AG-16080AGA中文资料
1608芯片
1608芯片
1608芯片是一种封装形式的电子元器件，其尺寸为16mm x 8mm。
该芯片具有多种功能，可以被广泛应用于不同的电子设备中。
首先，1608芯片具有很高的集成度，可以集成多个功能模块于一个芯片中。
这意味着在电路板上使用1608芯片时，可以减少元器件数量，从而降低系统成本并提高电路板的可靠性。
其次，1608芯片具有较高的性能。
它可以提供较高的计算速度和较大的存储容量，从而满足对高性能处理和大容量数据存储的需求。
此外，它还可以同时处理多个任务，提高系统的效率。
除此之外，1608芯片还具有较低的功耗。
它采用先进的制程工艺和功耗优化设计，可以在低功耗情况下实现高性能的运算和处理。
这使得1608芯片非常适合于便携式电子设备，如智能手机、平板电脑和可穿戴设备等。
1608芯片还具有较好的可靠性和稳定性。
它采用高质量的材料和生产工艺，经过严格的测试和筛选，以确保在各种条件下均能稳定运行。
因此，它可以满足各种严苛的工作环境和使用场景下的要求。
最后，1608芯片具有丰富的接口和通信功能。
它支持多种通信协议和接口标准，如UART、SPI、I2C、USB等，可以方便地接入其他设备和传输数据。
这进一步扩展了1608芯片的
应用范围，使其可以与其他设备进行联网和互联互通。
总之，1608芯片是一种功能强大、性能优良、功耗低、可靠稳定的电子元器件。
它在电子设备中有着广泛的应用，可以提供高性能的运算和处理能力，满足不同领域的需求。
随着科技的不断发展，相信1608芯片的性能将会不断提升，为各种电子设备带来更多的创新和进步。
丹福斯高标准钢管适配器产品简介说明书
Welcome to the higher standard for steel adapters BrochureWelcome to the higher standard for steel adaptersHigher pressure.Higher performance.Beyond SAE certified.Danfoss expands your possibilities.With more than 3000 steel adapter part numbers globally, Danfoss has a wide variation of configurations with large portfolio of ORFS, JIC, BSPP , NPTF, and manyother terminal ends.Expand the equation.Same exceptional Danfoss adapters —now with outstanding corrosion resistance.Achieve operating pressures up to 125% more than SAE.Dura-Kote plating technology.Danfoss Competitor B Competitor Pan assembly that can perform up to 125% greater operating pressureCarbon steel corrosion protection This is a comparison of current carbon steel adaptersafter 650-hours of exposure to salt spray testing which far exceeds the SAE standard of 72-hours. Carbon steelfluid conveyance products protected with Danfoss’Dura-Kote plating technology resist rust longer than other carbon steel products available today.Discover the additional value of using a Danfoss system of products designed to work together to achieve even higher operating pressures. When Danfoss hoses are combined with Danfoss 1A or 4S/6S fittings and Danfoss adapters, assemblies can perform up to 125% higher pressures than the SAE rating.Danfoss adapters now come with Dura-Kote ® plating, which gives you up to 1,000 hours of corrosion resistance. Dura-Kote is an innovative plating technology for steel adapters, offering more corrosive protection for longer life, lower replacement costs, and improved appearance. This corrosion protection decreases the likelihood of leaking, meaning less equipment downtime and greater productivity. Plus, there are no compatibility issues with Dura-Kote plating. The Danfoss adapters you rely on today will look, feel, and perform exactly the same.Many companies offer extra plating services and special requests to enhance corrosion resistance. Requesting extra services can delay your order, complicate delivery, and add significantly to your costs. That is why Danfoss has responded to the needs of the market and simplified the entire process. With Dura-Kote plating now standard on Danfoss adapters, you’ll get products that look better, last longer, and cost less to maintain, which gives you and your customers one less thing to worry about. ++=Same form and functional capabilities Same torque values and pressure ratings Same silver appearance Same procedures for assemblyFor over 90 years, Danfoss has continued to manufacture and supply the highest performing quick disconnect couplings for customers globally. Danfoss’ quality and performance are never compromised when it comes to engineering and manufacturing its full line of quick disconnect couplings. From traditional industry standards to custom couplings for the next generation of emerging markets and new advanced technologies, Danfoss continues to provide quick disconnect coupling solutions to meet your demands. Quick Disconnect Coupling applications:• Hydraulic applications in construction, agriculture, etc. • Fluid transfer • Liquid cooling • Pneumatic • Chemical • Oil and Gas • Aerospace • Medical • Food and Beverage • Law enforcement/rescueCheck out our complete portfolio of Quick Disconnect Couplings found in our catalog at .Literature number: AF435258198969en-000101Patented STC Snap-To-Connect products are threadless connectors that keep equipment up and running longer with simple, leak-free connections.Danfoss has the broadest range of threadless connectors in the industry. Our patented STC technology excels in rigorous mobile application in agriculture, construction, forestry, transportation, utility, and lawn and turf. Because of their easy installation — even in confined spaces — and virtually zero-leak performance (per SAE J1176), more than 25 million STC connections are currently in use worldwide.STC benefits:• Fast reliable one-hand connections requiring no assembly tools • Eliminates cross-threading, over or undertorquing, and hose twisting • Virtually zero leak performance • Direct porting eliminates adapters to maximize cost savings • Resists external contamination • Allows easy disconnection with release toolA full list of available STC products can be found in our catalog at .Literature number: AF444058468933en-000101Making the right connections is easy with Danfoss’ Waltech metric tube fittings. A variety of available sizes and configurations make Danfoss’ metric tube fittings a simple, flexible and cost-effective solution for many applications. With three unique systems — including Walpro ®, WalringPlus ®, and Walform ® — each tube fitting is manufacturered to meet DIN 2353 and ISO 8434-1 standards and withstand pressure and corrosion with best-in-class performance. Metric tube fitting applications:• Harvester/balers • Machine tool • Hydraulic presses • Excavators • Loaders • Mining equipment • Mining equipment • Concrete pumpers • Off-shore equipmentLearn more about Danfoss’ entire line of metric tube fittings by reviewing our Waltech Metric Tube Fittings catalog at .Literature number: AF403661682130en-000201Regardless of the job, Danfoss has the right products to meet the challenge every time.Additional products available from Danfoss.Danfoss Quick Disconnect CouplingsWaltech Metric Tube FittingsDanfoss STC Snap-To-ConnectWalpro WalformWalringPlusAD440177948096en-000101© Danfoss | Power Solutions | April 2023Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility for possible errors in catalogues, brochures, videos and other material. Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or function of the product. All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.Danfoss Power Solutions, Nordborgvej 81, 6430 Nordborg, Denmark, Tel. +45 74 88 22 22, Fax +45 74 65 25 80,E-mail:****************。
