进口水果箱头说明(简单版本)
水果包装设计说明
水果包装设计说明
水果是人们日常生活中必不可少的食品之一，而水果包装则是保护水果的重要手段。
好的水果包装设计不仅能够保护水果的新鲜度和品质，还能够提高消费者的购买欲望和品牌形象。
水果包装设计需要考虑到水果的特性。
不同种类的水果有着不同的特点，比如柿子容易烂，草莓容易碰伤，苹果容易受潮等等。
因此，在设计水果包装时，需要根据水果的特性选择合适的材料和包装方式，以保证水果的新鲜度和品质。
水果包装设计需要考虑到消费者的需求。
现代消费者对于水果包装的要求越来越高，他们不仅要求水果包装能够保护水果的品质，还要求包装设计美观、方便携带、易于开启等等。
因此，在设计水果包装时，需要考虑到消费者的需求，以提高消费者的购买欲望。
水果包装设计需要考虑到品牌形象。
好的水果包装设计不仅能够提高消费者的购买欲望，还能够提高品牌形象。
因此，在设计水果包装时，需要考虑到品牌的特点和形象，以设计出符合品牌形象的水果包装。
水果包装设计是一项非常重要的工作，它不仅能够保护水果的品质，还能够提高消费者的购买欲望和品牌形象。
因此，在设计水果包装时，需要考虑到水果的特性、消费者的需求和品牌形象，以设计出符合要求的水果包装。
JUMO 703041 产品说明书
Page 1/10JUMO GmbH & Co. KGDelivery address:Mackenrodtstraße 1436039 Fulda, GermanyPostal address:36035 Fulda, Germany Phone:+49 661 6003-0Fax:+49 661 6003-607Email:*************Internet: JUMO Instrument Co. Ltd.JUMO HouseTemple Bank, RiverwayHarlow, Essex CM 20 2DY, UK Phone:+44 1279 63 55 33Fax:+44 1279 62 50 29Email:*************.uk Internet:JUMO Process Control, Inc.6733 Myers RoadEast Syracuse, NY 13057, USA Phone:+1 315 437 5866Fax:+1 315 437 5860Email:****************Internet:JUMO dTRON 304/308/316Compact Controller with program functionBrief descriptionThe JUMO dTRON 300 series of controllers includes four freely programmable devices in different DIN formats for controlling temperature, pressure and other process variables. As a temperature controller (TR) according to EN 14597 the devices are used in heat-generating plants to control the temperature of liquids or gases (mode of action: 1B).The high-contrast, multicolor LC display for process value, setpoint and operator prompting contains two four-digit 7-segment displays, two single-character 16-segment displays, display of the active setpoints, six switch position indicators, and displays for the dimensional unit,ramp function and manual operation.Simple operation through 4 keys. The instruments can be used as 2-state, 3-state, modulating or continuous controllers. The controller software includes a program or ramp function,parameter set changeover, two autotuning (self-optimization) procedures, a math and logic module, as well as 4 limit comparators.Linearizations for the usual transducers are stored, and a customer-specific linearization table can be programmed.A setup program is available for user-friendly configuration from a PC.A serial interface for RS422/485 or Profibus-DP can be used to integrate the instruments into a data network.The electrical connection is made at the back, via screw terminals.The possible input and output configurations are shown in the following block diagram. The option boards are universally applicable for all instruments in the series.JUMO dTRON 304Type 703044/...JUMO dTRON 308Q Type 703043/...JUMO dTRON 308H Type 703042/...JUMO dTRON 316Type 703041/...Key features+Up to two programmable analog inputs +Four programmable setpoints,two parameter sets+Program function with 8 segments, or ramp function +Math and logic module + 4 limit comparators +Two timers+Two self-optimization procedures +Fast, user-friendly configuration through the setup program with program editor +RS422/485 interface or PROFIBUS-DP interfaceApprovals/marks of conformity (see technical data)Self-optimizationStandard features include the tried and tested self-optimization, which makes it possible for the controller to be matched to the control loop by a user who is not a control technology expert.This functions by evaluating the response of the control loop to specific changes in the manipulating variable. Either an oscillatory method or a step-response test can be selected. The step-response test is used, for example, in the plastics industry or in processes where the oscillatory method cannot be employed. The