JASO C405
不锈钢牌号对照表
不锈钢牌号对照表
精选文档，供参考！
精选文档，供参考！
精选文档，供参考！
精选文档，供参考！
精选文档，供参考！
世界金属牌号对照表碳素结构钢
精选文档，供参考！
精选文档，供参考！
［返回］
优质碳素结构钢
精选文档，供参考！
精选文档，供参考！
精选文档，供参考！
精选文档，供参考！
精选文档，供参考！
精选文档，供参考！
［返回］
碳素工具钢
精选文档，供参考！
精选文档，供参考！
［返回］
合金结构钢
精选文档，供参考！
精选文档，供参考！
精选文档，供参考！
精选文档，供参考！
精选文档，供参考！
精选文档，供参考！
精选文档，供参考！
［返回］
淬透性合金结构钢
精选文档，供参考！
精选文档，供参考！
［返回］
精选文档，供参考！
弹簧钢
精选文档，供参考！
［返回］
滚动轴承钢
精选文档，供参考！
［返回］
高速工具钢
精选文档，供参考！
精选文档，供参考！
［返回］
不锈耐酸钢
精选文档，供参考！
精选文档，供参考！
精选文档，供参考！
精选文档，供参考！
［返回］
耐热钢
精选文档，供参考！
精选文档，供参考！
［返回］
精选文档，供参考！
易切结构钢
精选文档，供参考！
合金工具钢
精选文档，供参考！
精选文档，供参考！
精选文档，供参考！
（此文档部分内容来源于网络，如有侵权请告知删除，文档可自行编辑修改内容，供参考，感谢您的支持）
精选文档，供参考！。
美国安全数据表300000004267页：1-冷热剂EP-636硬化剂产品说明书
USA SAFETY DATA SHEET3000000042671. CHEMICAL PRODUCT AND COMPANY IDENTIFICATIONProduct name: CoolTherm EP-636 HARDENER Product Use/Class: Encapsulant, Part BReference: Our thermal management products are now named CoolTherm (Registered Trademark). Some of our Gelease, Circalok and Thermoset products are included under this new brand.LORD Corporation 111 LORD DriveCary, NC 27511-7923 USATelephone: 814 868-3180Non-Transportation Emergency: 814 763-2345 Chemtrec 24 Hr Transportation Emergency No.800 424-9300 (Outside Continental U.S. 703 527-3887)EFFECTIVE DATE: 03/05/20182. HAZARDS IDENTIFICATIONGHS CLASSIFICATION:Acute toxicity OralCategory 4Acute toxicity Dermal Category 3 - 94.6% of the mixture consists of ingredient(s) of unknown toxicity. Skin corrosion/irritation Category 2Serious eye damage/eye irritation Category 1 Skin sensitization Category 1 Carcinogenicity Category 2Specific target organ systemic toxicity (repeated exposure) Category 2 LiverGHS LABEL ELEMENTS:Symbol(s)Signal WordD ANGERHazard StatementsHarmful if swallowed. Toxic in contact with skin. Causes skin irritation.Causes serious eye damage.May cause an allergic skin reaction. Suspected of causing cancer.May cause damage to organs through prolonged or repeated exposure.(Liver)Precautionary Statements PreventionObtain special instructions before use.Do not handle until all safety precautions have been read and understood. Wear protective gloves/protective clothing/eye protection/face protection. Use personal protective equipment as required. Do not breathe dust/fume/gas/mist/vapors/spray. Wash thoroughly after handling.Do not eat, drink or smoke when using this product.Contaminated work clothing should not be allowed out of the workplace.ResponseImmediately call a POISON CENTER or doctor/physician.Specific treatment (see supplemental first aid instructions on this label).IF ON SKIN: Wash with plenty of soap and water.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.Continue rinsing.Rinse mouth.Remove/Take off immediately all contaminated clothing.Wash contaminated clothing before reuse.StorageStore locked up.Disposal:Dispose of contents/container in accordance with waste/disposal laws and regulations of your country or particular locality.Other Hazards:This product contains component(s) which have the following warnings; however based on the GHS classification criteria of your country or locale, the product mixture may be outside the respective category(s).Acute: Dermal absorption possible. May cause respiratory tract irritation. Inhaled corrosive substances can lead to a toxic edema of the lungs. May cause allergic respiratory reaction.Chronic: IARC has designated carbon black as Group 2B - inadequate evidence for carcinogenicity in humans, but sufficient evidence in experimental animals. In 2006 IARC reaffirmed its 1995 finding that there is "inadequateevidence" from human health studies to assess whether carbon black causes cancer in humans. Further,epidemiological evidence from well-conducted investigations has shown no causative link between carbon blackexposure and the risk of malignant or non-malignant respiratory disease in humans.3. COMPOSITION/INFORMATION ON INGREDIENTSChemical Name CAS Number RangeImidazole PROPRIETARY90 - 95%4-Methylimidazole822-36-6 1 - 5%Carbon black1333-86-40.1 - 0.9%Any "PROPRIETARY" component(s) in the above table is considered trade secret, thus the specific chemical and its exact concentration is being withheld.4. FIRST AID MEASURESFIRST AID - EYE CONTACT: Flush eyes immediately with large amount of water for at least 15 minutes holding eyelids open while flushing. Get prompt medical attention.FIRST AID - SKIN CONTACT: Flush contaminated skin with large amounts of water while removing contaminated clothing. Wash affected skin areas with soap and water. Get medical attention if symptoms occur.FIRST AID - INHALATION: Move person to fresh air. Restore and support continued breathing. If breathing is difficult, give oxygen. Get immediate medical attention.FIRST AID - INGESTION: If swallowed, do not induce vomiting. Call a physician or poison control center immediately for further instructions. Never give anything by mouth if victim is rapidly losing consciousness, unconscious or convulsing.5. FIRE-FIGHTING MEASURESSUITABLE EXTINGUISHING MEDIA: Carbon Dioxide, Dry Chemical, Foam, Water FogUNSUITABLE EXTINGUISHING MEDIA: Not determined for this product.SPECIFIC HAZARDS POSSIBLY ARISING FROM THE CHEMICAL: Keep containers tightly closed. Closed containers may rupture when exposed to extreme heat. Use water spray to keep fire exposed containers cool. During a fire, irritating and/or toxic gases and particulate may be generated by thermal decomposition or