LC-Aw50
艾茨顿199034产品说明说明书
Eaton 199034Eaton Moeller® series Rapid Link - Speed controllers, 8.5 A, 4 kW, Sensor input 4, Actuator output 2, 230/277 V AC, PROFINET, HAN Q4/2, with braking resistance, with fanGeneral specificationsEaton Moeller® series Rapid Link Speed controller199034195 mm270 mm 220 mm 3.65 kgUL 61800-5-1 IEC/EN 61800-5-1 UL approval RoHS CERASP5-8422PNT-4120101S1Product NameCatalog NumberProduct Length/Depth Product Height Product Width Product Weight Certifications Catalog Notes Model Code3 fixed speeds and 1 potentiometer speedcan be switched over from U/f to (vector) speed control Connection of supply voltage via adapter cable on round or flexible busbar junction480 VIs the panel builder's responsibility. The specifications for the switchgear must be observed.400 V AC, 3-phase480 V AC, 3-phaseMeets the product standard's requirements.4 kW500 VMeets the product standard's requirements.-40 °C380 VThermo-click with safe isolationBraking resistance2 Actuator outputsIGBT inverterKey switch position AUTOPC connectionKey switch position HANDSelector switch (Positions: REV - OFF - FWD)FanKey switch position OFF/RESETPTC thermistor monitoringControl unitInternal DC linkBreaking resistanceTwo sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operation0 Hz Generation change from RA-SP to RASP 4.0Generation change RAMO4 to RAMO5Generation change from RA-MO to RAMO 4.0Configuration to Rockwell PLC for Rapid LinkGeneration Change RA-SP to RASP5Generation Change RASP4 to RASP5Rapid Link 5 - brochureDA-SW-USB Driver DX-COM-STICK3-KITDA-SW-USB Driver PC Cable DX-CBL-PC-1M5DA-SW-Driver DX-CBL-PC-3M0DA-SW-drivesConnect - installation helpDA-SW-drivesConnect - InstallationshilfeDA-SW-drivesConnectMaterial handling applications - airports, warehouses and intra-logistics ETN.RASP5-8422PNT-4120101S1.edzIL034093ZUramo5_v36.dwgrasp5_v36.stpDA-DC-00003964.pdfDA-DC-00004184.pdfDA-DC-00004514.pdfDA-DC-00004508.pdfeaton-bus-adapter-rapidlink-speed-controller-dimensions-002.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions-003.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions.epseaton-bus-adapter-rapidlink-speed-controller-dimensions-004.epsMains voltage - max10.11 Short-circuit ratingRated operational voltage10.4 Clearances and creepage distancesOutput at quadratic load at rated output voltage - max Output voltage - max10.2.3.1 Verification of thermal stability of enclosures Ambient storage temperature - minMains voltage - minFitted with:Output frequency - min Applikasjonsmerknader BrosjyrereCAD model Installeringsinstruksjoner mCAD model SertifiseringsrapporterTegningerStarting current - max200 %, IH, max. starting current (High Overload), For 2 seconds every 20 seconds, Power sectionRated conditional short-circuit current (Iq)10 kAAmbient operating temperature - max40 °CCommunication interfacePROFINET, optionalAssigned motor power