AT080TN64
艾特顿180701 Catalog Number：180701 Eaton DE11可变速启动器说明
Eaton 180701Eaton DE11 Variable speed starters, Rated operational voltage 400V AC, 3-phase, Ie 5 A, 2.2 kW, 3 HP, Radio interferencesuppression filter DE11-345D0FN-N20NN01General specificationsProduct Name Catalog NumberEaton DE11 Variable speed starter180701EAN Product Length/Depth4015081758661169 mmProduct Height Product Width230 mm90 mmProduct Weight Certifications1.6 kg IEC/EN 61800-3Specification for general requirements:IEC/EN 61800-2Safety requirements: IEC/EN 61800-5-1Catalog Notes Model CodeOverload cycle for 60 s every 600 s DE11-345D0FN-N20NN01Parameterization: Keypad Parameterization: Fieldbus Parameterization: drivesConnect Parameterization: drivesConnect mobile (App)Radio interference suppression filter C1 ≤ 5 m, Radio interference level, maximum motor cable lengthC3 ≤ 25 m, Radio interference level, maximum motor cable lengthC2 ≤ 10 m, Radio interference level, maximum motor cable lengthOP-Bus (RS485), built inModbus RTU, built inCANopen®, built inYesIn conjunction with DX-NET-SWD3 SmartWire DT moduleIP20NEMA Other1st and 2nd environments (according to EN 61800-3)FS2Variable speed starterFinger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)Other bus systemsEtherNet/IPMODBUSC1: for conducted emissions onlyC2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.15 g, Mechanical, According to IEC/EN 60068-2-27, 11 msBranch circuits, (UL/CSA)FeaturesFitted with:Cable lengthCommunication interfaceConnection to SmartWire-DTDegree of protectionElectromagnetic compatibilityFrame sizeProduct categoryProtectionProtocolRadio interference classShock resistanceSuitable forResistance: According to EN 61800-5-1Above 1000 m with 1 % derating per 100 mMax. 2000 m-10 °C60 °C-40 °C70 °C< 95 average relative humidity (RH), no condensation, nocorrosion7 A< 3.5 mA (AC-operated)< 10 mA (DC-operated)Maximum of one time every 30 seconds380 V480 VSpeed control with slip compensation U/f control0 Hz300 Hz 4.8 A5 A5 A4.8 A3 HP3 HP3.46 kVA4.16 kVAVibrationAltitudeAmbient operating temperature - minAmbient operating temperature - maxAmbient storage temperature - minAmbient storage temperature - maxClimatic proofingInput current ILN at 150% overload Leakage current at ground IPE - max Mains switch-on frequencyMains voltage - minMains voltage - maxOperating modeOutput frequency - minOutput frequency - maxOutput voltage (U2)Assigned motor current IM at 220 - 240 V, 60 Hz, 150% overload Assigned motor current IM at 230 V, 50 Hz, 150% overload Assigned motor current IM at 400 V, 50 Hz, 150% overload Assigned motor current IM at 440 - 480 V, 60 Hz, 150% overload Assigned motor power at 230/240 V, 60 Hz, 1-phaseAssigned motor power at 460/480 V, 60 Hz, 3-phaseApparent power at 400 VApparent power at 480 V400 V AC, 3-phase 480 V AC, 3-phase7.5 A10 V DC (Us, max. 0.2 mA)45 Hz66 Hz5 A at 150% overload (at an operating frequency of 16 kHz and an ambient air temperature of +50 °C)2.2 kW2.2 kW0.03 Hz (Frequency resolution, setpoint value)15 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring200 %, IH, max. starting current (High Overload), For 1.875 seconds every 600 seconds, Power section50/60 Hz16 kHz, 4 - 32 kHz adjustable (audible), fPWM, Power section, Main circuit480 V Max. 30 % MN, Standard - Main circuitAdjustable to 100 %, DC - Main circuit1 (parameterizable, 0 - 10 V DC, 0/4 - 20 mA)4 (parameterizable, 10 - 30 V DC)1 (parameterizable, N/O, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))65 W0 W0 W5 A0 WOperation (with 150 % overload)Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Overload current IL at 150% overloadRated control supply voltageRated frequency - minRated frequency - maxRated operational current (Ie)Rated operational power at 220/230 V, 50 Hz, 1-phase Rated operational power at 380/400 V, 50 Hz, 3-phase ResolutionShort-circuit protection ratingStarting current - maxSupply frequencySwitching frequencyVoltage rating - max Braking torqueNumber of inputs (analog)Number of inputs (digital)Number of outputs (analog)Number of relay outputsEquipment heat dissipation, current-dependent PvidHeat dissipation capacity PdissHeat dissipation per pole, current-dependent PvidRated operational current for specified heat dissipation (In) Static heat dissipation, non-current-dependent PvsHeat dissipation details10.2.2 Corrosion resistance10.2.3.1 Verification of thermal stability of enclosures10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard's requirements.