M3 宣传页-all(更新)
纵维立方m3 参数
纵维立方m3 参数一、概述纵维立方m3纵维立方m3是一款备受关注的电子产品，它以出色的性能和实用的功能赢得了大量用户的喜爱。
本文将详细介绍纵维立方m3的主要参数，分析其优缺点，并为大家提供购买建议。
二、纵维立方m3的主要参数1.尺寸和重量纵维立方m3的尺寸和重量适中，便于携带和存放。
其紧凑的设计让它在办公和家庭环境中都能占据最小的空间。
2.材质和颜色纵维立方m3采用高品质材质制成，具有良好的耐磨性和抗压性。
颜色方面，纵维立方m3提供了多种选择，以满足不同用户的审美需求。
3.容量和续航纵维立方m3具备大容量存储空间，可满足用户长时间使用的需求。
在正常使用情况下，其续航表现优秀，无需频繁充电。
4.性能和速度纵维立方m3搭载了高性能处理器，运行速度快，能迅速响应用户操作。
在处理多任务和大型应用时，表现稳定。
5.接口和扩展性纵维立方m3配备了丰富的接口，方便用户连接各种设备。
此外，它还具备良好的扩展性，便于用户在未来添加更多功能。
6.操作便捷性纵维立方m3的操作界面简洁直观，用户可以轻松上手。
无论是新手还是资深用户，都能快速掌握其操作方法。
三、纵维立方m3的优缺点分析1.优点（1）性能出色，运行速度快；（2）续航表现良好，减少充电次数；（3）操作便捷，易于上手；（4）接口丰富，扩展性强。
2.缺点（1）价格相对较高；（2）部分用户可能会觉得重量稍重。
四、购买建议和适用人群纵维立方m3是一款具备高性能、长续航和便捷操作的电子产品，适合对性能有较高要求、经常外出办公和追求操作便捷性的用户。
Magico M3用户手册说明书
MAGICO M3 USER’S GUIDEA MESSAGE FROM ALON WOLF:THANK YOU FOR PURCHASING THE MAGICO M3 LOUDSPEAKERS.THE M3 INCORPORATES ALL WE HAVE LEARNED IN THE PAST 23 YEARS ABOUT LOUDSPEAKER DESIGN AND MANUFACTURING. LIKE ALL MAGICO LOUDSPEAKERS, THE M3 IS A PRECISION INSTRUMENT FOR MUSIC REPRODUCTION. PROPERLY SET UP AND MAINTAINED, IT WILL PROVIDE YOU WITH A GREAT MUSICAL EXPERIENCE FOR MANY YEARS.BEFORE UNPACKING AND PLAYING YOUR SPEAKERS, PLEASE READ THE FOLLOWING MANUAL FULLY. IT WILL PROVIDE YOU WITH DIRECTIONS FOR PROPERLY SETTING UP, POSITIONING, CONNECTING, AND CARING FOR YOUR SPEAKERS. FOLLOWING THESE INSTRUCTIONS WILL ENSURE A SMOOTH INSTALLATION AND OPTIMUM SPEAKER PERFORMANCE.IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT YOUR AUTHORIZED MAGICO DEALER. MAGICO MAINTAINS A NETWORK OF DEDICATED DISTRIBUTORS WHO WILL BE ABLE TO HELP YOU, SHOULD YOU HAVE ANY PROBLEMS YOUR DEALER CANNOT RESOLVE. FOR THE LATEST INFORMATION ON ALL MAGICO PRODUCTS, PLEASE VISIT OUR WEBSITE, .I WISH YOU MANY HOURS OF LISTENING PLEASURE.KINDEST REGARDS,ALON WOLF, CEOMAGICO, LLCWARNINGTHE M3 USES A TWEETER EQUIPPED WITH A DIAMOND COATED BERYLLIUM DOME, ALLOWING A FREQUENCY RANGE EXTENDING BEYOND 40kHz. IN ITS SOLID FORM, BERYLLIUM IS HARMLESS. HOWEVER, DUE TO ITS NATURE, CERTAIN SPECIAL PRECAUTIONS SHOULD BE OBSERVED TO AVOID EXPOSURE TO UNNECESSARY RISK, SUCH AS:• UNDER NO CIRCUMSTANCES SHOULD THE BERYLLIUM DOME BE SUBJECTED TO ANY FORM OF ABRASIVE ACTION.• IN THE UNLIKELY CASE OF DAMAGE TO THE DOME, OF ANY FORM, A WIDE PIECE OF ADHESIVE TAPE SHOULD BE IMMEDIATELY USED TO SEAL THE WHOLE FRONT SURFACE OF THE TWEETER. YOU SHOULD THEN INFORM THE DEALER WHO YOU PURCHASED THE PRODUCT FROM, SO THAT THE TWEETER CAN BE REMOVED AND REPLACED BY A PROFESSIONAL.• IF THE DOME IS DAMAGED IN ANY WAY, CAUSING LOOSE PARTICLES OF BERYLLIUM, THESE SHOULD BE CAREFULLY COLLECTED WITH THE USE OF ADHESIVE TAPE, PLACED IN A SEALABLE BAG, AND RETURNED ALONG WITH THE TWEETER.MAGICO M3 USER’S GUIDEUNPACKING INSTRUCTIONS1.THE FOLLOWING TOOLS ARE REQUIRED: A PRY BAR, 3/8” DRIVE RATC HET ORDRIVE ADAPTER AND CO RDLESS DRILL, 9/16” OR 14MM SOCKET, 3/4” OR 19MM SOCKET, ¼” HEX WRENCH, 3/8” HEX WRENCH, 5/16” HEX WRENCH, AND 3PEOPLE.ING A FLAT HEAD SCREWDRIVER OR PRY BAR, REMOVE THE 6 CLAMPS FROMTHE FRONT OF THE CRATE AND REMOVE THE CRATE DOOR.3.REMOVE THE DOOR. THEINSIDE OF THE DOOR HAS ATAB, PLACE THIS TAB DOWNAND INSIDE THE KEYWAY SLOTTHAT IS IN THE CRATE BASE.4.THE DOOR NOW BECOMES ARAMP THAT IS LOCKED INPLACE WITH THE CRATE BASE.ING A 3/8” DRIVE RATCHETOR CORDLESS DRILL WITH A9/16” SOCKET BIT REMOVE THE6 BOLTS FROM AROUND THEBOTTOM OF THE CRATE.6.WITH TWO PEOPLE, LIFT ANDREMOVE THE CRATE BOX TOPAND REMOVE FOAM FROM DOOR RAMP.7.YOU WILL NOTICE THATCASTER WHEELS