弹簧卡子 sping cotter for a bolt平板螺栓 Belting bolts(elevator bolts)干壁钉（墙板钉） Dry wall screws环型螺母 Lifting nuts(eye nuts)圆螺母用止退垫圈 Tab washer for slotted round nuts。
各种铆钉的英文翻译
各种铆钉的英文翻译铆钉种类Open End Blind Rivet 开口型抽芯铆钉Closed End Blind Rivet 封闭型抽芯铆钉Multi-grip Rivet 双鼓型抽芯铆钉Peel Type Blind Rivet 拉花型抽芯铆钉Drive Rivet 击芯铆钉Grooved Type Blind Rivet 沟槽型抽芯铆钉Ring-Grooved Lockbolt 环槽铆钉Maolock 拉丝铆钉Insert Nut 铆螺母Plastic Rivets 塑料铆钉Open Type Blind Rivets 开口型抽芯铆钉Alu/Steel Standard 铝/钢标准型Alu/Steel Countersunk 铝/钢沉头型Alu/Steel Large Flange 铝/钢大帽型Alu/Stainless Steel Standard 铝/不锈钢标准型Alu/Stainless Steel Countersunk 铝/不锈钢沉头型Alu/Stainless Steel Large Flange 铝/不锈钢大帽型Alu/Alu Standard 铝/铝标准型Alu/Alu Countersunk 铝/铝沉头型Alu/Alu Large Flange 铝/铝大帽型Copper/Steel Standard 铜/钢标准型Copper/Steel Countersunk 铜/钢沉头型Copper/Stainless Steel Standard 铜/不锈钢标准型Copper/Stainless Steel Countersunk 铜/不锈钢沉头型Steel/Steel Standard 钢/钢标准型Steel/Steel Countersunk 钢/钢沉头型Steel/Steel Large Flange 钢/钢大帽型Stainless Steel/Steel Standard 不锈钢/钢标准型Stainless Steel/Steel Countersunk 不锈钢/钢沉头型Stainless Steel/Stainless Steel Standard 不锈钢/不锈钢标准型Stainless Steel/Stainless Steel Countersunk 不锈钢/不锈钢沉头型Seald Type Blind Rivets 封闭型抽芯铆钉Alu/Steel Standard 铝/钢标准型Alu/Steel Countersunk 铝/钢沉头型Alu/Stainless Steel Standard 铝/不锈钢标准型Alu/Stainless Steel Countersunk 铝/不锈钢沉头型Alu/Alu Standard 铝/铝标准型Alu/Alu Countersunk 铝/铝沉头型Copper/Steel Standard 铜/钢标准型Copper/Stainless Steel Standard 铜/不锈钢标准型Steel/Steel Standard 钢/钢标准型Stainless Steel/Stainless Steel Standard 不锈钢/不锈钢标准型Multigrip Type Blind Rivets 双鼓型抽芯铆钉Alu/Steel Standard 铝/钢标准型Alu/Steel Large Flange 铝/钢大帽型Alu/Stainless Steel Standard 铝/不锈钢标准型Alu/Stainless Steel Large Flange 铝/不锈钢大帽型Steel/Steel Standard 钢/钢标准型Steel/Steel Large Flange 钢/钢大帽型Stainless Steel/Stainless Steel Standard 不锈钢/不锈钢标准型Stainless Steel/Stainless Steel Large Flange 不锈钢/不锈钢大帽型Anlock Type Blind Rivets 拉丝型抽芯铆钉Alu/Steel Dome Head 铝/钢圆头型Alu/Steel Countersunk 铝/钢沉头型Alu/Alu Dome Head 铝/铝圆头型Alu/Alu Countersunk 铝/铝沉头型Steel/Steel Flat Head 铜/钢圆头型Steel/Steel Countersunk 钢/钢沉头型Stainless Stee/Stainless Stee Dome Head 不锈钢/不锈钢圆头型Fold Type Blind Rivets 抽折式抽芯铆钉Alu/Steel Dome Head 铝/钢圆头型Alu/Alu Dome Head 铝/铝圆头型Steel/Steel Dome Head 钢/钢沉头型Stainless Steel/Steel Dome Head 不锈钢/钢圆头型Stainless Steel/Stainless Steel Dome Head 不锈钢/不锈钢圆头型Peel Type Blind Rivets 拉花型抽芯铆钉Steel/Steel Standard 钢/钢标准型Grooved Type Blind Rivets 沟槽型抽芯铆钉Alu/Steel Standard 铝/钢标准型Drive Rivets 击芯铆钉Alu/Steel Standard 铝/钢标准型Alu/Steel Large Flange 铝/钢大帽型Steel/Steel Standard 钢/钢标准型Steel/Steel Large Flange 钢/钢大帽型Ring-Grooved Lockbolt 环槽型抽芯铆钉Alu Standard 铝标准型Alu Countersunk 铝沉头型Steel Standard 钢标准型Steel Countersunk 钢沉头型Stainless Steel Standard 不锈钢标准型Stainless Steel Countersunk 不锈钢沉头型Blind Rivet Nuts 抽芯铆螺母Alu Standard 铝标准型Alu Countersunk 铝沉头型Alu Small Head 铝小头型Steel Standard 钢标准型Steel Countersunk 钢沉头型Steel Small Head 钢小头型Stainless Steel Dome Head 不锈钢圆头型Stainless Steel Countersunk 不锈钢沉头型Stainless Steel Small Head 不锈钢小头型raised-head rivet 凸头铆钉blind rivet 盲铆钉空心铆钉Pulling Rivet拉铆钉Countersunk rivet 埋头铆钉沉头铆钉Riveting Tool Rivets 铆接工具。
紧固件-中英文对照
紧固件-中英文对照No. 英文单词简写中文1 screw scr 螺丝2 nut nut 螺母3 washer wash 垫圈4 head hd 头5 thread thre 螺纹6 coating coat 镀层7 rivet riv 铆钉8 standoff stdoff 内外六角钉9 driver driv 穴10 hexagon hexa 六角11 tooth tooth 齿12 lock lck 锁13 spring spr 弹簧14 wave wave 波浪型15 pitch pitch 牙距16 partial thread PT 半螺纹17 PT PT 一种螺纹形式18 Full Thread FT 全螺纹19 silver silv 银20 cone cone 锥形21 Eco-syn Eco 30度牙的一种螺纹22 Thread Forming TF 自攻螺纹23 Self Tapping self tapp 自切屑螺纹24 pin pin 销25 shaft Shaf 轴26 steel St 铁27 stainless steel SS 不锈钢28 Brass(Cu) Bras(Cu) 铜29 Aluminum AL 铝30 Rubber Rub 橡胶31 machine screw mech scr 机制螺丝32 SEM screw SEM Scr 组合螺丝33 Material material 材料34 Grade GD 等级35 Finish Finish 表面处理36 Point Point 点37 Clamp Clam 夹子38 internal Int 内39 external ext 外40 thickness / 厚度41 length / 长度42 hole / 孔43 Metric Metcric 公制44 DIN / 德标45 ANSI / 美标46 JIS / 日标螺丝相关参数英语对照A: Machine Screw: 机械螺丝B: Tapping Screw: 自攻螺丝(分使用于金属与使用于塑料二种)B-1: Sheet Metal Tapping Screw. (铁板牙自攻螺丝)B-2: Plastic Tapping Screw. ( 塑料用, 自攻螺丝)C: Wooden Screw : 木工螺丝D: Drywall Screw : 水泥墙螺丝常见螺丝材质:a.Low Carbon Steel :低碳钢b. SS-304 : Stainless Steel 304c. SS-302: Stainless Steel 302 :结构韧性较好d. Aluminum 5052 :铝合金5052d. Brass: 黄铜e. Bronze: 青铜f. UNS C11000 Copper: 锑铜Finish Code: 外观处理规格Head Code: 头部外型螺丝型号Drive Code: 头部剖沟,特征型号Length Code: 螺丝长度(mm)A-1: Thread Code: 螺丝型号A-2: Length Code: 螺丝长度:A-3: Drive Code/ 头部剖沟,特征.a. Slotted: 一字( Minus )b. Phillips: 十字( Plus )c. Phil-Slot: 一字/十字d. Hex Scoket: 内六角e. One Way: 单向(只可锁入,不可退出) A-4: Head Code/ 头部外型.a. Flat: 平头(锁入后,顶部与工作件齐平)b. Oval: 色拉头c. Round: 圆头d. Pan: 圆扁头e. Truss: 大圆扁头f. Hex : 六角头A-5: Finish Code/ 外观处理.a. Z: Zine-Plated: 镀锌b. Ni: Ni-Plated: 镀镍c. Tin-Plated: 镀锡d. Zine Plated / Green Iridite: 镀锌绿膜处理.e. Radiant Plated: 镀五彩f. Passivate: 抗氧化处理.g. Alodial Finish: 无外观处理螺纹大径：Major Diam螺纹中径：Pitch diam螺纹底径：Minor diam通止规：Go/No go gage机械性能：mechanical and physical propertiesunified thread 统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆Case carburization 表面渗碳With across flats 对边With across corners 对角Radius of fillet:头下圆角Transition thread length 过度螺纹Wrenching height 扳拧高度Rockwell 铬氏硬度Vickers 维氏硬度Brinell 布氏硬度Metallography microscope 金相显微镜Salt spray device 盐雾试验箱Tensile testing machine 拉力试验机Cold forming 冷打Hot forging 红镦P C 8 = property class 8 机械性能8级原材料：Raw material球化退火：Annealing冷拔：Drawing冷镦：Forming机加工：Machining螺纹成型：Roll Threading热处理：heat-treatment表面处理：finish去氢：Lustrating hydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hot forging冲压：punchingDiameter 直径Length 长度各类紧固件标准件产品英语翻译对照插片壁虎Steel Ceiling Anchors内迫壁虎Drop in Anchors碳钢锤钉壁虎Steel Hit Anchors碳钢六角螺帽Steel Hex Coupling Nuts强力车修壁虎Wedge Anchors外迫壁虎Cut Anchors化学壁虎Chemical Anchors不锈钢重载胀栓Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽Tie Wire Anchors锌合金打入式壁虎Hammer Drive Anchors弹簧螺帽Strut Nuts兰花夹系列Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎Hollow Wall Anchors套管式壁虎Sleeve Anchors打入式壁虎鱼形尼龙壁虎Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors)强力式锤钉壁虎Hit Anchors电梯壁虎Bolt Anchors重载壁虎Heavy duty anchors两片夹Loxin Masonry Anchors定位螺栓Set Bolts长型兰花夹Short Strap Anchors工具棒Drop in Setting Tools象脚壁虎Elephant foot anchors水泥预埋件Concrete Insert翻边胀轴Drop in Anchor with Lip冲件Legs Drywall Anchors六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts 不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut 六角螺丝(栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝Hex Head Machine Bolts六角木牙螺丝Hex Lag Bolts四角螺丝Square Head BoltsT头螺丝T Head Bolts马车螺丝Carriage Bolts环首螺丝Eye Bolts内六角孔螺丝Hex Socket Cap Screws固定螺丝Set Screws螺椿栓Stud Bolts螺旋椿Screw Studs轮壳螺栓Wheel Bolts翼形螺丝Wing Screws自攻螺丝Self Tapping Screws自削螺丝Thread Cutting Screws钻尾螺丝Self Drilling Screws机械螺丝Machine Screws木螺丝Wood Screws家具螺丝Furniture Screws塑板螺丝Chipboard Screws墙用螺丝Drywall Screws基础螺栓Foundation BoltsU型螺栓U Bolts勾头螺栓Hook Bolts套挂螺丝Toggle Bolts突缘螺丝Flange Bolts轨道螺栓(鱼尾螺丝) Track Bolts耐候钢螺丝Corten Steel Heavy Hex Bolts扭矩控制螺栓T.C.Bolts高张力螺栓High Strength Bolts剪力钉(焊接螺丝) Welding Studs螺丝附华司组合Screws And Washers Assembled(Sems)大尺寸螺栓Big Size Bolts不锈钢小螺丝Stainless Steel Sheet Metal Screws不锈钢大螺丝Stainless Steel Bolts铝螺丝Aluminum Screws合金钢螺丝Alloy Steel Screws电子螺丝Electronic Screws微小精密螺丝Micro Screws塑料螺丝Plastic Screws复合材料用螺丝Particle Board