粉红贴片式发光二极管XL-1608UPC-06产品承认书说明书
产品承认书产品名称：0603-T0.6粉红贴片式发光二极管产品型号：XL-1608UPC-06客户名称：客户料号：承认日期：深圳市成兴光电子科技有限公司制定审核核准客户承认栏确认审核核准一、产品描述：●外观尺寸(L/W/H): 1.6x0.8x0.6mm●颜色:粉红●胶体:粉色●EIA规范标准包装●环保产品，符合ROHS要求●适用于自动贴片机●适用于红外线回流焊制程二、外形尺寸及建议焊盘尺寸：C athode A nodeG reen m ark建议焊盘尺寸备注：1.单位:毫米（mm）2.公差：如无特别标注则为±0.10mm三、建议焊接温度曲线：有铅制程无铅制程四、最大绝对额定值（Ta=25℃）：参数符号最大额定值单位消耗功率Pd80mW最大脉冲电流(1/10占空比,0.1ms脉宽)I FP100mA正向直流工作电流I F25mA 反向电压V R5V 工作环境温度Topr-30°C~+85°C存储环境温度Tstg-40°C~+90°C焊接条件Tsol 回流焊:260°C,10s 手动焊:300°C,3s五、光电参数（Ta=25℃）：参数符号最小值代表值最大值单位测试条件光强IV 90---150mcd IF =5mA 半光强视角2θ1/2---120---deg IF =5mA 正向电压VF 2.8--- 3.1V IF =5mA 反向电流IR------1uAVR=5V亮度分档：代码最小值最大值单位测试条件M790110mcd IF=5mAM8110130M9130150电压分档：代码最小值最大值单位测试条件W12 2.8 2.9VIF=5mAW13 2.9 3.0W143.03.1色温分档：代码最小值最大值单位测试条件DF319143573K IF=5mADF421065517DF5278812707六、光电参数代表值特征曲线：注:如无另外注明，测试环境温度为25+3 C七、标签标识：CAT ：光强（mcd ）HUE ：XY REF ：电压（V ）误差范围a.Luminous Intensity:±15%b.HUE:±0.003c.Forward Voltage:±0.1V八、包装载带与圆盘尺寸：φ13.0U ser Feed D irection备注:1.尺寸单位为毫米(mm)；2.尺寸公差如无标注，为±0.15mm ；AAA-A剖面图φ60九、圆盘及载带卷出方向及空穴规格：尾端空壳载带的组合开始端空壳载带的组合盖带与空壳载带的组合十、内包装及外包装：内标签圆盘干燥剂防潮防静电袋5cartons/box外标签抽真空、热封10bags/carton至少160mm盖带和装有零件部分至少160mm盖带和至少160mm独立盖带或十一、信赖性实验：测试项目测试条件测试次数参考标准失效判定标准失效LED 数量（PCS ）防潮等级1.回流焊最高温度=260℃,10秒，2次回流焊；2.回流焊之前存储条件：30℃，相对湿度=70%，168H；-JEITAED-4701300.301﹟10/22焊接信赖性（无铅回流焊）回流焊最高温度=245±5℃，5秒（无铅回流焊）-JEITAED-4701303303A ﹟20/22冷热循环-40℃30分钟~25℃5分钟~100℃30分钟~25℃5分钟300个循环JESD22-A104﹟10/22冷热冲击-35℃15分钟转换时间3分钟85℃15分钟300个循环JESD22-A106﹟10/22高温存储Ta=100℃1000小时JESD22-A103﹟10/22低温存储Ta=-40℃1000小时JESD22-A119﹟10/22常温老化Ta=25℃IF=20mA1000小时JESD22-A108﹟10/22（2）失效标准★U.S.L :规格上限L.S.L :规格下限标准﹟项目测试条件失效标准﹟1正向电压(V F )I F =20mA ＞U.S.L*1.1光强（IV ）I F =20mA ＜L.S.L*0.7反向电流(I R )V R =5V ＞U.S.L*2.0﹟2焊接可靠性/锡膏覆盖焊盘比例小于95%十二、使用注意事项：◆使用：1.过高的温度会影响LED的亮度以及其他性能，所以为使LED有较好的性能表现，应将LED远离热源。
1608全彩共阳-雾面胶体 用途参数
承认书SPECIFICATION FOR APPROVAL 客户Customer：客户品号Customer P/N：鑫光硕品号Xgs Model： ＸＧＳ－ＰＢ１６０８ＵＥＵＧＵＢ－ＪＧ０４－Ａ规格Specification:１６０８全彩共阳－雾面胶体 制作Prepared By：李忠审核Checked By：Customer Confirmation客户确认采购部Pur Dept By品质部QA Dept By工程部E ng Dept By深圳市鑫光硕科技有限公司SHEN ZHEN XIN GUANG SHUO TECHNOLOGY CO.,LTD公司地址：广东省深圳市宝安区沙井万丰村前路31号8楼一厂地址：广东省深圳市龙岗区嶂背创业二路18-1号·Customer:Technical Data SheetPN:XGS-PB1608UEUGUB-JG04-AFor:IF=20mAContents1.Features2.Applications3.Package dimensions4.Absolute maximum rating5.Electrical optical characteristics6.BIN range7.Package label8.Soldering pad dimensions9.Soldering conditions10.Package tape specifications11.Typical electro-optical characteristics curves12.Reliability test items and conditions13.Cautions14.NotePart No.XGS-PB1608UEUGUB-JG04-AEmitted Color Red Green Blue Len's Color White Diffused Chip Material AlGaInP InGaN InGaN----◆Features:Compatible with automatic placement equipmentCompatible with reflow solder processLow power consumption and wide viewing angleThis product doesn’t contain restriction Substance,comply ROHS standard.◆Applications:Automotive and TelecommunicationFlat backlight for LCD,switch and symbol in telephone and faxGeneral use for indicators◆Package Dimensions:Unit:mmTolerance:±0.1 Electrodes:Au PlatingEncapsulating Resin:Epoxy ResinPackage:BT Resin◆Absolute Maximum Rating（Ta=25℃）Parameter SymbolValueUnit R G BPower Dissipation P d608080MwPulse Forward Current I FP303030mADC Forward Current I F20mAReverse V oltage V R5V Operating Temperature Range Topr-40℃～85℃℃Storage Temperature Range Tstg-40℃～100℃℃FP≤≤◆Electrical Optical Characteristics（Ta=25℃）Parameter Symbol Min Typ.Max.Unit TestConditionLuminous Intensity I VRed220300380mcd I F=20mA Green5506801000Blue150280400Forward V oltage VFRed 1.7 2.0 2.5V I F=20mA Green 2.8 3.1 3.4Blue 2.8 3.1 3.4Reverse Current I R Red----10uA V R=5VDominant WavelengthλdRed615620630nm I F=20mA Green515525530Blue460470475Spectral Line Half WidthΔλRed--20--nm I F=20mA Green--30--Blue--30--Viewing Angle2θ1/2/--120--Deg.I F=20mA Notes:1.Tolerance of Luminous Intensity±10%2.Tolerance of Dominant Wavelength±2nm3.Tolerance of Forward Voltage±0.05V4.Luminous Intensity is measured by XGS’s equipment on bare chips◆Soldering Pad Dimensions:◆Soldering Conditions (Maximum allowable soldering conditions)Reflow soldering profile<Pb-free solder>T e m p e r a t u r e•Reflow soldering should not be done more than two times.•Do not stress its resin while soldering.•After soldering,do not warp the circuit board.◆Package Tape Specifications:(4000pcs/Reel)◆Dimensions of Tape (Unit:mm)◆Arrangement of Tape(Unit:mm)Empty parts Empty parts Feeding DirectionLoaded Parts SEC.A-A◆Typical Electro-Optical Characteristics Curves：◆Reliability(1)Test Items and ConditionsNO Test Item Test Conditions Sample Ac/ Re1Temperature Cycle -40±5℃→25±5℃→100±5℃→25±5℃(30min，5min，30min，5min)100Cycles200/12High Temperature Storage Ta：100±5℃Test time=1000HRS(-24HRS,+72HRS)200/13High Temperature AndHigh Humidity WorkingTa：85±5℃，R H:85±5%，IF=15mATest time=500HRS(-24HRS,+72HRS)200/14Low Temperature Storage Ta：-40±5℃Test time=1000HRS(-24HRS,+72HRS)200/15Operating Life Test Connect with a power IF=20mATa=Under room temperatureTest time=1000HRS(-24HRS,+72HRS)200/16Thermal Shock -40±5℃→100±5℃(15min，15min)100Cycles200/17IR-Reflow Pb-Free Process①80℃②100℃③120℃④160℃⑤170℃⑥235℃⑦270℃⑧255℃，60cm/min，2times200/1(2)Criteria of judging the damageItem