at 115/120 V, 60 Hz, 1-phase5 HPOutput frequency - max500 HzSwitching frequency8 kHz, 4 - 32 kHz adjustable, fPWM, Power section, Main circuitFeaturesParameterization: drivesConnect mobile (App) Parameterization: FieldbusInternal and on heat sink, temperature-controlled Fan Parameterization: drivesConnectParameterization: KeypadAmbient operating temperature - min-10 °CBraking current≤ 0.6 A (max. 6 A for 120 ms), Actuator for external motor brakeNumber of HW-interfaces (serial TTY)10.6 Incorporation of switching devices and componentsDoes not apply, since the entire switchgear needs to be evaluated.Nominal output current I2N8.5 A10.2.6 Mechanical impactDoes not apply, since the entire switchgear needs to be evaluated.10.3 Degree of protection of assembliesDoes not apply, since the entire switchgear needs to be evaluated.Product categorySpeed controllerRadio interference classC2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.C1: for conducted emissions onlyHeat dissipation capacity Pdiss0 WRated control voltage (Uc)230/277 V AC (external brake 50/60 Hz)24 V DC (-15 %/+20 %, external via AS-Interface® plug)Assigned motor power at 460/480 V, 60 Hz, 3-phase5 HPNumber of HW-interfaces (RS-422)Mains current distortion120 %ProtocolPROFINET IO10.9.2 Power-frequency electric strengthIs the panel builder's responsibility.Overvoltage categoryIIIDegree of protectionIP65NEMA 12Ambient storage temperature - max70 °CRated impulse withstand voltage (Uimp)2000 VConnectionPlug type: HAN Q4/2Overload currentFor 60 s every 600 sAt 40 °CFunctionsFor actuation of motors with mechanical brake3 fixed speeds1 potentiometer speedBrake chopper with braking resistance for dynamic braking4-quadrant operation possibleOutput at linear load at rated output voltage - max4 kWMains voltage tolerance380 - 480 V (-10 %/+10 %, at 50/60 Hz)Leakage current at ground IPE - max3.5 mAConverter typeU converter10.2.2 Corrosion resistanceMeets the product standard's requirements.Supply frequency50/60 Hz10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard's requirements.10.2.7 InscriptionsMeets the product standard's requirements.Shock resistance15 g, Mechanical, According to IEC/EN 60068-2-27, 11 ms, Half-sinusoidal shock 11 ms, 1000 shocks per shaftApplication in domestic and commercial area permittedYesNumber of inputs (analog)Number of phases (output)310.12 Electromagnetic compatibilityIs the panel builder's responsibility. The specifications for the switchgear must be observed.10.2.5 LiftingDoes not apply, since the entire switchgear needs to be evaluated.Number of HW-interfaces (RS-485)1Number of HW-interfaces (industrial ethernet)Efficiency98 % (η)System configuration typePhase-earthed AC supply systems are not permitted.AC voltageCenter-point earthed star network (TN-S network)10.8 Connections for external conductorsIs the panel builder's responsibility.Switch-on