广州凯亨阀门价格表20120326
减压阀、单向减压阀-减压阀、单向减压阀型号总揽表
液压阀门>>减压阀>>减压阀、单向减压阀型号总揽表产品名称：减压阀、单向减压阀型号总揽表产品型号：产品口径：DN10-32产品压力：25.0MPa产品材质：铸铁、铸钢、不锈钢等产品概括：生产标准：国家标准GB、机械标准JB、化工标准HG、美标API、ANSI、德标DIN、日本JIS、JPI、英标BS生产。
阀体材质：铜、铸铁、铸钢、碳钢、WCB、WC6、WC9、20#、25#、锻钢、A105、F11、F22、不锈钢、304、304L、316、316L、铬钼钢、低温钢、钛合金钢等。
工作压力1.0Mpa-50.0Mpa。
工作温度：-196℃-650℃。
连接方式：内螺纹、外螺纹、法兰、焊接、对焊、承插焊、卡套、卡箍。
驱动方式：手动、气动、液动、电动。
产品详细信息减压阀RG-03减压阀RG-06减压阀RG-10减压阀RT-03减压阀RT-06减压阀RT-10单向减压阀RCG-03单向减压阀RCG-06单向减压阀RCG-10单向减压阀RCT-03单向减压阀RCT-06单向减压阀RCT-10减压阀、单向减压阀R(C)T、R(C)G系列减压阀、单向减压阀特点1、减压阀用来设定低于主回路的液压回路压力，控制口可进行遥控控制。
2、带单向伐的减压阀可使油流反向自由流动。
3、安装尺寸符合ISO 5781标准。
减压阀、单向减压阀型号说明RC G -03 B系列号码安装型式规格压力调整范围MPaR：减压阀RC：单向减压阀G-板式T-管式03：10通径（3/8"）06：25通径（3/4"）10：32通径（11/4"）请参照规格表减压阀、单向减压阀规格表型号最高使用压力MPa 压力调整范围MPa最大流量ℓ/min泄漏量ℓ/min重量Kg板式管式板式管式RG-03 RT-0325 B：0.5-7C：3.5~14H：7-2550 0.84.5 4.3RCG-03 RCT-03 5.4 4.8RG-06 RT-06125 1 6.8 6.9RCG-06 RCT-06 8.1 7.8RG-10 RT-10250 1.2 11.0 12.0RCG-10 RCT-10 13.8 13.8 使用注意事项:1、泄漏量为前后压差20.5MPa时所测得的。
阀门价格表
CCD-63A
16068
CCD-80A
17160
电动超高 CCD-100A 真空插板 CCD-150A
阀 CCD-200A
18720 21458 24976
CCD-250A
30104
CCD-300A
42308
CCD-400A
74880
品名 型号规格 单价（元） 碳钢 不锈钢
GW-J30-T
516
高真空微 调阀
GID-125A
6205
节型） GID-150A 6821
GID-200A 7825
7614 8359 8683 9510 11048
GID-250A 10238 14402
GID-300A 11016 16168
GI-50C 552
C 系列高 GI-65C 637 真空蝶阀 GI-80C 703
GI-100C 834
4763 5346 5670
GID-40 GID-50 GID-63 GID-80 GID-100 GID-125 GID-150 GID-200 GID-250 GID-300 GID-400 GID-50 GID-63 GID-80 电动高真 GID-100 空蝶阀 GID-125 (调节型）GID-150 GID-200 GID-250 GID-300
GUD-32P
5070
GUD-40P
不锈钢电 动真空球
GUD-50P
阀 GUD-63P
GUD-80P
5725 6786 8003 8892
GUD-100P
11076
GUD-125P
18252
GUD-150P
23712
GUD-16P
Parker Hannifin 304系列三路常闭、常开和三路通用直接作用阀门安装、操作与维护说明书
FLUID CONTROL DIVISIONParker Hannifin Corporation95 Edgewood AvenueNew Britain, CT 06051Telephone (860) 827-2300IOM 304Fax (860) 827-2384 (Rev B)INSTALLATION, OPERATING & MAINTENANCE INSTRUCTIONS3-WAY NORMALLY CLOSED, 3-WAY NORMALLY OPENAND 3-WAY UNIVERSALDIRECT ACTING VALVESSERIES 304GENERAL SAFETY INSTRUCTIONS BEFORE INSTALLATIONFAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.Both the conduit coil and leaded one-piece coil contain a green “grounding” wire that must be secured to a proper ground location.DO NOT cut off the green ground wire. Doing so could negate a proper ground path and leave the valve assembly unprotected or “hot”.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application, including consequences of any failure, and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.Carefully read installation, operation and maintenance procedures prior to installing or servicing valve.Do not use valve as a safety shut-off valve when making repairs. Do not install a valve before depressurizing system down to atmospheric pressure.Care must be taken to ensure that the valve materials selected are suitable for the media being handled. Parker assumes no liability for damage caused by improper material selection.Caution: Do not, at any time, make any alteration or modifications to any valve without the express and written approval of Parker’s Fluid Control Division.DESCRIPTIONThese valves are 3-way direct operated valves. The 304 series valve product line are available as Normally Closed (N.C.), Normally Open (N.O.), or universal (U) valves. The direct acting valves operate with zero pressure differential.Valves may be ordered with either NEMA 2, 4, 4X integrated coils for ordinary locations. Additional solenoid coils and enclosures are offered as described in our catalog.FLUID CODESListed below are the common fluid codes. The codes for the approved fluids for use with each valve are printed on the outside of the individual packaging.CODE FLUIDA - Air or nontoxic, nonflammable gasesAC - AcetyleneG - City gas supplied by public utilieisGA - GasolineHO - Petroleum based oils having viscosities up to 400SSU at 38°F02 No1 and No 2 fuel oils with viscosities lessthan 40SSU at 38°COX - OxygenW Water or other aqueous nonflammable liquidsFor the maximum fluid temperatures, as well asvalve ambientlimitations, check the valve part number on the nameplate and refer to the catalog.TORQUE CHARTINSTALLATION INSTRUCTIONS Installation must be done according to all applicable Safety Codes and Standards and by qualified personnel.Inspect valve prior to installation. Damaged valves oractuators must not be installed.Mounting position and pressure limits: Valves can bemounted directly on piping or by using the two #8-32 UNF threaded holes in the bottom of the valve body for the 1/8” NPT valves. Two #10-32 UNF threaded holes for the 1/4” NPT valves. The valves are designed to operate in any position. The valve may be installed in any line regardless of the direction in which the line runs. However, for optimum life and performance, the valve should be mounted vertically upright so as to minimize wear and reduce the possibility of foreign matter accumulating inside the sleeve area. Line pressure, voltage and frequency must conform to nameplate rating. Allow adequate clearance above valve for removal of coil. WARNING: Do not install a valve whose permitted pressure / temperature ratings are inadequate to meet the operating conditions. Piping: Remove protective closures from the ports. Connect line pressure to the inlet port and apparatus piping to the outlet port. Use of Teflon™ tape, threaded coumpounds or sealants is permissible but should be applied sparingly to male pipe threads only. CAUTION : Do not allow foreign particles, Teflon tape, or thread compound to enter valve. Only the wrench flats provided on the body ports should be used in applying the torque. Ports should not be subjected to excessive torque by use of an oversized