ASTM-A192-高压用碳素钢无缝锅炉管中文版
ASTM美国材料标准中文版
ASTM美国材料标准中文版ASTM A488/A488-2007 钢铸件焊接工艺和人员资格评定的标准实施规程( Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel )ASTMA 802/A 802M-1995(R2006重新审批) 视觉检测铸钢表面验收标准规程 (STANDARPDR ACTICEFOR STEEL CASTINGS, SURFACE ACCEPTANCE STANDARDS, VISUAL EXAM)INATIONASTM B108-2006 铝合金永久型铸件标准规范( STANDARD SPECIFICATION FOR ALUMINUM-ALLOY PERMANENT MOLD CAST)INGSASTM B179-2006 铸造用铝合金原锭及熔融锭在各铸造过程的标准技术规范( STANDARD SPECIFICATION FOR ALUMINUM ALLOYS IN INGOT AND MOLTEN FORMS FOR CASTINGS FROM ALL CASTING PROCESS)ESASTM B26/B26M-2005铝合金砂铸件标准规范( STANDARD SPECIFICATION FOR ALUMINUM-ALLOY SAND CASTING)SASTM D256-2006 测定塑料抗悬臂梁摆锤冲击性的标准试验方法( STANDARD TEST METHODS FOR DETERMINING THE IZOD PENDULUM IMPACT RESISTANCE OF PL)ASTICSASTM D2794-1993(R2004) 有机涂层抗快速形变(冲击)作用的标准试验方法( STANDARD TEST METHOFDO RR ESISTANCOE FO RGANI C OATINGTSO T HEE FFECTSO FR APIDD EFORMATIO(INM PACT) )ASTM D3359-2008 胶带试验用测定粘合性的标准试验方法( STANDARD TEST METHODS FOR MEASURING ADHESION BY TAPE T)ESTASTM D3363-2005 铅笔试验法测定涂膜硬度的标准试验方法( STANDARD TEST METHOD FOR FILM HARDNESS BY PENCIL TE)STASTMD 4060-2007 用泰伯尔磨蚀机测定有机涂层耐磨性的标准试验方法 ( STANDARTDE STM ETHODFOR ABRASION RESISTANCE OF ORGANIC COATINGS BY THE TABER A)BRASERASTM D4674-2002A暴露在室内办公室环境下的塑料颜色稳定性加速试验的标准实施规范(STANDARTDE STM ETHOFDO RA CCELERATETDE STINGF ORC OLORS TABILITY OF PLASTICSE XPOSED TO INDOOR OFFICE ENVIRONME)NTSASTM D4752-2003 用溶剂擦试法测定硅酸乙酯( 无机)富锌底漆耐甲乙酮的标准试验方法(STANDARD TEST METHOD FOR MEASURING MEK RESISTANCE OF ETHYL SILICATE (INORGANIC) ZINC-RICH PRIMERS BY SOLVENT R)UBASTMD 4828-1994E1(R2003) 有机覆层实际可洗性的标准试验方法( STANDARTDE STM ETHODFSO R PRACTICAL WASHABILITY OF ORGANIC COAT)INGSASTMD 638-2003 塑料拉伸性能标准测试方法 (STANDARTDE STM ETHOFDO RT ENSILEP ROPERTIESOF PLASTICS)ASTM E1316-2007 无损检测标准术语( STANDARD TERMINOLOGY FOR NONDESTRUCTIVE EXAMINATION)SASTM E1444-2005 磁粉检测标准规程( STANDARD PRACTICE FOR MAGNETIC PARTICLE TE)STING ASTM E155-2005 铝、镁铸件检验用标准参考射线底片( STANDARD REFERENCE RADIOGRAPHS FOR INSPECTION OF ALUMINUM AND MAGNESIUM CAS)TINGSASTME 165-2002 液体渗透剂检查标准测试方法( STANDARTDE STM ETHOFDO RL IQUID PENETRANT EXAMINATIO)NASTM E165-2002 液体渗透检查的标准试验方法王倩译( STANDARD TEST METHOD FOR LIQUID PENETRANT EXAMINAT)IONASTME 192-2004 航天设备蜡模钢铸件的参考放射线照相( STANDARRDE FERENCREA DIOGRAPHOSF INVESTMENT STEEL CASTINGS FOR AEROSPACE APPLIC)ATIONSASTM E242-2001(2005年重新批准) 在某些参数变化时射线图像外观用标准参考射线底片(STANDARD REFERENCE RADIOGRAPHS FOR APPEARANCES OF RADIOGRAPHIC IMAGES AS CER PARAMETERS ARE CHAN)GEDASTM E385-2007 使用14 兆电子伏特的中子活化和直接计数技术测定含氧量的试验方法(STANDARD TEST METHOD FOR OXYGEN CONTENT USING A 14-MEV NEUTRON ACTIVATION AND DIRECT-COUNTING TECHNIQ)UEASTM E426-1998(2007重新审批) 无缝及焊接管产品、沃斯田不锈钢及类似合金的电磁(涡电流)检测操作规程( Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys )ASTM E446-98(2004 年重新批准) 用于厚度在2in(51mm)以下钢铸件的标准参考射线底片(STANDARD REFERENCE RADIOGRAPHS FOR STEEL CASTINGS UP TO 2 IN. (51 MM) IN THICKNESS (ALSO SEE ASTM E 446 ADJUNCT SET, ASTM E 446 ADJUNCT V1, ASTM E 446 ADJUNCT V2. AND ASTM E 446 ADJUNCT V3))ASTME 466-2007 金属材料上进行的恒定振幅轴向疲劳试验 (STANDARPDR ACTICEF ORC ONDUCTING FORCE CONTROLLED CONSTANT AMPLITUDE AXIAL FATIGUE TESTS OF METALLICMA)TERIALSASTM F2357-2004 使用NORMA工N具"RCA"磨擦器测定薄膜开关上墨水和涂层抗磨性的标准试验方法( STANDARTDE STM ETHOFDO RD ETERMININTGH EA BRASIONR ESISTANCOE FI NKS ANDC OATINGS ON MEMBRANE SWITCHES USING THE NORMAN TOOL "RCA" A)BRADERASTM G154-2006 非金属材料暴露用荧光灯紫外暴露装置的操作规范标准( STANDARD PRACTICEFOR OPERATING FLUORESCENT LIGHT APPARATUS FOR UVEXPOSURE OF NONMETALLI)C MATERIA ISO,ASME,ASTM,DIN, JIS 国外管道法兰用密封垫片标准汇编ASTM F36-1995 测定垫片材料压缩率及回弹率的标准试验方法ASTM F37-1995 垫片材料密封性的标准试验方法ASTM F38-1995 垫片材料的蠕变松弛的标准试验方法ASTM F112-1995 包覆垫片密封性能的标准试验方法ASTM F146-1995A 垫片材料耐液体标准试验方法ASTM F363-1989（1994年重新确认）垫片腐蚀试验的标准方法ASTM F336-1992 用于腐蚀工况的非金属包覆垫片的设计与结构用标准方法ASTM F586-1979（1989年重新确认）测定垫片汇漏（泄漏率与应力y和系数m的关系）的标准试验方法ASTM A6/A6M-2004 a版结构用轧制钢板、型钢、板桩和棒钢通用要求ASTM A27/A27M-2005版一般用途碳钢铸件标准技术条件ASTM A29/A29M-2005版热锻碳素钢和合金钢棒材一般要求标准规范ASTM A36/A36M-2005版碳结构钢标准规范ASTM A36/A36M-2004碳结构钢标准规范ASTM A48/A48M-2003版灰铸铁铸件标准技术条件ASTM A53/A53M-2005版无镀层及热浸镀锌焊接与无缝公称钢管标准技术条件ASTM A105/A105M-2005版管道部件用碳钢锻件ASTM A106-2006版高温用无缝碳钢公称管规范ASTM A108-2003版冷精整的碳钢和合金钢棒材标准技术条件ASTM A123/A123M-2002版钢铁产品镀锌品层（热浸镀）标准规范ASTM A126-2004版阀门、法兰和管道附件用灰铁铸件ASTM A143-2003版热浸镀锌结构钢制品防脆化的标准实施规程和催化探测方法ASTM A153/A153M-2005版钢铁构件镀锌层（热浸镀）标准规范ASTM A179/A179M-1990（a R2001）版热交换器和冷凝器用无缝冷拉低碳钢管标准规范ASTM A192-2002版高压设备用无缝碳钢锅炉管标准规范ASTM A193/A193M-2006版高温用合金钢和不锈钢螺栓材料ASTM A194/A194M-2006版高温或高压或高温高压螺栓用碳钢及合金钢螺母标准规范ASTM A209/A209M-2003版锅炉和过热器用无缝碳钼合金钢管标准规范ASTM A210/A210M-2002版无缝中碳钢锅炉管和过热器管标准规范ASTMA 213/A213Mb-2004版无缝铁素体和奥氏体合金钢锅炉管、过热器管和换热器管标准规范ASTM A216/A216M-2004版高温用可熔焊碳钢铸件标准规范ASTM A234/A234M-2004版中、高温用锻制碳钢和合金钢管道配件ASTM A240/A240M-2005版压力容器用耐热铬及铬－镍不锈钢钢板、薄板和钢带标准技术条件ASTM A250/A250M-2004版锅炉和过热器用电阻焊铁素体碳合金钢管子标准技术条件ASTM A252-98（R2002）版焊接钢和无缝钢管桩的标准规范ASTM A262-2002a版探测奥氏体不锈钢晶间腐蚀敏感度的标准实施规范ASTM A269/A269-2004版通用无缝和焊接奥氏体不锈钢管标准规范ASTM A276-2006版不锈钢棒材和型材标准规范ASTM A283/A283M-2003版中、低抗拉强度碳素钢板标准技术条件ASTM A285/A285M-2003版压力容器用中、低抗拉强度碳素钢标准技术条件ASTM A307/A307M-2004版抗拉强度6000PSI 碳钢螺栓和螺柱标准技术条件ASTM A312/A312M-2005版无缝和焊接的以及重度冷加工奥氏体不锈钢公称管标准技术条件ASTM A320/A320M-2005版低温用合金钢栓接材料标准规范ASTM A333/A333M-2004版低温设备用无缝和焊接钢管的规范标准ASTM A334/A334M-2004版低温设备用无缝和焊接碳素和合金钢管的标准规范ASTM A335-2003版高温设备用无缝铁素体合金钢管标准规范ASTM A336/A336M-2005版高温承压件合金钢锻件标准技术条件ASTM A350/A350M-2004a版需切口韧性试验的管道部件用碳钢和低合金钢锻件标准规范ASTM A351/A351M-2006版承压件用奥氏体铸钢件标准规范ASTM A352/A352M-2006版低温承压用铁素体和马氏体铸钢件标准规范ASTM A356/A356M-2005版汽轮机用厚壁碳钢、低合金钢和不锈钢铸件标准技术条件ASTM A370-2005版钢制品力学性能试验方法和定义标准ASTM A387/A387M-2003版压力容器用铬钼合金钢板的标准规范ASTM A403/A403M-2004版锻制奥氏体不锈钢管配件的标准规范ASTM A450/A450M-2004版碳素钢管、铁素体合金钢管及奥氏体合金钢管一般要求的标准规范ASTM A479/A479M-2005版锅炉和其他压力容器用不锈钢棒材和型材标准技术条件ASTM A484/A484M-2005版不锈钢棒材、钢坯及锻件通用要求标准技术条件ASTM A500-2003a版圆形与异型冷成型焊接与无缝碳素钢结构管标准规范ASTM A515-2003版中温及高温压力容器用碳素钢板的标准规范ASTM A516-2004a版中温及低温压力容器用碳素钢板的标准规范ASTM A519-2003版机械工程用碳素钢和铝合金钢无缝钢管ASTM A530-2003版特种碳素钢和合金钢管一般要求的标准规范ASTM A577/A577M-90（R200）1 版钢板超声斜射波检验ASTM A589/A589M-2006版打水井用碳素钢无缝钢管和焊接钢管ASTM A609/A609M-199（1 82002）版碳钢、低合金钢和马氏体不锈钢铸件超声波检验ASTM A615/A615M-2004a版混凝土配筋用异形钢筋和无节钢胚棒标准规范ASTM A703/A703M-2004版标准技术条件—承压件钢铸件通用要求ASTM A751-2001版钢制品化学分析方法，实验操作和术语ASTM A781/A781M-2004a版铸件、钢和合金的标准规范及通用工业的一般性要求ASTM A788/A788M-2004a版标准技术条件—钢锻件通用要求ASTM A965/A965M-2002版高温承压件用奥氏体钢锻件标准规范ASTM B16/B16M-2005版螺纹切削机用易车削黄铜棒、条和型材标准规范ASTM B62/B62M-2002版青铜或高铜黄铜铸件标准规范ASTM B209-2004版铝和铝合金薄板和中厚板标准规范ASTM B462-2004版高温耐腐蚀用锻制或轧制的UNS NO603、0 UNS NO602、2 UNS NO620、0 UNS NO8020、UNS NO802、4 UNS NO802、6 UNS NO836、7 UNS NO1027、6 UNS N10665、UNS N10675和UNS R20033合金管法兰、锻制管件、阀门和零件标准规范ASTM B564-2004版镍合金锻件标准规范ASTM E6-2003版关于力学性能试验方法的标准术语ASTM E10-2001版金属材料布氏硬度的标准试验方法ASTM E18-2003版金属材料洛氏硬度和洛氏表面硬度的标准测试方法ASTM E29-2002版使用有效数字确定试验数据与规范符合性作法ASTM E8M-2004版金属材料拉伸试验的标准测试方法ASTM E94-2004版放射性检查的标准指南ASTM E125-1963（R2003）版铁铸件的磁粉检验用标准参考照片ASTM E164-2003版焊件的超声接触检验的标准操作规程ASTM E208-1995a(R2000)版用导向落锤试验测定铁素体钢无塑性转变温度的标准试验方法ASTM E213-2004版金属管超声检验方法ASTM E273-2001版焊接公称管和管子制品超声波检验用标准实用规程ASTM E709-2001版磁粉试验的推荐试验方法ASTM F36-1999(R2003)版测定垫片材料压缩率及回弹率的标准试验方法ASTM F37-2000版垫片材料密封性的标准试验方法ASTM F38-2000版垫片材料的蠕变松弛的标准试验方法ASTM F112-2000版包复垫片密封性能的标准试验方法ASTM F146-2004版垫片材料耐液体标准试验方法ASTM F1311-1990(R2001)版大口径组装式碳钢法兰标准规范ASTM G1-2003版腐蚀试样的制备、清洁处理和评定用标准实施规范ASTM G36-73(R1981) 参考资料标准实用规程：在沸的氯化镁溶液中进行的应力腐蚀裂纹试验ASTM G46-1976(R1986) 参考资料标准实用规程：麻点腐蚀的检验和评定ASTMG 48-2003 版使用三氯化铁溶液做不锈钢及其合金的耐麻点腐蚀和抗裂口腐蚀性试验的标准方法ASTM标准中译本丛书(一) 碳钢、铸铁、不锈钢及合金钢材料标准规范(含18个标准)1.ASTM A105/A105M-2002 版管道部件用碳钢锻件2.ASTM A126-1995(R2001)版阀门、法兰和管道附件用灰铁铸件3.ASTM A181/A181M-2001 版通用管路用碳钢锻件标准规范4.ASTM A193/A193M-2001 版高温用合金钢和不锈钢螺栓材料5.ASTM A194/A194M-2001a版高温、高压或高温高压螺栓用碳钢及合金钢螺母标准规范6.ASTM A216/A216M-2001a版高温用可熔焊碳钢铸件标准规范7.ASTM A217/A217M-2002 版高温承压件用马氏体不锈钢和合金钢铸件标准规范8.ASTM A276-2002a 版不锈钢棒材和型材9.ASTM A278/A278M-2001 版高温不超过650°F(350℃)的承压部件用灰铸铁件10.ASTM A320/A320M-2002 版低温用合金钢栓接材料11.ASTM A350/A350M-2002 版要求冲击韧性试验的管件用碳钢及低合金钢锻件标准规范12.ASTM A351/A351M-2000 版承压件用奥氏体、奥氏体- 铁素体(双相)钢铸件规范13.ASTM A352/A352M-1993(R1998)版低温承压件用铁素体和马氏体钢铸件标准规范14.ASTM A395/A395M-1999 版高温用铁素体球墨铸铁承压铸件15.ASTM A439-1983(R1999) 版奥氏体球墨铸铁件16.ASTM A536-1984(R1999) 版球墨铸铁件17.ASTM A694/A694M-2000 版高温输送用管法兰、管件、阀门及零件用碳钢和合金钢锻件标准规范18.ASTM A965/A965M-2002 版高温高压部件用奥氏体钢锻件ASTM标准中译本丛书(二) 法兰、管件、阀门及部件(含9 个标准)1.ASTM A182/A182M-2002版高温用锻制或轧制合金钢法兰、锻制管件、阀门和部件2.ASTM A961-2002 版管道用钢制法兰、锻制管件、阀门和零件的通用要求标准规范3.ASTMB 462-2002 版高温耐腐蚀用锻制或轧制的UNSN O6030、UNSN O6022、UNSN O6200、UNS NO8020、UNS NO802、4 UNS NO802、6 UNS NO836、7 UNS NO1027、6 UNS N10665、UNS N10675和UNS R20033合金管法兰、锻制管件、阀门和零件标准规范4.ASTM F885-1984(R2002)版公称管径为NPS 1/4～2的青铜截止阀外形尺寸标准规范5.ASTM F992-1986(R2001) 版阀门铭牌标准规范6.ASTM F993-1986(R2001) 版阀门锁紧装置标准规范7.ASTM F1030-1986(R1998) 版阀门操作装置的选择准则8.ASTM F1098-1987(R1998) 版公称管径有NPS2～24 的蝶阀外形尺寸标准规范9.ASTM F1565-2000 版蒸汽用减压阀规范。
ASTM美国材料标准中文版