controller parameters that are calculated are: proportional band, reset time, derivative time, cycle time and filter time constant.Customer-specific linearizationIn addition to the linearizations for the usual transducers, a customer-specific linearization can also be created. The programming is carried out in the setup program, in the form of a table of values or a formula.User dataParameters which are frequently changed by the user can be combined at the operating level under “User data” (only through the setup program).Math and logic moduleOrder details: Extra code 214The math module makes it possible to combine values such as the setpoints, output levels and measurements from the analog inputs into a mathematical formula.The logic module can be used, for instance, to make a logical combination of logic inputs and limit comparator states.Up to two math or logic formulae can be entered through the setup program, and the results of the calculations can be presented at the outputs or used for internal purposes. Special types of controller Order details: Extra codes 217, 218 and 219 The instrument can be operated as a differential, humidity or ratio controller.Logic functions–Start/cancel self-optimization–Change to manual mode–Hold/cancel ramp–Controller off–Setpoint changeover–Parameter set switching–Key/level inhibit–Text display–Display off–Acknowledge limit comparators–Program start/hold/cancel–Timer start/stopThe logic functions can be combined with one another (only through the setup program).Functions of the outputs–Analog input variables–Math–Process value–Setpoint–Ramp end value–Control deviation–Output level–Controller outputs–Limit comparators–Control contacts–Logic inputs–Logic formula–Program end–Timer signals–Program/automatic signalRamp functionEither a rising or a falling ramp function can beused (increase or decrease in the setpoint).The change in setpoint value SP at t0 is thefinal value for the ramp. The ramp starts withthe setpoint at time t0. The slope of the rampcan be programmed; the sign (direction) of theslope is given by the relationship between thesetpoint at time t0 and the SP value. When thesupply voltage is switched on, the rampfunction starts with the momentary processDisplays and controls(1)7-segment display (factory setting: process value)four-digit, red; decimal place is configurable (automatic adjustment on display overflow) (2)Active setpoint (factory setting: SP1)SP1, SP2, SP3, SP4 (SP=setpoint); green;(3)7-segment display (factory setting: setpoint)four-digit, green; decimal place is configurable,also used for operator prompting (display of parameter and level symbols)(4)Keys(5)Indicationyellow, for- switch status of logic outputs 1—6 (display lights up = ON)- ramp/program function is active- active manual operation(6)16-segment display for the unit °C/°F and texttwo-digit, green; with symbols for h, min, %additional display options through the setup programTimersTwo timers are available for time-dependentcontrol. The status of the timers can beswitched through to the logic outputs orinternally processed for the activation or de-activation of time-dependent processes.Setup program (accessory)The setup program for configuring theinstrument is available in English, French andGerman. Using a PC, you can create and editsets of data, and transfer them to thecontroller or read them out from theinstrument. The data sets are stored andmanaged.Program editorFor the easy creation of programs.Startup functionTo check the control-loop behavior.A setpoint profile can be implemented with a maximum of 8 program segments. The settings for the segment setpoints (SPP1—SPP8) and segment times (tP1—tP8) are