Screws钛合金螺丝Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料Ti,Zr,Mo,Nb Pare Metal Bolts Parts拇指螺丝Thumb Screws双头牙螺丝Double End Screws Hanger Bolt 车辆(汽车)螺丝、螺帽Automotive Fasteners 航天用螺丝Aerospace Fasteners飞机特殊扣件Source Control Bolts拉栓Blind Bolts面板螺丝Panel Fasteners电梯螺丝Elevator Bolts四角头固定螺丝Square Set Screws大头马车螺丝Step Bolts单向螺丝One Way Lag Screws管夹螺丝Hose Clamp Screws不锈钢固定螺丝Stainless Steel Hex Socket Cap Screws不锈钢内六角螺丝Stainless Steel Hex Socket Cap Screws铰链螺丝Hinge Screws货柜螺丝Container Screws复合材料钻尾螺丝Bi-Metal Self Drilling Screws三角牙螺丝Trilobular Thread Screws高低牙螺丝High Low Screws夹板用螺丝Particle Board Screws马桶螺丝Toilet Closet Bolts特长螺丝Special Longer Screws建业螺丝Building Fasteners不锈钢六角螺丝Stainless Steel Hex Socket Cap Screws其它特殊螺丝Special Screws Or Bolts不锈钢特殊螺丝Special Stainless Steel Screws宽牙螺丝（粗牙螺丝）Coarse Thread Screws 链带螺丝Collated Screws水泥螺丝Concrete Screws板模螺丝Construction Bolts锌蝶螺丝Die Cast Wing Screws; Zinc Alloy 重型车螺丝Heavy Duty Wheel Hub Bolts内六角固定螺丝Hex Socket Set Screws复合材料用螺丝（夹板用）Particle Board Screws犁壁螺丝Plow Bolts不锈钢木螺丝Stainless Steel Wood Screws 套挂螺栓及螺丝Toggle Bolts钛合金膨胀螺丝Titanium Alloy Expansion Bolts六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed CapNuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts 不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts锌压属螺帽Zinc Die Casting Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut合金钢线材盘元Alloy Steel Wire Rod球状化线材Annealing Wire And Rod黑铁丝Black Wire黄铜棒线Brass Wire And Rod磨光棒钢Bright Steel Bar(Hex/Round/Square)铜合金线Copper Alloy Wire线切割线 E.D.M Cutting Wire快削钢线材盘元Free Cutting Steel Wire Rod 线材Iron Or Steel Wire线材盘元Iron Or Steel Wire Rod洋白铜线Nickel Silver Wire磷青铜线Phosphate Bronze Wire不锈钢条棒Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材Stainless Steel Cold Heading Wire不锈钢线(抽线后) Stainless Steel Draw Wire 不锈钢线材Stainless Steel Wire不锈钢线材及盘元Stainless Steel Wire And Rod棒钢Steel Bar(Hex/Round/Square)转回90度碾线头机90讧evolving Wire Twisting Machine气动拉钉机Air Riveter各式螺丝类产品自动包装Automatic Packaging For All Kinds Of Packaging自动包装机Automatic Packing Machine螺丝制造搓牙机械Automatic Thread Rolling Machine螺丝割尾加工机械Automatic Thread Slotting Machine螺丝制造成型机械Automatic Trimming Machine拉钉打头机Blind Rivet Heading Machine螺丝、螺帽成型机Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉Bolt Nut And Screws Heat Treatment Furnaces球状化电器炖炉Carburizing Furnace Vacuum And Bell Type Furnace超防锈复合瓷膜Ceramic Coating连续式光辉渗碳淬火炉Continuous Bright Carburizing Quenching Furnace连续式光辉调质淬火炉Continuous Bright Hardening Quenching Furnace中、高热镀锌光辉连续炉Continuous Bright Heat Treat Furnace连续式光辉热处理炉Continuous Type Bright Heat Treatment Furnace螺丝割尾及特殊割遘加工Machine Screw Shank Slotting螺丝钻孔加工Screw Shank Drilling鸡眼上下模Eyelets Dies一般线材、盘元、退火炉General Wire,Wire Rod,Annealing Furnace倒立式滑落型伸线机Handstand Type Wire Drawing Machine十字冲模Header Punches In Various Drives 成型冲模Header Punches In Various Drives 螺丝打头机Heading Machine螺丝制造高速搓牙机械High Speed Automatic Thread Rolling Machine高中低周波感应加热炉High,Medium,Low Frequency Induction Heater空心打头机Hollow Heading Machine热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts机械镀锌Mechanical Galvanized迷你成型机Mini-Formers成品自动收线机Non-Stop Coiler精抽自动收线机Non-Stop Coiler(Skinpass) 螺帽模Nut Forming Dies螺帽成型模Nuts Formers特殊零件成型机Parts Forming Maching冲模Punch Dies冲子Punch Pins罗拉成型机Rollers Formers机(踏)车用螺丝成型机Screw For Motorcycle Or Bicycle Heading Machine止付螺丝成型机Set Screws Formers套高成型机Sockets Formers一般线材、盘元、螺丝合金炖炉SpheroidizingBright Annealing Furnace球状化热处理炉Spheroidizing Heat Treatment Furnace攻牙机Tapping Machine螺丝攻、车刀、模具Taps Dies And Tools搓牙机铁屑分离装置Thread Chip Separator 滚牙轮Thread Rolling Dies牙板Thread Rolling Dies Plates精密油压滚牙机Hydraulic Thread Rolling Machines模具Tools六角整头模Trimming Dies Hexagan碳化钨模具Tungsten Carbide Die镀钛处理(Tin)专业加工服务Tin Hard Coating For Cutting Tools And Punch By Pvd电镀化学原料Various Electroplating Chemicals环规校正Calibration For Ring Gage环规、牙规、三线规校正Calibration For Ring Gage, Athread Gage, 3 Wire Gage螺丝、螺帽品检量测仪器Fasteners Inspection And Measurement Instruments螺丝、螺帽成型攻牙专用油Forming And Tapping Oils For Bolts And Nuts Formers螺丝、螺帽五金等检验Insptection Services For Fasteners And Hardware德国schatz扭力机代理Representative Of Schatz Torque MachinIso品质保证系统Iso Quality Assurance System生产管理系统Production Control System物料管理系统Material Control System齿轮Gears不锈钢牙条棒Stainless Steel Hread Rod马达轴承轴心组件Bearing Shaft(Motor)轴承轴心Bearing Shaft开口铆钉Blind Rivets长形拉帽Blind Rivet Nuts拉帽Blind Nuts拉钉Blind Rivets实心梢Clevis Pins And Straight Pins弹片Clips卷钉Coil Nails冷锻零件Cold Forming Part开口销Cotter PinsE型环E-Rings膨胀螺栓Expansion Anchor Bolts鸡眼钉Eyelets RivetsR型销Snap Pins闸、锁Latches And Keeper Assembleds其它特殊铆钉Other Specil Rivets销Pins格式管夹、管束Pipe Hanger铆钉Rivets螺旋锔及螺旋圈Screw Hook And Screw Rings中空钉Semi-Tubular Rivet开叉钉Split Drive Anchors弹簧华司Spring Washers弹簧蝴蝶夹Spring Wings不锈钢华司Stainlesssteel Washers钢铁钉Steel And Iron Nails搓牙铁钉Thread Nails钛合金铆钉Titaium Alloy Rivets管形铆钉Tubular Rivets华司Washers真空热处理Vacuum Heat Treatment螺丝、螺帽、五金、Diy扣件Fasteners合金钢工具Alloy Steel Tools螺栓模Bolt Heading Dies手动拉钉钳Hand Riveter船舶链Anchor Chain脚踏车链锁Bicycle Chain Locks螺丝起子Bit罗拉Chain Roller特殊铆合扣件Collars(A Blindfastener For Huck Intl)装饰链Decorative Chains自攻螺纹衬套Ensat Threaded Inserts六角扳手Hexagon Keys超音螺纹压入式螺纹自动锁扣Threaded Inserts For Plastic Injection Mouldeings汽车特殊杆接件Special Auto-Mobile Fastener As Your Needs螺纹护套Recoil Inserts链条用滚子Roller For Roller Chain金属板镶嵌组件及自动夹扣组件Sheet MetalFasteners工具套筒组件Socket Wrench Sets不锈钢链Stainless Steel Chains轭子T-Yoke轮胎链Tire Chains狗链Dog Chains喇叭头轭铁U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道Stainless Wheel's Rack For Transporter工业用链Industrial Steel Link Chains拖链安全链Tow Chains And Safety Chains 机车离合器零件Manufacture Of Motorcycle's Cvt Parts牙条棒Thread Rod机(踏)车用螺丝、轴心Screws And Shafts For Motorcycle Or Bicycle针车用螺丝、轴心Screws And Shafts For Sewing Maching止付螺丝Socket Set Screws不锈钢宽牙螺丝Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝Stainless Steel High-LowThread Screws不锈钢机械螺丝Stainless Steel Machine Screws不锈钢钻尾螺丝Stainless Steel Self Drilling Screws不锈钢自攻螺丝Stainless Steel Self Tapping Screws不锈钢自削螺丝Stainless Steel Thread Cutting Screws不锈钢三角牙螺丝Stainless Steel Tri-Lobular Thread Screws。
常用紧固件英语
常用紧固件英语螺纹大径：Major Diam螺纹中径：Pitch diam螺纹底径：Minor diam通止规：Go/No go gage机械性能：mechanical and physical propertiesunified thread 统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆Case carburization 表面渗碳With across flats 对边With across corners 对角Radius of fillet:头下圆角Transition thread length 过度螺纹Wrenching height 扳拧高度Rockwell 铬氏硬度Vickers 维氏硬度Brinell 布氏硬度Metallography microscope 金相显微镜Salt spray device 盐雾试验箱Tensile testing machine 拉力试验机Cold forming 冷打Hot forging 红镦P C 8 = property class 8 机械性能8级原材料：Raw material球化退火：Annealing冷拔：Drawing冷镦：Forming机加工：Machining螺纹成型：Roll Threading热处理：heat-treatment表面处理：finish去氢：Lustrating hydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hot forging冲压：punchingDiameter 直径Length 长度1 标准GB （国标）ISO(国际标准)DIN（德制）JIS（日标）ANSI /ASME （美标）BA （英制）2 螺纹M. MF (公制牙)UNC.UNF (美制牙)BSW.BSF (英制牙)3 海关编码73181500 螺栓73181600 螺帽73182100 垫圈BO=black oxide 氧化发黑IHH=ind hex head 锯六角头PH=phillips 十字槽sw/fw=split washer/flatwasher 弹垫平垫kep nut 锁紧螺母cementation 渗碳acorn nut 盖形螺母螺丝头型Pan 圆头(盘头)Oval 半沉头H.W.H.. 六角小法兰H.W.F. 