ASTM美国材料标准中文版ASTM A488/A488-2007 钢铸件焊接工艺和人员资格评定的标准实施规程（Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel）ASTM A802/A 802M-1995(R2006重新审批) 视觉检测铸钢表面验收标准规程（STANDARD PRACTICE FOR STEEL CASTINGS, SURFACE ACCEPTANCE STANDARDS, VISUAL EXAMINATION）ASTM B108-2006 铝合金永久型铸件标准规范（STANDARD SPECIFICATION FOR ALUMINUM-ALLOY PERMANENT MOLD CASTINGS）ASTM B179-2006 铸造用铝合金原锭及熔融锭在各铸造过程的标准技术规范（STANDARD SPECIFICATION FOR ALUMINUM ALLOYS IN INGOT AND MOLTEN FORMS FOR CASTINGS FROM ALL CASTING PROCESSES）ASTM B26/B26M-2005 铝合金砂铸件标准规范（STANDARD SPECIFICATION FOR ALUMINUM-ALLOY SAND CASTINGS）ASTM D256-2006 测定塑料抗悬臂梁摆锤冲击性的标准试验方法（STANDARD TEST METHODS FOR DETERMINING THE IZOD PENDULUM IMPACT RESISTANCE OF PLASTICS）ASTM D2794-1993(R2004) 有机涂层抗快速形变(冲击)作用的标准试验方法（STANDARD TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT) ）ASTM D3359-2008 胶带试验用测定粘合性的标准试验方法（STANDARD TEST METHODS FOR MEASURING ADHESION BY TAPE TEST）ASTM D3363-2005 铅笔试验法测定涂膜硬度的标准试验方法（STANDARD TEST METHOD FOR FILM HARDNESS BY PENCIL TEST）ASTM D4060-2007 用泰伯尔磨蚀机测定有机涂层耐磨性的标准试验方法（STANDARD TEST METHOD FOR ABRASION RESISTANCE OF ORGANIC COATINGS BY THE TABER ABRASER）ASTM D4674-2002A 暴露在室内办公室环境下的塑料颜色稳定性加速试验的标准实施规范（STANDARD TEST METHOD FOR ACCELERATED TESTING FOR COLOR STABILITY OF PLASTICS EXPOSED TO INDOOR OFFICE ENVIRONMENTS）ASTM D4752-2003 用溶剂擦试法测定硅酸乙酯(无机)富锌底漆耐甲乙酮的标准试验方法（STANDARD TEST METHOD FOR MEASURING MEK RESISTANCE OF ETHYL SILICATE (INORGANIC) ZINC-RICH PRIMERS BY SOLVENT RUB）ASTM D4828-1994E1(R2003) 有机覆层实际可洗性的标准试验方法（STANDARD TEST METHODS FOR PRACTICAL WASHABILITY OF ORGANIC COATINGS）ASTM D638-2003 塑料拉伸性能标准测试方法（STANDARD TEST METHOD FOR TENSILE PROPERTIES OF PLASTICS）ASTM E1316-2007 无损检测标准术语（STANDARD TERMINOLOGY FOR NONDESTRUCTIVE EXAMINATIONS）ASTM E1444-2005 磁粉检测标准规程（STANDARD PRACTICE FOR MAGNETIC PARTICLE TESTING）ASTM E155-2005 铝、镁铸件检验用标准参考射线底片（STANDARD REFERENCE RADIOGRAPHS FOR INSPECTION OF ALUMINUM AND MAGNESIUM CASTINGS）ASTM E165-2002 液体渗透剂检查标准测试方法（STANDARD TEST METHOD FOR LIQUID PENETRANT EXAMINATION）ASTM E165-2002 液体渗透检查的标准试验方法王倩译（STANDARD TEST METHOD FOR LIQUID PENETRANT EXAMINATION）ASTM E192-2004 航天设备蜡模钢铸件的参考放射线照相（STANDARD REFERENCE RADIOGRAPHS OF INVESTMENT STEEL CASTINGS FOR AEROSPACE APPLICATIONS）ASTM E242-2001(2005年重新批准) 在某些参数变化时射线图像外观用标准参考射线底片（STANDARD REFERENCE RADIOGRAPHS FOR APPEARANCES OF RADIOGRAPHIC IMAGES AS CERTAIN PARAMETERS ARE CHANGED）ASTM E385-2007 使用14兆电子伏特的中子活化和直接计数技术测定含氧量的试验方法（STANDARD TEST METHOD FOR OXYGEN CONTENT USING A 14-MEV NEUTRON ACTIVATION AND DIRECT-COUNTING TECHNIQUE）ASTM E426-1998(2007重新审批) 无缝及焊接管产品、沃斯田不锈钢及类似合金的电磁（涡电流）检测操作规程（Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys）ASTM E446-98（2004年重新批准）用于厚度在2in(51mm)以下钢铸件的标准参考射线底片（STANDARD REFERENCE RADIOGRAPHS FOR STEEL CASTINGS UP TO 2 IN. (51 MM) IN THICKNESS (ALSO SEE ASTM E 446 ADJUNCT SET, ASTM E 446 ADJUNCT V1, ASTM E 446 ADJUNCT V2. AND ASTM E 446 ADJUNCT V3)）ASTM E466-2007 金属材料上进行的恒定振幅轴向疲劳试验（STANDARD PRACTICE FOR CONDUCTING FORCE CONTROLLED CONSTANT AMPLITUDE AXIAL FATIGUE TESTS OF METALLIC MATERIALS ）ASTM F2357-2004 使用NORMAN工具"RCA"磨擦器测定薄膜开关上墨水和涂层抗磨性的标准试验方法（STANDARD TEST METHOD FOR DETERMINING THE ABRASION RESISTANCE OF INKS AND COATINGS ON MEMBRANE SWITCHES USING THE NORMAN TOOL "RCA" ABRADER）ASTM G154-2006 非金属材料暴露用荧光灯紫外暴露装置的操作规范标准（STANDARD PRACTICE FOR OPERATING FLUORESCENT LIGHT APPARATUS FOR UVEXPOSURE OF NONMETALLIC MATERIALS）ISO,ASME,ASTM,DIN, JIS 国外管道法兰用密封垫片标准汇编ASTM F36-1995? 测定垫片材料压缩率及回弹率的标准试验方法ASTM F37-1995? 垫片材料密封性的标准试验方法ASTM F38-1995? 垫片材料的蠕变松弛的标准试验方法ASTM F112-1995? 包覆垫片密封性能的标准试验方法ASTM F146-1995A? 垫片材料耐液体标准试验方法ASTM F363-1989(1994年重新确认) 垫片腐蚀试验的标准方法ASTM F336-1992? 用于腐蚀工况的非金属包覆垫片的设计与结构用标准方法ASTM F586-1979(1989年重新确认) 测定垫片汇漏(泄漏率与应力y和系数m的关系)的标准试验方法ASTM A6/A6M-2004 a版结构用轧制钢板、型钢、板桩和棒钢通用要求ASTM A27/A27M-2005版一般用途碳钢铸件标准技术条件ASTM A29/A29M-2005版热锻碳素钢和合金钢棒材一般要求标准规范ASTM A36/A36M-2005版碳结构钢标准规范ASTM A36/A36M-2004 碳结构钢标准规范ASTM A48/A48M-2003版灰铸铁铸件标准技术条件ASTM A53/A53M-2005版无镀层及热浸镀锌焊接与无缝公称钢管标准技术条件ASTM A105/A105M-2005版管道部件用碳钢锻件ASTM A106-2006版高温用无缝碳钢公称管规范ASTM A108-2003版冷精整的碳钢和合金钢棒材标准技术条件ASTM A123/A123M-2002版钢铁产品镀锌品层(热浸镀)标准规范ASTM A126-2004版阀门、法兰和管道附件用灰铁铸件ASTM A143-2003版热浸镀锌结构钢制品防脆化的标准实施规程和催化探测方法ASTM A153/A153M-2005版钢铁构件镀锌层(热浸镀)标准规范ASTM A179/A179M-1990a（R2001）版热交换器和冷凝器用无缝冷拉低碳钢管标准规范ASTM A192-2002版高压设备用无缝碳钢锅炉管标准规范ASTM A193/A193M-2006版高温用合金钢和不锈钢螺栓材料ASTM A194/A194M-2006版高温或高压或高温高压螺栓用碳钢及合金钢螺母标准规范ASTM A209/A209M-2003版锅炉和过热器用无缝碳钼合金钢管标准规范ASTM A210/A210M-2002版无缝中碳钢锅炉管和过热器管标准规范ASTM A213/A213Mb-2004版无缝铁素体和奥氏体合金钢锅炉管、过热器管和换热器管标准规范ASTM A216/A216M-2004版高温用可熔焊碳钢铸件标准规范ASTM A234/A234M-2004版中、高温用锻制碳钢和合金钢管道配件ASTM A240/A240M-2005版压力容器用耐热铬及铬－镍不锈钢钢板、薄板和钢带标准技术条件ASTM A250/A250M-2004版锅炉和过热器用电阻焊铁素体碳合金钢管子标准技术条件ASTM A252-98（R2002）版焊接钢和无缝钢管桩的标准规范ASTM A262-2002a版探测奥氏体不锈钢晶间腐蚀敏感度的标准实施规范ASTM A269/A269-2004版通用无缝和焊接奥氏体不锈钢管标准规范ASTM A276-2006版不锈钢棒材和型材标准规范ASTM A283/A283M-2003版中、低抗拉强度碳素钢板标准技术条件ASTM A285/A285M-2003版压力容器用中、低抗拉强度碳素钢标准技术条件ASTM A307/A307M-2004版抗拉强度6000PSI碳钢螺栓和螺柱标准技术条件ASTM A312/A312M-2005版无缝和焊接的以及重度冷加工奥氏体不锈钢公称管标准技术条件ASTM A320/A320M-2005版低温用合金钢栓接材料标准规范ASTM A333/A333M-2004版低温设备用无缝和焊接钢管的规范标准ASTM A334/A334M-2004版低温设备用无缝和焊接碳素和合金钢管的标准规范ASTM A335-2003版高温设备用无缝铁素体合金钢管标准规范ASTM A336/A336M-2005版高温承压件合金钢锻件标准技术条件ASTM A350/A350M-2004a版需切口韧性试验的管道部件用碳钢和低合金钢锻件标准规范ASTM A351/A351M-2006版承压件用奥氏体铸钢件标准规范ASTM A352/A352M-2006版低温承压用铁素体和马氏体铸钢件标准规范ASTM A356/A356M-2005版汽轮机用厚壁碳钢、低合金钢和不锈钢铸件标准技术条件ASTM A370-2005版钢制品力学性能试验方法和定义标准ASTM A387/A387M-2003版压力容器用铬钼合金钢板的标准规范ASTM A403/A403M-2004版锻制奥氏体不锈钢管配件的标准规范ASTM A450/A450M-2004版碳素钢管、铁素体合金钢管及奥氏体合金钢管一般要求的标准规范ASTM A479/A479M-2005版锅炉和其他压力容器用不锈钢棒材和型材标准技术条件ASTM A484/A484M-2005版不锈钢棒材、钢坯及锻件通用要求标准技术条件ASTM A500-2003a版圆形与异型冷成型焊接与无缝碳素钢结构管标准规范ASTM A515-2003版中温及高温压力容器用碳素钢板的标准规范ASTM A516-2004a版中温及低温压力容器用碳素钢板的标准规范ASTM A519-2003版机械工程用碳素钢和铝合金钢无缝钢管ASTM A530-2003版特种碳素钢和合金钢管一般要求的标准规范ASTM A577/A577M-90(R2001）版钢板超声斜射波检验ASTM A589/A589M-2006版打水井用碳素钢无缝钢管和焊接钢管ASTM A609/A609M-1991（82002）版碳钢、低合金钢和马氏体不锈钢铸件超声波检验ASTM A615/A615M-2004a版混凝土配筋用异形钢筋和无节钢胚棒标准规范ASTM A703/A703M-2004版标准技术条件—承压件钢铸件通用要求ASTM A751-2001版钢制品化学分析方法，实验操作和术语ASTM A781/A781M-2004a版铸件、钢和合金的标准规范及通用工业的一般性要求ASTM A788/A788M-2004a版标准技术条件—钢锻件通用要求ASTM A965/A965M-2002版高温承压件用奥氏体钢锻件标准规范ASTM B16/B16M-2005版螺纹切削机用易车削黄铜棒、条和型材标准规范ASTM B62/B62M-2002版青铜或高铜黄铜铸件标准规范ASTM B209-2004版铝和铝合金薄板和中厚板标准规范ASTM B462-2004版高温耐腐蚀用锻制或轧制的UNS NO6030、UNS NO6022、UNS NO6200、UNS NO8020、UNS NO8024、UNS NO8026、UNS NO8367、UNS NO10276、UNS N10665、UNS N10675和UNS R20033合金管法兰、锻制管件、阀门和零件标准规范ASTM B564-2004版镍合金锻件标准规范ASTM E6-2003版关于力学性能试验方法的标准术语ASTM E10-2001版金属材料布氏硬度的标准试验方法ASTM E18-2003版金属材料洛氏硬度和洛氏表面硬度的标准测试方法ASTM E29-2002版使用有效数字确定试验数据与规范符合性作法ASTM E8M-2004版金属材料拉伸试验的标准测试方法ASTM E94-2004版放射性检查的标准指南ASTM E125-1963（R2003）版铁铸件的磁粉检验用标准参考照片ASTM E164-2003版焊件的超声接触检验的标准操作规程ASTM E208-1995a(R2000)版用导向落锤试验测定铁素体钢无塑性转变温度的标准试验方法ASTM E213-2004版金属管超声检验方法ASTM E273-2001版焊接公称管和管子制品超声波检验用标准实用规程ASTM E709-2001版磁粉试验的推荐试验方法ASTM F36-1999(R2003）版测定垫片材料压缩率及回弹率的标准试验方法ASTM F37-2000版垫片材料密封性的标准试验方法ASTM F38-2000版垫片材料的蠕变松弛的标准试验方法ASTM F112-2000版包复垫片密封性能的标准试验方法ASTM F146-2004版垫片材料耐液体标准试验方法ASTM F1311-1990(R2001)版大口径组装式碳钢法兰标准规范ASTM G1-2003版腐蚀试样的制备、清洁处理和评定用标准实施规范ASTM G36-73(R1981) 参考资料标准实用规程：在沸的氯化镁溶液中进行的应力腐蚀裂纹试验ASTM G46-1976(R1986) 参考资料标准实用规程：麻点腐蚀的检验和评定ASTM G48-2003版使用三氯化铁溶液做不锈钢及其合金的耐麻点腐蚀和抗裂口腐蚀性试验的标准方法ASTM标准中译本丛书（一）碳钢、铸铁、不锈钢及合金钢材料标准规范（含18个标准)1. ASTM A105/A105M-2002版管道部件用碳钢锻件2. ASTM A126-1995(R2001)版阀门、法兰和管道附件用灰铁铸件3. ASTM A181/A181M-2001 版通用管路用碳钢锻件标准规范4. ASTM A193/A193M-2001版 ?高温用合金钢和不锈钢螺栓材料5. ASTM A194/A194M-2001a版高温、高压或高温高压螺栓用碳钢及合金钢螺母标准规范6. ASTM A216/A216M-2001a版高温用可熔焊碳钢铸件标准规范7. ASTM A217/A217M-2002 版高温承压件用马氏体不锈钢和合金钢铸件标准规范8. ASTM A276-2002a版不锈钢棒材和型材9. ASTM A278/A278M-2001版高温不超过650°F（350℃）的承压部件用灰铸铁件10. ASTM A320/A320M-2002 版低温用合金钢栓接材料11. ASTM A350/A350M-2002 版要求冲击韧性试验的管件用碳钢及低合金钢锻件标准规范12. ASTM A351/A351M-2000 版承压件用奥氏体、奥氏体-铁素体（双相）钢铸件规范13. ASTM A352/A352M-1993(R1998)版低温承压件用铁素体和马氏体钢铸件标准规范14. ASTM A395/A395M-1999 版高温用铁素体球墨铸铁承压铸件15. ASTM A439-1983(R1999)版奥氏体球墨铸铁件16. ASTM A536-1984(R1999)版球墨铸铁件17. ASTM A694/A694M-2000? 版高温输送用管法兰、管件、阀门及零件用碳钢和合金钢锻件标准规范18. ASTM A965/A965M-2002 版高温高压部件用奥氏体钢锻件ASTM标准中译本丛书（二）法兰、管件、阀门及部件（含9个标准）1. ASTM A182/A182M-2002版高温用锻制或轧制合金钢法兰、锻制管件、阀门和部件2. ASTM A961-2002版管道用钢制法兰、锻制管件、阀门和零件的通用要求标准规范3. ASTM B462-2002版高温耐腐蚀用锻制或轧制的UNS NO6030、UNS NO6022、UNS NO6200、UNS NO8020、UNS NO8024、UNS NO8026、UNS NO8367、UNS NO10276、UNS N10665、UNS N10675和UNS R20033合金管法兰、锻制管件、阀门和零件标准规范4. ASTM F885-1984（R2002）版公称管径为NPS 1/4～2的青铜截止阀外形尺寸标准规范5. ASTM F992-1986(R2001)版阀门铭牌标准规范6. ASTM F993-1986(R2001)版阀门锁紧装置标准规范7. ASTM F1030-1986(R1998)版阀门操作装置的选择准则8. ASTM F1098-1987(R1998)版公称管径有NPS2～24的蝶阀外形尺寸标准规范9. ASTM F1565-2000版蒸汽用减压阀规范。
ASTM美国材料标准中文版
ASTM美国材料标准中文版ASTM A488/A488-2007 钢铸件焊接工艺和人员资格评定的标准实施规程（Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel）ASTM A802/A 802M-1995(R2006重新审批) 视觉检测铸钢表面验收标准规程（STANDARD PRACTICE FOR STEEL CASTINGS, SURFACE ACCEPTANCE STANDARDS, VISUAL EXAMINATION）ASTM B108-2006 铝合金永久型铸件标准规范（STANDARD SPECIFICATION FOR ALUMINUM-ALLOY PERMANENT MOLD CASTINGS）ASTM B179-2006 铸造用铝合金原锭及熔融锭在各铸造过程的标准技术规范（STANDARD SPECIFICATION FOR ALUMINUM ALLOYS IN INGOT AND MOLTEN FORMS FOR CASTINGS FROM ALL CASTING PROCESSES）ASTM B26/B26M-2005 铝合金砂铸件标准规范（STANDARD SPECIFICATION FOR ALUMINUM-ALLOY SAND CASTINGS）ASTM D256-2006 测定塑料抗悬臂梁摆锤冲击性的标准试验方法（STANDARD TEST METHODS FOR DETERMINING THE IZOD PENDULUM IMPACT RESISTANCE OF PLASTICS）ASTM D2794-1993(R2004) 有机涂层抗快速形变(冲击)作用的标准试验方法（STANDARD TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT) ）ASTM D3359-2008 胶带试验用测定粘合性的标准试验方法（STANDARD TEST METHODS FOR MEASURING ADHESION BY TAPE TEST）ASTM D3363-2005 铅笔试验法测定涂膜硬度的标准试验方法（STANDARD TEST METHOD FOR FILM HARDNESS BY PENCIL TEST）ASTM D4060-2007 用泰伯尔磨蚀机测定有机涂层耐磨性的标准试验方法（STANDARD TEST METHOD FOR ABRASION RESISTANCE OF ORGANIC COATINGS BY THE TABER ABRASER）ASTM D4674-2002A 暴露在室内办公室环境下的塑料颜色稳定性加速试验的标准实施规范（STANDARD TEST METHOD FOR ACCELERATED TESTING FOR COLOR STABILITY OF PLASTICS EXPOSED TO INDOOR OFFICE ENVIRONMENTS）ASTM D4752-2003 用溶剂擦试法测定硅酸乙酯(无机)富锌底漆耐甲乙酮的标准试验方法（STANDARD TEST METHOD FOR MEASURING MEK RESISTANCE OF ETHYL SILICATE (INORGANIC) ZINC-RICH PRIMERS BY SOLVENT RUB）ASTM D4828-1994E1(R2003) 有机覆层实际可洗性的标准试验方法（STANDARD TEST METHODS FOR PRACTICAL WASHABILITY OF ORGANIC COATINGS）ASTM D638-2003 塑料拉伸性能标准测试方法（STANDARD TEST METHOD FOR TENSILE PROPERTIES OF PLASTICS）ASTM E1316-2007 无损检测标准术语（STANDARD TERMINOLOGY FOR NONDESTRUCTIVE EXAMINATIONS）ASTM E1444-2005 磁粉检测标准规程（STANDARD PRACTICE FOR MAGNETIC PARTICLE TESTING）ASTM E155-2005 铝、镁铸件检验用标准参考射线底片（STANDARD REFERENCE RADIOGRAPHS FOR INSPECTION OF ALUMINUM AND MAGNESIUM CASTINGS）ASTM E165-2002 液体渗透剂检查标准测试方法（STANDARD TEST METHOD FOR LIQUID PENETRANT EXAMINATION）ASTM E165-2002 液体渗透检查的标准试验方法王倩译（STANDARD TEST METHOD FOR LIQUID PENETRANT EXAMINATION）ASTM E192-2004 航天设备蜡模钢铸件的参考放射线照相（STANDARD REFERENCE RADIOGRAPHS OF INVESTMENT STEEL CASTINGS FOR AEROSPACE APPLICATIONS）ASTM E242-2001(2005年重新批准) 在某些参数变化时射线图像外观用标准参考射线底片（STANDARD REFERENCE RADIOGRAPHS FOR APPEARANCES OF RADIOGRAPHIC IMAGES AS CERTAIN PARAMETERS ARE CHANGED）ASTM E385-2007 使用14兆电子伏特的中子活化和直接计数技术测定含氧量的试验方法（STANDARD TEST METHOD FOR OXYGEN CONTENT USING A 14-MEV NEUTRON ACTIVATION AND DIRECT-COUNTING TECHNIQUE）ASTM E426-1998(2007重新审批) 无缝及焊接管产品、沃斯田不锈钢及类似合金的电磁（涡电流）检测操作规程（Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys）ASTM E446-98（2004年重新批准）用于厚度在2in(51mm)以下钢铸件的标准参考射线底片（STANDARD REFERENCE RADIOGRAPHS FOR STEEL CASTINGS UP TO 2 IN. (51 MM) IN THICKNESS (ALSO SEE ASTM E 446 ADJUNCT SET, ASTM E 446 ADJUNCT V1, ASTM E 446 ADJUNCT V2. AND ASTM E 446 ADJUNCT V3)）ASTM E466-2007 金属材料上进行的恒定振幅轴向疲劳试验（STANDARD PRACTICE FOR CONDUCTING FORCE CONTROLLED CONSTANT AMPLITUDE AXIAL FATIGUE TESTS OF METALLIC MATERIALS ）ASTM F2357-2004 使用NORMAN工具"RCA"磨擦器测定薄膜开关上墨水和涂层抗磨性的标准试验方法（STANDARD TEST METHOD FOR DETERMINING THE ABRASION RESISTANCE OF INKS AND COATINGS ON MEMBRANE SWITCHES USING THE NORMAN TOOL "RCA" ABRADER）ASTM G154-2006 非金属材料暴露用荧光灯紫外暴露装置的操作规范标准（STANDARD PRACTICE FOR OPERATING FLUORESCENT LIGHT APPARATUS FOR UVEXPOSURE OF NONMETALLIC MATERIALS）ISO,ASME,ASTM,DIN, JIS 国外管道法兰用密封垫片标准汇编ASTM F36-1995? 