combustion.SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIRE-FIGHTERS: Wear full firefighting protective clothing, including self-contained breathing apparatus (SCBA). If water is used, fog nozzles are preferable.6. ACCIDENTAL RELEASE MEASURESPERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT, AND EMERGENCY PROCEDURES: Avoid contact. Avoid breathing vapors. Use self-contained breathing equipment.ENVIRONMENTAL PRECAUTIONS: Do not contaminate bodies of water, waterways, or ditches, with chemical or used container.METHODS AND MATERIALS FOR CONTAINMENT AND CLEANUP: Keep non-essential personnel a safe distance away from the spill area. Notify appropriate authorities if necessary. Avoid contact. Before attempting cleanup, refer to hazard caution information in other sections of the SDS form. Scoop spilled material into an appropriate container for proper disposal. (If necessary, use inert absorbent material to aid in containing the spill).7. HANDLING AND STORAGEHANDLING: Keep closure tight and container upright to prevent leakage. Avoid skin and eye contact. Wash thoroughly after handling. Avoid breathing of vapor or spray mists. Do not handle until all safety precautions have been read and understood. Empty containers should not be re-used. Use with adequate ventilation.STORAGE: Store only in well-ventilated areas. Keep container closed when not in use.INCOMPATIBILITY: Strong acids, bases, and strong oxidizers.; Peroxides and oxidizing agents.; Reaction of the imidazole in this product with peroxides may result in violent decomposition of peroxide possibly creating an explosion.8. EXPOSURE CONTROLS/PERSONAL PROTECTIONCOMPONENT EXPOSURE LIMITChemical Name ACGIH TLV-TWA ACGIH TLV-STELOSHA PEL-TWAOSHA PEL-CEILINGSkinImidazole N.E.N.E.N.E. N.E.N.A.4-Methylimidazole N.E.N.E.N.E. N.E.N.A.Carbon black 3 mg/m3N.E. 3.5 mg/m3 N.E.N.A.N.A. - Not Applicable, N.E. - Not Established, S - Skin DesignationEngineering controls: Sufficient ventilation in pattern and volume should be provided in order to maintain air contaminant levels below recommended exposure limits.PERSONAL PROTECTION MEASURES/EQUIPMENT:RESPIRATORY PROTECTION: Use a NIOSH approved air-purifying organic vapor respirator if occupational limits are exceeded. For emergency situations, confined space use, or other conditions where exposure limits may be greatly exceeded, use an approved air-supplied respirator. For respirator use observe OSHA regulations (29CFR1910.134) or use in accordance with applicable laws and regulations of your country or particular locality.SKIN PROTECTION: Use neoprene, nitrile, or rubber gloves to prevent skin contact.EYE PROTECTION: Use safety eyewear including safety glasses with side shields and chemical goggles where splashing may occur.OTHER PROTECTIVE EQUIPMENT: Remove and wash contaminated clothing before reuse.HYGIENIC PRACTICES: Wash hands before eating, smoking, or using toilet facility. Food or beverages should not be consumed anywhere this product is handled or stored. Wash thoroughly after handling.9. PHYSICAL AND CHEMICAL PROPERTIESTypical values, not to be used for specification purposes.ODOR: Ammonia VAPOR PRESSURE: N.D.APPEARANCE: Black VAPOR DENSITY: Heavier than Air PHYSICAL STATE: Liquid LOWER EXPLOSIVE LIMIT: Not ApplicableUPPER EXPLOSIVE LIMIT: Not ApplicableFLASH POINT:≥ 201 °F, 93 °CSetaflash Closed CupBOILING RANGE: N.A.EVAPORATION RATE: Slower than n-butyl-acetate AUTOIGNITION TEMPERATURE:N.D.DENSITY: 0.99 g/cm3 - 8.27 lb/gal DECOMPOSITION TEMPERATURE:N.D. VISCOSITY, DYNAMIC: N.D.ODOR THRESHOLD: N.D.VISCOSITY, KINEMATIC: N.D.SOLUBILITY IN H2O: Partially Soluble VOLATILE BY WEIGHT: 0.00 %pH: N.A.VOLATILE BY VOLUME: 0.00 %FREEZE POINT: N.D. VOC CALCULATED: 0 lb/gal, 0 g/lN.D.COEFFICIENT OF WATER/OILDISTRIBUTION:LEGEND: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined10. STABILITY AND REACTIVITYHAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur under normal conditions. STABILITY: Product is stable under normal storage conditions.CONDITIONS TO AVOID: High temperatures.INCOMPATIBILITY: Strong acids, bases, and strong oxidizers.; Peroxides and oxidizing agents.; Reaction of the imidazole in this product with peroxides may result in violent decomposition of peroxide possibly creating an explosion. HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide, oxides of nitrogen11. TOXICOLOGICAL INFORMATIONEXPOSURE PATH: Refer to section 2 of this SDS.SYMPTOMS:Refer to section 2 of this SDS.TOXICITY MEASURES:Chemical Name LD50/LC50Imidazole N.D.4-Methylimidazole Oral LD50: Rat751 mg/kgDermal LD50: Rabbit440 mg/kgCarbon black Oral LD50: Rat> 15,400 mg/kgDermal LD50: Rabbit> 3 g/kgGHS LC50 (vapour): Acute toxicity point estimate55 mg/lGerm cell mutagenicity: No classification proposedCarcinogenicity: Category 2 - Suspected of causing cancer.Components contributing to classification: 4-Methylimidazole.Reproductive toxicity: No classification proposed12. ECOLOGICAL INFORMATIONECOTOXICITY:Chemical Name EcotoxicityImidazole N.D.4-Methylimidazole Invertebrates: Daphnia magna180 mg/l48 hPlants: Desmodesmus subspicatus2 mg/l72 hCarbon black N.D.PERSISTENCE AND DEGRADABILITY:Not determined for this product.BIOACCUMULATIVE: Not determined for this product.MOBILITY IN SOIL: Not determined for this product.OTHER ADVERSE EFFECTS: Not determined for this product.13. DISPOSAL CONSIDERATIONSDISPOSAL METHOD: Disposal should be done in accordance with Federal (40CFR Part 261), state