iksemel-1.2

合集下载

克卢布尔仕BEM 41-132产品说明书

Klüberplex BEM 41-132, Prod. 020256, en Edition 24.03.2014 [replaces edition 31.07.2014]Benefits for your application–Longer service life due to special wear additives for roller bearings –Less maintenance –Versatile grease due to wide operating temperature range and optimised oil release DescriptionKlüberplex BEM 41-132 is based on synthetic hydrocarbon oil,mineral oil and a special lithium soap. Special additives ensureoptimum oxidation resistance as well as protection against wearand corrosion.Application Klüberplex BEM 41-132 can be used for long-term or lifetime lubrication of rolling bearings at operating temperatures between70 and 110 °C.For rolling bearings with a high degree of sliding friction, e.g.–tapered roller bearings –cylinder roller bearings –spherical roller bearings orfor-life lubricated deep groove ball bearingsandrolling bearings e.g. in–paper-making machines (dry section)–textile machines (dry section)–electric motors –hot air blowers –drying ovens –air separators in the base materials industry –generators in wind power plantsor rolling bearings in vehicle components–clutch bearings –generator bearings –water pump bearings –fluid fan bearings Application notes Klüberplex BEM 41-132 is applied by means of spatula, brush or grease gun. For application via automatic lubricating systems,pumpability should be checked beforehand. Prior to series application we recommend testing the compatibility of the lubricant with the materials in contact.Material safety data sheets Material safety data sheets can be requested via our website . You may also obtain them through your contact person at Klüber Lubrication.Klüberplex BEM 41-132High-temperature and long-term grease for rolling bearingsProduct informationProduct informationKlüberplex BEM 41-132High-temperature and long-term grease for rolling bearingsKlüberplex BEM 41-132, Prod. 020256, enEdition 24.03.2014 [replaces edition 31.07.2014]Klüber Lubrication – your global specialist Innovative tribological solutions are our passion. Through personal contact and consultation, we help our customers to be successful worldwide, in all industries and markets. With our ambitious technical concepts and experienced, competent staff we have been fulfilling increasingly demanding requirements by manufacturing efficient high-performance lubricants for more than 80 years.Klüber Lubrication München SE & Co. KG /Geisenhausenerstraße 7 / 81379 München / Germany /phone +49 89 7876-0 / fax +49 89 7876-333.The data in this document is based on our general experience and knowledge at the time of publication and is intended to give information of possible applications to a reader with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary field tests with the product selected for a specific application. All data are guide values which depend on the lubricant's composition, the intended use and the application method. The technical values of lubricants change depending on the mechanical, dynamical, chemical and thermal loads, time and pressure. These changes may affect the function of a component. We recommend contacting us to discuss your specific application. If possible we will be pleased to provide a sample for testing on request. Klüber products are continually improved. Therefore, Klüber Lubrication reserves the right to change all the technical data in this document at any time without notice.Publisher and Copyright: Klüber Lubrication München SE & Co. KG. Reprints, total or in part, are permitted only prior consultation with Klüber LubricationMünchen SE & Co. KG and if source is indicated and voucher copy is forwarded.Product information。

爱露丝美颜枪详细操作说明及产品成分表

产品介绍玻尿酸水润精华液（补水美白）高效修护保湿玻尿酸水润精华液，采用大小分子玻尿酸，小分子渗透补水，24小时面膜级持久保湿，唤醒水光嫩肌；内含冰川雪域小球藻生长因子及专利抗刺激因子，深层修复肌肤屏障，快速舒缓过敏症状；独家纳米金萃取技术，改善皮下循环系统，加速细胞生长，去黄提亮，肌表焕白。

适合肤质：所有肤质焕颜紧致精华液（祛皱抗衰）独家三项专利研发的焕颜紧致精华液，富含寡肽-1和源自冰川雪域的小球藻生长因子，快速修复激素肌肤，缓解过敏症状，修复过敏细胞；六胜肽生物活性配方，塑造肌肤饱满丰盈，紧致轮廓；独家纳米金萃取技术，快速激活肌肤细胞内胶原蛋白和弹性纤维的再生，提升肌肤的自我修复和更新能力，帮助预防细胞提前衰老，焕颜新肤，逆龄生长。