测定垫片材料压缩率及回弹率的标准试验方法ASTM F37-1995? 垫片材料密封性的标准试验方法ASTM F38-1995? 垫片材料的蠕变松弛的标准试验方法ASTM F112-1995? 包覆垫片密封性能的标准试验方法ASTM F146-1995A? 垫片材料耐液体标准试验方法ASTM F363-1989(1994年重新确认) 垫片腐蚀试验的标准方法ASTM F336-1992? 用于腐蚀工况的非金属包覆垫片的设计与结构用标准方法ASTM F586-1979(1989年重新确认) 测定垫片汇漏(泄漏率与应力y和系数m的关系)的标准试验方法ASTM A6/A6M-2004 a版结构用轧制钢板、型钢、板桩和棒钢通用要求ASTM A27/A27M-2005版一般用途碳钢铸件标准技术条件ASTM A29/A29M-2005版热锻碳素钢和合金钢棒材一般要求标准规范ASTM A36/A36M-2005版碳结构钢标准规范ASTM A36/A36M-2004 碳结构钢标准规范ASTM A48/A48M-2003版灰铸铁铸件标准技术条件ASTM A53/A53M-2005版无镀层及热浸镀锌焊接与无缝公称钢管标准技术条件ASTM A105/A105M-2005版管道部件用碳钢锻件ASTM A106-2006版高温用无缝碳钢公称管规范ASTM A108-2003版冷精整的碳钢和合金钢棒材标准技术条件ASTM A123/A123M-2002版钢铁产品镀锌品层(热浸镀)标准规范ASTM A126-2004版阀门、法兰和管道附件用灰铁铸件ASTM A143-2003版热浸镀锌结构钢制品防脆化的标准实施规程和催化探测方法ASTM A153/A153M-2005版钢铁构件镀锌层(热浸镀)标准规范ASTM A179/A179M-1990a（R2001）版热交换器和冷凝器用无缝冷拉低碳钢管标准规范ASTM A192-2002版高压设备用无缝碳钢锅炉管标准规范ASTM A193/A193M-2006版高温用合金钢和不锈钢螺栓材料ASTM A194/A194M-2006版高温或高压或高温高压螺栓用碳钢及合金钢螺母标准规范ASTM A209/A209M-2003版锅炉和过热器用无缝碳钼合金钢管标准规范ASTM A210/A210M-2002版无缝中碳钢锅炉管和过热器管标准规范ASTM A213/A213Mb-2004版无缝铁素体和奥氏体合金钢锅炉管、过热器管和换热器管标准规范ASTM A216/A216M-2004版高温用可熔焊碳钢铸件标准规范ASTM A234/A234M-2004版中、高温用锻制碳钢和合金钢管道配件ASTM A240/A240M-2005版压力容器用耐热铬及铬－镍不锈钢钢板、薄板和钢带标准技术条件ASTM A250/A250M-2004版锅炉和过热器用电阻焊铁素体碳合金钢管子标准技术条件ASTM A252-98（R2002）版焊接钢和无缝钢管桩的标准规范ASTM A262-2002a版探测奥氏体不锈钢晶间腐蚀敏感度的标准实施规范ASTM A269/A269-2004版通用无缝和焊接奥氏体不锈钢管标准规范ASTM A276-2006版不锈钢棒材和型材标准规范ASTM A283/A283M-2003版中、低抗拉强度碳素钢板标准技术条件ASTM A285/A285M-2003版压力容器用中、低抗拉强度碳素钢标准技术条件ASTM A307/A307M-2004版抗拉强度6000PSI碳钢螺栓和螺柱标准技术条件ASTM A312/A312M-2005版无缝和焊接的以及重度冷加工奥氏体不锈钢公称管标准技术条件ASTM A320/A320M-2005版低温用合金钢栓接材料标准规范ASTM A333/A333M-2004版低温设备用无缝和焊接钢管的规范标准ASTM A334/A334M-2004版低温设备用无缝和焊接碳素和合金钢管的标准规范ASTM A335-2003版高温设备用无缝铁素体合金钢管标准规范ASTM A336/A336M-2005版高温承压件合金钢锻件标准技术条件ASTM A350/A350M-2004a版需切口韧性试验的管道部件用碳钢和低合金钢锻件标准规范ASTM A351/A351M-2006版承压件用奥氏体铸钢件标准规范ASTM A352/A352M-2006版低温承压用铁素体和马氏体铸钢件标准规范ASTM A356/A356M-2005版汽轮机用厚壁碳钢、低合金钢和不锈钢铸件标准技术条件ASTM A370-2005版钢制品力学性能试验方法和定义标准ASTM A387/A387M-2003版压力容器用铬钼合金钢板的标准规范ASTM A403/A403M-2004版锻制奥氏体不锈钢管配件的标准规范ASTM A450/A450M-2004版碳素钢管、铁素体合金钢管及奥氏体合金钢管一般要求的标准规范ASTM A479/A479M-2005版锅炉和其他压力容器用不锈钢棒材和型材标准技术条件ASTM A484/A484M-2005版不锈钢棒材、钢坯及锻件通用要求标准技术条件ASTM A500-2003a版圆形与异型冷成型焊接与无缝碳素钢结构管标准规范ASTM A515-2003版中温及高温压力容器用碳素钢板的标准规范ASTM A516-2004a版中温及低温压力容器用碳素钢板的标准规范ASTM A519-2003版机械工程用碳素钢和铝合金钢无缝钢管ASTM A530-2003版特种碳素钢和合金钢管一般要求的标准规范ASTM A577/A577M-90(R2001）版钢板超声斜射波检验ASTM A589/A589M-2006版打水井用碳素钢无缝钢管和焊接钢管ASTM A609/A609M-1991（82002）版碳钢、低合金钢和马氏体不锈钢铸件超声波检验ASTM A615/A615M-2004a版混凝土配筋用异形钢筋和无节钢胚棒标准规范ASTM A703/A703M-2004版标准技术条件—承压件钢铸件通用要求ASTM A751-2001版钢制品化学分析方法，实验操作和术语ASTM A781/A781M-2004a版铸件、钢和合金的标准规范及通用工业的一般性要求ASTM A788/A788M-2004a版标准技术条件—钢锻件通用要求ASTM A965/A965M-2002版高温承压件用奥氏体钢锻件标准规范ASTM B16/B16M-2005版螺纹切削机用易车削黄铜棒、条和型材标准规范ASTM B62/B62M-2002版青铜或高铜黄铜铸件标准规范ASTM B209-2004版铝和铝合金薄板和中厚板标准规范ASTM B462-2004版高温耐腐蚀用锻制或轧制的UNS NO6030、UNS NO6022、UNS NO6200、UNS NO8020、UNS NO8024、UNS NO8026、UNS NO8367、UNS NO10276、UNS N10665、UNS N10675和UNS R20033合金管法兰、锻制管件、阀门和零件标准规范ASTM B564-2004版镍合金锻件标准规范ASTM E6-2003版关于力学性能试验方法的标准术语ASTM E10-2001版金属材料布氏硬度的标准试验方法ASTM E18-2003版金属材料洛氏硬度和洛氏表面硬度的标准测试方法ASTM E29-2002版使用有效数字确定试验数据与规范符合性作法ASTM E8M-2004版金属材料拉伸试验的标准测试方法ASTM E94-2004版放射性检查的标准指南ASTM E125-1963（R2003）版铁铸件的磁粉检验用标准参考照片ASTM E164-2003版焊件的超声接触检验的标准操作规程ASTM E208-1995a(R2000)版用导向落锤试验测定铁素体钢无塑性转变温度的标准试验方法ASTM E213-2004版金属管超声检验方法ASTM E273-2001版焊接公称管和管子制品超声波检验用标准实用规程ASTM E709-2001版磁粉试验的推荐试验方法ASTM F36-1999(R2003）版测定垫片材料压缩率及回弹率的标准试验方法ASTM F37-2000版垫片材料密封性的标准试验方法ASTM F38-2000版垫片材料的蠕变松弛的标准试验方法ASTM F112-2000版包复垫片密封性能的标准试验方法ASTM F146-2004版垫片材料耐液体标准试验方法ASTM F1311-1990(R2001)版大口径组装式碳钢法兰标准规范ASTM G1-2003版腐蚀试样的制备、清洁处理和评定用标准实施规范ASTM G36-73(R1981) 参考资料标准实用规程：在沸的氯化镁溶液中进行的应力腐蚀裂纹试验ASTM G46-1976(R1986) 参考资料标准实用规程：麻点腐蚀的检验和评定ASTM G48-2003版使用三氯化铁溶液做不锈钢及其合金的耐麻点腐蚀和抗裂口腐蚀性试验的标准方法ASTM标准中译本丛书（一）碳钢、铸铁、不锈钢及合金钢材料标准规范（含18个标准)1. ASTM A105/A105M-2002版管道部件用碳钢锻件2. ASTM A126-1995(R2001)版阀门、法兰和管道附件用灰铁铸件3. ASTM A181/A181M-2001 版通用管路用碳钢锻件标准规范4. ASTM A193/A193M-2001版 ?高温用合金钢和不锈钢螺栓材料5. ASTM A194/A194M-2001a版高温、高压或高温高压螺栓用碳钢及合金钢螺母标准规范6. ASTM A216/A216M-2001a版高温用可熔焊碳钢铸件标准规范7. ASTM A217/A217M-2002 版高温承压件用马氏体不锈钢和合金钢铸件标准规范8. ASTM A276-2002a版不锈钢棒材和型材9. ASTM A278/A278M-2001版高温不超过650°F（350℃）的承压部件用灰铸铁件10. ASTM A320/A320M-2002 版低温用合金钢栓接材料11. ASTM A350/A350M-2002 版要求冲击韧性试验的管件用碳钢及低合金钢锻件标准规范12. ASTM A351/A351M-2000 版承压件用奥氏体、奥氏体-铁素体（双相）钢铸件规范13. ASTM A352/A352M-1993(R1998)版低温承压件用铁素体和马氏体钢铸件标准规范14. ASTM A395/A395M-1999 版高温用铁素体球墨铸铁承压铸件15. ASTM A439-1983(R1999)版奥氏体球墨铸铁件16. ASTM A536-1984(R1999)版球墨铸铁件17. ASTM A694/A694M-2000? 版高温输送用管法兰、管件、阀门及零件用碳钢和合金钢锻件标准规范18. ASTM A965/A965M-2002 版高温高压部件用奥氏体钢锻件ASTM标准中译本丛书（二）法兰、管件、阀门及部件（含9个标准）1. ASTM A182/A182M-2002版高温用锻制或轧制合金钢法兰、锻制管件、阀门和部件2. ASTM A961-2002版管道用钢制法兰、锻制管件、阀门和零件的通用要求标准规范3. ASTM B462-2002版高温耐腐蚀用锻制或轧制的UNS NO6030、UNS NO6022、UNS NO6200、UNS NO8020、UNS NO8024、UNS NO8026、UNS NO8367、UNS NO10276、UNS N10665、UNS N10675和UNS R20033合金管法兰、锻制管件、阀门和零件标准规范4. ASTM F885-1984（R2002）版公称管径为NPS 1/4～2的青铜截止阀外形尺寸标准规范5. ASTM F992-1986(R2001)版阀门铭牌标准规范6. ASTM F993-1986(R2001)版阀门锁紧装置标准规范7. ASTM F1030-1986(R1998)版阀门操作装置的选择准则8. ASTM F1098-1987(R1998)版公称管径有NPS2～24的蝶阀外形尺寸标准规范9. ASTM F1565-2000版蒸汽用减压阀规范。
ASTM标准的中文版本目录
ASTM标准的中文版本目录ASTM A6/A6M-2004 a结构用轧制钢板、型钢、板桩和棒钢通用要求ASTM A36/A36M-2004碳结构钢标准规范ASTM A106-2002a高温用无缝碳钢公称管规范ASTM A143-2003热侵镀锌结构钢制品防脆化的标准实施规程和催化探测方法ASTM A179/A179M-1990a（R2001）热交换器和冷凝器用无缝冷拉低碳钢管标准规范ASTM A192-2002高压设备用无缝碳钢锅炉管标准规范ASTM A209/A209M-2003锅炉和过热器用无缝碳钼合金钢管标准规范ASTM A210/A210M-2003锅炉和过热器用无缝中碳钢管技术条件ASTM A213/A213Mb-2004锅炉过热器和换热器用无缝铁素体和奥氏体合金钢传热管技术条件ASTM A234/A234M-2004中、高温用锻制碳钢和合金钢管道配件ASTM A252-98（R2002）焊接钢和无缝钢管桩的标准规范ASTM A262-2002a探测奥氏体不锈钢晶间腐蚀敏感度的标准实施规范ASTM A269/A269-2004通用无缝和焊接奥氏体不锈钢管标准规范ASTM A333/A333M-2004低温设备用无缝和焊接钢管的规范标准ASTM A334/A334M-2004低温设备用无缝和焊接碳素和合金钢管的标准规范ASTM A335-2003高温设备用无缝铁素体合金钢管标准规范ASTM A370/A370M-2003a钢制品力学性能试验方法和定义标准ASTM A387/A387M-2003压力容器用铬钼合金钢板的标准规范ASTM A403/A403M-2004锻制奥氏体不锈钢管配件的标准规范ASTM A450/A450M-2004碳素钢管、铁素体合金钢管及奥氏体合金钢管一般要求的标准规范ASTM A500-2003a圆形与异型冷成型焊接与无缝碳素钢结构管标准规范ASTM A515-2003中温及高温压力容器用碳素钢板的标准规范ASTM A516-2004a中温及低温压力容器用碳素钢板的标准规范ASTM A530-2003特种碳素钢和合金钢管一般要求的标准规范ASTM A615/A615M-2004a混凝土配筋用异形钢筋和无节钢胚棒标准规范ASTM A703/A703M-2004标准技术条件—承压件钢铸件通用要求ASTM A781/A781M-2004a铸件、钢和合金的标准规范及通用工业的一般性要求ASTM A788/A788M-2004a标准技术条件—钢锻件通用要求ASTM B209/B209M -2004铝和铝合金薄板和中厚板标准规范ASTM E6-2003金属材料布氏硬度的标准测试方法ASTM E18-2003金属材料洛氏硬度和洛氏表面硬度的标准测试方法ASTM E29-2002使用有效数字确定试验数据与规范符合性作法ASTM E8-2004金属材料拉伸试验的标准测试方法ASTM E94-2004放射性检查的标准指南ASTM E125-1963（R2003）铁铸件的磁粉检验用标准参考照片ASTM E164-2003焊件的超声接触检验的标准操作规程ASTM E208-1995a(R2000)用导向落锤试验测定铁素体钢无塑性转变温度的标准试验方法ASTM E213-2004金属管超声检验方法ASTM F36-1995测定垫片材料压缩率及回弹率的标准试验方法ASTM F37-1995垫片材料密封性的标准试验方法ASTM F38-1995垫片材料的蠕变松弛的标准试验方法ASTM F112-1995色覆垫片密封性能的标准试验方法ASTM F146-1995a垫片材料耐液体标准试验方法ASTM F1311-1995(R2001)大口径组装式碳钢法兰标准规范ASTM G1-2003腐蚀试样的制备、清洁处理和评定用标准实施规范ASTM G36-73(R1981) 参考资料标准实用规程：在沸的氯化镁溶液中进行的应力腐蚀裂纹试验ASTM G46-1976(R1986) 参考资料标准实用规程：麻点腐蚀的检验和评定ASTM G48-1976(R1980) 参考资料使用三氯化铁溶液做不锈钢及其合金的耐麻点腐蚀和抗裂口腐蚀性试验的标准方法ASTM标准中译本丛书（一）碳钢、铸铁、不锈钢及合金钢材料标准规范（含18个标准)ASTM A105/A105M-2002管道部件用碳钢锻件ASTM A126-1995(R2001)阀门、法兰和管道附件用灰铁铸件ASTM A181/A181M-2001通用管路用碳钢锻件标准规范ASTM A193/A193M-2001高温用合金钢和不锈钢螺栓材料ASTM A194/A194M-2001 a高温用合金钢和不锈钢螺栓材料ASTM A216/A216M-2001 a高温用可熔焊碳钢铸件标准规范ASTM A217/A217M-2002高温承压件用马氏体不锈钢和合金钢铸件标准规范ASTM A276-2002 a不锈钢棒材和型材ASTM A278/A278M-2001高温不超过650°F（350℃）的承压部件用灰铸铁件ASTM A320/A320M-2002低温用合金钢栓接材料ASTM A350/A350M-2002要求冲击韧性试验的管件用碳钢及低合金钢锻件标准规范ASTM A351/A351M-2000承压件用奥氏体、奥氏体-铁素体（双相）钢铸件规范ASTM A352/A352M-1993（R1998)低温承压件用铁素体和马氏体钢铸件标准规范ASTM A395/A395M-1999高温用铁素体球墨铸铁承压铸件ASTM A439-1983(R1999)奥氏体球墨铸铁件ASTM A536-1984(R1999)球墨铸铁件ASTM A694/A694M-2000高温输送用管法兰、管件、阀门及零件用碳钢和合金钢锻件标准规范ASTM A965/A965M-2002高温高压部件用奥氏体钢锻件ASTM标准中译本丛书（二）法兰、管件、阀门及部件（含9个标准）ASTM A182/A182M-2002高温用锻制或轧制合金钢法兰、锻制管件、阀门和部件ASTM A961-2002管道用钢制法兰、锻制管件、阀门和零件的通用要求标准规范ASTM B462-2002高温耐腐蚀用锻制或轧制的UNS NO6030、UNS NO6022、UNS NO6200、UNSNO8020、UNS NO8024、UNS NO8026、UNS NO8367、UNS NO10276、UNS N10665、UNS N10675和UNS R20033合金管法兰、锻制管件、阀门和零件标准规范ASTM F885-1984公称管径为NPS 1/4～2的青铜截止阀外形尺寸标准规范ASTM F992-1986(R2001)阀门铭牌标准规范ASTM F993-1986(R2001)阀门锁紧装置标准规范ASTM F1030-1986(R1998)阀门操作装置的选择准则ASTM F1098-1987(R1998)公称管径有NPS2～24的蝶阀外形尺寸标准规范ASTM F1565-2000蒸汽用减压阀规范。
美国ASTM标准
美国ASTM标准标准号中文名称英文名称A1-00碳素钢丁字轨Standard Specification for Carbon Steel Tee RailsA2-02普通型,带槽和防护型碳素工字钢轨Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard TypesA3-01低、中、高碳素钢鱼尾（连接）板Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)A6/A6M-04a轧制结构钢板材、型材和薄板桩通用技术要求Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling A20/A20M-04a压力容器用钢板材通用要求Standard Specification for General Requirements for Steel Plates for Pressure VesselsA27/A27M-03通用碳素钢铸件Standard Specification for Steel Castings, Carbon, for General ApplicationA29/A29M-04热锻及冷加工碳素钢和合金钢棒Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements forA31-04钢铆钉及铆钉和压力容器用棒材Standard Specification for Steel Rivets and Bars for Rivets, Pressure VesselsA34/A34M-01磁性材料的抽样和采购试验的标准惯例Standard Practice for Sampling and Procurement Testing of Magnetic MaterialsA36/A36M-04碳素结构钢技术规范Standard Specification for Carbon Structural SteelA47/A47M-99铁素体可锻铁铸件Standard Specification forFerritic Malleable Iron Castings A48/A48M-03灰铁铸件Standard Specification for Gray Iron CastingsA49-01经热处理的碳素钢鱼尾（连接）板，微合金鱼尾板及锻制碳素钢异型鱼尾板Standard Specification for Heat-Treated Carbon Steel Joint Bars,Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint BarsA53/A53M-04无镀层热浸的、镀锌的、焊接的及无缝钢管的技术规范Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and SeamlessA65-01钢轨道钉Standard Specification for Steel Track Spikes A66-01钢质螺旋道钉Standard Specification for Steel Screw Spikes A67-00热加工低碳钢和高碳钢垫板技术规范Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-WorkedA74-04铸铁污水管及配件的技术规范Standard Specification for Cast Iron Soil Pipe and FittingsA82-02钢筋混凝土用无节钢丝Standard Specification for Steel Wire, Plain, for Concrete ReinforcementA90/A90M-01镀锌和镀锌合金钢铁制品镀层重量的试验方法Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy CoatingsA99-03锰铁合金Standard Specification for Ferromanganese A100-04硅铁Standard Specification for FerrosiliconA101-04铬铁Standard Specification for FerrochromiumA102-04钒铁合金Standard Specification for Ferrovanadium A105/A105M-03管系部件用碳素钢锻件Standard Specification for Carbon Steel Forgings for Piping ApplicationsA106/A106M-04a高温用无缝碳素钢管Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service A108-03优质冷加工碳素钢棒材技术规范Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished A109/A109M-03冷轧碳素钢带技术规范Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-RolledA111-99a(2004)e1电话和电报线路用镀锌"铁"丝规格Standard Specification for Zinc-Coated (Galvanized) Iron Telephone and Telegraph Line WireA116-00镀锌钢丝编织栏栅网Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric A121-99(2004)镀锌刺钢丝Standard Specification for Mettalic-Coated Carbon Steel Barbed WireA123/A123M-02钢铁产品的锌镀层（热浸镀锌）技术规范Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel ProductsA125-96(2001)热处理螺旋形钢弹簧Standard Specification for Steel Springs, Helical, Heat-TreatedA126-04阀门、法兰和管配件用灰铁铸件Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe FittingsA128/A128M-93(2003)钢铸件,奥氏体锰Standard Specification for Steel Castings, Austenitic Manganese A131/A131M-04海船用结构钢Standard Specification for Structural Steel for ShipsA132-04钼铁合金Standard Specification for FerromolybdenumA134-96(2001)电熔(电弧)焊钢管(NPS为16英寸和16英寸以上)Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)A135-01电阻焊钢管Standard Specification for Electric-Resistance-Welded Steel PipeA139/A139M-04电熔(电弧)焊钢管(4英寸以上的)Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)A143/A143M-03热浸镀锌结构钢制品防脆裂措施和探测脆裂的程序Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting EmbrittlementA144-02铁钨合金规范Specification for FerrotungstenA146-04氧化钼制品Standard Specification for Molybdenum Oxide ProductsA148/A148M-03结构用高强度钢铸件Standard Specification for Steel Castings, High Strength, for Structural Purposes A153/A153M-04钢铁制金属构件上镀锌层(热浸)Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel HardwareA159-83(2001)汽车用灰铁铸件Standard Specification for Automotive Gray Iron CastingsA167-99不锈钢和耐热铬镍钢板、薄板及带材Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and StripA176-99不锈钢和耐热铬钢板、薄板及带材Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and StripA178/A178M-02电阻焊接碳素钢钢管及碳锰钢锅炉和过热器管的技术规范Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater TubesA179/A179M-90a(2001)热交换器和冷凝器用无缝冷拉低碳钢管Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser TubesA181/A181M-01普通锻制碳素钢管的规格Standard Specification for Carbon Steel Forgings, for General-Purpose PipingA182/A182M-02高温设备用锻制或轧制的合金钢管法兰、锻制管件、阀门及零件Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges,Forged Fittings, and Valves and Parts for High-Temperature ServiceA183-03钢轨用碳素钢螺栓和螺母Standard Specification for Carbon Steel Track Bolts and NutsA184/A184M-01混凝土加筋用变形钢筋编织网Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete ReinforcementA185-02钢筋混凝土用焊接钢丝结构Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete A192/A192M-02高压用无缝碳素钢锅炉管Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure ServiceA193/A193M-04b高温设备用合金钢和不锈钢螺栓材料Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature ServiceA194/A194M-04a高温和高压设备用碳素钢与合金钢螺栓和螺母的规格Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both A197/A197M-00化铁炉用可锻铸铁Standard Specification forCupola Malleable IronA202/A202M-03压力容器用铬锰硅合金钢板Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-SiliconA203/A203M-97(2003)压力容器用镍合金钢板Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel A204/A204M-03压力容器用钼合金钢板Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum A209/A209M-03锅炉和过热器用无缝碳钼合金钢管Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater TubesA210/A210M-02锅炉和过热器用无缝中碳素管Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater TubesA213/A213M-04无缝铁素体和奥氏体合金钢锅炉、过热器和换热器管Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes A214/A214M-96(2001)热交换器与冷凝器用电阻焊接碳素钢管Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser TubesA216/A216M-93(2003)高温下使用的适合于熔焊的碳素钢铸件规格Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High- Temperature ServiceA217/A217M-02适合高温受压零件用合金钢和马氏体不锈钢铸件Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature ServiceA220/A220M-99珠光体可锻铁Standard Specification for Pearlitic Malleable IronA225/A225M-03压力容器用锰矾镍合金钢板StandardSpecification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-NickelA227/A227M-99机械弹簧用冷拉钢丝Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs A228/A228M-02乐器用优质弹簧钢丝Standard Specification for Steel Wire, Music Spring QualityA229/A229M-99机械弹簧用油回火的钢丝Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs A230/A230M-99阀门用油回火优质碳素钢弹簧丝Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring QualityA231/A231M-96(2002)铬钒合金钢弹簧丝Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire A232/A232M-99阀门用优质铬钒合金钢弹簧丝Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality WireA234/A234M-04中温与高温下使用的锻制碳素钢及合金钢管配件Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service A239-95(2004)用普力斯试验法(硫酸铜浸蚀)确定铁或钢制品上镀锌层最薄点的测试方法Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized)Coating on Iron or Steel ArticlesA240/A240M-04ae1压力容器用耐热铬及铬镍不锈钢板、薄板及带材Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General ApplicationsA242/A242M-04高强度低合金结构钢Standard Specificationfor High-Strength Low-Alloy Structural SteelA247-67(1998)铁铸件中石墨显微结构评定试验方法Standard Test Method for Evaluating the Microstructure of Graphite in Iron CastingsA249/A249M-04锅炉、过热器、换热器和冷凝器用焊接奥氏体钢管Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser TubesA250/A250M-04锅炉和过热器用电阻焊铁素体合金钢管Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater TubesA252-98(2002)焊接钢和无缝钢管桩Standard Specification for Welded and Seamless Steel Pipe Piles A254-97(2002)铜焊钢管规格Standard Specification for Copper-Brazed Steel Tubing A255-02测定钢淬透性用末端淬火试验的标准试验方法Standard Test Method for Determining Hardenability of SteelA262-03奥氏体不锈钢晶间浸蚀敏感性的检测Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless SteelsA263-03耐腐蚀铬钢包覆板材,薄板材及带材技术规范Standard Specification for Stainless Chromium Steel-Clad Plate A264-03包覆的不锈铬镍钢板,薄板及带材规格Specification for Stainless Chromium-Nickel Steel-Clad PlateA265-03镍和镍基合金包覆钢板规格Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel PlateA266/A266M-03a压力容器部件用碳素钢锻件规格Standard Specification for Carbon Steel Forgings for Pressure Vessel ComponentsA268/A268M-04一般设备用无缝和焊接铁素体与马氏体不锈钢管Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General ServiceA269-04一般设备用无缝和焊接奥氏体不锈钢管Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General ServiceA270-03a卫生设施用无缝钢和焊接奥氏体不锈钢管Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary TubingA275/A275M-98(2003)钢锻件的磁粉检查试验方法Standard Test Method for Magnetic Particle Examination of Steel Forgings A276-04不锈钢棒材和型材Standard Specification for Stainless Steel Bars and ShapesA278/A278M-01适用于650F容压部件用灰铸铁件的技术规范Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C) A283/A283M-03低和中等抗拉强度碳素钢板Standard Specification for Low and Intermediate Tensile Strength Carbon Steel PlatesA285/A285M-03压力容器用低和中等抗拉强度的碳素钢板Intermediate-Tensile StrengthA288-91(2003)涡轮发电机磁性定位环用碳素钢和合金钢锻件Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine GeneratorsA289/A289M-97(2003)发电机非磁性定位环用合金钢锻件的技术规范Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for GeneratorsA290-02减速器环用碳素钢和合金钢锻件Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction GearsA291-03减速器小齿轮、齿轮和心轴用碳素钢和合金钢锻件Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction GearsA295-98高碳耐磨轴承钢技术规范Standard Specification for High-Carbon Anti-Friction Bearing SteelA297/A297M-97(2003)一般用耐热铬铁与镍铬铁合金钢铸件规格Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application A299/A299M-04压力容器用锰硅碳钢板Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-SiliconA302/A302M-03压力容器用锰钼和锰钼镍合金钢板Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-NickelA304-04有末端淬火淬透性要求的合金钢棒材的技术规范Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability RequirementsA307-04抗拉强度为60000psi的碳素钢螺栓和螺柱的技术规范Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile StrengthA308/A308M-03经热浸处理镀有铅锡合金的薄板材的技术规范Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip ProcessA309-01用三点试验法测定长镀锌薄钢板镀层的重量成分的试验方法Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot TestA311/A311M-04有机械性能要求的消除应力的冷拉碳素钢棒Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements A312/A312M-04a无缝和焊接奥氏体不锈钢管Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel PipesA313/A313M-03不锈钢弹簧丝技术规范StandardSpecification for Stainless Steel Spring WireA314-97(2002)锻造用不锈及耐热钢坯及钢棒规格Standard Specification for Stainless Steel Billets and Bars for Forging A319-71(2001)高温无压部件用灰铁铸件Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing PartsA320/A320M-04低温用合金钢螺栓材料规格Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-T emperature ServiceA321-90(2001)经淬火和回火的碳素钢棒Standard Specification for Steel Bars, Carbon, Quenched and T empered A322-91(2001)e1合金钢棒材.