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Starting, Stopping and OperationElectromagnetic compatibility (EMC)Access to Parameter Level 2 Parameter Lock Load Default Quick-Start-Guide DE11 (english)I/O ConfigurationConnecting drives to generator suppliesMotor data Motor Protection V/f curves Slip CompensationSet point settingConformal CoatingFire modeQuick-Start-Guide DE1 (english)Start, Stopp und BetriebHow does the internal motor protection work?The OP System Bus - Parameterizing - ControlDX-COM-STICK3_ConnectionUpdate DX-COM-STICK3HVAC, water/wastewater and industrial mediums - brochure Number 1 in efficiency The easiest way of variable motor speed PowerXL DE1 Variable Speed StarterDA-SW-drivesConnect - installation helpDA-SW-Codesys 3 SWD for DC1 and DE1DA-SW-DE11 CANopen ConfigFile 203DA-SW-DE11 CANopen ConfigFile 210DA-SW-Driver DX-CBL-PC-3M0DA-SW-Codesys 2 SWD for DC1 and DE1DA-SW-drivesConnect - InstallationshilfeDA-SW-USB Driver PC Cable DX-CBL-PC-1M5DA-SW-DE11 CANopen CODESYS2 LibraryDA-SW-DE1 ModbusRTU V1_00 LibraryDA-SW-drivesConnectDA-SW-DE11 CANopen CODESYSV3 LibraryDA-SW-USB Driver DX-COM-STICK3-KITDA-SW-drivesConnect USB Driver DX-COM-PCKITProduct Range Catalog Drives Engineering10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects10.2.4 Resistance to ultra-violet (UV) radiation10.2.5 Lifting10.2.6 Mechanical impact10.2.7 Inscriptions10.3 Degree of protection of assemblies10.4 Clearances and creepage distances10.5 Protection against electric shock10.6 Incorporation of switching devices and components 10.7 Internal electrical circuits and connections10.8 Connections for external conductors10.9.2 Power-frequency electric strength10.9.3 Impulse withstand voltage10.9.4 Testing of enclosures made of insulating material 10.10 Temperature rise10.11 Short-circuit rating Application notes Brochures CataloguesEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All rights reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaIs the panel builder's responsibility. The specifications for the switchgear must be observed.Is the panel builder's responsibility. The specifications for the switchgear must be observed.The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.Drives - Product range catalogDA-DC-00004551.pdfDA-DC-00004556.pdfeaton-frequency-inverter-dimensions-010.eps eaton-frequency-inverter-3d-drawing-018.epsDA-CE-ETN.DE11-345D0FN-N20NN01IL040005ZUPowerXL DE1 variable speed starterMN040011_ENMN040003_ENMN040019_ENMN040018_ENDA-CD-de1_fs2_ip20DA-CS-de1_fs2_ip2010.12 Electromagnetic compatibility 10.13 Mechanical function Certification reports DrawingseCAD model Installation instructions Installation videos Manuals and user guidesmCAD model。
北京单片机八路模拟开关板芯片型号
北京单片机八路模拟开关板芯片型号一、引言北京单片机八路模拟开关板是一种常用的电子元器件，它能够实现对电路的控制和监测。
本文将介绍该开关板的芯片型号及其特点。
二、北京单片机八路模拟开关板概述北京单片机八路模拟开关板是一种具有8个模拟输入通道和8个数字输出通道的电子元器件。
它可以用于模拟信号采集、温度测量、压力测量等领域。
该开关板采用了高精度ADC芯片和可编程逻辑器件，具有高精度、高速度和可编程性强等特点。
三、芯片型号介绍北京单片机八路模拟开关板采用了TI公司的MSP430F149芯片作为主控芯片，同时还配备了MAX11607 ADC芯片和74HC595数字输出芯片。
1. MSP430F149芯片MSP430F149是TI公司生产的超低功耗16位RISC微控制器，具有512KB闪存和10KB RAM。
该芯片具有多种外设接口，包括UART、I2C、SPI等，并支持多种中断方式。
此外，MSP430F149还具有低功耗模式，在待机状态下功耗仅为0.1μA。
2. MAX11607 ADC芯片MAX11607是Maxim公司生产的12位精度、8通道、模拟输入ADC芯片。
该芯片具有内部参考电压和程序可编程增益，可以适应不同的输入信号范围。
此外，该芯片还具有内部温度传感器和多种电源管理功能。
3. 74HC595数字输出芯片74HC595是一种串行输入、并行输出的移位寄存器，可以实现8位二进制数据的输出。
该芯片采用CMOS技术，具有低功耗、高噪声抑制等特点。
此外，74HC595还支持级联操作，可以扩展输出通道数量。
四、北京单片机八路模拟开关板特点北京单片机八路模拟开关板具有以下特点：1. 高精度该开关板采用了12位精度的ADC芯片和高精度参考电压源，能够实现对模拟信号的高精度采集和处理。
2. 高速度MSP430F149芯片具有16MHz工作频率和快速中断响应能力，能够满足对高速信号的处理需求。
3. 可编程性强MSP430F149芯片支持多种外设接口和中断方式，并具有可编程的闪存和RAM，可以实现对不同应用场景的灵活适应。
AT080TN52 V.1_群创8吋数字屏
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX 1. General Specifications
SPEC NO.: A080-52-TT-12 Date :2008/11/04 Page:1/21
No.