wrench, wrench extension or by impacting the wrench handle. Do not use the valve to “stretch” or “align” the pipe. Tightening torque should not exceed 100 in-lbs for 1/8” NPT valves and 175 in-lbs [20,0 Nm] for 1/4” NPT valves. Do not use sleeve or enclosure as a lever when applying torque.Media filtration: For protection of the valve, install a suitable strainer or filter in the inlet side as close to the valve as possible. Dirt or foreign material in the media may cause excessive leakage, wear, or in exceptionalcases, malfunction. Clean periodically depending on service conditions. Lubrication: Lubrication is not required although air linelubrication will substantially increase valve life. Electrical connection: Electrical supply must conform to nameplate rating. Connect coil leads or terminals to the electrical circuit using standard electrical practices in compliance with local authorities and the National Electrical Code. Do not power coil until it has been fitted over sleeve and the retaining nut has been installed to prevent possible coil damage from overheating. WARNING : Turn off electrical power before connecting the valve to the power source. If the coil assembly is located in an inconvenient orientation, it may be reoriented to facilitate installation. Loosen coil assembly nut, rotate coil assembly to desired position, then retighten the retaining nut with an input torque per chart. COIL ASSEMBLY Position coil (as described below) on the sleeve, position and tighten retaining nut into the top of the sleeve assembly using a 5/32” or 5mm hex wrench with an input torque per chart. If the coil orientation needs to be repositioned to meet installation wiring needs, simple loosen the retaining nut usi ng a 5/32” or 5mm hex wrench , then rotate the coil to the required position and tighten the retaining nut. NOTE : The one-piece integrated coil assembly contains top and bottom o-ring seals to prevent moisture ingressioninto the sleeve area. The o-ring seals must be installed correctly for proper functionality. PORT MARKING ARRANGEMENTDe-Energized Energized11 33333One-Piece Integrated Coil. The conduit coil meets NEMA 2, 4, 4X classification for ordinary location requirements. Use suitable electrical cabling and conduit materials and components meeting applicable NEMA recommendations.For both the conduit and leaded one-piece coils, slide one o-ring over and down the sleeve assembly until the o-ring rests on the valve body., Slide the coil over the valve sleeve. Place the second o-ring into the recess located on top of the coil. Affix retaining nut to sleeve and tighten per torque chart. Use suitable electrical cabling for wiring connection.WARNING: Both the conduit coil and leaded one-piece coil contain a green “grounding” wire that must be secured to a proper ground location. The grounding wire is welded to the internal coil frame providing the approved ground path for the total valve assembly.DO NOT cut off the green ground wire. Doing so could negate a proper ground path and leave the valve assembly unprotected or “hot”.One-Piece DIN Coil and various cable option terminations:Loosen cable screw and remove plastic housing from DIN coil. Do not remove the gasket from the DIN spades on the coil. Separate the plastic block from the housing with a small screwdriver to expose the elecctrical terminations. Feed the lead wires through the conduit hub and attach them to the appropriate screw terminal. For electrical connection within the terminal box, use field wire that is rated for 90o C or greater. Snap the plastic block back into place inside the metal enclosure. Replace the cover and hand-tighten the cover screws. Place the gasket over the DIN spades on the coil and press the terminal box and coil together. Secure the terminal box to the coil using the mounting screw provided.Slide one o-ring over and down the sleeve assembly until the o-ring rests on the valve body. Slide the DIN coil over the valve sleeve. Place the second o-ring into the recess located on top of the coil. Affix retaining nut to sleeve and tighten per torque chart.Two-Piece Yoke & Spade Coil with 1/4” tabs: With coil inserted inside of U-shaped metal yoke, slide coil over sleeve. Affix retaining nut to sleeve and tighten per torque chart. Connect spade termination connector to spade tabs on coil.Two Piece Yoke & Molded Leaded 2-Wire Coil: With coil inserted inside of U-shaped metal yoke, slide coil over sleeve. Affix retaining nut to sleeve and tighten per torque chart. Use suitable electrical cabling for wiring connection. Two Piece Grommet Housing & Taped 2 Wire Coil: With the taped coil inserted inside the metallic housing, slide coil over sleeve. Affix retaining nut to sleeve and tighten per torque chart. Use suitable electrical cabling for wiring connection.Coil/enclosure temperature:The direct acting valves are supplied with coils designed for continuous duty service. Normal free space must be provided for proper ventilation. When the coil is energized continuously for long periods of time, the coil assembly will become hot. The coil is designed to operate permanently under these conditions. Any excessive heating will be indicated by smoking and/or odor of burning coil insulation.For the maximum valve ambient conditions, as well as the fluid temperatures, check the valve part number on the nameplate and refer to the product catalog to determine the maximum temperatures.MAINTENANCENote: While the valves are design to operate over millions of cycles, depending on service conditions, fluid being used, filtration, and lubrication, it may be required to periodically clean and/or replace worn components to ensure