TUV测试报告(EN71-1-2-3 AZO 6p
夜光粉EN71-3检测报告超亮夜光粉

03
耐候性
耐候性是指夜光粉在不同环境条件下的稳定性。优质品牌的夜光粉通常
具有较好的耐候性,能够在不同温度、湿度和紫外线照射下保持稳定的
发光性能。
不同粒径夜光粉性能对比
粒径大小
夜光粉的粒径大小对其发光性能有重要影响。较小粒径的夜光粉具有更大的比表面积,能 够吸收更多的激发光并发出更亮的光。
发光均匀性
为员工配备必要的个人防护用品, 如防护服、手套、口罩等,降低 接触有害物质的风险。
废弃物处理和回收建议
废弃物分类
对生产过程中产生的废弃 物进行分类收集,确保不 同类型废弃物得到妥善处 理。
回收再利用
鼓励企业采用回收技术, 对废弃物进行再利用,减 少资源消耗和环境污染。
处置合规性
确保废弃物的处置符合国 家和地方环保法规要求, 防止对环境和人体健康造 成不良影响。
夜光粉en71-3检测报告超亮夜光 粉
目 录
• 引言 • 夜光粉en71-3检测标准与流程 • 超亮夜光粉性能检测结果分析 • 与其他类型夜光粉性能对比 • 超亮夜光粉应用领域探讨 • 环保与安全性评估及建议 • 总结与展望
01 引言
目的和背景
保障儿童玩具安全
EN71-3是欧洲玩具安全标准的一部分,旨 在确保玩具在化学和物理性质上对儿童安全 。对于含有夜光粉的玩具,需要进行专门的 检测以确保其符合相关法规和标准。
THANKS FOR WATCHING
感谢您的观看
耐候性
经过模拟不同气候条件下的测试,超 亮夜光粉的发光性能保持稳定,没有 出现明显的衰减。
安全性指标测试结果
01
02
03
无毒无害
经过权威机构检测,超亮 夜光粉不含有毒有害物质, 对人体无害。
en71测试标准

en71测试标准
EN71测试标准是指欧洲玩具安全联盟(European Toy Safety Association)制定的一套欧洲玩具安全标准,其中EN71-1规定了玩具材料安全性的标准,EN71-2规定了玩具结构安全性的标准,EN71-3规定了玩具本身的安全性标准,而EN71-4则是规定了玩具的包装安全性的标准。
EN71测试标准主要针对儿童玩具的安全性,它规定了玩具材料的安全性,玩具结构的安全性,玩具本身的安全性,以及玩具的包装安全性四个方面的标准。
在玩具材料安全性方面,EN71规定所有使用的玩具材料必须符合国际标准,玩具材料不能含有有毒物质,这些有毒物质包括重金属,挥发性有机物,多氯联苯,溴等物质。
在玩具结构安全性方面,EN71规定玩具的结构必须符合国际标准,玩具不能有任何可以伤害儿童的结构,比如尖角,尖锐物,小零件等,以及玩具的结构不能太容易被儿童拆开。
在玩具本身安全性方面,EN71规定玩具的使用要符合国际标准,玩具不能有任何可以伤害儿童的动作,比如发出大音量的噪音,发出明显的蓝光,以及其他可能对儿童造成伤害的动作。
在玩具包装安全性方面,EN71规定所有使用的玩具包装必须符合
国际标准,玩具包装不能有任何可能伤害儿童的物质,比如小零件,大小不当的零件,以及易燃的物质等。
EN71测试标准是为了确保玩具的安全性,其中的玩具材料安全性,玩具结构安全性,玩具本身安全性,玩具包装安全性等要求都是为儿童的安全而设立的,在欧洲乃至世界范围内,EN71测试标准都被认可和接受,是目前玩具安全性最严格的标准之一。
可塑橡皮EN71-123(中文版)测试报告

测试报告编号: QDHL1703004537ST_CN 日期: 2017 年03 月21 日第1页共6页河北青竹画材科技有限公司河北省故城县衡德工业园青竹路1 号以下样品由客户提供及确认: 可塑橡皮样品数量: 1 款x 1 个SGS 参考报告: TAOTY1700922202/ TJHL1703000762ST产品年龄标识: 未提供申请测试年龄: 12+ 按年龄指引所评估的年龄: / 实际测试年龄: 12 岁以上收样日期: 2017 年03 月13 日最终确认日期: 2017 年03 月20 日测试日期: 2017 年03 月13 日至2017 年03 月21 日测试要求: 结果本产品不是玩具,根据申请者的要求,参考EN71 标准进行测试。
此产品可能会存在本标准要求外的一些危险和标签的要求:- EN71-1: 2014-玩具安全-第一部分:机械和物理属性符合- 标签要求(洗涤/清洁标识,CE 标识,进口商/制造商信息(名称,地址),产品识别信息-基于新玩具指令-2009/48/EC 之要求)见结果页- EN71-2:2011+A1:2014 -玩具安全-第二部分:玩具的可燃性符合- EN71-3:2013+A1:2014 -玩具安全-第三部分:特定元素的迁移(针对第一类:干燥、易碎、粉状或易弯曲的玩具材料)见测试结果备注:除非另有说明,本检验结果仅对测试样负责。
未经检验机构书面同意,委托人不得擅自使用检验结果进行不当宣传。
通标标准技术服务有限公司青岛分公司批准人签署:周新宽实验室经理测试报告编号: QDHL1703004537ST_CN 日期: 2017 年03 月21 日第2页共6页观察结果展示部位洗涤/清洁标识不适用/CE 标识存在包装进口商的名称,地址不存在/制造商的名称,地址不存在/产品识别信息存在包装测试结果:- 物理和机械属性根据欧洲玩具安全标准EN71-1:2014条款描述结果4一般要求4.1材料清洁…………………………..................................................…….……………符合4.7边……….............................................................................................…………….…符合4.8尖端和金属丝………............................................................................………………符合- 标签要求(洗涤/清洁标识,CE 标识,进口商/制造商信息 (名称,地址),产品识别信息-基于新玩具指令-2009/48/EC之要求)结果:备注:1. 根据玩具指令2009/48/EC之要求,供36个月以下儿童使用的玩具的设计和生产必须保证其能够得到清洁。
en71认证内容

en71认证内容
EN71认证是欧盟市场玩具类产品的规范标准,包括一系列针对玩具的特定安全要求进行测试和评估的部分。
这些部分具体为:
1. EN71-1:机械和物理性能测试,包括对玩具的尺寸、耐久性、强度、边缘和尖锐部分的评估。
2. EN71-2:可燃性测试,评估玩具材料的燃烧性能,包括燃烧速度、火焰蔓延性和剩余燃烧。