适合肤质：所有肤质爱露丝纳米微晶导入仪特点：无创无痛透皮渗透高效安全操作便捷创新科技，颠覆传统。

突破传统护肤微针技术，无需手术、没有创伤、不用注射，爱露丝纳米微晶导入仪采用美国进口单晶硅材料制作而成，利用生物芯片与半导体纳米技术，配合导入仪的高频振动，15分钟打开10000+个养分通道，将活性成分输送到皮肤角质层60—70微米以下，是传统护肤吸收的20倍。

组装方法1.打开包装，取出纳米微晶导入仪，然后选取需要护肤效果的原液瓶。

2.左手持导入仪，右手持原液瓶，拧开原液瓶旋转保护盖的一头。

3.将原液瓶手持向上把装有硅胶胶塞的一头，装入纳米微晶导入仪枪头。

操作方法点提法1.爱露丝纳米微晶导入仪安装完毕后。

2. 长按开机电源，开机第一档为低速档，按第二下为中速档，第三下为高速挡。

长按关机。

3. 开机后枪口朝下垂直直接接触皮肤表面，控制好导入仪斜度，以免原液没有均匀流出。

4. 轻轻按压达到一定力度即可触发高频导入电机，开启养分输入通道.5. 通过快速、密集、轻柔的上下一点一提作用于操作部位，快速呈现美肤效果6. 护理完之后无需清洗，再使用一片修复面膜，20分钟以后再清洗面部，对皮肤起到一个更好的吸收和修复效果。

立赛 LISAMTM尖晶石微粉产品说明书

尖晶石微粉
立赛LISAM™
我们致力于为您提供最好的产品和服务地址:浙江省绍兴市上虞区杭州湾工业园区电话:86-575-82112629
4 包装、
贮存以及保质期包装采用根据客户要求的方式（25kg 纸
塑编袋、1吨吨袋等），以方便运输、保存和使用。

为了将产品保存更长时间，达到最佳使用效果，我们建议您尽量不要更换原包装，并在贮存期保护好外包装，以便减小外部潮湿空气对产品质量和储存期的影响。

电炉小炉盖
VOD 炉炉盖
尖晶石微粉
立赛LISAM™
[2]：物理指标中筛分≤45um ，使用325目筛网测试水洗通过率；
[3]：物理指标中粒度分布D50/D90采用Mastersizer 3000激光粒度测试仪进行检测。

以上典型值为公司实际生产平均值（以公司检测标准为准）。

公司有权根据内部技术进步发展更改生产数据
我们致力于为您提供最好的产品和服务地址:浙江省绍兴市上虞区杭州湾工业园区电话:86-575-82112629
我们致力于为您提供最好的产品和服务地址:浙江省绍兴市上虞区杭州湾工业园区电话:86-575-82112629
7
物流运输
8
联系方式
浙江自立新材料股份有限公司
地址：浙江省绍兴市上虞区百官街道百谢路电话:+86-0575-******** 传真:+86-0575-******** Email:*********************网址：
Zili USA LLC
地址: 100 Ali Street, Pittsburgh, PA,15215,USA 电话: +001-412-418-6676 Email:****************。

香水广告策划案

某香水广告策划案某香水广告策划案一、前言“闻香识女人”，没有香味的女人，如同没有香味的花一样，是朵塑料花?。

可见，香氛与女人有着如此密不可分的关联，不同层次，不同性情，不同爱好的人们。

由于各自同异的性格而偏爱某种特殊香味的香氛。

于是，女人在选用香氛增添自己魅力的同时，也正在向人们展示您的热情与情趣。

在经济高速发展的今天，我们越来越感觉到香水对女人的重要性。

二、市场概况法国着名化妆品兰蔻一向是以高贵的品质和优良的品质着称。

提到兰蔻人们总是非常的信任其产品。

产品品牌?包装?规格（ml)?价格(元）克里司汀?迪奥（Christian?Dior）?首个时装系列"The?New?Look"为女性形象起革命，显露女性优美纤腰、香肩和美腿的时装款式，?50?302香奈儿(Chanel)?长方体附以利落线条的香水瓶，状如宝石切割般形态的瓶盖，N O．5的黑色字眼呈现于白底上。