Symbol Test condition Criteria for judgement Min.Max.Forward voltage VF IF=Test Current/U.S.L*1.1 Reverse current IR VR=5V/15uA LuminousintensityIV IF=Test Current L.S.L*0.7/ Wave lengthλD/λP IF=Test Current/U.S.L±2nm Appearance/View check No mechanical damage *U.S.L:Upper standard level L.S.L:Lower standard level◆Storage and application notices1.Storage1.Calculated shelf life in sealed bag:12months at＜30℃and＜90%relative humidity(RH)2.1TOP LED:After bag is opened,devices that will be subjected to reflow solder or other high temperatureprocess must be：a)Mounted within:168hours of factory conditions≤30℃/60%RH,orb)Stored at ambient of＜20%RH2.2CHIP LED:After bag is opened,devices that will be subjected to reflow solder or other hightemperature process must be：a)Mounted within:one year of factory conditions≤30℃/60%RH,orb)Stored at ambient of＜20%RH3.Device require bake,before mounting,if:a)Humidity indicator Card reads＞10%when read at25±5℃b)Above conditions are not metBaking condition:24hours at60±3℃and＜5%RH4．The internal and esterand boxes can not be contacted with ground to prevent absorption of moisture; 5．No acid,alkali,salt,corrosive and explosive gas;away from sunlight and keep the environment clean; 2.Application1．Do not use any unknown chemical liquid to clean LED,it will damage the LED resin surface;use the alcohol under the room temperature if necessary but less than1min,or use the ultrasonic cleaning with proper characters,such as correct power,frequency,etc;2．Do not touch the epoxy resin area when carrying LEDs by tweezers(as the following pictures), especially after the soldering process,the epoxy resin will turn to soft,the internal instruction will be damaged by the tweezers which cause the electric character’s failure;nozzle is recommended by usingSMT mounting.Correct Incorrect 3．Soldering iron:double-side soldering iron with power of less than25W;soldering temperature:less than300℃;soldering time:less than3sec.;1time completed is recommended,if the2nd soldering process isrequested,3mins must be left to ensure the high temperature status can return to room temperature;a.REFLOW soldering:set and test the temperature of the different area of REFLOWequipment in advance;b.T o set the peak temperature according to different SMDs,but the actual peak temperature should beless than260℃,processing time should be less than10sec,only1time is allowed;4．SMDs should be soldered at the coordinated position on the PCB;5．Note of Electrical matter:①One-way conduction,LED does not allow the reverse driving;②LED is a kind of constant current component which can not be lighted by the constant voltagemode;a smaller voltage fluctuation can cause the large current fluctuation which causes the failure ofLED;Each LED should be drove under constant current mode if in a parallel circuit design,otherwise,the colour and brightness will be nonuniform;When the environmental temperature rising,theLED junction temperature will rise,internal resistance will decrease,so the current will beincreased bythe constant voltage power which short the life span;③If the brightness of lighting source can meet the requirement,we recommend using thedriving current less than the rated current,in order to improve the product’s reliability;6．LED is a kind of electrostatic sensitive devises,anti-static measures have to be processed during storage and operation:①LED production workshop should lay anti-static floor and ground connection,the work tablehave to use the anti-static materials and cover a table mater with the surface resistance of106-109Ω②Production machine:REFLOW,SMT equipment,electric iron,test equipment;all theequipments must be well grounded,and the grounding alternating current impedance should beless than1.0Ω.A fan need to be installed on the equipments and production processes that easy to generatestatic electricity;the operators must wear anti-static clothing,shoes,wristband,and gloves,etc.in the process;③LEDs must be contained in the anti-static box,and all the package material should be theanti-static materials;7．The details electronic characters can refer to our product specification.SHEN ZHEN XIN GUANG SHUO TECHNOLOGY CO.,LTDPrepared date ：Jul.2013 Rev.：1Page 9of 10◆Notes:1、Above specification may be changed without notice.We will reserve authority on material change for above specification.2、When using this product,please observe the absolute maximum ratings and the instructions for the specification sheets.We assume no responsibility for any damage resulting from use of the product which does not comply with the instructions included in the specification sheets.。
分立元件库元件名称及中英对照
部分分立元件库元件名称及中英对照AND ------------------------------------与门ANTENNA --------------------------------天线BA TTERY --------------------------------直流电源BELL -----------------------------------铃,钟BVC ------------------------------------同轴电缆接插件BRIDEG 1 -------------------------------整流桥(二极管) BRIDEG 2 -------------------------------整流桥(集成块) BUFFER--------------------------------- 缓冲器BUZZER----------------------------------蜂鸣器CAP ------------------------------------电容CAPACITOR ------------------------------电容CAPACITOR POL --------------------------有极性电容CAPV AR ---------------------------------可调电容CIRCUIT BREAKER ------------------------熔断丝COAX -----------------------------------同轴电缆CON ------------------------------------插口CRYSTAL --------------------------------晶体整荡器DB --------------------------------------并行插口DIODE ---------------------------------二极管DIODE SCHOTTKY ------------------------稳压二极管DIODE V ARACTOR ------------------------变容二极管DPY_3-SEG---------------------------- 3段LEDDPY_7-SEG---------------------------- 7段LEDDPY_7-SEG_DP -------------------------7段LED(带小数点) ELECTRO ------------------------------电解电容FUSE ----------------------------------熔断器INDUCTOR -----------------------------电感INDUCTOR IRON -------------------------带铁芯电感INDUCTOR3 -----------------------------可调电感JFET N -------------------------------N沟道场效应管JFET P --------------------------------P沟道场效应管LAMP ----------------------------------灯泡LAMP NEDN -----------------------------起辉器LED -----------------------------------发光二极管METER ---------------------------------仪表MICROPHONE ----------------------------麦克风MOSFET --------------------------------MOS管MOTOR AC -----------------------------交流电机MOTOR SERVO --------------------------伺服电机NAND ----------------------------------与非门NOR ----------------------------------或非门NOT -----------------------------------非门NPN -----------------------------------NPN----三极管NPN-PHOTO ------------------------------感光三极管OPAMP ----------------------------------运放OR ------------------------------------或门PHOTO ---------------------------------感光二极管PNP -----------------------------------三极管NPN DAR ----------------------------NPN三极管PNP DAR ----------------------------PNP三极管POT ----------------------------滑线变阻器PELAY-DPDT---------------------------- 双刀双掷继电器RES1.2 ----------------------------电阻RES3.4 ----------------------------可变电阻RESISTOR BRIDGE ? ----------------------------桥式电阻RESPACK ? ----------------------------电阻SCR ----------------------------晶闸管PLUG ?---------------------------- 插头PLUG AC FEMALE---------------------------- 三相交流插头SOCKET ? ----------------------------插座SOURCE CURRENT---------------------------- 电流源SOURCE VOLTAGE ----------------------------电压源SPEAKER ----------------------------扬声器SW ? ----------------------------开关SW-DPDY ?---------------------------- 双刀双掷开关SW-SPST ? ----------------------------单刀单掷开关SW-PB ----------------------------按钮THERMISTOR ----------------------------电热调节器TRANS1 ----------------------------变压器TRANS2 ----------------------------可调变压器TRIAC ?---------------------------- 三端双向可控硅TRIODE ? ----------------------------三极真空管V ARISTOR ----------------------------变阻器ZENER ? ----------------------------齐纳二极管DPY_7-SEG_D---------------------------- 数码管SW-PB ---------------------------- 开关7805----------------------------------LM7805CT。
KGF1608资料
GENERAL DESCRIPTIONThe KGF1608, housed in a SMD type ceramic package, is a discrete GaAs power FET that features high efficiency and high output power. The KGF1608 specifications are guaranteed to a fixed matching circuit for 3.4 V and 850 MHz; external impedance-matching circuits are also required. Because of its high efficiency (70% min.) , high output power (more than 33 dBm), the KGF1608 is ideal as a transmitter-final-stage amplifier for personal handy phones, such as 3-V digital cellular phones.FEATURES•High output power: 33 dBm (min.)•High efficiency: 70% (min.)•Specifications guaranteed to a fixed matching circuit for 3.4 V and 850 MHz•Low thermal resistance: 18°C/W (typ.)•Package: 3PFPKGF1608¡ electronic components CIRCUITMARKINGKGF1608¡ electronic components ABSOLUTE MAXIMUM RATINGSELECTRICAL CHARACTERISTICS*1Condition: f = 850 MHz, V DS = 3.4 V, I DSQ = 400 mA,ItemV DS Symbol Condition Max.Unit Drain-source voltage Gate-source voltage Total power dissipation Channel temperature V GS P tot T ch Ta = 25°C —80.45150V V W °C Storage temperatureT stg—125°CMin.—–5——–45Ta = Tc = 25°CTa = 25°C Drain current I DS Ta = 25°C 5.5A —ItemP O Symbol Condition Max.Unit Output power —dBm —Min.3370(*1) P IN = 26 dBm Typ.——Drain efficiency h D (*1) P IN = 26 dBm %(Ta = 25°C)Thermal resistanceR th°C/W——18Channel to caseV GS(off)Gate-source cut-off voltage –2.0V –3.0V DS = 3 V, I DS = 11.2 mA —I DSS Drain current—A 4.5V DS = 1.5 V, V GS = 0 V —I DS(off)Drain-source cut-off current 3mA —V DS = 8 V, V GS = –5 V —I GDO Gate-drain leakage current 3mA —V GD = –13 V —I GSS Gate-source leakage current 100m A —V GS = –5 V —¡ electronic componentsKGF1608 RF CHARACTERISTICS¡ electronic componentsKGF1608KGF1608¡ electronic componentsTypical S ParametersFreq(MHz)500.0MAG(S11)ANG(S11)MAG(S21)ANG(S21)MAG(S12)ANG(S12)MAG(S22)ANG(S22)V DS = 3.4 V, I DS = 560 mA600.0 700.0 800.0 900.0 1000.0 1100.0 1200.0 1300.0 1400.0 1500.0 1600.0 1700.0 1800.0 1900.0 2000.0 2100.0 2200.0 2300.0 2400.0 2500.0 2600.0 2700.0 2800.0 2900.0 3000.00.9580.9590.9580.9550.9570.9540.9530.9540.9510.9530.9490.9490.9450.9470.9440.9440.9430.9420.9410.9390.9390.9370.9350.9350.9340.932–168.53–171.29–173.31–175.06–176.39–177.67–178.63–179.67179.56178.68177.76177.04176.52175.74174.85174.49173.49173.09172.34171.67171.15170.39169.68169.08168.44167.711.7621.4701.2571.1090.9860.8870.8130.7450.6950.6420.6060.5690.5390.5140.4900.4690.4500.4330.4170.4050.3890.3810.3670.3620.3490.34587.9585.3782.8578.6676.3474.7472.5471.1169.3367.2965.9963.7763.0359.6958.2856.5155.2754.2152.0551.6449.2548.8746.9145.700.0160.0170.0180.0190.0190.0200.0210.0220.0230.0240.0250.0270.0280.0280.0300.0310.0320.0330.0350.0350.0370.0370.0390.0400.0420.04328.8430.7833.1334.6636.5837.5139.6540.1341.9642.0443.1143.6144.6344.2945.1045.2145.6445.4945.6445.6445.6945.5745.5345.2745.0844.960.8980.8990.8980.9040.8980.9000.9000.8980.8930.8990.8910.9000.8890.9010.8870.8990.8870.8940.8930.8890.8890.8840.8870.8810.8840.879178.40177.62177.29176.14175.81174.70174.77173.68173.28172.53171.81171.47170.58170.35169.32168.90168.11167.59166.58166.01164.90164.75163.54163.26161.99161.4561.0980.56KGF1608¡ electronic componentsTypical S ParametersKGF1608¡ electronic components PACKAGE DIMENSIONS(Unit: mm)METALIZATIONPackage material Pin treatment plate thicknessLead frame material Al 203Ni/Au plating Au:1.0 m m or moreFe-Ni-Co alloy。
锰盐营养琼脂产品说明书
化学品安全技术说明书第一部分化学品及企业标识产品中文名称：锰盐营养琼脂产品英文名称：Manganese Nutrient Agar产品编号：027120企业名称：广东环凯微生物科技有限公司地址：广东省广州市黄埔区广州开发区科学城神舟路788号邮编：510663公司网址电子邮件地址：*********************传真号码：************销售热线：************-8602技术热线：************-8877/8876推荐用途和限制用途：生化研究/分析第二部分危险性概述GSH危害性类别非危险物质或混合物GSH标签要素非危险物质或混合物其它危害（健康危害、环境危害）未见报道第三部分成分/组成信息混合物化学品成分：参考培养基使用说明。
有害物质成分：无第四部分急救措施一般信息：无特殊的措施要求。
皮肤接触：立即用清水彻底清洗。
眼睛接触：立即提起眼睑，用大量流动清水冲洗15min。
如不适就医。
