LA-0010 Washing laundry
试用
用 者 ： 罗 怡然
岁
。
皱 是 我这 个年龄 的女 人 最 关 注 的护 肤 话 题
这款抗 皱 日晚霜
，
29
心
岁
，
试 用者 ： 邹 越
31
岁
肌 肤 因它而 紧
，
头 的新 鲜 感 还 没 有 退 却
，
一
肌 肤
却 出现 了 不 适
。
实度 增 加
，
反应
，
。
皮 肤 习 惯 了 南方 的 湿 润
，
黄 气 隐形 细 纹 淡 化 光 泽平 滑 亮丽 柔润 配 合 防 晒 功 能 让 肌 肤 不 受紫
，
， ，
幸好 朋 友 想 得 贴 心 用 过 以 后 清爽 多 了
平
时 我 使 用 的 面 膜 多是 保 湿 类
。
试用 者 ： 乔 企
29
，
岁
腻腻
生 懒 惰 的 我也
，
最 怕 涂抹 防 晒 霜 了
而这 的 感 觉 实在 不 舒 服 款 防 晒 El 霜 的 质 地 轻 盈
。
，
敷好 撕下 来 就 可 以 但 是 保 湿 的持 续 效 果 总是 不 太 理 想 用 了 爱 琪 美的保 湿 滋 润 面 膜 发 现
、
槲
黄 素载体
，
能排 毒
消肿
35
，
减 少清晨 面 部 的 浮 肿 现 象
。
试 用 者 ： 杨 佳丽
除 毒素
岁 运 营总 监
，
用 了这 个新 活 抗 皱 产 品
。
皮 肤 自深 层 细 胞 开 始 活 跃
，
，
促 进肌 肤 排
RNA 6000 Nano Kit for 2100 Bioanalyzer Systems Qui
RNA 6000 Nano Kit for 2100 Bioanalyzer SystemsQuick GuideThe complete RNA 6000 Nano Kit for 2100 Bioanalyzer Systems Kit Guide can be found in the online help of the Agilent 2100 Expert software.Kit ComponentsAgilent RNA 6000 Nano Kit (5067-1511)Agilent RNA 6000 Nano Chips Agilent RNA 6000 Nano Reagents (5067-1512) & Supplies25 RNA Nano Chips (yellow) RNA 6000 NanoLadder (1 vial, 5067-1529)2 Electrode Cleaners (blue) RNA 6000 Nano Dye Concentrate (1 vial)(green) RNA 6000 Nano Marker (2 vials)Syringe Kit (red) RNA 6000 Nano Gel Matrix (2 vials)1Syringe 4 Spin Filters (5185-5990)Tubes for Gel-Dye Mix30 Safe-Lock Eppendorf Tubes PCR clean (DNase/RNase free) for gel-dye mixFor Research Use OnlyNot for use in Diagnostic Procedures.Assay PrinciplesAgilent RNA kits for the 2100 Bioanalyzer system contain chips and reagents designed for sizing and analysis of RNA fragments. Each chip contains an interconnected set of microchannels that is used for separation of nucleic acid fragments based on their size as they are driven through it electrophoretically. This kit is designed for use with the 2100 Bioanalyzer system only.Applications and KitsAgilent RNA kits are designed for the analysis of total RNA (eukaryotic, prokaryotic, and plant) and mRNA samples. Available kits: Agilent RNA 6000 Nano kit (5067-1511), RNA 6000 Pico kit (5067-1513) and Small RNA kit (5067-1548) Storage Conditions•Freeze unopened RNA ladder at -28–-15°C (-18–5°F). Prepared ladder aliquots need to be stored at -28–-15°C (-18–5°F). Keep all other reagents and reagent mixes refrigerated at 2–8°C (36–46°F) when not in use to avoid poor results caused by reagent decomposition.2•Protect dye and dye mixtures from light. Remove light covers only when pipetting. Dye decomposes when exposed to light.•Store the chips at room temperature.Equipment Supplied with the Agilent 2100 Bioanalyzer System•Chip priming station (5065-4401)•IKA vortex mixerAdditional Material Required (Not Supplied)•RNaseZAP® recommended for electrode decontamination and routine electrode cleaning •RNase-free water recommended for routine electrode cleaning•Pipettes (10µL and 1000µL) with compatible tips (RNase-free, no filter tips, no autoclaved tips)•0.5mL and 1.5mL microcentrifuge tubes (RNase-free)•Microcentrifuge ( 13000g)•Heating block or water bath for ladder/sample preparationSample preparationFor total RNA or mRNA analysis, the sample concentration must be within the specified range. If the concentration of your particular sample is above this range, dilute with RNase-free water.SpecificationsSetting up the Chip Priming Station1Replace the syringe:a Unscrew the old syringe from the lid of the chip priming station.b Release the old syringe from the clip. Discard the old syringe.c Remove the plastic cap of the new syringe and insert it into the clip.d Slide it into the hole of the luer lock adapter and screw it tightly to the chip priming station.2Adjust the base plate:a Open the chip priming station by pulling the latch.b Using a screwdriver, open the screw at the underside of the base plate.c Lift the base plate and insert it again in position C. Retighten the screw.Physical Specifications Analytical SpecificationsTotal RNA AssaymRNA Assay Analysis time30min Quantitative range 25–500ng/µL 25–250ng/µL Samples per chip 12Qualitative range 5–500ng/µL 5–250ng/µL Sample volume 1µL Sensitivity (S/N>3)5ng/µL in water25ng/µL in water Kit stability 4 months Quantitative precision (within a chip)10% CV 10% CV Kit size25 chips12 samples/chip = 300 samples/kitQuantitative accuracy11Determined analyzing the RNA ladder as sample20%20%Maximum salt concentration in sample100mM Tris 0.1mM EDTA or 125mM NaCl 15mM MgCl 2100mM Tris 0.1mM EDTA or 125mM NaCl 15mM MgCl 233Adjust the syringe clip:a Release the lever of the clip and slide it up to the top position.Essential Measurement Practices•Handle and store all reagents according to the instructions on the label of the individual box.