JMB350
JMB352U

JMB352UHigh-Speed USB & SATA II Combo to Dual SATA II PortMultiplier(1 to 2) BridgeDescriptionThe JMB352U is a bridge controller, which translates the communication protocol between SATA II 3.0G. This chip integrated 60MIPS 8051, and provide eSATA II 3.0G to dual SATA II 3.0G port multiplier applications in a single chip.In this chip, the SATA controller could be configured as host or device. The 3-port SATA II 3.0G controllers further supports the eSATA to dual SATA communication. Integrated these two technologies, the user could perform JMB352U to the following applications.¾ eSATA to dual SATA bridge port multiplier application¾ One-button system backup application for above applications. (With SATA Vender Software Application)FeaturesQuick ReferenceSignal Bit Rate 3.0 Gbps Power Supply 3.3V and 1.2V GPIO Support UP to 9 ESD Protection 2000 V Package 64-pin LQFP RAID Level Support JBOD, Port MultiplierSATA Port 3 • Compliance with Serial ATA International Organization: Serial ATA Revision 2.6• Compliance with Gen1i, Gen1m, Gen2i and Gen2m of Serial ATA International Organization: Serial ATA Revision 2.6• Support SATA 1.5G/3.0G Speed Negotiation • Support SATA II Asynchronous Signal Recovery (Hot Plug) feature• Support SATA Host/Device controller configuration • Support USB HID Interrupt Transfer• Support ATA/ATAPI PACKET command feature set • Support SATA 30MHz or 40MHz external crystalUSB Port1• Integrated 60MIPS 8051 microprocessor with 64k-byte mask ROM• Support one-button system backup operation • Support one-button disk copy• Support external NVRAM for customer VID/PID, Manufacture and Product String.Applications• Mass storage devices • Optical storage • Storage system • Port MultiplierFunctional Block DiagramMCUUSB Device Controller Hi-Speed USB PHY3-port SATA II Controller3-port SATA II PHYDMA ControllerProgram ROM GPIO I/F Voltage RegulatorGPIOSATA_ASATA_CUSBFig. 1 Functional Block Diagram of JMB352UApplicationsNVRAM KeypadSATA AFig. 2 eSATA to dual SATA port multiplier applicationNVRAM LED KeypadSATAFig. 3 Hi-Speed USB to SATA with 3 LUN bridge applicationSATA DeviceNVRAM LED KeypadSATA BFig. 4 Dual eSATA(Port B & Port C) & Hi-Speed USB to SATA applicationProduct Information Name DescriptionJMB352 Serial ATA Bridge ChipDesign KitContact Information 1 JMB352 Data Sheet Department Email 2 JMB352 Design Guide Sales sales@ 3 Application EVBTech. Support fae@。
PP原料大全(私密级)

5.0 16.0 25.0 2.5 8.5 25.0 50.0 1.2 1.6 1.8 15.0 3.4 4.8 38.0 2.4 4.8 38.0 0.5 0.9 11.0 3.0 7.5 22.5 5.0 12.0 5.0 20.0 20.0 2.9-3.5 10.0 9.5 27.0 27.0 12.0 17.0 12.0 3.5 20.0 1.8 15.0 25.0 18.0 10.0 7.0 4.0 30.0 25.0 11.0 10.0 1.7 0.3 18.0 30.0 10.0 30.0
塑料原料物性总表(积累 PP 单位 PP牌号 5020 3080 1250F 1120 3204 3015 1040 1040F B360F B350F B340F B330F B310F B393G B920G B391G B380G BX3800 BX3900 BX3500 RX3700 BX3920 MT3320 H390F R140H R140M R370Y R520Y R680F R680S R900Y R930Y R140H H920Y H900F H730F H360F H390F K1011 K1023 K1035 K1108 K9017 K9003 K9010 K4008 K4510 K4515 K4535 永嘉化学 永嘉化学 永嘉化学 永嘉化学 永嘉化学 永嘉化学 永嘉化学 永嘉化学 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 SK株式会社 台湾化纤 台湾化纤 台湾化纤 台湾化纤 台湾化纤 台湾化纤 台湾化纤 台湾化纤 台湾化纤 台湾化纤 台湾化纤 厂家 —— 密度 g/cm3 1.10 0.90 0.90 0.90 0.90 