threshold for the braking transistor765 VDCProtectionFinger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)Braking voltage230/277 V AC -15 % / +10 %, Actuator for external motor brakeApplication in industrial area permittedYesClimatic proofingIn accordance with IEC/EN 50178< 95 %, no condensation10.9.3 Impulse withstand voltageIs the panel builder's responsibility.Overload current IL at 150% overload12.7 AInput current ILN at 150% overload7.8 ANumber of HW-interfaces (RS-232)Number of inputs (digital)4Current limitationAdjustable, motor, main circuit0.8 - 8.5 A, motor, main circuitCable lengthC3 ≤ 25 m, maximum motor cable lengthC1 ≤ 1 m, maximum motor cable lengthC2 ≤ 5 m, maximum motor cable length10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to beevaluated.Mounting positionVerticalMains switch-on frequencyMaximum of one time every 60 seconds10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.10.9.4 Testing of enclosures made of insulating materialIs the panel builder's responsibility.Heat dissipation per pole, current-dependent Pvid0 WElectromagnetic compatibility1st and 2nd environments (according to EN 61800-3)Resolution0.1 Hz (Frequency resolution, setpoint value)Assigned motor power at 460/480 V, 60 Hz5 HPRelative symmetric net voltage tolerance10 %Rated operational current (Ie)8.5 A at 150% overload (at an operating frequency of 8 kHz and an ambient air temperature of +40 °C)Number of outputs (analog)Rated operational power at 380/400 V, 50 Hz, 3-phase4 kWNumber of HW-interfaces (USB)Operating modeSensorless vector control (SLV)PM and LSPM motorsSynchronous reluctance motorsBLDC motorsU/f controlRated frequency - min45 HzDelay time< 10 ms, On-delay< 10 ms, Off-delayNumber of outputs (digital)2Power consumption95 W10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard's requirements.10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effectsMeets the product standard's requirements.Number of HW-interfaces (other)Rated frequency - max66 HzVibrationResistance: According to IEC/EN 60068-2-6Resistance: 6 Hz, Amplitude 0.15 mmResistance: 10 - 150 Hz, Oscillation frequency Resistance: 57 Hz, Amplitude transition frequency on accelerationShort-circuit protection (external output circuits)Type 1 coordination via the power bus' feeder unit, Main circuit10.7 Internal electrical circuits and connectionsIs the panel builder's responsibility.Braking torque≤ 30 % (I/Ie)Adjustable to 100 % (I/Ie), DC - Main circuitRelative symmetric net frequency tolerance10 %10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Number of HW-interfaces (parallel)Assigned motor power at 230/240 V, 60 Hz, 1-phase5 HPInterfacesNumber of slave addresses: 31 (AS-Interface®)Eaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. Med enerett.Eaton is a registered trademark.All other trademarks are property of their respectiveowners./socialmediaMax. total