ARESECURED TO THE CRATEBASE WITH A “U-BRACK ET”OR STRAP CLAMP, AFASTENER, A CHOCK BLOCKAND A ZIP TIE.8.REMOVE THE ZIP TIESSECURING THE CHOCK BLOCKSTO THE CASTER WHEELS. USEWIRE CUTTERS, SCISSORS, OR ABLADE TO CAREFULLY REMOVETHESE TIES.9.REMOVE THE FASTENERS THATARE SECURING THE CASTEROUTRIGGERS TO THE CRATEBASE USING A 9/16” SOCKETAND RATCHET.10. REMOVE CHOCK BLOCKS FROMUNDERNEATH CASTERS.11. REMOVE THE BOLTSFASTENING THE STRAP CLAMPSOR “U-BRACKETS” ON A LL FOUR CASTER WHEELS USING A 9/16”SOCKET AND RATCHET.12.UNLOCK THE CASTER WHEEL BRAKES, PUSH THE SPEAKER 3 INCHES TOWARDSTHE RAMP, SET BRAKES TO “ON” P OSITION, NOW SLIGHTLY TILT THE SPEAKERS TOWARDS THE REAR SO THAT THE WEIGHT ON THE FRONT WHEELS ISALEVIATED, UNLOCK BRAKES AND PIVOT THE FRONT CASTER WHEELS TO FACE THE BACKSIDE/REAR OF THE SPEAKER AND LOCK THE CASTER WHEEL BRAKES.13.WITH TWO PEOPLE, ONE PERSON ON EITHER SIDE OF THE M3, TRANSPORTSPEAKER DOWN THE RAMP AND OFF OF THE BASE.14.POSITION SPEAKERS IN DESIRED LOCATION.15.SET ALL BRAKES TO “ON” POSITION AND REMOV E THE VELVET BAG.MPOD OWNERSING THE HELP OF 2 OR MOREPEOPLE, TILT SPEAKER BACKWARD, UNINSTALL FRONT CASTERWHEELS AND INSTALL M-PODS BYCAREFULLY THREADING THEMINTO POSITION. ALTERNATIVELY,IF YOU DO NOT HAVE THE M-PODPACKAGE GO TO STEP 22.17. TILT SPEAKER FORWARD, UNTHREAD ANDREMOVE THE SHIPPING BARS FROM THE BOTTOM OF THE M3. YOU WILL NEED A 3/8” HEX BIT TOREMOVE THE LARGE FASTENER ON THE SHIPPING BAR. YOU WILL NEED TO USE A 5/16” HEX B IT TO REMOVE THE SMALLER SHIPPING BAR FASTENER.INSTALL THE M-POD BY CAREFULLY THREADING IT IN TO POSITION. M-PODS WITH A SHORT STUDMUST ONLY BE INSTALLED IN THE REAR SECTION OF THE STAND. M-PODS WITH LONGER STUDSARE TO BE INSTALLED IN THE FRONT TWO STAND OUTRIGGERS.ING A ¼” HEX WRENCH, ADJUST ANDLEVEL THE M-POD BY TURNING THEEXPOSED STUD.19.WHEN THE IDEAL POSITION HAS BEEN ACQUIRED, CAREFULLY THREAD ONTHE M-POD TOP.20.REMOVE THE ANCHOR PIN FROM THE M-PODS. THIS PIN MUST BE REPLACEDBEFORE ANY ATTEMPTS TO ADJUST POSITIONING OF THE SPEAKER.21.REMOVE THE TWEETER PROTECTOR ANDSECURITY TAPE AND PROCEED TO STEP35.M3 SPIKE OWNERS22. SPIKE OWNERS HAVE A CHOICE OFCHOOSING WHICH TYPE OF FOOT TOUSE. THE BALL END FOOT IS FOR USE ON HARD FLOORS WHILE THE SPIKE IS FORUSE ON A CARPETED SURFACE.23.TO ASSEMBLE THE M3 SPIKE, CHOOSETHE FOOT THAT WILL WORK BEST WITHTHE TYPE OF FLOORING YOU HAVE.THREAD THE HEX JAM NUT ON TO THEFOOT OF YOUR CHOICE AND THREAD ITALL THE WAY TO THE LAST THREAD(WHERE THE TAPER BEGINS).24.THREAD THE FOOT AND JAM NUTASSEMBLYE IN TO THE M3 SPIKE BODY(BLACK AND COPPER UNIT). YOU NOWHAVE A FINISHED M3 SPIKE READY FORINSTALL.ING THE HELP OF 3 OR MOREPEOPLE, POSITION ALL FOURCASTER WHEELS SO THAT THEYARE FACING INWARD. THIS WILLALLOW FOR THE SPEAKER TO TILTWITH EASE.26. TILT SPEAKER BACKWARD,UNINSTALL FRONT SHIPPING BARSBY REMOVING THE (2) LARGE AND(2) MEDIUM SIZE FASTENERSFROM THE SHIPPING BARS. USE A3/8” HE X BIT TO REMOVE THELARGE FASTENERS, USE A 5/16” BIT TO REMOVE THE MEDIUMFASTENERS. HOLD THE CASTERWHEEL WHEN REMOVING THESHIPPING BAR, THIS WILLALLEVIATE ANY PRESSURE ON THEFASTENER AND WILL MAKE THEREMOVAL OF THE FASTENERMUCH EASIER.27.WITH THE M3 STILL BEING TIPPED BACK ANDTHE SHIPPING BARS REMOVED, CAREFULLYTHREAD IN THE M3 SPIKE ASSEMBLY IN TOBOTH LOCATIONS ON THE BASEPLATE.28. GENTLY LOWER THE CABINET DOWN ON TOITS SPIKES, HAVE 2 PEOPLE HOLD THESPEAKER FOR STABILITY.29.HAVE TWO PEOPLE TIP THE M3 FORWARDSON TO THE SPIKES, HAVE BOTH PEOPLEHOLDING AND