0.90 0.90 —— 0.90 —— —— —— —— —— —— —— —— —— —— 0.91 —— —— —— 1.14 —— 0.91 —— —— —— 0.90 0.90 0.91 —— —— —— —— —— —— —— 0.90 0.90 0.90 0.90 0.90 0.90 0.90 0.90 0.90 0.90 0.90 拉伸强度 Mpa 34 20 25 33 35 25 28 34 35 29 28 28 28 28 29 34 29 29 35 32 33 25 29 30 41 25 25 33 28 25 25 30 34 24 38 36 37 38 41 35 35 34 36 21 23 22 30 31 31 31 熔指 断裂伸长率 弯曲模量 g/10min % Mpa 实验数值 厂家数值 实验数值 厂家数值 实验数值 3—5 3.0 8.0 25.0 15.0 24.0 2.0 4.0 3.0 16.0 9.0 7.0 3.5 1.5 60.0 2.5 40.0 25.0 30.0 60.0 10.0 20.0 25.0 8.0 40.0 6.0 6.0 18.0 1.8 23.0 28.0 0.4 4.5 6.0 2.2 0.5 3.5 12.0 40.0 15.0 23.0 38.0 7.5 20.0 2.2 9.0 8.0 10.0 15.0 35.0 3 500 500 500 300 100 450 550 600 500 500 500 500 500 300 300 300 300 <200 —— 300 500 >300 50 500 500 500 500 500 500 500 500 500 500 300 500 500 500 500 200 100 200 200 200 200 200 300 —— 200 200
MSI微星B350M Mortar 用户手册M7A37v1.0_SC

ATX_PWR1
CPU_PWR1
快速入门
IX
开机
1
2
3
4
X
快速入门
目录
安全信息................................................................................................................. 2 规格 ........................................................................................................................ 3 后置 I/O 面板 .......................................................................................................... 7
1
优酷
/v_show/ id_XNDkzODU5MTky.html
2
3
5 4
VI
快速入门
�装显卡
Youtube
http://youtu.be/mG0GZpr9w_A
优酷
/v_show/ id_XNDkyOTc3MzQ4.html
组件概述............................................................................................................... 10
BIOS 设置 ............................................................................................................. 23
JM灌浆套筒参数(北京建茂)

128 0 144 0 160 0 176 0 176 0 200 0 224 0 256 0 306 0
144 0+15
+15
160 0+15
+15 +15 +15 +20 +20 +20
340 0+20
1、 本表为标准套筒的尺寸参数;套筒材料:优质碳素结构钢或合金结构钢,抗拉强度≥600 MPa,屈服强度≥355 MPa,断后伸长率≥16%。 2、 竖向连接异径钢筋的套筒:1)灌浆端连接钢筋直径小时,采用本表中螺纹连接端钢筋的标准套筒,灌浆端连接钢筋的插入深度为该标准套筒规定的深度 L1 值; 2)灌浆端连接钢筋直径大时,采用变径套筒,套筒参数见表 2。
30 30 30 30 30 30 30 30 30 30 30 30 30 30
104 119 134 151 151 166 166 181 181 205 234 266 316 350
96 0+15 112
+15 06.5 M18.7 M18.7 M20.7 M20.7 M22.7 M22.7 M25.7 M28.9 M32.7 M36.5 M40.2
2.0 2.0 2.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.0 3.0 3.0 3.0
75° 60° 60° 60° 60° 60° 60° 60° 60° 60° 60° 60° 60° 60°
19 20 22 25.5 25.5 28 28 30.5 30.5 33 38.5 44 51.5 56
Φ32 Φ34 Φ38 Φ40 Φ45 Φ42 Φ48 Φ45 Φ50 Φ50 Φ56 Φ63 Φ73 Φ80
宏华钻机产品介绍演示教学

• third, the characteristics of the ac motor no spark is more suitable for used on rig;
315mt /700,000lbs ZJ50DBS 1200kW/1600HP
340mt/750,000lbs ZJ70DBS 2000kW/2680HP 450mt/1,000,000lbs
2×1600HP 3×1200kW 3×1600HP 4×1200kW
585mt/1,300,000lbs ZJ90DBS 3200kW/4300HP
井架底座结构 mast and substructure
K形井架、箱叠式底座
K type mast、box-on-box type substructure
绞车 drawworks
• 齿轮驱动的一档单轴绞车。
• 配套一台或多台交流电机,通过齿轮箱驱动滚筒;
• 配套辅助驱动交流电机(选配套),用于自动送钻和应急操作,同时主电
DW Power 600kW/800HP
Mast and Substructure Max. static hook load
170mt/378,000lbs
ZJ40DBS 1000kW/1340HP 225mt /500,000lbs
Pump Power
Power Supply
2×800HP 2×1000kW 2×1000HP 3×1000kW
• first of all, the use of ac variable frequency drive a wide range of speed regulation, large torque output and zero speed and output torque characteristic, suitable for the winch, the mud pump, rotary table, or top drive.