?50?476兰蔻(Lancome)?瓶身是一个充满光芒的玻璃球体?50?435雅诗兰黛(Estee?Lauder）?其瓶体造型简洁大方，?50?386产品品牌?广告语?费用（万元）克里司汀?迪奥（Christian?Dior）?这世界不再黑白两色，It’s?gold?562.59 香奈儿(Chanel)?每一个活着的女人都需要香奈儿五号?124.76兰蔻(Lancome)?我的兰蔻，我的花样年华?6373.35雅诗兰黛(Estee?Lauder）?象水一样的香水?154.08三、消费者研究一）.1.一般应用化妆场合：1）参加正式宴会2）平时上班3）外出逛街２.使用品牌状况：1）未婚女姓偏爱花香型香水系列2）各种品牌，各具功能３.购买状况：1）用完再买2）没用完，看到喜欢就买3）亲友赠送４.购买地点及方式未婚1）百货专柜2）大型商场或卖场3）国外带回已婚1）百货专柜或百货行2）问朋友而去购买（包括厂牌，地点）3）国外带回５.产品特性之探讨1）外观2）可以更换3）携带方便4）保养功能5）高级6）色彩7）精致６.全球化妆品市场调查报告2002年上半年期刊广告投放前10位品牌?单位：万元? 排名?品牌?2002年1-6月?2001年1-6月?同比增长率1?欧莱雅?2047.38?1299.69?57.53%2?兰蔻?1731.03?851.35?103.33%3?SAMSUNG?1288.65?733.51?75.68%4?雅芳?1237.48?296.24?317.73%5?SK-II?1155.18?471.02?145.25%6?DELL?1147.18?551.17?108.13%7?INTEL?902.53?197.96?355.92%8?美宝莲?856.14?865.56?-1.09%9?CANON?764.04?613.76?24.49%10?香奈儿?753.54?342.68?119.90%二.）本公司产品：“珍宝”是第一款非佩提让本人研制的兰蔻香水，1990年推出，一直是最畅销的香水之一。

ioLogik E1200系列产品（E1210）更新说明书

Firmware for ioLogik E1200 Series (E1210) Release NotesSupported Operating SystemsNotesChangesApplicable ProductsBugs FixedN/A• Fixed inaccurate counter value when using Modbus to start a pulse (E1210/E1212/E1213).• Fixed opposite on/off pulse width display on web console (E1211/E1212/E1214).• Fixed that the offset scaling value will reset after changing the Alias name (E1260).• Fixed self-rebooting when entering URL in the browser for the configuration file.• Fixed EDS file import connection error.• Fixed failure when using save counter on power failure and reset counter at the same time (E1210/E1212/E1213).• Fixed inaccurate counter value when using high frequency (E1210/E1212/E1213).• Fixed that the trap community name is not included in the export file.• Fixed that EtherNet/IP cannot use the “Set Attribute Single” service.• Added an enable RESTful API setting in the configuration file.EnhancementsN/AioLogik E1210, ioLogik E1210-T• EtherNet/IP registration on Moxa’s licensing website is no longer required.• Added case insensitive content-length for RESTful API.New FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs Fixed• Added SNMP Trap Community Setting to the web console.• Added a note on the password settings page that passwords are limited to 16 characters.• Fixed DHCP lease time did not ask for extension when half of the lease time elapsed.• Closed IP forwarding function (Port 0).• Closed UDP Port 161 when SNMP agent is disabled.• Fixed RESTful API header case-sensitive issue.• Fixed invalid token issue on login page when using Firefox.EnhancementsN/AioLogik E1210-T, ioLogik E1210• Added OPTIONS method for RESTful API.• Added quick access URI for RESTful API.New FeaturesN/A• This version of the firmware only works with ioSearch v2.0 or later versions.• To prevent system failure, only update the next or the previous released firmware version to prevent from system failure.Supported Operating SystemsNotesChangesApplicable ProductsBugs FixedN/A• Fixed file transfer problems when using the Chrome browser (e.g., firmware update, configuration import or export).EnhancementsN/AioLogik E1210, ioLogik E1210-T• Added the EtherNet/IP protocol.• Added RESTful API.• Added new registers for the Modbus/TCP protocol.• Added new OIDs for the SNMP protocol.• Modbus, EtherNet/IP, and RESTful services can be disabled (enabled by default).• Added sending heartbeat to port 9500 of MX-AOPC UA Server after the heartbeat function is enabled.• Increased password length from 8 to 16 characters.• Added a function to check special characters to prevent Cross-Site Scripting.• Passwords are now sent using the POST method instead of the GET method.New FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs FixedN/AN/AEnhancementsN/AioLogik E1210, ioLogik E1210-T• Improved protocol efficiency for the ioLogik 2500 Series.New FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs FixedN/A• Unable to disable the P2P heartbeat interval.• When the P2P client heartbeat is larger than 256 the time interval is incorrect.EnhancementsN/AioLogik E1210, ioLogik E1210-T• Supports ioLogik 2500 expansion mode.• Supports setting an initial value for a counter.New FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs FixedN/A• The counter storage is deleted when the power fails.EnhancementsN/AioLogik E1210-T, ioLogik E1210• Supports SNMP protocol.• Added P2P heartbeat function.New FeaturesN/A• This version of firmware only works with ioSearch v1.5 or later versions.• Use the web console when upgrading the firmware from v1.0 to v1.10.Supported Operating SystemsNotesChangesApplicable ProductsBugs Fixed• Ensured that the system works properly after unstable power conditions.N/AEnhancementsN/AioLogik E1210, ioLogik E1210-TN/ANew FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs Fixed• Improved firmware upgrading speed.• Removed Modbus/TCP ID checking mechanism.N/AEnhancementsN/AioLogik E1210, ioLogik E1210-T• Added "Locating I/O" function in General Settings.• Added Modbus address function code=0x08 for “ECHO” function.• Counter overflow status displayed in Channel Settings can be cleared manually.New FeaturesN/A• This version of the firmware only works with ioSearch v1.5 or later versions.• Use the web console when upgrading the firmware from v1.0 to v1.9.。

