LQ121S1DG31中文资料

合集下载

基恩士ap-31说明书

基恩士ap-31说明书基恩士AP-31说明书是一本详细介绍基恩士AP-31型号产品的手册。

该产品是一款具有先进功能的电子设备，主要用于办公环境中的文件扫描，实现高效率的数字化处理。

基恩士AP-31说明书中包含了以下内容：1. 产品介绍：说明书首先介绍了基恩士AP-31的外观和主要特点。

该设备采用紧凑型设计，便于放置在办公桌上并占据较小的空间。

同时，它还具有高分辨率扫描功能，能够准确地捕捉和还原文件的细节。

此外，它还具有自动双面扫描和多尺寸文件处理的功能。

2. 产品安装和设置：说明书详细介绍了如何正确安装和设置基恩士AP-31。

用户将会学到如何连接设备到电脑，并安装相应的驱动程序。

此外，说明书还提供了一些常见问题的解决方法，以帮助用户解决可能遇到的安装和设置问题。

3. 扫描功能和设置：该章节详细阐述了基恩士AP-31的各项扫描功能。

用户将学习到如何选择扫描目标类型（如照片、文字文档、名片等），以及如何调整扫描分辨率和颜色设置。

此外，该章节还提供了一些建议和技巧，以帮助用户获得更好的扫描效果。

4. 文件处理和存储：这一部分概述了基恩士AP-31设备的文件处理和存储功能。

用户将会了解到如何选择输出文件格式（如PDF、JPEG等），以及如何设定文件保存路径和命名规则。

同时，说明书还提供了一些文件管理的建议和技巧，以帮助用户更好地组织扫描文件，提高工作效率。

5. 维护和故障排除：这一章节提供了一些维护和故障排除的建议。

用户将会了解到如何正确清洁设备，以保持其良好的工作状态。

此外，说明书还列举了一些常见故障和解决方法，以帮助用户解决可能遇到的问题。

6. 安全注意事项：该部分提供了基恩士AP-31设备的安全使用注意事项。

说明书强调了使用者应该遵守的安全规定，以保证设备的正常运行和用户的人身安全。

这些是基恩士AP-31说明书中包含的一些重要内容。

通过阅读这本说明书，用户可以了解并熟悉该设备的功能和使用方法，以确保能够正确地使用它，并最大程度地发挥其性能。

DL-3120S中文资料

**************************************************************************************************************************************************************OPTOWA Y TECHNOLOGY INC. No .38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303Tel: 886-3-5979798 Fax:886-3-59797371310 nm DFB LASER DIODES DL-3100 SERIESMQW-DFB LASER DIODES**************************************************************************************************************************************************************FEATURES² Uncooled Laser Diode with MQW Structure ² High Reliability, Long Operation Life ² 5 mW CW Operation at 0 ºC ~ +70 ºC² Single Frequency Operation with High SMSR ² Build-in InGaAs Monitor² Flat Window Cap Package (DL-310X) ² Aspherical Lens Cap Package (DL-312X) ² 2 mm Ball Lens Cap Package (DL-314X)APPLICATIONOC-3, OC-12 and Gigabit Ethernet Optical communication systemDESCRIPTIONDL-3100 series are MQW-DFB laser diodes that provide a durable, single frequency oscillation with emission wavelength of 1310 nm. DL-3100 series are hermetically sealed devices with the build-in photodiode for output monitoring.ELECTRICAL AND OPTICAL CHARACTERISTICS (T C =25 °C)Symbol ParameterTest ConditionsMin. Typ. Max. Unit I th Threshold Current CW10 15 mA V OPOperating V oltage CW, I th +20mA 1.2 1.5 V ηSlope Efficiency Part No:DL-310X DL-312X DL-314X CW, I th +20mA0.25 0.20 0.20 0.36 0.32 0.25mW/mAλc Center WavelengthCW, I th +20mA 1290 1310 1330 nm SMSR Side Mode Suppression Ratio CW, I th +20mA 30 35 dB θ‖ Beam Divergence (Parallel)CW, I th +20mA25 deg. θ⊥Beam Divergence (Perpendicular) CW, I th +20mA 35 deg. t r , t f Rise And Fall Times I F =I th , I th +20mA,20~ 80% 0.226 ns I m PD Monitor Current CW, I th +20mA,V RD =1V 100 μA I D PD Dark Current V RD =5V 0.1 μA C t PD Capacitance V RD =5V, f=1MHz 10 15 pF P fFiber Coupled Power Part No:DL-312X DL-314XCW, I th +20mA , SM fiber1.5 0.8mW**************************************************************************************************************************************************************OPTOWA Y TECHNOLOGY INC. No .38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303Tel: 886-3-5979798 Fax:886-3-5979737Part No.: D L − 3 1 □ □ □。