PP牌号的命名

0 【006/镇海石化】【008型/四塑阻燃】【012/镇海石化】【012/宁波甬兴】【045/宁波甬兴】【075/宁波甬兴】1 【1001-PPB-HG/北清联科】【1001-PPG20/北清联科】【1001-PPWG/北清联科】【1001-PPZ6/北清联科】【1001-RGP25/北清联科】【1040/台塑宁波】【1040F/台塑宁波】【1080/台塑宁波】【1100N/阿曼石化】【1100N/沙特APPC】【1101N/沙特APPC】【1102K/沙特APPC】【1120/台塑宁波】【1252F/台塑宁波】【1304E1/埃克森美孚】【1352F/台塑宁波】【1GW20N/苏州宇联】【1GW30N/苏州宇联】【1K22N/苏州宇联】【1K38N/苏州宇联】【1V0N/苏州宇联】2 【2020S/台塑宁波】【2080/宁波法莱新】【2300SC/泰国IRPC】【2302G0/南通开普乐】3 【300/镇海石化】【3015/台湾永嘉】【3040C/台塑宁波】【3080/台湾永嘉】【3204/台湾永嘉】【3204/台塑宁波】【331型/四塑阻燃】【332型/四塑阻燃】4 【4017M/大韩油化】5 【500P/沙特sabic】【5070/台湾永嘉】【5090T/台塑宁波】【570P/沙特sabic】【575P/沙特sabic】6 【6331/马来西亚大藤】【6531/马来西亚大藤】7 【7032E2/埃克森美孚】【7032E3/埃克森美孚】【7033E3/埃克森美孚】A 【A002TM/独山子天利】【A002TM/独山子聚成】【A003J/独山子天利】【A003TM/独山子聚成】【A005GF/独山子天利】【A180TM/独山子天利】【A180TM/独山子聚成】【A200T/独山子天利】【A200TM/独山子聚成】【A200TY/独山子天利】【AF/独山子天利】【AF-PN100/独山子天利】【AF005/独山子天利】【AFT/独山子天利】【AP03B/埃克森美孚】【AP3AW/埃克森美孚】【AP3N/埃克森美孚】【AP7885/埃克森美孚】【AR564/新加坡聚烯烃】【AS164/新加坡聚烯烃】【AU161T/日本住友】【A V161/新加坡聚烯烃】【AW161T/日本住友】【AW564/新加坡聚烯烃】【AY564/新加坡聚烯烃】【AZ564/新加坡聚烯烃】B 【B01-1/镇海石化】【B01-2/镇海石化】【B02/镇海石化】【B330F/韩国SK】【B340F/韩国SK】【B350F/韩国SK】【B360F/韩国SK】【B380G/韩国SK】【B391G/韩国SK】【B393G/韩国SK】【B4808/燕山石化】【B4902/燕山石化】【BH/兰港石化】【BJ300/韩国三星】【BJ500/韩国三星】【BJ550/韩国三星】【BJ600/韩国三星】【BJ730/韩国三星】【BJ750/韩国三星】【BL/兰港石化】【BX3500/韩国SK】【BX3800/韩国SK】【BX3900/韩国SK】【BX3910/韩国SK】C 【C500/兰州石化】【CCA-001/余姚直成】【CFHG-001/余姚直成】【CGFR-30C/余姚直成】【CGFR-35C/余姚直成】【CHG-001/余姚直成】【CHG-002/余姚直成】【CMPP-3/苏州金晨】【CPAS-30C/余姚直成】【CPIB-117/山东道恩】【CSK-PP6/余姚直成】【CST-001/余姚直成】D 【DJ-560SW/韩国湖南】【DJ-570S/韩国湖南】【DY-GK2590S/独山子石化】【DY-W0723F/独山子石化】【DY-W0825RT/独山子石化】【DY-W1825RT/独山子石化】E 【E140/镇海石化】【E140/宁波甬兴】【EP300H/巴塞尔】【EP300R/韩国大林】【EP332C/韩国大林】【EP540P/利安德巴塞尔】【EPC30R/茂名石化】【EPC30R/兰州石化】【EPS30R/独山子石化】【EPS30R/大庆炼化】【EPS30R/茂名石化】【EPS30R/天津联合】F 【F227/日本普瑞曼】【F3-045/镇海石化】【F401/扬子石化】【F401/兰州石化】【F401/盘锦乙烯】【F401/兰港石化】【F5-045/镇海石化】【F501/兰港石化】【F601/兰港石化】【F7-075/镇海石化】【F800E/上海石化】【F9-075/镇海石化】【FB51/韩国三星】【FC9413L/新加坡聚烯烃】【FH51/韩国三星】【FPP-01/山东道恩】【FR-08/余姚中发】【FR-18/余姚中发】【FR-28/余姚中发】【FR-38/余姚中发】【FR-SJ08/余姚盛杰】【FR6010/茂南雄利】【FR7000/茂南雄利】【FRPP/江苏天元】【FRPP-30G/苏州宝丰】【FRPP-30G/苏州虹利】G 