六角大法兰CSK 沙拉头(沉头)Large wafer 大扁平头Bugle 喇叭头Truss 盘头带垫Pozi 米制槽Phill 十字槽Serra-tion 垫下带花Flower Head 开花头6-bobes recess 内梅花Piston bolt 活塞螺钉Winding bolt 线圈螺钉Hexagon head bolts-full thread 六角头螺栓全螺纹Carriage bolt 马车螺栓Square head bolt-product grade C 方头螺栓C级Flat counter sunk square neck bolts 沉头方颈螺栓Flat counter sunk nib bolts 沉头带榫螺栓Cup head square neck bolts 半圆头方螺栓Cup head nib bolts 半圆头带榫螺栓Cup head square neck bolts with large head –product grade C大半圆头方颈螺栓C级Hexagon head bolts-product grade C六角头螺栓C级Hexagon head bolts-full thread –product grade C 六角头螺栓全螺纹C级Hexagon head bolts 六角头螺栓Hexagon head bolts –full thread 六角头螺栓全螺纹Hexagon head bolts-reduced shank-product grade B六角头螺栓细杆菌B级Hexagon head bolts with fine pitch thread 六角头螺栓细牙Hexagon head bolts with fine pitch thread full thread六角头螺栓细牙全螺纹Hexagon flange bolts –heavy series-product grade B 六角法兰面螺栓加大系列车员B级Cross recessed pan head tapping screws 十字槽盘头自攻螺钉Hexagon flange drilling screw with tapping screw thread 六角法兰面自钻自攻螺钉中文名称英文名称六角螺丝(栓) HEX HEAD CAP SCREWS(HEX BOLTS)六角机械螺丝HEX HEAD MACHINE BOLTS六角木牙螺丝HEX LAG BOLTS四角螺丝SQUARE HEAD BOLTST头螺丝T HEAD BOLTS马车螺丝CARRIAGE BOLTS环首螺丝EYE BOLTS内六角孔螺丝HEX SOCKET CAP SCREWS固定螺丝SET SCREWS螺椿栓STUD BOLTS螺旋椿SCREW STUDS轮壳螺栓WHEEL BOLTS翼形螺丝WING SCREWS自攻螺丝SELF TAPPING SCREWS自削螺丝THREAD CUTTING SCREWS钻尾螺丝SELF DRILLING SCREWS旋入螺丝DRIVE SCREWS机械螺丝MACHINE SCREWS木螺丝WOOD SCREWS家具螺丝FURNITURE SCREWS塑板螺丝CHIPBOARD SCREWS墙用螺丝DRYW ALL SCREWS基础螺栓FOUNDATION BOLTSU型螺栓U BOLTS勾头螺栓HOOK BOLTS套挂螺丝TOGGLE BOLTS突缘螺丝FLANGE BOLTS轨道螺栓(鱼尾螺丝) TRACK BOLTS耐候钢螺丝CORTEN STEEL HEA VY HEX BOLTS扭矩控制螺栓T.C.BOLTS高张力螺栓HIGH STRENGTH BOLTS剪力钉(焊接螺丝) WEL DIN G STUDS螺丝附华司组合SCREWS AND W ASHERS ASSEMBLED(SEMS)大尺寸螺栓BIG SIZE BOLTS不锈钢小螺丝STAINLESS STEEL SHEET METAL SCREWS不锈钢大螺丝STAINLESS STEEL BOLTS铜螺丝BRASS SCREWS铝螺丝ALUMINUM SCREWS合金钢螺丝ALLOY STEEL SCREWS电子螺丝ELECTRONIC SCREWS微小精密螺丝MICRO SCREWS塑料螺丝PLASTIC SCREWS复合材料用螺丝PARTICLE BOARD SCREWS钛合金螺丝TITANIUM ALLOY BOLTS钛、锆、钼、铌等螺丝、零件、材料TI,ZR,MO,NB PARE METAL BOLTS PARTS 拇指螺丝THUMB SCREWS双头牙螺丝DOUBLE END SCREWS HANGER BOLT车辆(汽车)螺丝、螺帽AUTOMOTIVE FASTENERS航天用螺丝AEROSPACE FASTENERS飞机特殊扣件SOURCE CONTROL BOLTS拉栓BLIND BOLTS面板螺丝PANEL FASTENERS电梯螺丝ELEVATOR BOLTS四角头固定螺丝SQUARE SET SCREWS大头马车螺丝STEP BOLTS单向螺丝ONE W AY LAG SCREWS管夹螺丝HOSE CLAMP SCREWS不锈钢固定螺丝STAINLESS STEEL HEX SOCKET CAP SCREWS不锈钢内六角螺丝STAINLESS STEEL HEX SOCKET CAP SCREWS铰链螺丝HINGE SCREWS货柜螺丝CONTAINER SCREWS复合材料钻尾螺丝BI-METAL SELF DRILLING SCREWS三角牙螺丝TRILOBULAR THREAD SCREWS高低牙螺丝HIGH LOW SCREWS夹板用螺丝PARTICLE BOARD SCREWS马桶螺丝TOILET CLOSET BOLTS特长螺丝SPECIAL LONGER SCREWS建业螺丝BUIL DIN G FASTENERS不锈钢六角螺丝STAINLESS STEEL HEX SOCKET CAP SCREWS其它特殊螺丝SPECIAL SCREWS OR BOLTS不锈钢特殊螺丝SPECIAL STAINLESS STEEL SCREWS宽牙螺丝（粗牙螺丝）COARSE THREAD SCREWS链带螺丝COLLATED SCREWS水泥螺丝CONCRETE SCREWS板模螺丝CONSTRUCTION BOLTS锌蝶螺丝DIE CAST WING SCREWS; ZINC ALLOY重型车螺丝HEA VY DUTY WHEEL HUB BOLTS内六角固定螺丝HEX SOCKET SET SCREWS复合材料用螺丝（夹板用）PARTICLE BOARD SCREWS犁壁螺丝PLOW BOLTS机(踏)车用螺丝、轴心SCREWS AND SHAFTS FOR MOTORCYCLE OR BICYCLE 针车用螺丝、轴心SCREWS AND SHAFTS FOR SEWING MACHING止付螺丝SOCKET SET SCREWS不锈钢宽牙螺丝STAINLESS STEEL COARSE THREAD SCREWS不锈钢高低牙螺丝STAINLESS STEEL HIGH-LOW THREAD SCREWS不锈钢机械螺丝STAINLESS STEEL MACHINE SCREWS不锈钢钻尾螺丝STAINLESS STEEL SELF DRILLING SCREWS不锈钢自攻螺丝STAINLESS STEEL SELF TAPPING SCREWS不锈钢自削螺丝STAINLESS STEEL THREAD CUTTING SCREWS不锈钢三角牙螺丝STAINLESS STEEL TRI-LOBULAR THREAD SCREWS不锈钢木螺丝STAINLESS STEEL WOOD SCREWS套挂螺栓及螺丝TOGGLE BOLTS钛合金膨胀螺丝TITANIUM ALLOY EXP ANSI ON BOLTS中文名称英文名称六角盖头螺帽HEX CAP NUTS六角锯齿螺帽HEX SERRATED NUTS六角轮缘螺帽HEX FLANGE NUTS高脚螺帽HEX COUPLING NUTS(HIGH NUTS)圆螺帽ROUND NUTS四角螺帽SQUARE NUTS管用螺帽PIPE NUTS轮壳螺帽WHEEL NUTS蝶型螺帽WING NUTSU形螺帽U NUTST形螺帽T NUTS环首螺帽EYE NUTS齿形螺帽KEP NUTS齿花螺帽CLINCH NUTS耐候钢六角重型螺帽CORTEN STEEL HEA VY HEX NUTS焊接螺帽WELD NUTS高张力螺帽HEIGH STRENGTH NUTS建业用螺帽STRUCTURAL NUTS不锈钢螺帽STAINLESS STEEL NUTS铜螺帽BRASS NUTS铝螺帽ALUMINUM NUTS合金钢螺帽ALLOY STEEL NUTS重型车螺帽HEA VY DUTY WHEEL HUB NUTS铁器焊接袋帽ACORN CAP NUTS金属预置扭矩式螺帽ALL-METAL PREV AILING TORQUE TYPE NUTS壁虎螺帽ANCHOR NUTS大尺寸螺帽BIG SIZE NUTS铁盖袋帽CLOSED END ACORN NUTS盘形华司螺帽CONICAL WASHER NUTS铁盖+尼龙圈组合盖帽DIN 986 DOMED CAP NUTS突缘尼龙盖帽FLANGE NYLON INSERT LOCK NUTS平面华司螺帽FLAT WASER NUTS六角割沟螺帽HEX SLOTTED NUT自锁螺帽SELF-LOCKING NUTS制止螺帽SLI DIN G NUTSSLN-自动防松螺帽SLN SELF-LOCKING NUTS其它特殊螺帽SPECIAL NUTS弹簧螺帽SPRING NUTS不锈钢突缘螺帽STAINLESS STEEL FLANGE NUTS不锈钢六角轮缘尼龙螺帽STAINLESS STEEL FLANGE NYLON INSERT LOCK NUTS 不锈钢六角重型螺帽STAINLESS STEEL HEA VY HEX NUTS不锈钢六角螺帽STAINLESS STEEL HEX NUTS不锈钢尼龙嵌入螺帽STAINLESS STEEL NYLON INSERT LOCK NUTS锌压属螺帽ZINC DIE CASTING NUTS普通六角螺帽HEX NUTS六角重型螺帽HEA VY HEX NUTS薄型螺帽HEX JAM NUTS尼龙嵌入防松螺帽NYLON INSERT LOCK NUTS机械螺丝用六角螺帽HEX MACHINE SCREW NUT中文名称英文名称合金钢线材盘元ALLOY STEEL WIRE ROD球状化线材ANNEALING WIRE AND ROD黑铁丝BLACK WIRE黄铜棒线BRASS WIRE AND ROD磨光棒钢BRIGHT STEEL BAR(HEX/ROUND/SQUARE)铜合金线COPPER ALLOY WIRE线切割线E.D.M CUTTING WIRE快削钢线材盘元FREE CUTTING STEEL WIRE ROD线材IRON OR STEEL WIRE线材盘元IRON OR STEEL WIRE ROD洋白铜线NICKEL SILVER WIRE磷青铜线PHOSPHA TE BRONZE WIRE不锈钢条棒STAINLESS STEEL BAR(ROUND/HEX/SQUARE)不锈钢冷锻线材STAINLESS STEEL COLD HEA DIN G WIRE不锈钢线(抽线后) STAINLESS STEEL DRAW WIRE不锈钢线材STAINLESS STEEL WIRE不锈钢线材及盘元STAINLESS STEEL WIRE AND ROD棒钢STEEL BAR(HEX/ROUND/SQUARE)转回90度碾线头机90讧EVOLVING WIRE TWISTING MACHINE气动拉钉机AIR RIVETER各式螺丝类产品自动包装AUTOMA TIC PACKAGING FOR ALL KINDS OF PACKAGING 自动包装机AUTOMA TIC PACKING MACHINE螺丝制造搓牙机械AUTOMATIC THREAD ROLLING MACHINE螺丝割尾加工机械AUTOMATIC THREAD SLOTTING MACHINE螺丝制造成型机械AUTOMATIC TRIMMING MACHINE拉钉打头机BLIND RIVET HEA DIN G MACHINE螺丝、螺帽成型机BOLT FORMERS,NUTS FORMERS,HEADERS螺丝、螺帽热处理BOLT NUT AND SCREWS HEAT TREATMENT螺丝、螺帽热处理炉BOLT NUT AND SCREWS HEAT TREATMENT FURNACES球状化电器炖炉CARBURIZING FURNACE V ACUUM AND BELL TYPE FURNACE超防锈复合瓷膜CERAMIC COATING连续式光辉渗碳淬火炉CONTINUOUS BRIGHT CARBURIZING QUENCHING FURNACE 连续式光辉调质淬火炉CONTINUOUS BRIGHT HARDENING QUENCHING FURNACE 中、高热镀锌光辉连续炉CONTINUOUS BRIGHT HEAT TREAT FURNACE连续式光辉热处理炉CONTINUOUS TYPE BRIGHT HEAT TREATMENT FURNACE螺丝割尾及特殊割遘加工MACHINE SCREW SHANK SLOTTING螺丝钻孔加工SCREW SHANK DRILLING鸡眼上下模EYELETS DIES一般线材、盘元、退火炉GENERAL WIRE,WIRE ROD,ANNEALING FURNACE倒立式滑落型伸线机HANDSTAND TYPE WIRE DRAWING MACHINE十字冲模HEADER P UNC HES IN V ARIOUS DRIVES成型冲模HEADER P UNC HES IN V ARIOUS DRIVES螺丝打头机HEA DIN G MACHINE螺丝制造高速搓牙机械HIGH SPEED AUTOMA TIC THREAD ROLLING MACHINE高中低周波感应加热炉HIGH,MEDIUM,LOW FREQUENCY INDUCTION HEATER空心打头机HOLLOW HEA DIN G MACHINE热浸镀锌螺丝、螺帽HOT DIP GALV ANIZING BOLTS AND NUTS机械镀锌MECHANICAL GALV ANIZED迷你成型机MINI-FORMERS成品自动收线机NON-STOP COILER精抽自动收线机NON-STOP COILER(SKINPASS)螺帽模NUT FORMING DIES螺帽成型模NUTS FORMERS特殊零件成型机PARTS FORMING MACHING冲模P UNC H DIES冲子P UNC H PINS罗拉成型机ROLLERS FORMERS机(踏)车用螺丝成型机SCREW FOR MOTORCYCLE OR BICYCLE HEA DIN G MACHINE 止付螺丝成型机SET SCREWS FORMERS套高成型机SOCKETS FORMERS一般线材、盘元、螺丝合金炖炉SPHEROIDIZING BRIGHT ANNEALING FURNACE球状化热处理炉SPHEROIDIZING HEAT TREATMENT FURNACE攻牙机TAPPING MACHINE螺丝攻、车刀、模具TAPS DIES AND TOOLS搓牙机铁屑分离装置THREAD CHIP SEPARA TOR滚牙轮THREAD ROLLING DIES牙板THREAD ROLLING DIES PLATES精密油压滚牙机HYDRAULIC THREAD ROLLING MACHINES模具TOOLS六角整头模TRIMMING DIES HEXAGAN碳化钨模具TUNGSTEN CARBIDE DIE镀钛处理(TiN)专业加工服务TiN HARD COA TING FOR CUTTING TOOLS AND P UNC H BY PVD电镀化学原料V ARIOUS ELECTROPLATING CHEMICALS环规校正CALIBRATION FOR RING GAGE环规、牙规、三线规校正CALIBRATION FOR RING GAGE, A THREAD GAGE, 3 WIRE GAGE螺丝、螺帽品检量测仪器FASTENERS INSPECTION AND MEASUREMENT INSTRUMENTS螺丝、螺帽成型攻牙专用油FORMING AND TAPPING OILS FOR BOLTS AND NUTS FORMERS螺丝、螺帽五金等检验INSPTECTION SERVICES FOR FASTENERS AND HARDWARE德国SCHATZ扭力机代理REPRESENTATIVE OF SCHATZ TORQUE MACHINISO品质保证系统ISO QUALITY ASSURANCE