and local environmental control regulations. If waste is determined to be hazardous, use licensed hazardous waste transporter and disposal facility.14. TRANSPORT INFORMATIONUS DOT RoadDOT Proper Shipping Name: Amines, liquid, corrosive, n.o.s.DOT Hazard Class: 8SECONDARY HAZARD: NoneDOT UN/NA Number: 2735Packing Group: IIIEmergency Response Guide Number: 153IATA CargoPROPER SHIPPING NAME: Amines, liquid, corrosive, n.o.s.DOT Hazard Class: 8HAZARD CLASS: NoneUN-NUMBER: 2735PACKING GROUP: IIIEMS: 8LIMDGPROPER SHIPPING NAME: Amines, liquid, corrosive, n.o.s.DOT Hazard Class: 8HAZARD CLASS: NoneUN-NUMBER: 2735PACKING GROUP: IIIEMS: F-AThe listed transportation classification applies to non-bulk shipments. It does not address regulatory variations due to changes in package size, mode of shipment or other regulatory descriptors. For the most accurate shipping information, refer to your transportation/compliance department.15. REGULATORY INFORMATIONU.S. FEDERAL REGULATIONS: AS FOLLOWS:SARA SECTION 313This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372.:NoneTOXIC SUBSTANCES CONTROL ACT:INVENTORY STATUSThe chemical substances in this product are on the TSCA Section 8 Inventory.EXPORT NOTIFICATIONThis product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported from the United States:None16. OTHER INFORMATIONUnder HazCom 2012 it is optional to continue using the HMIS rating system. It is important to ensure employees have been trained to recognize the different numeric ratings associated with the HazCom 2012 and HMIS schemes.HMIS RATINGS - HEALTH: 3* FLAMMABILITY: 1 PHYSICAL HAZARD: 0* - Indicates a chronic hazard; see Section 2Revision: Section 2Effective Date: 03/05/2018DISCLAIMERThe information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations.。
刹车片检测标准
二、我国汽车制动器衬片行业现行标准：GB5763-2008 《汽车用制动器衬片》GB/T17469-1998 《汽车制动器衬片摩擦性能评价小样台架试验方法》GB/T5766-2006 《摩擦材料洛氏硬度试验方法》JC/T472—92 《汽车盘式制动块总成和鼓式制动蹄总成剪切强度试验方法》JC/T527-93 《摩擦材料烧矢量试验方法》JC/T528—93 《摩擦材料丙酮可溶物试验方法》JC/T685-1998 《摩擦材料密度试验方法》QC/T472-1999 《汽车制动器衬片耐水、盐水、油和制动液性能试验方法》QC/T473—1999 《汽车制动器衬片材料内抗剪强度试验方法》QC/T583-1999 《汽车制动器衬片显气孔率试验方法》QC/T42—1992 《汽车盘式制动器摩擦块试验后表面和材料缺陷的评价》三、制动器衬片行业国际标准体系:国外制动、传动衬片（块)及总成标准主要有欧洲系列、美国系列、日本（日本汽车工业协会标准）和ISO系列,ISO系列主要参照欧洲标准制订。
美国标准主要有SAE、FMVSS、AMECA等；欧洲标准主要为法规如AK（如AK1、AK2、AK3、AKM）、ECE（R13、R13H、R90）,EEC71/320；日本标准有JASO和JIS D。
美国和欧洲标准又基本分为主机配套用如FMVSS中的FMVSS121、122、105、135及AMECA 和R13、R13H及ISO11057,换装（售后）标准如SAE2430、TP121，R90及满足ECERl3最低要求等。
在美国无强制性标准，但售前必须批准、欧洲为法规市场售前必须进行EMARK认证。
ISO15484—2005（DIS）主要根据原全球规范而制订，引用了SAE、JASO、JIS D、ECE R90，并且规定了质量控制要求,是一个较完善的汽车摩擦材料标准。
从国际及国外汽车发达国家来看,均相当重视制动器衬片标准，都有专门的组织来负责，参照国际惯例，我国制动衬片标准也应归口在汽车行业，并成立专门的分标委来从事该项工作,便于与国际接轨如：⑴ ISO组织ISO制订的有关汽车制动衬片方面的有效标准21项及1项全球规范,另有6个相关标准，其制动衬片标准由TC22/SC2/WG2制订，其WG2工作组为SC2中五个工作组中最大工作组,因制动衬片涉及安全和环保，从2005年开始充实了较多人员,并相继制订了6个标准.⑵欧洲欧洲制动衬片标准系统一的法规，由WP29制订，WP29的全称为联合国世界车辆法规协调论坛(简称为UN/WP29）,专门负责ECE法规的制修订和实施工作。
日本油封精工O型圈手册
润滑油 No.1
润滑油 No.1
験
項 目
温度以及 时间
120℃ × 70hr
120℃ ×
70hr
23℃ × 70hr
100℃ ×
70hr
175℃ ×
70hr
175℃ ×
70hr
硬度变化 (Hs)
-5～+8
-5～+8
-8～0
-15～0 -10～+5 -10～+5
拉力强度
变化率(%) -15
-20
-15
拉力强度变化率（%）最 大
伸长变化率（%） 最大
100℃ × 70hr
+10
-15
-35
230℃ × 24hr
+10
-20
-25
230℃ ×
24hr
+5
-10
-25
230℃ ×
24hr
+5
-20
-25
120℃ × 70hr
+10
-20
-30
压缩永久变形试 验
温度以及时间 压缩永久变形（%）最大
100℃ × 70hr
70±1℃ ×
24hr
外观
不能有腐蚀对方金属或粘贴的现象。但，不能把金属面的变色视为腐 蚀。
本页TOP
区分 规格
材料的种类
JIS记号
材质(硬 度)
JASOF 404 4种 E ACM-70
标准材料
JIS K 6380
BII710
BIII710
NBR-70
CR-70
EPDM-70 EPDM-70
应用
耐热用 耐矿物油用 耐候用
coc武器列表
说明：db：伤害加权，具体数值因人而异。
勒颈：关于这种可能性，请参照“擒抱”技能的规则。
晕眩：在1轮、1d6轮或由守秘人指定的时间内，除了招架什么都做不了。
而且，必须通过一个[意志值×莫兰上校的气动步枪：靠压缩空气发射，不需要火药，因而比较安静。
[译注：典出自福尔摩斯的故事] 1/2、1/3：只有2轮或3轮攻击一次，才能做到准确攻击。
1或2：在同一轮中，可以选择只用一边、还是同时用两边的枪管射击。
①：这种武器、或武器类型可以造成贯穿。
②：本武器的伤害加权算上了马的冲击力。
③：采用“溺毙、窒息”的规则。
④：本枪械是重型加特林机关枪，一般装备在直升机上。
若想用手持的方式射击，则至少需具备16点力⑤：轻型反坦克武器，一次性使用。
☆：本武器不适用于“近距离平射”的规则。
★：本武器若造成贯穿，便可任意截下对手的一条肢体。
连射：民间不可能搞到能连射的枪械。
在这里给出的价格都是黑市价。
NA：平民禁止购买任何自动武器，即使拥有也是违法行为。
但有可能获得把合法武器改装成自动武器的故障值：如果一次火器发射的检定结果大于等于该武器的故障值，不仅攻击不会命中，子弹也会成为哑 但如果拿的是带杠杆式枪机的步枪，枪就会卡壳，射手必须用1d6个战斗轮的时间投“机器维修 而且，如果在检定时投出了96～00，枪就会被彻底弄坏。
直到枪被修好、或者被彻底弄坏为止散弹枪子弹的口径规格：10号为[1d10+8]、12号为[1d10+6]、16号为[1d10+5]、20号为[1d10+4]；基本射稀有：可能指已经属于古董的武器、也可能指专供收藏用的精致武器，亦有可能指违法的武器。
各时代价格：现代的价格指收藏品市场上的价格，1920年代的价格指市价。
单位一律为美元。
2码、3码等等：在伤害栏中所示的这个距离，指爆炸后的杀伤半径。
在爆炸范围之外，每远离一段相当阔剑地雷：这种武器的弹道是密集的射束流，其杀伤范围为120度。
附加说明(1)：标红色的武器未收录于规则书上，是我自己加的，数值也是我自己估算的，供有爱者使用附加说明(2)：标蓝色的武器出自日本Arclight公司出版的扩展规则《克苏鲁与帝国》，供有爱者使用。
OMEGABOND OB-400高温空气焊缝剂说明书
be applied should be clean and free of dirt or grease. Apply several coats where heavier layers are desired, allowing each coat to dry before application of the next coat. Do not apply OMEGABOND 400 cement in thickness greater than 1/4”. OMEGABOND 400 cement can be applied by brushing, dipping and spraying.Porous substrates should be dampened with OMEGABOND Thinning Liquid (Part No. OB-TL), prior to application of theOMEGA’s OB-400 cures at room temperature by air drying in 18-24 hours, depending upon thickness and consistency. Cure time can be accelerated by low temperature oven drying at 82°C (180°F). If the cement is to be exposed to elevated temperatures, cure for 18-24 hours at ambient temperature, then oven dry for 4 hours at 82°C (180°F) and for an additional 4 hours at 104°C (220°F). This helps to prevent flaking and chipping.PHYSICAL PROPERTIES*Maximum Service Temperature: 1427°C (2600°F) Thermal Conductivity: 11 Btu-in/sq.ft./-hr-°FTan to grayCoefficient of Thermal Expansion: 13.0 x 10-6 