【G30H/宁波信高】【GM1600E/上海石化】【GM160E/上海石化】【GPP-20/江苏天元】【GPP-30/江苏天元】【GPP-8-9/镇海石化】【GR-10+/余姚中发】【GR-10H/【GR-30+/余姚中发】【GR-30H/【GR-20H/余姚中发】余姚中发】【GR-20+/余姚中发】余姚中发】【GRPP-130/山东道恩】【GRPP-130N/山东道恩】【GRPP-530H/山东道恩】H 【H030SG/印度信诚】【H110MA/印度信诚】【H1500/韩国现代】【H350FG/印度信诚】【H360F/韩国SK】【H380F/韩国SK】【H430/LG化学】【H4540/韩国现代】【H5200/韩国现代】【H5300/韩国现代】【H550/LG化学】【H710/韩国SK】【H900F/韩国SK】【HFPP-01/山东道恩】【HG01/宁波信高】【HG02/宁波信高】【HGRPP-230/山东道恩】【HI828/韩国三星】【HJ500/韩国三星】【HJ730/韩国三星】【HJ730L/韩国三星】【HM110/巴塞尔】【HP450J/韩国大林】【HP500N/巴塞尔】【HP522J/巴西Quattor】【HP550K/巴西Quattor】【HP602N/韩国大林】【HPP-A/富裕达塑化】【HPP-C/富裕达塑化】【HY301/韩国三星】J 【J-150/韩国湖南】【J-320/韩国湖南】【J-330/韩国湖南】【J-350/韩国湖南】【J-370/韩国湖南】【J106G/日本普瑞曼】【J340/盘锦乙烯】【J340/韩国晓星】【J340/扬子石化】【J440/韩国晓星】【J640/韩国晓星】【J700/兰港石化】【J701/兰港石化】【J703HA/日本普瑞曼】【J740X/韩国晓星】【J742S/韩国晓星】【J800H/兰港石化】【JM-350/韩国湖南】【JM-370K/韩国湖南】K 【K1001/燕山石化】【K1011/台湾化纤】【K4515/台湾化纤】【K4912/燕山石化】【K4912/上海赛科】【K4912/独山子聚成】【K7726/燕山石化】【K7926/上海赛科】【K8003/上海赛科】【K8003/扬子石化】【K8003/台湾化纤】【K8009/台湾化纤】【K8025/台湾化纤】【K8303/燕山石化】【K9015/扬子石化】【K9927/扬子石化】【KY3060/河南开原】M 【M1200HS/上海石化】【M1280HS/上海石化】【M1300R/上海石化】【M1600/韩国现代】【M1600E/上海石化】【M160E/上海石化】【M1685/LG化学】【M180R/上海石化】【M180RI/上海石化】【M250E/上海石化】【M2600R/上海石化】【M350R/上海石化】【M40/南通开普乐】【M500R/上海石化】【M540/LG化学】【M560/LG 化学】【M700R/上海石化】【M800E/上海石化】【M800E/独山子聚成】【M800HS/上海石化】N 【NGPP/余姚双象纳米】【NGPP-H/余姚双象纳米】【NH01/余姚双象纳米】【NH02/余姚双象纳米】【NH03/余姚双象纳米】【NP01/余姚双象纳米】【NP02/余姚双象纳米】【NP04/余姚双象纳米】【NZ01/余姚双象纳米】【NZ03/余姚双象纳米】【NZ04/余姚双象纳米】【NZPP/余姚双象纳米】P 【P100/宁波福天】【P102/宁波福天】【P110/宁波福天】【P110A/宁波福天】【P130/宁波福天】【P203/宁波福天】【P203A/宁波福天】【P204/宁波福天】【P213/宁波福天】【P213A/宁波福天】【P213B/宁波福天】【P260/南京德尔隆】【P301/宁波福天】【P321/宁波福天】【P340/盘锦乙烯】【P402/宁波福天】【P403/宁波福天】【P412/宁波福天】【P413/宁波福天】【P530G/余姚东苑】【P620M/余姚东苑】【P701F/余姚东苑】【P801/余姚东苑】【P812/宁波福天】【P820/宁波福天】【PB 170 A4M/西班牙repsol】【PM970W/日本SunALLomer】【PP-01/富裕达塑化】【PP-01/余姚中发】【PP-02/余姚中发】【PP-02/富裕达塑化】【PP-03/富裕达塑化】【PP-03/余姚中发】【PP-04/富裕达塑化】【PP-04/余姚中发】【PP-05/余姚中发】【PP-06/余姚中发】【PP-07/余姚中发】【PP-08/余姚中发】【PP-09/余姚中发】【PP-10/余姚中发】【PP-101/余姚海港】【PP-201/余姚海港】【PP-6/余姚盛杰】【PP-F01/常州赫利来】【PP-F02/常州赫利来】【PP-F03/常州赫利来】【PP-F04/常州赫利来】【PP-G01/常州赫利来】【PP-G02/常州赫利来】【PP-G03/常州赫利来】【PP-G04/常州赫利来】【PP-G30/余姚海港】【PP-H-010/镇海石化】【PP-HG/余姚海港】【PP-M01/常州赫利来】【PP-M02/常州赫利来】【PP-M03/常州赫利来】【PP-M04/常州赫利来】【PP-T01