optimum quality performance. See Disassembly Instructions.CAUTION:Do not expose plastic or elastomeric materials to any type of commercial cleaning fluid. Parts should be cleaned with a mild soap and water solution.If a valve is to be removed from a pipeline carrying hazardous media, the parts of the valve in contact with the hazardous media must be properly cleaned and decontaminated before repairs are performed.DISASSEMBLY INSTRUCTIONSWARNING:Depressurize system and turn off electrical power to the valve before attempting repair. The coil must not be energized unless it is installed on the valve. Otherwise, the coil will overheat and burn out.The valve body need not be removed from the line.CAUTION:When removing or replacing the sleeve assembly, it may be necessary to provide proper support to prevent the valve from rotating thereby causing damage to piping.To remove the coil assembly:Using a 5/32” or 5mm hex wrench, unscrew the top retaining nut of the coil assembly. The coil assembly can be lifted off the sleeve tube.To disassemble the pressure vessel:Use the same 5/32” or 5mm hex wrench turning counterclockwise to remove the sleeve tube. The plunger assembly, return spring and o-ring seal may be removed. Replacement Parts: When ordering replacement parts kits, specify valve number and voltage from nameplate. Parts kits are available for each valve. Parts included in each kit are marked with an asterisk (X). See exploded views.PRESSEURE VESSEL REASSEMBLY INSTRUCTIONSTo reassemble the pressure vessel, refer to exploded view drawings. Parts must be replaced in the order shown.Lubricate o-ring with a mineral oil or equivalent and replace the o-ring into the valve body. Install the plunger and spring into the sleeve. Carefully align threads while installing the sleeve into the body.Tighten the sleeve assembly in the body using the 5/32” or 5mm hex wrench turning clockwise with an input torque per torque chart.COIL REASSEMBLY INSTRUCTIONSWith coil assembly repositioned on the sleeve, position the retaining nut into the top of the sleeve assembly and tighten using a 5/32” or 5mm hex wrench with an input torque of of 25-35 in-lbs [2,9 to 4,0 Nm].LABELINGMODULAR LABELINGFor valves sold modularly, a 2-piece label system is used consisting of a base valve identification label and a coil identification overlay label. The base label is affixed to the coil and the overlay label is placed over the base label provide the complete valve identification.VALVE IDENTIFICATIONAll Parker pressure vessels are identified with a valve label. The label indicates the valve part number, maximum operating pressure differential (MOPD), orifice size and date code.FLUID CONTROL DIV NEW BRITAIN, CT USADATE CODE ORIFICE 1207O 7/64 PRESSURE VESSEL30CC02MV4WATTS 10AC 8.5DCAC 50 PSIDC 50 PSICOIL IDENTIFICATIONAll Parker coil enclosures are identified with a label. The label indicates the coil part number, voltage and frequency.FLUID CONTROL DIV NEW BRITAIN, CT USAVOLTS/HZ24VDCENCL & B4BCOILFULLY ASSEMBLED VALVE LABELINGAll Parker valves are identified with a valve label. The label indicates the valve type and size, maximumoperating pressure differential (MOPD), orifice size and applicable agency approval designations. In addition, the label also specifies the appropriate electrical specifications for agency compliance.FLUID CONTROL DIV NEW BRITAIN, CT USAVALVE NUMBER30CC02MV4B2BVOLTS/HZ 24VDCWATTS 8.5 ORIFICE 7/64 3/32PSI50BAR3CODE0907OPARTS LIST AND COMPONENT DRAWINGRetaining NutComplete Portfolio of Available CoilsDECLARATIONParker’s Fluid Control Division certifies its valve appliance products complies wit h the essential requirements of the applicable European Community Directives. We hereby confirm that the appliance has been manufactured in compliance with the applicable standards and is intended for installation in a machine or application where commissioning is prohibited until evidence has been provided that the machine or application is also in compliance with EC directives.The data supplied in the Parker valve catalogs and general Installation, Operating & Maintenance Instructions are to be consulted and pertinent accident prevention regulations followed during product installation and use. Any unauthorized work performed on the product by the purchaser or by third parties can impair its function and relieves Parker Hannifin of all warranty claims and liability for any misuse and resulting damage.A separate Declaration of Conformity or Manufacturer’s declaration is available upon request. Please provide valve identifica tion numbers and order serial numbers of products concerned.。
HORA气动调节阀样本
阀芯 根据实际工况HORA为用户提供最专业的阀芯。 在大关断压力工况下HORA对阀芯进行平衡阀室 设计，使阀门工作更稳定，寿命更长
密封类型 根据不同介质及温度选择密封材料
3
类型
阀体材质
黄铜 Rg-5 CC491K
铸铁 GG25 EN-JL1040 球铁 GGG-40.3 EN-JS1024 铸钢 GS-C25N 1.0619+N
产品优点 ● 多种阀门型号辅以不同类型的辅件，针对不同工况
可以为用户提供最佳的解决方案 ● 阀门口径DN15-DN800，可为用户提供完整的调节
阀产品系列 ● 同一规格的阀门均提供4种以上的KVs值供用户选
择，提高现场工况的适应性和灵活性 ● 阀门长行程设计，以实现更佳的调节精度 ● 执行机构气开，气关操作方式可灵活选择 ● 执行机构弹簧与膜片有效寿命200百万次，同时没
历经40多年的发展，来自德国北威州Schloß Holte-Stukenbrock的家族企业—HORA公司与世界上著名 的电站设备制造商，能源供应商以及测量-，自动化控制企业建立了良好的伙伴关系。在全世界阀门市 场中HORA品牌以创新，可靠，及卓越的性能得到了广泛的认可。
2008年HORA是德国4家最佳制造商 大 奖M X - A w a r d ( M a n u f a c t u r i n g Excellence Awar)获得者之一
压缩空气
HORA 气动 调节阀
压力调节并联设计
压缩空气
压缩空气
HORA 气动 调节阀
HORA 气动 调节阀
压力调节串联设计
压缩空气
HORA 气动 调节阀
9
压缩空气
阀门价格表大全
厂家直销-铸钢阀门最低价格表
Z41H 铸钢闸阀
铸钢 球阀
H41H 铸钢止回阀
中型 中型 重型 重型 铸钢 中型 中型 重型 重型 铸钢 铸钢 16C 25C 美标 铸钢 铸钢 16C 25C
150LB
16C 25C
150LB 16C 25C
25C
80 80 115 115 75
92 92 125 125 80
350 365 375 400 495 530 705 940 1060 1470 1880 3400 4470 5765
275 275 275 300 320 345 380 515 630 805 1035 1500 2070 2900 4000
铸钢重型
435 445 480 575 920 1000 1300 1500 1900 2400 2760 3680 5150 8050 11300
