1832772中文资料

合集下载

1935776资料

Extract from the onlinecatalogPT 2,5/ 2-5,0-HOrder No.: 1935776The figure shows a 10-position version of the producthttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1935776PCB terminal block, nominal current: 32 A, rated voltage: 250 V, pitch: 5.0 mm, number of positions: 2, mounting type: Soldering, connection method: Screw connection, connection direction from the conductor to the PCB: 0°http://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsLength9 mmHeight13.5 mmPitch 5 mmDimension a 5 mmNumber of positions2Pin dimensions1,0 mmPin spacing 5 mmHole diameter 1.3 mmScrew thread M 3Tightening torque, min0.5 NmTechnical dataInsulating material group IRated surge voltage (III/3) 4 kVRated surge voltage (III/2) 4 kVRated surge voltage (II/2) 4 kVRated voltage (III/2)320 VRated voltage (II/2)630 VConnection in acc. with standard EN-VDENominal current I N32 ANominal voltage U N250 VNominal cross section 4 mm2Maximum load current32 A (current values dependent on no. of pos., dimensioning ofprinted circuits, and ambient temperature)Insulating material PAInflammability class acc. to UL 94V0Internal cylindrical gage A3 / B3Stripping length 6.5 mmConnection dataConductor cross section solid min.0.5 mm2Conductor cross section solid max. 4 mm2Conductor cross section stranded min.0.5 mm2Conductor cross section stranded max. 4 mm2Conductor cross section stranded, with ferrule0.5 mm2without plastic sleeve min.Conductor cross section stranded, with ferrule2.5 mm2without plastic sleeve max.Conductor cross section stranded, with ferrule0.5 mm2with plastic sleeve min.Conductor cross section stranded, with ferrulewith plastic sleeve max.2.5 mm2Conductor cross section AWG/kcmil min.20 Conductor cross section AWG/kcmil max102 conductors with same cross section, solid min.0.5 mm22 conductors with same cross section, solid max. 1.5 mm2 2 conductors with same cross section, strandedmin.0.5 mm22 conductors with same cross section, strandedmax.1.5 mm22 conductors with same cross section, stranded,ferrules without plastic sleeve, min.0.5 mm22 conductors with same cross section, stranded, ferrules without plastic sleeve, max.0.75 mm2 The technical data regarding clamping with ferrules applies only when using crimping pliers ZA 3. When using ferrules, it is necessary to take into account possible restrictions regarding nominal voltage.2 conductors with same cross section, stranded,TWIN ferrules with plastic sleeve, min.0.5 mm22 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max.1.5 mm2 The technical data regarding clamping with ferrules applies only when using crimping pliers ZA 3. When using ferrules, it is necessary to take into account possible restrictions regarding nominal voltage.Certificates / ApprovalsCULNominal voltage U N300 V Nominal current I N20 A AWG/kcmil20-12ULNominal voltage U N300 V Nominal current I N20 A AWG/kcmil20-12 Certification CUL, ULAccessoriesItem Designation DescriptionMarking0804183SK 5/3,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 12 identicaldecades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for120 terminal blocksTools1205053SZS 0,6X3,5Screwdriver, bladed, matches all screw terminal blocks up to 4.0mm² connection cross section, blade: 0.6 x 3.5 mm, without VDEapprovalDrawingsDrilling diagramDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。

广西唐皇国际贸易有限公司介绍企业发展分析报告模板

Enterprise Development专业品质权威Analysis Report企业发展分析报告广西唐皇国际贸易有限公司免责声明:本报告通过对该企业公开数据进行分析生成，并不完全代表我方对该企业的意见，如有错误请及时联系;本报告出于对企业发展研究目的产生，仅供参考，在任何情况下，使用本报告所引起的一切后果，我方不承担任何责任:本报告不得用于一切商业用途，如需引用或合作，请与我方联系:广西唐皇国际贸易有限公司1企业发展分析结果1.1 企业发展指数得分企业发展指数得分广西唐皇国际贸易有限公司综合得分说明：企业发展指数根据企业规模、企业创新、企业风险、企业活力四个维度对企业发展情况进行评价。