in/in°F3.4-4.5WARRANTY/DISCLAIMEROMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product.If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department will issue an Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no charge. OMEGA’s WARRANT Y does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of having been tampered with or shows evidence of having been damaged as a result of excessive corrosion; or current, heat, moisture or vibration; improper specification; misapplication; misuse or other operating conditions outside of OMEGA’s control. Components in which wear is not warranted, include but are not limited to contact points, fuses, and triacs.OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA neither assumes responsibility for any omissions or errors nor assumes liability for any damages that result from the use of its products in accordance with information provided by OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the company will be as specified and free of defects. OMEGA MAKES NO OTHER W ARRANTIES OR REPRESENTATIONS OF ANY KIND W HATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED W ARRANTIES INCLUDING ANY W ARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of OMEGA with respect to this order, whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the component upon which liability is based. In no event shall OMEGA be liable for consequential, incidental or special damages.CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility as set forth in our basic WARRANTY / DISCLAIMER language, and, additionally, purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the Product(s) insuch a manner.FOR WARRANTY RETURNS, please have the following information available BEFORE contacting OMEGA:1. P urchase Order number under which the product was PURCHASED,2. M odel and serial number of the product under warranty, and 3. R epair instructions and/or specific problems relative to the product.FOR NON-WARRANTY REPAIRS, consult OMEGA for current repair charges. Have the following information available BEFORE contacting OMEGA:1. Purchase Order number to cover the COST of the repair,2. Model and serial number of the product, and3. R epair instructions and/or specific problems relative to the product.OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. T his affords our customers the latest in technology and engineering. OMEGA is a registered trademark of OMEGA ENGINEERING, INC.© Copyright 2017 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the prior written consent of OMEGA ENGINEERING, INC.RETURN REQUESTS / INQUIRIESDirect all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RET URNING ANY PRODUCT (S) T O OMEGA, PURCHASER MUST OBT AIN AN AUT HORIZED RET URN (AR) NUMBER FROM OMEGA’S CUST OMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return package and on any correspondence.The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit.servicing North America:U.S.A.: O mega Engineering, Inc.Toll-Free: 1-800-826-6342 (USA & Canada only)Customer Service: 1-800-622-2378 (USA & Canada only) Engineering Service: 1-800-872-9436 (USA & Canada only) Tel: (203) 359-1660 Fax: (203) 359-7700 e-mail:**************For Other Locations Visit /worldwide***********************The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.WARNING: These products are not designed for use in, and should not be used for, human applications.。
Parker NSF-61认证水泥封闭材料产品目录说明书
Water System Sealing Solutions Potable Water NSF Standard 61 Listed MaterialsISO 9001 / QS 9000CertifiedCatalog PSG-5025/USASealsNSF®Of Official NSF ficial NSF Inter International T national T national TrademarkrademarkParker Hannifin Corporation Potable Water Sealing SolutionsPSG 5025IntroductionPotable Water Sealing SolutionsPSG 5025Parker Seal Group Divisions produce a wide range of “standard ”and “custom ” seal products for potable water applications fabricated from a wide variety of approved NSF Standard 61materials as well as many non-NSF Standard 61 materials.Seal materials used to produce these parts are guaranteed via our “C.B.I.” (controlled batch identification) system. This is a system of batch numbering, physical property testing, and traceability developed by Parker Seal Group which ties the entire quality control system together from the master batch to finished seals.Parker JBL Division Extruded & Cut Parts have been manu-factured for a large variety of high volume applications for over 35years. Our unique process for producing precision extrusion and cut static seals provides customers tremendous latitude indesign flexibility , typically with no tooling charges for any ID/OD combination from .040” to 3.000” outside diameters. JBL utilizes only “Sealing Grade ” material formulations with the highestpossible percentage of polymer for the most effective long-term sealing solutions.Extruded and Cut products are primarily supplied as ID/OD tubing type cross-sections, but are also supplied in a variety of different cross-sections such as: square, rectangular , triangular and many other profiles.FEA FEATURES - ADV TURES - ADV TURES - ADVANT ANT ANTAGES - BENEFITSAGES - BENEFITS • Custom designed seals can be produced for specific applications with no tooling required for ID/OD cross-sections saving the customer time and money.