J41H 铸钢截止阀
中型 中型 重型 重型 铸钢 铸钢 16C 25C
16C DN15 75 DN20 85 DN25 98 DN32 130 DN40 160 DN50 170 DN65 230 DN80 255 DN100 350 DN125 570 DN150 765 DN200 1175 DN250 2170 DN300 3000 DN350 5100
硬
80 90 120 150 170 210 260 370 530 850 1050 1500 1700 2200 3000
301
100 110 150 190 240 350 420 680 1000 1500 1800 2700 3500 4600 6200
304
110 120 170 220 280 380 480 750 1150 1700 2100 3200 4000 5000 7200
阀门的种类和图例
阀门的种类和图例阀的种类及图例在现场我们见到最多的就是阀。
汽包液位三冲量控制、锅炉的燃烧控制等，都是通过阀门开度和关度的大小来控制对象，我们通过算法的目的也是要控制阀门开度和关度的大小，从而达到自动控制。
阀门的用途是广泛的，因此它起的作用也是很大的。
例如:在发电厂中阀门能够控制锅炉和汽轮机的运转;在石油、化工生产中，阀门同样也起着控制全部生产设备和工艺流程的正常运转。
尽管如此，阀门同其它产品比较往往被人们忽视。
例如:在安装机器设备时，人们往往把重点放在主要机器设备方面，如:压缩机、高压容器、锅炉等，这些做法都会使整个生产效率降低或停产、或造成种种其它事故发生，所以我们有必要对阀门进行认识和了解。
阀门的分类阀门产品的种类繁多，说法也不完全统一，有的按用途分(如化工、石油、电站等)、有的按介质分(如水蒸汽、空气阀等)、有的按材质分(如铸铁阀、铸钢阀、锻钢阀等)、有的按连接形式分(如内螺纹、法兰阀等)、有的按温度分(如低温阀、高温阀等)。
我国目前大多数习惯是按压力和结构种类来区分。
即:按公称压力分:?1.6MPa为低压阀、压力2.5、4.0、6.4MPa为中压阀、?10MPa为高压阀、超过100MPa为超高压阀。
按结构种类分主要有:旋塞阀、闸阀、截止阀、球阀—用于开启或关闭管道的介质流动。
止回阀(包括底阀)—用于自动防止管道内的介质倒流。
节流阀—用于调节管道介质的流量。
蝶阀—用于开启或关闭管道内的介质。
也可作调节用。
安全阀—用于锅炉、容器设备及管道上，当介质压力趔过规定数值时，能自动排除过剩介质压力，保证生产运行安全。
减压阀—用于自动降低管道及设备内介质压力。
系使介质经过阀瓣的间隙时，产生阻力造成压力损失，达到减压目的。
用于蒸汽管道上自动排除冷凝水，防止蒸汽损失或泄漏。
疏水器—按用途和作用分类截断阀类——主要用于截断或接通介质流。
包括闸阀、截止阀、隔膜阀、球阀、旋塞阀、碟阀、柱塞阀、球塞阀、针型仪表阀等。
阀门价格表(xls 10)
DN80
3546.00
11
S713型铸铁对夹电动尼 龙覆层蝶阀
DN100 DN125
DN150
3714.00 4820.00 4856.00
DN200 6320.00
DN250 8064.00
DN300 8962.00
DN50
2490.00
DN65
2842.00
DN80
2886.00
12
S714型铸铁对夹气动尼 龙覆层蝶阀
DN300 ————
DN50
364.00
DN65
416.00
DN80
460.00
9
S711型铸铁对夹手柄尼 龙覆层蝶阀
DN100 DN125
628.00 877.00
DN150 1014.00
DN200 1520.00
DN250 2248.00
DN300 3184.00
DN50 ————
DN65 ————
DN300
DN50
DN65
DN80
SW44型球墨铸铁法兰 遥控浮球阀
DN100 DN125
DN150
DN200
DN250
DN300
DN50
DN65
DN80
SW661型球墨铸铁法兰 暗杆闸阀
DN100 DN125
DN150
DN200
DN250
DN300
DN50
DN65
DN80
S662型球墨铸铁法兰软 DN100 密封暗杆闸阀
3240.00
DN200 5600.00
DN250 ————
DN300 ————
DN50
220.00
CV值计算公式
CV值計算公式首先依照流體狀態來計算閥門的容量(CV)，然後去選擇適合此CV值的閥門。
選擇適用於下列表格中壓力狀態的計算公式來計算出需求的CV值流體壓力狀態計算公式說明液體ΔP<F²L(P1─PVC)Cv=P1 ：入口壓力k gf / ㎝² AP2 ：入口壓力k gf / ㎝² AΔP：差壓k gf / ㎝²(P1-P2)G ：比重Ώ：液體流速m3 / h：氣體流速m3 / h( at 15℃ , 1013mbar )= Nm3 / h x (288/273)W ：蒸汽流速kg / hT ：閥出口的流體溫度˚ K( =273 + ℃)Tsh：過熱度數FL ：壓力恢復系數Pvc：Vena contracta pressure kgf / ㎝² APv ：流體的飽和氣水壓在逆流的溫度中kgf /㎝²Pc ：液體的臨界壓力kgf / ㎝² AΔP≧F²L(P1─PVC)蒸汽ΔP＜0.5 F²L P1ΔP≧0.5 F²L P1Gas ΔP＜0.5 F²L P1ΔP≧0.5 F²L P1CV值當60℉(15.6℃)的清水以差壓1psi從入口流到出口時，CV值以US gal/min來代表流量。
這是普遍用來代表CV的係數。
德國採用Kv計算法。
當5~30℃的清水以差壓1kgf/cm²從入口流到出口時，Kv值所代表的流量為m3/h。
Kv = Cv / 1.167現在已有國際運動，想把磅度量衡法和單位公制系統換成單位國際制系統(SI)。
Cv值在SI時會換算成Av值。
Av=(24 / 106 ) x CvThe adequate valve traveling should be checked in view of the calculated Cv value and the valve size rating Cv which is thereby selected.閥門可應用在下表的閥門開度範圍ⓐ內。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
广州凯亨阀门有限公司2011年9月25日一、广州凯亨阀门有限公司1-7页二、浙江盾安阀门有限公司8-9页三、宁波埃美柯阀门有限公司10页四、天津莱斯特阀门有限公司11页五、山东泉城阀门有限公司12-14页六、河北远大阀门集团有限公司15-18页七、上海松江（远恒）静宁减震器有限公司19页八、凯亨减震器20页九、木托、U管码、吊码、镀彩码、离墙码21页十、山西玛钢管件22页十一、江西M牌玛钢管件23页十二、山西太谷玛钢有限责任公司24页十三、焊接大小头、弯头、三通25页十四、潍坊创新铸业有限公司（消防卡箍）26-30页十五、济南玫德（迈克）铸造有限公司（消防卡箍）31-38页十六、风咀、防火阀、消声器、静压箱39页此价仅供参考，如有变动恕不另行通知！！！！！！2011年10月1日起执行广州市天河区东圃凯哼五金经营部（原广州市天河区员村广厦器材经营部）广州市天河区东圃凯哼五金经营部 电话：020-******** 85553031 传真：020-******** E-mail:guangxiags@第 1 页 共 39 页广州凯亨阀门有限公司产品名称/型号规格 单位 单价 产品名称/型号 规格 单位 单价 产品名称/型号 规格 单位 单价 产品名称/型号 规格 单位 单价电动二通阀KH220DN15套 372.00 比例积分阀KHT DN50 套 2934.00 蜗轮 蝶阀 中线对夹 KHD371X PN10/16 DN40 个 432.00 法兰式蝶阀KHD341QPN10/16DN40 个 534.00 DN20套 372.00 比例积分阀KHT DN65 套 4487.00 DN50 个 448.00 DN50 个 534.00 DN25 套 406.00 比例积分阀KHT DN80 套 7593.00 DN65 个 484.00 DN65 个 590.00 电动三通阀KH220DN15套 406.00 比例积分阀KHT DN100 套 8974.00 DN80 个 536.00 DN80 个 693.00 DN20套 406.00 比例积分阀KHT DN125 套 11045.00 DN100 个 620.00 DN100 个 777.00 DN25 套 424.00 比例积分阀KHT DN150 套 12425.00 DN125 个 740.00 DN125 个 1030.00 电动二通阀KH230DN15套 355.00 比例积分阀KHT DN200 套 17258.00 DN150 个 856.00DN150 个 1273.00 DN20套 355.00 比例积分阀KHT DN250 套 23470.00 DN200 个 1432.00DN200 个 2003.00 DN25 套 389.00 比例积分阀KHT DN300 套 33825.00 DN250 个 1832.00DN250 个 2808.00 电动三通阀KH230DN15套 372.00 变压器KH-40 个 371.00 DN300 个 2676.00DN300 个 3650.00 DN20套 372.00 压差旁通阀KHV DN25 套 3797.00DN350 个 3116.00 DN350 个 5148.00 DN25 套 424.00 压差旁通阀KHV DN32 套 3969.00DN400 个 6540.00 DN400 个 8330.00 电动二通球阀KH250DN15套 337.00 压差旁通阀KHV DN40 套 4142.00DN450 个 9425.00 DN450 个 10483.00 DN20套 337.00 压差旁通阀KHV DN50 套 4314.00 DN500 个 9920.00 DN500 个 11513.00 DN25 套 389.00 压差旁通阀KHV DN65 套 5868.00 DN600 个 16948.00 DN600 个 20779.00 电动三通球阀KH250DN15套 372.00 压差旁通阀KHV DN80 套 8974.00 DN700 个 26200.00 DN700 个 33509.00 DN20套 372.00 压差旁通阀KHV DN100 套 10355.00 DN800 个 42040.00 DN800 个 43056.00 DN25套 424.00 压差旁通阀KHV DN125 套 12425.00 DN900 个 70288.00静态平衡阀KHSP45FPN16DN25 个 1036.00 机械式温控器KH801B 个 100.00 压差旁通阀KHV DN150 套 13806.00 DN1000 个 97500.00 DN40 个 1084.00 电子式温控器KH6800 个 128.00 压差旁通阀KHV DN200 套 18638.00 DN1200 个 124871.00DN50 个 1224.00 液晶式温控器KH01 个 224.00 压差旁通阀KHV DN250 套 34515.00 电动式 蝶阀 KHD971XPN10/16 DN40/50 个3000.00 DN65 个 1648.00 液晶式温控器KH02 个 242.00 压差旁通阀KHV DN300 套 41418.00 DN65 个 3225.00DN80 个 2212.00 液晶式温控器KH205 个 293.00 遥控器KH80Y-1 个 52.00 DN80 个 3313.00DN100 个 2966.00 液晶式温控器KH206 个 500.00 遥控器KH80Y-2 个 85.00 DN100 个 4030.00DN125 个 4000.00 液晶式温控器KH208 个 467.00 水流开关KH 个 448.00 DN125 个 4562.00DN150 个 4942.00 液晶式温控器KH209 个 309.00 可调式压力开关KH 个 589.00 DN150 个 4689.00 DN200 个 7766.00 液晶式温控器KH6600 个 343.00 压差控KHP74JA 个 689.00 DN200 个 6322.00 DN250 个 13130.00 温度传感器KH8000 个 271.50 手动蝶阀中线对夹KHD71XPN10/16DN40 个 180.00 DN250 个 8510.00 DN300 个 16472.00 比例积分控制器KH880 个 518.00DN50 个 200.00 DN300 个 11935.00 DN350 个 22590.00 驱动器KHT3102 个 1726.00DN65 个 236.00DN350 个 12418.00 DN400 个 34354.00 驱动器KHT3202 个 1898.00DN80 个 288.00 DN400 个 16174.00 丝口平衡阀KHSP15FPN16DN15 个 236.00 驱动器KHT7102 个 3452.00DN100 个 376.00 DN450 