Model 393B12 Seismic高敏度陀螺仪产品说明书

Model 393B12Seismic, high sensitivity, ceramic shear ICP® accel., 10 V/g, 0.15 to 1k Hz,Installation and Operating ManualFor assistance with the operation of this product,contact PCB Piezotronics, Inc.Toll-free: 800-828-884024-hour SensorLine: 716-684-0001Fax: 716-684-0987E-mail:************Web: The information contained in this document supersedes all similar information that may be found elsewhere in this manual.Total Customer Satisfaction – PCB Piezotronics guarantees Total Customer Satisfaction. If, at any time, for any reason, you are not completely satisfied with any PCB product, PCB will repair, replace, or exchange it at no charge. You may also choose to have your purchase price refunded in lieu of the repair, replacement, or exchange of the product. Service – Due to the sophisticated natureof the sensors and associated instrumentation provided by PCB Piezotronics, user servicing or repair is not recommended and, if attempted, may void the factory warranty. Routine maintenance, such as the cleaning of electrical connectors, housings, and mounting surfaces with solutions and techniques that will not harm the physical material of construction, is acceptable. Caution should be observed to insure that liquids are not permitted to migrate into devices that are not hermetically sealed. Such devices should only be wiped with a dampened cloth and never submerged or have liquids poured upon them.Repair – In the event that equipment becomes damaged or ceases to operate, arrangements should be made to return the equipment to PCB Piezotronics for repair. User servicing or repair is not recommended and, if attempted, may void the factory warranty.Calibration – Routine calibration of sensors and associated instrumentation is recommended as this helps build confidence in measurement accuracy and acquired data. Equipment calibration cycles are typically established by the users own quality regimen. When in doubt about a calibration cycle, a good “rule of thumb” is to recalibrate on an annual basis. It is also good practice to recalibrate after exposure to any severe temperature extreme, shock, load, or other environmental influence, or prior to any critical test.PCB Piezotronics maintains an ISO-9001 certified metrology laboratory and offers calibration services, which are accredited by A2LA to ISO/IEC 17025, with full traceablility to N.I.S.T. In addition to the normally supplied calibration, special testing is also available, such as: sensitivity at elevated or cryogenic temperatures, phase response, extended high or low frequency response, extended range, leak testing, hydrostatic pressure testing, and others. For information on standard recalibration services or special testing, contact your local PCB Piezotronics distributor, sales representative, or factory customer service representative. Returning Equipment – Following these procedures will insure that your returned materials are handled in the most expedient manner. Before returning any equipment to PCB Piezotronics, contact your local distributor, sales representative, or factory customer service representative to obtain a Return Warranty, Service, Repair, andReturn Policies and InstructionsMaterials Authorization (RMA) Number. This RMA number should be clearly marked on the outside of all package(s) and on the packing list(s) accompanying the shipment. A detailed account of the nature of the problem(s) being experienced with the equipment should also be included inside the package(s) containing any returned materials.A Purchase Order, included with the returned materials, will expedite the turn-around of serviced equipment. It is recommended to include authorizationon the Purchase Order for PCB to proceed with any repairs, as long as theydo not exceed 50% of the replacement cost of the returned item(s). PCB will provide a price quotation or replacement recommendation for any item whose repair costs would exceed 50% of replacement cost, or any item that is not economically feasible to repair. For routine calibration services, the Purchase Order should include authorization to proceed and return at current pricing, which can be obtained from a factory customer service representative.Warranty – All equipment and repair services provided by PCB Piezotronics, Inc. are covered by a limited warranty against defective material and workmanship for a period of one year from date of original purchase. Contact PCB for a complete statement of our warranty. Expendable items, such as batteries and mounting hardware, are not covered by warranty. Mechanical damage to equipment due to improper use is not covered by warranty. Electronic circuitry failure caused by the introduction of unregulated or improper excitation power or electrostatic discharge is not covered by warranty. Contact Information – International customers should direct all inquiries to their local distributor or sales office. A complete list of distributors and offices can be found at . Customers within the United States may contact their local sales representative ora factory customer service representative. A complete list of sales representatives can be found at . Toll-free telephone numbers for a factory customer service representative, in the division responsible for this product, can be found on the title page at the front of this manual. Our ship to address and general contact numbers are:PCB Piezotronics, Inc.3425 Walden Ave.Depew, NY 14043 USAToll-free: (800) 828-884024-hour SensorLine SM: (716) 684-0001 Website: E-mail:************DOCUMENT NUMBER: 21354 DOCUMENT REVISION: B ECN: 17900。