吸入：如果吸入，将人员移动到新鲜空气处，如果没有呼吸，进行人工呼吸操作，并联系医生。
食入：如误食，用水冲洗口腔，如不适就医。
就医信息：出示产品使用说明或者此SDS。
第六部分 泄露应急处理个人防护：穿个人实验服,佩戴手套和口罩,避免吸入干粉。
环境保护措施：用湿布和地拖擦拭干净。
清洁/收集措施：保持干燥。
迅速清洗弄脏的区域。
第七部分 操作处置与储存安全操作注意事项：防止粉尘扬起，应提供通风设备。
储存注意事项：贮存于避光、干燥处，用后立即旋紧瓶盖。
第八部分 接触控制/个人防护职业接触限值没有已知的国家规定的暴露极限。
工程控制：提供安全淋浴和洗眼设备个人保护措施呼吸系统防护：在通风橱里称取产品，佩戴口罩。
眼睛防护：佩戴安全眼镜。
身体防护：穿实验室服。
手防护：戴防化学品手套。
其他防护：常规的工业卫生操作，工作后及时清洗双手。
第九部分 理化特性外观：粉末 pH 值： 7.3±0.2 颜色：淡黄色 气味： 特征性 熔点：无数据资料 沸点： 无数据资料 燃点：无数据资料 闪点： 无数据资料 爆炸限度下限：无数据资料 上限： 无数据资料 热分解：无数据资料 溶解性： 按产品使用说明上的用量比例加蒸馏水，加热煮沸至完全溶解，溶液呈淡黄色澄清无沉淀。
Keysight 16089A, B, C, D 金值 全尺寸接线片操作和维护手册说明书
16089C16089A16089B16089C16089A 16089B16089DKeysight 16089A, B, C, D Kelvin/Alligator Clip LeadsOperation andService ManualNotices© Keysight Technologies 1991-2015 No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Keysight Technologies as governed by United States and international copyright laws.Manual Printing HistoryThe manual’s printing date and part number indicate its current edition. The printing date changes when a new edition is printed (minor corrections and updates that are incorporated at reprint do not cause the date to change). The manual part number changes when extensive technical changes are incorporated. November 1991 Edition 1 January 2000 Edition 2April 2001 Edition 3November 2002 Edition 4July 2010 Edition 5 (part number: 16089-90020)May 2015 Edition 6 (part number: 16089-90030)Manual Part Number16089-90030EditionEdition 6, May 2015Printed in MalaysiaPublished byKeysight TechnologiesInternational Japan G.K,1-3-3 Higashikawasaki-choChuo-kuKobe-shi, Hyogo, JapanWarrantyTHE MATERIAL CONTAINED IN THISDOCUMENT IS PROVIDED “AS IS,”AND IS SUBJECT TO BEINGCHANGED, WITHOUT NOTICE, INFUTURE EDITIONS. FURTHER, TO THEMAXIMUM EXTENT PERMITTED BYAPPLICABLE LAW, KEYSIGHTDISCLAIMS ALL WARRANTIES,EITHER EXPRESS OR IMPLIED WITHREGARD TO THIS MANUAL AND ANYINFORMATION CONTAINED HEREIN,INCLUDING BUT NOT LIMITED TO THEIMPLIED WARRANTIES OFMERCHANTABILITY AND FITNESSFOR A PARTICULAR PURPOSE.KEYSIGHT SHALL NOT BE LIABLE FORERRORS OR FOR INCIDENTAL ORCONSEQUENTIAL DAMAGES INCONNECTION WITH THEFURNISHING, USE, ORPERFORMANCE OF THIS DOCUMENTOR ANY INFORMATION CONTAINEDHEREIN. SHOULD KEYSIGHT AND THEUSER HAVE A SEPARATE WRITTENAGREEMENT WITH WARRANTYTERMS COVERING THE MATERIAL INTHIS DOCUMENT THAT CONFLICTWITH THESE TERMS, THE WARRANTYTERMS IN THE SEPARATEAGREEMENT WILL CONTROL.Technology LicensesThe hardware and/or softwaredescribed in this document arefurnished under a license and may beused or copied only in accordancewith the terms of such license.Restricted Rights LegendIf software is for use in theperformance of a U.S. Governmentprime contract or subcontract,Software is delivered and licensed as“Commercial computer software” asdefined in DFAR 252.227-7014 (June1995), or as a “commercial item” asdefined in FAR 2.101(a) or as“Restricted computer software” asdefined in FAR 52.227-19 (June 1987)or any equivalent agency regulation orcontract clause. Use, duplication ordisclosure of Software is subject toKeysight Technologies’ standardcommercial license terms, andnon-DOD Departments and Agenciesof the U.S. Government will receive nogreater than Restricted Rights asdefined in FAR 52.227-19(c)(1-2)(June 1987). U.S. Government userswill receive no greater than LimitedRights as defined in FAR 52.227-14(June 1987) or DFAR 252.227-7015(b)(2) (November 1995), as applicablein any technical data.Safety NoticesCAUTIONA CAUTION notice denotes a hazard. Itcalls attention to an operatingprocedure, practice, or the like that, ifnot correctly performed or adhered to,could result in damage to the productor loss of important data. Do notproceed beyond a CAUTION noticeuntil the indicated conditions are fullyunderstood and met.WARNINGA WARNING notice denotes a hazard.It calls attention to an operatingprocedure, practice, or the like that, ifnot correctly performed or adhered to,could result in personal injury ordeath. Do not proceed beyond aWARNING notice until the indicatedconditions are fully understood andmet.Safety SummaryThe following general safety precautions must be observed during all phases ofoperation, service, and repair of this instrument. Failure to comply with theseprecautions or with specific WARNINGS given elsewhere in this manual mayimpair the protection provided by the equipment. Such noncompliance wouldalso violate safety standards of design, manufacture, and intended use of theinstrument. Keysight Technologies assumes no liability for the customer’sfailure to comply with these precautions.• DO NOT Operate In An Explosive AtmosphereDo not operate the instrument in the presence of inflammable gasses or fumes.Operation of any electrical instrument in such an environment constitutes asafety hazard.• Keep Away from Live CircuitsOperating personnel must not remove instrument covers. Componentreplacement and internal adjustments must be made by qualified maintenancepersonnel. Do not replace components with the power cable connected. Undercertain conditions, dangerous voltage levels may remain even after the powercable has been disconnected. To avoid injuries, always disconnect the powerand discharge circuits before touching them.• DO NOT Service or Adjust the Instrument AloneDo not attempt internal service or adjustment unless another person, capableof rendering first aid and resuscitation, is present.• DO NOT Substitute Parts or Modify the Instrument.To avoid the danger of introducing additional hazards, do not install substituteparts or perform unauthorized modifications to the instrument. Return theinstrument to a Keysight Technologies Sales and Service Office for service andrepair to ensure that safety features are maintained in operational condition.