Item
Specification
1 LCD size
8.0 inch(Diagonal)
2 Driver element
a-Si TFT active matrix
3 Resolution
800 × 3(RGB) × 600
4 Display mode
Normally White, Transmissive
INNOLUX DISPLAY CORPORATION
LCD MODULE
S P E C I F I C AT I O N
Customer: Model Name: SPEC NO.: Date: Version:
AT080TN52 V.1 A0 8 0 - 5 2 - T T- 1 2 2008/11/04 01
2008/11/12
2008/11/12
David Lee
2008/11/11
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
InnoLux copyright 2004 All rights reserved, Copying forbidden.
2.1. TFT LCD Panel Driving Section...................................................................................... 2 2.2. Backlight Unit Section..................................................................................................... 5 3. Operation Specifications ......................................................................................................... 6 3.1. Absolute Maximum Rating.............................................................................................. 6
2008年TOYOTA自动变速箱配件目录说明书
402A070034311530510520179209211022046500555229337336965975879565ForwardPlanetSun GearV.B.Parts741765992446995777778#1 Sprag036779940030Bushing Kit006Master W/Steels Kit 004Master L/Steels Kit002OHK Kit4032008 AUTOMATIC TRANSMISSION KIT & COMPONENTS CATALOG©2008 PARKER HANNIFIN CORP . ALL RIGHTS RESERVEDCD964974122564332333972124100144873888665654888584251246594604889894795207263268710268898590184580216661650694867120100039O.Dr. Cover7967122812806996966818950757350752********PinionFE077725290289720716847292076Differential Diff.Parts717G730715O.Dr. Direct Drum9352692693752917862886982008 AUTOMATIC TRANSMISSION KIT & COMPONENTS CATALOG©2008 PARKER HANNIFIN CORP. ALL RIGHTS RESERVED *Prefix Letter ‘T’ denotes Toledo-Trans Kit (TTK) Brand Transmission Kits*Prefix Letter ‘B’ denotes Bryco Brand Transmission Kits002.............T87002A........Overhaul Kit, A540E 1988-93.....................................................................................................1..........002.............B87002A.......Overhaul Kit, A540E 1988-93.....................................................................................................1..........002.............TF87002A......Overhaul Kit, A540E 1988-93 (Fiber Pan Gasket).....................................................................1..........002.............T87002AB.....Overhaul Kit, A540H (Camry AWD & RAV-4 4x4) 1989-Up......................................................1..........002.............B87002AB.....Overhaul Kit, A540H (Camry AWD & RAV-4 4x4) 1989-Up......................................................1..........002.............T87002B........Overhaul Kit, A541E 1994-Up....................................................................................................1..........002.............TF87002B......Overhaul Kit, A541E 1994-Up (Fiber Pan Gasket).....................................................................1..........002.............B87000B........Overhaul Kit, A541E 1994-Up....................................................................................................1..........004.............B87004A.......Master L/Steels Kit, A540E 1988-5/1991...................................................................................1..........004.............B87004A.......Master L/Steels Kit, A540E 6/1991-1993...................................................................................1..........004.............B87004B........Master L/Steels Kit, A541E 1994-Up..........................................................................................1..........006.............B87006AA.....Master W/Steels Kit, A540E 1988-5/1991..................................................................................1..........006.............B87006AA.....Master W/Steels Kit, A540E 6/1991-1993..................................................................................1..........008.............B87008A.......Super Kit, A540E 1988-91..........................................................................................................1..........E300...........24009T..........Gasket, A540 Oil Pan..................................................................................................................1..........35168-32020 E300...........24018............Gasket, A540 Oil Pan ( Fiber).....................................................................................................1..........(35168-32020) E300...........24009AT........Gasket, A541E Oil Pan 1994-Up.................................................................................................1..........35168-33010 E300...........24018A..........Gasket, A541E Oil Pan 1994-Up (Fiber).....................................................................................1..........