该企业的综合评价得分需要您得到该公司授权后，我们将协助您分析给出。

1.2 企业画像类别内容行业空资质空产品服务理一般经营项目和技术的进出口业务（国家禁止1.3 发展历程2工商2.1工商信息2.2工商变更2.3股东结构2.4主要人员2.5分支机构2.6对外投资2.7企业年报2.8股权出质2.9动产抵押2.10司法协助2.11清算2.12注销3投融资3.1融资历史3.2投资事件3.3核心团队3.4企业业务4企业信用4.1企业信用4.2行政许可-工商局4.3行政处罚-信用中国4.4行政处罚-工商局4.5税务评级4.6税务处罚4.7经营异常4.8经营异常-工商局4.9采购不良行为4.10产品抽查4.11产品抽查-工商局4.12欠税公告4.13环保处罚4.14被执行人5司法文书5.1法律诉讼（当事人）5.2法律诉讼（相关人）5.3开庭公告5.4被执行人5.5法院公告5.6破产暂无破产数据6企业资质6.1资质许可6.2人员资质6.3产品许可6.4特殊许可7知识产权7.1商标7.2专利7.3软件著作权7.4作品著作权7.5网站备案7.6应用APP7.7微信公众号8招标中标8.1政府招标8.2政府中标8.3央企招标8.4央企中标9标准9.1国家标准9.2行业标准9.3团体标准9.4地方标准10成果奖励10.1国家奖励10.2省部奖励10.3社会奖励10.4科技成果11土地11.1大块土地出让11.2出让公告11.3土地抵押11.4地块公示11.5大企业购地11.6土地出租11.7土地结果11.8土地转让12基金12.1国家自然基金12.2国家自然基金成果12.3国家社科基金13招聘13.1招聘信息感谢阅读:感谢您耐心地阅读这份企业调查分析报告。

2732资料

● Pinout configuration: 16 dual-in-line pins with 35mm spacing and 5mm pitch
● The ferrite core is a slim EE50-type, leading to a maximum transformer height of 28mm above the PCB
38.1
18.5 25 20 15 15 16.25 16.25 15 20 16.25 20.32 20.32 27
Pitch Power Input (mm) @ 50 kHz (W)
7.5
30
5
40
4
40
5
40
5
40
5
60
5
90
5
190
5
250
5
130
4
40
4
40
5
60
5
90
5
120
5
200
5
● Maximum horizontal dimensions: 51mm x 52mm
Options
● Customized electrical design and pinout
SLOT SMT 100
Series 2642 – Resonant-Type Power Supply Switch-Mode Transformer
SWITCH-MODE TRANSFORMER GUIDE BY TECHNOLOGY
Ferrite
E30/15/7 ETD29X16X10 ETD29X15X10 ETD29X11X10 ETD34X13X11 ETD34X17X11 ETD39X17X13 ER48X18X18 ER54X20X18

ATT7022中文资料

2、引脚描述引脚标识 1 RESET 2 SIG
3,4 6,7 9,10 5 11 13,14 16,17 19,20 24 26 27
V1P/V1N V3P/V3N V5P/V5N REFCAP REFOUT V2P/V2N V4P/V4N V6P/V6N TEST SEL CF1
28
CF2
35 36 37 38 40
RESET 1 SIG V1P V1N
2 3 4
33 VDD 32 NC 31 NC 30 NC
REFCAP 5 V3P 6 V3N AGND V5P
7 8 9
ATT7022
29 NC 28 CF2 27 CF1 26 SEL 25
NC
V5N 10 REFOUT 11
12 13 14 15 16 17 18 19 20 21 22
24 TEST 23 GND
A V C C
V V 2 2 P N
A V V G 4 4 N P N D
A V C C
V 6 P
V 6 N
N C
N C
第 5 页共 32 页

珠海炬力集成电路设计有限公司
Actions Semiconductor Co., Ltd.
时间
复位
运行
复位
片内电源监控特性 §2.2 模数转换 ATT7022 片内集成了 6 路 16 位的 ADC，采用双端差分信号输入。最大输入电压是 1.5v，即可以输入最大的正弦信号有效值是 1v。建议将电压通道 Un 对应到 ADC 的输入选在 0.5v 左右，而电流通道 Ib 时的 ADC 输入选在 0.1v 左右。 ADC 内部结构图：
第 3 页共 32 页