/常州赫利来】【PP-T02/常州赫利来】【PP-T03/常州赫利来】【PP-T04/常州赫利来】【PP1/上海日之升】【PP10/上海日之升】【PP2/上海日之升】【PP3/上海日之升】【PP4/上海日之升】【PP4/宁波台甬】【PP5/上海日之升】【PP6/上海日之升】【PP6/宁波台甬】【PP7/上海日之升】【PP8/上海日之升】【PP8/宁波台甬】【PP9/上海日之升】【PPFRG0/余姚汇合】【PPFRG10/余姚汇合】【PPFRG15/余姚汇合】【PPH-X-045粒料/镇海石化】【PPH-X-075粒料/镇海石化】【PPH-X-140粒料/镇海石化】【PPH-X-300粒料/镇海石化】【PPH-XD-045/沧州炼化】【PPH-XD-045/石家庄炼化】【PPH-XD-075/沧州炼化】【PPH-XD-075/石家庄炼化】【PPH-XD-140/沧州炼化】R 【R01/宁波信高】【R04/宁波信高】【R140H/韩国SK】【R140M/韩国SK】【R21/宁波信高】【R370Y/韩国SK】【R372Y/韩国SK】【R380Y/韩国SK】【R520F/韩国SK】【R520Y/韩国SK】【R530/韩国晓星】【R680S/韩国SK】【R930Y/韩国SK】【RF03/埃及OPC】【RP344R/韩国大林】【RPP/山东道恩】【RX3700/韩国SK】【RX5200/韩国SK】S 【S1003/上海赛科】【S1004/扬子石化】【S2040/上海赛科】【S700/扬子石化】【S900/兰港石化】【SB9302/大韩油化】【SB9304/大韩油化】【SB9310/大韩油化】【SM240/马来西亚大藤】T 【T-022/吉林石化】【T300/上海石化】【T30S/独山子石化】【T30S/大连石化】【T30S/绍兴三圆】【T30S/海南炼厂】【T30S/大庆炼化】【T30S/延炼石化】【T30S/镇海炼化】【T30S/茂名石化】【T30S/九江石化】【T30S/大庆石化】【T30S/青岛炼化】【T30S/兰州石化】【TF-501/镇海石化】【TM/余姚中发】【TM-20/九江石化】【TM-501/镇海石化】【TY3030FR/宁波台甬】【TY3031FR/宁波台甬】【TY3130GB/宁波台甬】【TY3320C/宁波台甬】【TY3320T/宁波台甬】【TY3330T/宁波台甬】【TY3510/宁波台甬】【TY3530/宁波台甬】【TY3610HG/宁波台甬】V 【V-451/韩国湖南】【V30G/兰州石化】【V30G/海南炼厂】W 【W001/山东道恩】【W02/镇海石化】X 【X03/三菱石化】Y 【Y-120/韩国湖南】【Y-130/韩国湖南】【Y1600/上海石化】【Y2600/上海石化】Z 【Z30S/大连石化】【Z30S/茂名石化】【Z30S/兰州石化】【Z30S/济南石化】【ZF-T20/余姚中发】【ZF-T30/余姚中发】【ZF-T40/余姚中发】【ZF-YM/余姚中发】【ZF-ZR1/余姚中发】【ZRG-30/江苏天元】聚丙烯牌号的命名方法1.国家标准牌号命名法命名方法如下例所示:PPB-MP-300—M:PPB----------特征单元1MP-----------特征单元2300-----------特征单元3M-------------特征单元4其中特征单元1为英文聚丙烯――Polypropylene的缩写PP,所有牌号均一致。
2018 阿特拉斯·科普柯工业动力材料去除工具说明书

工具名称 136备注产品目录使用指南随机附件此指南,为每种工具及其附件(接头、销和防护装置等)提供了详细参数。
操作手册和备用附件清单也包括在内。
可选附件你可在此可找到绝大多数附件的规格参数。
这些规格参数取决于使用工具的具体工位,并且需要单独订阅。
耗气量工具耗气量的单位为升/秒(l/s),与自由空气相关,即:膨胀为大气压力的压缩空气。
除非另有说明,数据为在6.3bar工作压力下的数值,且为最大耗气量。
最大耗气量在工具不配备调速器进行空转(即工具无负荷运转情况)也适用。
配备调速器的工具,在达到最大功率输出时实现最大耗气量。
速度工具速度单位为转数/分(r/min),显示为空转速度,(若无另外规定)即指工具在无负荷和6.3bar工作压力下的运转速度。
最大输出速度为工具无调速器空转速度的50%和配备调速器后空转速度的80%-90%。
订购维修套件在此标题下,列出了针对相关工具进行的最频繁维修工作的维修套件。
振动及噪音排放参照ISO28927的振动值总是作为测定的振动值和偏差给出。
偏差表示测量时的振动范围。
真实工作情况下,使用中工具振动排放范围至少处于同等幅度,通常会非常大。
在众多典型应用操作中使用工具时,大多数情况下,参考ISO28927给出的振动值也可对使用中工具的振动值进行粗略估算。
使用中工具的振动情况会受到非人为可控因素的影响,其中包括维护不当、盗版部件、不平衡的砂轮等。
在测量噪音时,阿特拉斯·科普柯采用了ISO15744标准。