SYSTEM生产管理系统PRODUCTION CONTROL SYSTEM物料管理系统MATERIAL CONTROL SYSTEM中文名称英文名称齿轮GEARS不锈钢牙条棒STAINLESS STEEL HREAD ROD马达轴承轴心组件BEARING SHAFT(MOTOR)轴承轴心BEARING SHAFT开口铆钉BLIND RIVETS长形拉帽BLIND RIVET NUTS拉帽BLIND NUTS拉钉BLIND RIVETS实心梢CLEVIS PINS AND STRAIGHT PINS弹片CLIPS卷钉COIL NAILS冷锻零件COLD FORMING PART开口销COTTER PINSE型环E-RINGS膨胀螺栓EXP ANSI ON ANCHOR BOLTS鸡眼钉EYELETS RIVETSR型销SNAP PINS闸、锁LATCHES AND KEEPER ASSEMBLEDS其它特殊铆钉OTHER SPECIL RIVETS销PINS格式管夹、管束PIPE HANGER铆钉RIVETS螺旋锔及螺旋圈SCREW HOOK AND SCREW RINGS中空钉SEMI-TUBULAR RIVET开叉钉SPLIT DRIVE ANCHORS弹簧华司SPRING W ASHERS弹簧蝴蝶夹SPRING WINGS不锈钢华司STAINLESSSTEEL WASHERS钢铁钉STEEL AND IRON NAILS搓牙铁钉THREAD NAILS钛合金铆钉TITAIUM ALLOY RIVETS管形铆钉TUBULAR RIVETS华司W ASHERS真空热处理V ACUUM HEAT TREATMENT螺丝、螺帽、五金、DIY扣件FASTENERS合金钢工具ALLOY STEEL TOOLS螺栓模BOLT HEA DIN G DIES手动拉钉钳HAND RIVETER船舶链ANCHOR CHAIN脚踏车链锁BICYCLE CHAIN LOCKS螺丝起子BIT罗拉CHAIN ROLLER特殊铆合扣件COLLARS(A BLINDFASTENER FOR HUCK INTL)装饰链DECORATIVE CHAINS自攻螺纹衬套ENSAT THREADED INSERTS六角扳手HEXAGON KEYS超音螺纹压入式螺纹自动锁扣THREADED INSERTS FOR PLASTIC INJECTION MOULDEINGS汽车特殊杆接件SPECIAL AUTO-MOBILE FASTENER AS YOUR NEEDS螺纹护套RECOIL INSERTS链条用滚子ROLLER FOR ROLLER CHAIN金属板镶嵌组件及自动夹扣组件SHEET METAL FASTENERS工具套筒组件SOCKET WRENCH SETS不锈钢链STAINLESS STEEL CHAINS轭子T-YOKE轮胎链TIRE CHAINS狗链DOG CHAINS喇叭头轭铁U-YOKE,T-YOKE FOR SPEAKER不锈钢输送带轮用轨道STAINLESS WHEEL'S RACK FOR TRANSPORTER工业用链INDUSTRIAL STEEL LINK CHAINS拖链安全链TOW CHAINS AND SAFETY CHAINS机车离合器零件MANUFACTURE OF MOTORCYCLE'S CVT PARTS牙条棒THREAD ROD貨運用語的中英文對照货物goods | freight | cargo运输transportation | transit | conveyance运送to transport | to carry | to convey运输业transportation business | forwarding business | carrying trade运输代理人a forwarding agent承运人a freight agent | a carrier船务代理人a shipping agent陆上运输transportation by land海上运输transportation by sea货物运输goods traffic | freight traffic | carriage of freights | carriage of goods 货轮cargo boat | freighter | cargo steamer | cargo carrier火车goods-train | freight-train卡车goods-van | goods wagon | freight car | truck货运办公室goods-office | freight-department运费率freight | freight rates | goods rate运费carriage charges | shipping expenses | express charges车费cartage | portage运费预付carriage prepaid | carriage paid运费到付carriage forward | freight collect运费免除||免费carriage free协定运费conference freight | freight rate运费清单freight account托运单way-bill | invoice运送契约contract for carriage装运shipment | loading装上货轮to ship | to load | to take on a ship装运费shipping charges | shipping commission装运单||载货单shipping invoice装运单据shipping documents大副收据mate's receipt装船单shipping order提货单delivery order装船通知shipping advice包裹收据parcel receipt准装货单shipping permit租船契约charter party租船人charterer程租船||航次租赁voyage charter期租船time charter允许装卸时间lay days | laying days工作日working days连续天数running days | consecutive days滞期费demurrage滞期日数demurrage days速遣费despatch money空舱费dead freight退关short shipment | goods short shipped | goods shut out | shut-outs赔偿保证书(信托收据) letter of indemnity | trust receipt装载loading卸货unloading | discharging | landing装运重量shipping weight | in-take-weight卸货重量landing weight压舱ballasting压舱货in ballast舱单manifest船泊登记证书ship's certificate of registry 航海日记ship's log船员名册muster-roll（船员，乘客）健康证明bill of health光票clean bill不清洁提单foul bill有疑问提单suspected bill。
螺钉英文大全
101 DIN927 开槽无头轴肩螺钉slotted shoulder screws102 DIN928 焊接方螺母square weld nuts GB/T13680-92103 DIN929 焊接六角螺母hexagon weld nuts GB/T13681-92104 DIN931 六角头螺栓（半牙）hexagon head screws ISO4014 GB5782-86 105 DIN933 六角头螺栓（全牙）hexagon head screws ISO4017 GB5783-86 106 DIN934 六角头螺母(1型) hexagon full nuts ISO4032 GB6170-86107 DIN934 细牙六角头螺母(1型) hexagon full nuts ISO8673 GB6171-86108 DIN935 开槽六角螺母hexagon slotted and castle nuts ISO7035 GB6178-86 109 DIN936 六角头薄螺母hexagon thin nuts ISO4035 GB6172.1-86110 DIN937 六角头开槽薄螺母hexagon thin slotted and castle nuts ISO7038 GB6181-86111 DIN938 双头螺距（牙长=1D）studs metal (end=1d) GB897-88112 DIN939 双头螺距（牙长=1.25D）studs metal (end=1.25d)GB898-88113 DIN940 双头螺距（牙长=1.5D）studs metal (end=1.5d)114 DIN960 六角头细牙螺栓（半牙）hexagon head bolts,metric fine pitchthread ISO8765 GB5785-86115 DIN961 六角头细牙螺栓（全牙）hexagon head bolts,metric fine pitchthread ISO8676 GB5786-86116 DIN962 头部穿孔六角头螺栓additional shapes and versions for bolts117 DIN963 开槽沉头螺钉slotted countersund head screwsISO 2009 GB68-85118 DIN964 开槽半沉头螺钉slotted raised countersunk oval head screwsISO 2010 GB69-85119 DIN965 十字槽沉头螺钉cross recessed countersunk headscrews ISO7046 GB819-85120 DIN966 十字槽半沉头螺钉cross recessed raised countersunk headscrews ISO7047 GB820-85121 DIN970 六角头螺母hexagon nuts type-1122 DIN971 六角头螺母hexagon nuts type-2123 DIN972 细牙六角头螺母(2型) hexagon nuts with fine thread ISO8674 GB6176-86 124 DIN975 牙条(全螺纹) threaded rods(studdings)GB15389-94125 DIN976 螺纹销threaded pins(stud bolts)126 DIN979 六角头开槽薄螺母（2型）hexagon thin slotted and castle nuts127 DIN980 全金属六角锁紧螺母（1型）prevailling torque type hexagon nuts,all metall nuts ISO7199 GB6184-86128 DIN981 圆螺母locknuts ISO2982 GB812-88129 DIN982 六角头尼龙锁紧螺母prevailling torque type hexagon nuts,heavy type ,with nylon insert ISO7040 GB889.1-86130 DIN985 六角头薄型尼龙锁紧螺母prevailling torque type hexagon nuts,heavy type ,with nylon insert ISO10511 GB6172.2-86131 DIN986 六角盖型尼龙锁紧螺母prevailling torque typedomed capnuts with nylon insert132 DIN988 配合垫片shim rings133 DIN1052 木材连接用垫片washers for timber connectors134 DIN1151 沉头钢钉round plain head nails135 DIN1440 销钉专用垫片A型plain washers for clevis pins(A型) ISO8738136 DIN1441 销钉专用垫片plain washers for clevis pins137 DIN1444 带头销钉clevis pins with head ISO2341138 DIN1471 圆锥型槽销grooved pins,taper grooved ISO8744 GB/T13829.2139 DIN1472 圆锥型槽销(半槽)grooved pins,taper grooved halflength ISO8745 GB/T13829.2140 DIN1473 平行槽销(带倒角) grooved pins,parallel grooved full length ISO8740141 DIN1474 前端凹槽槽销grooved pins,reserve grooved half length ISO8741142 DIN1475 中部凹槽槽销grooved pins,centre grooved ISO8742143 DIN1476 圆头槽销grooved pins with round head ISO8746 GB/T13829.3144 DIN147 7沉头槽销grooved pins with countersunk head ISO8747145 DIN1479 六角螺母棒turnuckles(centre parts),made out of hexagon bar146 DIN1480 花篮螺栓turnuckles with eye bolt and hook bolt147 DIN1481 弹性圆柱销spring pins,heavy type ISO8752 GB879-86148 DIN1587 组合式盖型螺母hexagon domed cap nuts GB802-88149 DIN1804 开槽圆螺母（配合沟头扳手）slotted round nuts for hook spanner150 DIN1816 圆螺母（带插销孔）round nuts with set holes151 DIN2093 盘型弹簧垫圈disc springs152 DIN3017 喉箍hose clamps153 DIN3404 润滑油嘴（旋扭头）lubricating nipples,button head154 DIN3567 管夹shackles for conduilts155 DIN3570 U型螺栓stirrup bolts(U-bolts)156 DIN6319 球面垫圈spherical washers,conical seats GB849-88157 DIN6325 圆柱销parallel pins ISO8734158 DIN6330 厚六角螺母hexagon nuts ,1.5d GB56-88159 DIN6331 厚六角法兰面螺母hexagon nuts ,1.5d with collar GB6177-86160 DIN6334 长六角螺母hexagon nuts ,3d161 DIN6797-A 外齿锁紧垫圈external teeth lock washers GB862.1-87162 DIN6797-I 内齿锁紧垫圈internal teeth lock washers GB861.1-87163 DIN6798-A 外锯齿锁紧垫圈external teeth serrated lock washers GB862.2-87 164 DIN6798-I 内锯齿锁紧垫圈internal teeth serrated lock washers GB861.2-87165 DIN6799 开口挡圈retaining rings for shafts(E-rings),circlips GB896-76166 DIN6885 平键（A型）parallel keys(form A ) ISO773/2491167 DIN6888 半圆键woodruff keys ISO3912168 DIN6899 嵌环（支撑环）thimbles169 DIN6900 机器螺钉和垫圈组合件screws and washers assemblies GB9074.1-.17 170 DIN6901 自攻螺钉和垫圈组合件tapping screws and washersassemblies GB9074.18-.23171 DIN6912 薄型带孔内六角圆柱头螺钉hexagon