级别Standard Specification for Steel Bars, Alloy, Standard GradesA323-93(2000)硼铁规格Standard Specification for FerroboronA324-73(2000)钛铁合金Standard Specification for FerrotitaniumA325-04a经热处理最小抗拉强度为120/105ksi的热处理钢结构螺栓Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile StrengthA325M-04a经热处理最小抗拉强度为830Mpa的热处理钢结构螺栓Minimum Tensile Strength [Metric]A327-91(1997)铸铁冲击试验方法Standard Test Methods for Impact Testing of Cast IronsA327M-91(1997)铸铁冲击试验方法(米制)Standard Test Methods for Impact Testing of Cast Irons (Metric) A328/A328M-03薄钢板桩Standard Specification for Steel Sheet Piling A333/A333M-04a低温用无缝与焊接钢管规格Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature ServiceA334/A334M-04a低温设备用无缝与焊接碳素和合金钢管Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-T emperature ServiceA335/A335M-03高温用无缝铁素体合金钢管Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature ServiceA336/A336M-03a压力与高温部件用合金钢锻件规格Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature PartsA338-84(2004)铁路,船舶和其他重型装备在温度达到650华氏度(345摄氏度)时使用的可锻铸铁法兰,管件和阀门零件Standard Specification for Malleable Iron Flanges, Pipe Fittings, andValve Parts for Railroad, Marine, and Other Heavy Duty Service atTemperatures Up to 650°F (345°C)A340-03a有关磁性试验用符号和定义的术语Standard Terminology of Symbols and Definitions Relating to Magnetic TestingA341/A341M-00用直流磁导计和冲击试验法测定材料的直流磁性能的试验方法Standard Test Method for Direct Current Magnetic Properties of MaterialsUsing D-C Permeameters and the Ballistic Test MethodsA342/A342M-99磁铁材料导磁率的试验方法Standard Test Methods for Permeability of Feebly Magnetic Materials A343/A343M-03在电力频率下用瓦特计-安培计-伏特计法(100-1000赫兹)和25 厘米艾普斯亭(EPSTEIN) 机架测定材料的交流电磁性能的试验方法Standard Test Method for Alternating-Current Magnetic Properties ofMaterials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Methodand 25-cm Epstein Test FrameA345-98磁设备用平轧电炉钢Standard Specification for Flat-Rolled Electrical Steels for Magnetic ApplicationsA348/A348M-00用瓦特计--安培计--伏特计法(100-10000赫兹)和25厘米艾普斯亭框测定材料的交流磁性能的试验方法Standard Test Method for Alternating Current Magnetic Properties ofMaterials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hzand 25-cm Epstein FrameA350/A350M-04要求进行缺口韧性试验的管道部件用碳素钢与低合金钢锻件技术规范Standard Specification for Carbon and Low-Alloy Steel Forgings, RequiringNotch Toughness T esting for Piping ComponentsA351/A351M-03容压零件用奥氏体及奥氏体铁素体铸铁的技术规范Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing PartsA352/A352M-03低温受压零件用铁素体和马氏体钢铸件规格Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature ServiceA353/A353M-93(1999)压力容器用经二次正火及回火处理的含9％镍的合金钢板Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered A354-04淬火与回火合金钢螺栓,双头螺栓及其他外螺纹紧固件规格Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded FastenersA355-89(2000)渗氮用合金钢棒Standard Specification for Steel Bars, Alloys, for NitridingStandard Specification for Steel Castings, Carbon, Low Alloy, andA356/A356M-98(2003)蒸汽轮机用厚壁碳素钢、低合金钢和不锈钢铸件Stainless Steel, Heavy-Walled for Steam Turbines A358/A358M-04高温用电熔焊奥氏体铬镍合金钢管Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General ApplicationsA363-03地面架空线用镀锌钢丝绳Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand A367-60(1999)铸铁的激冷试验方法Standard Test Methods of Chill Testing of Cast IronA368-95a(2000)不锈钢和耐热钢丝绳的标准Standard Specification for Stainless Steel Wire StrandA369/A369M-02高温用锻制和镗孔碳素钢管和铁素体合金钢管Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature ServiceA370-03a钢制品机械测试的标准试验方法和定义Standard Test Methods and Definitions for Mechanical Testing of Steel Products A372/A372M-03薄壁压力容器用碳素钢及合金钢锻件Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure VesselsA376/A376M-02a高温中心站用无缝奥氏钢管Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station ServiceA377-03球墨铸铁压力管规范索引Standard Index of Specifications for Ductile-Iron Pressure PipeA380-99e1不锈钢零件、设备和系统的清洗和除垢Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and SystemsA381-96(2001)高压输送用金属弧焊钢管Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission SystemsA384/A384M-02防止钢组件热浸镀锌时翘曲和扭曲用安全保护Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies A385-03提供高质量镀锌覆层(热浸)Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)A387/A387M-03压力容器用铬钼合金钢板Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-MolybdenumA388/A388M-03重型钢锻件超声波检测Standard Practice for Ultrasonic Examination of Heavy Steel ForgingsA389/A389M-03适合高温受压部件用经特殊热处理的合金钢铸件规格Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature ServiceA390-95(2001)饲养家禽用镀锌钢丝栏栅网(六角形和直线形)Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)A391/A391M-0180号合金钢链条Standard Specification for Grade 80 Alloy Steel ChainA392-03镀锌钢丝链环栏栅网Standard Specification for Zinc-Coated Steel Chain-Link Fence FabricA394-04传动塔架用镀锌和裸露钢螺栓Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare A395/A395M-99e1高温用铁素体球墨铸铁受压铸件Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated TemperaturesA400-69(2000)钢棒的成分及机械性能选择指南Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical PropertiesA401/A401M-03铬硅合金钢丝Standard Specification for Steel Wire, Chromium-Silicon AlloyA403/A403M-04锻制奥氏体不锈钢管配件Standard Specification for Wrought Austenitic Stainless Steel Piping FittingsA407-93(2004)盘簧用冷拉钢丝Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type SpringsA409/A409M-01腐蚀场所或高温下使用的焊接大口径奥氏体钢管Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-T emperature Service A411-03镀锌低碳钢铠装线Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor WireA413/A413M-01碳素钢链Standard Specification for Carbon Steel ChainA414/A414M-04压力容器用碳素薄钢板Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels A416/A416M-02预应力混凝土用无涂层七股钢铰线Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed ConcreteA417-93(2004)之字形、方形、正弦形家具用弹簧元件用冷拔钢丝Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units A418-99(2003)涡轮机及发电机钢转子锻件的超声波检查方法Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor ForgingsA420/A420M-04低温下用锻制碳素钢和合金钢管配件Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature ServiceA421/A421M-02预应力混凝土用无涂层消除应力钢丝的技术规范Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed ConcreteA423/A423M-95(2000)无缝和电焊低合金钢管Standard Specification for Seamless and Electric-Welded Low-Alloy Steel TubesA424-00搪瓷用钢薄板Standard Specification for Steel, Sheet, for Porcelain EnamelingA426/A426M-02高温用离心铸造的铁素体合金钢管Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature ServiceA427-02冷轧和热轧用锻制合金钢辊Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction A428/A428M-01钢铁制品上铝覆层重量的测试方法Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel ArticlesA434-04热轧与冷精轧经回火及淬火的合金钢棒Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and TemperedA435/A435M-90(2001)钢板的直射束纵向超声波检验Standard Specification for Straight-Beam Ultrasonic Examination of Steel PlatesA436-84(2001)奥氏体灰口铁铸件Standard Specification for Austenitic Gray Iron CastingsA437/A437M-01a高温用经特殊处理的涡轮型合金钢螺栓材料Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service A439-83(1999)奥氏体可锻铸铁铸件Standard Specification for Austenitic Ductile Iron CastingsA447/A447M-93(2003)高温用镍铬铁合金钢铸件(25-12级)Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service A449-04a经淬火和回火的钢螺栓和螺柱Standard Specification for Quenched and Tempered Steel Bolts and StudsStandard Specification for General Requirements for Carbon, FerriticA450/A450M-04碳素钢管、铁素体合金钢管及奥氏体合金钢管Alloy, and Austenitic Alloy Steel TubesA451/A451M-02高温用离心铸造的奥氏体钢管Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature ServiceA453/A453M-03具有同奥氏体钢相类似的膨胀系数、屈服强度为50-120Ksi(345-827MPa)的耐高温螺栓材料Standard Specification for High-Temperature Bolting Materials, withExpansion Coefficients Comparable to Austenitic Stainless SteelsA455/A455M-03压力容器用高强度碳锰钢板Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength ManganeseA456/A456M-99(2003)大型曲轴锻件的磁粉检查StandardSpecification for Magnetic Particle Examination of Large Crankshaft ForgingsA459-97(2003)镀锌平轧扁钢铠装带Standard Specification for Zinc-Coated Flat Steel Armoring Tape A460-94(2004)e1包铜钢丝绳标准Standard Specification for Copper-Clad Steel Wire Strand A463/A463M-02a热浸镀铝薄钢板Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process A466/A466M-01非焊接碳素钢链Standard Specification for Weldless ChainA467/A467M-01机器链和盘旋链Standard Specification for Machine and Coil ChainA469-04用于发电机转子的真空处理钢锻件Standard Specification for Vacuum-Treated Steel Forgings for Generator RotorsA470-03涡轮机转子和轴用经真空处理的碳素钢和合金锻件Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and ShaftsA471-02涡轮转子转盘和转轮用真空处理合金钢锻件技术规范Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and WheelsA472-98(2003)蒸汽涡轮机轴及转子锻件的热稳定性的试验方法Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor ForgingsA473-01不锈和耐热钢锻件Standard Specification for Stainless Steel ForgingsA474-03包铝钢丝绳标准Standard Specification for Aluminum-Coated Steel Wire Strand A475-03镀锌钢丝绳Standard Specification for Zinc-Coated Steel Wire Strand A476/A476M-00造纸厂干燥辊用球墨可锻铸铁件Standard Specification for Ductile Iron Castings for Paper Mill Dryer RollsA478-97(2002)铬镍不锈钢和耐热钢制编织钢丝Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting WireA479/A479M-04锅炉及压力容器用不锈钢和耐热钢棒与型材Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure VesselsA480/A480M-04扁平轧制耐热不锈钢厚板材、薄板材和带材通用要求Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip A481-94(2000)金属铬Standard Specification for Chromium MetalA482-93(2000)铬铁硅Standard Specification for Ferrochrome-Silicon A483-64(2000)硅锰合金Standard Specification for SilicomanganeseA484/A484M-03a不锈及耐热锻钢棒,钢坯及锻件的规格Standard Specification for General Requirements for Stainless Steel Bars, Billets, and ForgingsA485-03高淬透性耐磨轴承钢的技术规范Standard Specification for High Hardenability Antifriction Bearing Steel A487/A487M-93(1998)受压钢铸件Standard Specification for Steel Castings Suitable for Pressure ServiceA488/A488M-01e1钢铸件焊接规程和工作人员的合格鉴定Standard Practice for Steel Castings, Welding, Qualifications of Procedures and PersonnelA489-04碳素钢吊耳Standard Specification for Carbon Steel Lifting EyesA490M-04a最小拉伸强度为150千磅/平方英寸热处理钢结构螺栓Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile StrengthA490-04a最小拉伸强度为150千磅/平方英寸热处理钢结构螺栓Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]A491-03镀铝钢链环栏栅结构Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric A492-95(2000)耐热不锈钢丝绳Standard Specification for Stainless Steel Rope WireA493-95(2000)冷镦和冷锻不锈钢和耐热钢丝Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold ForgingA494/A494M-03ae1镍和镍合金铸件Standard Specification for Castings, Nickel and Nickel Alloy A495-94(2000)硅钙合金钢技术规范Standard Specification for Calcium-Silicon Alloys A496-02钢筋混凝土用变形钢丝Standard Specification for Steel Wire, Deformed, for Concrete ReinforcementA497/A497M-02钢筋混凝土用焊接变形钢丝网Standard Specification for Steel Welded Wire Reinforcement, Deformed, for ConcreteA498-04无缝与焊接碳素钢,铁素体钢与奥氏体钢制有整体散热片的换热器钢管Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral FinsA499-89(2002)轧制丁字钢轨用的碳素钢棒材及型材的技术规范Standard Specification for Steel Bars and Shapes, Carbon Rolled from T RailsA500-03a圆形与异型焊接与无缝碳素钢结构管Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and ShapesA501-01热成型焊接与无缝碳素钢结构管StandardSpecification for Hot-Formed Welded and Seamless Carbon Steel Structural TubingA502-03结构钢铆钉规范Standard Specification for Rivets, Steel, StructuralA503/A503M-01(2001)e1锻制大型曲轴的超声波检验Standard Specification for Ultrasonic Examination of Forged Crankshafts A504-04e1锻制碳素钢轮Standard Specification for Wrought Carbon Steel Wheels A505-00热轧和冷轧合金钢薄板和带材Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements forA506-04正规质量及优质结构的热轧和冷轧合金钢薄板与带材Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-RolledA507-04优质拉拔,热轧和冷轧合金钢薄板与带材Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-RolledA508/A508M-04b压力容器用经回火和淬火真空处理的碳素钢与合金钢锻件Standard Specification for Quenched and T empered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure VesselsA510-03碳素钢盘条和粗圆钢丝通用要求Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon SteelStandard Specification for General Requirements for Wire Rods and CoarseA510M-03碳素钢盘条和粗圆钢丝通用要求Round Wire, Carbon Steel [Metric]A511-04无缝不锈钢机械管Standard Specification for Seamless Stainless Steel Mechanical TubingA512-96(2001)冷拉对缝焊碳素钢机械管Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical TubingA513-00电阻焊碳素钢与合金钢机械钢管Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical TubingA514/A514M-00a焊接用经回火与淬火的高屈服强度合金钢板Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for WeldingA515/A515M-03中温及高温压力容器用碳素钢板Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature ServiceA516/A516M-04中温及低温压力容器用碳素钢板Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature ServiceA517/A517M-93(1999)压力容器用经回火与淬火的高强度合金钢板Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and TemperedA518/A518M-99(2003)耐蚀高硅铁铸件Standard Specification for Corrosion-Resistant High-Silicon Iron CastingsA519-03无缝碳素钢与合金钢机械管Standard Specification for Seamless Carbon and Alloy Steel Mechanical TubingA521-03一般工业用闭式模钢锻件Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use A522/A522M-01低温用锻制或轧制含镍8%和9%的合金钢法兰,配件,阀门和零件规格Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy SteelFlanges, Fittings, Valves, and Parts for Low-T emperature。
ASTM A系列(黑色金属)标准目录(中英文)
标准号中文名称英文名称A1-00 碳素钢丁字轨Standard Specification for Carbon Steel Tee RailsA2-02 普通型,带槽和防护型碳素工字钢轨Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard TypesA3-01 低、中、高碳素钢鱼尾（连接）板Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)A6/A6M-04a 轧制结构钢板材、型材和薄板桩通用技术要求Standard Specification for General Requirementsfor Rolled Structural Steel Bars, Plates,Shapes, and Sheet PilingA20/A20M-04a 压力容器用钢板材通用要求Standard Specification for General Requirements for Steel Plates for Pressure VesselsA27/A27M-03 通用碳素钢铸件Standard Specification for Steel Castings, Carbon, for General ApplicationA29/A29M-04 热锻及冷加工碳素钢和合金钢棒Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements forA31-04 钢铆钉及铆钉和压力容器用棒材Standard Specification for Steel Rivets and Bars for Rivets, Pressure VesselsA34/A34M-01 磁性材料的抽样和采购试验的标准惯例Standard Practice for Sampling and ProcurementTesting of Magnetic MaterialsA36/A36M-04 碳素结构钢技术规范Standard Specification for Carbon Structural SteelA47/A47M-99 铁素体可锻铁铸件Standard Specification for Ferritic Malleable Iron CastingsA48/A48M-03 灰铁铸件Standard Specification for Gray Iron CastingsA49-01 经热处理的碳素钢鱼尾（连接）板，微合金鱼尾板及锻制碳素钢异型鱼尾板Standard Specification for Heat-Treated CarbonSteel Joint Bars, Microalloyed Joint Bars, andForged Carbon Steel Compromise Joint BarsA53/A53M-04 无镀层热浸的、镀锌的、焊接的及无缝钢管的技术规范Standard Specification for Pipe, Steel, Blackand Hot-Dipped, Zinc-Coated, Welded andSeamlessA65-01 钢轨道钉Standard Specification for Steel Track Spikes A66-01 钢质螺旋道钉Standard Specification for Steel Screw SpikesA67-00 热加工低碳钢和高碳钢垫板技术规范Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-WorkedA74-04 铸铁污水管及配件的技术规范Standard Specification for Cast Iron Soil Pipe and FittingsA82-02 钢筋混凝土用无节钢丝Standard Specification for Steel Wire, Plain, for Concrete ReinforcementA90/A90M-01 镀锌和镀锌合金钢铁制品镀层重量的试验方法Standard Test Method for Weight [Mass] ofCoating on Iron and Steel Articles with Zinc orZinc-Alloy CoatingsA99-03 锰铁合金Standard Specification for FerromanganeseASTM A系列（黑色金属）标准目录（中英文）A100-04 硅铁Standard Specification for Ferrosilicon A101-04 铬铁Standard Specification for Ferrochromium A102-04 钒铁合金Standard Specification for FerrovanadiumA105/A105M-03 管系部件用碳素钢锻件Standard Specification for Carbon Steel Forgings for Piping ApplicationsA106/A106M-04a 高温用无缝碳素钢管Standard Specification for Seamless Carbon Steel Pipe for High-Temperature ServiceA108-03 优质冷加工碳素钢棒材技术规范Standard Specification for Steel Bar, Carbon and Alloy, Cold-FinishedA109/A109M-03 冷轧碳素钢带技术规范Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-RolledA111-99a(2004)e1 电话和电报线路用镀锌"铁"丝规格Standard Specification for Zinc-Coated (Galvanized) Iron Telephone and Telegraph Line WireA116-00 镀锌钢丝编织栏栅网Standard Specification for Metallic-Coated, Steel Woven Wire Fence FabricA121-99(2004) 镀锌刺钢丝Standard Specification for Mettalic-Coated Carbon Steel Barbed WireA123/A123M-02 钢铁产品的锌镀层（热浸镀锌）技术规范Standard Specification for Zinc (Hot-DipGalvanized) Coatings on Iron and Steel ProductsA125-96(2001) 热处理螺旋形钢弹簧Standard Specification for Steel Springs, Helical, Heat-TreatedA126-04 阀门、法兰和管配件用灰铁铸件Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe FittingsA128/A128M-93(2003) 钢铸件,奥氏体锰Standard Specification for Steel Castings, Austenitic ManganeseA131/A131M-04 海船用结构钢Standard Specification for Structural Steel for ShipsA132-04 钼铁合金Standard Specification for FerromolybdenumA134-96(200 1) 电熔(电弧)焊钢管(NPS为16英寸和16英寸以上)Standard Specification for Pipe, Steel,Electric-Fusion (Arc)-Welded (Sizes NPS 16 andOver)A135-01 电阻焊钢管Standard Specification for Electric-Resistance-Welded Steel PipeA139/A139M-04 电熔(电弧)焊钢管(4英寸以上的) Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)A143/A143M-03 热浸镀锌结构钢制品防脆裂措施和探测脆裂的程序Standard Practice for Safeguarding AgainstEmbrittlement of Hot-Dip Galvanized StructuralSteel Products and Procedure for DetectingEmbrittlementA144-02 铁钨合金规范Specification for FerrotungstenA146-04 氧化钼制品Standard Specification for Molybdenum Oxide ProductsA148/A148M-03 结构用高强度钢铸件Standard Specification for Steel Castings, High Strength, for Structural PurposesA153/A153M-04 钢铁制金属构件上镀锌层(热浸) Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel HardwareA159-83(2001) 汽车用灰铁铸件Standard Specification for Automotive Gray Iron CastingsA167-99 不锈钢和耐热铬镍钢板、薄板及带材Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and StripA176-99 不锈钢和耐热铬钢板、薄板及带材Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and StripA178/A178M-02 电阻焊接碳素钢钢管及碳锰钢锅炉和过热器管的技术规范Standard Specification forElectric-Resistance-Welded Carbon Steel andCarbon-Manganese Steel Boiler and SuperheaterTubesA179/A179M-90a(2001) 热交换器和冷凝器用无缝冷拉低碳钢管Standard Specification for Seamless Cold-DrawnLow-Carbon Steel Heat-Exchanger and CondenserTubesA181/A181M-01 普通锻制碳素钢管的规格Standard Specification for Carbon Steel Forgings, for General-Purpose PipingA182/A182M-02 高温设备用锻制或轧制的合金钢管法兰、锻制管件、阀门及零件Standard Specification for Forged or RolledAlloy-Steel Pipe Flanges, Forged Fittings, andValves and Parts for High-Temperature ServiceA183-03 钢轨用碳素钢螺栓和螺母Standard Specification for Carbon Steel Track Bolts and NutsA184/A184M-01 混凝土加筋用变形钢筋编织网Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete ReinforcementA185-02 钢筋混凝土用焊接钢丝结构Standard Specification for Steel Welded Wire Reinforcement, Plain, for ConcreteA192/A192M-02 高压用无缝碳素钢锅炉管Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure ServiceA193/A193M-04b 高温设备用合金钢和不锈钢螺栓材料Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature ServiceA194/A194M-04a 高温和高压设备用碳素钢与合金钢螺栓和螺母的规格Standard Specification for Carbon and AlloySteel Nuts for Bolts for High Pressure or HighTemperature Service, or BothA197/A197M-00 化铁炉用可锻铸铁Standard Specification for Cupola Malleable IronA202/A202M-03 压力容器用铬锰硅合金钢板Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-SiliconA203/A203M-压力容器用镍合金钢板Standard Specification for Pressure Vessel97(2003) Plates, Alloy Steel, NickelA204/A204M-03 压力容器用钼合金钢板Standard Specification for Pressure Vessel Plates, Alloy Steel, MolybdenumA209/A209M-03 锅炉和过热器用无缝碳钼合金钢管Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater TubesA210/A210M-02 锅炉和过热器用无缝中碳素管Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater TubesA213/A213M-04 无缝铁素体和奥氏体合金钢锅炉、过热器和换热器管Standard Specification for Seamless Ferriticand Austenitic Alloy-Steel Boiler, Superheater,and Heat-Exchanger TubesA214/A214M-96(2001) 热交换器与冷凝器用电阻焊接碳素钢管Standard Specification forElectric-Resistance-Welded Carbon SteelHeat-Exchanger and Condenser TubesA216/A216M-93(2003) 高温下使用的适合于熔焊的碳素钢铸件规格Standard Specification for Steel Castings,Carbon, Suitable for Fusion Welding, for High-Temperature ServiceA217/A217M-02 适合高温受压零件用合金钢和马氏体不锈钢铸件Standard Specification for Steel Castings,Martensitic Stainless and Alloy, forPressure-Containing Parts, Suitable forHigh-Temperature ServiceA220/A220M-99 珠光体可锻铁Standard Specification for Pearlitic Malleable IronA225/A225M-03 压力容器用锰矾镍合金钢板Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-NickelA227/A227M-99 机械弹簧用冷拉钢丝Standard Specification for Steel Wire, Cold-Drawn for Mechanical SpringsA228/A228M-02 乐器用优质弹簧钢丝Standard Specification for Steel Wire, Music Spring QualityA229/A229M-99 机械弹簧用油回火的钢丝Standard Specification for Steel Wire, Oil-Tempered for Mechanical SpringsA230/A230M-99 阀门用油回火优质碳素钢弹簧丝Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring QualityA231/A231M-96(2002) 铬钒合金钢弹簧丝Standard Specification for Chromium-Vanadium Alloy Steel Spring WireA232/A232M-99 阀门用优质铬钒合金钢弹簧丝Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality WireA234/A234M-04 中温与高温下使用的锻制碳素钢及合金钢管配件Standard Specification for Piping Fittings ofWrought Carbon Steel and Alloy Steel forModerate and High Temperature ServiceA239-95(200 4) 用普力斯试验法(硫酸铜浸蚀)确定铁或钢制品上镀锌层最薄点的测试方法Standard Practice for Locating the Thinnest Spotin a Zinc (Galvanized) Coating on Iron or SteelArticlesA240/A240M-04ae1 压力容器用耐热铬及铬镍不锈钢板、薄板及带材Chromium-Nickel Stainless Steel Plate, Sheet,and Strip for Pressure Vessels and for GeneralApplicationsA242/A242M-04 高强度低合金结构钢Standard Specification for High-Strength Low-Alloy Structural SteelA247-67(1998) 铁铸件中石墨显微结构评定试验方法Standard Test Method for Evaluating the Microstructure of Graphite in Iron CastingsA249/A249M-04 锅炉、过热器、换热器和冷凝器用焊接奥氏体钢管Standard Specification for Welded AusteniticSteel Boiler, Superheater, Heat-Exchanger, andCondenser TubesA250/A250M-04 锅炉和过热器用电阻焊铁素体合金钢管Standard Specification forElectric-Resistance-Welded FerriticAlloy-Steel Boiler and Superheater TubesA252-98(2002) 焊接钢和无缝钢管桩Standard Specification for Welded and Seamless Steel Pipe PilesA254-97(2002) 铜焊钢管规格Standard Specification for