3. EN71-3:有害物质测试,检测玩具中的重金属、有机化合物和其他有害物质的含量,例如铅、镉、汞等。
4. EN71-4:化学性能测试,评估玩具材料的化学性能,包括溶解性、PH 值和酸碱性。
5. EN71-5:安全性测试,针对特定类别的玩具,如弹簧玩具、玩具填充物等,进行安全性能评估。
6. EN71-6:标签和说明,要求制造商提供正确的标签和使用说明,以确保玩具的正确使用和警告信息。
电动玩具的CE认证标准,主要基于欧洲委员会的低电压指令(Low Voltage Directive)和电磁兼容性指令(Electromagnetic Compatibility Directive)要求。
电动玩具需要满足的主要标准有:
1. EN62115:电动玩具安全性规范,对电动玩具的电气性能、机械性能、材料和构造进行评估。
2. EN50088:电动玩具电磁兼容性规范,评估电动玩具在电磁场环境下的电磁兼容性能,确保其正常工作而不受干扰。
3. EN:对于充电式电动玩具,需要满足家用和类似用途电器的安全标准。
以上内容仅供参考,建议您在进行检测和认证前咨询权威认证机构,以确保您的产品符合相关标准和法规。
EN71认证标准及测试项目介绍

EN71认证标准及测试项目介绍EN71是欧盟市场玩具类产品的规范标准。
儿童是全社会关心和爱护的群体,儿童普遍喜爱的玩具市场发展迅猛,同时各类玩具由于各方面质量问题给儿童带来的伤害也时有发生,因此对本国市场上的玩具的要求正日益变得严格。
许多国家都就这些产品建立了自己的安全规章,生产公司必须保证其产品在该地区销售前符合相关标准。
制造商必须对因生产缺陷、不良设计或不适当材料的使用而导致的事故负责。
由此在欧洲推出玩具EN71认证法令,其意义是通过EN71标准对进入欧洲市场的玩具产品进行技术规范,从而减少或避免玩具对儿童的伤害。
欧盟玩具标准EN71总体上主要分为三大部分:1、机械和物理性能测试2、燃烧性能测试3、化学性能测试玩具EN71检测项目:EN71全系列标准: EN71-1~ EN71-11(目前应用的总共11部分);一般性玩具、日用品、工艺品、类似玩具的产品、婴儿用品等至少需要经受EN71-1; -2; -3; 这三部分的考核。
EN71测试共11部分,一般产品只需要做前三部分检测。
EN71-1,物理和机械性能测试,主要包括锐利边缘、拉力、压力测试等。
EN71-2,阻燃测试,主要包括玩具的燃烧速度,涉及到毛绒玩具丝织品玩具和戴在头上的玩具等。
EN71-3,19项重金属溶出,铝、锑、砷、钡、硼、镉、铭(lI)、铬(VI)、钴、铜、铅、锰、汞、镍、硒、锶、锡、有机锡、锌。
玩具EN71认证所需资料:1,需要2- 3个测试样品2.产品说明书或使用手册3.检测申请表(我司提供表格)4.零部件清单(BOM表)玩具EN71认证的流程:1.填写申请表2.提供产品的资料(说明书,电路原理图,如是多个型号的,提供型号差异列表)3.寄样4.测试5.出报告/证书。
EN71-1(

12
4. 一般要求
4.10.4 弹簧
下列弹簧必须不可触及: - 螺旋状弹簧旳两个螺线之间旳空隙不小于3mm时 - 拉伸弹簧在40N拉力作用下,两相邻弹簧间距离不小于3mm - 压力弹簧处于静止时,相邻两弹簧之间距离不小于3mm,且
玩具使用时能承受不小于40N
进行如下测试时,不能倒塌,分开成几部分或锁定装置失效。 - 主副锁定装置均作用时,100kg负载向下作用于方向杆5分钟 - 仅副锁定装置作用时,50kg负载向下作用于方向杆5分钟 - 滑板车倒放于支撑架上,主副锁定装置均作用时,悬挂50kg 负载于方向杆上5分钟
25
4. 一般要求
4.15.5.4 可调整高度及可折叠旳操纵杆:
2) 软性投射物为 0.5J
弓和箭 (必须符合要求)
- 出售旳带有箭旳弓在本原则中作为玩具看待。其潜在危险性应按照
7.7旳要求加以阐明
Warning! Do not aim at eyes or face.
30
4. 一般要求
4.18 水上玩具
- 气塞应与玩具阀相连。 - 终止阀必须能被推动玩具,使其距玩具表面不超出 5mm。 - 扭力拉力试验后,终止阀应不能完全溶入小部件筒内。 - 应提醒使用者注意使用水上玩具旳潜在危险。
3
4. 一般要求
4.1 材料 4.2 装配
所用原材料需要清洁卫生。
供组装旳玩具必须附有详细旳组装阐明。 供成年人组装旳玩具必须有明确旳阐明。
4
4. 一般要求
4.3 柔韧旳塑料薄膜
面积不小于100mm x 100mm旳薄膜,须 A) 平均厚度不能少于0.038mm B) 若少于0.038mm,则须在任意30mm x 30mm面积内 至少有1%面积旳孔以作呼吸。 C) 对于塑料气球, 在不充气或不破坏气球旳情况下,双层塑料薄膜
TUV测试报告(EN71-1-2-3 AZO 6p

The submitted sample was identified and described by client as:1.Test in accordance with EN71-1 : 2011Mechanical and Physical Properties2. Test in accordance with EN 71- 2 : 2011 Flammability3. Test in Accordance with EN 71- 3 : 1994 with amendment A1:2000 / AC:2002 – Migration of certain elements.4. Phthalates Content TestDBP, BBP, DEHP, DINP, DNOP and DIDP Phthalate Content Test– Entry 51/52 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No1907/2006 (previously restricted under Direc-tive 2005/84/EC).5. Azo-Dye Test– Entry 43 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No1907/2006.Test Method:Please refer to next page(s).64.161.12.0281.01This report is the resultof a single examination of the object in question and is not generally applicable evaluation of the quality of