socket head cap screws with hole,low head172 DIN6914 大六角头螺栓hexagon head bolts with large head(friction grip bolts)173 DIN6915 大六角螺母hexagon nuts with large wideth across flat(friction grip nuts)174 DIN6916 大垫圈round washers for friction grip bolts175 DIN6917 楔型方垫圈spuare taper washers for friction grip bolts onT-sections176 DIN6923 六角法兰面螺母hexagon flange nuts ISO4161 GB6177-86177 DIN6925 全金属六角锁紧螺母(2型）prevailing torque type hexagon nuts,all metallic nuts ISO7042 GB6185.1-2000178 DIN7337 开口型抽芯铆钉（沉头、扁圆头）blind rivets GB12617/12618 179 DIN7338 扁平头半空心/全空心铆钉rivets for brake and clutchlining GB875/975-86180 DIN7343 螺旋夹紧销spiral pins ISO8750181 DIN7346 轻型弹性圆柱销spring pins,light type ISO13337182 DIN7349 重型弹性圆柱销用垫圈washers for bolts with heavy type spring pinss183 DIN7500 ISO公制螺纹螺钉(多种头型) threadforming screws for ISO-metricthread184 DIN7504 自攻自钻螺钉(多种头型) self-drilling tapping screws185 DIN7513 开槽切削螺纹螺钉(多种头型) thread cutting screws186 DIN7516 十字槽切削螺纹螺钉(多种头型) thread cutting screws cross recess187 DIN7965 T型四爪螺母tee nuts with pronge188 DIN7968 钢结构用六角头螺栓连接副hexagon head fitted bolts for steel structures GB1228/1229/1230189 DIN7971 开槽盘头自攻螺钉pan head tapping screws with slot ISO1481 GB5282-85190 DIN7972 开槽沉头自攻螺钉countersunk flat head tapping screws with slot ISO1482 GB5283-85191 DIN7973 开槽半沉头自攻螺钉raised countersunk oval head tapping screws with slot ISO1483 GB5284-85192 DIN7976 六角头自攻螺钉hexagon tapping screws ISO1479 GB5285-85 193 DIN7980 圆柱头螺钉用弹簧垫圈spring lock washers for screws with cylindrical headsISO8738194 DIN7981 十字槽盘头自攻螺钉pan head tapping screws with cross recessed ISO7049 GB845-85195 DIN7982 十字槽沉头自攻螺钉countersunk flat head tapping screws with cross recessed ISO7050 GB846-85196 DIN7983 十字槽半沉头自攻螺钉raised countersunk oval head tapping screws with cross recessed ISO7051 GB847-86197 DIN7984 薄型内六角圆柱头螺钉hexagon socket head cap screws with，reduced head198 DIN7985 十字槽盘头螺钉pan head screws with cross recessed ISO7045 GB818-85 199 DIN7989 钢结构用垫圈washers for steel structures GB1230-84200 DIN7990 钢结构用六角头螺栓hexagon head bolts for steel structuresGB1229-84201 DIN7991 内六角沉头螺钉hexagon socket countersunk head screws ISO10642202 DIN7993 轴用钢丝挡圈roundwire snap rings for shafts GB895.2-86203 DIN7995 十字槽半沉头木螺钉cross recessed raised countersunk head wood screws GB952-86204 DIN7996 十字槽圆头木螺钉cross recessed round head wood screws GB950-86 205 DIN7997 十字槽沉头木螺钉cross recessed countersunk head woodscrews GB951-86206 DIN8140 螺纹护套（普通\自锁等）ciol inserts,coarse,fine thread,silf locking207 DIN9021 大外径垫圈washers,outside diameter appro.3d ISO7093 GB96-85 208 DIN11024 弹簧卡子spring cotter for a bolt209 DIN13257 平板螺栓belting bolts (elevator bolts)210 DIN18182 干壁钉（墙板钉）dry wall screws211 DIN28129 环型螺母lifting nuts(eye nuts)GB63-88212 DIN70952 圆螺母用止退垫圈tab washers for slotted round nuts GB858-88。
技术培训紧固常用中英对照
一.孔别紧固件常用英文对照1.割沟Slotted2.十字穴Phillips3.米字穴Pozidriv(cross recess)4.十字割沟Slotted phillips5.四角孔Square6.十字方孔Square phillips7.六角孔hexagon 8.方孔割沟Square slotted 9.梅花穴Six-lobe 10.三角孔Triangle 11.Y型槽Y-type 12.斜Y槽Tri-wing 13.五等角5-Point 二,电镀1.电镀锌Zinc plated2.白皮Plain finished3.五彩Yellow zinc plated4.镀镍Nickel plated5.热浸锌Hot dip galvanized6.黑锌Black zinc plated7.镀黑Black finished 8.染黑Black oxide 9.(黑)磷酸盐(black)Phosphated 10.黄铜Brass 11.镀青蓝Unichrome plated 12.古铜A.C Brontze13.青古铜Antique brass 14.机械镀锌Mechanical galvanized 15.绿锌Green zinc plated 16.电锌腊Zinc plated&waxed 17.达克锈Dacrotizing plated18.久美特Geomet 19.耐落Nylok陆锈宝Rupst 20.翡丽雅特ViridAct 21.美加力Magni三.常用名称1.螺丝类中文名称方头螺栓沉头方劲螺栓沉头沉带榫螺栓(大)半圆头方颈螺栓六角头铰制孔用螺栓英文名称Square head boltsFlat countersunk square neck boltsFlate countersunk nib boltsCup head square neck (with large head)boltHexagon fit bolts对应标准GB/T 8-88 C级GB/T 10-88GB/T 11-88GB/T 14/15-88GB/T 27-88 A和B级六角头螺杆带铰制孔用螺栓(细杆) Hexagon fit bolts with split pin hole on shank(Reduced shank) GB/T 28-88 A和B级十字槽凹穴六角头螺栓六角头头部带孔螺栓T型槽用螺栓加强半圆头方颈螺栓活节螺栓地角螺栓头角头螺栓六角头法兰面螺栓外六角花法兰面螺栓Cross recessed hexagon bolts with indentationHexagon bolts with wire holes on headBolt for T-slotStrengthened cap head square neck boltsEye boltsEyelet boltsHexagon head boltsHexagon flange boltsSteel hexalobular head bolt with small flangeGB/T 29.2-88 A和B级GB/T 32.1-88 A和B级GB/T 35.1-88 B级GB/T 794.1-93GB/T798-88GB/T799-88GB/T5780-2000 C级GB/T5789-86 B级DIN 34801-99PDF created with pdfFactory Pro trial version .中文名称英文名称对应标准双头螺柱bm=1d等长双头螺柱B级螺杆3.螺钉类中文名称开槽圆柱头螺钉开槽沉头螺钉开槽半沉头螺钉内六角圆柱头螺钉内六角平圆头螺钉内六角沉头螺钉十字槽盘头螺钉十字槽半沉头螺钉十字槽圆柱头螺钉滚花高头螺钉滚花平头螺钉内六角花形盘头螺钉内六角圆柱头轴肩螺钉4.自攻螺钉中文名称十字槽盘头盘自攻螺钉十字槽沉头盘自攻螺钉十字槽盘头盘自攻锁紧螺钉十字槽凹穴六角头自攻螺钉Double end studs-bm=1dDouble end studs(clamping type)-product grade AThread rods英文名称Slotted cheese head screwsSlotted countersunk flat head screws (mon head style)Countersunk slotted raised head screws(mon head style)Hexagon socket head cap screwsHexagon socket button head screwsHexagon socket countersunk head screwsPan head screw with cross recessCountersunk raised head screws(mon head style)with cross recessCheese head screws with cross recessKnurled thumb screwsKnurled screwsHexagon lobular socket pan head scerwsHexagon socket head shoulder scerws英文名称Cross recessed pan head tapping screwsCross recessed countersunk head tapping screwsCross recessed pan head thread forming screwsCross recessed hexagon head tapping screws with indentationGB/T 897-88GB/T 901-88GB/T 15389-94对应标准GB/T65-2000GB/T68-2000 eqv ISO 2009-94GB/T69-2000 eqv ISO 2010-94GB/T70.1-2000 eqv ISO 4762.2-97GB/T70.2-2000 eqv ISO 7380-97GB/T70.3-2000 eqv ISO 10642-97GB/T818-2000 eqv ISO 7045-94GB/T820-2000 eqv ISO 7047-94GB/T822-2000 eqv ISO 7048-94GB 834-88GB 835-88GB 2672-86GB/T 5281-85对应标准GB 845-85GB 846-85GB 6560-86GB 9456-98十字槽自攻螺钉-刮削端(用于精密机械) cross recessed tapping screws-scrape point(fasters for fine mechanics) GB/T 13806-2墙板自攻螺钉十字槽盘头自钻自攻螺钉六角凸缘自攻螺钉Dry wall screwsCross recessed pan head self-drilling tapping screwsHexagon head tapping screws with collarGB/T14210-93GB/T15856.1-95GB/T16824.1-97 eqv ISO 7053-92中文名称英文名称对应标准方螺母-C级六角螺母-C级六角厚螺母六角薄螺母蝶形螺母组合式盖形螺母球面六角螺母滚花高螺母1型非金属嵌件六角锁紧螺母盖形螺母六角薄螺母无倒角六角法兰面螺母1型六角开槽螺母全金属六角锁紧螺母焊接方螺母焊接六角螺母平头铆螺母6.挡圈中文名称锥销锁紧挡圈轴肩挡圈螺钉紧固轴端挡圈孔用弹性挡圈-A型轴用弹性挡圈开口挡圈钢丝锁圈夹紧挡圈Square nuts-product grade CHexagon nuts-product grade CHexagon thick nutsHexagon thin nutsWing nutsAcorn nutsHexagon nut with raised facekunrled nut with collarPrevailing torque type hexagon nuts(with non-metallic insert).style 1Acorn nutsHexagon thin nuts (unchamfered)Hexagon nuts with flangeHexagon slotted and castle nuts.style1Prevailing torque type all-metal hexagon nutssquare weld nutHexagon weld nutsFlat head riveted nuts英文名称Lock ring with corne pinRings for shouderLock rings at the end of shaft with screwCirclips for holes -typeACirclips for shaft -typeA"E"ringsRound coire circlipsCrip ringsGB/T39-88GB/T41-2000eqv ISO 4034-99GB/T56-88GB/T6172.1-2000eqvISO 4035-99GB/T 62-88GB/T 802-88GB/T 804-88GB/T 806-88GB/T889.1-2000eqv 7040-97GB/T 923-88GB/T6174-2000eqvISO 4036-99GB/T6177.1-2000eqv ISO 4161-99GB/T 6178-86GB/T 6184-2000eqv ISO 7719-97GB/T 13680-92GB/T 13681-92GB/T 17880.1-99对应标准GB/T 883-86GB/T 891-86GB/T 893.1-86GB/T 894.1-86GB/T 895-2-86GB/T 896-86GB/T 921-86GB/T 960-867.垫圈类中文名称英文名称对应标准弹簧垫圈(标准型)平垫圈-C级大平垫圈鞍形弹性垫圈内齿锁紧垫圈内锯齿锁紧垫圈外锯齿锁紧垫圈波型弹性垫圈锥形锁紧垫圈锥形锯齿锁紧垫圈8.