STABILIZING THE M3.30.REMOVE THE REAR SHIPPING BARS.UNFASTEN (2) LARGE AND (2) MEDIUMFASTENERS THAT ARE SECURING THESHIPPING BARS WITH A 3/8” HEX BIT (FORTHE LARGE FASTENER) AND A 5/16” HEXBIT (FOR THE MEDIUM SIZE FASTENER).HOLD THE CASTER WHEELS WHENREMOVING THE SHIPPING BAR TOALEVIATE PRESSURE ON THE FASTENERS.31.CAREFULLY THREAD IN THE M3 FOOTASSEMBLY.32.SLOWLY LOWER THE CABINET ON TO ALLFOUR SPIKES. ADJUST THE HEIGHT OFEACH SPIKE TO LEVEL THE M3. THREADTHE SPIKE IN TO LOWER HEIGHT ANDTHREAD SPIKES OUT TO RAISE HEIGHT.WHEN THE SPEAKER IS LEVEL, LOCK THESPIKE IN PLACE BY FASTENING THE LOCKNUT AGAINST THE FOOT ASSEMBLY WITH A 19MM OR ¾” WRENCH.33.CAREFULLY LOWER THE M3 DOWN ON ALLFOUR SPIKES.34.REMOVE THE TWEETER SECURITY TAPE.35. A TORQUE WRENCH IS INCLUDED IN EACHACCESSORY KIT TO CHECK TORQUE ONEACH OF THE 8 FLAT FASTENERS ON THEBACK OF THE M3.36. SET THE TORQUE WRENCH FOR 115 INCHPOUNDS.•LOOSEN THE LOCK AT THEBOTTOM OF THE TORQUEWRENCH.•TURN THE HANDLE SO T HE “5”LINES UP WITH THE “110” ON THEINCH-POUND SCALE.•TIGHTEN THE LOCK AT THEBOTTOM OF THE TORQUEWRENCH.37. ATTACH THE BIT AND DRIVE TO THETORQUE WRENCH DRIVE SHAFT.38. CHECK THE TORQUE OF EACH OF THE 8FLAT FASTENERS ON THE BACK OF THE M3.THE WRENCH WILL CLICK TO LET THE USER KNOW THAT THE TORQUE SETTING OF THE FASTENERS IS UP TO DATE. NOW SET THEWRENCH TO ITS LOWEST SETTING TOPRESERVE ITS ACCURACY DURINGSTORAGE.•LOOSEN THE LOCK AT THEBOTTOM OF THE TORQUEWRENCH.•TURN THE HANDLE SO T HE “0”LINES UP WITH THE “20” MARKON THE INCH-POUND SCALE.•TIGHTEN THE LOCK AT THEBOTTOM OF THE TORQUEWRENCH.SPEAKER PLACEMENT AND POSITIONINGTHE MAGICO M3 LOUDSPEAKERS ARE PRECISION INSTRUMENTS FOR MUSIC REPRODUCTION. AS SUCH, PROPER CARE AND ATTENTION TO DETAIL WHEN SETTING UP THESE SPEAKERS WILL YIELD THE MAXIMUM PERFORMANCE, REGARDLESS OF THE PARTICULAR ROOM. FOLLOWING THESE SET-UP GUIDELINES WILL ENSURE THE SPEAKERS ARE PROPERLY POSITIONED TO DELIVER THE OPTIMUM LISTENING EXPERIENCE. ALL THAT IS REQUIRED IS A TAPE MEASURE, A PEN, A CALCULATOR, A BALL OF STRING, A COUPLE OF DEMO CDS, AND SOME PATIENCE.PLACEMENT—M3s IN RELATION TO BACK AND SIDE WALLSBEFORE YOU BEGIN: LOOK FOR OBVIOUS IMPEDIMENTS INCLUDING ANYTHING THAT COULD IMPEDE OR DIMINISH THE SOUND—E.G., OTHER SPEAKERS, AMPLIFIERS, EQUIPMENT RACKS, ANYTHING ON THE WALL THAT COULD CAUSE A REFLECTION, A SEVERE MISMATCH IN QUALITY AMONG INDIVIDUAL COMPONENTS, AND UNNECESSARY OR POORLY RUN SPEAKER/INTERCONNECT CABLES.BASS—DISTANCE FROM REAR WALLTHE INITIAL PLACEMENT SHOULD BE APPROXIMATELY 20 INCHES (1/2 M) FROM THE BACK OF THE LOUDSPEAKER TO THE BACK WALL. SINCE WE HAVE SHORT AUDITORY MEMORY, THE SELECTED DEMO MUSIC CUT SHOULD BE BRIEF—30 SECONDS – 1 MINUTE MAX. IT SHOULD BE A WELL RECORDED JAZZ CUT WITH GOOD BASS GUITAR OR PERCUSSION. WHAT WE ARE LISTENING FOR AT THIS TIME IS THE DEFINITION OF THE BASS AND THE RIGHT SENSE OF PROPORTION.NEXT, MOVE THE SPEAKER 6 – 8 INCHES (15 – 20 CM) FORWARD AND REPEAT THE LISTENING PROCESS. REPEAT THIS PROCESS, MOVING THE LOUDSPEAKER FORWARD IN 6 – 8 INCH (15-20 CM) INCREMENTS. WHEN YOU REACH THE POINT FROM WHICH MOVING THE SPEAKER FORWARD SOUNDS WORSE THAN THE PREVIOUS LISTENING POINT, MOVE THE LOUDSPEAKER BACK TO THIS POSITION AND MARK THIS DISTANCE FROM THE REAR WALL.MIDRANGE—PLACEMENT IN RELATION TO SIDE WALLS FOR LATERAL PLACEMENT BEGIN BY DIVIDING THE ROOM WIDTH BY 14. INITIAL PLACEMENT OF THE LOUDSPEAKERS WILL BE AT 3 AND 11. THE DISTANCE FROM THE LOUDSPEAKER TO THE EARS HAS TO BE