(A包)全自动酶免工作站性能参数

（A包）全自动酶免工作站性能参数1、基本要求1.1原装进口；1.2全自动完成酶免试验的一般性实验步骤，包括加样、稀释、孵育、洗板、读数、出报告等，适用于所有ELISA方法的试验项目，测试程序与试剂完全开放，实验人员可任意编程，可单独进行上述任意试验步骤或某几个试验步骤的组合；1.3全自动完成血凝和血凝抑制实验的加样过程，包括加样、倍比稀释、加试剂等步骤；1.4连续批量进样、连续进板，立体交通式连续运行，不受批次限制；1.5能同时在线检测项目≥20个，同一板上可同时运行≥12个项目，可实现批量运行、无人值守；2、主机平台2.1 *工作平台至少可容纳28块微孔板，并至少具有9块加样板位；2.2 *机械臂：含有至少2独立个机械臂，1个8通道移液机械臂和1个移板机械臂，双机械臂相互独立，且可以同时运行；2.3主机平台带工作状态指示灯，具有声光双重报警系统；2.4具有安全防护面板，配备门锁，可防止非法进入工作台面，面板带有暂停按钮，可在任一时间进行暂停，处理异常事件；2.5洗板机、酶标仪等功能模块均由同一厂家生产以保证实现数据无缝整合；2.6控温孵育位应≥12个；2.7常温孵育位应≥24个；3、8通道移液机械臂3.1具有8个独立的移液通道，基于管泵的液体置换或者气体加样原理，以稳定的系统液作为媒介，保证加样的稳定、准确、快速；配备可清洗钢针模块，既可使用清洗钢针也可使用一次性加样针进行加样，实验人员可自行进行切换或更换；3.2加样精度：CV≤3.5%(10μl时)；CV≤0.75%(100μl时)；3.3每根钢针均具备独立的电容式液面感应功能，可鉴别凝块、气泡等，可实时报警并给出相应处理提示；3.4加样针清洗方式：活性洗涤工作站,内外壁分开清洗，可编程控制洗涤参数，交叉污染率≤1ppm。

4、移板机械臂4.1具有独立移板机械臂，机械手臂可进行水平方向的旋转和延展，旋转角度≥270°，可操作层架式立体储板架，对任意位置的板架进行任意取放；4.2可夹取微孔板、深孔板、试剂架、一次性枪头盒等各种物品，不受样品高度限制，最大承重不少于400g；4.3具有抓板传感器，可对抓板失败、掉板及错误放板等情况进行自动报警。