other products in regular production.PASS002Red fabric003Blue fabric004White fabric net005White Velcro006Multicolor printed white label2Order2.1 Date of Purchase Order2012-05-212.2 Receipt of Test Sample, Location2012-05-21, 2012-06-04, 2012-06-06, Guangzhou2.3 Date of Testing2012-05-22 to 2012-05-30, 2012-06-04 to 2012-06-05, 2012-06-06 to 2012-06-062.4 Location of TestingThe test was performed in Jiangsu TÜV Product Service Ltd. Shenzhen Branch and thetest results were reviewed at Jiangsu TÜV Product Service Ltd. Guangzhou Branch.NNFFT Remark*4General requirements4.1Material cleanliness C4.7Edges C4.8Points and metallic wires C4.14Enclosures C7Warnings, markings and instructions for use#7.1General C7.2Toys not intended for children under 36 months C^Remarks# =As per Directive 2009/48/EC, the following marking shall be fulfilled.- The CE marking shall be affixed visibly, legibly and indelibly to the toy, to an affixed label or to the packaging, in counter display which shall be subject to the general principles set out inArticle 30 of Regulation (EC) No 765/2008.- The manufacturer’s name and address, importer’s name and address in EEC shall be indicated on the toy or, where that is not possible, on its packaging or in a document accompanying thetoy.- The toys bear a type, batch, serial or model number or other element allowing their identification, or where the size or nature of the toy does not allow it, that the requiredinformation is provided on the packaging or in a document accompanying the toy.- The toy shall be, if applicable, accompanied by instructions and safety information in a language or languages easily understood by consumers, as determined by the Member Stateconcerned.* Abbreviation : C = Complied;^ : Retest sample was received on 2012-06-06T Remark*4.1General C4.4Toys intended to be entered by a child C^Remarks* Abbreviation : C=Complied^ : Retest sample was received on 2012-06-063.3 Migration of certain elements test with reference to EN71 Part 3:1994 + A1: 2000/AC: 2002 - Migration of certain elements.As stated in the above specifications. Heavy metal analysis was determined by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES).ElementsResult [mg/kg]MaximallypermissibleLimits[mg/kg] 001002003004005006Soluble Antimony < 5.0 < 5.0 < 5.0 < 5.0 < 5.0 < 5.060 Soluble Arsenic 2.5 2.5 2.5 2.5 2.5 2.5Soluble Barium< 5.0 < 5.0 < 5.0 < 5.0 < 5.0 < 5.01000 Soluble Cadmium < 5.0 < 5.0 < 5.0 < 5.0 < 5.0 < 5.075 Soluble Chromium 5.0 5.0 5.0 5.0 5.0 5.0Soluble Lead 5.0 5.0 5.0 5.0 5.0 5.0Soluble Mercury< 5.0 < 5.0 < 5.0 < 5.0 < 5.0 < 5.060 Soluble Selenium < 5.0 < 5.0 < 5.0 < 5.0 < 5.0 < 5.0500 Note:“mg/kg”denotes milligram per kilogram<”denotes “less than”ement001+002004+006005Detection Limit+003Dibutyl Phthalate(DBP)N.D.N.D.N.D.0.005% Benzylbutyl Phthalate(BBP)N.D.N.D.N.D.0.005%Di(2-ethylhexyl) Phthalate (DEHP)N.D.N.D.N.D.0.005% Total (DBP+BBP+DEHP)< 0.1%< 0.1%< 0.1%---Diisononyl Phthalate(DINP)N.D.N.D.N.D.0.005%Di-n-octyl Phthalate(DNOP)N.D.N.D.N.D.0.005% Diisodecyl Phthalate(DIDP)N.D.N.D.N.D.0.005% Total (DINP+DNOP+DIDP)< 0.1%< 0.1%< 0.1%---Note :1. “N.D.” = “Not Detected”2. “<” = “Less than”3. “%” means “percentage by weight”For reference:Entry 51/52 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC)No 1907/2006 (previously restricted under Directive 2005/84/EC):For DBP, BBP, DEHP(1)Shall not be used as substances or in mixtures, in concentrations greater than 0,1 % byweight of the plasticised material, in toys and childcare articles.(2) Toys and childcare articles containing these phthalates in a concentration greater than0,1 % by weight of the plasticised material shall not be placed on the market.For DINP, DNOP, DIDP(1) Shall not be used as substances or in mixtures, in concentrations greater than 0,1 % byweight of the plasticised material, in toys and childcare articles which can be placed in themouth by children.(2) Such toys and childcare articles containing these phthalates in a concentration greater than0,1 % by weight of the plasticised material shall not be placed on the market.Result [mg/kg]Result [mg/kg]001+002+003601 4-aminobiphenyl92-67-102 Benzidine92-87-503 4-chloro-o-toluidine95-69-204 2-naphthylamine91-59-805 o-aminoazotoluene97-56-306 5-nitro-o-toluidine99-55-807 4-chloroaniline106-47-808 2,4-diaminoanisole615-05-4< 5< 509 4,4'-diaminodiphenylmethane101-77-910 3,3'-dichlorobenzidine91-94-111 3,3'-dimethoxylbenzidine119-90-412 3,3'-dimethylbenzidine119-93-713 4,4'-methylenedi-o-toluidine838-88-014 p-cresidine120-71-815 4,4'-methylene-bis-(2-chloro-aniline)101-14-416 4,4'-oxydianiline101-80-417 4,4'-thiodianiline139-65-118 o-toluidine95-53-419 2,4-toluenediamine95-80-7< 5< 520 2,4,5-trimethylaniline137-17-721 4-aminoazobenzene *60-09-322 2-methoxyaniline90-04-023 2,4-xylidine95-68-124 2,6-xylidine87-62-7MethodLimitConclusionNote: 1.“<” = “less than”2. All concentrations express in “mg/kg”(milligram per kilogram), mg/kg ~ ppmVic Zheng。
欧洲en71标准

欧洲en71标准
EN71是欧洲玩具安全标准的系列标准,主要由欧洲标准化委员会(CEN)发布。
这一系列标准旨在确保玩具的安全性,以防止儿童因使用玩具而受到伤害。
EN71标准分为多个部分,每个部分涵盖了不同方面的安全性要求。
以下是EN71标准的一些主要部分:
1.EN71-1:定义了机械和物理性质的要求,以确保玩具在正常
使用过程中不会引起危险。
2.EN71-2:涵盖了有关玩具可燃性的要求,以确保玩具在火灾
中不会造成不必要的危险。
3.EN71-3:关注玩具中有毒物质的要求,包括重金属、染料等。
4.EN71-4:针对实验室玩具和化学实验玩具的安全性要求。
5.EN71-5:关注活动材料的安全性,例如涂料、油漆、颜料等。
6.EN71-6:适用于图画和颜料方面的玩具,涵盖了关于玩具颜
料的特殊要求。
7.EN71-7:关注于泡泡剂的安全性要求。
8.EN71-8:针对弹射玩具的安全性要求。
9.EN71-9:适用于气体操作玩具的安全性要求。
10.E N71-10:针对液体流动玩具的安全性要求。
11.E N71-11:适用于玩具充气结构的安全性要求。
这只是EN71标准系列的一部分,每个部分都专注于特定类型的玩具或特定的安全性方面。
制造商和出口商通常需要确保其生产的玩具
符合EN71标准的适用部分,并通过相关的测试和认证程序,以确保玩具的安全性和合规性。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