PRECISELY EQUAL. THIS MEASUREMENT IS CRITICAL. THE MUSIC FOR THIS PROCESS SHOULD BE A FEMALE VOICE AND PIANO. WE ARE LISTENING FOR THE IMAGE OF HER VOICE TO BE FOCUSED. THE RULE FOR THE TOE-IN IS TO PICK A POINT APPROXIMATELY 1 –2 FEET (. M) BEHIND THE LISTENER’S HEAD. TOE THELOUDSPEAKERS IN TO INTERSECT AT THAT POINT. IF THE SOUND IS TOO BRIGHT, TOE THE SPEAKERS OUT A LITTLE MORE. IF THE SOUND IS TOO DULL, TOE THE SPEAKERS IN A LITTLE MORE. REPEAT THE ABOVE PROCESS WITH THE LOUDSPEAKERS AT THE 4 AND 10 POSITION. THEN REPEAT, ONCE AGAIN WITH THE SPEAKERS AT THE 5 AND 9 POSITION. SUMMARYONCE THE INITIAL PROCESS HAS BEEN COMPLETED, RETURN TO THE BASS SET-UP TO ENSURE THAT THE LOUDSPEAKERS ARE THE PROPER DISTANCE FROM THE BACK WALL. WHEN THE PROCESS HAS BEEN COMPLETED, MARK THE SPEAKER LOCATION WITH TAPE SO THAT THE SPEAKERS CAN BE RETURNED THERE FOR FURTHER LISTENING. POSITIONING—M3s IN RELATION TO THE LISTENER• THE SPEAKERS AND THE LISTENER SHOULD FORM AN ISOSCELES TRIANGLE.• THE LISTENER SHOULD BE EXACTLY EQUIDISTANT BETWEEN THE TWO LOUDSPEAKERS. THE BEST WAY TO DETERMINE THIS IS WITH A PIECE OF STRING. PICK A FIXED SPOT AT THE LISTENING POSITION. RUN THE STRING FROM THIS SPOT TO THE FRONT OF THE TWEETER OF THE LEFT SPEAKER. REPEAT THE PROCESS FOR THE RIGHT SPEAKER. IT IS CRITICALLY IMPORTANT TO KEEP THIS DISTANCE PRECISELY THE SAME. CONNECTIONSCONNECTIONS SHOULD BE MADE WITH ALL ELECTRONIC EQUIPMENT (AMPLIFIERS, PREAMPLIFIERS) TURNED OFF. THERE ARE TWO TERMINALS AT THE BACK OF THE SPEAKER. THE TERMINALS ARE INSULATED TO ACCEPT A VARIETY OF CABLE TERMINATIONS FOR MOST APPLICATIONS AND TO PREVENT ANY LIKELIHOOD OF ELECTRICAL SHOCK, EVEN WHEN THE SPEAKERS ARE USED WITH THE HIGHEST POWERED AMPLIFIERS. DO NOT USE TOOLS TO TIGHTEN THE BINDING POSTS.BREAK-INA LOUDSPEAKER IS A MECHANICAL DEVICE AND AS SUCH REQUIRES AN EXTENDED INITIAL PERIOD OF NORMAL USE DURING WHICH A NOTICEABLE IMPROVEMENT IN SOUND QUALITY WILL OCCUR. DO NOT ATTEMPT TO ACCELERATE THE BREAK-IN PROCESS BY PLAYING SINE WAVES, TONE SWEEPS, BREAK-IN CDS OF ANY SORT, OR OTHER GENERATED SIGNALS.CARE:FOR ALUMINUM PANELS USE A LINT-FREE SOFT CLOTH (PROVIDED IN ACCESSORY KIT). FOR PAINTED SURFACES, USE A PRODUCT SUCH AS MEGUIAR’S PROFESSIONAL FINALINSPECTION 34. DO NOT USE CLEANERS THAT CONTAIN AMMONIA, STRONG SOLVENTS, OR ABRASIVE MATERIALS. USE OF THESE CLEANERS CAN DEGRADE, SCRATCH, OR DESTROY THE FINISH.SPECIFICATIONSDESCRIPTION: 3-WAY (5 DRIVER) SEALED BOX ENCLOSUREDRIVER COMPLEMENT:1” MB D28 Diamond Coated Beryllium Dome Tweeter6” MAG6004RTC Graphene Nano-Tec Cone7” MAG7012RTC Graphene Nano-Tec Bass (x3)SENSITIVITY: 91dBIMPEDANCE: 4 OhmsFREQUENCY RESPONSE: 24 Hz – 50 kHzRECOMMENDED POWER: 20 - 500 WATTSDIMENSIONS: 48”H x 19” D x 13” W (120cm x 49cm x 34cm)WEIGHT: approx. 320 lbs. (145 kg.)LIMITED WARRANTYDEAR MAGICO PURCHASER,THIS PRODUCT HAS BEEN DESIGNED AND MANUFACTURED TO THE HIGHEST QUALITY STANDARDS. HOWEVER, IF SOMETHING DOES GO WRONG WITH THIS PRODUCT, MAGICO, LLC AND ITS NATIONAL DISTRIBUTORS WARRANT THE REPLACEMENT OF DEFECTIVE PARTS INCLUDING LABOR (EXCLUSIONS MAY APPLY) IN ANY COUNTRY SERVED BY AN OFFICIAL MAGICO, LLC DISTRIBUTOR. THIS LIMITED WARRANTY IS VALID FOR A PERIOD OF 5 YEARS FROM THE DATE OF PURCHASE.TERMS AND CONDITIONS1. THE WARRANTY IS LIMITED TO THE REPAIR OF THE EQUIPMENT. IN THE EVENT THAT THIS LOUDSPEAKER REQUIRES SERVICE, THE CUSTOMER MUST FIRST OBTAIN A RETURN AUTHORIZATION FROM MAGICO OR ITS AUTHORIZED DISTRIBUTOR. THE