Copper-Brazed Steel TubingA255-02 测定钢淬透性用末端淬火试验的标准试验方法Standard Test Method for DeterminingHardenability of SteelA262-03 奥氏体不锈钢晶间浸蚀敏感性的检测Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless SteelsA263-03 耐腐蚀铬钢包覆板材,薄板材及带材技术规范Standard Specification for Stainless ChromiumSteel-Clad PlateA264-03 包覆的不锈铬镍钢板,薄板及带材规格Specification for Stainless Chromium-NickelSteel-Clad PlateA265-03 镍和镍基合金包覆钢板规格Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel PlateA266/A266M-03a 压力容器部件用碳素钢锻件规格Standard Specification for Carbon Steel Forgings for Pressure Vessel ComponentsA268/A268M-04 一般设备用无缝和焊接铁素体与马氏体不锈钢管Standard Specification for Seamless and WeldedFerritic and Martensitic Stainless Steel Tubingfor General ServiceA269-04 一般设备用无缝和焊接奥氏体不锈钢管Standard Specification for Seamless and WeldedAustenitic Stainless Steel Tubing for GeneralServiceA270-03a 卫生设施用无缝钢和焊接奥氏体不锈钢管Standard Specification for Seamless and WeldedAustenitic Stainless Steel Sanitary TubingA275/A275M-98(2003) 钢锻件的磁粉检查试验方法Standard Test Method for Magnetic Particle Examination of Steel ForgingsA276-04 不锈钢棒材和型材Standard Specification for Stainless Steel Bars and ShapesA278/A278M-01 适用于650F容压部件用灰铸铁件的技术规范for Pressure-Containing Parts for TemperaturesUp to 650°F (350°C)A283/A283M-03 低和中等抗拉强度碳素钢板Standard Specification for Low and Intermediate Tensile Strength Carbon Steel PlatesA285/A285M-03 压力容器用低和中等抗拉强度的碳素钢板Standard Specification for Pressure VesselPlates, Carbon Steel, Low- andIntermediate-Tensile StrengthA288-91(200 3) 涡轮发电机磁性定位环用碳素钢和合金钢锻件Standard Specification for Carbon and AlloySteel Forgings for Magnetic Retaining Rings forTurbine GeneratorsA289/A289M-97(2003) 发电机非磁性定位环用合金钢锻件的技术规范Standard Specification for Alloy Steel Forgingsfor Nonmagnetic Retaining Rings for GeneratorsA290-02 减速器环用碳素钢和合金钢锻件Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction GearsA291-03 减速器小齿轮、齿轮和心轴用碳素钢和合金钢锻件Standard Specification for Steel Forgings,Carbon and Alloy, for Pinions, Gears and Shaftsfor Reduction GearsA295-98 高碳耐磨轴承钢技术规范Standard Specification for High-Carbon Anti-Friction Bearing SteelA297/A297M-97(2003) 一般用耐热铬铁与镍铬铁合金钢铸件规格Standard Specification for Steel Castings,Iron-Chromium and Iron-Chromium-Nickel, HeatResistant, for General ApplicationA299/A299M-04 压力容器用锰硅碳钢板Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-SiliconA302/A302M-03 压力容器用锰钼和锰钼镍合金钢板Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-NickelA304-04 有末端淬火淬透性要求的合金钢棒材的技术规范Standard Specification for Carbon and AlloySteel Bars Subject to End-Quench HardenabilityRequirementsA307-04 抗拉强度为60000psi的碳素钢螺栓和螺柱的技术规范Standard Specification for Carbon Steel Boltsand Studs, 60 000 PSI Tensile StrengthA308/A308M-03 经热浸处理镀有铅锡合金的薄板材的技术规范Standard Specification for Steel Sheet, Terne(Lead-Tin Alloy) Coated by the Hot-Dip ProcessA309-01 用三点试验法测定长镀锌薄钢板镀层的重量成分的试验方法Standard Test Method for Weight and Compositionof Coating on Terne Sheet by the Triple-Spot TestA311/A311M-04 有机械性能要求的消除应力的冷拉碳素钢棒Standard Specification for Cold-Drawn,Stress-Relieved Carbon Steel Bars Subject toMechanical Property RequirementsA312/A312M-04a 无缝和焊接奥氏体不锈钢管Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel PipesA313/A313M-不锈钢弹簧丝技术规范Standard Specification for Stainless Steel03 Spring WireA314-97(2002) 锻造用不锈及耐热钢坯及钢棒规格Standard Specification for Stainless Steel Billets and Bars for ForgingA319-71(2001) 高温无压部件用灰铁铸件Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing PartsA320/A320M-04 低温用合金钢螺栓材料规格Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature ServiceA321-90(2001) 经淬火和回火的碳素钢棒Standard Specification for Steel Bars, Carbon, Quenched and TemperedA322-91(2001)e1 合金钢棒材.级别Standard Specification for Steel Bars, Alloy, Standard GradesA323-93(2000) 硼铁规格Standard Specification for FerroboronA324-73(2000) 钛铁合金Standard Specification for FerrotitaniumA325-04a 经热处理最小抗拉强度为120/105ksi的热处理钢结构螺栓Standard Specification for Structural Bolts,Steel, Heat Treated, 120/105 ksi Minimum TensileStrengthA325M-04a 经热处理最小抗拉强度为830Mpa的热处理钢结构螺栓Standard Specification for Structural Bolts,Steel, Heat Treated 830 Mpa Minimum TensileStrength [Metric]A327-91(1997) 铸铁冲击试验方法Standard Test Methods for Impact Testing of Cast IronsA327M-91(1997) 铸铁冲击试验方法(米制) Standard Test Methods for Impact Testing of Cast Irons (Metric)A328/A328M-03 薄钢板桩Standard Specification for Steel Sheet PilingA333/A333M-04a 低温用无缝与焊接钢管规格Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature ServiceA334/A334M-04a 低温设备用无缝与焊接碳素和合金钢管Standard Specification for Seamless and WeldedCarbon and Alloy-Steel Tubes forLow-Temperature ServiceA335/A335M-03 高温用无缝铁素体合金钢管Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature ServiceA336/A336M-03a 压力与高温部件用合金钢锻件规格Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature PartsA338-84(200 4) 铁路,船舶和其他重型装备在温度达到650华氏度(345摄氏度)时使用的可锻铸铁法兰,管件和阀门零件Standard Specification for Malleable IronFlanges, Pipe Fittings, and Valve Parts forRailroad, Marine, and Other Heavy Duty Serviceat Temperatures Up to 650°F (345°C)A340-03a 有关磁性试验用符号和定义的术语Standard Terminology of Symbols and Definitions Relating to Magnetic TestingA341/A341M-00 用直流磁导计和冲击试验法测定材料的直流磁性能的试验方法Standard Test Method for Direct Current MagneticProperties of Materials Using D-C Permeametersand the Ballistic Test MethodsA342/A342M-99 磁铁材料导磁率的试验方法Standard Test Methods for Permeability of Feebly Magnetic MaterialsA343/A343M-03 在电力频率下用瓦特计-安培计-伏特计法(100-1000赫兹)和25 厘米艾普斯亭(EPSTEIN) 机架测定材料的交流电磁性能的试验方法Standard Test Method for Alternating-CurrentMagnetic Properties of Materials at PowerFrequencies Using Wattmeter-Ammeter-VoltmeterMethod and 25-cm Epstein Test FrameA345-98 磁设备用平轧电炉钢Standard Specification for Flat-Rolled Electrical Steels for Magnetic ApplicationsA348/A348M-00 用瓦特计--安培计--伏特计法(100-10000赫兹)和25厘米艾普斯亭框测定材料的交流磁性能的试验方法Standard Test Method for Alternating CurrentMagnetic Properties of Materials Using theWattmeter-Ammeter-Voltmeter Method, 100 to 10000 Hz and 25-cm Epstein FrameA350/A350M-04 要求进行缺口韧性试验的管道部件用碳素钢与低合金钢锻件技术规范Standard Specification for Carbon and Low-AlloySteel Forgings, Requiring Notch ToughnessTesting for Piping ComponentsA351/A351M-03 容压零件用奥氏体及奥氏体铁素体铸铁的技术规范Standard Specification for Castings,Austenitic, Austenitic-Ferritic (Duplex), forPressure-Containing PartsA352/A352M-03 低温受压零件用铁素体和马氏体钢铸件规格Standard Specification for Steel Castings,Ferritic and Martensitic, forPressure-Containing Parts, Suitable forLow-Temperature ServiceA353/A353M-93(1999) 压力容器用经二次正火及回火处理的含9％镍的合金钢板Standard Specification for Pressure VesselPlates, Alloy Steel, 9 Percent Nickel,Double-Normalized and TemperedA354-04 淬火与回火合金钢螺栓,双头螺栓及其他外螺纹紧固件规格Standard Specification for Quenched andTempered Alloy Steel Bolts, Studs, and OtherExternally Threaded FastenersA355-89(2000) 渗氮用合金钢棒Standard Specification for Steel Bars, Alloys, for NitridingA356/A356M-98(2003) 蒸汽轮机用厚壁碳素钢、低合金钢和不锈钢铸件Standard Specification for Steel Castings,Carbon, Low Alloy, and Stainless Steel,Heavy-Walled for Steam TurbinesA358/A358M-04 高温用电熔焊奥氏体铬镍合金钢管Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General ApplicationsA363-03 地面架空线用镀锌钢丝绳Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire StrandA367-60(199铸铁的激冷试验方法Standard Test Methods of Chill Testing of Cast9) IronA368-95a(2000) 不锈钢和耐热钢丝绳的标准Standard Specification for Stainless Steel Wire StrandA369/A369M-02 高温用锻制和镗孔碳素钢管和铁素体合金钢管Standard Specification for Carbon and FerriticAlloy Steel Forged and Bored Pipe forHigh-Temperature ServiceA370-03a 钢制品机械测试的标准试验方法和定义Standard Test Methods and Definitions forMechanical Testing of Steel ProductsA372/A372M-03 薄壁压力容器用碳素钢及合金钢锻件Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure VesselsA376/A376M-02a 高温中心站用无缝奥氏钢管Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station ServiceA377-03 球墨铸铁压力管规范索引Standard Index of Specifications for Ductile-Iron Pressure PipeA380-99e1 不锈钢零件、设备和系统的清洗和除垢Standard Practice for Cleaning, Descaling, andPassivation of Stainless Steel Parts,Equipment, and SystemsA381-96(2001) 高压输送用金属弧焊钢管Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission SystemsA384/A384M-02 防止钢组件热浸镀锌时翘曲和扭曲用安全保护Standard Practice for Safeguarding AgainstWarpage and Distortion During Hot-DipGalvanizing of Steel AssembliesA385-03 提供高质量镀锌覆层(热浸) Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)A387/A387M-03 压力容器用铬钼合金钢板Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-MolybdenumA388/A388M-03 重型钢锻件超声波检测Standard Practice for Ultrasonic Examination of Heavy Steel ForgingsA389/A389M-03 适合高温受压部件用经特殊热处理的合金钢铸件规格Standard Specification for Steel Castings,Alloy, Specially Heat-Treated, forPressure-Containing Parts, Suitable forHigh-Temperature ServiceA390-95(200 1) 饲养家禽用镀锌钢丝栏栅网(六角形和直线形)Standard Specification for Zinc-Coated(Galvanized) Steel Poultry Fence Fabric(Hexagonal and Straight Line)A391/A391M-01 80号合金钢链条Standard Specification for Grade 80 Alloy Steel ChainA392-03 镀锌钢丝链环栏栅网Standard Specification for Zinc-Coated Steel Chain-Link Fence FabricA394-04 传动塔架用镀锌和裸露钢螺栓Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and BareA395/A395M-99e1 高温用铁素体球墨铸铁受压铸件Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated TemperaturesA400-69(2000) 钢棒的成分及机械性能选择指南Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical PropertiesA401/A401M-03 铬硅合金钢丝Standard Specification for Steel Wire, Chromium-Silicon AlloyA403/A403M-04 锻制奥氏体不锈钢管配件Standard Specification for Wrought Austenitic Stainless Steel Piping FittingsA407-93(2004) 盘簧用冷拉钢丝Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type SpringsA409/A409M-01 腐蚀场所或高温下使用的焊接大口径奥氏体钢管Standard Specification for Welded LargeDiameter Austenitic Steel Pipe for Corrosive orHigh-Temperature ServiceA411-03 镀锌低碳钢铠装线Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor WireA413/A413M-01 碳素钢链Standard Specification for Carbon Steel ChainA414/A414M-04 压力容器用碳素薄钢板Standard Specification for Steel, Sheet, Carbon, for Pressure VesselsA416/A416M-02 预应力混凝土用无涂层七股钢铰线Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed ConcreteA417-93(200 4) 之字形、方形、正弦形家具用弹簧元件用冷拔钢丝Standard Specification for Steel Wire,Cold-Drawn, for Zig-Zag, Square-Formed, andSinuous-Type Upholstery Spring UnitsA418-99(200 