本目录中给出的数值为测得声压等级。
若测得值超出80dB(A),则还会一并提供声功率级。
标准中还描述了如何计算该数值的方法。
不同测试方法和生产过程中数值的偏差为3dB(A)。
使用中工具靠近操作者耳边的噪音值可能与给定值有显著差异,而且在众多应用中,当操作加工声响高于无负载工具噪声时,情况更加突出。
在超出自身控制工作环境下个人风险评估中,因使用公布值,而非实际暴露值所造成的后果,我们阿特拉斯·科普柯公司概不承担责任。
Mettler Toledo 试验用品说明书

M351Glycerin, M = 92.10, z = 1Potassium hydrogen phthalate (KHP)Sodium(meta)periodate (NaIO 4)Potassium iodide, 0.6 mol/LSodium thiosulfate c =01mol/L Sodium hydroxide (NaOH)c(NaOH) = 0.1 mol/LT50, T70 and T90 Excellence Titrators1) Suitability test (Redox):IO 4-+7I -+6H ++H 2O = 4I 2+2OH -+3H 2O 4I 2+8S 2O 32-= 4S 4O 62-+ 8I -, IO 4-: z = 82) Acid base titration:HCOOH + OH -= H2O + HCOO-Titration beakers ME-101974OKI B4250 Printer(parallel cable ME-51 108 780)METTLER TOLEDONeutralization before final disposalApprox. 500 mg Glycerin (anhydrous,> 98%)DM140-SC (Redox titration)DG111-SC (Acid base titration)1.1): 60 g of sodium(meta)periodate are dissolved in a 1 L flask with 12% v/v sulfuric acid. The solution is stored in a brown titration glass bottle.1.2):- 10 mL of sodium periodate solution are pipetted into a 250mL flask and filled up with water.- 500 mg of glycerin are dissolved in 50 mL water and 50 mL of the diluted periodate solution was added. Wait for 30 min.- Blank: 50 mL of the diluted periodate solution was added to 50 mL water. Wait for 30 min.- 20 mL aliquots of both solutions were acidified with 1 mL of 1.0 mol/L HCl. 10 ml 0.6 mol/L KI-solution are added. Deion.water was added to achieve a volume of 50 mL. The released iodine was titrated with 0.1 mol/L sodium thiosulfate.2): 500 mg glycerin are weighed in a titration beaker and 50 mL deion. water were added. For a blank determination 50 mL deionized water were added separately into a titration beaker. The pH was adjusted to 7.8 for both solutions. 50 mL of the sodium periodate solution was pipetted into each beaker and covered wih a watch glass. Both solutions were allowed to stand for 30 min at room temperature. 