个 21063.00DN20 个 284.00 驱动器KHT7202个 6213.00DN125 个 492.00 DN500 个 23212.00DN25 个 330.00 比例积分阀KHT DN25 套 2416.00DN150 个 612.00 DN600 个 39070.00DN32 个 472.00 比例积分阀KHT DN32 套 2589.00 DN200 个 1032.00 DN700 个 57363.00 DN40 个 754.00 比例积分阀KHT DN40套 2761.00 DN250个1568.00 DN800 个 111125.00DN50 个1130.00广州市天河区东圃凯哼五金经营部 电话：020-******** 85553031 传真：020-******** E-mail:guangxiags@第 2 页 共 39 页广州凯亨阀门有限公司产品名称/型号 规格 单位 单价 产品名称/型号规格 单位 单价 产品名称/型号规格 单位单价 产品名称/型号规格 单位 单价丝口铁闸阀 KHZ11T PN10/16 DN15 个 48.00 法兰软密封闸阀（带指示）KHZ45XPN16DN40/50 个609.00 法兰 软密封 闸阀KHZ45X PN16 DN40/50 个 516.00 法兰 明杆 铁闸阀KHZ41T PN10/16 DN40/50 个698.00 DN20 个 57.00 DN65 个 725.00 DN65 个 660.00 DN65 个 842.00 DN25 个 69.00DN80 个 867.00 DN80 个 796.00 DN80 个 1018.00 DN32 个 89.00DN100 个 1014.00 DN100 个 840.00 DN100 个 1246.00 DN40 个 115.00DN125 个 1520.00 DN125 个 1456.00 DN125 个 2015.00 DN50 个 178.00DN150 个 1809.00 DN150 个 1684.00 DN150 个 2478.00 DN65 个 215.00DN200 个 2818.00 DN200 个 2688.00 DN200 个 3931.00 DN80 个 325.00DN250 个 4880.00DN250 个 4780.00 DN250 个 6248.00 DN100 个 412.00DN300 个 6387.00DN300 个 6832.00DN300 个 9280.00 法兰暗杆铁闸阀 KH45T PN10/16 DN40/50 个 750.00 DN350 个 10285.00 DN350 个 10169.00DN350 个 14036.00 DN65 个 864.00 DN400 个 13896.00 DN400 个 13867.00 DN400 个 19003.00 DN80 个 1096.00 DN450 个 16958.00 DN450 个 16576.00 DN450 个 30498.00 DN100 个 1368.00 DN500 个 22404.00DN500 个 22129.00 DN500 个 33141.00 DN125 个 2060.00 法兰明杆 铁闸阀KHZ44T PN10/16 DN40/50 个845.00 铸钢闸阀 KHZ41H-16C DN40 个 1192.00 DN600 个 58987.00 DN150 个 2688.00 DN65 个 1135.00 DN50 个 1548.00 DN800 个 108856.00 DN200 个 4340.00 DN80 个 1245.00 DN65 个 2012.00 铸钢闸阀 KHZ41H-40C DN40 个 1284.00 DN250 个 6916.00 DN100 个 1498.00 DN80 个 2488.00 DN50 个 1652.00 DN300 个 10056.00 DN125 个 2240.00 DN100 个 3076.00 DN65 个 2472.00 DN350 个 14724.00 DN150 个 3025.00 DN125 个 4884.00 DN80 个 4024.00 DN400 个 20500.00 DN200 个 4710.00 DN150 个 6152.00 DN100 个 4532.00 DN450 个 32884.00 DN250 个 7465.00 DN200 个 9056.00 DN125 个 5864.00 DN500 个 41104.00DN300 个 11360.00 DN250 个 13824.00 DN150 个 8152.00 DN600 个 61952.00DN350 个 14980.00 DN300 个 19500.00 DN200 个 12820.00 DN800 个 115188.00DN400 个 22325.00 DN350 个 27652.00 DN250 个 20148.00 法兰软密封（球默）闸阀 KHZ45X PN16 DN40/50 个1046.00 DN450 个 36810.00 DN400 个 35312.00 DN300 个 30224.00 DN65 个 1285.00 DN500 个 64500.00 铸钢闸阀KHZ41H-25C DN40 个 1192.00 DN350 个 43504.00 DN80 个 1513.00 DN600 个 86110.00 DN50 个 1548.00 DN400 个 70976.00 DN100 个 1839.00 DN800 个 101189.00 DN65 个 2012.00 铸钢闸阀KHZ41H-64C DN40 个 1924.00 DN125 个 2689.00 不锈钢丝口闸阀KHZ11W-10P/16PDN15 个 205.00 DN80 个 2488.00 DN50 个 2520.00 DN150 个 3447.00 DN20 个 236.00 DN100 个 3316.00 DN65 个 3524.00 DN200 个 5142.00DN25 个 298.00 DN125 个 5212.00 DN80 个 4352.00 DN250 个 7624.00DN32 个 336.00DN150 个 6612.00 DN100 个 5724.00 DN300 个 11548.00DN40 个 448.00 DN200 个 10096.00DN125 个 8700.00 DN350 个 15272.00DN50 个 758.00 DN250 个 14948.00 DN150 个 12136.00 DN400 个 23984.00 DN65 个 1050.00 DN300 个 21192.00 DN200 个 19920.00 DN450 个 31228.00 DN80 个 1450.00 DN350 个 30332.00 DN250 个 28392.00 DN500 个 45735.00DN100 个 2220.00 DN400 个38824.00DN300 个 48080.00产品名称/型号规格单位单价产品名称/型号规格单位单价产品名称/型号规格单位单价产品名称/型号规格单位单价法兰电动闸阀KHZ945TPN10 DN50 个10150.00不锈钢法兰闸阀KHZ41W-10P/16PDN15 个890.00电动铸钢闸阀KHZ940H-16C/25DN100 个15356.00法兰球阀KHQ41FPN16DN20 个193.00 DN65 个10560.00 DN20 个950.00 DN125 个17300.00 DN25 个214.00 DN80 个10890.00 DN25 个1150.00 DN150 个18700.00 DN32 个281.00 DN100 个11110.00 DN32 个1256.00 DN200 个22952.00 DN40 个369.00 DN125 个11620.00 DN40 个1280.00 DN250 个30100.00 DN50 个460.00 DN150 个12189.00 DN50 个1650.00 DN300 个37140.00 DN65 个628.00 DN200 个15128.00 DN65 个1890.00 DN350 个47096.00 DN80 个839.00 DN300 个20477.00 DN80 个2250.00 DN400 个56136.00 DN100 个1183.00 DN350 个24894.00 DN100 个3890.00 DN450 个69420.00 DN125 个2706.00 DN400 个32073.00 DN125 个4986.00 DN500 个89232.00 DN150 个3071.00 DN450 个43773.00 DN150 个8900.00 DN600 个134820.00丝口球阀KHQ11F-16DN15 个58.00 DN500 个47171.00 DN200 个12560.00法兰铸钢截止阀KHJ41HPN16C/25DN15 个393.00 DN20 个72.00 DN600 个57068.00 DN250 个17800.00 DN20 个463.00 DN25 个91.00 DN700 个88146.00 DN300 个22500.00 DN25 个562.00 DN40 个200.00 DN800 个110225.00法兰截止阀KHJ41T/W/XPN16DN15 个204.00 DN32 个737.00 DN50 个244.00 DN900 个117398.00 DN20 个244.00 DN40 个1021.00对夹消声止回阀KHH71XPN10/16DN40 个140.00 DN1000 个183752.00 DN25 个360.00 DN50 个1179.00 DN50 个140.00 DN1200 个289552 DN32 个380.00 DN65 个1888.00 DN65 个193.00电动铸钢蝶阀KHD943H-16C/25 DN100 个11264 DN40 个440.00 DN80 个2204.00 DN80 个239.00 DN150 个18208 DN50 个560.00 DN100 个3026.00 DN100 个398.00 DN200 个20892.00 DN65 个760.00 DN125 个4784.00 DN125 个439.00 DN250 个24076.00 DN80 个1128.00 DN150 个6399.00 DN150 个527.00 DN300 个31504.00 DN100 个1568.00 DN200 个9154.00 DN200 个1264.00 DN350 个36620.00 DN125 个2436.00 DN250 个18950.00 DN250 个1931.00 DN400 个45556.00 DN150 个3268.00 DN300 个25689.00 DN300 个3510.00 DN500 个66620.00 DN200 个5552.00法兰铸钢球阀KHQ41FPN16C/25DN15 个330.00 DN350 个5689.00 DN600 个81600.00 DN250 个8156.00 DN20 个358.00 DN400 个6890.00 DN700 个DN300 个18508.00 DN25 个390.00法兰消声止回阀KHH42XPN10/16DN40 个267.00 DN800 个115284.00铸钢截止阀KHJ41H-64DN40 个1832.00 DN32 个530.00 DN50 个333.00铸钢截止阀KHJ41H-40 DN40 个1192.00 DN50 个2380.00 DN40 个677.00 DN65 个456.00 DN50 个1464.00 DN65 个3296.00 DN50 个772.00 DN80 个569.00 DN65 个2108.00 DN80 个4352.00 DN65 个1246.00 DN100 个734.00 DN80 个2568.00 DN100 个5724.00 DN80 个1485.00 DN125 个1046.00 DN100 个3480.00 DN125 个9296.00 DN100 个2078.00 DN150 个1436.00 DN125 个5036.00 DN150 个12136.00 DN125 个4001.00 DN200 个2278.00 DN150 个6868.00 DN200 个20148.00 DN150 个5339.00 DN250 个3384.00 DN200 个11904.00 DN200 个9614.00 DN300 个4200.00第 3 页共39 页产品名称/型号规格单位单价产品名称/型号规格单位单价产品名称/型号规格单位单价产品名称/型号规格单位单价蝶型对夹止回阀KHDH77X PN16 DN40 个179.00法兰铸钢旋启式止回阀KHH44HPN16C/25DN40 个860.00法兰升降式止回阀KHH41T/W/XPN16DN15 个95.00静音止回阀KHDRVZPN16DN32 个692.00 DN50 个204.00 DN50 个913.00 DN20 个116.00 DN40 个692.00 DN65 