• Maximum sealing surface contact area can be ob-tained because of flat smooth edges with no hourglassing or mold flash.For more information regarding JBL Extruded & Cut Parts,please reference JBL inPHorm Design Software or ask for JBL5400 Capabilities Brochure.Parker O-Rings The Parker O-Ring Division offers EPDM and Nitrile NSF 61 approved elastomeric materials, ranging from 65 to 90 durometer , for use in sealing potable water applications.In addition to being NSF approved, these materialsalso minimize the potential for concentration of leachable contami-nants in potable water .Parker O-Rings are available in AS568A Standard, DIN, JIS metric or custom sizes, as the application warrants. Parker T echnical Support associates are available to address all design consider-ations such as temperature, pressure, gland design, surface finish,etc., and can propose several design alternatives. In addition, our staff can support additional testing requirements or work with you to develop the appropriate test protocol.FEA FEATURES - ADV TURES - ADV TURES - ADVANT ANT ANTAGES - BENEFITSAGES - BENEFITS • On going material development to respond to changesin the potable water systems industry. • Consistent physical properties to assure sealing integrity.• State-of-the-art equipment to ensure consistent process control.• In-house tooling design and fabricationcapability allows for quick turnaround and delivery of proto-types and production requirements.For additional information on all Parker O-Rings, pleasereference the Parker O-Ring inPHorm Design Software or ask for a copy of ORD5703 O-Ring Reference Guide.Product Lines - Extruded & Cut Parts & O-RingsT ypical Parker JBL Extr ypical Parker JBL Extruded and Cut Par uded and Cut Par uded and Cut Parts used in ts used in Potable W Potable Water Applicationsater Applications T ypical Parker O-Ring Seals used in Potable W ypical Parker O-Ring Seals used in Potable Water ater ApplicationsPotable Water Sealing SolutionsPSG 5025ParFab Extruded Profiles are typically used for fabrication into spliced rings, 4-Corner Spliced Picture Frame Gaskets or custom parts cut to specific lengths. However , these profiles can also be supplied in bulk footage. JBL offers manystandard extruded profiles in many configurations, such as:Solid & Hollow-O, Solid & Hollow D, U-Channel, Rectangular ,Solid & Hollow Square and Hollow-Dart configurations.Spliced/Fabricated Parts are made utilizing a hot vulcaniza-tion process to provide spliced rings and custom gaskets from either “standard ” or “custom ” cross-sectional profiles.These products offer an ideal, cost-effective sealing solution for many applications. These include low-closure force seals,large diameter profiles that cannot be molded, or require-ments for hollow O-rings, non-standard solid O-rings, and other extruded profiles with an inside diameter larger than 2.500.”FEA FEATURES - ADV TURES - ADV TURES - ADVANT ANT ANTAGES - BENEFITSAGES - BENEFITS • Suitable for use in either traditional grooves or may be applied directly to any flat surface.• Superior hot vulcanization technology provides stronger, more reliable joints.• Finite Element Analysis (FEA) available to optimize seal design.• Ease of adjusting closure-force by adjustment of cross-section design, cross-section I.D. or durometer. • Hollow cross-sections are excellent replacements for foam or sponge gaskets and offer superior compres-sion set resistance.• Interference fit designs with asymmetrical solid or hollow cross-sections allow for ease of assembly.For more information on JBL ParFab Extruded Profiles and Spliced Seals and Gaskets, please reference ParFab Catalog JBL-5420/USA.Parker Custom Molded Shapes are designed to meet customer specific requirements utilizing a wide range of NSF approved Parker materials. These seals are homogenous rubber parts functioning as sealing devices in both dynamic and static applications and are available up to 32 inches outside diameter with a cross section thickness up to 1.5 inches.Parker maintains a highly qualified staff of engineering professionals supported by a technical group using the latest CAD technology to assist you during the critical early design phase of your project.Our technical associates will work with you on function, shape and materials, to design the best sealing solution for your application.In addition, through our value analysis, we can assist you in selecting the most cost effective sealing solution while maintain-ing full sealing integrity and quality control.FEA FEATURES - ADV TURES - ADV TURES - ADVANT ANT ANTAGES - BENEFITSAGES - BENEFITS • Finite Element Analysis (FEA) available toshorten seal design time and provide the best sealing solution for the application.• Produced in NSF 61 materials as well as otherelastomer families, offering a wide selection of materials. • Designed to meet customer specific requirements to ensure compliance with all specifications.• Perfect fitting parts can result in less installation time and ultimately reduce assembly cost.For additional information or assistance in designing a custom molded seal or shape, please contact TechnicalSupport at the O-Ring Division.Product Lines - Molded Shapes & Spliced SealsParker Hannifin Corporation T ypical Parker Custom Molded SealsT ypical JBL ParFab Extr ypical JBL ParFab Extruded and Spliced Par uded and Spliced Par uded and Spliced PartstsParker Hannifin Corporation Potable Water Sealing SolutionsPSG 5025NSF Standard 61 Listed MaterialsSealsBuild With The Best!Parker Hannifin Corporation JBL Division3025 West Croft Circle Spartanburg, SC 29302T elephone (864) 573-7332FAX (864) 583-4299For the latest infor For the latest information on all Parker Hannifin pr mation on all Parker Hannifin pr mation on all Parker Hannifin products, visit our web site at www oducts, visit our web site at www oducts, visit our web site at www.parker .parker .comO-Ring Division 2360 Palumbo drive Lexington, KY 40509T elephone (606) 269-2351FAX (606) 268-3816• O-Rings• JBL Static Seals• O-Seal Standard Products • Parker Hydraulic & Pneumatic Seals• Chomerics EMI & Thermal Management ProductsFor fast, easy and accurate seal design assistance, obtain a copy of the latest iteration of Parker’s inPHorm™ Seal Design and Material Selection Software. Now available for:。