carried out at the user level. The time scale can be configured as mm:ss or hh:mm (s = seconds, h = hours). A program-end signal can be generated, and the program can be halted or canceled.Further functions can be defined through the setup program (start at process value, cyclical program handling, segment-by-segment assignment of parameter sets and four control contacts). The program profile can also be visualized.Parameter levelAll the parameters and their meanings are included in the table. Some parameters may be missing or meaningless for a particular type of controller. Two parameter sets can be stored, to handle special applications.Parameter Value range Factory setting MeaningProportional band 0 to 9999 digits 0 digits Size of the proportional band0 means that the controller structure is out of action!Derivative time 0 to 9999 sec 80 sec Influences the differential component of the controller output signalReset time 0 to 9999 sec 350 sec Influences the integral component of the controller output signalCycle time0 to 999.9 sec20.0 secWhen using a switched output, the cycle time should be chosen so that the energy flow to the process is ascontinuous as is practicable without overloading the switching elements.Contact spacing 0 to 999.9 digits 0.0 digits The spacing between the two control contacts for 3-state or modulating controllersSwitching differential 0 to 999.9 digits 1.0 digits Hysteresis for switching controllers with proportional band = 0Actuator time 5 to 3000 sec 60 sec Actuator time range used by the control valve for modulating controllersWorking point -100 to +100%0%The output level for P and PD controllers (if x = w then y = Y0)Output level limiting0 to 100%100%The maximum limit for the output level -100 to +100 %-100%The minimum limit for the output levelInterfacesRS422/RS485 interfaceThe serial interface is used for communication with higher-level (supervisory) systems.The Modbus protocol is used for transmission.PROFIBUS-DPThe Profibus-DP interface can be used to integrate the controller into a fieldbus system operating according to the Profibus-DP standard. This Profibus version is especially designed for communication between automation systems and decentralized peripheral devices at the field level, and optimized for speed.Data transmission is made serially, using the RS485 standard.GSD generator, the project-planning tool that is supplied with the package (G SD =Gerätestammdaten, i.e. device data), is used to make a selection of device characteristics for the controller to create a standardized GSD file that is used to integrate the controller into the fieldbus system.Technical dataThermocouple inputInput for resistance thermometerInput for standard signalsLogic inputsMeasuring circuit monitoringIn the event of a fault, the outputs move to a defined (configurable) status.Designation Measuring range Measuring accuracyAmbienttemperature error Fe-Con L Fe-Con J Fe-Con U Cu-Con T NiCr-Ni K NiCr-Con E NiCrSi-NiSi N Pt10Rh-Pt S Pt13Rh-Pt R Pt30Rh-Pt6Rh B W5Re-W26Re C W3Re-W25Re D W3Re-W26Re EN 60584EN 60584EN 60584EN 60584EN 60584EN 60584EN 60584EN 60584-200to +900°C -200to +1200°C -200to +600°C -200to +400°C -200to +1372°C -200to +1000°C -100to +1300°C 0to 1768°C 0to 1768°C 0to 1820°C 0to 2320 °C 0to 2495 °C 0to 2400 °C≤0.25%≤0.25%≤0.25%≤0.25%≤0.25%≤0.25%≤0.25%≤0.25%≤0.25%≤0.25% in the range 300 to 1820°C ≤0.25%≤0.25%≤0.25%100 ppm /°C 100 ppm /°C 100 ppm /°C 100 ppm /°C 100 ppm /°C 100 ppm /°C 100 ppm /°C 100 ppm /°C 100 ppm /°C 100 ppm /°C 100 ppm /°C 100 ppm /°C 100 ppm /°CCold junctionPt100, internalDesignationConnectionMeasuring rangeMeasuring accuracy Ambienttemperature error3-/4-wire2-wire Pt100EN 60751 (factory setting)2-wire / 3-wire / 4-wire -200to +850°C ≤0.05%≤0.4%50 ppm / °C Pt500EN 607512-wire / 3-wire / 4-wire -200 to +850°C ≤0.2%≤0.4%100 ppm /°C Pt1000EN 607512-wire / 3-wire / 4-wire -200 to +850°C ≤0.1%≤0.2%50 ppm /°C KTY11-62-wire -50 to +150°C≤2.0%50 ppm /°C Sensor lead resistance max. 30Ω per lead for 3-wire or 4-wire circuitMeasuring current approx. 