10 mL of a PEG (polyethyleneglycol)/water mixture (1:1, v:v) were added to both solutions and allowed to stand for 20 min.1): According to USP26 the ratio between the volume of 0.1 mol/L sodium thiosulfate required for the glycerin containing mixture to that for the blank should be between0.750 and 0.765. The obtained ratio was 0.750. This ratio was regarded as a proof that the periodate solution is suitable for the analysis of the glycerin content.2) Acid base titration: The nominal concentration of the glycerin solution was 0.04995 mol/L (0.5061 g in 110 mL). This corresponds to a recovery of 98.90% (see results: mean value of the obtained glycerin concentration). Blank and sample determinations were performed in the same EQP-titration mode and the obtained blank value (mmol) was substracted from the sample value (mmol) in order to account for the acidity in the solvent not corresponding to the released formic acid.3) Oxidation of glycerin with periodate:CH 2OH-CHOH-CH 2OH + 2IO 4-= HCOOH + 2 HCHO + 2 IO 3-+ H 2OOne mole of glycerin corresponds therefore to one mole of formicacid. Formic acid (M = 46.025, z = 1) was titrated with sodium hydroxide.Literature:"USP 26 -Official monographs / Glycerin" p. 867R1=Q-B[Glycerin]; mmol R2=(Q-B[Glycerin])*C/m C=1/z ; mol/LB[Glycerin]: Blank valueThe glycerin content is determined according to USP 26 with acid base titration: Formic acid that is released from glycerin by quantitative reaction with sodium periodate is titrated with sodium hydroxide. Beforehand the suitability of the periodate solution is validated by redox titration using sodium thiosulfate as titrant.Potassium hydrogen phthalate, 80 mg Thomas HitzName: Thomas Hitz, ID Glycerin ContentRx Result Unit Name1/5 -- 27.03.2007 11:30:27R1 =0.98657 mmol ContentR2 =0.04933 mol/L Concentration 2/5 -- 27.03.2007 11:34:16R1 =0.98932 mmol ContentR2 =0.04947 mol/L Concentration 3/5 -- 27.03.2007 11:41:09R1 =0.98976 mmol ContentR2 =0.04949 mol/L Concentration 4/5 -- 27.03.2007 11:47:34R1 =0.98991 mmol ContentR2 =0.04950 mol/L Concentration 5/5 -- 27.03.2007 11:53:14R1 =0.98406 mmol ContentR2 =0.04920 mol/L Concentration StatisticsRx Name n Mean Unit s srel [%]R1 Cont.50.98792 mmol0.00255 0.258R2 Conc.50.04940 mol/L0.00013 0.264。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
