EE2225中文资料
AFG-2225波形发生器中文说明书
Output Terminals
/
Channel select key
Number pad Operation keys Output key
Power switch
LCD 显示
功能键: F1~F5 返回键
TFT 彩色 LCD 显示, 320 x 240 分辨率 位于 LCD 屏右侧，用于功能激活
固纬电子实业股份有限公司 台湾台北县土城市中兴路 7-1 号
目录
目录
安全说明.......................................................... 2 产品介绍.......................................................... 6
在移动保险丝或保险丝座时连接器定会被损坏，然而将带有裸线的插头插入火 线插座是非常危险的。若需重复连接，必须严格按照本手册说明操作。
5
产品介绍
AFG-2225 操作手册
本章节介绍了信号发生器的主要特点、外观、设置过 程和开机。
主要特点
型号 AFG-2225 性能
特点
频宽
25MHz • DDS 信号发生器系列 • 全频段 1μHz 高频分辨率 • 20ppm 频率稳定度 • 任意波形能力 • 120 MSa/s 采样率 • 60MSa/s 重复率 • 4k 点波形长度 • 10 组 4k 的波形存储器 • 显示真实波形输出 • 用户定义输出部分 • DWR(直接波形重建)能力 • 无需 PC 就可编辑波形 • 正弦波, 方波, 斜波, 脉冲波, 噪声波标准波形 • 内部和外部 LIN/LOG 扫描，带标记输出 • 内部/外部 AM, FM, PM, FSK,SUM 调制 • 内部和外部触发的脉冲串信号，无标记输出 • 存储/调取 10 组设置存储器 • 输出过载保护
EE22
EE22是一款带数字型插拔测量探头的温湿度变送器，专为洁净空间 和特殊工业厂房而设计。插拔探头的校准数据保存在探头内的微处 理芯片中，任何两台变送器在互换数字探头后，均不影响测量结 果。性能卓越的HC105型湿敏元件、精确的校准方法和最新的微处 理器技术保证了在全量程范围内，仪表能够获得最佳的长期稳定性 和精确的测量结果。
Φ13（0.51＂）
25 （ 1＂ ）
163 （6.4＂）
针对恶劣的工业环境，EE22的所有型号都可配置坚 固耐用的金属外壳。 订货向导中的代码“M”代表金属外壳，包括机体和 可更换探头两部分。 圆滑流畅的外形设计，使其同样可应用于洁净车间。
RH&T分离式 （固定探头） EE22-xFTx2x
（1＂） （2＂） （0.7＂）
典型应用
电子半导体工业 各行业洁净厂房 烟草工业 环境试验箱 微电子工业
29
特点
可更换探头 探头可延伸至10m 测量范围0...100% RH / -40...80℃
可选显示 校准可溯源 节约成本，温湿度探头循环校准
EE22
安装尺寸（mm）
聚碳酸酯外壳
135 （5.3＂）
50 （2＂）
金属外壳
135 （5.3＂）
为满足特殊的安装测量要求，EE22变送器允许将测量探头和变送器 本体置于不同的安装区域内，然后通过专用连接电缆再将它们连接 起来，形成分体式结构，电缆长度有2米，5米，10米三种规格，探 头承受的最高工作温度为80℃。变送器测量输出信号可以是0-1 / 5 / 10V DC的电压信号，也可以是4-20mA DC的电流信号，多种温度 量程可供用户自由选择。
分体探头： -40...80℃
精度
EETUQ2A272KJ中文资料(panasonic)中文数据手册「EasyDatasheet - 矽搜」
00 Nov. 2012
芯片中文手册,看全文,戳
铝电解电容器/ UQ
■ 标准产品
耐力：85°C 2000ħ
机箱尺寸
W.V.
Cap.
（120赫兹） Dia.
长度
(±20 %)
型号
PET套
码头长度
4.0 mm
（无顶板）
规范
最小包装台数
波纹
tan δ
当前
（120赫兹）
（120赫兹） (+20 °C)
■ 纹波电流频率修正系数
额定电压
16 V.DC to 100 V.DC /C.F. 160 V.DC to 450 V.DC /C.F.
频率（Hz）
50
60
100
120
500
1k
10 k可
0.93
0.95
0.99
1.00
1.05
1.08
1.15
0.75
0.80
0.95
1.00
1.20
1.25
1.40
0.8
4.0±0.5 2.0 max. Terminal
(t=0.8)
(3.5)
1.5±0.2
Top of spin
Standard terminal type doesnot require terminal trimming process.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.