Omega PX409 高精度双向压力传感器说明书
HIGH ACCURACYTRANSDUCERS MICRO-MACHINEDSILICON COMPOUND PRESSURE RANGESCompound Pressure RangesmV/V, Voltage or Current OutputsU High Accuracy±0.08% BSL Includes Linearity, Hysteresis, and Repeatability U Broad Temperature Compensated Range -29 to 85°C (-20 to 185°F)U Premium Temperature Performance Span: ±0.5% OverCompensated Range U 5-Point NIST Traceable Calibration Included U All Stainless Steel Wetted PartsU Fast Response Time U Solid State Reliability and StabilityU 400% Proof Pressure MinimumOmega’s PX409 Series highaccuracy transducers bi-directional gage pressure range models have all stainless steel wetted parts and welded construction and premium temperature compensation which makes them suitable for use in tough industrial environments. Compound range transducers are available in 5 ranges whichmeasure positive and negative gage pressure and give a corresponding bi-directional outputs of ±10 mV/V, ±5 Vdc and 4 to 20 mA with ambient set at 12 mA. Ranges are available from ±10 inH 2O to ±15 psi.SPECIFICATIONSOutput:Millivolt: ±10 mV/V for compound A mplified Voltage: ±5 Vdc for compoundCurrent Loop: 4 to 20 mA(12 mA at 0 psig on compound ranges)Power Requirements:Millivolt: 5 to 10 Vdc (2 mA @ 10 Vdc) Amplified Voltage: 10 to 30 Vdc @ 10 mACurrent Loop: 9 to 30 Vdc [max loop res = [(Vs-9) x 50][9 to 20 Vdc above 105°C (229°F)]CE Compliant: Meets industrial emission and immunity standard EN61326Accuracy (Combined Linearity, Hysteresis and Repeatability): ±0.08% BSL max, calibrated inpositive direction only, with electrical connector upZero Balance: ±0.5% FS typical 1% max (1% typical, 2% max for ranges 1 psi and below)Span Setting: ±0.5% FS typical 1% max (1% typical, 2% max for ranges 1 psi and below)Operating Temperature Range: -45 to 121°C (-49 to 250°F) [-45 to 115°C (-49 to 240°F) for voltage or current outputs]Compensated Temperature: Ranges >5 psi: -29 to 85°C (-20 to 185°F)Ranges ≤5 psi: -17 to 85°C (0 to 185°F)Thermal Effects Zero (@ 0 psig Over Compensated Range): Ranges >5 psi: ±0.5% span Ranges ≤5 psi: ±1.0% spanThermal Effects Span (Over Compensated Range):Ranges >5 psi: ±0.5% span Ranges ≤5 psi: ±1.0% span Long Term Stability (1-Year): ±0.1% FS typicalShock: 50 g, 11 mS half sine, vertical and horizontal axisVibration: 5-2000-5 Hz, 30 minute cycle, Curve L, Mil-Spec 810 figure 514-2-2, vertical and horizontal axis Response Time: <1 msBandwidth: DC to 1 kHz typicalProof Pressure (positive direction): 10 inH 2O: 10 times full scale 1 psi: 6 times full scale2.5 psi and Higher: 4 times full scale (Negative direction 4 times or1 atmosphere whichever is greater)Burst Pressure:10 inH 2O to 15 psi: 1000 psi Electrical Termination:PX409: Integral 2 m (6') cable PX419: mini DIN PX429: Twist-lock PX459: M12Mating Connectors:PX419: CX5302 (included)PX429: PT06F10-6S (sold separately)Environmental Protection: PX409: IP67PX419, PX429 and PX459: IP65Wetted Parts: 316 SSPressure Port: 1⁄4-18 NPT male Calibration: Comes with 5-point calibration certificate (positivereadings only for compound ranges)Weight: 115 to 200 g (4 to 7 oz) depending upon configurationIP67 rated PX409-015CGV ±15 psi range shown actual size.IP65 rated PX419-001CGI ±1 psi bi-directional range shown actual size.PX409 SeriesCable style.mini DIN style.N o w A v a i l a b l e w i t h M 12 C o n n e ct o rProduct LabelHex 22 (0.87) AF¼-18 NPTCustom Models Available!smaller than actual size.Cablestyle.mini DINstyle.* To order cable version with 1⁄2 NPT conduit fitting, specify model PX409C, no extra cost.** To order with 0 to10 Vdc output change “5V” to “10V” in model number, no extra cost. Metric threads and ranges also available.Ordering Examples: PX409-015CGV, cable termination, ±15 psig range, ±10 mV/V output.PX419-001CG5V, mini DIN termination, ±1 psi range, ±5 Vdc, 0 volts @ 0 pressure output.PX429 TWIST LOCK PINOUTPX419 and PX459 PIN OUTPX409 and PX409C CABLE CONNECTIONPX409-015CGVPX429-001CGVPX419-001CGI。
Rogers Corp RO4003C