250µALead compensationNot required for 3-wire or 4-wire circuit. With a 2-wire circuit, the lead resistance can be compensated in software by a correction of the process value.Designation Measuring rangeMeasuring accuracy Ambienttemperature error Voltage0(2)—10V 0—1VInput resistance R IN > 100k Ω≤0.05%≤0.05%100 ppm / °C 100 ppm / °C Current 0(4)—20mA, voltage drop 2.0—2.5V ≤0.05%100 ppm / °C Heating current 0— 50mA AC ≤1%100 ppm / °C Resistance transmittermin. 100Ω, max. 4k Ω±4Ω100 ppm / °CFloating contactsSensor Overrange /underrangeProbe or lead short-circuitProbe or lead breakThermocouple•-•Resistance thermometer •••Voltage2 — 10V 0 — 10V 0 — 1V ••••--•--Current4 — 20mA 0 — 20mA•••-•-Resistance transmitter--•• = recognized - = not recognizedControllerElectrical dataHousingRelay (changeover) for type 703042/43/44contact rating contact life 5A at 230VAC resistive load 1350,000 operations at rated load / 750,000 operations at 1A 1.3A with devices certified to DIN EN 14597Relay (changeover) (option)contact rating contact life 8A at 230V AC resistive load 1100,000 operations at rated load / 350,000 operations at 3ARelay (make)for type 703041contact rating contact life3A at 230VAC resistive load 2150,000 operations at rated load / 350,000 at 1A2.1A with devices certified to DIN EN 14597Relay (changeover) (option)contact rating contact life 3A at 230VAC resistive load350,000 operations at rated load / 900,000 operations at 1A Logic output0/12V / 30mA max. (sum of all output currents) or 0/18V / 25mA max. (sum of all output currents)Solid-state relay (option)contact ratingprotection circuitry The holding current of the triac is at least 50mA.1A at 230V varistorVoltage (option)output signals load resistance accuracy 0 — 10V / 2 — 10V R load ≥ 500Ω≤0.5%Current (option)output signals load resistance accuracy 0 — 20mA / 4 — 20mA R load ≤500Ω≤0.5%Supply voltage for 2-wire transmitterfor type 703042/43/44voltageelectrically isolated, not stabilized17V DC at 20mA load, 25V DC with no loadController type 2-state controller (factory setting),3-state controller, modulating controller, continuous controller Controller structures P , PD, PI, PIDA/D converter dynamic resolution up to 16-bitSampling time50msec, 90msec, 150msec, 250msec (factory setting: 250msec)Supply voltage (switchmode PSU)110—240V AC -15/+10%, 48—63Hz 20—30V AC/DC, 48—63HzElectrical safety to EN 60730overvoltage category III, pollution degree 2Power consumption Type 703041: max. 8VA; type 703042/43/44: max. 13VA Data backup EEPROMElectrical connectionat the back, via screw terminals,conductor cross-section up to 2.5mm 2with core ferrules (length: 10mm)Electromagnetic compatibility Interference emission Interference immunityEN 61326-1Class Bto industrial requirementsHousing type plastic housing for panel mounting to IEC 61554Depth behind panel90 mmAmbient/storage temperature range 0to 55°C /-30 to +70°CClimatic conditions rel. humidity ≤90% annual mean, no condensation Operating position horizontalProtection to EN 60529, front IP65 / back IP20Weight (fully fitted)Type 703041: approx. 220g Type 703042/43: approx. 380g Type 703044: approx. 