The submitted sample was identified and described by client as:1.Test in accordance with EN71-1 : 2011Mechanical and Physical Properties2. Test in accordance with EN 71- 2 : 2011 Flammability3. Test in Accordance with EN 71- 3 : 1994 with amendment A1:2000 / AC:2002 – Migration of certain elements.4. Phthalates Content TestDBP, BBP, DEHP, DINP, DNOP and DIDP Phthalate Content Test– Entry 51/52 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No1907/2006 (previously restricted under Direc-tive 2005/84/EC).5. Azo-Dye Test– Entry 43 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No1907/2006.Test Method:Please refer to next page(s).64.161.12.0281.01This report is the resultof a single examination of the object in question and is not generally applicable evaluation of the quality of other products in regular production.PASS002Red fabric003Blue fabric004White fabric net005White Velcro006Multicolor printed white label2Order2.1 Date of Purchase Order2012-05-212.2 Receipt of Test Sample, Location2012-05-21, 2012-06-04, 2012-06-06, Guangzhou2.3 Date of Testing2012-05-22 to 2012-05-30, 2012-06-04 to 2012-06-05, 2012-06-06 to 2012-06-062.4 Location of TestingThe test was performed in Jiangsu TÜV Product Service Ltd. Shenzhen Branch and thetest results were reviewed at Jiangsu TÜV Product Service Ltd. Guangzhou Branch.NNFFT Remark*4General requirements4.1Material cleanliness C4.7Edges C4.8Points and metallic wires C4.14Enclosures C7Warnings, markings and instructions for use#7.1General C7.2Toys not intended for children under 36 months C^Remarks# =As per Directive 2009/48/EC, the following marking shall be fulfilled.- The CE marking shall be affixed visibly, legibly and indelibly to the toy, to an affixed label or to the packaging, in counter display which shall be subject to the general principles set out inArticle 30 of Regulation (EC) No 765/2008.- The manufacturer’s name and address, importer’s name and address in EEC shall be indicated on the toy or, where that is not possible, on its packaging or in a document accompanying thetoy.- The toys bear a type, batch, serial or model number or other element allowing their identification, or where the size or nature of the toy does not allow it, that the requiredinformation is provided on the packaging or in a document accompanying the toy.- The toy shall be, if applicable, accompanied by instructions and safety information in a language or languages easily understood by consumers, as determined by the Member Stateconcerned.