Swan AMI Silitrace 快速参考指南说明书

OverviewA – PanelB – Standard bottleC – Grab sample bottleD – Solenoid valve for zero calibrationE – Photometer moduleF – 6-way valveG – Flow regulating valve H – Flow cell I – Flow meter J – Sample inlet K – Sample outlet L – Reagent 4 M – Reagent 3 N – Reagent 2 O – Reagent 1P – Peristaltic pump Q – TransmitterKeysA – to exit a menu or command (rejecting any changes) to moveback to the previous menu levelB – to move DOWN in a menu list and to decrease digitsC – to move UP in a menu list and to increase digitsD – to open a selected sub-menu to accept an entryDisplayA – INIT Warming up the reaction chamberRUN normal operationHOLD input closed or cal delay: Instrument on hold (shows status of signal outputs).OFF input closed: control/limit is interrupted (shows status of signal outputs).GRAB A grab sample measurement is in progress B – ERROR Error Fatal ErrorC – Reagent low, indicates remaining reagents in % (17% = 340 ml)D – Keys locked, transmitter control via ProfibusE – TimeF – Process value with time stampG – Reaction chamber temperature Target: 45°C H – Sample flow - 5 – 10 l/h I – Relay statusRelay status, symbolsupper/lower limit not yet reached upper/lower limit reached control upw./downw. no actioncontrol upw./downw. active, dark bar indicates control intensity motor valve closedmotor valve: open, dark bar indicates approx. positiontimertimer: timing active (hand rotating)Overview - continuedDisplay when operating with two or more sample streamsIcon descriptionF – Process values with time stampSi1 –Si6: Sample streams 1 to 6, according to the number of available channels.Up to 3 process values can be displayed on one screen.Toggle screens with the [] key.Active measurement Position of valve ~ No sample flown Measurement not validx Sample stream inactive (only visible if a Sample Sequencer isconnected to the AMI Silitrace and measuring mode <internal> is selected).It is common for “n” to display on occasions at the right -hand side until the analyser has “validated” the measurement.MaintenanceDaily – Check flow on all channels. Check timestamp of last measurement. – Check reagent levels Monthly – Replace reagentsEvery 2 – 3 months – Check standard solution and exchange if necessary. Semiannual – Exchange pump tubes. Perform a calibration after exchanging the pump tubes. When required – E020, FOME dirty: Clean the photometer with 5% NH3 solution.CAUTION - Pollution of reagents possible.If the occlusion frames of the peristaltic pump are opened during operation, already mixed reagents will flow back into the reagent canisters and pollute the reagents. Refer to the Maintenance section of the manual for more information.ZeroBy default, the system is programmed to carry out an automatic zero at 12:30am every day. To check the results of the zeroing process, Select DIAGNOSTICS -> SENSORS -> HISTORY -> ZERO HISTORY. The value should be close to 2.2VTo manually perform a zero, select MAINTENANCE -> ZEROVerificationBy default, the system is programmed to carry out an automatic verification at 06:00am every Monday. To check the results of the verification process, Select DIAGNOSTICS -> SENSORS -> HISTORY -> VER. HISTORY. The value should be close to the value of the standard being used (eg 100ppb) To manually perform a zero, select MAINTENANCE -> VERIFICATIONCalibrationTo check the results of the calibration process, Select DIAGNOSTICS -> SENSORS -> HISTORY -> CAL.HISTORY.To manually perform a zero, select MAINTENANCE -> CALIBRATIONA calibration should be performed when the peristaltic pump tubes are replacedReagent set for AMI SillitraceContents♦ Reagent 1: bags 1a and 1b for canister 1 ammonium molybdate and sodium hydroxyde ♦ Reagent 2: bottle 2 for canister 2 sulphuric acid 25% ♦ Reagent 3: bag 3 for canister 3 oxalic acid dihydrate♦ Reagent 4: bag 4a and bottle 4b for canister 4 ammonium ferrous sulfate hexahydrate sulphuric acid 25%containing detergent ♦ Reagent filters (12x)CAUTIONChemical exposure hazard♦ Observe the necessary security measures when manipulating dangerous chemicals. ♦ Read the Material Safety Data Sheets carefully!Personal protective equipment:Reagent 3:H302: Harmful if swallowed.H312: Harmful in contact with skin. H315: Causes skin irritation.H318: Causes serious eye damage. H373: May cause damage to organs through prolonged or repeated exposure.Reagent 4a:H315: Causes skin irritationH319: Causes serious eye irritation H335: May cause respiratory irritationReagent 1b, reagent 2, reagent 4b:H314: Causes severe skin burns and eye damagePreparationNote: Please consider the following points when preparing new reagents:•Reagent 3, oxalic acid dissolves very slowly, we therefore recommend to prepare reagent 3 first.•Reagent 1, add sodium hydroxide (reagent 1b) first.•Before refilling rinse all containers well with demineralized water.Reagent 3:1Fill canister 3 with approx. 1.5 litres of ultrapure water.2Add reagent 3 to canister 3.3Close the canister with a screw cover and shake well.4Fill up the canister to the 2 L mark, close it and shake again.Reagent 1:1Fill canister 1 with approx. 1.5 litres of ultrapure water.2First add the content of bag 1b (sodium hydroxyde).3Close the canister with a screw cover and shake well until the sodium hydroxyde is dissolved.4Add the content of bag 1a.5Fill up the canister to the 2 L mark, close it and shake again.Reagent 2:1Fill canister 2 with approx. 1.5 litres of ultrapure water.2Add the bottle 2 (sulfuric acid 25%).3Close the canister with a screw cover and shake well.4Fill up the canister to the 2 L mark, close it and shake again.Reagent 4:1Fill canister 4 with approx. 1.5 litres of ultrapure water.2First add bag 4a.3Close the canister with a screw cover and shake well.4Add bottle 4b. Rinse the residual foam in bottle 4b with ultrapure water and fill it into the canister until the2 L mark is reached.5Close the canister with a screw cover and shake well. Some foam forms on thesurface.All canisters:Always replace the reagent filters (included with each reagent set) when preparing new reagents. Insert suction lances into the containers. Make sure that the numbers on the suction lances correspond to the numbers on the containers.Error Messages To view active error messages, press ENTER to open menu system, select MESSAGES -> PENDING ERRORS. Consult the manual for a full list of error messages.HINT: With any Swan system, press ENTER 3 times from the home screen to bring up the PENDING ERRORS list.Reorder codes。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