爱普生L3210打印机说明书

No abra las botellas de tinta hasta que esté listo para llenar los tanques de tinta. Las botellas están embaladas herméticamente para etire todo el material de protección del producto.3 P ulse y mantenga presionado el botón de cancelardurante 5 segundos hasta que el indicador deencendido empiece a parpadear y comience la cargade la tinta.Nota: La carga de la tinta tardará aproximadamente 10 minutos.Cuando el indicador de encendido deja de parpadear, la cargade la tinta ha terminado.P recaución: No apague el producto, abra la tapa frontalo cargue papel mientras el producto se esté cargando ogastará tinta.N ota:en comparación con las botellas de tinta subsiguientes. Consulte el Manual del usuario en línea para obtener información sobre la capacidad de carga y los tipos ytamaños de papel disponibles.1 C ompruebe que la carga de la tinta haya terminado.Luego, gire el protector del alimentador hacia adelante, levante el soporte del papel e inclínelo ligeramentehacia atrás.2 D eslice las guías laterales completamente hacialas orillas.3 C oloque papel de tamaño A4 o Carta en el centro delalimentador de papel posterior en posición vertical, con la cara satinada o imprimible hacia arriba.4 D eslice las guía laterales contra el papel, sin apretarlodemasiado, luego gire el protector del alimentadorhacia atrás.5 E xtienda la bandeja de salida, luego levante el parador.Nota: Si está utilizando un Mac o su computadora no tiene un lector de CD/DVD, se requiere una conexión a Internet para obtener el software del producto.1 A segúrese de que el producto NO ESTÉ CONECTADOa la computadora.Windows®: Si aparece la pantalla Nuevo hardware encontrado, haga clic en Cancelar y desconecte el cable USB.。

友达12.1寸液晶屏G121SN01 V4 规格书

工业液晶屏ｗｗｗ．ｈｚｘｕｎｈｏｎｇ．ｃｏｍ
Page
All 6
Old description
Color / Chromaticity Coordinates(Red x y, Green x y, Blue x y): TBD Parameter guideline for LED backlight Dimming Duty cycle Min: TBD LCM Outline Dimension (Rear View) Label and Packaging Connector & Pin Assignment First Edition
New Description
Add Min., Typ., Max.
7. Connector & Pin Assignment ........................................................................ 19 8. Reliability Test Criteria................................................................................... 20 9. Mechanical Characteristics ........................................................................... 21 10. Label and Packaging.................................................................................... 23 11 Safety.............................................................................................................. 24