2SK2973中文资料

PO, add, t VS. VDD
95 90 PO 85 80 75 70 65 60 ηadd 55 50 45 40 6 7 8 9 35 10 11 12 13
ηt
0
2
INPUT POWER Pin (dBm)
DRAIN SUPPLY VOLTAGE VDD(V)
EQUIVALENT CIRCUIT
OUTLINE DRAWING
4.6MAX 1.6±0.2
Dimensions in mm 1.5±0.1
FEATURES
• High power gain:Gpe≥13dB @VDD=9.6V,f=450MHz,Pin=17dBm • High efficiency:55% typ. • Source case type SOT-89 package (connected internally to source)
S11 -28.167 -52.309 -71.057 -85.910 -97.535 -106.770 -114.312 -120.895 -126.479 -131.266 -136.032 -140.107 -144.290 -148.279 -151.821 -155.417 -159.212 -162.934 -166.562 -170.178 -173.594 -177.132 179.157 175.539 172.187 169.041 165.082 162.211 158.932 155.796 0.014 0.023 0.028 0.030 0.030 0.030 0.028 0.031 0.032 0.037 0.043 0.050 0.059 0.069 0.079 0.091 0.102 0.116 0.128 0.142 0.155 0.168 0.182 0.195 0.208 0.221 0.233 0.243 0.255 0.264

MC1723中文资料

Figure 7. Load Regulation Characteristics With Current Limiting
TA = –55°C RSC = 10 Ω TA = + 25°C TA = + 125°C
–0.3 –0.4 0 20
–0.2
0
5.0
10 15 20 IO, OUTPUT CURRENT (mA)
ELECTRICAL CHARACTERISTICS (TA = +25°C, Vin 12 Vdc, VO = 5.0 Vdc, IL = 1.0 mAdc, RSC = 0, C1 = 100 pF, Cref = 0 and divider
impedance as seen by the error amplifier ≤ 10 kΩ connected as shown in Figure 2, unless otherwise noted.) Characteristics Input Voltage Range Output Voltage Range Input–Output Voltage Differential Reference Voltage Standby Current Drain ( IL = 0, Vin = 30 V) Output Noise Voltage (f = 100 Hz to 10 kHz) Cref = 0 Cref = 5.0 µF Average Temperature Coefficient of Output Voltage (Tlow < TA < Thigh) Line Regulation 12 V < Vin < 15 V 12 V < Vin < 40 V (Tlow < TA < Thigh) 12 V < Vin < 15 V (TA = 25°C) Load Regulation (1.0 mA < IL < 50 mA) TA = 25°C Tlow < TA < Thigh Ripple Rejection (f = 50 Hz to 10 kHz) Cref = 0 Cref = 5.0 µF Short Circuit Current Limit (RSC = 10 Ω, VO = 0) Long Term Stability