•Avoid sources of dust or other contaminants. Foreign matter in reagents and samples or in the wells of the chip will interfere with assay results.•Allow all reagents to equilibrate to room temperature for 30min before use. Thaw samples on ice.•Protect dye and dye mixtures from light. Remove light covers only when pipetting. The dye decomposes when exposed to light and this reduces the signal intensity.•Always insert the pipette tip to the bottom of the well when dispensing the liquid. Placing the pipette at the edge of the well may lead to poor results.•Always wear gloves when handling RNA and use RNase-free tips, microcentrifuge tubes and water.•It is recommended to heat denature all RNA samples and RNA ladder before use for 2min and 70°C (once) and keep them on ice.•Do not touch the 2100 Bioanalyzer instrument during analysis and never place it on a vibrating surface.•Always vortex the dye concentrate for 10s before preparing the gel-dye mix and spin down afterwards.•Use a new syringe and electrode cleaners with each new kit.•Use loaded chips within 5min after preparation. Reagents might evaporate, leading to poor results.•To prevent contamination (e.g. RNase), it is strongly recommended to use a dedicated electrode cartridge for RNA assays.•Perform the RNase decontamination procedure for the electrodes daily before running any assays. Refer to the kit guide for details on electrode cleaning and decontamination.Agilent RNA 6000 Nano Assay ProtocolPreparing the RNA Ladder1Spin the ladder down and pipette in an RNase-free vial.2Heat denature the ladder for 2min at 70°C.3Immediately cool the vial on ice.4Prepare aliquots in recommended 0.5mL RNase-free vials with the required amount for typical daily use.5Store aliquots at -28–-15°C (-18–5°F). After initial heat denaturation, the frozen aliquots should not require repeated heat denaturation.6Before use, thaw ladder aliquots on ice (avoid extensive warming).Preparing the Gel1Pipette 550µL of RNA gel matrix (red ) into a spin filter.2Centrifuge at 1500 g ±20% for 10min at room temperature.3Aliquot 65µL filtered gel into 0.5mL RNase-free microcentrifuge tubes. Use filtered gel within 4 weeks. Store at2–8°C (36–46°F).Handling ReagentsThe dye can cause eye irritation. Because the dye binds to nucleic acids, it should be treated as a potential mutagen.Kit components contain DMSO. DMSO is skin-permeable and can elevate the permeability of other substances through the skin.✓Follow the appropriate safety procedures and wear personal protective equipment including protective gloves and clothes as well as eye protection.✓Follow good laboratory practices when preparing and handling reagents and samples.✓Always use reagents with appropriate care.✓For more information, refer to the material safety data sheet (MSDS) on .Agilent Technologies Inc. 2001-2022Printed in Germany, Edition: 11/2022*G2938-90037*Part No: G2938-90037 Rev. E.00Document No: SD-UF0000031 Rev. E.00Allow the RNA dye concentrate (blue ) to equilibrate to room temperatureVortex RNA dye concentrate (blue ) for 10µL of RNA marker (green ) in all 12sample wells and in the well marked.to find information on your local Contact Visit the Agilent website. It offers useful information, support, and current developments about the products and /en/product/automated-electrophoresis/bioanalyzer-systems .Put a new RNA chip on the chip priming station.µL of gel-dye mix in the well marked .mL and then close the chip priming µL of gel-dye mix in the wells marked .µL of prepared ladder in well marked .Pipette 1µL of sample in each of the 12 sample wells. Pipette 1(green ) in each unused sample well.Put the chip horizontally in the IKA vortexer and vortex for 1 9 µl gel-dye 9 µl gel-dye1 µl ladder 1 µl sample5 µl marker。
美国巴克莱尼公司产品目录说明书
121Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA10-1515.........1.5" x 1.5" Standard ..............................................1810-1515PKG..1.5" x 1.5" Standard 4 x 8' Pcs.............................1810-1530.........1.5" x 3" Standard .................................................2110-1530PKG..1.5" x 3" Standard 4 x 8' Pcs ................................2110-1543.........1.5" Quarter Round ...............................................2010-1545.........1.5" x 1.5" x 45......................................................2010-1560.........1.5" x 6" Standard .................................................2410-1575.........1.5" x .75"..............................................................2010-1591.........1.5" x 