(35168-33010) C302...........24097482......Gasket, A540 Top Cover............................................................................................................1..........35153-33010 G304..........24097481......Gasket, A540E/A540H Overdrive Cover (Rear Cover) 1988-Up..............................................1..........34112-32040 A311...........1994536........O-Ring, A540 Pump 1988-Up.....................................................................................................1..........90301-99024 E326...........24006............Gasket, A540 Filter 1988-Up......................................................................................................1..........35339-32020 E362...........1994137........O-Ring, A540 Servo Cover 1988-93..........................................................................................2..........90301-52003 E362...........1994132........O-Ring, A540 Servo Cover 1994-Up.........................................................................................2..........90301-43005 ...................1994584........O-Ring, A540 Filler Tube 1988-Up.............................................................................................1..........90301-09173 ...................1995509........O-Ring, A540 Speed meter Shaft 1988-Up................................................................................1..........96711-24030175.............6142..............Ring Kit, A540 (2 Metal, 8 PTFE).................................................................................................1..........175.............6142OS.........Ring Kit, A540 (2 Metal, 8 PTFE).................................................................................................1..........A177..........30528............Ring, A540 Forward Clutch (PTFE)............................................................................................3..........35712-32010 A179..........TAW-1344.....Ring, A540 Direct Clutch (Metal)................................................................................................2..........35617-16010 E184...........30524............Ring, A540 Intermediate Shaft (PTFE)........................................................................................1..........35748-32010 G185..........30526............Ring, A540 Overdrive Direct Clutch (PTFE)...............................................................................2..........35617-32011 E195...........30537............Ring, A540 2nd Coast Servo (PTFE) 1988-Up...........................................................................1..........35865-32020 E195...........30527............Ring, A541 2nd Coast Servo (PTFE) 1994-Up...........................................................................1..........35865-33010404B100...........24020............Friction, A540 Reverse Clutch (.059") 33 Teeth (5.60"OD)......................................................6-7........35677-32060B100...........24020A..........Friction, A541A Reverse Clutch (.063") 36 Teeth (5.59 OD) 1994-Up.....................................6-7........35677-33040B100...........240022R........Friction, A540 2nd Brake Clutch (.075") 33 Teeth (5.60"OD) 1992-Up.....................................3..........A106..........24026A..........Friction, A540 Forward Clutch (.060") 40 Teeth (5.00"OD) 1992-Up.......................................5..........35633-33010B106...........24028............Friction, A540 Direct Clutch (.083") 40 Teeth (5.20"OD) 1992-Up............................................3..........35633-20010 119.............24080R..........Friction Module A540E 188-91...................................................................................................1.......... 119.............24080............Friction Module A540E 188-91...................................................................................................1.......... 119.............24080AR.......Friction Module A540E 1991-93.................................................................................................1.......... 119.............24080AT........Friction Module A540E 1991-93.................................................................................................1.......... 119.............24080CR........Friction Module, A540H AWD 1989-Up......................................................................................1.......... 119.............24080C..........Friction Module, A540H AWD 1989-Up......................................................................................1.......... 