E212中文资料
• RED & • GREEN • RED & • YELLOW • GREEN & • YELLOW
Hale Waihona Puke 56E211
C
7
E212
D
70
Telephone: 781-935-4442 Fax: 781-938-5867
sales@ Engineering Catalog 169
Line No. Part No. E231 Lens White Diffused Luminous Intensity at 20mA Minimum Maximum 100mcd 40mcd 300mcd 80mcd 300mcd 80mcd 100mcd 40mcd 300mcd 80mcd 700mcd 200mcd 700mcd 200mcd 300mcd 80mcd Viewing Angle 2θ½ θ 60° 60° 30° 30° 24° 24° 24° 24° Forward Voltage at 20mA Typical Maximum 1.85V 2.20V 1.85V 2.20V 1.85V 2.20V 1.85V 2.20V 2.5V 2.5V 2.5V 2.5V 2.5V 2.5V 2.5V 2.5V Peak Wave Length at 20mA 660nm 565nm 660nm 565nm 660nm 565nm 660nm 565nm Leads Drawing A
• RED & • GREEN • RED & • GREEN • RED & • YELLOW • GREEN & • YELLOW
10
11
E204
C
VCO190-2225TY中文资料
VCO Product SpecificationModel:VCO190-2225T(Y) Rev:P2 Date:5/15/2006Customer:SIRENZA MICRODEVICES, INC.Operating Temperature Range:(-35 ° to 85 ° C)RoHS CompliantTo order models as RoHS Compliant add "Y" suffix to basemodel number.Parameter Min Typ Max Units X RemarksFrequency Range - 195022252500MHz XTuning Voltage:1950 MHz 0.51Vdc X2500 MHz 8.511Vdc XTuning Sensitivity - 5070110MHz/V XOutput Power - -214dBm XOutput Phase Noise:10 kHz -95-89dBc/Hz100 kHz -115-109dBc/Hz XPower Supply - 4.755 5.25VoltsSupply Current - 1417mA XHarmonic Suppression:2nd Harmonic -15-8dBc X3rd Harmonic -18-10dBc XSpurious (Non-Harmonic) - -90dBcFrequency Pushing - 4.75-5.25 V 36MHz p-pFrequency Pulling - 12 dB RL 58MHz p-pTuning Port Capacitance - 22pFOutput Impedance - 50Package InformationPackage Type: T(0.5 x 0.5 x 0.156 inches)Drawing Number: 60035CommentsX Indicates parameter to be tested 100% in productionPerformance tests and ratings for Sirenza Microdevices'products were performed internally by Sirenza and measured using specific computer systems and/or components and reflect the approximate performance of the the products as measured by those tests.Any difference in circuit implementation,test software,or test equipment may affect actual performance.The information provided herein is believed to be reliable at press time and Sirenza Microdevices assumes no responsibility for the use of this information.All such use shall be entirely at the user's own risk.Prices and specifications for Sirenza Microdevices'products are subject to change without notice.Buyers should consult Sirenza Microdevices'standard terms and conditions of sale for Sirenza's limited warranty with regard to its products.These products may be patented or include patented technology.No patent rights or licenses to any of the circuits described herein are implied or granted to any third party.Sirenza Microdevices does not authorize or warrant any product for use in life-support devices and/or systems.Sirenza Microdevices,Inc.。
CB2ZMU5115533290653中文资料
D200GHz WDM Filter Components for OADMFeatures• 64GHz clear channel passband• ITU and custom wavelengths • Deep reflection isolation for OADM• Accuratewavelength centering• High adjacent channel transmission isolation• Low express channel loss • Flat transmission passband for cascading • Excellenttemperature stability Options • 66GHz clear channel passband• Custom wavelength• Low chromatic dispersion version• Compact packaging: 3.2mm diameter• Rugged packaging Applications • Add/drop multiplexing • Metro and long-haul WDMCompliance • GR-1221 qualified • RoHS compliant (5/6) Bookham narrowband filters leverage theproprietary Advanced Energetic Deposition (AED) process to produce the industry’s best banded filter solution. The AED process features state-of-the-art layer thickness control to produce thin-film interference filters that are unparalleled for optical add/drop multiplexing (OADM) WDM applications. A range of 200GHz single channel filters are available. 