1.5" Mono Slot ............................................1910-1592.........1.5" x 1.5" Bi-Slot Corner......................................1910-1593.........1.5" x 1.5" Tri-Slot .................................................1910-1594.........1.5" x 1.5" Bi-Slot Mid Frame ...............................1910-3030.........3" x 3" Standard ....................................................2310-3030PKG..3" x 3" Standard 2 x 8' Pcs ...................................2310-3092.........1.5" x 3" Tri-Slot Corner ........................................2210-3093.........1.5" x 3" Quad Slot................................................2210-3094.........1.5" x 3" Bi-Slot Mid Frame ..................................2211-1515.........1.5" x 1.5" Heavy...................................................1811-1515PKG..1.5" x 1.5" Heavy 4 x 8' Pcs .................................1811-1530.........1.5" x 3" Heavy......................................................2111-1530PKG..1.5" x 3" Heavy 4 x 8' Pcs ....................................2111-3030.........3" x 3" Heavy .........................................................2312-001............Upper Door Track 40 - Plastic ..............................8312-002............Lower Door Track 40 - Plastic ..............................8312-006............Sliding Door Guide 1", Upper ...............................8312-007............Sliding Door Guide 1", Lower ...............................8312-010............Mesh Clamp Profile, Clr - Max 13.1ft ...................8212-011............Stiffener/ Handle Profile, Clr - Max 9.8ft ..............8212-012............Sliding Door Guide 40 - Upper, Clr - Max 9.8ft....8312-013............Sliding Door Guide 40 - Lower, Clr - Max 9.8ft....8312-018............Panel Extrusion 40, Clr - Max 19.7ft ....................8212-022............Rolling Door Guide Profile, Clr - Max 13.1 ft.......8612-032............32 x 18 Bi-Slot .......................................................2512-090............Cover/Gasket Strip 1", Clear ................................2912-090B .........Cover/Gasket Strip 1", Black ................................2912-090Y .........Cover/Gasket Strip 1", Yellow ..............................2912-095............Aluminium Cover Strip 1"......................................2912-095B .........Aluminium Cover Strip 1", Black ..........................2912-101............Cover/ Gasket Strip 40, Clr - 6.6ft........................2912-1010.........1" x 1" Standard ....................................................1612-1010PKG..1" x 1" Standard 6 x 8' Pcs ...................................1612-101B .........Cover/ Gasket Strip 40, Blk - 6.6ft .......................2912-101Y .........Cover/ Gasket Strip 40, Yellow - 6.6ft..................2912-102............Al Cover Strip 40, Clr - 6.6ft..................................2912-1020.........1" x 2" Standard ....................................................1612-1020PKG..1" x 2" Standard 4 x 8' Pcs ...................................1612-102B .........Al Cover Strip 40, Blk - 6.6 ft. Length ..................2912-1030.........1" x 3" Standard ....................................................1712-105............Clamp Bar Profile ..................................................2712-106............Panel Gasket .........................................................2812-107............Mesh Gasket .........................................................2812-108............Panel Gasket 10 Clear - Max 410 ft.....................2512-109............19" Rack Angle......................................................2612-110............Rack Angle, Blank .................................................2612-111B .........PVC Cover Strip 40, Blk - 6.6ft.............................2912-111BL .......PVC Cover Strip 40, Blue - 6.6ft ..........................2912-112............Safety Cover Strip 40/28, Yellow - Max 9.8ft.......2812-114............Anti-Skid Cover 40, Blk - Max 65.6ft....................2812-2020.........2" x 2" Standard ....................................................1712-400............UHMW Slide Bar 40 max 120"...........................11112-402............Slide Strip 1" max 120".......................................11112-410............Slide Strip 1.5" max 120"....................................11112-420............UHMW Slide Bar 40 x 10 max 120"...................11112-421............UHMW Guide Profile .............................................8613-012............Steel