液晶屏线兼容表

1L 2L1 1L 1L 1大 1L 1大 1L 4S 2L 2S-2S"" 4S
LTM150C151A LTM150C151T LTM150C151L LP121SB有点问题 LP121S2 ITSV50E ITSV50G ITSV50D LTM09C031A LQ12S56 LQ084S1DH01 LT121SS-105
LQ10D131_GZ151D_TD4_VGA_5V_PC_A_5KEY_en
LT121S1_153_5Key_en.bin NL6448AC30_ZAN3T_031107.bin
zan3_T_aa121sb12_SVGA_na_en.bin zan3_LQ11S46_5j_na_d6t_svga_5v.bin LP121S1_PC_5KEY_ZAN3_T.BIN zan3_HLD1104_020330_5J_NA_D6T_SVGA_5V.bin zan3_MEDTCF02QEF_5J_NA_S6T_XGA_5V.bin Zan3_元太V16C6448AC- 6.4寸VGA.bin
2L 2小 4L 4L 2L 2L 4L 2L
60P-LQ150X1DG16转接板
2L 2L 2L 2L 2L 2L 2L 2L 2L 2L
60P-LQ150X1DG16转接板 41P-PD104ST1转接板 3.3 41P-PD104ST1转接板 3.3 41P-PD104ST1转接板 30P-DF14-30P-TTL-SA 3.3V DF19-20P-TMDS 转接板 3.3V 40P扁平 3.3V 41P-PD104ST1转接板 41P-PD104ST1转接板 5V 41P-PD104ST1转接板 3.3 41P-PD104ST1转接板 3.3 41P-PD104ST1转接板 3.3 41P-PD104ST1转接板 3.3V 41P-PD104ST1转接板 5V 41P-TO转接板 5V 41P-TO转接板

理光sp221s说明书

理光sp221s说明书理光SP221S是一款高品质、可靠性强的多功能激光打印机。

本说明书将详细介绍该打印机的主要特点、技术规格、操作方法以及常见故障的解决方法。

一、产品特点1. 高打印分辨率：理光SP 221S采用激光技术，能够实现最高2400×600 dpi的打印分辨率，可以打印出清晰细腻的文字和图像。

2.快速打印速度：该打印机每分钟可打印出22张A4纸，大大提高了工作效率。

3.多功能打印：理光SP221S支持自动双面打印、连续打印、N-Up打印等功能，满足不同打印需求。

4.大容量纸盒：该打印机的纸盒容量可达到250张，可以满足大量打印需求。

5.超长耗材寿命：使用理光SP221S的高容量墨盒，可实现长达2,500页的打印寿命，减少了更换耗材的频率。

二、技术规格1.打印技术：激光打印2. 打印分辨率：最高2400×600 dpi3. 打印速度：22 ppm（每分钟打印张数）4.纸张尺寸：A4、A5、A6、B5、B6等5.支持纸张重量：60-105g/m²6.纸盒容量：最大250张7.接口类型：USB2.08. 操作系统支持：Windows、Mac OS三、操作方法1.打印机安装：将打印机与计算机连接，安装驱动程序后即可正常使用。