490gDIN approved sensors for operation in airDIN approved sensors for operation in water and oillApprovals/marks of conformityModbusInterface type RS422/485Protocol Modbus, Modbus Integer Baud rate9600, 19200, 38400Device address0—255Max. number of nodes 32PROFIBUS Device address0—255Sensor typeTemperature range 11.This is the sensor temperature range. The approval of the device does only apply to the temperature ranges listed on page 4/10.Nom. length mm Process connection Resistance thermometers acc. to data sheet 90.2006 2 x Pt 100-170...+700°C 500, 700, 1000Sliding stop flange 2 x Pt 100-170...+700°C 500, 700, 1000Screwed pipe joint G1/2Thermocouplesacc. to data sheet 90.10062 x NiCr-Ni, type …K“-35...+800°C 500, 700, 1000Sliding stop flange2 x FeCuNi, type …L“-35...+700°C 500, 700, 10002 x NiCr-Ni, type …K“-35...+1000°C 250, 355, 5001 x Pt10Rh-Pt, type …S“0...1300°C 250, 355, 5002 x Pt10Rh-Pt, type …S“0...1300°C 250, 355, 5001 x Pt30Rh-Pt6Rh, type …B“600...1500°C 250, 355, 5002 x Pt30Rh-Pt6Rh, type …B“600...1500°C250, 355, 500Sensor typeTemperatur range 11.This is the sensor temperature range. The approval of the device does only apply to the temperature ranges listed on page 4/10.Fitting length mm Process connection Resistance thermometers acc. to data sheet 90.20061 x Pt 100-40...+400°C100Screw fitting G1/22 x Pt 1001002 x Pt 100-170...+550°C 65...670Screwed pipe joint G1/21 x Pt 10065...6701 x Pt 100-170...+480°C 250Screw fitting G1/22 x Pt 1002501 x Pt 100-40...+480°C 100, 160, 220Weld-in pocket 1 x Pt 100-40...+400°C 1902 x Pt 100-40...+400°C 1902 x Pt 100-40...+480°C 100, 160, 2203 x Pt 100-40...+400°C 100, 160, 2201 x Pt 100-170...+480°C 100, 160, 220Thermocouplesacc. to data sheet 90.10062 x NiCr-Ni, type …K“-35...+550°C 65...670Screwed pipe joint G1/21 x NiCr-Ni, type …K“65...6702 x FeCuNi, type …L“65...6701 x FeCuNi, type …L“65...6701 x Fe-CuNi, type …L“-35...+480°C 220Weld-in pocket2 x Fe-CuNi, type …L“220Mark of conformity Testing laboratory Certificates/certification numbersTest basis valid for DIN DIN CERTCO Register No. TR1187DIN EN 14597all typesDNV GL DNV GLTAA00001B3Class Guideline DNVGL-CG-0339703044/191-320-23/214, 062c UL usUnderwriters LaboratoriesE 201387UL 61010-1CAN/CSA-C22.2 No. 61010-1all typesConnection diagram, type 703041Terminal strip 2Terminal strip 1Terminal strip 3Connection diagram, type 703042/43/44Terminal strip 2Terminal strip 1Terminal strip 3DimensionsType 703041Type 703044Close mountingMinimum spacing of panel cut-outs Type horizontal vertical without setup connector:703041703042 (portrait format) 703043 (landscape fmt.) 70304411mm11mm30mm11mm30mm30mm11mm30mmwith setup connector (see arrow):703041703042 (portrait format) 703043 (landscape fmt.) 70304411mm11mm65mm11mm65mm65mm11mm65mmOrder detailsBasic type703041JUMO dTRON316, format 48mm x 48mmincl. 1 analog input, 2 relays and 2 logic inputs or 2 logic outputs703042JUMO dTRON308, format 48mm x 96mm (portrait format)incl. 1 analog and 2 logic inputs, 2 relays and 2 logic outputs703043JUMO dTRON308, format 96mm x 48mm (landscape format)incl. 1 analog and 2 logic inputs, 2 relays and 2 logic outputs703044JUMO dTRON304, format 96mm x 96mmincl. 1 analog and 2 logic inputs, 2 relays and 2 logic outputsBasic type extensions1Basic type 1Version8Standard, with factory settings9Programming to customer specificationLogic outputs (2 available as standard)10/12V20/18VType 703042/43/44Type 703041 (no option 3)123Option slots Max. number Max. number Option 1Option 2000not used X X111Analog input 2 (universal)11X X222Relay (changeover)21X-333 2 relays (make contact)21X-444Analog output22X X5552logic inputs21X X666Solid-state relay 1A22X X777RS422/485 interface11X X888Profibus-DP interface11X XX = available in this option slot, - = not available in this option slotSupply voltage23110 — 240V AC -15/+10%, 48 — 63Hz25AC/DC 20…30V, 48…63HzExtra codes000none214Math and logic module217Ratio controller (requirement: 2 analog inputs)218Differential controller (requirement: 2 analog inputs)219Humidity controller (requirement: 2 analog inputs)Approvals000none056DIN EN 14597dTRON 304 with DNV GL approval on request/1––/,703041/181–140–23/000,Scope of delivery:- 1 controller- 1 seal- mounting brackets- 1 operating manual (format DIN A6)A CD with demo setup software and PDF documents (operating manual and other documentation) can be ordered separately.Individual documents and programs can be downloaded at (a charge is made for enabling the software).。
儿童水果盒安全使用指南
儿童水果盒安全使用指南
1. 正确使用方法
- 仔细阅读产品说明,按照指示正确使用。
- 水果盒仅供装载干净、新鲜的水果和小零食,不可装载其他物品。
- 使用后及时清洗干净,保持水果盒内部清洁卫生。
2. 注意事项
- 避免儿童独自使用,应在成人的监督下使用。
- 检查水果盒有无破损,防止儿童受伤。
- 不可将水果盒投掷或当做玩具使用。
- 远离热源,不可将水果盒放入微波炉或烤箱内。
3. 安全存放
- 使用后将水果盒存放于干燥通风处。
- 避免阳光直射,远离化学品和腐蚀性物质。
- 定期检查清洁,确保水果盒保持清洁卫生。
4. 环保理念
- 尽量选择环保材质的水果盒,避免使用一次性塑料制品。
- 重复使用水果盒,减少浪费。
- 产品使用年限到期后,请按规定分类回收或妥善处理。
以上是儿童水果盒安全使用的一些基本指南,请谨遵安全使用说明,保护儿童的健康成长。
如有任何疑问,欢迎咨询专业人士。
橙子包装说明文字
橙子包装说明文字橙子是我公司主要的出口水果之一，也是我公司旗下主打产品。
我们这次出口橙子，外包装为美国卡特橙、澳洲纽荷尔橙、澳大利亚塔斯马尼亚橙三个品种。
包装材料是一个透明的纸箱，里面可以看到橙子的内部品质，以及里面橙子的外形。
在美国和澳洲生产的橙子袋都是用卡特橙作为包装材料。
在新西兰和日本产品也会用到这种包装形式。
产品包装盒外面再加上一层袋子，外面加上一层透明纸就可以了。
主要材质有: PP, ABS, PVC （聚氯乙烯）材料等。
1.橙子是高品质水果，要求在常温下保存2-3天。
在南方地区，如果是带皮的水果，最好不要放在阳光直射处，因为橙子在水果中最怕高温，在常温下保存时间最长则在2-3天以上。
需要注意的是在放入保鲜盒之前一定要将橙子放入冰箱里冷藏2-3天。
这样便于保鲜质量提高。
目前市面上一般会购买一些专门保存橙子的产品，其中新西兰橙和美国卡特橙是我公司最近推出的主打产品。
新西兰橙富含丰富的维生素和矿物质；卡特橙具有很高的营养价值与保健功能！纽荷尔橙富含维生素和矿物质；卡特橙果肉细腻光滑；纽荷尔橙中含有丰富的钾和镁；卡特橙可以很好地保护人体细胞；卡特橙含有维生素 A、 C、B2、B和 E;纽荷尔橙中含有大量水分、糖醋多汁；卡特橙中含有较多的粗纤维及果胶。
纽荷尔橙酸甜可口、富含维生素C和膳食纤维，能够促进消化；卡特汁有解酒功效，能促进酒精排出体内。
目前市场上卡特橙多糖含量比其他品种高10-20倍！对于减肥人群非常有帮助！2.新鲜橙子一般在25度左右储存，不能放冰箱。
如果橙子是放在冰箱里，需要保持室温在5度以下。
如果温度过高则会破坏橙子自身的呼吸作用。
长时间储存容易变坏。
存放期间应注意：不要将橙子放在阳光下暴晒。
放置时将橙子放在干燥、通风、避光、阴凉、避风、避免接触冷气的地方。
存放后的橙子不能立即食用。
3.冷藏状态的橙子必须保持清洁卫生，不能有异味。
在运输过程中要避免挤压、碰撞、搬运和其他碰撞等。
由于橙子对温度非常敏感，在运输过程中如果受到温度的变化很容易造成橙子品质变化，因此在运输过程中应做好防护措施：-保证运输过程中的橙子不被阳光直射影响品质；-包装盒要表面光滑无褶皱；-对于容易受污染和损伤部位应采用干净干燥处理；-严格遵守外包装消毒规定；-使用具有防霉防虫、防潮功能的食品级塑料袋。
箱唛资料翻译
箱唛资料翻译MGAOuter Carton - Main Panel X 2外箱 - 正唛(两面)Hint: Please see below.提示: 请参照下述Hint: Please show goods qty. of outer carton提示: 请显示外箱所装的产品数量Hint: If no inner packed, please print here as “---”提示: 若没有内箱，请在此栏印“---”Hint:Ifinnercartonispacked,pleaseprinthereinformatas“********************************* carton”. e.g. 2@6pcs = 2 inner cartons with 6 merchandises in each inner carton提示: 若有内箱，请依此形式印刷“内箱数量@内箱产品数量”。
例如: “2@6pcs.”, 即是有2个内箱, 而每个内箱有6件产品Hint: For solid pack, please print here “---”提示: 单款包装, 请印在这里“---”Hint: For assortment pack, please print here as like “no. of inner carton @ assortment break down in carton”. i.e. 2@1X269649 + 1X269663 + 2X269656 + 2X269670. If no inner, please print item breakdown only提示: 混合包装, 请印: “内箱数量@内箱的混装之分布” 。
例如: “2@1X269649 + 1X269663 + 2X269656 + 2X269670”。
若没有内箱, 则只填写混装的分布即可Hint: Customer PO#提示: 客户订单号Hint: Country of Origin. e.g. Made in China提示: 原产地。
水果盒1
货名：椭圆形冬枣盒 货名：水蜜桃盒盖底 货名：5个装奇异果盒 货名：6个装奇异果盒 尺寸：190*150*65 尺寸：290*210*90 尺寸：180*165*55 尺寸：195*105*65
货名：樱桃盒 货名：比利时鸭梨盒 货名：大号青提盒 货名：圣女果盒 尺寸：188*180*50 尺寸：180*180*55 尺寸：200*145*120 尺寸：150*120*80
货名：不知火果 货名：车厘子盒 货名：两个装大号苹果盒 货名：两个装苹果盒 尺寸：95*90*90 尺寸：150*120*80 尺寸：220*115*105 尺寸：245*140*100
货名：2个装奇异果盒 货名：6个装水蜜桃盒 货名：大号丰盛盒 货名：金英果盒 尺寸：145*110*55 尺寸：320*210*90 尺寸：200*175*95 尺寸：100*100*60
货名：三个装奇异果盒 货名：青提盒 货名：4个装大号苹果盒 货名：6个装橙子盒 尺寸：185*105*50 尺寸：205*120*130 尺寸：200*200*90 尺寸：280*205*85
货名：草莓盒 货名：草莓盒 货名：蓝莓盒 货名：车厘子 尺寸：104*96*78 尺寸：103*95*76 尺寸:90*90*34 尺寸：160*90*48。
Radnor和North品牌的一款首 aid 箱类产品说明书