Tube, Plastic Coated for handles(max. 120 in.).....................................................5413-410............Slide Profile 40....................................................11013-430............Slide Profile 40 Side Flange . (110)13-440............Slide Profile 28....................................................11013-450............Slide Profile 28 Side Flange ...............................11013-800............Slide Profile 56....................................................11013-810............Slide Profile 80....................................................11018-1010.........1" x 1" End Cap .....................................................3118-1020.........1" x 2" End Cap .....................................................3118-1030.........1" x 3" End Cap .....................................................3118-1515.........1.5" x 1.5" End Cap...............................................3118-1530.........1.5" x 3" End Cap..................................................3118-1543.........1.5" Quarter Round End Cap................................3118-1545.........1.5" x 1.5" x 45? End Cap.....................................3118-1575.........1.5" x .75" End Cap...............................................3118-2020.........2" x 2" End Cap .....................................................3118-3030.........3" x 3" End Cap .....................................................3118-710............Access Hole Plug ..................................................3118-713............Access Hole Plug - Steel ......................................3118-807............32x18 End Cap......................................................2519-004............Drill & Counterbore for BHCS or SHCS .............11419-006............Drill & Countersink for FHCS ..............................11419-007............Saw Cut for Linear Shaft.....................................11419-009............Tap 5/16-18........................................................11419-026............Panel Packing for Secure Transport ..................11419-029............Panel - Chamfer Corner ......................................11419-030............Panel - Notch Corner ..........................................11419-104............Special Miter Cut .................................................11419-200............Special Invoice Required ....................................11419-201............Assembly Required .............................................11419-202............Assembly Form Follows......................................11419-203............Packaging in Kit Form.........................................11419-204............Kit Form Follows..................................................11419-205............Special Assembly Documents Enclosed............11419-206............Engineering..........................................................11419-207............On-Site Installation..............................................11419-208............Special Packing Slip Required ...........................11419-210............Special Machining ...............................................11419-211............Miter Connection Service....................................11419-300............Inspection/Acceptance/Approval ........................11419-501............Saw Cut up to 3"x1.5".........................................11419-502............Saw Cut up to 3"x3"............................................11419-503............Saw Cut 6"x1.5"...................................................11419-511............Drill .277" Access Hole - Except 6" side ............11419-512............Drill & Tap (10/32",1/4",5/16", 3/8")....................11419-514............Drill & Tap (1/2" or 5/8" up to 1.5" Deep)...........11419-515............Step Drill for Universal Fastener 1.5" or 1"........11419-516............Drill/ Tap 5/16x1.5" for 5/16"Foot .......................11419-517............Drill/ Tap 3/8"x 2" for 3/8" Foot...........................11419-520............Step Bore for Pneum. Univ. Fastener(3/4" x 1/4")......................................................11419-525............Drill .277" Access Hole thru 6" side ...................11419-527............Panel - Thru Hole up to 3/8"l Profile Square 3"x1.5"l Profile Square 3"x3"l Profile Square 6"x1.5"..................................11419-603............Drill/ Tap/ Mill for Roller PA ................................11419-605............45° Miter Cut, up to 3x3" profile .........................11419-606............45° Miter