3) 涡轮机及发电机钢转子锻件的超声波检查方法Standard Test Method for Ultrasonic Examinationof Turbine and Generator Steel Rotor ForgingsA420/A420M-04 低温下用锻制碳素钢和合金钢管配件Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature ServiceA421/A421M-02 预应力混凝土用无涂层消除应力钢丝的技术规范Standard Specification for UncoatedStress-Relieved Steel Wire for PrestressedConcreteA423/A423M-95(2000) 无缝和电焊低合金钢管Standard Specification for Seamless and Electric-Welded Low-Alloy Steel TubesA424-00 搪瓷用钢薄板Standard Specification for Steel, Sheet, for Porcelain EnamelingA426/A426M-02 高温用离心铸造的铁素体合金钢管Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature ServiceA427-02 冷轧和热轧用锻制合金钢辊Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot ReductionA428/A428M-01 钢铁制品上铝覆层重量的测试方法Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or SteelArticlesA434-04 热轧与冷精轧经回火及淬火的合金钢棒Standard Specification for Steel Bars, Alloy,Hot-Wrought or Cold-Finished, Quenched andTemperedA435/A435M-90(2001) 钢板的直射束纵向超声波检验Standard Specification for Straight-Beam Ultrasonic Examination of Steel PlatesA436-84(2001) 奥氏体灰口铁铸件Standard Specification for Austenitic Gray Iron CastingsA437/A437M-01a 高温用经特殊处理的涡轮型合金钢螺栓材料Standard Specification for Alloy-SteelTurbine-Type Bolting Material Specially HeatTreated for High-Temperature ServiceA439-83(1999) 奥氏体可锻铸铁铸件Standard Specification for Austenitic Ductile Iron CastingsA447/A447M-93(2003) 高温用镍铬铁合金钢铸件(25-12级) Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature ServiceA449-04a 经淬火和回火的钢螺栓和螺柱Standard Specification for Quenched and Tempered Steel Bolts and StudsA450/A450M-04 碳素钢管、铁素体合金钢管及奥氏体合金钢管Standard Specification for General Requirementsfor Carbon, Ferritic Alloy, and Austenitic AlloySteel TubesA451/A451M-02 高温用离心铸造的奥氏体钢管Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature ServiceA453/A453M-03 具有同奥氏体钢相类似的膨胀系数、屈服强度为50-120Ksi(345-827MPa)的耐高温螺栓材料Standard Specification for High-TemperatureBolting Materials, with Expansion CoefficientsComparable to Austenitic Stainless SteelsA455/A455M-03 压力容器用高强度碳锰钢板Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength ManganeseA456/A456M-99(2003) 大型曲轴锻件的磁粉检查Standard Specification for Magnetic Particle Examination of Large Crankshaft ForgingsA459-97(2003) 镀锌平轧扁钢铠装带Standard Specification for Zinc-Coated Flat Steel Armoring TapeA460-94(2004)e1 包铜钢丝绳标准Standard Specification for Copper-Clad Steel Wire StrandA463/A463M-02a 热浸镀铝薄钢板Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip ProcessA466/A466M-01 非焊接碳素钢链Standard Specification for Weldless ChainA467/A467M-01 机器链和盘旋链Standard Specification for Machine and Coil ChainA469-04 用于发电机转子的真空处理钢锻件Standard Specification for Vacuum-Treated Steel Forgings for Generator RotorsA470-03 涡轮机转子和轴用经真空处理的碳素钢和合金锻件Carbon and Alloy Steel Forgings for TurbineRotors and ShaftsA471-02 涡轮转子转盘和转轮用真空处理合金钢锻件技术规范Standard Specification for Vacuum-Treated AlloySteel Forgings for Turbine Rotor Disks andWheelsA472-98(200 3) 蒸汽涡轮机轴及转子锻件的热稳定性的试验方法Standard Test Method for Heat Stability of SteamTurbine Shafts and Rotor ForgingsA473-01 不锈和耐热钢锻件Standard Specification for Stainless Steel ForgingsA474-03 包铝钢丝绳标准Standard Specification for Aluminum-Coated Steel Wire StrandA475-03 镀锌钢丝绳Standard Specification for Zinc-Coated Steel Wire StrandA476/A476M-00 造纸厂干燥辊用球墨可锻铸铁件Standard Specification for Ductile Iron Castings for Paper Mill Dryer RollsA478-97(2002) 铬镍不锈钢和耐热钢制编织钢丝Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting WireA479/A479M-04 锅炉及压力容器用不锈钢和耐热钢棒与型材Standard Specification for Stainless Steel Barsand Shapes for Use in Boilers and Other PressureVesselsA480/A480M-04 扁平轧制耐热不锈钢厚板材、薄板材和带材通用要求Standard Specification for General Requirementsfor Flat-Rolled Stainless and Heat-ResistingSteel Plate, Sheet, and StripA481-94(2000) 金属铬Standard Specification for Chromium MetalA482-93(2000) 铬铁硅Standard Specification for Ferrochrome-Silicon A483-64(2000) 硅锰合金Standard Specification for SilicomanganeseA484/A484M-03a 不锈及耐热锻钢棒,钢坯及锻件的规格Standard Specification for General Requirementsfor Stainless Steel Bars, Billets, and ForgingsA485-03 高淬透性耐磨轴承钢的技术规范Standard Specification for High Hardenability Antifriction Bearing SteelA487/A487M-93(1998) 受压钢铸件Standard Specification for Steel Castings Suitable for Pressure ServiceA488/A488M-01e1 钢铸件焊接规程和工作人员的合格鉴定Standard Practice for Steel Castings, Welding,Qualifications of Procedures and PersonnelA489-04 碳素钢吊耳Standard Specification for Carbon Steel Lifting EyesA490M-04a 最小拉伸强度为150千磅/平方英寸热处理钢结构螺栓Standard Specification for Structural Bolts,Alloy Steel, Heat Treated, 150 ksi MinimumTensile StrengthA490-04a 最小拉伸强度为150千磅/平方英寸热处理钢结构螺栓Bolts, Classes 10.9 and 10.9.3, for StructuralSteel Joints [Metric]A491-03 镀铝钢链环栏栅结构Standard Specification for Aluminum-Coated Steel Chain-Link Fence FabricA492-95(2000) 耐热不锈钢丝绳Standard Specification for Stainless Steel Rope WireA493-95(2000) 冷镦和冷锻不锈钢和耐热钢丝Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold ForgingA494/A494M-03ae1 镍和镍合金铸件Standard Specification for Castings, Nickel and Nickel AlloyA495-94(2000) 硅钙合金钢技术规范Standard Specification for Calcium-Silicon AlloysA496-02 钢筋混凝土用变形钢丝Standard Specification for Steel Wire, Deformed, for Concrete ReinforcementA497/A497M-02 钢筋混凝土用焊接变形钢丝网Standard Specification for Steel Welded Wire Reinforcement, Deformed, for ConcreteA498-04 无缝与焊接碳素钢,铁素体钢与奥氏体钢制有整体散热片的换热器钢管Standard Specification for Seamless and WeldedCarbon Steel Heat-Exchanger Tubes with IntegralFinsA499-89(200 2) 轧制丁字钢轨用的碳素钢棒材及型材的技术规范Standard Specification for Steel Bars andShapes, Carbon Rolled from T RailsA500-03a 圆形与异型焊接与无缝碳素钢结构管Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and ShapesA501-01 热成型焊接与无缝碳素钢结构管Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural TubingA502-03 结构钢铆钉规范Standard Specification for Rivets, Steel, StructuralA503/A503M-01(2001)e1 锻制大型曲轴的超声波检验Standard Specification for Ultrasonic Examination of Forged CrankshaftsA504-04e1 锻制碳素钢轮Standard Specification for Wrought Carbon Steel WheelsA505-00 热轧和冷轧合金钢薄板和带材Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements forA506-04 正规质量及优质结构的热轧和冷轧合金钢薄板与带材Standard Specification for Alloy and StructuralAlloy Steel, Sheet and Strip, Hot-Rolled andCold-RolledA507-04 优质拉拔,热轧和冷轧合金钢薄板与带材Standard Specification for Drawing Alloy Steel,Sheet and Strip, Hot-Rolled and Cold-RolledA508/A508M-04b 压力容器用经回火和淬火真空处理的碳素钢与合金钢锻件Standard Specification for Quenched andTempered Vacuum-Treated Carbon and Alloy SteelForgings for Pressure Vessels。
ASTM A192 A192M-02《高压用碳素钢无缝锅炉管》技术要点
ASTM A192/A192M-02《高压用碳素钢无缝锅炉管》 1 适用范围 本标准适用于高压用最小壁厚碳素钢无缝锅炉管和过热器管。
2 一般要求 按本标准供应的钢管，除另有规定者外，应符合ASTM A450/A450M标准现行版中各项适用要求3 化学成分（%）C Mn Si P S0.06~0.18 0.27~0.63 ≤0.25 ≤0.035 ≤0.035注：不允许提供添加上述元素以外的特殊要求的合金牌号4 制造工艺 采用无缝钢管生产工艺，按规定可为热轧钢管，也可为冷拔钢管。
5 热处理 热轧钢管不需要进行热处理，冷拔钢管在最后一道冷拔之后在650℃或更高温度下进行热处理6 硬度要求 壁厚≥5.1mm时 布氏硬度≤137HB 壁厚＜5.1mm时 洛氏硬度≤77HRB7 压扁试验 法按ASTM A450/A450M标准要求，取样要求为每批或其剩余部分中选取两根钢管，从钢管每端取样各作一次试验。
注：【D≤3in.（76.2mm）一批由未切分的250根钢管组成；D＞3in.（76.2mm）一批由未切分的100根钢管组成。
】8 扩口试验 方法按ASTM A450/A450M标准要求，取样要求为每批或其剩余部分中选取两根钢管，从钢管每端取样各作一次试验。
注：【D≤3in.（76.2mm）一批由未切分的250根钢管组成；D＞3in.（76.2mm）一批由未切分的100根钢管组成。
】9 硬度试验 方法按ASTM A450/A450M标准要求，每批取两根钢管，再从钢管上取试样进行试验。
（所谓批，指的是用同一炉钢生产的同一公称直径和壁厚的未经切分的全部钢管。
若为批式炉，则批仅指同一炉号、同一尺寸、同一次装炉热处理的钢管；若为连续炉，则批应包括同一炉号、同一尺寸并在同一热处理炉内以相同温度、相同加热时间和相同炉子速度进行热处理的全部钢管。
）10 水压试验 逐根水压，如需方指定，也可使用无损检验代替水压试验。
11 标志 除ASTM A450 /A450M标准规定外，还应包括热轧钢管或冷拔钢管的标志。
中美欧日锅钢对照
中、美、欧、日锅炉钢管对照表序号组成成分Composition 中国China（1）美国USA（2）欧洲European（3）日本Japan（17）1 低碳钢 GB3087 10GB5310 12G ASME SA192EN10216-1 P195 TR1（4）<1.0107>或TR2<1.0108>EN10216-2 P195 GH<1.0348>2 低碳钢 GB3087 20 SA178A SA53 SA179 EN10216-1 P235 TR1<1.0254>或TR2<1.0255>P265 TR1 <1.0258>或TR2<1.0259>EN10216-2 P235GH<1.0345> P265GH<1.0425>JIS G3461 STB3403 低碳钢 GB5310 20G EN10216-2 P265GH G3456 STP370 G3461 STB4104 碳锰钢 GB5310 20MnG SA106B SA178C SA210A-1 EN10216-2 P265GH G3456 STP4105 碳锰钢 GB5310 25MnG SA106CSA178D SA210CEN10216-2 20MnNb6<1.0471> G3456 TP480G3461 STB5106 碳钼 15MoG20MoGSA209T1 SA335P1SA209T1a16Mo3<1.5415> 16Mo5<1.5423> G3462 STBA12 STBA13G3458 STPA127 锰钼镍 SA302C（Code Case 2440）（5） G3119 SBY628 0.5铬0.5钼 SA213-T2 SA335-P2 G3462 STBA20 G3458 STPA209 1铬0.5钼 GB5310 15CrMoG SA213-T11 SA213-T12SA335-P11 SA335-P12EN10216-2 13CrMo4-5<1.7335> G3458 STPA23 STPA22G3462 STBA23 STBA2210 1铬0.5钼钒 GB5310 12Cr1MoVG11 2.25铬1钼 GB5310 12Cr2MoG SA213-T22 SA335-P22 EN10216-2 10CrMo910<1.7380> G3462 STBA24 G3458 STPA2412 2铬0.5钼钨钒钛硼 GB5310 12Cr2MoWVTiB13 3铬1钼钒硅钛硼 GB531012Cr3MoVSiTiB14 镍铜钼铌 09NiMnMoNbCu Code Case 2353（6） EN10216-2 15NiCuMoNb5-6-4<1.6368>15 2.5铬1.5钨钼钒钼 07Cr2MoW2VNbB SA213-T23（7） EN10216-2 7CrWVNb9-6 火STBA24J1（住友HCM2S）16 2.5铬1钼钒钛硼 08Cr2Mo1VTiB （SA213-T24）（8） EN10216-2 7CrMoVTiB10-10<1.7378>17 9铬1钼钒铌 GB5310 10Cr9Mo1VNb SA213-T91SA335-P91（9）X10CrMoVNb9-1<1.4903> 火STBA28火STPA2818 9铬1.5钨钼钒铌 10Cr9MoW2VNbBN SA213-T92 SA335-P92（10） EN10216-2 X10CrWMoVNb9-2<1.4901> 火STBA29火STPA29（新日铁NF616）19 9铬1钼钨钒铌 11Cr9Mo1W1VNbBN SA213-T911SA335-P911（11）EN10216-2 X11CrMoWVNb9-1-1（E911）<1.4905>20 11铬1钼钒 EN10216-2 X20GrMoV11-1<1.4922>21 12铬2钨1铜钼钒铌 10Cr11MoW2VNbBN SA213-T122（12）SA335-P122VM12<1.9994模仿标出>X10GrCoWMoVNbNB12-1.5-1.5火SUS410J3TB火SUS410J3TP（住友HCM12A）22 18铬9镍 GB5310 15Cr18Ni9 SA213-TP304H EN10216-5 X6CrNi18-10<1.4948> G3463 SUS304HTB23 19铬10镍铌 GB5310 07Cr18Ni11Nb08Cr18Ni11NbSA213-TP347HSA213-TP347EN10216-5 X7CrNiNb18-10<1.4912> G3463 SUS347HTB24 18铬10镍钛 SA213-TP321H EN10216-5 X7CrNiTi18-10<1.4940> G3463 SUS321HTBG3459 SUS321HTP25 细晶19铬10镍铌 08Cr18Ni11NbFG SA213-TP347HFG（13） DMV347HFG（16）VdTÜV547<1.4550>26 17铬13镍2钼 SA213-TP316H EN10216-5 X6CrNiMo17-13-2<1.4918>X6CrNiMoTi17-12-2<1.4571>G3459 SUS316HTB27 18铬9镍3铜铌氮 10Cr18Ni9NbCu3BN SA213-Super304（14）DMV304HCu VdTÜV550<1.9922模仿标出> 火SUS304J1HTB28 25铬20镍铌氮 07Cr25Ni21NbN SA213-TP310HCbN（15）DMV310N VdTÜV546<1.9911模仿标出> 火SUS310J1TB（住金HR3C）29 18铬9镍2钨钒铌氮日本新日铁 XA704 Code Case 2475（TP347W）火SUS347J1TB30 20铬25镍1.5钼铌氮日本新日铁 NF709 火SUS310J2TB31 23铬20镍1.5钨3.5铜铌氮日本住友 SAVE25 火SUS309J2TB32 18铬10镍—钛铌日本NKK Tempaloy A-1 火SUS321J1HTB33 18铬10镍3铜钛铌日本NKK Tempaloy AA1（shot blasted）火SUS321J2HTB，C.C.251234 22铬15镍铌氮日本NKK Tempaloy A3 火SUS309J4HTB注：（1）GB3087 低中压锅炉用无缝钢管；GB5310 高压锅炉用无缝钢管。