个260.00 DN65 个1393.00 DN25 个144.00 DN50 个796.00 DN80 个337.00 DN80 个1608.00 DN32 个193.00 DN65 个1028.00 DN100 个435.00 DN100 个2415.00 DN40 个256.00 DN80 个1180.00 DN125 个593.00 DN125 个3384.00 DN50 个344.00 DN100 个1412.00 DN150 个698.00 DN150 个4559.00 DN65 个544.00 DN125 个2056.00 DN200 个1032.00 DN200 个6974.00 DN80 个853.00 DN150 个2600.00 DN250 个2020.00 DN250 个11250.00 DN100 个1211.00 DN200 个3856.00 DN300 个2780.00限流止回阀KHLH45-16PN16DN40 个4049.00 DN125 个1874.00 DN250 个6600.00 DN350 个3250.00 DN50 个4050.00 DN150 个2618.00 DN300 个9460.00 DN400 个5689.00 DN65 个4318.00 DN200 个4451.00法兰过滤器KHGL41HPN10/16DN40 个246.00 DN450 个8890.00 DN80 个4858.00 DN250 个5893.00 DN50 个355.00法兰旋启式止回阀KHH44T/W/X PN10/16 DN40 个372.00 DN100 个5939.00丝口铁止回阀KHH11T-10/16DN15 个40.00 DN65 个474.00 DN50 个505.00 DN125 个6480.00 DN20 个48.00 DN80 个660.00 DN65 个604.00 DN150 个8098.00 DN25 个68.00 DN100 个962.00 DN80 个839.00 DN200 个10800.00 DN32 个99.00 DN125 个1636.00 DN100 个1057.00 DN250 个17279.00 DN40 个141.60 DN150 个2022.00 DN125 个1495.00 DN300 个22680.00 DN50 个220.00 DN200 个3292.00 DN150 个2183.00 DN350 个25928.00 DN65 个368.00 DN250 个4567.00 DN200 个3099.00 DN400 个32396.00 DN80 个478.00 DN300 个6764.00 DN250 个5851.00 DN450 个37800.00 DN100 个560.00 DN350 个10586.00 DN300 个8614.00 DN500 个51299.00不锈钢丝口止回阀KHZ11W-10P/16PDN15 个198.00 DN400 个15535.00 DN350 个15967.00不锈钢法兰止回阀KHH44W-10P/16PDN15 个850.00 DN20 个205.00Y型拉杆伸缩过滤器KHYSTF-16DN50 个1120.00 DN400 个16957.00 DN20 个900.00 DN25 个265.00 DN65 个1356.00橡胶瓣止回阀KHH44X PN10/16 DN40 个1050.00 DN25 个1005.00 DN32 个325.00 DN80 个1890.00 DN50 个1105.00 DN32 个1156.00 DN40 个441.00 DN100 个2860.00 DN65 个1323.00 DN40 个1250.00 DN50 个756.00 DN125 个4356.00 DN80 个1798.00 DN50 个1550.00 DN65 个980.00 DN150 个6650.00 DN100 个1970.00 DN65 个1780.00 DN80 个1130.00 DN200 个7800.00 DN125 个2457.00 DN80 个2156.00 DN100 个2250.00 DN250 个11005.00 DN150 个3074.00 DN100 个3790.00丝口截止阀KHJ11T-16DN15 个26.50 DN300 个14300.00 DN200 个5128.00 DN125 个4569.00 DN20 个59.00 DN350 个15600.00 DN250 个7451.00 DN150 个8800.00 DN25 个88.00 DN400 个18900.00 DN300 个11878.00 DN200 个11560.00 DN32 个106.00 DN450 个25600.00 DN350 个25600.00 DN250 个16860.00 DN40 个158.50 DN500 个32500.00 DN400 个45600.00 DN300 个21560.00 DN50 个232.00 DN600 个48900.00第 4 页共39 页产品名称/型号规格单位单价产品名称/型号规格单位单价产品名称/型号规格单位单价产品名称/型号规格单位单价丝口过滤器KHGL41DN15 个36.00自动反冲洗过滤器DN25 个1400.00法兰波纹管补尝器KHZBPN10/16DN32 个342.00动态平衡阀KHZL47FPN16DN32 个2880.00DN20 个42.00 DN32 个1500.00 DN40 个365.00 DN40 个2960.00 DN25 个59.00 DN40 个1560.00 DN50 个410.00 DN50 个3120.00 DN32 个94.00 DN50 个1720.00 DN65 个515.00 DN65 个4000.00 DN40 个130.00 DN65 个1920.00 DN80 个622.00 DN80 个5940.00 DN50 个189.00 DN80 个2200.00 DN100 个686.00 DN100 个7800.00法兰电子除垢仪KH-D PN10 DN50 个3400.00 DN100 个2600.00 DN125 个1071.00 DN125 个9600.00 DN65 个3800.00 DN125 个3300.00 DN150 个1243.00 DN150 个12480.00 DN80 个4400.00 DN150 个3840.00 DN200 个2058.00 DN200 个14840.00 DN100 个6000.00 DN200 个6720.00 DN250 个2829.00 DN250 个25240.00 DN125 个7200.00 DN250 个8400.00 DN300 个3789.00 DN300 个33440.00 DN150 个8400.00 DN300 个12000.00 DN350 个4200.00复合式排气阀KHCARXPN10/16DN50 个3500.00 DN200 个11200.00 DN350 个15200.00 DN400 个5572.00 DN80 个4880.00 DN250 个14400.00 DN400 个19200.00 DN450 个10158.00 DN100 个6660.00 DN300 个16800.00法兰橡胶软接头KHJGD41PN10/16DN40 个158.00 DN500 个22984.00 DN125 个8900.00 DN350 个20400.00 DN50 个200.00丝口软接头KHJGD12PN10/16DN15 个68.00 DN150 个11560.00 DN400 个26400.00 DN65 个263.00 DN20 个72.00 DN200 个17320.00伸缩器KHSSQ DN150 个2150.00 DN80 个298.00 DN25 个120.00手动排泥阀KH744XPN10/16DN50 个1450.00 DN200 个2250.00 DN100 个396.00 DN32 个156.00 DN65 个1780.00 DN300 个3369.00 DN125 个548.00 DN40 个185.00 DN80 个2250.00 DN350 个5986.00 DN150 个681.00 DN50 个225.00 DN100 个3369.00 DN400 个8050.00 DN200 个1004.00 DN65 个340.00 DN125 个8560.00 DN450 个8600.00 DN250 个1537.00法兰不锈钢金属软管DN40 个530.00 DN150 个11580.00 DN500 个11250.00 DN300 个1945.00 DN50 个532.00 DN200 个22592.00 DN600 个12240.00 DN350 个2804.00 DN65 个788.00压差旁通阀KH800XDN50 个6636.00 DN700 个20230.00 DN400 个3577.00 DN80 个998.00 DN65 个6890.00 DN800 个25430.00 DN450 个5574.00 DN100 个1150.00 DN80 个7105.00 DN900 个31760.00液压水位控制阀KH745XPN10/16DN40 个2167.00 DN125 个1480.00 DN100 个8598.00 DN1000 个40050.00 DN50 个2167.00 DN150 个1985.00 DN125 个11250.00 DN1200 个68900.00 DN65 个2528.00 DN200 个3589.00 DN150 个12113.00不锈钢软管带钢丝网20*300 个129.00 DN80 个2852.00 DN250 个4485.00 DN200 个17980.00 20*400 个142.00 DN100 个3578.00 DN300 个5550.00 DN250 个28950.00 20*500 个153.00 DN125 个4574.00 DN350 个7400.00 DN300 个39558.00 25*300 个276.00 DN150 个5140.00 DN400 个10025.00 DN350 个41500.00 32*300 个333.00 DN200 个7938.00微量排气阀KHCRXDN15 个800.00 DN400 个48900.00 40*300 个355.00 DN250 个15600.00 DN20 个950.0050*300 个572.00 DN300 个22560.00 DN25 个1150.00第 5 页共39 页遥控浮球阀KH100XPN16活塞式加30% DN40 个1604.00可调式减压稳压阀KH200XPN16活塞式加30%DN40 个2864.00缓闭式止回阀KH300XPN16活塞式加30%DN40 个1840.00流量控制阀KH400XPN16活塞式加30%DN40 个2134.00 DN50 个1604.00 DN50 个2864.00 DN50 个1840.00 DN50 个3234.00 DN65 个1764.00 DN65 个3037.00 DN65 个2024.00 DN65 个3969.00 DN80 个2171.00 DN80 个3494.00 DN80 个2415.00 DN80 个4397.00 DN100 个2419.00 DN100 个3780.00 DN100 个2709.00 DN100 个5183.00 DN125 个3864.00 DN125 个5158.00 DN125 个4154.00 DN125 个6560.00 DN150 个3973.20 DN150 个7560.00 DN150 个4435.00 DN150 个7518.00 DN200 个7161.00 DN200 个8526.00 DN200 个7648.00 DN200 个12306.00 DN250 个12390.00 DN250 个14129.00 DN250 个13150.00 DN250 个20244.00 DN300 个18165.00 DN300 个20227.00 DN300 个18955.00 DN300 个29156.00 DN350 个32001.00 DN350 个34712.00 DN350 个33250.00 DN350 个45860.00 DN400 个68000.00 DN400 个45512.00 DN400 个48856.00 DN400 个79850.00防爆波阀KHFA49QPN16 DN40 个1142.00流量控制阀KH400XPN16活塞式加30%DN40 个2134.00持压泄压阀KH500XPN16活塞式加30%DN40 个2864.00水力控制阀KH600XPN16活塞式加30%DN40 个2087.00 DN50 个1142.00 DN50 个3234.00 DN50 个2864.00 DN50 个2087.00 DN65 个1558.00 DN65 个3969.00 DN65 个3137.00 DN65 个2255.00 DN80 个1919.00 DN80 个4397.00 DN80 个3784.00 DN80 个2663.00 