• Dangerous Procedure Warnings.Warning, such as the example below, precede potentially dangerousprocedures throughput this manual. Instructions contained in the warningsmust be followed.WARNING Dangerous voltages level, capable of causing death, are present in this instrument. Use extreme caution when handling, testing, and adjusting this instrument.CertificationKeysight Technologies certifies that this product met its publishedspecifications at the time of shipment from the factory. Keysight Technologiesfurther certifies that its calibration measurements are traceable to the UnitedStates National Institute of Standards and Technology, to the extent allowed bythe Institution’s calibration facility, or to the calibration facilities of otherInternational Standards Organization members.WarrantyThis Keysight Technologies instrument product is warranted against defects inmaterial and workmanship for a period of one year from the date of shipment,except that in the case of certain components listed in InstrumentSpecifications of this manual, the warranty shall be for the specified period.During the warranty period, Keysight Technologies will, at its option, eitherrepair or replace products which prove to be defective.For warranty service or repair, this product must be returned to a service facilitydesignated by Keysight Technologies. The Buyer shall prepay shipping chargesto Keysight Technologies and Keysight Technologies shall pay shippingcharges to return the product to the Buyer. However, the Buyer shall pay allshipping charges, duties, and taxes for products returned to KeysightTechnologies from another country.Keysight Technologies warrants that its software and firmware designated byKeysight Technologies for use with an instrument will execute its programminginstruction when property installed on that instrument. Keysight Technologiesdoes not warrant that the operation of the instrument, or software, or firmwarewill be uninterrupted or error free.Limitation of WarrantyThe foregoing warranty shall not apply to defects resulting from improper orinadequate maintenance by the Buyer, Buyer- supplied software or interfacing,unauthorized modification or misuse, operation outside of the environmentalspecifications for the product, or improper site preparation or maintenance.No other warranty is expressed or implied. Keysight Technologies specificallydisclaims the implied warranties of merchantability and fitness for a particularpurpose.Exclusive RemediesThe remedies provided herein are Buyer’s sole and exclusive remedies. KeysightTechnologies shall not be liable for any direct, indirect, special, incidental, orconsequential damages, whether based on contract, tort, or any other legaltheory.AssistanceProduct maintenance agreements and other customer assistance agreementsare available for Keysight Technologies products.For any assistance, contact your nearest Keysight Technologies Sales andService Office.Safety SymbolsGeneral definitions of safety symbols used on the instrument or in manuals.Instruction Manual symbol: the product is marked with this symbolwhen it is necessary for the user to refer to the instrument manual inorder to protect against damage to the instrument.Alternating current.Direct current.On (Supply).Off (Supply).In-position of push-button switch.Out-position of push-button switch.A chassis terminal: a connection to the instrument’s chassis, whichincludes all exposed metal structure.Standby.Contents 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .General InformationIntroduction 9Using the 16089A, B, C, D 9Product Description 10Accessories Supplied 10Operating and Safety Precautions 11Operating 11Service 11Specifications 12Common Specifications for the 16089A, B, C, D 12Specifications for the 16089A, B, C 12Specifications for the 16089D 12Supplemental Performance Characteristics 13Supplemental Performance Characteristics of 16089A 13Supplemental Performance Characteristics of 16089B 13Supplemental Performance Characteristics of 16089C 13Supplemental Performance Characteristics of 16089D 132 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparation for UseIntroduction 15Initial Inspection 15Ambient Environmental Considerations 20Operating and Storage 20Connecting the Test Leads for Use 20Packaging the Test Leads 203 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OperationIntroduction 21Test Leads Features 2116089A, B, C 2116089D 22OPEN and SHORT Compensation 23ContentsOperation 244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ServiceIntroduction 25Replaceable Parts 2516089A Replaceable Parts 2616089B Replaceable Parts 2616089C Replaceable Parts 2716089D Replaceable Parts 28Introduction16089A, B, C, D Operation and Service Manual1General InformationIntroductionThe purpose of this manual is to enable you to use your Keysight 16089A, B, C,Kelvin Clip Leads and Keysight 16089D Alligator Clip Leads efficiently andconfidently. This manual contains both general and specific information. Touse the 16089A, B, C, D to perform a specific function (without having to readthe entire manual), follow the directions in "Using the 16089A, B, C, D". Using the 16089A, B, C, DThe 16089A, B, C, D has been designed to operate specifically with the LCRMeter.•To install the 16089A, B, C, D, turn to Chapter 2.•To operate the 16089A, B, C, D, turn to Chapter 3.