119.............24080BR........Friction Module, A541E 1994-Up................................................................................................1..........A122..........25821C..........Steel, A540 Forward Clutch (.071") 4.10"ID (8 Teeth) 1988-91................................................4..........35634-12040A122..........25821A..........Steel, A540 Forward Clutch (.063") 8 Teeth (4.10"ID) 1992-Up...............................................4..........35634-33010A122..........25821B..........Steel, A540 Forward Clutch (.055") 8 Teeth (4.10"ID) 1992-Up..............................................1-5........35634-33020A122..........24027............Steel, A540 Direct Clutch (.071") 6 Notched Teeth (4.10"ID) 1988-91......................................1..........35634-32020A122..........24027A..........Steel, A540 Direct Clutch (.055") 6 Teeth (4.10"ID) 1992-Up....................................................1..........35634-33030A122..........24027B..........Steel, A540 Direct Clutch (.079") 6 Teeth (3 Teeth Are Notched) 4.10"ID................................2-3........35647-33020F122...........24021............Steel, A540 Overdrive Direct Clutch (.118") 4.10"ID (24 Teeth) 1989-93.................................2..........34615-20010F122...........24021A..........Steel, A541E Overdrive Direct Clutch (.071") 24 Teeth (4.10"ID) 1994-Up...............................2..........34615-33030 ...................25829............Steel, A540 Differential Clutch (.063") 3.60"ID (30 Teeth) 1988-Up..........................................11.........41474-32011B124...........24029............Steel, A540 2nd Brake Clutch (.071") 12 Teeth (4.60"ID) 1988-Up...........................................3..........35648-32030B124...........24025A..........Steel, A541E 2nd Brake Clutch (.071") 10 Teeth (4.86"ID) 1994-Up (Wide Splined)................4..........35648-33010C130...........24029A..........Steel, A541E Reverse Clutch (.063") 10 Teeth (4.86"ID) 1994-Up (Narrow Spline).................6..........35648-33020 139.............24081............Steel Module, A540E 1988-91....................................................................................................1.......... 139.............24081A..........Steel Module, A540E 1991-93....................................................................................................1.......... 139.............24081C..........Steel Module, A540H AWD 1989-Up..........................................................................................1.......... 139.............24081B..........Steel Module, A541E 1994-Up....................................................................................................1..........E010...........25842B..........Filter, A540E/A540H 1988-Up.....................................................................................................1..........E010...........24040B..........Filter, A541E 1994-96.................................................................................................................1..........011.............24041............Filter Kit, A540E/A540H 1988-94................................................................................................1.......... 011.............24041A..........Filter Kit, A540E/A540H 1988-94 (Fiber Pan Gasket)................................................................1.......... 011.............24043............Filter Kit, A541E 1994-Up...........................................................................................................1..........G039..........24033............Bushing, A540 Overdrive Direct Drum (Rear)...........................................................................1..........A046..........24032............Bushing, A540 Direct Drum........................................................................................................1..........B050...........24035............Bushing, A540 Input Hub............................................................................................................1..........B052...........24031............Bushing, A540 Sun Gear...........................................................................................................2..........2008 AUTOMATIC TRANSMISSION KIT & COMPONENTS CATALOG©2008 PARKER HANNIFIN CORP. ALL RIGHTS RESERVED4054062008 AUTOMATIC TRANSMISSION KIT & COMPONENTS CATALOG ©2008 PARKER HANNIFIN CORP. ALL RIGHTS RESERVEDE216...........24073............Washer, A540 Overdrive Planet To Overdrive Drum.................................................................1..........34737-3310...................24074............Washer, A540E Planetary Carrier Sun Gear 1988-93...............................................................1..........35739-32020...................24074A..........Washer, A541E