power consumption from AS-Interface® power supply unit (30 V): 250 mASpecification: S-7.4 (AS-Interface®)351.6 W at 25% current and 0% speed 53.8 W at 25% current and 50% speed 60.9 W at 50% current and 0% speed 64 W at 50% current and 90% speed 65.4 W at 50% current and 50% speed 85.1 W at 100% current and 0% speed 94 W at 100% current and 50% speed 95.3 W at 100% current and 90% speed 2Max. 2000 mAbove 1000 m with 1 % performance reduction per 100 mNumber of phases (input)Heat dissipation at current/speed Number of interfaces (PROFINET)Altitude。
AWCCA-50N50 无线充电电磁圈集装器说明书
• Durable construction
• Mobile Phones & Charging Accessories
• RoHS / RoHS II Compliant & Pb free.
• Power Supplies
NRND STANDARD SPECIFICATIONS
Maximum Ratings
Wireless Charging Coil Assembly
AWCCA-50N50
Pb RoHS / RoHS II Compliant
Moisture Sensitivity LevelEATURES:
APPLICATIONS:
• Wireless Charging Coil for Transmitter or Receiver applications, • Automotive Industry (in car charging)
5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 LLC For terms and conditions of sales, please visit:
REVISED: 08-2-19
Q-Factor
160±30% 72±30% 165±30% 72±30% 163±30% 75±30%
Current Rating (rms)
5.4A Tpy. 10.6A Tpy. 5.7A Tpy. 11.1A Tpy. 5.7A Tpy. 10.6A Tpy.
Saturated Current
Part Number
AWCCA50N50H35-C01-B
AVALON V-Five 纯类A高压信号放大器说明书
Maximum input of +28dB or +38dB with the PAD.
5 PAD switch:
The PAD switch adds a resistive attenuator to ALL inputs.
LINE INSTRUMENT - DI MICROPHONE Hi-Z MICROPHONE Lo-Z
-24 10
100
1kHz
10k 20k
5 acoustic and electric instruments
-24 10
100
1kHz
10k 20k
6 electric and bass guitar
+6
+6
B
0dB
-6
-6
-24 10
100
1kHz
10k 20k
AIR-LIFT vocals, acoustic-electric instruments
+6
+6
0dB
0dB
-6
-6
-24 10
100
1kHz
10k 20k
vocals and instruments, high pass, rumble filter 50Hz @ 6dB/octave
-24 10
100
1kHz
10k 20k
vocals and instruments, high pass, rumble filter 90Hz @ 6dB/octave
AVA LON
Pure Class A
V55 V-Fifty Five
DI-RE-PREAMPLIFIER
南阳卧龙综合保税区信息化建筑项目(二)主设备清单
南阳卧龙综合保税区信息化建设项目（二）主设备清单一、主卡口部分主要设备清单1 电子车牌识别器电子车牌识别器霍克威尔深圳型号：L5111；工作频率：ISM 920～925MHz（中国）/902～928MHz（FCCPart 15）/865.6～867.5MHz（欧盟） /其他；识别距离：8～10 米（跟标签有关）；通信接口：RS485；支持标签协议：EPCC1 Gen（ISO18000-6C），ISO18000-6B；识别率：≥99.9%；电源输入：直流12V/3A；工作温度：-20～70℃；型号：L5111；工作频率：ISM 920～925MHz（中国）/902～928MHz（FCCPart 15）/865.6～867.5MHz（欧盟） /其他；识别距离：8～10 米（跟标签有关）；通信接口：RS485；支持标签协议：EPCC1 Gen（ISO18000-6C），ISO18000-6B；识别率：≥99.9%；电源输入：直流12V/3A；工作温度：-20～70℃；套102,839.0028,390.02 电子车牌识别标签电子车牌识别标签航通定制深圳型号：TA-82符合海关总署标准(陶瓷型)工作温度：-10°C to60°C存储温度:-10°C to60°C防护等级:IP-67协议:ISO-18000-6B/6C容量:64-512bits频段:UHF型号：TA-82符合海关总署标准(陶瓷型)工作温度：-10°C to60°C存储温度:-10°C to60°C防护等级:IP-67协议:ISO-18000-6B/6C容量:64-512bits频段:UHF张 544.00220.00三、地磅采集系统1 电子地磅及配/附件电子地磅及配/附件金钟济南型号：ZCS-120-3418额定称量:120吨；传感器；数字称重传感器；最大安全过载：125%FS；允许通过的汽车轴载：40吨；分度值：20千克；最小秤量：20e；精度：OIML III级；台面尺寸：18m(L)×3.4m(W)；秤台结构形式：三段全钢U型梁结构,秤台刚性；材质：Q235优质材料；秤台刚性：1/1000；安全系数：≥2.5；精度:OIML