DN100 个2394.00 DN100 个5183.00 DN100 个4028.00 DN100 个2943.00 DN125 个3003.00 DN125 个6560.00 DN125 个5536.00 DN125 个4444.00 DN150 个3599.00 DN150 个7518.00 DN150 个7820.00 DN150 个4557.00 DN200 个7812.00 DN200 个12306.00 DN200 个8980.00 DN200 个7799.00液压水位控制阀KHH142X PN10/16 DN40 个2398.00 DN250 个20244.00 DN250 个14776.00 DN250 个13150.00 DN50 个2520.00 DN300 个29156.00 DN300 个20937.00 DN300 个19740.00 DN65 个3155.00 DN350 个45860.00 DN350 个45890.00 DN350 个35564.00 DN80 个3315.00 DN400 个79850.00 DN400 个78990.00 DN400 个69850.00 DN100 个3578.00紧急关闭阀KH900XDN50 个5520.00水力电动浮球阀KH106XPN16活塞式加30%DN40 个3276.00减压稳压阀KHY416PN16DN40 个1053.00 DN125 个5578.00 DN65 个6410.00 DN50 个3276.00 DN50 个1053.00 DN150 个6552.00 DN80 个6900.00 DN65 个3465.00 DN65 个1327.00 DN200 个9524.00 DN100 个7500.00 DN80 个3885.00 DN80 个1700.00 DN250 个17800.00 DN125 个9000.00 DN100 个4965.00 DN100 个2089.00 DN300 个34560.00 DN150 个10110.00 DN125 个5620.00 DN125 个3368.00手动排泥阀KH744X PN10/16 DN50 个1450.00 DN200 个14500.00 DN150 个5964.00 DN150 个3819.00 DN65 个1780.00 DN250 个25602.00 DN200 个8946.00 DN200 个6938.00 DN80 个2250.00 DN300 个37800.00 DN250 个1449.00支管减压阀KHYZX-11PN16DN15 个880.00 DN100 个3369.00 DN350 个40005.00 DN300 个21147.00 DN20 个1350.00 DN125 个8560.00 DN400 个47800.00 DN350 个45860.00 DN25 个1450.00 DN150 个11580.00 DN450 个48950.00 DN400 个79841.00 DN32 个1690.00 DN200 个22592.00 DN500 个51005.00 DN40 个2000.00第 6 页共39 页比例式减压阀KHYB43X1：3 DN40 个1400.00倒流防止器KHHS41XPN16DN40 个3133.00水锤吸纳消除器KH8000PN16DN40 个3595.00黄铜丝口球阀KHQ11FPN16DN15 个53.00 DN50 个1428.00 DN50 个3133.00 DN50 个3973.00 DN20 个74.00 DN65 个1684.00 DN65 个4099.00 DN65 个5074.00 DN25 个112.00 DN80 个1747.00 DN80 个5074.00 DN80 个5292.00 DN32 个168.00 DN100 个2444.00 DN100 个6250.00 DN100 个6283.00 DN40 个277.00 DN125 个3360.00 DN125 个7249.00 DN125 个7294.00 DN50 个379.00 DN150 个7530.00 DN150 个10231.00 DN150 个8652.00 DN65 个677.00 DN200 个2606.00 DN200 个14734.00 DN200 个16783.00 DN80 个1165.00比例式减压阀KHYB43X1：2 DN40 个1312.00防污隔断阀KHHS41XPN16DN40 个1932.00 DN250 个28644.00 DN100 个1860.00 DN50 个1365.00 DN50 个1932.00 DN300 个41622.00丝口黄铜过滤器KHGL11WPN16DN15 个74.00 DN65 个1604.00 DN65 个2436.00多功能水泵控制阀KHD745XPN10/16DN40 个2167.00 DN20 个104.00 DN80 个1747.00 DN80 个3058.00 DN50 个2167.00 DN25 个176.00 DN100 个2331.00 DN100 个3822.00 DN65 个2528.00 DN32 个333.00 DN125 个3200.00 DN125 个5023.00 DN80 个2852.00 DN40 个441.00 DN150 个4658.00 DN150 个6560.00 DN100 个3578.00 DN50 个600.00 DN200 个6856.00 DN200 个10282.00 DN125 个4574.00 DN65 个1040.00比例式减压阀KHYB13X DN15 个2606.00双腔式安全泄压阀KHA742XPN10/16DN40 个3070.00 DN150 个5410.00 DN80 个1524.00 DN20 个3341.00 DN50 个3070.00 DN200 个8064.00 DN100 个2620.00 DN25 个5480.00 DN65 个3536.00法兰黄铜闸阀KHZ45WPN16DN40 个1225.00丝口黄铜止回阀KHH11WPN16DN15 个96.00 DN32 个8352.00 DN80 个3961.00 DN50 个1594.00 DN20 个132.00 DN40 个8420.00 DN100 个4477.00 DN65 个2164.00 DN25 个184.00 DN50 个10025.00 DN125 个5771.00 DN80 个2375.00 DN32 个297.00过滤型减压阀KHY11WPN16 DN15 个458.00 DN150 个6779.00 DN100 个3766.00 DN40 个384.00 DN20 个458.00 DN200 个9450.00 DN125 个8298.00 DN50 个542.00 DN25 个764.00不锈钢风机盘管20*300 条90.00 DN150 个12052.00 DN65 个1105.00 DN32 个966.00 20*400 条99.00 DN200 个24486.00 DN80 个1472.00 DN40 个1579.00 20*500 条107.00 DN250 个72624.00 DN100 个2578.00 DN50 个2268.00 25*300 条193.00 DN300 个95138.00丝口黄铜截止阀KHJ11WPN16DN15 个63.00普通型减压阀KHY11WPN16 DN15 个403.00 32*300 条233.00丝口黄铜闸阀KHZ11WPN16DN15 个58.00 DN20 个91.00 DN20 个424.00 40*300 条248.00 DN20 个72.00 DN25 个126.00 DN25 个668.00 50*300 条400.00 DN25 个116.00 DN32 个214.00 DN32 个714.00 65*300 条660.00 DN32 个176.00 DN40 个314.00 DN40 个1256.00 法兰黄铜过滤器KHGL41WPN16DN40 个1445.00 DN40 个218.00 DN50 个453.00 DN50 个2083.00 DN50 个2074.00 DN50 个340.00丝口排气阀KHB21XPN16 DN15 个74.00 DN65 个3186.00 DN65 个651.00 DN20 个77.00 DN80 个3704.00 DN80 个885.00 DN25 个91.00 DN100 个5451.00 DN100 个1467.00第7 页共39 页浙江盾安阀门有限公司广州总代理产品名称代号DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100 铜闸阀210 52.57 66.17 105.55 161.75 198.52 312.57 595.59 808.78 1341.88 带锁闸阀203 52.57 66.17 105.55 161.75 217.62 317.62 909.95 1600.83 磁性闸阀239 68.62 85.44 126.32 288.87 414.05足径闸阀212 59.25 74.64活接闸阀213 113.15钢柄球阀309 48.54 65.44 100.38 154.42 254.78 347.43 619.01 1066.08 1700.26 钢柄球阀（红管家）153 42.45 56.71 89.37 149.84 220.94 331.61钢柄高温球阀180 59.01 71.69 105.06钢柄足径球阀120 53.29 79.04 120.19卧式止回阀502 65.07 86.80 136.05 210.29 278.65 395.21 1010.98 1378.63 2426.39 立式止回阀501 45.94 60.25 86.80 123.53 185.29 293.39软密封截止阀401 58.82 81.59 114.84 196.10 287.08 413.17硬密封截止阀402 56.40 78.80 113.84 192.94 276.61 405.11过滤器601 66.17 94.29 160.08 303.32 402.54 549.27过滤器（B型）603 45.06 66.64 100.83 202.45 253.34 449.36排气阀701 66.72 70.04 83.01减压阀3002 188.00 198.32 311.69 332.44 586.90 973.01平衡阀426 157.21 207.08 292.31 356.57 505.04钢柄燃气球阀126A 53.80 68.90 104.49 162.54 262.38 367.63 849.74 1116.80钢柄燃气足颈球阀173 58.82 90.91 135.46 183.84 328.94 549.53法兰铜闸阀205 859.80 877.64 1119.63 1458.24 1979.39 2464.91 3443.81第8 页共39 页浙江盾安阀门有限公司广州总代理产品名称代号DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100 法兰球阀116 415.19 624.48 782.51 924.79 1209.35 1636.16 1991.87 2596.49 3805.83 法兰铜截止阀403 399.67 575.05 758.87 1173.35 1155.98 1831.79 2975.66 5228.59 7469.38 法兰铜过滤器602 1717.97 2464.91 3787.85 4404.15 6480.40 法兰铜止回阀503 1680.61 2352.88 3062.46 4014.78 弹性座密封闸阀RVHX 817.77 974.23 1184.00 1322.68 铸铁闸阀732.44 796.44 988.44 1098.68 蜗轮对夹蝶阀533.32 579.56 625.77 654.23 778.68 手动蝶阀211.56 260.97 306.84 336.00 458.68 法兰过滤器158.00 217.00 268.00 381.00 钢柄燃气内牙球阀129A 31.34钢柄燃气外牙球阀141A 31.52蝶柄燃气内牙球阀160 34.88蝶柄燃气外牙球阀161 34.88产品名称DN125 DN150 DN200 不锈钢波纹软管单价不锈钢波纹软管单价法兰铜闸阀14216.58 20645.76 41944.31 20*300 73.70 40*250 202.98 弹性座密封闸阀2336.00 2485.32 3484.44 20*400 80.93 50*250 327.46 铸铁闸阀1848.88 2023.12 3054.23 20*500 87.62蜗轮对夹蝶阀917.32 1016.88 1692.44 20*600 124.80手动蝶阀597.32 995.56 1457.77 25*300 126.82法兰过滤器1816.00 2592.00 3836.00 32*300 