2.打印纸张设置：根据打印需求，调整纸张尺寸和纸盒容量。

3.打印质量设置：在打印设置中选择合适的打印分辨率，以获取最佳打印效果。

4.打印文档：在计算机上打开需要打印的文档，选择打印机和打印设置后，点击打印即可开始打印。

四、常见故障及解决方法1.打印机无法正常工作：请检查电源是否接通，数据线是否连接稳定，驱动程序是否正确安装。

2.打印质量差：可能是墨盒耗尽或墨粉不均匀分布所致，可尝试更换墨盒或清洁打印机内部。

3.纸张卡纸：请检查纸张是否放置正确，纸盒是否有纸张堆积，适当调整纸盒纸张张数。

4.打印速度慢：可能是电脑性能问题或数据传输速度较慢，可尝试提升电脑性能或更换高速数据线。

松下1131和1121参数

松下P1131参数规格查看：更多信息或更多图片基本参数打印方式24针撞击串行点阵式打印针数24针打印速度中文：超高速:134字符/秒,高速:90符/秒,中速:45字符/秒分辨率360*360dpi打印宽度连续纸:102至254mm,单页纸:102至297mm 打印方向逻辑搜索双向打印打印针寿命2亿次/针打印性能纸张厚度最厚不超过0.35mm拷贝能力5份(1份原件+4份拷贝)打印语言中文:Epson LQ－300K ASCII:Epson LQ－300打印字体中文:宋体(简体和繁体) 黑体(简体和繁体)英文:3种草稿体7种书信体供纸方式背后推入牵引器输纸(可调节) 顶部单页输纸器接口类型并行接口,RS－232C串行接口打印内存39KB耗材色带性能色带特别耐用:6百万字符打印(KX-P181) 其他特性工作噪音55dB环境标准10℃～35℃;30～80%湿度产品外形434*326*140mm产品重量 5.2Kg其他特点可控制超过10种功能包括：字体原厂设定定位高速输纸切纸预设布置装纸清除缓冲器纸张顶部设定功能续行输纸时间:约65 毫秒(1/6英寸续行走纸)上市日期2002年3月选配自动单页输纸器(KX-PT12)数据来源：中关村在线报价中心 ()松下P1121参数规格查看：更多信息或更多图片基本参数打印方式撞击串行点阵式打印针数24针打印速度Micron 草稿体:240字符/秒,书信体80字符/秒分辨率360*360dpi打印宽度连续纸:4.0 至 10.0 英吋,连续纸:4.0 至 11.7英吋打印方向双向打印(用户可选择单向打印)打印针寿命2亿次/针打印性能纸张厚度最厚不超过 0.013 英吋拷贝能力4份(1份原件+3份拷贝)打印语言Epson LQ－850,IBM Proprinter X24E打印字体Courier,Prestige,Bold PS供纸方式背后推入牵引器输纸（可调校）顶部单页输纸器接口类型并行接口打印内存14K(标准),32K(配件)平均无故障时间4000小时其他特性工作噪音52dB环境标准50～95 ℉ 温度30～80%湿度产品外形434*314*134.5mm产品重量 4.8Kg随机附件配件自动单页输纸器（KX-PT12）3.2 k 扩充缓冲器芯片（KX-P44）其他特点可控制超过10种功能包括：字体原厂设定表格长度清除缓冲器输纸切纸预设布置装纸续行输纸时间:约 100 毫秒(1/6 吋续行走纸)上市日期2006年10月数据来源：中关村在线报价中心 ()。