™/RO4350B™/RO4835™/ Anteo Laminates Circuit Processing GuidelinesThese guidelines were developed to provide fabricators basic information on processing double-sided and multilayered printed wiring boards (PWB’s) using RO4003C™, RO4350B™ , RO4835™ and Anteo™ laminates. Please refer to RO4400™ bondply processing guidelines for additional information on inner-layer preparation and multi-layer bonding.Storage: Fully clad RO4003C, RO4350B, RO4835 and Anteo laminates should be stored at room temperature (between 50-90°F/ 10-32°C). A first-in-first-out inventory system and a method to track material lot numbers through PWB processing and delivery of finished circuits is recommended.INNER LAYER PREPARATION:Tooling: RO4003C, RO4350B, RO4835 and Anteo laminates are compatible with many pinned and pinless tooling systems. Choosing whether to use round or slotted pins, external or internal pinning, standard or multiline tooling, and pre vs. post-etch punching would depend on the capabilities and preferences of the circuit facility and final registration requirements. In general, slotted pins, a multiline tooling format, and post-etch punching will meet most needs.Surface Preparation for Photoresist Processing and Copper Etching: Depending upon RO4003C, RO4350B, RO4835 and Anteo core thickness, copper surfaces can be prepared for photo imaging using chemical or mechanical processes. Thinner cores should be prepared using a chemical process consisting of cleaning, micro-etching, water rinsing, and drying steps. Thicker RO4003C, RO4350B, RO4835 and Anteo cores are compatible with mechanical scrub systems.RO4003C, RO4350B, RO4835 and Anteo materials are compatible with most liquid and dry film photo-resists and, once patterned, can be processed through develop, etch, and strip (DES) systems typically used to process FR-4 materials.Oxide Treatment: RO4003C, RO4350B, RO4835 and Anteo cores can be processed through any copper oxide or oxide alternative process in preparation for multilayer bonding. The best treatment choice is typically the one recommended in the guidelines supporting the chosen prepreg or adhesive system.Multilayer Bonding: RO4003C, RO4350B, RO4835 and Anteo laminates are compatible with many thermosetting and thermoplastic adhesive systems. Guidelines for the adhesive system should be consulted for bond cycle parameters.DRILLING:Drilling Considerations: Standard entry (aluminum or thin pressed phenolic) and exit (pressed phenolic or fiber board) materials can be used when drilling RO4003C, RO4350B, RO4835 and Anteo cores or bonded assemblies in one-up or multi-up stacks.RO4003C, RO4350B, RO4835 and Anteo materials are compatible with a broad range of drilling parameters. However, drilling speeds greater than 500 surface feet per minute (SFM) should be avoided. Chip loads greater than 0.002”/” are recommended for mid-range and large diameter tools while lower chiploads (<0.002”/”) are recommended for small (<0.0135”) diameter drills. In general, standard geometry drills are preferred over undercut styles as they more effectively evacuate debris from the holes during the drilling process.Hit counts should be based on inspection of plated-through holes (PTH’s) and not the appearance of the tools. Drilling RO4003C, RO4350B,RO4835 and Anteo laminates will result in an accelerated wear rate of drills. But, hole wall quality is determined by the size distribution of the ceramic powder and not by the cutting edge of the drill bit. A hole wall roughness ranging from 8 to 25 µm is expected and should remain consistent from the initial hit through several thousand hits.Offered below are a summary of recommended drill parameters, equations for using surface speed and chip load to calculate spindle speeds and infeed rates, and a ready-reference drill table. A Rogers Technical Service Engineer (TSE) should be contacted for more detailed information.Recommended Ranges:Surface Speed300-500 SFM (90 to 150m/min)Chip Load0.002”-0.004”/rev. (0.05-0.10mm)Retract Rate500 IPM (12.7m/min) for tools less than 0.0135” (0.343mm), 1,000 IPM(25.4 m/min) for all othersTool Type Standard carbideTool Life2,000-3,000 hitsCALCULATING SPINDLE SPEED AND INFEED:Spindle Speed = (12 x Surface Speed (SFM)]/(π x Tool Diam. (in.))Feed Rate (IPM) = [Spindle Speed (RPM)] x [Chip Load (in/rev.)]Example:Desired Surface Speed: 400 SFMDesired Chip Load: 0.003”(0.08 mm)/rev.Tool Diameter: 0.0295”(0.75 mm)Spindle Speed = (12 x 400)/(3.14 X 0.0295) = 51800 RPMInfeed Rate = 51,800 x 0.003 = 155 IPMQUICK REFERENCE TABLE:Tool Diameter Spindle Speed (kRPM) Infeed Rate (IPM)0.0100” (0.254mm)95.51900.0135” (0.343mm)70.71410.0160” (0.406mm)95.51900.0197” (0.500mm)77.61900.0256” (0.650mm)60.01800.0258” (0.655mm)60.01800.0295” (0.749mm)51.81550.0354” (0.899mm)43.21300.0394” (1.001mm)38.81160.0453” (1.151mm)33.71010.0492” (1.257mm)31.1930.0531” (1.349mm)28.8860.0625” (1.588mm)24.5740.0935” (2.350mm)16.5500.0625” (1.588mm)24.5740.0925” (2.350mm)16.5500.1250” (3.175mm)15.045•Conditions stated are tapered from 200 SFM and 0.002” chip load up to 400 SFM and 0.003”chip load.PTH PROCESSING:Surface Preparation: Thick multilayer and double-sided constructions can be processed through conveyorized debur equipment that uses oscillating nylon brushes to abrade the copper surfaces. Thinner layers may require pumice scrubbing by hand, conveyorized processing with an abrasive spray, or chemical preparation. In general, the thickness of the material and registration requirements should be considered when choosing the best method of debur and surface preparation.Desmear is typically not required of drilled holes in double-sided boards as the high glass transition temperature of the resin system (>280°C/ >536°F) minimizes the occurrence of smear. Multi-layer boards may require desmear depending upon the needs of the bondply or prepreg layers. If desmear is required, a single or double pass through alkaline permanganate or a CF4/O2 plasma process may be used.We recommend against etchback of the RO4003C, RO4350B, RO4835 and Anteo laminate layers as this might result in aggressive etchback of