Radnor® Bulk First Aid KitsAPart Number Description10 25 50 75 100SH40100501" x 3" Plastic Strip Bandages,100/bx1 1 111SH40101152" x 3" Adhesive Bandages, 50/bx- - - -1NOS0207302" x 3" Adhesive Bandages, 6/bx- - - 1-NOS020855Woven Fingertip Bandages, 8/bx- - - -1NOS020020Woven Knuckle Bandages, 8/bx- - 1 11SH40231431⁄2" x 5 yds Waterproof Adhesive Tape 1 1 1 1 2NOS0480061" x 5 yds Waterproof Adhesive Tape- - - 26SH40518202" Clean-Wrap N/S Gauze1 - - 22SH4103100T2PK 1" x 5 yd Co-Flex Bandage- - 5 -5SH4103200T 2" x 5 yd Co-Flex Bandage- 1 - 1-SH4103300T 3" x 5 yd Co-Flex Bandage- - - 12SH4103400T 4" x 5 yd Co-Flex Bandage- - - -2SH40675222" x 2" Sterile Gauze Pads, 25/bx- - - -13" x 3" 12ply Sterile Gauze Pads, each 4 5 10 - -SH40675333" x 3" Sterile Gauze Pads, 25/bx- - - 11SH40674444" x 4" Sterile Gauze Pads, 10/bx- - - -1NOS0207684" Off-Center Compress Bandage, 1/bx 1 1 1 2 3NOS020510Gauze Compress 24" x 72"11NOS045009Triangular Bandage, 40" x 40" x 56"1 1 1 12-Eye Pads,Oval Sterile, each2 2 - --NOS020300Eye Pads Sterile, 4/bx- - 1 22FEN320004510000 1 oz Eyewash NOS021645MD Antiseptic BZK Wipes, 10/bx1 1 1 22 1 1 1 12A. Radnor® General Purpose Bulk First Aid KitsSH4232124 SH4233020 SH4201005 NOS021020 SH4161510 NOS020667 NOS020555 NOS020225Triple Antibiotic Ointment .5 gm Foil Pk, ea 6 6 6 6 -Triple Antibiotic Ointment .5 gm Foil Pk, 20/bx - - - - 1Hydrocortisone (1%) 1 gm 1% Foil Pack,20/bx - - - - 1Alcohol Prep Pad, each- 4 - --3 oz Burn Spray- - - 111⁄8 oz Burn Gel, each6 6 6 --Aspirin, 50 packs of 2 per bx- - - 1141⁄2" x 5" Cold Pack, 1/bx1 1 2 24Pain-A-Rest (acetaminophen)13 pks of 2/bx - - 1 - -Ammonia Inhalant Ampules, each- 2 5 --Ammonia Inhalant Ampules, 10/bx- - - 11• Kits contain economic bulk supplies that can be readily accessedwhen needed• Ideal for manufacturing settings where a wide variety of first aid itemsare required• Image shown may vary from actual fill, see chart below for list of contents• All general purpose bulk kits are ANSI Z308.1-2009 compliantPart NumberDescriptionSizeRAD64058020 RAD64058008 RAD64058009 RAD64058010 RAD6405801110-person Cabinet 25-person Cabinet 50-person Cabinet 75-person Cabinet 100-person Cabinet107⁄16"W x 5"H x 21⁄2"D 101⁄2"W x 5"H x 21⁄2"D 101⁄2"W x 101⁄2"H x 21⁄2"D 151⁄2"W x 101⁄2"H x43⁄4"D 17"W x 15"H x 51⁄2"DSH480264RB 84" x 52" Rescue Blanket, Silver- - - 11NOS020380 NOS020350Wire Splint for Arm or Leg Tourniquet- - - 11 - - - 11BSH440709TM Tongue Blades, 6/pk- - - 11SH43271963" Tweezer, Slant End11NOS03156531⁄2" Tweezers, Pointed1 1 11SH432BS412 SH4325701P41⁄2" Mini Bandage Scissors 51⁄2" SS Lister Bandage Scissors1 1 1 11 - - - 11B. North® Redi-Care Kits™SH4522000VSH4269214-NOS045027Part Number NOS028001 NOS016059 NOS020010 NOS020020 NOS020701 NOS020795 NOS032074 NOS020445 NOS048006 NOS020125 NOS032203 NOS032204 NOS020766 NOS020640 NOS052220NOS121065 SH4241010A NOS126040F NOS020135 NOS045027 SH4324050 SH4067433 NOS021161 NOS020667 NOS021201X NOS020618 NOS752577 NOS720072 NOS021640 SH4065590 NOS020374 NOS020380Vinyl Gloves, 2pr/bg1 1 1 11Hand & Skin Lotion 1 gm Foil Pack, 20/bx - - - - 2Zip Lock Bag, 5" x 5"- 1 1 --First Aid Guide1 1 1 11Redi-Care Kit ComponentsContents018503-4219 PromotionalAdhesive Bandage, 1" x 3", Cloth10Adhesive Bandage, 1" x 3", Cloth-Adhesive Bandage, Fingertip, Cloth 2Adhesive Bandage, Knuckle, Cloth 2Adhesive Bandage, 1" x 3", Plastic -Adhesive Bandage, 1" x 3", Plastic -Adhesive Bandage, XL2Adhesive Tape, 1⁄2" x 21⁄2 yd.1Adhesive Tape, 1" x 5 yd.-Antibiotic Ointment4Antiseptic Spray, 2 oz.-Burn Relief Spray, 2 oz.-Compress, Bandage, Offset, 2"-Compress, Gauze, 18" x 36"-Conforming Bandage, 2” x 6 yds,-non-sterileCPR Barrier-Eye Pad, Sterile-Eye-Lert® Eyewash, 4 oz.-First Aid/Burn Cream with Aloe4First Aid Guide-Tweezers, Disposable Plastic1Gauze Pads, Sterile 3" x 3"2Hydrocortisone,1.0%,⁄132oz.