III级；基础形式：无基坑、浅基坑；秤台结构设计增强：秤体连接处加强设计，满足高频次，耐磨损的恶劣使用要求；秤台防护等级：室外工作，防护等级IP68；电源：220VAC(－15％～＋10％),50Hz±2％；环境工作温度：秤台-30 ～ +70℃；仪表-10℃～+50℃；型号：ZCS-120-3418额定称量:120吨；传感器；数字称重传感器；最大安全过载：125%FS；允许通过的汽车轴载：40吨；分度值：20千克；最小秤量：20e；精度：OIML III级；台面尺寸：18m(L)×3.4m(W)；秤台结构形式：三段全钢U型梁结构,秤台刚性；材质：Q235优质材料；秤台刚性：1/1000；安全系数：≥2.5；精度:OIML III级；基础形式：无基坑、浅基坑；秤台结构设计增强：秤体连接处加强设计，满足高频次，耐磨损的恶劣使用要求；秤台防护等级：室外工作，防护等级IP68；电源：220VAC(－15％～＋10％),50Hz±2％；环境工作温度：秤台-30 ～ +70℃；仪表-10℃～+50℃；套 6221,819.01,330,914.00四、IC卡自动识别系统1 双天线IC卡读写器(含电源）双天线IC卡读写器(含电源）明华澳汉深圳型号：RF-HW-R041-HT；工作频率：13.56MHz；传输速率：9600bps～115200bps；速率：106kbit/s、212kbit/s、424kbit/s；支持的协议：ISO/IEC 14443 TypeA&B、T=CL；系统接口：RS232；数据格式：1bit起始位，8bits数据位，1bit停止位，无奇偶校验，数据包CRC校验；读写距离：0～100mm；读写速度：12ms；识别率：≥99%；电源：DC 12V；型号：RF-HW-R041-HT；工作频率：13.56MHz；传输速率：9600bps～115200bps；速率：106kbit/s、212kbit/s、424kbit/s；支持的协议：ISO/IEC 14443 TypeA&B、T=CL；系统接口：RS232；数据格式：1bit起始位，8bits数据位，1bit停止位，无奇偶校验，数据包CRC校验；读写距离：0～100mm；读写速度：12ms；识别率：≥99%；电源：DC 12V；台141,561.0021,854.02 自动发卡机（含电源）自动发卡机（含电源）四维深圳型号：CMDS2210；带硬件看门狗；发卡速度：最快小于0.5秒；卡片适应性：纸质卡片或聚脂类卡片；76～86mm(长)，53～56mm(宽)，0.6～2.0mm(厚度)；卡箱容量：200 张(卡厚0.76mm),可级联；使用寿命：≥500万次；通讯接口：RS485、RS232、I/O电平；抗震性符合GB/T2423.5-1995 GB/T2423.5-1995 第二部分相关要求；型号：CMDS2210；带硬件看门狗；发卡速度：最快小于0.5秒；卡片适应性：纸质卡片或聚脂类卡片；76～86mm(长)，53～56mm(宽)，0.6～2.0mm(厚度)；卡箱容量：200 张(卡厚0.76mm),可级联；使用寿命：≥500万次；通讯接口：RS485、RS232、I/O电平；抗震性符合GB/T2423.5-1995 GB/T2423.5-1995 第二部分相关要求；台71,633.0011,431.0抗电磁干扰、防静电：符合3C 标准；电源：DC24V±10% 2A；功率：小于50W；工作温度：-25°C－+70°C；湿度：10%－95%（无冷凝）；尺寸：256×100×244mm（长×宽×高）；抗电磁干扰、防静电：符合3C 标准；电源：DC24V±10% 2A；功率：小于50W；工作温度：-25°C－+70°C；湿度：10%－95%（无冷凝）；尺寸：256×100×244mm（长×宽×高）；3 自动收卡机（含电源）自动收卡机（含电源）四维深圳型号：CM-RV1110；带硬件看门狗；发卡速度：最快小于0.5秒；卡片适应性：纸质卡片或聚脂类卡片；76～86mm(长)，53～56mm(宽)，0.2～2.0mm(厚度)；卡箱容量：70 张；卡箱底部可拆卸、扩充容量；使用寿命：＞500万次；通讯接口：RS485、RS232、I/O电平；抗震性符合GB/T2423.5-1995 GB/T2423.5-1995 第二部分相关要求；抗电磁干扰、防静电：符合3C 标准；电源：DC24V±10%2A；功率：小于50W；工作温度：-25°C－+70°C；湿度：10%－95%（无冷凝）；尺寸：252×76×98mm（长×宽×高）；型号：CM-RV1110；带硬件看门狗；发卡速度：最快小于0.5秒；卡片适应性：纸质卡片或聚脂类卡片；76～86mm(长)，53～56mm(宽)，0.2～2.0mm(厚度)；卡箱容量：70 张；卡箱底部可拆卸、扩充容量；使用寿命：＞500万次；通讯接口：RS485、RS232、I/O电平；抗震性符合GB/T2423.5-1995 GB/T2423.5-1995 第二部分相关要求；抗电磁干扰、防静电：符合3C 标准；电源：DC24V±10%2A；功率：小于50W；工作温度：-25°C－+70°C；湿度：10%－95%（无冷凝）；尺寸：252×76×98mm（长×宽×高）；台71,065.007,455.00五、闸口放行控制系统1 LED屏（含电源）LED屏（含电源）丰利源深圳型号：定制；户外6字节信息显示专用；单屏显示：1×6字，单红色（波长：635～645nm）；亮度：不小于1200mcd；视角：上下左右120度；串口：标准RS232C，速率9600；电源：DC 5V/3A；工作温度：-30℃～65℃；型号：定制；户外6字节信息显示专用；单屏显示：1×6字，单红色（波长：635～645nm）；亮度：不小于1200mcd；视角：上下左右120度；串口：标准RS232C，速率9600；电源：DC 5V/3A；工作温度：-30℃～65℃；套121,065.0012,780.02 电子栏杆（含车检器、红绿灯、手控盒、遥控器）电子栏杆（含车检器、红绿灯、手控盒、遥控器）德亚苏州型号：L14F；★栏杆臂：高强度铝合金材料；栏杆长度：3.0～4.0米；★起落时间：≤ 1.4秒；电机：交流力矩电机；使用寿命：1000万次；MTTR：小于0.5小时；MTBF：大于500万次；电源：AC 220V～240V/50Hz；功率：待机≤60W，运行≤250W；工作环境温度范围：-40℃～75℃；工作环境湿度范围：≤ 95%；★防砸安全保护功能：栏杆在降落过程中，如果感应线圈检测到车辆存在时，会迅速抬起至竖直状态，车辆通过后重新下落，以防止损坏车辆。
罗克韦尔自动化-2080-um002_-zh-e.pdf-Micro830、Micro850 和 M