CUSTOMER IS RESPONSIBLE FOR RETURNING THE LOUDSPEAKER TO MAGICO OR ITS AUTHORIZED DISTRIBUTOR. IN THE EVENT THAT THE REPAIR IS DETERMINED TO BE UNDER WARRANTY, MAGICO WILL RETURN THE LOUDSPEAKER TO THE CUSTOMER AT NO CHARGE. EXCEPT AS INDICATED, NEITHER TRANSPORTATION, SHIPPING, NOR ANY OTHER COSTS, NOR ANY RISK FOR REMOVAL, TRANSPORTATION AND INSTALLATION OF PRODUCTS IS COVERED BY THIS WARRANTY.2. WITH THE EXCEPTION EXPLAINED BELOW, THIS WARRANTY IS ONLY VALID FOR THE ORIGINAL OWNER. IT IS NOT TRANSFERABLE. IT IS VALID ONLY WHEN PURCHASED FROM AN AUTHORIZED MAGICO DEALER. A VALID RECEIPT SHOWING THE PURCHASER’S NAME, DATE OF PURCHASE, AND DEALER INFORMATION MUST BE SUBMITTED WITH ALL WARRANTY CLAIMS.3. IN THE EVENT THAT THIS LOUDSPEAKER IS PURCHASED AS A USED OR TRADE-IN LOUDSPEAKER FROM AN AUTHORIZED MAGICO DEALER OR DISTRIBUTOR, THE SECOND OWNER SHALL RECEIVE THE BALANCE OF THE ORIGINAL WARRANTY BASED UPON THE ORIGINAL DATE OF PURCHASE. VALID RECEIPTS SHOWING THE PURCHASER’S NAME, DATE OF PURCHASE, AND DEALER INFORMATION FOR THE CURRENT OWNER AND THE ORIGINAL PURCHASE MUST BE SUBMITTED WITH ALL WARRANTY CLAIMS.4. THIS WARRANTY WILL NOT BE APPLICABLE IN CASES OTHER THAN DEFECTS IN MATERIALS AND/OR WORKMANSHIP AT THE TIME OF PURCHASE AND WILL NOT BE APPLICABLE FOR DAMAGES CAUSED BY INCORRECT INSTALLATION, CONNECTION OR PACKING, FOR DAMAGES CAUSED BY ANY USE OTHER THAN CORRECT USE DESCRIBED IN THE USER MANUAL, NEGLIGENCE, MODIFICATIONS, OR USE OF PARTS THAT ARE NOT MADE OR AUTHORIZED BY MAGICO, LLC, FOR DAMAGES CAUSED BY FAULTY OR UNSUITABLE ANCILLARY EQUIPMENT, FOR DAMAGES CAUSED BY ACCIDENTS, LIGHTNING, WATER, FIRE HEAT, EXTREME WEATHER CONDITION, WAR, PUBLIC DISTURBANCES OR ANY OTHER CAUSE BEYOND THE REASONABLE CONTROL OF MAGICO, LLC AND ITS APPOINTED DISTRIBUTORS, FOR PRODUCTS WHOSE SERIAL NUMBER HAS BEEN ALTERED, DELETED, REMOVED OR MADE ILLEGIBLE, IF REPAIRS OR MODIFICATIONS HAVE BEEN EXECUTED BY AN UNAUTHORIZED PERSON.5. THIS GUARANTEE COMPLEMENTS ANY NATIONAL/REGIONAL LAW OBLIGATIONS OF DEALERS OR NATIONAL DISTRIBUTORS AND DOES NOT AFFECT YOUR STATUTORY RIGHTS AS A CUSTOMER.6. UNAUTHORIZED DISMANTLING OF THIS PRODUCT WILL RENDER THIS WARRANTY VOID.7. MAGICO, LLC STRIVES TO MANUFACTURE THE VERY FINEST POSSIBLE EQUIPMENT, AND THEREFORE RESERVES THE RIGHT TO MAKE CHANGES OR IMPROVEMENTS WITHOUT NOTICE.SERIAL NUMBERSPLEASE TAKE THE TIME TO RECORD YOUR SPEAKERS’ SERIAL NUMBERS BELOW.DISCLAIMERMAGICO, LLC CREATED THIS MANUAL AND THE CONTAINED INFORMATION AVAILABLE ON AN "AS IS" BASIS. ALL WARRANTIES AND REPRESENTATIONS OF ANY KIND WITH REGARD TO SAID INFORMATION IS DISCLAIMED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE. UNDER NO CIRCUMSTANCES WILL MAGICO, LLC, OR ANY OF ITS OFFICERS OR EMPLOYEES BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY DAMAGES EVEN IF APPRISED OF THE LIKELIHOOD OF SUCH DAMAGES OCCURRING. MAGICO, LLC DOES NOT WARRANT THE INFORMATION AGAINST DEFICIENCIES OF ANY KIND.MAGICO, LLC3170 CORPORATE PLACEHAYWARD, CA 94545USAPHONE: +1.510.649.9700FAX: +1.510.323.4774EMAIL: ***************BUSINESS HOURS: 8AM - 4PM PACIFIC TIME© 2016 MAGICO, LLC。
网络广告分类
本公司监测六大网站三运营商未推出摩天楼广告。
IAB摩天楼广告模板：
前四类幻灯片广告、按钮广告、通栏广告和摩天楼广告统称 为网幅广告
网幅广告是以FLASH文件、GIF，JPG等格式建立的图象文件，定位在网页中， 大多用来表现广告内容，是互联网广告中最基本的广告形式，网幅广告分为三类： 静态、动态、和交互式。
举例：双击右图进行播放
十二、撕页广告
位于网页的角落，自动撕页，展示广告诉求后收回，鼠标触发。 特色：1、形式新穎，内容丰富。
2、强烈的视觉冲击特色，配合声音效果，观赏度极佳。 规格：它属于组合文件形式，大翻页文件不超过全屏广告规格，小图标文件 不超过移动图标规格。
举例：双击右图进行播放
十三、触动广告