JMB350
SATA II Port Multiplier (1 to 2 ports)
Description
The JMB350 is a bridge controller, which translates the communication protocol between SATA II 3.0G. This chip integrated 83MIPS 8051, and provide eSATA II 3.0G to dual SATA II 3.0G port multiplier applications in a single chip.
In this chip, the SATA controller could be configured as host or device. The 3-port SATA II 3.0G controllers further supports the eSATA to dual SATA communication. Integrated these two technologies, the user could perform JMB350 to the following applications.
¾ eSATA to dual SATA bridge port multiplier application
¾ One-button system backup application for above applications. (With SATA Vender Software Application)
Features
Quick Reference
Signal Bit Rate 3.0 Gbps Power Supply 3.3V and 1.2V GPIO Support UP to 9 ESD Protection 2000 V Package 64-pin QFN SATA Port 3 USB Port 1
• Compliance with Serial ATA International Organization: Serial ATA Revision 2.6
• Compliance with Gen1i, Gen1m, Gen2i and Gen2m of Serial ATA International Organization: Serial ATA Revision 2.6
• Support SATA 1.5G/3.0G Speed Negotiation • Support SATA II Asynchronous Signal Recovery (Hot Plug) feature
• Support SATA Host/Device controller configuration
• Support ATA/ATAPI PACKET command feature set
• Support SATA 30MHz external crystal • Integrated 83MIPS 8051 microprocessor with 64k-byte mask ROM • Support 9 GPIO
• 0.13um CMOS technology with QFN 64 package
• Support SATA Port Multiplier function with FIS-based and command-based switching
Applications
• Port Multiplier
• Support STB, DTV , mediaplayer platform to provide additional SATA port
• Mass storage devices • Optical storage • Storage system
Functional Block Diagram
SATA_A
SATA_C
USB
Fig. 1 Functional Block Diagram of JMB352
Applications
SATA Device
SATA Device
NVRAM
LED
Fig. 2 eSATA dual SATA port multiplier application
Product Information Name Description
JMB350 SATA II Port Multiplier (1 to 2 ports)
Design Kit
Contact Information 1 JMB350 Data Sheet Department Email 2 JMB350 Design Guide Sales sales@ 3 Application EVB
Tech. Support fae@。