Planet Carrier #3 1994-Up................................................................................1..........35739-33010...................24072............Washer, A540E Planetary Carrier Front 1988-93......................................................................1..........35738-32020...................24072A..........Washer, A541E Planetary# 2 1994-Up ......................................................................................1..........35738-33020...................24071............Washer,A540E Planetary Carrier Rear 1988-93.......................................................................1..........35738-32030...................24071A..........Washer, A541E Planetary# 3 1994-Up ......................................................................................1..........35738-33010E425...........S-151.............Solenoid, A540 Lock-Up 1988-..................................................................................................1..........85420-32110E425...........89758............Solenoid, A540E, A540H Lock Up 1989-Up ...............................................................................1..........85420-32110E425...........S-118.............Solenoid, A541E Lock-Up 1994-04 OEM....................................................................................1..........35240-33010E420...........S-152.............Solenoid, A540E Shift 1, 2 1988-...............................................................................................1..........85420-32091E420...........89757............Solenoid, A540E, A540H Shift 1988-93.....................................................................................1..........85420-32091E420...........S-110.............Solenoid, A541E Shift 1, 2 1994- OEM.......................................................................................1..........85420-33010E420...........89757A..........Solenoid, A541E Shift 1994-Up ..................................................................................................1..........85420-33010B642...........24085............Sprag Assembly, A540 (4 1/2"OD).............................................................................................1..........35790-320312008 AUTOMATIC TRANSMISSION KIT & COMPONENTS CATALOG©2008 PARKER HANNIFIN CORP. ALL RIGHTS RESERVED407。
华中8型全数字高档数控系统选型手册说明书
全数字高档数控系统选型手册华中8型武汉东湖高新技术开发区庙山小区华中科技大学科技园电话（Tel ）：027-********传真（Fax ）：027-********邮政编码（P .C ）：430223E -mail:*****************公司微信公众号二维码400-999-0861800-880-0598本画册内容如有变更，恕不另行通知公司简介华中８型全数字总线式数控系统是华中数控通过自主创新，瞄准国际水平自主开发的全新产品。
已形成HNC -848、HNC -818、HNC -808三个系列的产品。
目前，华中8型数控系统已实现数千台销售。
其中，既包括量大面广的数控车床、车削中心、数控铣床、立式加工中心、卧式加工中心、钻攻中心等中、高档数控机床，还包括与重大专项配套的几百台高档数控机床，产品覆盖十余类规格的机型，是配套最多的国产高档数控系统。
CompanyIntroduction先进的ＳＭＴ生产线可靠的三防设备检测室完善的系统综合环境测试室一流的产品研发平台一流的数控系统生产平台一流的数控系统应用验证平台一流的数控系统综合测试平台一流的系统可靠性试验平台目 录Contents※ 1 华中※ 2 连接示意图※3 技术规格一览表※ 4 接口示意图※ 5 接口定义※ 6 安装尺寸图※ 7 订货信息一、数控系统………………………………………………………………………………………………………………………………………………………………………………………………二、数字交流伺服驱动单元※ 1 HSV-120全数字总线式模块化伺服驱动单元※ 2 HSV-180U全数字总线式交流伺服驱动单元※ 3 HSV-160U全数字总线式交流伺服驱动单元三、交流伺服电机及伺服主轴电机※ 1 GK6系列交流永磁伺服电机※ 3 GM7系列交流伺服主轴电机※ 2 ST系列交流永磁伺服电机※4 晟昌SVM 系列伺服主轴电机………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………四、数控系统其它附件※1 系统选件（IO、UPS、手摇）…………………………………………………………………………………………………………五、推荐配置方案※ 3 数控车床推荐配置※ 4 数控铣床 / 加工中心推荐配置※1 五轴联动高速加工中心推荐配置※2 高速钻攻中心推荐配置………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… (85)HNC-808HNC-808eHNC-818AHNC-818BHIO-1000-250/300/450-020/030-035/050/075-100/150/200适配电机：1～2Kw GZ8H-GM7GM8STGK8HNC-848※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息HSV-180UX2※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息HNC-808系列数控装置接口图-背面●XS6：NCUC总线接口●XS8：手持单元接口●XT1：外部电源开、电源关、急停接口※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息X1：DC24V电源接口（5.08/90F/3P）3 13 1※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ 接口示意图※ 接口定义※ 安装尺寸图※ 订货信息※ HSV-160U全数字总线式交流伺服驱动单元二、 数字交流伺服驱动单元※ HSV-120全数字总线式模块化伺服驱动单元※ HSV-180U全数字总线式交流伺服驱动单元※ HSV-160U全数字总线式交流伺服驱动单元二、 数字交流伺服驱动单元※ HSV-120全数字总线式模块化伺服驱动单元※ HSV-180U全数字总线式交流伺服驱动单元XS1电机编码器输入接口插座（面对插座看）XS1电机编码器输入接口插头（面对插头看）※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机A型键B型键C型键※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机※晟昌SVM 系列伺服主轴电机■ 精密定转子槽形设计，马达在定位控制时，快速平滑，不会因突波磁场而产生跳动情形，以上是变频马达所没有的特性晟昌SVM-90伺服主轴电机※晟昌SVM 系列伺服主轴电机※ GM7系列交流伺服主轴电机三、 交流伺服电机及伺服主轴电机※ GK6系列交流永磁伺服电机※ ST系列交流永磁伺服电机※晟昌SVM 系列伺服主轴电机※ GM7系列交流伺服主轴电机三、 交流伺服电机及伺服主轴电机※ GK6系列交流永磁伺服电机※ ST系列交流永磁伺服电机四、 数控系统其它附件※ 系统选件（IO、UPS、手摇）※ 晟昌SVM 系列伺服主轴电机※ GM7系列交流伺服主轴电机三、 交流伺服电机及伺服主轴电机※ GK6系列交流永磁伺服电机※ ST系列交流永磁伺服电机※ 数控铣床 / 加工中心推荐配置※ 数控铣床 / 加工中心推荐配置※ 数控铣床 / 加工中心推荐配置※ 数控铣床 / 加工中心推荐配置注：HSV-180U型号伺服驱动接三相380V电源，HSV-160U型号伺服驱动接三相220V电源。