鼠标点击触发，在文章页面展现，超大面积，适合全面的展现品牌形象。 特色：1、形式新穎，内容丰富。
2、强烈的视觉冲击特色，配合声音效果，观赏度极佳。
举例：双击右图进行播放
十四、游戏嵌入广告（In-game advertising）
通过FLASH小游戏展现商家诉求。 游戏嵌入式广告（In-game advertising）是指内嵌在游戏中的广告，它把游 戏变成发布广告的一种载体。它以游戏的用户群为基础，通过固定的条件，在游 戏中的适当的时间，在适当的位置出现广告。与普通的商业广告的不同，它所借 助的载体是游戏这种新型媒体。从游戏和广告的结合形式上看，游戏广告是一种 内嵌在游戏程序之中（In game）的广告。它在游戏场景中出现，在玩家玩游戏的 同时起到广告传播的作用。
松下相机产品手册说明书
FULL FRAMEA Better Life, A Better WorldGH5SNEVER MISS A DETAIL IN THE DARK• C4K 60p/50p with unlimited recording time • In-built V-Log recording• Dual Native ISO technology (ISO160-51200)• 4:2:2 10Bit and 400 Mbps All-Intra Recording • Suppressed rolling shutter• 240 fps slow motion VFR recording in full HD • Dual Native Technology ( ISO 400-25000), ISORange (160-51200)Body onlyPRP `1 52 500.0032 GBGH5FASTER THAN YOUR IMAGINATION• 180 fps slo-mo VFR recording in full HD.• 6k Photo capture unmissable moments 18mp/30 fps burst shooting.• Unlimited 4k 60p/50p video recording.• Accurate AF Tracking with new DFD technology.• High Picture Quality 20.3 mp MOS sensor without low pass filter.• 4k 4:2:2 10bit internal recording.•High durability magnesium alloy frame.PRP `1 14 800PRP `1 56 200.00GH5GA-KGH5LGA-KG95A BIG LEAPFOR YOUR CREATIVITY• 5 Stop 5 axis dual I.S.2• 2,360K-dot OLED electronic viewfinder with 0.74x magnification• Tilt-swivel touchscreen display • Native ISO range of 200-25,600• Depth from Defocus autofocus system • 9 frames per second continuous shooting with AFS, 6 fps with AFC • 4K/30p video recording • 4K Photo•Built-in Wi-Fi and Bluetooth Low EnergyBody with 14-140mm Lens DC-G95HGW-KPRP `1 09 990.00Body with 12-60mm LensDC-G95MGW-KPRP `94 990.0032 GB Battery4K RangeG85K with H-FS1442 lens`67 300.0032 GB BatteryULTIMATE HYBRID.FOR UNMATCHED STILLS AND VIDEO.• New 24.2-megapixel CMOS sensor • 6-stop 5-axis Dual I.S. 2• 4K 60p Video• High Resolution (96MP)• High Speed FHD Video (Max. 180 fps)•V-Log (Optional)DC-S1MGA-KPRP `2 67 990.00DC-S1GA-KPRP `1 99 990.00ULTIMATE RESOLUTION. PROFESSIONAL PERFORMANCE.• New 47.3-megapixel CMOS sensor • 6-stop 5-axis Dual I.S. 2• 4K 60p Video• High Resolution (187MP)• High Speed FHD Video (Max. 180 fps)•225 Area DFD AFDC-S1R MGA-K PRP `3 67 990.00DC-S1R GA-KPRP `2 99 990.0060P6.5 STOP WORLD’S FIRST 6K/24P MIRRORLESS CAMERA CERTIFIED BY NETFLIX.• 180 fps Slow motion VFR, Full HD 120p High Frame Rate Recording• 24.2 MP CMOS sensor with ISO 51200• ISO 640 and ISO 4000 Dual Native ISO • 14+ Stop Dynamic Range with V-Log •6.5 Stop 5-axis Dual I.S.2 stabilizationDC-S1H GW-KPRP `3 19 990.00PRP `87 600.00BatteryPRP `3 22 500.00PRP `76 990.00MDH3PRP `64 990.0032 GB BatteryCAMCORDER16 GBPRP `23 000.00PRP `20 250.00PRP `32 250.00PRP `35 000.00LEICA DG VARIO- ELMARITINTEREST.PROCESSING FEE.For warranty claims, please visit warranty.panasoniclumix.in/in, *********************.comService Helpline: 180****0373https:///4kimagingclub https:///4kimagingclubhttps:///panasonic4kimagingclubmypstore.inRegistered Office: Panasonic India Pvt. Ltd., 12th Floor, Ambience Tower, Ambience Island, NH-8, Gurgaon-122002, Haryana, India.Tel: +91-0124-4871300 / 4683800, Fax: +91-0124-4871333.*Te r m s & c o n d i t i o n s a p p l y .REGISTER AT: HTTPS://。
DMB使用手册
第5页 第5页
第6页 第6页 第7页 第8页
第9页 第9页 第9页
第 10 页 第 10 页 第 11 页 第 11 页
第 12 页 第 13 页 第 14 页 第 14 页
第 15 页
服务器储存任务包
--------------------------------- 第 15 页
权限管理
修改系统登陆密码
注:终端输出选择与终端 AV 输出窗口调整禁止用户调整, 错误设置会导致终端无法显示.
按
键移动光标进行上下选择。
按 键，从最后一个数字开始删除。 直接输入数字，*键为 IP 地址的“.”符号。 IP 地址：输入终端的 IP 地址