•To order replaceable parts for the 16089A, B, C, D, turn to "ReplaceableParts" in Chapter 4.Product DescriptionProduct DescriptionThe 16089A, B, C, D has been designed to operate specifically with thefollowing four-terminal-pair type LCR meters and impedance analyzers.The 16089A, B, C, D make it possible to measure odd-shaped components thatcannot be measured with conventional test fixtures. The 16089A, 16089B, and16089C consist of a direct attachment, four-terminal-pair type test leads thatare equipped with two insulated Kelvin clips. Three sizes of Kelvin clips areprovided. The 16089A Kelvin Clip Leads is equipped with two large Kelvin clips,the 16089B Kelvin Clip Leads is equipped with middle size clips and the16089C Kelvin Clip Leads is equipped with small size clips. The 16089D consistof a direct attachment, four-terminal-pair type test leads that are equippedwith four alligator clips.Accessories SuppliedThe following accessories are supplied with the 16089A, B, C, D:Table 1-1 Furnished AccessoriesDescription Part Number QuantityOperation and Service Manual This manual1Operating and Safety PrecautionsOperating and Safety PrecautionsOperatingYou need to observe only normal precautions in handling and operating the16089A, B, C, D. Do not exceed the operating input power, voltage, andcurrent level and signal type appropriate for the instrument being used, refer toyour instrument's operation manual.CAUTION Electrostatic discharge (ESD) can damage the highly sensitive microcircuits in yourinstrument. ESD damage is most likely to occur as the test leads are being connected ordisconnected. Protect them from ESD damage by wearing a grounding strap that providesa high resistance path to ground. Alternatively, ground yourself to discharge any staticcharge built-up by touching the outer shell of any grounded instrument chassis beforetouching the test port connectors.Never touch the test clip contacts.Use a work station equipped with an anti-static work surface.ServiceThe voltage levels found in these test leads when used with the intendedinstruments do not warrant more than normal safety precautions for operatorsafety. Nevertheless, service should be performed only by qualified personnel.SpecificationsSpecificationsThis section lists the complete 16089A, B, C, D specifications. Thesespecifications are the performance standards and limits against which the 16089A, B, C, D is tested. When shipped from the factory, the 16089A, B, C, D meets the following specifications:Common Specifications for the 16089A, B, C, DSpecifications for the 16089A, B, CSpecifications for the 16089DMaximum dc Bias Voltage ±42V peak max Frequency Range 5 Hz to 100 kHz Operating Temperature 0 to 55°COperating Humidity ≤95% RH (@40°C) Non-operating Temperature – 40 to 70°C Non-operating Humidity ≤95% RH (@40°C)Weight300 gCable length0.94mCable length1.3mSupplemental Performance CharacteristicsThis section gives supplemental performance characteristics. Supplemental performance characteristics are not specifications, but are typical characteristics included as additional information for the operator. Supplemental performance characteristics are not guaranteed.Supplemental Performance Characteristics of 16089ASupplemental Performance Characteristics of 16089BSupplemental Performance Characteristics of 16089CSupplemental Performance Characteristics of 16089DApplicable DUT sizeDiameter of DUT’s terminals≤15mmApplicable DUT sizeDiameter of DUT’s terminals ≤7.9mm Length of DUT’s terminals≥3mmApplicable DUT sizeDiameter of DUT’s terminals ≤1mm Space between DUT’s terminals ≥2mm Length of DUT’s terminals≥2mmApplicable DUT sizeDiameter of DUT’s terminals≤5mmIntroduction16089A, B, C, D Operation and Service Manual2Preparation for UseIntroductionThis chapter explains how to install the Keysight 16089A, B, C Kelvin ClipLeads and Keysight 16089D Alligator Clip Leads. The topics covered includeinitial inspection, ambient environmental considerations, connecting the testleads for use, and repackaging the test leads for shipment.Initial InspectionThese test leads have been carefully inspected electrically and mechanicallybefore being shipped from the factory. They should be in perfect physicalcondition, no scratches, dents or the like. They should also be in perfectelectrical condition. Verify this by carefully performing an incoming inspectionto check the test lead set for signs of physical damage and missing contents.Ifany discrepancy is found, notify the carrier and Keysight Technologies. YourKeysight Technologies sales office will arrange for repair and replacementwithout waiting for the claim to be settled•Inspect the shipping container for damage. Keep the shipping materialsuntil the inspection is completed.•Verify that the shipping container contains everything shown in Figure 2-1, Figure 2-2, Figure 2-3, and Figure 2-4 and listed in Table 2-1, Table 2-2,Table 2-3, and Table 2-4•Inspect the exterior of the 16089A, B, C, D for any signs of damage.16089AFigure 2-116089A Product Overview1 Keysight internal-only part number.2 Operation and Service Manual is not shown in Figure 2-1.Table 2-1 Contents of 16089A Description Keysight Part Number QuantityKelvin Clip Leads16089-6000111Operation and Service Manual 216089-900301.16089BFigure 2-216089B Product Overview1 Keysight internal-only part number.2 Operation and Service Manual is not shown in Figure 2-2.Table 2-2 Contents of 16089B Description Keysight Part Number QuantityKelvin Clip Leads16089-6000211Operation and Service Manual 216089-90030116089CFigure 2-316089C Product Overview1 Keysight internal-only part number.2 Operation and Service Manual is not shown in Figure 2-3.Table 2-3 Contents of 16089C Description Keysight Part Number QuantityKelvin Clip Leads16089-6000311Operation and Service Manual 216089-900301Initial Inspection16089DFigure 2-416089D Product Overview1 Keysight internal-only part number.2 Operation and Service Manual is not shown in Figure 2-4.Table 2-4 Contents of 16089D Description Keysight Part Number QuantityKelvin Clip Leads16089-6000411Operation and Service Manual 216089-900301.Ambient Environmental ConsiderationsAmbient Environmental ConsiderationsOperating and StorageThe 16089A, B, C, D must be operated within an ambient temperature range of0°C to 55°C and relative humidity up to 95% at 40°C (non-condensing).The 16089A, B, C, D may be stored within a temperature range of -40°C to+70°C, and at a relative humidity of up to 95% at +40°C (non-condensing). Connecting the Test Leads for UseFigure 2-5 Connecting the Test LeadsPackaging the Test