Micro830、Micro850 和 Micro870可编程控制器Micro810 控制器产品目录号 2080-LC10-12AWA、2080-LC10-12QWB、2080-LC10-12DWD、2080-LC10-12QBBMicro820 控制器产品目录号 2080-LC20-20AWB、2080-LC20-20AWBR、2080-LC20-20QWB、2080-LC20-20QWBR、2080-LC20-20QBB、2080-LC20-20QBBRMicro830 控制器产品目录号 2080-LC30-10QWB、2080-LC30-10QVB、2080-LC30-16AWB、2080-LC30-16QWB、2080-LC30-16QVB、2080-LC30-24QWB、2080-LC30-24QVB、2080-LC30-24QBB、2080-LC30-48AWB、2080-LC30-48QWB、2080-LC30-48QVB、2080-LC30-48QBBMicro850 控制器产品目录号 2080-LC50-24AWB、2080-L50E-24AWB、2080-LC50-24QWB、2080-L50E-24QWB、2080-LC50-24QVB、2080-L50E-24QVB、2080-LC50-24QBB、2080-L50E-24QBB、2080-LC50-48AWB、2080-L50E-48AWB、2080-LC50-48QWB、2080-L50E-48QWB、2080-LC50-48QWBK、2080-L50E-48QWBK、2080-LC50-48QVB、2080-L50E-48QVB、2080-LC50-48QBB、2080-L50E-48QBBMicro870 控制器产品目录号 2080-LC70-24AWB、2080-L70E-24AWB、2080-LC70-24QWB、2080-L70E-24QWB、2080-LC70-24QWBK、2080-L70E-24QWBK、2080-L70E-24QWBN、2080-LC70-24QBB、2080-L70E-24QBB、2080-LC70-24QBBK、2080-L70E-24QBBK、2080-L70E-24QBBN2罗克⻙尔⾃动化出版物2080-UM002M-ZH-E - 2022 年4 月Micro830、Micro850 和 Micro870 可编程控制器⽤⼾⼿册重要⽤⼾须知在安装、配置、操作或维护本产品之前，请阅读本文档以及“其他资源”章节所列的文档，了解关于安装、配置和操作该设备的信息。
爱德华斯信号设备-视觉信号灯系列说明书
V I S U A L S I G N A L S1AC voltage frequency is 50/60 Hz2Calculated at operating power to 75% efficiency.NOTE: Mounting options notincluded (ordered separately)Edwards 116DEXMST-FJ and 116EXMST Series Xenon strobe beacons are explosionproof, signaling devices suitable for use in hazardous indoor or outdoor applications requiring NEMA Type 3R or 4X installations. The housing is cast aluminum with a corrosion resistance epoxy powder coat, and includes a dome guard. The fluted, high-impact glass dome provides even light distribution.The 116DEXMST-FJ Series is Diode Polarized for use in electrically supervised circuits. Both versions can be bracket, ceiling, pendant or stanchion mounted.Features and Specifications• Xenon strobe light source • Flash rate 65 fpm• High impact glass dome, dome guard included • Quick connect for easy assembly and installation• Diode Polarized for use in electrically supervised circuits (116DEXMST-FJ Series only)• Suitable for indoor and outdoor hazardous applications • B racket, ceiling, pendant or stanchion mountingoptions (ordered separately)• NEMA Type 3R and 4X enclosure • E xplosionproof: Class I, Div 2, Groups A and B, Class I, Div 1 and 2, Groups C and D; Class II and III, Div 1, Groups E, F and G; Class II andIII, Div 2, Groups F and G1Stanchion 116EX-SPendant 116EX-P3/4" Conduit EntryCeiling/Wall 116EX-C (4) 3/4" HubCeiling/Wall 116EX-C (4) 3/4" HubsWall BracketElbow 116EX-B116DEXSTM-FJ Series116EXMST-N5 Series*Letter in this position designates lens color: A - amber, B - blue, C - clear, G - green, M - magenta, or R - redV I S U A L S I G N A L S1Stanchion Mount116EX-Sdr_vs_explodeproof_wallMt_01.epsCeiling Mount 116EX-Cdr_vs_explodeproof_ceilingMt_01.eps6 3/4"4"Pendant Mount116EX-P。
爱立智SPSC503VEAXX2F电源防御SB双标准5000A，100 kA，3-杆固定，PXR20