resin near copper layers and loosening of filler particles on the hole wall.Metal Deposition:RO4003C, RO4350B, RO4835 and Anteo materials do not require special treatments prior to metallization and are compatible with electroless copper processing and direct deposition of ionic and colloidal conductive layers. A copper flash plate (0.00025”) prior to imaging might be considered for boards with high aspect ratio holes.COPPER PLATING & OUTER-LAYER PROCESSING:RO4003C, RO4350B, RO4835 and Anteo laminates are compatible with panel and pattern processing using standard acid copper and electrolytic tin or tin/lead plating. Once plated, RO4003C, RO4350B, RO4835 and Anteo laminates can be processed through any standard strip/etch/strip (SES) process.The post-etch surface of RO4003C, RO4350B, RO4835 and Anteo laminates should be preserved as this surface will bond very well with direct screened and photo-imageable solder masks.Final Metal Finishes:RO4003C, RO4350B, RO4835 and Anteo laminates are compatible with organic solderability preservatives (OSP’s), hot air solder levelling (HASL), and most chemically deposited or electroplated finishes.FINAL CIRCUITIZATION:Circuits made using RO4003C, RO4350B, RO4835 and Anteo laminates can be “individualized “ by dicing, sawing, shearing, routing or punching. V-scoring and breakaway tabs can be used to facilitate individualization of circuits after automated assembly.Recommendations for routing are provided below:ROUTING:RO4003C, RO4350B, RO4835 and Anteo laminates are routed using carbide tools and conditions that are typical to processing traditional epoxy/ glass materials. Copper should be etched away from the routing path to prevent burring.MAXIMUM STACK HEIGHT:The maximum stack height should be based on 70% of the actual flute length to allow for debris removal.Example:Flute Length: 0.300” x 0.70 = 0.210”(5.33 mm)Backer Penetration: – 0.030”(0.762mm)Max. Stack Height: 0.180”(4.572mm)TOOL TYPE:Carbide multi-fluted spiral chip breakers or diamond cut router bits.The information in this data sheet is intended to assist you in designing with Rogers’ circuit materials. It is not intended to and does not create any warranties express or implied, including any warranty of merchantability or fitness for a particular purpose or that the results s hown on this data sheet will be achieved by a user for a particular purpose. The user should determine the suitability of Rogers’ circuit materials for eac h application.These commodities, technology and software are exported from the United States in accordance with the Export Administration regula tions. Diversion contrary to U.S. law prohibited.RO4400, RO4003C, RO4835, RO4350B, Anteo and the Rogers’ logo are trademarks of Rogers Corporation or one of its subsidiaries ©2023 Rogers Corporation, Printed in U.S.A. All rights reserved.Revised 1643 060223 Publication #92-433ROUTING CONDITIONS:Surface speeds below 500 SFM should be used whenever possible to maximize tool life. Tool life is generally greater than 30 linear feet when routing the maximum allowable stack height. Chip Load:0.0010-0.0015”(0.0254-0.0381mm)/revSurface Speed:300 – SFMQUICK REFERENCE TABLE:Tool DiameterSpindle Speed Lateral Feed Rate1/3240k RPM 50 IPM 1/1625k RPM 31 IPM 3/3220k RPM 25 IPM 1/815k25 IPMSHELF LIFE:Rogers’ High Frequency laminates can be stored for extended durations under ambient room temperatures (55-85°F, 13-30°C) and humidity levels. At room temperature, the dielectric materials are inert to high humidity. However, metal claddings such as copper can be oxidized during exposure to high humidity. (Oxidation on the copper surface can easily be removed in a standard micro-etch process.) In addition, over an extended period (>5 years) the exposed dielectric along edges of the panel may experience detectable levels of oxidation. Accounting for standard tooling hole and trim loss, such trace levels of oxidation would not be expected to extend into the utilized portion of the laminate. Please note however, that as each application is different, Rogers cannot warrant that its products are fit for any particular end use, and, as always, Rogers recommends that the circuit designer and/or the end user test the properties and performance of these materials in each proposed application to determine their fitness for use over the entire product life.Prolonged exposure in an oxidative environment may cause changes to the dielectric properties of hydrocarbon based materials. The rate of change increases at higher temperatures and is highly dependent on the circuit design. Although Rogers’ high frequency materials have been used successfully in innumerable applications and reports of oxidation resulting in performance problems are extremely rare, Rogers recommends that the customer evaluate each material and design combination to determine fitness for use over the entire life of the end product.。
日本油封精工O型圈手册
伸长变 化率 （%）
体积变 化率 （%）
77 16.0
170
10.0
200℃ × 70hr 1
±0
+6 200℃
× 70hr 19
‐ ‐ ‐
‐
‐ ‐ ‐ ‐ ‐
‐
‐ ‐
74 11.8
110
11.4
200℃ × 70hr -1
+3
+9 200℃
× 70hr 13
‐ ‐ ‐
‐
‐ ‐ ‐ ‐ ‐
‐
‐ ‐
硬度变
化(Hs)
+10
+15
+15
+10
最大
老化试验
拉力强
度变化 率(%)最
-30
-20
-15
-10
大
伸长变
化率(%)
-40
-50
-40
-30
最大
温度以 及时间
150℃ ×
70hr
100℃ × 70hr
100℃ × 70hr
100℃ × 70hr
压缩永久变形试验
圧縮永
试
久变形
60
35
50
50
验
(%)最大
耐热用
耐热用
耐蒸汽 用
低圧縮 歪用
硬度 拉力强度（MPa）最小
A70±5 A50±5 A50±5 A70±5 A70±5
6.8
4.9
6.9
14.7
9.8
常态
伸长（%）最小
300
200
300
200
200
拉力应力（MPa）最小
‐
‐