SST38LF6401RT 4M ×16 CMOS Advanced Multi-Purpose F
SummaryThe SST38LF6401RT is a 4M ×16 CMOS Advanced Multi-Purpose Flash Plus (Advanced MPF+) upgraded for space applications. It is manufactured with SST proprietary, high-performance CMOS SuperFlash ® technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. The SST38L-F6401RT writes (program or erase) with a 3.0V to 3.6V power supply. This device conforms to JEDEC standard pin assignments for ×16 memories.SST38LF6401RT Parallel Rad Tolerant Flash MemoryFeatures• Density: 64 Mbit• Read access time: 90 ns • Page size (bytes): 8• Temperature range: –55°C to +125°C • Endurance: 10,000 cycles • Organized as 4M ×16• Single voltage read and write operations : 3.0V to 3.6V • Superior reliability, endurance: up to 10,000 cycles mini-mum, greater than 100 years data retention•Low-power consumption (typical values at 5 MHz)• Active current: 4 mA (typical)• Standby current: 3 µA (typical)• Auto low-power mode: 3 µA (typical)• 128-bit unique ID• Security-ID feature, 256 word, user one-time programmable• Protection and security features, hardware boot block protection/WP# input• Hardware Reset Pin (RST#)•Fast read and page read access times: 90 ns page read access times, 4-word page read buffer• Latched address and data• Fast erase times: sector-erase time: 18 ms (typical), block-erase time: 18 ms (typical), chip-erase time: 40 ms (typical)• Erase-suspend/resume capabilities• Fast word and write-buffer programming times:• Word-program time: 7 µs (typical)• Write buffer programming time: 1.75 µs/word(typical)• 16-word write buffer• Automatic write timing: internal V pp generation• End-of-write detection, toggle bits, data# polling, ry/by# output• CMOS I/O compatibility• JEDEC standard, Flash EEPROM pinouts and command sets• Pin, uniform (32 KWord) and non-uniform (8 KWord) op-tions available, user-controlled individual block (32 KWord) protection, using software only methods • Password protection • CFI Compliant•Packages available: 48-lead TSOP ceramic or plasticThe Microchip name and logo, the Microchip logo and SuperFlash are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their respective companies.© 2020, Microchip Technology Incorporated. All Rights Reserved. 11/20 DS00003649AWhat is SuperFlash Technology?SuperFlash Technology is an innovative, highly reliable and versatile type of NOR Flash memory invented by Silicon Storage Technology (SST, which is owned by Microchip). SuperFlash memory is much more flexible and reliable than competing non-volatile memories. This technology utilizes a split-gate cell architecture which uses a robust thick-oxide process that requires fewer mask steps resulting in a lower-cost nonvolatile memory solution with excellent data retention and higher reliability.Advantages of SuperFlash Technology• Fast, fixed program and erase times (typical chip-erase time: 40 ms)• No pre-programming or verify required prior to erase (Results in significantly lower power consumption)• Superior reliability (10K cycles and 100 years data retention)• Inherent small sector size (4 KB erase sector vs. 64 KB), results in faster re-write operations and contributes to lowering overall power consumptionSpace Environment• Full wafer lot traceability• 48-lead hermetic ceramic dual flat package (CDFP)• Space-grade screening and qualification (QML and ESCC flow)• T otal ionizing dose: better than 50 Krad, (biased & unbiased) • Heavy ions and protons tested• Single event latch-up immune with a LET > 78 MeV .cm²/mg • Full SEU characterization• No SEU corruption up to 46 MeV .cm²/mgFunctional Block Diagram®。
AT4708~64多路温度测试仪用户手册说明书
Rev.A0AT4708~64多路温度测试仪@安柏®是常州安柏精密仪器有限公司的商标或注册商标。
常州安柏精密仪器有限公司Applent Instruments Ltd.江苏省常州市钟楼区宝龙国际61-3F电话：************* 销售服务电子邮件:*****************技术支持电子邮件:****************©2005-2018 Applent Instruments.声明根据国际版权法，未经常州安柏精密仪器有限公司（Applent Instruments Inc.）事先允许和书面同意，不得以任何形式复制本文内容。
安全信息为避免可能的电击和人身安全，请遵循以下指南进行操作。
免责声明用户在开始使用仪器前请仔细阅读以下安全信息，对于用户由于未遵守下列条款而造成的人身安全和财产损失，安柏仪器将不承担任何责任。
仪器接地为防止电击危险，请连接好电源地线。
不可在爆炸性气体环境使用仪器不可在易燃易爆气体、蒸汽或多灰尘的环境下使用仪器。
在此类环境使用任何电子设备，都是对人身安全的冒险。
不可打开仪器外壳非专业维护人员不可打开仪器外壳，以试图维修仪器。
仪器在关机后一段时间内仍存在未释放干净的电荷，这可能对人身造成电击危险。
不要使用工作异常的仪器如果仪器工作不正常，其危险不可预知，请断开电源线，不可再使用，也不要试图自行维修。
不要超出本说明书指定的方式使用仪器超出范围，仪器所提供的保护措施将失效。
警告：不要加超过350V的直流电压或超过200V的交流电压到测试端，否则会损坏仪器。
安全标志：设备由双重绝缘或加强绝缘保护废弃电气和电子设备(WEEE) 指令2002/96/EC切勿丢弃在垃圾桶内声明：!,$,#,安柏标志和文字是常州安柏精密仪器有限公司的商标或注册商标。
有限担保和责任范围常州安柏精密仪器有限公司（以下简称安柏）保证您购买的每一台仪器在质量和计量上都是完全合格的。
OSN 8800 T64 设备整机硬件
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 10
设备整机硬件安装指导-设置主从子架跳线
备注：主从子 架ID是十六进 制的显示方式
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 11
操作指导：散发到现场的6800机箱或者8800 T32机箱，对于6800机箱，上面贴有A 、B、C、D位置编号，根据机柜上贴有的相应的a、b、c、d位置编号，将机箱安 装在机柜上相对应的位置；对于8800 T32机箱，上面贴有A、B位置编号，根据机柜 上贴有的相应的a、b位置编号，将机箱安装在机柜上相对应的位置