* Abbreviation : C = Complied;^ : Retest sample was received on 2012-06-06T Remark*4.1General C4.4Toys intended to be entered by a child C^Remarks* Abbreviation : C=Complied^ : Retest sample was received on 2012-06-063.3 Migration of certain elements test with reference to EN71 Part 3:1994 + A1: 2000/AC: 2002 - Migration of certain elements.As stated in the above specifications. Heavy metal analysis was determined by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES).ElementsResult [mg/kg]MaximallypermissibleLimits[mg/kg] 001002003004005006Soluble Antimony < 5.0 < 5.0 < 5.0 < 5.0 < 5.0 < 5.060 Soluble Arsenic 2.5 2.5 2.5 2.5 2.5 2.5Soluble Barium< 5.0 < 5.0 < 5.0 < 5.0 < 5.0 < 5.01000 Soluble Cadmium < 5.0 < 5.0 < 5.0 < 5.0 < 5.0 < 5.075 Soluble Chromium 5.0 5.0 5.0 5.0 5.0 5.0Soluble Lead 5.0 5.0 5.0 5.0 5.0 5.0Soluble Mercury< 5.0 < 5.0 < 5.0 < 5.0 < 5.0 < 5.060 Soluble Selenium < 5.0 < 5.0 < 5.0 < 5.0 < 5.0 < 5.0500 Note:“mg/kg”denotes milligram per kilogram<”denotes “less than”ement001+002004+006005Detection Limit+003Dibutyl Phthalate(DBP)N.D.N.D.N.D.0.005% Benzylbutyl Phthalate(BBP)N.D.N.D.N.D.0.005%Di(2-ethylhexyl) Phthalate (DEHP)N.D.N.D.N.D.0.005% Total (DBP+BBP+DEHP)< 0.1%< 0.1%< 0.1%---Diisononyl Phthalate(DINP)N.D.N.D.N.D.0.005%Di-n-octyl Phthalate(DNOP)N.D.N.D.N.D.0.005% Diisodecyl Phthalate(DIDP)N.D.N.D.N.D.0.005% Total (DINP+DNOP+DIDP)< 0.1%< 0.1%< 0.1%---Note :1. “N.D.” = “Not Detected”2. “<” = “Less than”3. “%” means “percentage by weight”For reference:Entry 51/52 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC)No 1907/2006 (previously restricted under Directive 2005/84/EC):For DBP, BBP, DEHP(1)Shall not be used as substances or in mixtures, in concentrations greater than 0,1 % byweight of the plasticised material, in toys and childcare articles.(2) Toys and childcare articles containing these phthalates in a concentration greater than0,1 % by weight of the plasticised material shall not be placed on the market.For DINP, DNOP, DIDP(1) Shall not be used as substances or in mixtures, in concentrations greater than 0,1 % byweight of the plasticised material, in toys and childcare articles which can be placed in themouth by children.(2) Such toys and childcare articles containing these phthalates in a concentration greater than0,1 % by weight of the plasticised material shall not be placed on the market.Result [mg/kg]Result [mg/kg]001+002+003601 4-aminobiphenyl92-67-102 Benzidine92-87-503 4-chloro-o-toluidine95-69-204 2-naphthylamine91-59-805 o-aminoazotoluene97-56-306 5-nitro-o-toluidine99-55-807 4-chloroaniline106-47-808 2,4-diaminoanisole615-05-4< 5< 509 4,4'-diaminodiphenylmethane101-77-910 3,3'-dichlorobenzidine91-94-111 3,3'-dimethoxylbenzidine119-90-412 3,3'-dimethylbenzidine119-93-713 4,4'-methylenedi-o-toluidine838-88-014 p-cresidine120-71-815 4,4'-methylene-bis-(2-chloro-aniline)101-14-416 4,4'-oxydianiline101-80-417 4,4'-thiodianiline139-65-118 o-toluidine95-53-419 2,4-toluenediamine95-80-7< 5< 520 2,4,5-trimethylaniline137-17-721 4-aminoazobenzene *60-09-322 2-methoxyaniline90-04-023 2,4-xylidine95-68-124 2,6-xylidine87-62-7MethodLimitConclusionNote: 1.“<” = “less than”2. All concentrations express in “mg/kg”(milligram per kilogram), mg/kg ~ ppmVic Zheng。