-Instant Cold Pak1PVP Iodine Wipes6Rescue Blanket-Scissors, Angled, Red Handle1Self Adherent Wrap, 3" x 5 yd.-Nitrile Medical Gloves (pair)1Trauma Pad, Sterile, 5" x 9"-Triangular Bandage, Non-Sterile-Wire Splint-018502-4220 Small 4 4 1 4 1 1 -6 1 1 4 1 10 1 1 1 -018501-4221 018505-4221 Medium Medium w/CPR----44443232--4411--11------2111-1221166111144--111010--11--22--11--018500-4222 018504-4222 Large Large w/CPR--11004466----441111111111141122-14411--1111101011022101011111112111111• Lightweight, portable first aid kits packaged in soft-sided, red nylon bags• The flexibility of these soft-sided cases allows them to easily fit into tight spaces, and hold more items than hard-sided kits of the same size• Complete contents for each kit are listed in chart belowPart Number NOS018500-4222 NOS018504-4222 NOS018501-4221 NOS018505-4221NOS018502-4220 NOS018503-4219DescriptionSizeLarge Kit with CarryingHandle for Portability186 pieces per unit101⁄2" x 7" x 6"Large Kit with CPR Barrier,Carrying Handlefor Portability,187 pieces per unit101⁄2" x 7" x 6"Medium Kit with CarryingHandles and Belt Loopsfor Portability,91 pieces per unit83⁄4" x 6" x 23⁄4"Medium Kit with CPRBarrier, CarryingHandles and Belt Loopsfor Portability,92 pieces per unit83⁄4" x 6" x 23⁄4"Small Kit with Integral BeltLoops, Compact Design,61 pieces per unit43⁄4" x 5" x 21⁄2"Promotional Kit, flat, withTrim Design39 pieces per unit7" x 41⁄2" x 11⁄2"。
国外果蔬精品包装分析
•
9、一个人即使已登上顶峰，也仍要自 强不息 。上午 1时8分 10秒上 午1时8 分01:0 8:1022. 3.24
• 10、你要做多大的事情，就该承受多大的压力。3/24/2
022 1:08:10 AM01:08:102022/3/24
• 11、自己要先看得起自己，别人才会看得起你。3/24/2
把用保鲜膜包装好的无核黄瓜放进纤维 盘内，箱子上有已经印好的贮藏指导。
选择了最好的番茄，每个番茄都用泡沫 纸隔开，避免互相擦伤。
在经过压缩和上蜡过的纤维 盒内垂直地包装着芦笋，箱 子的小孔是用来通风透气的， 在箱子底下有一片防潮垫。
角瓜是用压缩 的纸箱包装的， 每个角瓜被间 隔开并用碎纸 保护，这是为 了不相互擦伤。
箱包装，内的16 个香甜爽口的梨 是送给亲朋好友
或是作为商务礼品的最佳选择。
特 别 的 礼 物------柑橙桔包装
外用纸箱，内 用塑料箱包装, 双层加固 （三层装）
网袋包装 小铁篮包装的桔子别有一番风味
用板条箱包装的桔子，既坚实又牢固，这种板条箱蔬菜包 括豆、茄子、胡椒粉和南瓜等
外用纸箱包装，内 每个木瓜都采用了 泡沫网，这可以避 免相互擦伤。
大 蒜 包 装 赏 析
用礼品四轮马车
包装的大蒜，它
非常实用和便利，
包括了非常独特
的亮丽的木制板
条箱；外表美观
的特大的大蒜；
可用来储藏大蒜
（礼品装）
的赤土色陶器；处方和罐盖下的大手帕，另外还
赠送一里的大蒜是 用木制板条箱 包装的，方法 独特，板条箱 是用钉子钉牢 ，然后用铁丝 网住，每条板 之间留有空隙 是为了让大蒜 能通风透气。
谢 谢 大 家 022 1:08 AM3/24/2022 1:08 AM22.3.2422.3.24
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
• 各国水果的等级、规格…等划分方式不尽相同，我们必须 分别了解。 • 特殊品种或许只有在当地国家才有，对于大众消费者甚至 采购都是陌生的。 • 目前国家对于进口水果的审核标准不是很清楚。 • 越了解进口水果，我们将会... --争取到最佳的原产地、商品等级、价格。 --给与消费者更清楚推荐 --得到更好的销售和利润
百菌清 倍硫磷 苯丁锡 草甘膦 除虫脲 代森锰锌 滴滴涕 1 0.05 5 0.1 1 3 0.1 对硫磷 多菌灵 二嗪磷 氟氰戊菊酯 甲拌磷 甲萘威 甲霜灵 不得检出 0.5 0.5 0.5 不得检出 2.5 六六六 氟氯氰菊酯 氯菊酯 氰戊菊酯 炔螨特 噻螨酮 0,1 0,2 2 0.2 5(梨果类) 0.2 双甲脒 四螨嗪 辛硫磷 溴氰菊酯 亚胺硫磷 异菌脲 0.5(梨果类) 1 0.05 0.1 0.5 0.5 10(梨果类)
1
进口水果外箱的主要信息
• 品名、产地、品种、等级、规格、尺寸、重量以及产地或种 植地的相关信息。
进口水果的主打ITEM
目前，店内进口水果一般包含：榴莲、山竹、火龙果、龙眼、 红提、青提、黑提、车厘子、新奇士橙、奇异果（金果、绿 果）、加力果、青苹果、华盛顿苹果等
2
国家标准
• 经国家质检总局批准，广州、厦门、上海、天津、青岛、南京、宁波七大 口岸，列为进口水果指定入境口岸。 • 目前,我国已制定了79种农药在32种(类)农副产品中农药最高残留限量的国 家标准。其中有关水果农药残留最高限量的新标准,每公斤应少于或等于 毫克数为: • 每公斤应少于或等于毫克数为:
品牌：狗熊
规格：10行
品种：BING
产地：美国
美国新奇士橙
品种：脐橙
数量：88粒
品牌：SunKist
新西兰奇异果
采摘之后，含加 工、包装、运输 等信息的可溯源 编号
等级：1级 品种：海华德 装箱数量：粒 数
Ground Recording and Monitoring System 土地记录监控系统
产地:新西兰
尺寸:36
种植者编号
采摘之前的可溯 源编号
系列号
14
鲜食发展团队 Fresh Development Team
新西兰金奇异果
品牌：ZESPRI
品种：园艺16
产地：新西兰
数量：64
尺寸：36
ML表示大箱包装 I T 表示小箱包装
品牌
包装出口商 邮箱及网址
可追溯性条 码
级别
粒数
品种:嘎啦
品牌：正
红提-美国
品牌:PRIMX
品种:红地球
产地：美国 净重：18磅
红提-智利
品牌：KINGO
规格：L
品种：红地球 箱装：ZIP 净重：8.2KG
产地：智利
青提-南非
品种：月球
尺寸：XL
净重：4.5KG
产地：南非
南非黑提 品牌： CAPE 尺寸：XL 净重：4.5KG
产地：南非
车厘子-美国
0.5(梨果类) 甲胺磷
1(小粒水果) 三唑酮
敌百虫
毒死蜱
0.1
1
抗蚜威
克菌丹
2.5
15
三唑锡
杀螟硫磷
3
2(梨果类)
0.5
敌敌畏
马拉硫磷
0.2
不得检出
榴莲-泰国
品牌：正字
产地：泰国
品种：金枕
净重：19KG
山竹-泰国
品牌:大拇指
内包装
火龙果-越南
品名：火龙果 品牌：福寿
规格：17粒
产地：越南
龙眼-泰国
包装时间
农场编号
包装箱编号
美国加力果
品牌:majestie
产 WHIZ
粒数：113
产地：美国
华盛顿苹果-美国
产地：华盛顿
品牌:MANSON
粒数:88粒/箱
谢谢