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 8
设备整机硬件安装指导-设备配电
功耗差异点说明：8800 T64型设备单柜满配最大功耗10800W，是8800 T32型设备
单柜满配最大功耗的2倍。根据供配电安全及接入电流场景合理性原则设计，考虑主 备供电要求，8800 T64型设备单机柜满配需要16路电源接入供电，电源接入路数是 8800 T32型设备的2倍
的2倍。为降低搬运难度，发货时将4*6800或2*8800 T32机箱散发现场安装， 8800
T64型设备机柜只配置1个8800 T64机箱发货，满配置总重量约280公斤，与8800
T32型设备满配置重量类似，但8800 T64型设备机柜深度为600mm，与8800 T32 型 设备300mm深的机柜相比，搬运的便利性差一些，搬运困难一些
机柜正面，顶部 有4个指示灯 8800 T64机箱 机柜背面安装B 号8800 T32机箱 机柜背面中间安装C 号6800机箱 机柜背面底部安装D 号6800机箱
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
5 Dot pitch
0.0736(W) X 0.2070(H) mm
6 Active area
176.64(W) X 99.36(H) mm
7 Module siபைடு நூலகம்e
192.8(W) X 116.9(H) X 6.4(D) mm Note 1
8 Surface treatment
Anti-Glare
2010/03/19
David Lee
2010/03/19
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX
InnoLux copyright 2004 All rights reserved, Copying forbidden.
FPC Connector is used for the module electronics interface. The recommended model is FH12A-50S-0.5SH manufactured by Hirose.
Pin No. Symbol I/O
Function
Record of Revision
Version Revise Date Page
Pre-Spec.01 2010/03/10
Initial Release.
Content
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
No.
Item
Specification
Remark
1 LCD size
8.0 inch(Diagonal)
2 Driver element
a-Si TFT active matrix
3 Resolution
800 X 3(RGB) X 480
4 Display mode
Normally White, Transmissive
3.1 Absolute Maximum Rating.............................................................................................. 5 3.1.1 Typical Operation Conditions.................................................................................. 6 3.1.2 Current Consumption ............................................................................................. 7 3.1.3 Backlight Driving Conditions ................................................................................... 7
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX 1 General Specifications
SPEC NO.: A080-64-TT-01 Date: 2010/03/10 Page: 1/20
■Preliminary Specification □Final Specification
For Customer’s Acceptance Approved by
Comment
Approved by
Reviewed by
Prepared by
Joe Lin
Jack Huang
2010/03/22
9 Color arrangement
RGB-stripe
10 Interface
Digital
11 Backlight Power consumption TBD
12 Panel Power consumption
TBD
13 Weight
TBD
Note 1: Refer to Mechanical Drawing.
2.1 TFT LCD Panel Driving Section...................................................................................... 2 3 Operation Specifications ......................................................................................................... 5
3.2 Power Sequence ............................................................................................................ 8 3.3 Timing Characteristics .................................................................................................... 9 4 Optical Specifications............................................................................................................ 12 5 Reliability Test Items ............................................................................................................. 16 6 General Precautions............................................................................................................. 17 6.1 Safety ........................................................................................................................... 17 6.2 Handling ....................................................................................................................... 17 6.3 Static Electricity ............................................................................................................ 17 6.4 Storage ......................................................................................................................... 17 6.5 Cleaning ....................................................................................................................... 17 7 Mechanical Drawing ............................................................................................................. 18 8 Package Drawing ................................................................................................................. 19 8.1 Package Material Table ................................................................................................ 19 8.2 Packaging Quantity ...................................................................................................... 19 8.3 Packaging Drawing....................................................................................................... 20
INNOLUX DISPLAY CORPORATION
LCD MODULE
S P E C I F I C AT I O N
Customer: Model Name: SPEC NO.: Date: Version:
AT 0 8 0 T N 6 4 A0 8 0 - 6 4 - T T- 0 1 2010/03/10 01