1.2 Using iksemel in Applications
You need to include ‘iksemel.h’ ﬁle in your source to access library API. You can do this with: #include "iksemel.h" Now you can use iksemel functions and compile your source. In able to link your compiled object ﬁles and generate your executable program, you have to link with iksemel library. This can be done with: gcc -o myprg src1.o src2.o src3.o -liksemel iksemel registers itself with pkg-conﬁg while installing, so if you are using autotools in your program, you can simply check the availability of iksemel and conﬁgure your build process accordingly with: PKG_CHECK_MODULES(IKSEMEL,iksemel,,exit) This would result in IKSEMEL LIBS and IKSEMEL CFLAGS substitution variables set to correct values.
Chapter 2: Tutorials
2
2 Tutorials
2.1 Parsing an XML Document
iksemel parser sequentally processes the XML document. Each encountered XML element (i.e. tags, character data, comments, processing instructions, etc.) is reported to your application by calling the hook functions you have provided. This type of interface is called SAX (serial access) interface. Parser stores its state in a small structure. This structure is referenced by iksparser type, and managed with following functions:
iksemel programmers manual
A tutorial and API reference for the iksemel library 1.2
¨ Copyright c 2001-2003 G¨ urer Ozen This is a free document; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version.You may obtain a copy of the GNU General Public License from the Free Software Foundation by visiting their Web site or by writing to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

i
Table of Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 1.2 Compiling the Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Using iksemel in Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2
Tutorials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.1 2.2 Parsing an XML Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Working with XML Trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2.1 Memory Management . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2.2 Creating a Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.2.3 Accessing a Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.2.4 Converting a Tree to an XML Document . . . . . . . . 11 2.2.5 Parsing a Document into a Tree . . . . . . . . . . . . . . . . 11 XML Streams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Writing a Jabber Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2.4.1 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2.4.2 Packets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2.4.3 Packet Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 2.4.4 Creating Common Packets . . . . . . . . . . . . . . . . . . . . . 20 Utility Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 2.5.1 Memory Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 2.5.2 String Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 2.5.3 SHA1 Hash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2.3 2.4
2.5
3
Development . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3.1 3.2 3.3 Roadmap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Coding Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Datatype Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Function Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Chapter 1: Introduction
1
1 Introduction
iksemel is an XML (eXtensible Markup Language) parser library designed for Jabber applications. It is coded in ANSI C for POSIX compatible environments, thus highly portable. It is free software released under the GNU Lesser General Public License. The purprose of this manual is to tell you how to use the facilities of the iksemel library. Manual is written with the assumption that you are familiar with the C programming language, basic programming concepts, XML and Jabber protocol.