销中文名称开口销圆锥销螺纹圆柱销销轴平头铆钉平锥头铆钉（粗制）空心铆钉封闭型扁圆头抽芯铆钉开口型沉头抽芯铆钉Single coil spring lock washers (normal type)Plain washersPlain washers-large seriesCurved spring washersLock washers internal teethSerrated lock washers internal teethSerrated lock washers external teethWave spring washersCountersunk external toothed look washersCountersunk serrated external toothed lock washers英文名称Split pinsTaper pinsParaller pins with external threadClevis pins with headFlat head rivetsCone-head rivets-blackTubular rivetsMushroom head break mandred closed end blind rivets120 deg flush head break mandrel blind rivetsGB/T 93-87GB/T 95-85eqv ISO 7091-2000GB/T 96-85 A和B级GB/T 860-87GB/T 861.1-87GB/T 861.2-87GB/T 862.2-87GB/T 955-87GB/T 956.1-87GB/T 956.2-87对应标准GB/T 91-2000eqvISO1234-97GB/T 117-2000eqvISO2339-86GB/T 878-86GB/T 882-86GB/T 109-86GB/T 864-86GB/T 876-86GB/T 12615-90GB/T 12617-909.紧固件-组合件和连接副中文名称英文名称紧固件常用英文对照对应标准钢结构用高强度大六角头螺栓钢结构用高强度大六角头螺母钢结构用高强度大六角头垫圈High strength bolts with large hexagon head for steel structuresHigh strength large hexagon nuts for steel stucturesHigh strength plain washers for steel structuresGB/T1230-91GB/T1229-91GB/T1230-91钢结构用扭剪型高强度螺栓连接副Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures GB/T3632-95十字槽盘头螺钉,弹簧垫圈和平垫圈组合件Cross recessed pan head screw ,single coil spring lock washer and plain washer assemblies GB/T 9074-.4-88无头焊钉圆柱头焊钉机械焊接螺钉Headless for stud weldingCheese head studs for stud weldingWeld screws with metric threadGB/T 10432-89GB/T 10433-89DIN 34817-2001Word 是学生和职场人士最常用的一款办公软件之一，99.99%的人知道它，但其实，这个软件背后，还有一大批隐藏技能你不知道。
紧固件常用英语单词
中文名称 英文名称六角螺丝(栓) HEX HEAD CAP SCREWS(HEX BOLTS)六角机械螺丝 HEX HEAD MACHINE BOLTS六角木牙螺丝 HEX LAG BOLTS四角螺丝 SQUARE HEAD BOLTST头螺丝 T HEAD BOLTS马车螺丝 CARRIAGE BOLTS环首螺丝 EYE BOLTS内六角孔螺丝 HEX SOCKET CAP SCREWS固定螺丝 SET SCREWS螺椿栓 STUD BOLTS螺旋椿 SCREW STUDS轮壳螺栓 WHEEL BOLTS翼形螺丝 WING SCREWS自攻螺丝 SELF TAPPING SCREWS自削螺丝 THREAD CUTTING SCREWS钻尾螺丝 SELF DRILLING SCREWS旋入螺丝 DRIVE SCREWS机械螺丝 MACHINE SCREWS木螺丝 WOOD SCREWS家具螺丝 FURNITURE SCREWS塑板螺丝 CHIPBOARD SCREWS墙用螺丝 DRYWALL SCREWS基础螺栓 FOUNDATION BOLTSU型螺栓 U BOLTS勾头螺栓 HOOK BOLTS套挂螺丝 TOGGLE BOLTS突缘螺丝 FLANGE BOLTS轨道螺栓(鱼尾螺丝) TRACK BOLTS耐候钢螺丝 CORTEN STEEL HEAVY HEX BOLTS扭矩控制螺栓 T.C.BOLTS高张力螺栓 HIGH STRENGTH BOLTS剪力钉(焊接螺丝) WELDING STUDS螺丝附华司组合 SCREWS AND WASHERS ASSEMBLED(SEMS)大尺寸螺栓 BIG SIZE BOLTS不锈钢小螺丝 STAINLESS STEEL SHEET METAL SCREWS不锈钢大螺丝 STAINLESS STEEL BOLTS铜螺丝 BRASS SCREWS铝螺丝 ALUMINUM SCREWS合金钢螺丝 ALLOY STEEL SCREWS电子螺丝 ELECTRONIC SCREWS微小精密螺丝 MICRO SCREWS塑料螺丝 PLASTIC SCREWS复合材料用螺丝 PARTICLE BOARD SCREWS钛合金螺丝 TITANIUM ALLOY BOLTS钛、锆、钼、铌等螺丝、零件、材料 TI,ZR,MO,NB PARE METAL BOLTS PARTS 拇指螺丝 THUMB SCREWS双头牙螺丝 DOUBLE END SCREWS HANGER BOLT车辆(汽车)螺丝、螺帽 AUTOMOTIVE FASTENERS航天用螺丝 AEROSPACE FASTENERS飞机特殊扣件 SOURCE CONTROL BOLTS拉栓 BLIND BOLTS面板螺丝 PANEL FASTENERS电梯螺丝 ELEVATOR BOLTS四角头固定螺丝 SQUARE SET SCREWS大头马车螺丝 STEP BOLTS单向螺丝 ONE WAY LAG SCREWS管夹螺丝 HOSE CLAMP SCREWS不锈钢固定螺丝 STAINLESS STEEL HEX SOCKET CAP SCREWS不锈钢内六角螺丝 STAINLESS STEEL HEX SOCKET CAP SCREWS铰链螺丝 HINGE SCREWS货柜螺丝 CONTAINER SCREWS复合材料钻尾螺丝 BI-METAL SELF DRILLING SCREWS三角牙螺丝 TRILOBULAR THREAD SCREWS高低牙螺丝 HIGH LOW SCREWS夹板用螺丝 PARTICLE BOARD SCREWS马桶螺丝 TOILET CLOSET BOLTS特长螺丝 SPECIAL LONGER SCREWS建业螺丝 BUILDING FASTENERS不锈钢六角螺丝 STAINLESS STEEL HEX SOCKET CAP SCREWS其它特殊螺丝 SPECIAL SCREWS OR BOLTS不锈钢特殊螺丝 SPECIAL STAINLESS STEEL SCREWS宽牙螺丝（粗牙螺丝） COARSE THREAD SCREWS链带螺丝 COLLATED SCREWS水泥螺丝 CONCRETE SCREWS板模螺丝 CONSTRUCTION BOLTS锌蝶螺丝 DIE CAST WING SCREWS; ZINC ALLOY重型车螺丝 HEAVY DUTY WHEEL HUB BOLTS内六角固定螺丝 HEX SOCKET SET SCREWS复合材料用螺丝（夹板用） PARTICLE BOARD SCREWS犁壁螺丝 PLOW BOLTS机(踏)车用螺丝、轴心 SCREWS AND SHAFTS FOR MOTORCYCLE OR BICYCLE 针车用螺丝、轴心 SCREWS AND SHAFTS FOR SEWING MACHING止付螺丝 SOCKET SET SCREWS不锈钢宽牙螺丝 STAINLESS STEEL COARSE THREAD SCREWS不锈钢高低牙螺丝 STAINLESS STEEL HIGH-LOW THREAD SCREWS不锈钢机械螺丝 STAINLESS STEEL MACHINE SCREWS不锈钢钻尾螺丝 STAINLESS STEEL SELF DRILLING SCREWS不锈钢自攻螺丝 STAINLESS STEEL SELF TAPPING SCREWS不锈钢自削螺丝 STAINLESS STEEL THREAD CUTTING SCREWS不锈钢三角牙螺丝 STAINLESS STEEL TRI-LOBULAR THREAD SCREWS不锈钢木螺丝 STAINLESS STEEL WOOD SCREWS套挂螺栓及螺丝 TOGGLE BOLTS钛合金膨胀螺丝 TITANIUM ALLOY EXPANSION BOLTS中文名称 英文名称六角盖头螺帽 HEX CAP NUTS六角锯齿螺帽 HEX SERRATED NUTS六角轮缘螺帽 HEX FLANGE NUTS高脚螺帽 HEX COUPLING NUTS(HIGH NUTS)圆螺帽 ROUND NUTS四角螺帽 SQUARE NUTS管用螺帽 PIPE NUTS轮壳螺帽 WHEEL NUTS蝶型螺帽 WING NUTSU形螺帽 U NUTST形螺帽 T NUTS环首螺帽 EYE NUTS齿形螺帽 KEP NUTS齿花螺帽 CLINCH NUTS耐候钢六角重型螺帽 CORTEN STEEL HEAVY HEX NUTS焊接螺帽 WELD NUTS高张力螺帽 HEIGH STRENGTH NUTS建业用螺帽 STRUCTURAL NUTS不锈钢螺帽 STAINLESS STEEL NUTS铜螺帽 BRASS NUTS铝螺帽 ALUMINUM NUTS合金钢螺帽 ALLOY STEEL NUTS重型车螺帽 HEAVY DUTY WHEEL HUB NUTS铁器焊接袋帽 ACORN CAP NUTS金属预置扭矩式螺帽 ALL-METAL PREVAILING TORQUE TYPE NUTS壁虎螺帽 ANCHOR NUTS大尺寸螺帽 BIG SIZE NUTS铁盖袋帽 CLOSED END ACORN NUTS盘形华司螺帽 CONICAL WASHER NUTS铁盖+尼龙圈组合盖帽 DIN 986 DOMED CAP NUTS突缘尼龙盖帽 FLANGE NYLON INSERT LOCK NUTS平面华司螺帽 FLAT WASER NUTS六角割沟螺帽 HEX SLOTTED NUT自锁螺帽 SELF-LOCKING NUTS制止螺帽 SLIDING NUTSSLN-自动防松螺帽 SLN SELF-LOCKING NUTS其它特殊螺帽 SPECIAL NUTS弹簧螺帽 SPRING NUTS不锈钢突缘螺帽 STAINLESS STEEL FLANGE NUTS不锈钢六角轮缘尼龙螺帽 STAINLESS STEEL FLANGE NYLON INSERT LOCK NUTS 不锈钢六角重型螺帽 STAINLESS STEEL HEAVY HEX NUTS不锈钢六角螺帽 STAINLESS STEEL HEX NUTS不锈钢尼龙嵌入螺帽 STAINLESS STEEL NYLON INSERT LOCK NUTS锌压属螺帽 ZINC DIE CASTING NUTS普通六角螺帽 HEX NUTS六角重型螺帽 HEAVY HEX NUTS薄型螺帽 HEX JAM NUTS尼龙嵌入防松螺帽 NYLON INSERT LOCK NUTS机械螺丝用六角螺帽 HEX MACHINE SCREW NUT中文名称 英文名称合金钢线材盘元 ALLOY STEEL WIRE ROD球状化线材 ANNEALING WIRE AND ROD黑铁丝 BLACK WIRE黄铜棒线 BRASS WIRE AND ROD磨光棒钢 BRIGHT STEEL BAR(HEX/ROUND/SQUARE)铜合金线 COPPER ALLOY WIRE线切割线 E.D.M CUTTING WIRE快削钢线材盘元 FREE CUTTING STEEL WIRE ROD线材 IRON OR STEEL WIRE线材盘元 IRON OR STEEL WIRE ROD洋白铜线 NICKEL SILVER WIRE磷青铜线 PHOSPHATE BRONZE WIRE不锈钢条棒 STAINLESS STEEL BAR(ROUND/HEX/SQUARE)不锈钢冷锻线材 STAINLESS STEEL COLD HEA DING WIRE不锈钢线(抽线后) STAINLESS STEEL DRAW WIRE不锈钢线材 STAINLESS STEEL WIRE不锈钢线材及盘元 STAINLESS STEEL WIRE AND ROD棒钢 STEEL BAR(HEX/ROUND/SQUARE)转回90度碾线头机 90讧EVOLVING WIRE TWISTING MACHINE气动拉钉机 AIR RIVETER各式螺丝类产品自动包装 AUTOMATIC PACKAGING FOR ALL KINDS OF PACKAGING 自动包装机 AUTOMATIC PACKING MACHINE螺丝制造搓牙机械 AUTOMATIC THREAD ROLLING MACHINE螺丝割尾加工机械 AUTOMATIC THREAD SLOTTING MACHINE螺丝制造成型机械 AUTOMATIC TRIMMING MACHINE拉钉打头机 BLIND RIVET HEADING MACHINE螺丝、螺帽成型机 BOLT FORMERS,NUTS FORMERS,HEADERS螺丝、螺帽热处理 BOLT NUT AND SCREWS HEAT TREATMENT螺丝、螺帽热处理炉 BOLT NUT AND SCREWS HEAT TREATMENT FURNACES球状化电器炖炉 CARBURIZING FURNACE VACUUM AND BELL TYPE FURNACE超防锈复合瓷膜 CERAMIC COATING连续式光辉渗碳淬火炉 CONTINUOUS BRIGHT CARBURIZING QUENCHING FURNACE 连续式光辉调质淬火炉 CONTINUOUS BRIGHT HARDENING QUENCHING FURNACE 中、高热镀锌光辉连续炉 CONTINUOUS BRIGHT HEAT TREAT FURNACE连续式光辉热处理炉 CONTINUOUS TYPE BRIGHT HEAT TREATMENT FURNACE 螺丝割尾及特殊割遘加工 MACHINE SCREW SHANK SLOTTING螺丝钻孔加工 SCREW SHANK DRILLING鸡眼上下模 EYELETS DIES一般线材、盘元、退火炉 GENERAL WIRE,WIRE ROD,ANNEALING FURNACE 倒立式滑落型伸线机 HANDSTAND TYPE WIRE DRAWING MACHINE十字冲模 HEADER PUNCHES IN VARIOUS DRIVES成型冲模 HEADER PUNCHES IN VARIOUS DRIVES螺丝打头机 HEADING MACHINE螺丝制造高速搓牙机械 HIGH SPEED AUTOMATIC THREAD ROLLING MACHINE高中低周波感应加热炉 HIGH,MEDIUM,LOW FREQUENCY INDUCTION HEATER空心打头机 HOLLOW HEADING MACHINE热浸镀锌螺丝、螺帽 HOT DIP GALVANIZING BOLTS AND NUTS机械镀锌 MECHANICAL GALVANIZED迷你成型机 MINI-FORMERS成品自动收线机 NON-STOP COILER精抽自动收线机 NON-STOP COILER(SKINPASS)螺帽模 NUT FORMING DIES螺帽成型模 NUTS FORMERS特殊零件成型机 PARTS FORMING MACHING冲模 PUNCH DIES冲子 PUNCH PINS罗拉成型机 ROLLERS FORMERS机(踏)车用螺丝成型机 SCREW FOR MOTORCYCLE OR BICYCLE HEA DING MACHINE止付螺丝成型机 