DS26LV31QML中文资料

DS26LV31QML3V Enhanced CMOS Quad Differential Line DriverGeneral DescriptionThe DS26lV31is a high-speed quad differential CMOS driver that is comparable to the TIA/EIA-422-B and ITU-T V.11standards.The CMOS DS26LV31features low static I CC of 125µA Max which makes it ideal for battery powered and power conscious applications.Differential outputs have the same V OD guarantee (≥2V)as the 5V version.The EN and EN inputs allow active Low or active High control of the TRI-STATE outputs.The enables are common to all four drivers.Protection diodes protect all the driver inputs against electrostatic discharge.The driver and enable inputs (DI,EN,EN)are compatible with low voltage LVTTL and LVC-MOS devices.Featuresn Comparable to both TIA/EIA-422and ITU-T V.11standards.n Interoperable with existing 5V RS-422networks n Low quiescent currentn Pin compatiable with DS26C31Ordering InformationNS Part Number SMD Part Number NS Package NumberPackage Description DS26LV31W-QML5962–9858401QFAW16A16Lead Ceramic FlatpackConnection DiagramCeramic Flatpack20163401Top ViewSee NS Package Number W16AMarch 2006DS26LV31QML 3V Enhanced CMOS Quad Differential Line Driver©2006National Semiconductor Corporation Absolute Maximum Ratings (Notes 1,2)Supply Voltage (V CC )-0.5V to 7.0V DC Input Voltage (V I )-0.5V to V CC +0.5VDC Output Voltage (V O )Power off -0.5V to 7VClamp Diode Current (I IK ,I OK )±20mA DC Output Current,per Pin (I O )±150mAStorage Temperature Range (T Stg )-65˚C ≤T A ≤+150˚CLead Temperature (T L )Soldering,4seconds 260˚C Maximum Power Dissipation +25˚C (Note 3)1119mWThermal Resistance θJA 134˚C/W θJC12.5˚C/W Recommended Operating ConditionsSupply Voltage (v CC )3.0V to 3.6V DC input or Output Voltage (V I ,V O )0V to V CCOperating Temperature Range (T A )−55˚C ≤T A ≤+125˚CQuality Conformance InspectionMil-Std-883,Method 5005-Group ASubgroupDescription Temp ˚C 1Static tests at 252Static tests at 1253Static tests at -554Dynamic tests at 255Dynamic tests at 1256Dynamic tests at -557Functional tests at 258A Functional tests at 1258B Functional tests at -559Switching tests at 2510Switching tests at 12511Switching tests at -5512Settling time at 2513Settling time at 12514Settling time at-55D S 26L V 31Q M L 2DS26LV31M Electrical Characteristics DC ParametersSymbol Parameter Conditions Notes Min Max UnitsSub-groupsV IH Logical"1"Input Voltage(Note6) 2.0V1,2,3 V IL Logical"0"Input Voltage(Note6)0.8V1,2,3 V OD1Differential Output Voltage R L=No Load,V CC=3.0/3.6V(Note4) 4.0V1,2,3 V OD2Differential Output Voltage R L=100Ω,V CC=3.0/3.6V(Note4) 2.0V1,2,3 V OD2-V OD2Difference in Differential Output R L=100Ω,V CC=3.0/3.6V(Note4)-0.40.4V1,2,3 V OD3Differential Output Voltage R L=3900Ω,V CC=3.0/3.6V(Note4) 3.6V1,2,3 V OC Common Mode Output Voltage R L=100Ω,V CC=3.0/3.6V(Note4) 2.0V1,2,3V OC-V OC Difference in Common ModeOutput R L=100Ω,V CC=3.0/3.6V(Note4)-0.40.4V1,2,3I IL Low Level Input Current V I=Gnd,V CC=3.6V-10µA1,2,3 I IH High Level Input Current V I=V CC,V CC=3.6V10µA1,2,3 V CL Input Clamp Voltage I I=-18mA,V CC=3.0V-1.5V1,2,3I CC Quiescent Power SupplyCurrent I O=0uA,V I=V CC or Gnd,V CC=3.6V125µA1,2,3I OZ TRI-STATE Output LeakageCurrent V O=V CC or Gnd,Enable=Vil,V CC=3.6V,Enable=V IH±20µA1,2,3I SC Output Short Circuit Current V I=V CC or Gnd,V CC=3.0/3.6V,V O=0.0V (Note4),(Note5)-30-160mA1,2,3I Off Output Leakage Current"Power Off"V CC=0V,V O=6.0V or3.0V100µA1,2,3 V CC=0V,V O=-0.25V-200µA1,2,3AC Parameters-Propagation Delay TimeThe following conditions apply to all the following parameters,unless otherwise specified.AC:V CC=3.0/3.6VSymbol Parameter Conditions Notes Min Max UnitsSub-groupst PLHD Differential Propagation Delay(Low to High)R L=100Ω,C L=50pF(Note7)5.025nS9,10,11t PHLD Differential Propagation Delay(High to Low)R L=100Ω,C L=50pF(Note7)5.025nS9,10,11t SKD Differential Skew t PHLD-t PLHD(same channel)R L=100Ω,C L=50pF(Note7)5.0nS9,10,11t SK1Pin to Pin Skew(same device)R L=100Ω,C L=50pF(Note7) 5.0nS9,10,11t PZH Output Enable Time R L=110Ωto Gnd,C L=50pF(Note8)40nS9,10,11t PZL Output Enable Time R L=110Ωto V CC,C L=50pF(Note8)40nS9,10,11t PHZ Output Disable Time R L=110Ωto Gnd,C L=50pF(Note8)35nS9,10,11t PLZ Output Disable Time R L=110Ωto V CC,C L=50pF(Note8)35nS9,10,11 Note1:Absolute Maximum Ratings indicate limits beyond which damage to the device may occur.Operating Ratings indicate conditions for which the device is functional,but do not guarantee specific performance limits.For guaranteed specifications and test conditions,see the Electrical Characteristics.The guaranteed specifications apply only for the test conditions listed.Some performance characteristics may degrade when the device is not operated under the listed test conditions.Note2:Unless otherwise specified,all voltages are referenced to ground.All currents into device pins are positive,all currents out of device pins are negative.Note3:Derate W package7.5mW/˚C above+25˚C.Note4:See EIA specification RS-422for exact test condition.Note5:This is a current sourced when a high output is shorted to Gnd.Only one output at a time should be shorted.Note6:Parameter tested Go-No-Go only.Note7:Generator waveform is specified as follows:ƒ=1MHz,Duty Cycle=50%,Z O=50Ω,t R=t F≤6nS.Driver input=0V to3V with measure points equal to1.5V.Differential output V Diff=D O-D O with measure point equal to0V.Note8:Generator waveform is specified as follows:ƒ=1MHz,Duty Cycle=50%,Z O=50Ω,t R=t F≤6nS.En/En inputs=0V to3V with measure points equal to1.5V on the inputs,to1.3V on the outputs for Z L and Z H,and(V OL+0.3V)for L Z,and(V OH.-0.3V)for H Z.DS26LV31QML3Revision HistoryReleased RevisionSectionOriginator Changes03/01/06ANew Release,Corporate formatL.Lytle1MDS data sheets converted into one Corp.data sheet format.MNDS26LV31-X Rev 1A0will be archived.D S 26L V 31Q M L 4Physical Dimensionsinches (millimeters)unless otherwise notedCerpack Package (W)NS Package Number W16ANational does not assume any responsibility for use of any circuitry described,no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.For the most current product information visit us at .LIFE SUPPORT POLICYNATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION.As used herein:1.Life support devices or systems are devices or systems which,(a)are intended for surgical implant into the body,or (b)support or sustain life,and whose failure to perform when properly used in accordance with instructions for use provided in the labeling,can be reasonably expected to result in a significant injury to the user.2.A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system,or to affect its safety or effectiveness.BANNED SUBSTANCE COMPLIANCENational Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products Stewardship Specification (CSP-9-111C2)and the Banned Substances and Materials of Interest Specification (CSP-9-111S2)and contain no ‘‘Banned Substances’’as defined in CSP-9-111S2.Leadfree products are RoHS compliant.National Semiconductor Americas Customer Support CenterEmail:new.feedback@ Tel:1-800-272-9959National SemiconductorEurope Customer Support CenterFax:+49(0)180-5308586Email:europe.support@Deutsch Tel:+49(0)6995086208English Tel:+44(0)8702402171Français Tel:+33(0)141918790National Semiconductor Asia Pacific Customer Support CenterEmail:ap.support@National SemiconductorJapan Customer Support Center Fax:81-3-5639-7507Email:jpn.feedback@ Tel:81-3-5639-7560DS26LV31QML 3V Enhanced CMOS Quad Differential Line Driver。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