180.54宁波埃美柯阀门有限公司广州总代理2012年1月1日起执行，以前价格同时作废单价规格DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100 名称代号丝口铜闸阀108 17.40 24.40 32.00 43.80 58.90 87.42 186.01 288.31 449.00丝口铜球阀216 15.00 21.50 33.30 52.20 81.10 122.30 263.00 394.70 605.60 丝口铜球阀266 12.70 17.80 28.23 42.73 67.16 95.70丝口铜闸阀168 15.70 21.60 30.70 40.20 55.70 81.60丝口截止阀306 14.92 20.51 31.50 46.94 64.90 101.22丝口截止阀302 17.60 24.60 37.20 56.20 87.60 126.70 456.50 1540.00 2138.00丝口止回阀401 18.80 26.00 39.10 61.30 85.50 120.80 271.40 427.90 708.40丝口过滤器606 15.00 22.80 34.30 46.80 57.50 97.10 233.50 368.00 620.50丝口浮球阀906 28.30 62.70 64.40 86.60 114.20 169.50 267.50 398.60 738.20丝口减压阀718 60.10 80.00 140.00 218.50 318.20 530.30丝口电磁阀742 140.00 172.00 230.00 456.00 472.00 680.00丝口排气阀705 20.50 22.80 28.70丝口不锈钢球阀8252 33.00 46.00 48.00 54.00 69.50 93.00冷水表 E 44.10 52.00 75.50 112.00 153.00 228.00 352.00 367.00 418.00热水表 E 56.20 65.80 92.00 114.00 168.00 278.00 392.00 486.00 550.00可拆式水表 E 55.00 64.00 89.00 115.00 168.00 242.00 380.00 412.00 450.00法兰铜闸阀106 105.00 135.00 182.00 285.00 365.00 460.00 640.00 810.00 1145.00手动蝶阀882 66.00 68.00 78.00 93.90 122.00蜗轮蝶阀883 112.00 124.00 138.00 157.00 188.00天津莱斯特阀门有限公司手动蜗轮电动手动法兰蜗轮法兰四氟蜗轮四氟卡箍蜗轮卡箍信号蝶型带伸缩D71X-16 D371X-16 D971X-16 D41X-16 D341X-16 D71F-16 D371F-16 D81-16 D381-16 SFD71X-16H77X-16 SD341X-16DN40 88.00 188.00 2200.00 228.00 332.00 164.00 264.00 400.00 108.00 780.00 DN50 88.00 188.00 2200.00 228.00 332.00 164.00 264.00 300.00 464.00 400.00 108.00 780.00 DN65 108.00 208.00 2240.00 268.00 372.00 212.00 312.00 320.00 488.00 420.00 140.00 800.00 DN80 132.00 232.00 2280.00 312.00 416.00 296.00 392.00 360.00 536.00 460.00 168.00 920.00 DN100 168.00 268.00 2320.00 416.00 532.00 392.00 492.00 528.00 692.00 520.00 208.00 1060.00 DN125 212.00 312.00 2400.00 600.00 704.00 480.00 600.00 740.00 952.00 620.00 260.00 1320.00 DN150 252.00 352.00 2480.00 732.00 836.00 560.00 656.00 824.00 1016.00 700.00 312.00 1600.00 DN200 500.00 716.00 5000.00 1140.00 1320.00 920.00 1116.00 1400.00 1820.00 1240.00 608.00 2440.00 DN250 800.00 1032.00 5600.00 1600.00 1784.00 1380.00 1576.00 1720.00 1056.00 3240.00 DN300 1420.00 6000.00 2360.00 2508.00 1568.00 4680.00 DN350 1800.00 12400.00 3060.00 3552.00 2156.00 6120.00 DN400 3692.00 14000.00 5400.00 5480.00 3504.00 9000.00 DN450 4536.00 16000.00 7000.00 9184.00 5920.00 12400.00 DN500 6500.00 20000.00 8120.00 13440.00 6560.00 17200.00 DN600 11200.00 26640.00 12920.00 23920.00 10912.00 24800.00闸阀止回阀Z15T-16 Z44T-16 Z45T-16 Z45T-16铜杆 Z45X-16 Z41H-16C Z41W-16P Z11W-16P H44T-10 H44X-16 H71X-16 H41X-16 H77X-16 H44H-16C H44H-16P DN15 40 380 980 140DN20 52 400 1020 180DN25 64 440 1060 260DN32 92 540 1320 360DN40 124 620 1760 480DN50 184 400 400 500 520 700 2200 720 300 640 96 220 140DN65 276 460 440 540 600 880 2880 360 780 140 280 180DN80 396 520 520 620 700 1120 3600 480 840 156 328 240DN100 636 560 560 660 760 1400 4600 520 920 192 392 280DN125 920 540 1120 1360 1720 6720 880 1240 332 680 360DN150 **** **** 1400 1480 2240 9200 1080 1680 380 720 440DN200 1660 1720 2200 2400 14800 1600 3400 980 1480 840DN250 2720 2720 5400 4600 2600 5200 1920 2600 1320DN300 4200 4400 6800 6000 3800 6600 1760DN350 6600 6600 11600 6400 3000DN400 8800 8800 14400 8400 4000DN450 13200 13400 13400 14000 5600DN500 15200 15200 25200 16000 6000DN600 22000 22000 38000 26000 11200过滤器蝶阀截止阀GL11H-16 GL41H-16 GL41H-16C GL41H-16P GL11H-16P D71X-16 D371X-16 D971X-16 D71X-16P D371H-16 J41T-16 J41H-16C J41H-16P J11T-16P DN15 580 140 360 780 140 DN20 660 180 380 880 180 DN25 300 740 260 400 980 260 DN32 360 880 360 480 1220 360 DN40 440 1180 480 144 288 540 1540 480 DN50 200 520 1240 680 144 288 2400 620 1920 680 DN65 260 780 1680 168 308 2480 880 2680DN80 320 880 2200 196 348 2520 1120 3520DN100 392 1120 2800 236 388 2800 1360 4400DN125 580 1800 4800 308 480 2920 1720 6800DN150 800 2080 6000 384 668 3040 2240 9800DN200 1240 9200 660 920 4800 16800DN250 2640 1360 5280DN300 3800 1800 6000DN350 8000 2600 7200DN400 10000 4800 12000DN450 6600 14000DN500 8680 16000DN600 13200 24000球阀不锈钢丝口弯头不锈钢丝口直通不锈钢丝口六角不锈钢丝口三通不锈钢丝口活接不锈钢焊接弯头不锈钢焊接三通不锈钢焊接法兰PN1.0Q11F-16 Q41F-16 Q41F-16C Q41F-16P 广式一片式二片式DN15 320 560 40 60 100 12 10 8 16 40 24 60 120 DN20 360 680 52 100 152 18 14 12 24 48 28 64 128 DN25 380 740 72 140 200 26 18 16 32 56 32 72 140 DN32 420 920 120 220 320 42 28 28 60 80 48 80 192 DN40 460 1120 200 280 480 64 36 32 72 100 60 100 232 DN50 520 1320 240 360 620 76 52 48 100 140 72 120 260 DN65 720 1920 520 180 240 320 DN80 920 2320 700 220 360 380 DN100 1180 3000 320 480 480 DN125 1920 5400 680 860 680 DN150 **** **** 800 1020 800 DN200 2600 1080 DN250DN300DN350DN400DN450DN500DN600闸阀球阀规格Z15T-16 Z45T-16 Z41T-16 Z44T-16 Z45X-16 Z40H-16C Z40H-25C Q11F-16 Q41F-16 Q41F-16C Q41F-25C DN15 47.20 46.80 145.20 308.00 308.00 DN20 56.80 57.20 185.60 352.00 352.00 DN25 80.80 72.80 206.00 384.00 384.00 DN32 104.40 106.00 268.00 520.00 520.00 DN40 131.20 408.00 428.00 380.00 1028.00 1028.00 168.80 352.00 664.00 664.00 DN50 200.00 620.00 672.00 572.00 576.00 1336.00 1336.00 204.00 440.00 760.00 760.00 DN65 732.00 772.00 660.00 688.00 1736.00 1736.00 604.00 1108.00 1224.00 DN80 924.00 980.00 840.00 836.00 2148.00 2148.00 808.00 1400.00 1456.00 DN100 1156.00 1196.00 1008.00 1148.00 2652.00 2860.00 1140.00 1920.00 2040.00 DN125 1740.00 1848.00 1512.00 1700.00 4008.00 4280.00 2480.00 3380.00 3744.00 DN150 2268.00 2384.00 2040.00 2112.00 5304.00 5700.00 2816.00 4664.00 4996.00 DN200 3664.00 3784.00 3180.00 3448.00 7808.00 8704.00 8156.00 8996.00 DN250 5840.00 6000.00 5260.00 4896.00 11968.00 12720.00DN300 8480.00 8800.00 8020.00 6844.00 15996.00 17636.00DN350 22032.00 24384.00DN400 26240.00 30672.00DN450 34800.00 40268.00DN500 43244.00 51748.00DN600 73088.00 79344.00。