SET SCREWS FORMERS套高成型机 SOCKETS FORMERS一般线材、盘元、螺丝合金炖炉 SPHEROIDIZING BRIGHT ANNEALING FURNACE球状化热处理炉 SPHEROIDIZING HEAT TREATMENT FURNACE攻牙机 TAPPING MACHINE螺丝攻、车刀、模具 TAPS DIES AND TOOLS搓牙机铁屑分离装置 THREAD CHIP SEPARATOR滚牙轮 THREAD ROLLING DIES牙板 THREAD ROLLING DIES PLATES精密油压滚牙机 HYDRAULIC THREAD ROLLING MACHINES模具 TOOLS六角整头模 TRIMMING DIES HEXAGAN碳化钨模具 TUNGSTEN CARBIDE DIE镀钛处理(TiN)专业加工服务 TiN HARD COATING FOR CUTTING TOOLS AND PUNCH BY PVD 电镀化学原料 VARIOUS ELECTROPLATING CHEMICALS环规校正 CALIBRATION FOR RING GAGE环规、牙规、三线规校正 CALIBRATION FOR RING GAGE, ATHREAD GAGE, 3 WIRE GAGE螺丝、螺帽品检量测仪器 FASTENERS INSPECTION AND MEASUREMENT INSTRUMENTS螺丝、螺帽成型攻牙专用油 FORMING AND TAPPING OILS FOR BOLTS AND NUTS FORMERS螺丝、螺帽五金等检验 INSPTECTION SERVICES FOR FASTENERS AND HARDWARE德国SCHATZ扭力机代理 REPRESENTATIVE OF SCHATZ TORQUE MACHINISO质量保证系统 ISO QUALITY ASSURANCE SYSTEM生产管理系统 PRODUCTION CONTROL SYSTEM物料管理系统 MATERIAL CONTROL SYSTEM中文名称 英文名称齿轮 GEARS不锈钢牙条棒 STAINLESS STEEL HREAD ROD马达轴承轴心组件 BEARING SHAFT(MOTOR)轴承轴心 BEARING SHAFT开口铆钉 BLIND RIVETS长形拉帽 BLIND RIVET NUTS拉帽 BLIND NUTS拉钉 BLIND RIVETS实心梢 CLEVIS PINS AND STRAIGHT PINS弹片 CLIPS卷钉 COIL NAILS冷锻零件 COLD FORMING PART开口销 COTTER PINSE型环 E-RINGS膨胀螺栓 EXPANSION ANCHOR BOLTS鸡眼钉 EYELETS RIVETSR型销 SNAP PINS闸、锁 LATCHES AND KEEPER ASSEMBLEDS其它特殊铆钉 OTHER SPECIL RIVETS销 PINS格式管夹、管束 PIPE HANGER铆钉 RIVETS螺旋锔及螺旋圈 SCREW HOOK AND SCREW RINGS中空钉 SEMI-TUBULAR RIVET开叉钉 SPLIT DRIVE ANCHORS弹簧华司 SPRING WASHERS弹簧蝴蝶夹 SPRING WINGS不锈钢华司 STAINLESSSTEEL WASHERS钢铁钉 STEEL AND IRON NAILS搓牙铁钉 THREAD NAILS钛合金铆钉 TITAIUM ALLOY RIVETS管形铆钉 TUBULAR RIVETS华司 WASHERS真空热处理 VACUUM HEAT TREATMENT螺丝、螺帽、五金、DIY扣件 FASTENERS合金钢工具 ALLOY STEEL TOOLS螺栓模 BOLT HEA DING DIES手动拉钉钳 HAND RIVETER船舶链 ANCHOR CHAIN脚踏车链锁 BICYCLE CHAIN LOCKS螺丝起子 BIT罗拉 CHAIN ROLLER特殊铆合扣件 COLLARS(A BLINDFASTENER FOR HUCK INTL)装饰链 DECORATIVE CHAINS自攻螺纹衬套 ENSAT THREADED INSERTS六角扳手 HEXAGON KEYS超音螺纹压入式螺纹自动锁扣 THREADED INSERTS FOR PLASTIC INJECTION MOULDEINGS 汽车特殊杆接件 SPECIAL AUTO-MOBILE FASTENER AS YOUR NEEDS螺纹护套 RECOIL INSERTS链条用滚子 ROLLER FOR ROLLER CHAIN金属板镶嵌组件及自动夹扣组件 SHEET METAL FASTENERS工具套筒组件 SOCKET WRENCH SETS不锈钢链 STAINLESS STEEL CHAINS轭子 T-YOKE轮胎链 TIRE CHAINS狗链 DOG CHAINS喇叭头轭铁 U-YOKE,T-YOKE FOR SPEAKER不锈钢输送带轮用轨道 STAINLESS WHEEL'S RACK FOR TRANSPORTER 工业用链 INDUSTRIAL STEEL LINK CHAINS拖链安全链 TOW CHAINS AND SAFETY CHAINS机车离合器零件 MANUFACTURE OF MOTORCYCLE'S CVT PARTS牙条棒 THREAD ROD。
螺丝紧固件英文词汇
螺丝紧固件英文词汇机(踏)车用螺丝、轴心Screws And Shafts For Motorcycle Or Bicycle针车用螺丝、轴心Screws And Shafts For Sewing Maching止付螺丝Socket Set Screws不锈钢宽牙螺丝Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝Stainless Steel High-Low Thread Screws不锈钢机械螺丝Stainless Steel Machine Screws不锈钢钻尾螺丝Stainless Steel Self Drilling Screws不锈钢自攻螺丝Stainless Steel Self Tapping Screws不锈钢自削螺丝Stainless Steel Thread Cutting Screws不锈钢三角牙螺丝Stainless Steel Tri-Lobular Thread Screws插片壁虎 Steel Ceiling Anchors内迫壁虎 Drop in Anchors碳钢锤钉壁虎 Steel Hit Anchors碳钢六角螺帽Steel Hex Coupling Nuts强力车修壁虎 Wedge Anchors外迫壁虎 Cut Anchors化学壁虎 Chemical Anchors不锈钢重载胀栓Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽 Tie Wire Anchors锌合金打入式壁虎 Hammer Drive Anchors弹簧螺帽 Strut Nuts兰花夹系列Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎 Hollow Wall Anchors套管式壁虎 Sleeve Anchors打入式壁虎鱼形尼龙壁虎 Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors)强力式锤钉壁虎 Hit Anchors电梯壁虎 Bolt Anchors重载壁虎Heavy duty anchors两片夹 Loxin Masonry Anchors定位螺栓 Set Bolts长型兰花夹 Short Strap Anchors工具棒Drop in Setting Tools象脚壁虎Elephant foot anchors水泥预埋件 Concrete Insert翻边胀轴Drop in Anchor with Lip冲件 Legs Drywall Anchors六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽 Round Nuts四角螺帽 Square Nuts管用螺帽 Pipe Nuts轮壳螺帽 Wheel Nuts蝶型螺帽 Wing NutsU形螺帽 U NutsT形螺帽 T Nuts环首螺帽 Eye Nuts齿形螺帽 Kep Nuts齿花螺帽 Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽 Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽 Structural Nuts不锈钢螺帽 Stainless Steel Nuts铜螺帽 Brass Nuts铝螺帽 Aluminum Nuts合金钢螺帽 Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts壁虎螺帽 Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽 Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽 Self-Locking Nuts制止螺帽 Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽 Special Nuts弹簧螺帽 Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts 普通六角螺帽 Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut六角螺丝(栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝Hex Head Machine Bolts六角木牙螺丝Hex Lag Bolts四角螺丝Square Head BoltsT头螺丝T Head Bolts马车螺丝 Carriage Bolts环首螺丝 Eye Bolts内六角孔螺丝Hex Socket Cap Screws固定螺丝 Set Screws螺椿栓 Stud Bolts螺旋椿 Screw Studs轮壳螺栓 Wheel Bolts翼形螺丝 Wing Screws自攻螺丝 Self Tapping Screws自削螺丝Thread Cutting Screws钻尾螺丝Self Drilling Screws旋入螺丝 Drive Screws机械螺丝 Machine Screws木螺丝 Wood Screws家具螺丝 Furniture Screws塑板螺丝 Chipboard Screws墙用螺丝 Drywall Screws基础螺栓 Foundation BoltsU型螺栓 U Bolts勾头螺栓 Hook Bolts套挂螺丝 Toggle Bolts突缘螺丝 Flange Bolts轨道螺栓(鱼尾螺丝) Track Bolts耐候钢螺丝Corten Steel Heavy Hex Bolts扭矩控制螺栓 T.C.Bolts高张力螺栓 High Strength Bolts剪力钉(焊接螺丝) Welding Studs螺丝附华司组合Screws And Washers Assembled(Sems) 大尺寸螺栓Big Size Bolts不锈钢小螺丝Stainless Steel Sheet Metal Screws不锈钢大螺丝Stainless Steel Bolts铜螺丝 Brass Screws铝螺丝 Aluminum Screws合金钢螺丝 Alloy Steel Screws电子螺丝 Electronic Screws微小精密螺丝 Micro Screws塑料螺丝 Plastic Screws复合材料用螺丝Particle Board Screws钛合金螺丝 Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料Ti,Zr,Mo,Nb Pare Metal Bolts Parts 拇指螺丝 Thumb Screws双头牙螺丝Double End Screws Hanger Bolt车辆(汽车)螺丝、螺帽 Automotive Fasteners航天用螺丝 Aerospace Fasteners飞机特殊扣件Source Control Bolts拉栓 Blind Bolts面板螺丝 Panel Fasteners电梯螺丝 Elevator Bolts四角头固定螺丝Square Set Screws大头马车螺丝 Step Bolts单向螺丝One Way Lag Screws管夹螺丝Hose Clamp Screws不锈钢固定螺丝Stainless Steel Hex Socket Cap Screws不锈钢内六角螺丝Stainless Steel Hex Socket Cap Screws铰链螺丝 Hinge Screws货柜螺丝 Container Screws复合材料钻尾螺丝Bi-Metal Self Drilling Screws三角牙螺丝 Trilobular Thread Screws高低牙螺丝High Low Screws夹板用螺丝Particle Board Screws马桶螺丝Toilet Closet Bolts特长螺丝Special Longer Screws建业螺丝 Building Fasteners不锈钢六角螺丝Stainless Steel Hex Socket Cap Screws其它特殊螺丝 Special Screws Or Bolts不锈钢特殊螺丝Special Stainless Steel Screws宽牙螺丝（粗牙螺丝） Coarse Thread Screws链带螺丝 Collated Screws水泥螺丝 Concrete Screws板模螺丝 Construction Bolts锌蝶螺丝Die Cast Wing Screws; Zinc Alloy重型车螺丝Heavy Duty Wheel Hub Bolts内六角固定螺丝Hex Socket Set Screws复合材料用螺丝（夹板用）Particle Board Screws犁壁螺丝 Plow Bolts不锈钢木螺丝Stainless Steel Wood Screws套挂螺栓及螺丝 Toggle Bolts钛合金膨胀螺丝Titanium Alloy Expansion Bolts六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽 Round Nuts四角螺帽 Square Nuts管用螺帽 Pipe Nuts轮壳螺帽 Wheel Nuts蝶型螺帽 Wing NutsU形螺帽 U NutsT形螺帽 T Nuts环首螺帽 Eye Nuts齿形螺帽 Kep Nuts齿花螺帽 Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽 Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽 Structural Nuts不锈钢螺帽 Stainless Steel Nuts铜螺帽 Brass Nuts铝螺帽 Aluminum Nuts合金钢螺帽 Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts 壁虎螺帽 Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽 Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽 Self-Locking Nuts制止螺帽 Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽 Special Nuts弹簧螺帽 Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts锌压属螺帽Zinc Die Casting Nuts普通六角螺帽 Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut合金钢线材盘元Alloy Steel Wire Rod球状化线材Annealing Wire And Rod黑铁丝 Black Wire黄铜棒线Brass Wire And Rod磨光棒钢Bright Steel