1729173资料

Extract from the onlinecatalogMKDSN 1,5/ 7-5,08Order No.: 1729173The figure shows a 10-position version of the producthttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1729173Printed circuit terminal block, nominal current: 13.5 A, rated voltage: 250 V, pitch: 5.08 mm, no. of positions: 7, mounting: Soldering, type of connection: Screw connection, connection direction from the conductor to the PCB: 0°http://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch 5.08 mmDimension a30.48 mmNumber of positions7Pin dimensions0,5 x 1 mm Hole diameter 1.3 mm Screw thread M 3 Tightening torque, min0.5 NmTechnical dataInsulating material group IRated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/2)400 V Rated voltage (II/2)630 V Connection in acc. with standard EN-VDE Nominal current I N13.5 A Nominal voltage U N250 V Nominal cross section 1.5 mm2 Maximum load current13.5 A Insulating material PA Inflammability class acc. to UL 94V0 Internal cylindrical gage A1 Stripping length 6 mmConnection dataConductor cross section solid min.0.14 mm2 Conductor cross section solid max. 1.5 mm2 Conductor cross section stranded min.0.14 mm2 Conductor cross section stranded max. 1.5 mm2 Conductor cross section stranded, with ferrule0.25 mm2 without plastic sleeve min.Conductor cross section stranded, with ferrule1.5 mm2 without plastic sleeve max.Conductor cross section stranded, with ferrule0.25 mm2 with plastic sleeve min.Conductor cross section stranded, with ferrule1.5 mm2 with plastic sleeve max.Conductor cross section AWG/kcmil min.26 Conductor cross section AWG/kcmil max162 conductors with same cross section, solid min.0.14 mm22 conductors with same cross section, solid max.0.75 mm22 conductors with same cross section, stranded0.14 mm2min.2 conductors with same cross section, stranded0.75 mm2max.2 conductors with same cross section, stranded,0.25 mm2ferrules without plastic sleeve, min.2 conductors with same cross section, stranded,0.5 mm2ferrules without plastic sleeve, max.2 conductors with same cross section, stranded,0.5 mm2TWIN ferrules with plastic sleeve, min.2 conductors with same cross section, stranded,1 mm2TWIN ferrules with plastic sleeve, max.Certificates / ApprovalsCSANominal voltage U N300 VNominal current I N10 AAWG/kcmil28-14CULNominal voltage U N300 VNominal current I N10 AAWG/kcmil30-14ULNominal voltage U N300 VNominal current I N10 AAWG/kcmil30-14Certification CB, CCA, CSA, CUL, GL, GOST, SEV, ULAccessoriesItem Designation DescriptionMarking1051993B-STIFT Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm0804293SK 5,08/3,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 12 identicaldecades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for120 terminal blocks0805085SK 5,08/3,8:SO Marker card, special printing, self-adhesive, labeled acc. tocustomer requirements, 12 identical marker strips per card, max.25-position labeling per strip, color: white0805412SK 5,08/3,8:UNBEDRUCKT Marker cards, unprinted, with pitch divisions, self-adhesive, 10-section marker strips, 12 strips per card, can be labeled with theM-PENTools1205053SZS 0,6X3,5Screwdriver, bladed, matches all screw terminal blocks up to 4.0mm² connection cross section, blade: 0.6 x 3.5 mm, without VDEapprovalDrawingsDrilling diagramDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。

1935187资料

Extract from the online catalogThe illustration shows a 15-position version Printed circuit terminal block, nominal current: 16 A, rated voltage: 250 V, pitch: 5.0 mm, no. of positions: 4, mounting: Soldering, type of connection: Screw connection, connection direction from the conductor to the PCB: 0°Order No.1935187Ord designation PT 1,5/ 4-5,0-H Catalog page information Page 308 (CC-2005) Technical dataTightening torque, min 0.4 NmTechnical dataInsulating material group IRated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/2) 320 V Rated voltage (II/2) 630 V Connection in acc. with standard EN-VDE16 A Nominal current IN250 V Nominal voltage UNNominal cross section 1.5 mm²Maximum load current 16 A Insulating material PA Inflammability class acc. to UL 94 V0 Internal cylindrical gage A1 Stripping length 5 mm Connection dataConductor cross section, rigid min. 0.2 mm²Conductor cross section, rigid max. 2.5 mm²Conductor cross section flexible min. 0.2 mm²Conductor cross section, flexible max. 2.5 mm²0.25 mm²Conductor cross section flexible, with ferrule withoutplastic sleeve min.Conductor cross section flexible, with ferrule without1.5 mm²plastic sleeve max.0.25 mm²Conductor cross section flexible, with ferrule with plasticsleeve min.1.5 mm²Conductor cross section flexible, with ferrule with plasticsleeve max.Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 142 conductors with same cross section, solid min. 0.2 mm²2 conductors with same cross section, solid max. 0.75 mm²2 conductors with same cross section, flexible, min. 0.2 mm²2 conductors with same cross section, flexible max. 0.75 mm²0.25 mm²2 conductors with same cross section, flexible, ferruleswithout plastic sleeve min.0.34 mm²2 conductors with same cross section, flexible, ferruleswithout plastic sleeve, max.2 conductors with same cross section, flexible, TWIN0.5 mm²ferrules with plastic sleeve, min.2 conductors with identical cross section, flexible TWIN0.75 mm²ferrules with plastic sleeve, max.CertificatesCUL300 V Nominal voltage UNNominal current I10 ANAWG/kcmil 26-12 Nominal voltage U300 VNNominal current I15 ANAWG/kcmil 26-12300 V Nominal voltage UN16 A Nominal current INAWG/kcmil 26-12 UL300 V Nominal voltage UNNominal current I10 ANAWG/kcmil 26-12300 V Nominal voltage UNNominal current I15 ANAWG/kcmil 26-12300 V Nominal voltage UNNominal current I16 ANAWG/kcmil 26-12Drawings Drilling diagramDimensioned drawingApproval logoAccessoriesItem Designation DescriptionMarking0804183SK 5/3,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 12 identicaldecades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for120 terminal blocksTools1205053SZS 0,6X3,5Screwdriver, bladed, matches all screw terminal blocks up to 4.0mm² connection cross section, blade: 0.6 x 3.5 mm, without VDEapprovalAddressPHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 832825 BlombergGermanyPhone +49 5235 3 00Fax +49 5235 3 41200 Phoenix ContactTechnical modifications reserved;。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