Eaton SPSC503VEAXX2FEaton Power Defense SB, Double Standard, 5000 A, 100 kA, 3-Pole, Fixed, PXR20LSIGAM, C503VEAXX2FGeneral specificationsEaton Magnum low voltage power circuitbreakerSPSC503VEAXX2F78668976778516.3 in16.8 in31.1 in237 lbCCC Marked NEMA Compliant CE Marked SABA Listed Lloyd's Register Certified KEMA CertifiedANSIDNV GL CertifiedCSA CertifiedABS CertifiedUL ListedProduct Name Catalog NumberUPCProduct Length/Depth Product Height Product Width Product Weight Compliances Certifications5000 AUL 891StandardThree-polePower Defense SB UL 891 Standard Magnum PXR20Fixed Three-pole5000 A 600 VAC Fixed 100 kA100 kA 5000 A 5000 A 600 VAC Zone selective interlocking application paperMagnum circuit breakers with Power Xpert Release trip units product aid Selevctive coordination application paper - IA0120000E3Magnum PXR and PD-SB standard and narrow frame UL Certificate of ComplianceMagnum PXR and PD-SB double and double narrow frame UL Certificate of ComplianceAmperage Rating Application FrameNumber of poles Type Application FrameSeriesTrip TypeMounting Method Number of polesRated uninterrupted current (Iu) Voltage rating Mounting Method Interrupt ratingInterrupt ratingAmperage RatingRated uninterrupted current (Iu) Voltage rating Application notes Brochures Catalogs Certification reportsEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaPower Xpert Release trip unit for Magnum PXR circuit breakers PXR 20/25 user manualMagnum PXR low voltage power circuit breakers user manual Microsoft Word - Power Xpert Protection Manager Quick Start Guide.docxPower Xpert Protection Manager x64 22.6 1 Power Xpert Protection Manager x32 22.06 1 Eaton Specification Sheet - SPSC503VEAXX2F Low voltage circuit breakers guide spec Magnum PXR 20/25 electronic trip units time current curves Molded case and low-voltage power circuit breaker health Safer by design: arc energy reduction techniques Cyber security white paperManuals and user guidesSoftware, firmware, and applications Specifications and datasheetsTime/current curvesWhite papers。
航盛维修手册统一版
上海航盛实业有限公司售后服务部
上海航盛维修指导手册
所有权声明
该文档及其所含信息是 HSAE（上海航盛实业有限公司）的财产。该文档及其所含信息的复制、使用及披露必须 得到 HSAE（上海航盛实业有限公司）的书面授权。
www. hangsheng- sh. com
售后服务部 赵强
2013-10-18
上海航盛实业有限公司售后服务部
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
LC-AW50 (宽屏)
亮度
5500
输入端口
Dsub15×1(与S-Video/YCbCr共享） Dsub15×1(与VGA输出共享）均匀度
90%
HDMI×1
Dsub15×1（与VGA输入1共享）
对比度
4000：1
RCA×1
灯泡
Dsub15×1（与VGA 输入2共享），3.5mm Phone接口×1
液晶面板
0.59" TFT×3
控制口
RJ45×1
分辨率
扬声器
10W
Zoom
1.65X
工作噪音
36/32dBa(正常/节能）
镜头类型
手动聚焦和定焦
机器尺寸
112×312×386（H×W×D)
标准镜头
F1.6~2.08 f=19.36~31.94
净重
4.6kg
投影距离比
1.48~
2.47：1
电源要求
100-120/200-240V AC,50/60 Hz
图像对角线
30~300"
耗电量
360W(正常模式）260W（节能模式）图像格式
16：10（标准） 4:3（兼容）
待机功率
＜0.3W
投影距离
1.3-110.8米
认证标准
UL, IEC，CCC
梯形校正
垂直±30°水平±15°，中心梯形校正
工作温度
0 ~ 40℃
扫描频率
垂直：48~85Hz 水平:15~100Hz
标准附件
用户手册(光盘）、快速安装向导、无线遥控器×1（配电池）、电源线(1.8米）、VGA 线（1.5米）、镜头保护圈、
计算机时钟点
150MHz
遥控器
无线遥控×1。