Bar(Hex/Round/Square)铜合金线 Copper Alloy Wire线切割线 E.D.M Cutting Wire快削钢线材盘元Free Cutting Steel Wire Rod线材Iron Or Steel Wire线材盘元Iron Or Steel Wire Rod洋白铜线Nickel Silver Wire磷青铜线Phosphate Bronze Wire不锈钢条棒 Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材Stainless Steel Cold Heading Wire不锈钢线(抽线后) Stainless Steel Draw Wire不锈钢线材 Stainless Steel Wire不锈钢线材及盘元Stainless Steel Wire And Rod棒钢 Steel Bar(Hex/Round/Square)转回90度碾线头机 90讧evolving Wire Twisting Machine气动拉钉机 Air Riveter各式螺丝类产品自动包装Automatic Packaging For All Kinds Of Packaging 自动包装机Automatic Packing Machine螺丝制造搓牙机械Automatic Thread Rolling Machine螺丝割尾加工机械Automatic Thread Slotting Machine螺丝制造成型机械 Automatic Trimming Machine拉钉打头机Blind Rivet Heading Machine螺丝、螺帽成型机Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉Bolt Nut And Screws Heat Treatment Furnaces球状化电器炖炉Carburizing Furnace Vacuum And Bell Type Furnace超防锈复合瓷膜 Ceramic Coating连续式光辉渗碳淬火炉Continuous Bright Carburizing Quenching Furnace连续式光辉调质淬火炉Continuous Bright Hardening Quenching Furnace中、高热镀锌光辉连续炉 Continuous Bright Heat Treat Furnace连续式光辉热处理炉Continuous Type Bright Heat Treatment Furnace螺丝割尾及特殊割遘加工Machine Screw Shank Slotting螺丝钻孔加工Screw Shank Drilling鸡眼上下模 Eyelets Dies一般线材、盘元、退火炉 General Wire,Wire Rod,Annealing Furnace倒立式滑落型伸线机Handstand Type Wire Drawing Machine十字冲模Header Punches In Various Drives成型冲模Header Punches In Various Drives螺丝打头机 Heading Machine螺丝制造高速搓牙机械High Speed Automatic Thread Rolling Machine高中低周波感应加热炉 High,Medium,Low Frequency Induction Heater空心打头机Hollow Heading Machine热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts机械镀锌 Mechanical Galvanized迷你成型机 Mini-Formers成品自动收线机 Non-Stop Coiler精抽自动收线机 Non-Stop Coiler(Skinpass)螺帽模Nut Forming Dies螺帽成型模 Nuts Formers特殊零件成型机 Parts Forming Maching冲模 Punch Dies冲子 Punch Pins罗拉成型机 Rollers Formers机(踏)车用螺丝成型机Screw For Motorcycle Or Bicycle Heading Machine止付螺丝成型机Set Screws Formers套高成型机 Sockets Formers一般线材、盘元、螺丝合金炖炉Spheroidizing Bright Annealing Furnace球状化热处理炉Spheroidizing Heat Treatment Furnace攻牙机 Tapping Machine螺丝攻、车刀、模具 Taps Dies And Tools搓牙机铁屑分离装置Thread Chip Separator滚牙轮Thread Rolling Dies牙板Thread Rolling Dies Plates精密油压滚牙机Hydraulic Thread Rolling Machines模具 Tools六角整头模 Trimming Dies Hexagan碳化钨模具Tungsten Carbide Die镀钛处理(Tin)专业加工服务Tin Hard Coating For Cutting Tools And Punch By Pvd电镀化学原料 Various Electroplating Chemicals环规校正Calibration For Ring Gage环规、牙规、三线规校正 Calibration For Ring Gage, Athread Gage, 3 Wire Gage螺丝、螺帽品检量测仪器Fasteners Inspection And Measurement Instruments 螺丝、螺帽成型攻牙专用油 Forming And Tapping Oils For Bolts And Nuts Formers螺丝、螺帽五金等检验Insptection Services For Fasteners And Hardware德国schatz扭力机代理Representative Of Schatz Torque MachinIso品质保证系统 Iso Quality Assurance System生产管理系统 Production Control System物料管理系统Material Control System齿轮 Gears不锈钢牙条棒Stainless Steel Hread Rod马达轴承轴心组件 Bearing Shaft(Motor)轴承轴心 Bearing Shaft开口铆钉 Blind Rivets长形拉帽Blind Rivet Nuts拉帽 Blind Nuts拉钉 Blind Rivets实心梢Clevis Pins And Straight Pins弹片 Clips卷钉 Coil Nails冷锻零件Cold Forming Part开口销 Cotter PinsE型环 E-Rings膨胀螺栓 Expansion Anchor Bolts鸡眼钉 Eyelets RivetsR型销 Snap Pins闸、锁Latches And Keeper Assembleds其它特殊铆钉Other Specil Rivets销 Pins格式管夹、管束 Pipe Hanger铆钉 Rivets螺旋锔及螺旋圈Screw Hook And Screw Rings中空钉 Semi-Tubular Rivet开叉钉 Split Drive Anchors弹簧华司 Spring Washers弹簧蝴蝶夹 Spring Wings不锈钢华司 Stainlesssteel Washers钢铁钉Steel And Iron Nails搓牙铁钉 Thread Nails钛合金铆钉 Titaium Alloy Rivets管形铆钉 Tubular Rivets华司 Washers真空热处理 Vacuum Heat Treatment螺丝、螺帽、五金、Diy扣件 Fasteners合金钢工具 Alloy Steel Tools螺栓模 Bolt Heading Dies手动拉钉钳 Hand Riveter船舶链 Anchor Chain脚踏车链锁Bicycle Chain Locks螺丝起子 Bit罗拉 Chain Roller特殊铆合扣件Collars(A Blindfastener For Huck Intl)装饰链 Decorative Chains自攻螺纹衬套 Ensat Threaded Inserts六角扳手 Hexagon Keys超音螺纹压入式螺纹自动锁扣 Threaded Inserts For Plastic Injection Mouldeings汽车特殊杆接件Special Auto-Mobile Fastener As Your Needs螺纹护套 Recoil Inserts链条用滚子Roller For Roller Chain金属板镶嵌组件及自动夹扣组件Sheet Metal Fasteners工具套筒组件Socket Wrench Sets不锈钢链Stainless Steel Chains轭子 T-Yoke轮胎链 Tire Chains狗链 Dog Chains喇叭头轭铁U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道Stainless Wheel's Rack For Transporter工业用链Industrial Steel Link Chains拖链安全链Tow Chains And Safety Chains机车离合器零件Manufacture Of Motorcycle's Cvt Parts牙条棒 Thread Rod。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
铆钉种类
Open End Blind Rivet 开口型抽芯铆钉
Closed End Blind Rivet 封闭型抽芯铆钉
Multi-grip Rivet 双鼓型抽芯铆钉
Peel Type Blind Rivet 拉花型抽芯铆钉
Drive Rivet 击芯铆钉
Grooved Type Blind Rivet 沟槽型抽芯铆钉
Ring-Grooved Lockbolt 环槽铆钉
Maolock 拉丝铆钉
Insert Nut 铆螺母
Plastic Rivets 塑料铆钉
Open Type Blind Rivets 开口型抽芯铆钉
Alu/Steel Standard 铝/钢标准型
Alu/Steel Countersunk 铝/钢沉头型
Alu/Steel Large Flange 铝/钢大帽型
Alu/Stainless Steel Standard 铝/不锈钢标准型
Alu/Stainless Steel Countersunk 铝/不锈钢沉头型
Alu/Stainless Steel Large Flange 铝/不锈钢大帽型
Alu/Alu Standard 铝/铝标准型
Alu/Alu Countersunk 铝/铝沉头型
Alu/Alu Large Flange 铝/铝大帽型
Copper/Steel Standard 铜/钢标准型
Copper/Steel Countersunk 铜/钢沉头型
Copper/Stainless Steel Standard 铜/不锈钢标准型
Copper/Stainless Steel Countersunk 铜/不锈钢沉头型
Steel/Steel Standard 钢/钢标准型
Steel/Steel Countersunk 钢/钢沉头型
Steel/Steel Large Flange 钢/钢大帽型
Stainless Steel/Steel Standard 不锈钢/钢标准型
Stainless Steel/Steel Countersunk 不锈钢/钢沉头型
Stainless Steel/Stainless Steel Standard 不锈钢/不锈钢标准型Stainless Steel/Stainless Steel Countersunk 不锈钢/不锈钢沉头型
Seald Type Blind Rivets 封闭型抽芯铆钉
Alu/Steel Standard 铝/钢标准型
Alu/Steel Countersunk 铝/钢沉头型
Alu/Stainless Steel Standard 铝/不锈钢标准型
Alu/Stainless Steel Countersunk 铝/不锈钢沉头型
Alu/Alu Standard 铝/铝标准型
Alu/Alu Countersunk 铝/铝沉头型
Copper/Steel Standard 铜/钢标准型
Copper/Stainless Steel Standard 铜/不锈钢标准型
Steel/Steel Standard 钢/钢标准型
Stainless Steel/Stainless Steel Standard 不锈钢/不锈钢标准型
Multigrip Type Blind Rivets 双鼓型抽芯铆钉
Alu/Steel Standard 铝/钢标准型
Alu/Steel Large Flange 铝/钢大帽型
Alu/Stainless Steel Standard 铝/不锈钢标准型
Alu/Stainless Steel Large Flange 铝/不锈钢大帽型
Steel/Steel Standard 钢/钢标准型
Steel/Steel Large Flange 钢/钢大帽型
Stainless Steel/Stainless Steel Standard 不锈钢/不锈钢标准型Stainless Steel/Stainless Steel Large Flange 不锈钢/不锈钢大帽型
Anlock Type Blind Rivets 拉丝型抽芯铆钉
Alu/Steel Dome Head 铝/钢圆头型
Alu/Steel Countersunk 铝/钢沉头型
Alu/Alu Dome Head 铝/铝圆头型
Alu/Alu Countersunk 铝/铝沉头型
Steel/Steel Flat Head 铜/钢圆头型
Steel/Steel Countersunk 钢/钢沉头型
Stainless Stee/Stainless Stee Dome Head 不锈钢/不锈钢圆头型
Fold Type Blind Rivets 抽折式抽芯铆钉
Alu/Steel Dome Head 铝/钢圆头型
Alu/Alu Dome Head 铝/铝圆头型
Steel/Steel Dome Head 钢/钢沉头型
Stainless Steel/Steel Dome Head 不锈钢/钢圆头型
Stainless Steel/Stainless Steel Dome Head 不锈钢/不锈钢圆头型
Peel Type Blind Rivets 拉花型抽芯铆钉
Steel/Steel Standard 钢/钢标准型
Grooved Type Blind Rivets 沟槽型抽芯铆钉
Alu/Steel Standard 铝/钢标准型
Drive Rivets 击芯铆钉
Alu/Steel Standard 铝/钢标准型
Alu/Steel Large Flange 铝/钢大帽型
Steel/Steel Standard 钢/钢标准型
Steel/Steel Large Flange 钢/钢大帽型Ring-Grooved Lockbolt 环槽型抽芯铆钉
Alu Standard 铝标准型
Alu Countersunk 铝沉头型
Steel Standard 钢标准型
Steel Countersunk 钢沉头型
Stainless Steel Standard 不锈钢标准型Stainless Steel Countersunk 不锈钢沉头型
Blind Rivet Nuts 抽芯铆螺母
Alu Standard 铝标准型
Alu Countersunk 铝沉头型
Alu Small Head 铝小头型
Steel Standard 钢标准型
Steel Countersunk 钢沉头型
Steel Small Head 钢小头型
Stainless Steel Dome Head 不锈钢圆头型Stainless Steel Countersunk 不锈钢沉头型Stainless Steel Small Head 不锈钢小头型
raised-head rivet 凸头铆钉
blind rivet 盲铆钉空心铆钉
Pulling Rivet拉铆钉
Countersunk rivet 埋头铆钉沉头铆钉
Riveting Tool Rivets 铆接工具。