Extract from the onlinecatalogMCVK 1,5/ 6-G-3,81Order No.: 1832772The illustration shows a 16-position versionhttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1832772Header, nominal current: 8 A, rated voltage: 160 V, pitch: 3.81 mm, no.of positions: 6, mounting: Mounting railhttp://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch 3.81 mmNumber of positions6Screw thread M 2Tightening torque, min0.22 NmTechnical dataInsulating material group IRated surge voltage (III/3) 2.5 kV Rated surge voltage (III/2) 2.5 kV Rated surge voltage (II/2) 2.5 kV Rated voltage (III/2)160 V Rated voltage (II/2)320 V Connection in acc. with standard EN-VDE Nominal current I N8 A Nominal voltage U N160 V Nominal cross section 1.5 mm2 Insulating material PA Inflammability class acc. to UL 94V0 Internal cylindrical gage A1 Stripping length7 mmConnection data2 conductors with same cross section, solid min.0.14 mm2 2 conductors with same cross section, solid max.0.5 mm2 2 conductors with same cross section, stranded0.14 mm2 min.2 conductors with same cross section, stranded0.75 mm2 max.2 conductors with same cross section, stranded,0.25 mm2 ferrules without plastic sleeve, min.2 conductors with same cross section, stranded,0.34 mm2 ferrules without plastic sleeve, max.2 conductors with same cross section, stranded,0.5 mm2 TWIN ferrules with plastic sleeve, min.2 conductors with same cross section, stranded,0.5 mm2 TWIN ferrules with plastic sleeve, max.Certificates / ApprovalsApproval logoCSANominal voltage U N300 VNominal current I N8 AAWG/kcmil28-16CULNominal voltage U N300 VNominal current I N8 AAWG/kcmil30-14ULNominal voltage U N300 VNominal current I N8 AAWG/kcmil30-14Certification CSA, CUL, ULAccessoriesItem Designation DescriptionMarking0804109SK 3,81/2,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 10-section markerstrip, 14 identical decades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for 140 terminal blocksPlug/Adapter1734634CP-MSTB Coding profile, is inserted into the slot on the plug or invertedheader, red insulating materialTools1205037SZS 0,4X2,5Screwdriver, bladed, matches all screw terminal blocks up to 1.5mm² connection cross section, blade: 0.4 x 2.5 mmAdditional productsItem Designation DescriptionGeneral1851083FK-MCP 1,5/ 6-ST-3,81Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.81 mm, no. of positions: 6, type of connection: Spring-cageconnection1850709FRONT-MC 1,5/ 6-ST-3,81Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.81 mm, no. of positions: 6, type of connection: Screw connection 1862616IMC 1,5/ 6-G-3,81Header, nominal current: 8 A, rated voltage: 160 V, pitch: 3.81mm, no. of positions: 6, mounting: Soldering1875467IMCV 1,5/ 6-G-3,81Header, nominal current: 8 A, rated voltage: 160 V, pitch: 3.81mm, no. of positions: 6, mounting: Soldering1803617MC 1,5/ 6-ST-3,81Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.81 mm, no. of positions: 6, type of connection: Screw connection 1852215MCC 1/ 6-STZ-3,81Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.81 mm, no. of positions: 6, type of connection: Crimp connection 1827169MCVR 1,5/ 6-ST-3,81Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.81 mm, no. of positions: 6, type of connection: Screw connection 1827017MCVW 1,5/ 6-ST-3,81Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.81 mm, no. of positions: 6, type of connection: Screw connection 1897432QC 0,5/ 6-ST-3,81Plug, nominal current: 6 A, rated voltage: 320 V, pitch: 3.81mm, number of positions: 6, connection method: Insulationdisplacement connection QUICKONDrawingsDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。