LeadsIf shipment to a Keysight Technologies service center is required, each testlead set should be repackaged using the original factory packaging materials.Alternatively, comparable packaging materials may be used. Wrap the testleads in heavy paper and pack in anti-static plastic packing material. Usesufficient shock absorbing material on all sides of the 16089A, B, C, D toprovide a thick, firm cushion and to prevent movement. Seal the shippingcontainer securely and mark it FRAGILE..Introduction16089A, B, C, D Operation and Service Manual3OperationIntroductionThis chapter describes using the test leads and compensation techniques forthese test leads.Test Leads Features16089A, B, CFigure 3-1 16089A, B, C Test Leads Features1.Kelvin Clips. These are connected to the DUT.2.Four-terminal-pair BNC terminals. These terminals are connected to theUNKNOWN terminals of your measurement instrument.Test Leads Features16089DFigure 3-2 16089D Test Leads Features1.Alligator Clips (red). These are connected to the high terminal of the DUT.2.Alligator Clips (black). These are connected to the low terminal of the DUT.3.V markers. These show the H pot and L pot terminals.4.Four-terminal-pair BNC terminals. These terminals are connected to theUNKNOWN terminals of your instrument.OPEN and SHORT CompensationThe 16089A, B, C, D have inherent stray capacitance, residual inductance, andresidual resistance that affect the measurement. To cancel the effects causedby these residuals and thus minimize their effect on measurement accuracy,the measurement instrument's OPEN and SHORT compensation capabilitiesmust be used. The procedures are described in the measurement instrument'soperation manual.Figure 3-3 Making a Short Condition for the 16089B and 16089CWhen you perform SHORT compensation for the 16089A or 16089D, use thefurnished short bar as shown in Figure 3-4.Figure 3-4 Making a Short Condition for the 16089A and 16089DNOTE If the furnished short bar of 16089A or 16089D is corroded, worn or damaged, reverse the position or replace it with a new short bar. To reverse the short bar, remove the 2 screwsthat fixes the short bar and reverse the position.OperationStep-by-step instructions on how to make a measurement with the 16089A, B,C, D are:1.Set the Cable Length setting according to the LCR meter/ ImpedanceAnalyzer operation manuals.2.Connect the test leads of 16089A, B, C, D to the measurement instrument'sUNKNOWN terminals.3.Perform OPEN and SHORT compensation as described in the measurementinstrument's operation manual. Figure 3-3 and Figure 3-4 show how tomake short condition for the SHORT compensation.4.Connect the component to be tested into the test clips.NOTE When 16089D is used, connect the test clips to the DUT correctly as follows:•Connect all test clips to the DUT.•Connect the same color test clips to the same terminal of the DUT.•Connect the H pot and L pot clips (marked “V") closer to the DUT than H cur and L cur clips.Figure 3-5 also shows how to connect a DUT using the alligator clips of the16089D. Figure 3-5 Connecting the DUT to the16089DIntroduction16089A, B, C, D Operation and Service Manual4ServiceIntroductionThis chapter gives replaceable parts information for the 16089A, 16089B,16089C and 16089D.Replaceable PartsTable 4-1,Table 4-2, Table 4-3 and Table 4-4 list the replaceable parts for the16089A, B, C, and D, respectively. Figure 4-1 shows the connection from thecable to the clip assembly of the 16089C. The parts listed can be ordered fromyour nearest Keysight Technologies office. Ordering information should includethe Keysight part number and the quantity required.1 The whole unit. Keysight internal-only part.Red and orange cables are screwed on the one Kelvin clip assembly. Gray and black cables are screwed on the other Kelvin clip assembly. Orange and gray cables are marked “V”.16089B Replaceable Parts1 The whole unit. Keysight internal-only part.On one Kelvin clip, the orange cable is screwed on the “V” marked side, and the red cable is screwed on the non-marked side. On the other Kelvin clip, the gray cable is screwed on the “V” marked side, and the black cable is screwed on the non-marked side.Table 4-116089A Replaceable Parts Keysight Part Number Quantity Description16089-600011Test Leads 116089-040011Cover Top0515-09142Screw Flat Head M3X0.5 L616089-600112Large Clip Assembly 7121-26962Wire Marker “V”16089-012011Short Bar 0515-15502ScrewTable 4-216089B Replaceable Parts Keysight Part Number Quantity Description16089-600021Test Leads 116089-040021Cover Top0515-09142Screw Flat Head M3X0.5 L616005-600102Kelvin Clip Assembly.* Corresponding to designator in Figure 4-1.1 The whole unit. Keysight internal-only part.Connection from the cables to the Kelvin clip is shown in Figure 4-1.Figure 4-1Kelvin Clip ConnectionsTable 4-316089C Replaceable PartsReference Designator*Keysight Part Number Quantity Description16089-600031Test Lead 116089-040031Cover Top0515-09142Screw Flat Head M3X0.5 L6116005-600131Test Clip Assembly Red 16005-600151Test Clip Assembly Black 20890-1809 2 cm Tube Heat Shrinkable Red 0890-18082 cmTube Heat Shrinkable Black1 The whole unit. Keysight internal-only part.Table 4-5 shows the correspondence between the Alligator Clips and the Cables.Table 4-416089D Replaceable Parts Keysight Part Number Quantity Description16089-600041Test Leads 116089-040041Cover Top0515-09142Screw Flat Head M3X0.5 L60340-10852Insulator Alligator Clip Red 0340-10861Insulator Alligator Clip Black 1400-12524Alligator Clip 7121-26962Wire Marker “V”16089-012011Short Bar 0515-15502ScrewTable 4-5Clip and Cable Correspondence Alligator Clip Color Cable Color Marker Red Orange “V”Red Red Black Gray “V”BlackBlackThis information is subject to change without notice.© Keysight Technologies 1991, 2000, 2001, 2002, 2010, 2015Edition 6, May 2015*16089-90030*16089C16089A16089B16089C16089A 16089B16089D。