注：每个一终端 IP 都不能相同 网关：输入终端的网关 子网掩码:输入终端的子网掩码 DHCP 自动获取 IP 地址:为防止网络上的冲突,不建议使用 OK 键：进入/确认并保存 ESC 键：不保存返回
软件安装
设置服务器 IP
--------------------------------- 第 5 页
软件安装/启动 软件登陆
终端管理
M 终端分组 O 自动开关机设置增加终端.C Nhomakorabea网常见问题
素材管理
A 新建素材 Y 上传素材
审核素材
N 样式管理 导入样式 U 制作分屏 O LOGO 制作 滚动字幕属性
方雅dmb8635高清多媒体信息发布系统企业加强版操作手册述语构架机身安装终端设置终端ip遥控设置终端ip网络设置软件安装设置服务器ip终端管理终端分组素材管理新建素材样式管理导入样式logo制作任务编排制作播放内容任务包管理终端播放内容终端任务包权限管理修改系统登陆密码系统设置服务器ip的更改述语构架示意图终端安装注意
大蛇、长城、ICM、爱德美等新品
大蛇出品IM001 1/35 美国M3A3布拉德利骑兵战车大蛇（Orochi）是Takom（也就是大家俗称的三花）下面的一个子品牌，这台M3A3从放出风声到现在也有好一阵子了，月初的时候编辑部获得了新时模型提供的样品，下面就为大家展示一下。
编辑部收到的是豪华版产品，提供了一套金属拼装履带，普通版则为塑料履带。
履带之间的连接非常方便，也非常牢固，活动性很好。
豪华版附带的“大毒蛇”机炮金属炮管，造型精致。
一些小的工具扣都直接开在了车体上，省去了许多琐碎的环节，使这套模型总共只有8板主要零件，便于玩家的制作。
套件提供了简单的蚀刻片、漏喷板、水贴纸，“大毒蛇”炮上的防水布是橡胶材质。
铆钉开得非常细腻，不仅层次分明，连六边形的造型都清晰可见。
炮塔及车体上都开出了防滑纹，效果不错。
尾部舱门上也有防滑纹。
由于模型都是上下开模，因此斜面上的螺钉并不完全与表面垂直，厂家特地在流道上开出了一套铆钉，供玩家自行改造。
车首附加装甲的细节。
Takom的特色就是每款模型都附带一个兵人，拆弹员的形象杀肉用也很不错。
轮子和备用履带的细节也丝毫不马虎。
. All Rights Reserved.长城出品L1004 1/144 英国皇家空军“胜利者”B.2战略轰炸机“胜利者”轰炸机是英国于二战后设计研发的一款中程战略轰炸机，以高空高速的能力著称，是当时英国皇家空军的“3V轰炸机”之一。
机身及机翼这类需要粘合的地方都采用隐形水口的设计，将水口开在接合面上，方便制作者处理。
1/144比例小巧的驾驶舱。
机身上的刻线。
机翼上部有凸出的细节。
小巧的起落架舱内开出了条纹细节，不过推出孔开得比较碍眼。
机翼下部的刻线及细节。
尾部减速板可以制成打开的样子，因此提供了一个机舱内部细节的零件。
起落架细节也很精致。
透明件上需要上色的地方用磨砂的材质表现，方便玩家遮盖。
水贴纸。
. All Rights Reserved.ICM出品爱德美出品威望出品35403 1/35 二战德国Typ 2,5-32KzS 8轻型救火车48252 1/48 二战苏联乌-2/波-2VS轻型夜间轰炸机35636 1/35 苏联士兵（1979-1991）13279 1/35 美国M36B1 GMC坦克歼击车03082 1/35 德国乌尼莫克卡车03136 1/72 德国狐式装甲车03139 1/72 德国TPz-1轮式装甲车04889 1/32 英国英俊战士Mk.IF重型战斗机04895 1/32 德国F-4F“鬼怪”2战斗机测试涂装04907 1/72 AW101“灰背隼”直升机05130 1/720 美国海军“尼米兹”号航空母舰07423 1/24 依维柯Stralis卡车07455 1/16 彼得比尔特359拖头常规版. All Rights Reserved.青岛社出品牛魔王出品00995 1/72 日本航空自卫队“爱国者”3型导弹发射车8468 1/48 苏联伊-16 24型战斗机. All Rights Reserved.威骏出品田宫出品NB5041 1/350 中国海军056级轻型护卫舰（驻港部队）CB35163 1/35 二战英国伞兵部队用75毫米榴弹炮与1/4吨多功能车辆及拖载车CB35145 1/35 “大水牛”6×6除雷防护车附加格栅与空间装甲型AB3566 1/35 M46/M47坦克用T84E1可动履带（橡胶型）NB5049 1/350 美国海军陆战队AH-1W超级眼镜蛇攻击机30058 1/35 法国B1 bis重型坦克32581 1/48 英国“澳洲野狗”装甲车60325 1/32 美国F4U-1A“海盗”战斗机35340 1/35 德国四号坦克歼击车. All Rights Reserved.AK模型出品AKPROMO085 真实金属颜料套装AK3040 德国碎布迷彩上色套装AK3080 一战英国军服色套装AK3090 一战德国军服色套装AK3100 一战法国军服色套装AK4040 一战英国坦克涂装色套装AK4050 一战法国坦克涂装色套装AK模型最新推出了几款金属色涂料，将颜料像打蜡一样涂抹在模型上，颜色固定后进行抛光，就可以得到非常出色的金属效果。
巢NEST3期海报文字
传世百年的别墅典范――巢NEST3期海报文字P1精工别墅高端定制Ingenious villa superior life精密科技筑造Science and technology is constructed.世界名笔打造高品质的生活艺术，同样，巢NEST注重建筑的高雅内涵，不仅拥有华丽雅致的外观形象，而且拥有舒适温馨、节能环保的内涵空间。
噪音，热量散失，冷空气入侵，统统是对高品质生活的威胁，夹心复合墙体、冷热断桥平窗等创新科技，处处从细节着手，小到一门一窗、一砖一瓦都经过反复斟琢、精心挑选。
其百年如一日的卓越品质更是能长久的保障您的生活无忧。
与时间相抗衡Contend with time each other.拉菲是世界上最顶级的红酒，为了酿造出口味最好的红酒，坚持只使用最名贵的橡木酒桶。
好房子是奢侈品，优质的建筑材料才体现得出巢NEST得丰富内涵，太阳能综合利用，新风系统……而不计成本的材料应用，使得巢NEST无论是从视觉上还是手感上，都同样出类拔萃，高贵气质浑然天成。
在这里，居住一辈子只是个开始，传承百年才是经典。
只有优秀的建筑才能超越存在的价值，与时间抗衡。
不是品酒专家，分辨不出酒的好坏，真正的别墅鉴赏家，才会发现巢NEST品质卓越的建筑内涵。
挑战肉眼极限Challenge a limit景泰蓝的铜胎手工技术，上面每一根铜丝都细如发线。
且不说花纹怎么生动美妙，单想想那么多密密麻麻的铜丝没有一根不是专心一致粘上去的，就让人叹为观止了。
正是其细致的制作使得景泰蓝成为中国特有的名贵工艺品。
当巢NEST精细到连每一块墙面砖的摆放角度，都必须经过严格的计算，甚至墙角的隙缝误差，都精细到毫米的时候，才能挑战肉眼的极限。
如此兼顾美观与实用的精工建筑，哪怕经历百年沧桑，也历久弥新。
高贵身份象征Gentility symbol高贵的艺术境界与昂贵的制作材料完美结合，塑造了百达菲丽的经久不衰。
巢NEST，同样如此。
M3 宣传页-all(更新)
LM3S8962主板32bit ARM Cortex M3 CPU64KB Flash简介LM3S3748开发板是利尔达科技有限公司自行设计Stellaris 系列学习板，基于ARM Cortex M3内核的LM3S3748微控制器。
具有丰富的外设功能，集成了USB、CAN、SSI、UART、I2C、PWM、简介Stellaris系列三相无刷直流电机控制板是利尔达公司基于Cortex-M3的无刷直流电机控制板。
本Demo板将Stellaris微处理器卓越的优势和高灵活性Farichild Semiconductor的电源模块完美结合在一起。
可为三相GPRS通讯板M3控制板简介嵌入式GPRS数据传输模块是利尔达公司自行设计研发的基于Cortex M3内核的远程数据传输模块，具有使用方便，配置简单，传输高效，性能稳定等优点。