In the absence of confirmation by device specification sheets, SHARP takes no responsibility
for any defects that may occur in using any SHARP devices shown in catalogs, data books, etc.
Contact SHARP in order to obtain the latest device specification sheets before using any
SHARP device. Specifications are subject to change without notice for improvement.

Outline Dimensions
unit : mm

New Product
Color TFT-LCD Module
LQ121S1DG31
(FA/POS/Measuring instruments)
Features
s31 cm [12.1"] SVGA formatsHigh brightness (300 cd/m
2
)
sBuilt-in long life CCFT backlight (50 000 h, easily replaceable)sWide viewing angle
sConnector is attached from the back of the module(Horizontal: 140° Vertical: 110°)

Specifications
ParameterUnitParameterUnit
Display size31 [12.1]cm [ "]Brightness300cd/m
2

Dot format (H x V)800 x RGB x 600dotContrast ratio300 : 1-
Dot pitch (H x V)0.1025 x 0.3075mmPower consumption7.2W
Active area (H x V)246.0 x 184.5mmOutline dimensions (W x H x D)276.0 x 209.0 x 14.0mm
Color262 144-Weight775g
Input signal6-bit CMOS-Operating temperature0 to +50°C
Viewing direction6:00-Storage temperature-25 to +60°C
Backlight type2CCFT(E)-

2
3
2.55.514MAXCN3CN25.52.5319.24209185.8975.52.514MAX14MAX(161)1383.42.7270.33.47.54.52136.527690Active AreaBezel OpeningActive Center246 x 184.5249 x 187.53131Mounting Hole14MAX14 MAX5.52.5

14MAX
M
o
u
n
t
i
n
g
H
o
l

元器件交易网www.cecb2b.com