200 Standard This product is intended for construction of multiplexerand demultiplexer systems. It provides high performance and lowest cost.200 OADM This product features improved performance for reflection isolation, transmission isolation and chromatic dispersion. This part is designed for more demanding applications such as channel by channel optical add/drop multiplexing or lower chromatic dispersion mux/demux designs.Standard 5.5mm diameter packaging is available with the boot/length specification needed to meet your application. The optional compact packaging has diameter of only 3.2mm. All Bookham filter components are Telcordia GR-1221 qualified and 5/6 RoHS compliant.DStorage Temperature a Loss includes connector pair.bAt edge of clear channel passband.ominal overall length. Standard package length without boots nominally 35mm.mm-40 to 85Dimensions c(standard packaging)5.5 (Ø) x 51 (L)°CcN Example Performance 200GHz OADM filter performance -5-4.5-4-3.5-3-2.5-2-1.5-1-0.50Wavelength (nm)L o s s (d B )Transmission ReflectionDNorth AmericaBookham WorldwideHeadquarters2584 Junction Ave.San JoseCA 95134USA• Tel: +1 408 919 1500• Fax: +1 408 919 6083EuropePaignton OfficeBrixham RoadPaigntonDevonTQ4 7BEUnited Kingdom• Tel: +44 (0) 1803 66 2000• Fax: +44 (0) 1803 66 2801AsiaShenzhen Office2 Phoenix RoadFutian Free Trade ZoneShenzhen 518038China• Tel: +86 755 33305888• Fax: +86 755 33305805+86 755 33305807sales@Important NoticePerformance figures, data and anyillustrative material provided in this datasheet are typical and must be specificallyconfirmed in writing by Bookham beforethey become applicable to any particularorder or contract. In accordance with theBookham policy of continuousimprovement specifications may changewithout notice. The publication ofinformation in this data sheet does notimply freedom from patent or otherprotective rights of Bookham or others.Further details are available from anyBookham sales representative.200G_060320。
NTE222资料
.190 (4.82)
.030 (.762)Hale Waihona Puke .500 (12.7) Min
.018 (0.45) Dia Gate 2 Drain Gate 1
45° Source/Case .040 (1.02)
Parameter OFF Characteristics Drain–Source Breakdown Voltage Gate 1–Source Breakdown Voltage Gate 2–Source Breakdown Voltage Gate 1 Leakage Current Gate 2 Leakage Current Gate 1 to Source Cutoff Voltage Gate 2 to Source Cutoff Voltage ON Characteristics (Note 2) Zero–Gate–Voltage Drain Current Small–Signal Characteristics Forward Transfer Admittance |Yfs| VDS = 15V, VG2S = 4V, VG1S = 0V, f = 1kHz, Note 3 10 – 22 mmhos IDSS VDS = 15V, VG2S = 4V, VG1S = 0V 6 – 30 mA V(BR)DSX ID = 10µA, VG1 = VG2 = –5V 25 ±6 ±6 – – –0.5 –0.2 – – – – – – – – ±30 ±30 ±10 ±10 –4.0 –4.0 V V V nA nA V V V(BR)G1SO IG1 = ±10mA, Note 1 V(BR)G2SO IG2 = ±10mA, Note 1 IG1SS IG2SS VG1S(off) VG2S(off) VG1S = ±5V, VG2S = VDS = 0 VG2S = ±5V, VG1S = VDS = 0 VDS = 15V, VG2S = 4V, ID = 20µA VDS = 15V, VG1S = 0V, ID = 20µA Symbol Test Conditions Min Typ Max Unit
ADM202EAN中文资料
4.5 5.0 5.5
2.0 3.0
15
18
0.8 2.4
0.4 3.5
0.01 ± 10
–30
+30
0.4 0.8
1.1 2.4
0.7
3
5
7
± 5.0 ± 9.0
300 ± 15 ± 60
230
0.3 1
0.6 1
1.2 1.5
3
10
30
EM IMMUNITTY ESD Protection (I/O pins)
V
IOUT = 3.2 mA
V
IOUT = –1 mA
µA
TIN = GND to VCC
V V V V kΩ
Volts
Ω mA
All Transmitter Outputs
Loaded with 3 kΩ to Ground VCC = 0 V, VOUT = ± 2 V
kbps
RL = 3 kΩ to 7 kΩ, CL = 50 pF to 2500 pF
EFT Protection (I/O pins) EMI Immunity
Specifications subject to change without notice.
± 15 ± 15 ± 8 kV ±2
10
Volts mA mA
No Load RL = 3 kΩ to GND
V
TIN
V
TIN
The ADM202E and ADM1181A conform to the EIA-232E and CCITT V.28 specifications and operate at data rates up to 230 kbps.