该模块提供RS232和RS485两路串口进行数据传输和配置接口，模块接到数据后通过GPRS数据传输模块系统框图LM3S2965主板LM3S2110CAN通讯子板LM3S2965开发板利尔达科技有限公司自行设计Stellaris系列学习板，采用ARM Cortex M3LM3S2965的微控制器，具有丰富的外设功能，集成了控LM3S6965开发板利尔达科技有限公司自行设计Stellaris系列学习ARM Cortex M3内核的LM3S6965的微控制器，该系列是全球首款拥有完全集成10/100Mbps以太网解决方案，将以太网媒体接入控层和物理(PHY)层完美结合在一起，标志着首次通过ARM Cortex-M3MCU实现了集成连接功能，而且还是唯一集成了10/100以MAC和PHY的ARM架构MCU。
除此之外还集成了PWM、ADC、I2C、等多种外设，而且开发板上集成了板载仿真器只需通过一条USB线就可集仿真下载调试、虚拟串口、供电于一身。
该开发板非常适合应用于需要使用以太网通信的领域。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
LM3S8962主板
32bit ARM Cortex M3 CPU
64KB Flash
简介
LM3S3748开发板是利尔达科技有限公司自行设计Stellaris 系列学习板，基于ARM Cortex M3内核的LM3S3748微控制器。
具有丰富的外设功能，集成了USB、CAN、SSI、UART、I2C、PWM、
简介
Stellaris系列三相无刷直流电机控制板是利尔达公司基于Cortex-M3的无刷直流电机控制板。
本Demo板将Stellaris微处理器卓越的优势和高灵活性Farichild Semiconductor的电源模块完美结合在一起。
可为三相
GPRS通讯板M3控制板简介
嵌入式GPRS数据传输模块
是利尔达公司自行设计研发的
基于Cortex M3内核的远程数据
传输模块，具有使用方便，配置
简单，传输高效，性能稳定等优
点。
该模块提供RS232和RS485
两路串口进行数据传输和配置
接口，模块接到数据后通过GPRS
数据传输模块系统框图
LM3S2965主板LM3S2110CAN通讯子板
LM3S2965开发板利尔达科
技有限公司自行设计Stellaris系
列学习板，采用ARM Cortex M3
LM3S2965的微控制器，
具有丰富的外设功能，集成了控
LM3S6965开发板利尔达科技有限公司自行设计Stellaris系列学习
ARM Cortex M3内核的
LM3S6965的微控制器，该系列是全球首款拥有完全集成10/100Mbps以太网解决方案，将以太网媒体接入控
层和物理(PHY)层完美结合
在一起，标志着首次通过ARM Cortex-M3MCU实现了集成连接功能，而且还是唯一集成了10/100以MAC和PHY的ARM架构MCU。
除此之外还集成了PWM、ADC、I2C、等多种外设，而且开发板上集成了板载仿真器只需通过一条USB
线就可集仿真下载调试、虚拟串口、供电于一身。
该开发板非常适合应用于需要使用以太网通信的领域。
32bit ARM Cortex M3 CPU
UART
SSI
PWM
I2C
JTAG
板载仿真器
FT2232和
LC4032
OLED屏
SPX3819
USB电源虚拟串口
LM3S6965
开发板功能
全面集成10/(MAC+PHY)以太网控制器的Stellaris LM3S6965微处理器
Micro SD卡插槽，并提供文件系统移植范例
256KB大容量Flash
64KB的SRAM
最高工作频率可达50MHZ
128x64点阵型OLED屏
应用领域：
●集成板载仿真器，
可对主芯片实时仿真，并且提供对一个外部芯片仿真接口
●集成一个虚拟串口
●用户按键、
●蜂鸣器
●提供双电源：
LM3S9B90主板LM3SLINK仿真器简介
LM3S9B90开发板利尔达科
技有限公司自行设计Stellaris系
列学习板，采用ARM Cortex M3
内核的LM3S9B90的微控制器，该
系列是全球首款拥有完全集成
10/100Mbps以太网解决方案，将
以太网媒体接入控制(MAC)层和
物理(PHY)层完美结合在一起，而
且带OTG的USB控制器，可以配
置成Host、Device、Host等多种
模式，还集成了PWM、ADC、I2C、
Timer、CAN等多种外设，是外设
最全的一个系列，此外提供一个仿真器，可以对主芯片进行仿真，并提供一个虚拟串口。
该开发板非常适合应用于需要使用以太网通信和USB通信的领域。
以
太
网LM3S9B90开发板系统框图
特点/开发板功能
全面集成10/(MAC+PHY)以太网控制器的Stellaris LM3S9B90微处理器
USB2.0全速OTG端口，可以设置成Host/Device/OTG 该芯片提供一个EPI接口，可扩展多种存储器
内置256KB大容量Flash
高达96KB的SRAM
最高工作频率可达80MHZ
应用领域：
●集成板载仿真器，使用FT2232和CPLD芯片LC4032
可对主芯片实时仿真，并且提供对一个外部芯片仿真接口
●集成一个虚拟串口(通过FT2232)
●用户按键、LED
●多达两个的CAN2.0A/B控制器
●中内置StellarisWare
LM3S1968开发板系统框图
应用领域：
●集成板载仿真器，
可对主芯片实时仿真，并提供对外部芯片仿真接口●集成一个虚拟串口（通过
●用户按键、LED
●蜂鸣器
●带标签的外露焊盘
该仿真器是利尔达科技有限公司自行研发设计Stellaris系列微控制器的专用仿真器，支持
这款直流有刷电机控制板是利尔达科技有限公司研发设Stellaris系列电机控制板，提供高达40A的持续电
有刷直流电机，提供具有变速控制能力高性能
网络功能，而且还具有丰富的控制选件集和传感器接口，如模拟和正交编码器接口等，适用于常规的直流电机的控制。
该设计套件采用高度优化的软件和功能强大的32位
系列LM3S2616微处理器来实施开环速度控制及闭环速度控制、定位或电机电流，具有控制域网络和高级运动控
32bit ARM Cortex M3 CPU
64KB Flash控制器局域
直流有刷电机控制板系统框图
开发板功能
有刷直流电机的H桥控制（15KHz PWM频率）用于速度控制的两个选件（工业标准R-C伺服类PWM接口）
控制域网络CAN接口进行配置、实时监测电流、电压、速度、通过CAN加载固件
显示控制板LM3S6918底板
嵌入式智能显示控制板
（IDM）提供了一套基于32位
Cortex-M3微处理器的完
整的开放式调试型且能够连接
到以太网的图形触摸屏用户接
口设计解决方案。
该方案包含必
须的软件和硬件，能够方便用户
在满足自己的设计需求下进行
二次开发。
IDM可选择进行工业
以太网（PoE）或直流电源输入，
该设计方案还预留了其他
串行连接选择，以便在嵌入式控
制设备中轻松实施人机接口
（HMI）触摸显示控制板。
LSD-IDM3S6918-01系统框图
QVGA LCD触摸屏显示器
位色彩，2.8英寸QVGA240X320像素白色LED背光，带有电阻式触摸面板
以太网和串行连接选项
10/100M以太网，自动MDI/MDIX和流量
指示LED
排针可提供TXD和RXD信号(RS232信号电平
256KB片上闪存和64KB片上SRAM的高性能
LM3S6918微处理器
灵活的接口和终端接线盒连接
MicroSD插槽、继电器输出、四个ADC接线盒灵活的电源选件
以太网供电（符合IEEE802.3af标准）
24V直流电源插孔、5V直流终端
S2E主板S2E底板+主板
嵌入式串口转以太网控制
器是一款具有高效性能并集成
Cortex-M3微处理器的串
行至以太网控制器。
该控制器的
核心是高度集成的32位Stellaris
ARM Cortex-M3微处
50MHz性能和96K
快速单周期片上闪存及32K
内存，可高效处理网络流
系列微处理器采用
封装，并集成了片上
典型应用图
支持静态IP地址或DHCP的IP配置
用于接入串行端口的Telnet服务器
用于模块配置的WEB服务器
用于设备发现的UDP响应器（uPnP设备）
用于以太网串行端口扩展器的Telnet客户端
以太网远程固件升级。