Cut, 6"x1.5" profile ..............................11420-059............T-Slot Profile 1.5"..................................................3620-062............Heavy T-Slot Bar - 1.5".........................................3620-082............Economy T-Slot Nut, 1.5" - 5/16-18.....................3520-082SS.......Economy T-Slot Nut, 1.5" - 5/16-18,Stainless Steel ...................................................3520-083............Economy T-Slot Nut, 1.5" - 1/4-20.......................3520-088............Economy T-Slot Nut, #10-32...............................3520-093SS.......Economy T-Slot Nut 28, 1/4-20 Stainless Steel .......20-1010.........Cast Gusset 1"......................................................4520-1010C.......Cap for Cast Gusset 1".........................................4520-102z4........Gusset Profile ........................................................2720-182............Economy Offset T-Slot Nut, 1.5" - 5/16-18. (35)122Parker Hannifin CorporationIndustrial Profile Systems Business Unit Wadsworth, Ohio USA20-193............Economy Offset T-Slot Nut 1.5" - 1/4-20.............3520-200............Retainer for Wire mesh 1"Single ..........................8120-201............Retainer for Wire mesh 1" Double........................8120-202............Retainer for Wire mesh 1.5" Single ......................8120-203............Retainer for Wire mesh 1.5" Double.....................8120-300............Joining Plate, 1.5" x 3"..........................................4820-301............Joining Plate, 1.5" x 6"..........................................4820-302............Joining Plate, 3" x 3".............................................4820-303............Joining Plate, 3" x 6".............................................4820-304............Joining Plate, Corner 4.5" x 4.5"..........................4920-305............Joining Plate, T , 4.5" x 4.5".................................4920-306............Joining Plate, Corner 6" x 6"................................4920-307............Joining Plate, T , 6" x 6".......................................4920-310............Joining Plate, 1" x 2".............................................5020-311............Joining Plate, 1" x 4".............................................5020-312............Joining Plate, 2" x 2".............................................5020-313............Joining Plate, 2" x 4".............................................5020-314............Joining Plate, Corner 3" x 3".................................5120-315............Joining Plate, T , 3" x 3".......................................5120-330............Connection Element, 90 1.5" x 1.5" x 1.5"...........4220-335............Connection Element, 90 1" x 1" x 1"....................4320-336............Connection Element, 90 1" x 1" x 2"....................4320-337............Connection Element, 90 1.5" x 1.5" x 3"..............4220-338............Connection Element, 90 1.5" x 3" x 3".................4220-4040.........1 x 1 Single Gusset (die cast)..............................4520-440............Gusset Bracket, 3" x 3" x 1.5"..............................4420-441............Gusset Bracket, 3" x 3" x 3".................................4420-442............Gusset Bracket, 3" x 3" x 1".................................4420-500............Corner Element 1, 1.5"..........................................4620-501............Corner Element 1, 3".............................................4620-502............Corner Element 2, 1.5"..........................................4620-503............Corner Element 2, 3".............................................4620-504............Corner Element 3, 1.5"..........................................4620-505............Corner Element 3, 3".............................................4620-506............Machined Gusset 1" x 1"......................................4720-507............Machined Gusset 1" x 2"......................................4720-508............Machined Gusset 1.5" x 1.5"................................4720-509............Machined Gusset 1.5" x 3"...................................4720-8040.........2 x 2 Single Gusset (die cast)..............................4521-020............Rubber Insert 80....................................................9221-021............Clamping Shoe 80.................................................9221-032............Floor Fastening Set...............................................9221-057z4........L-Bracket Profile....................................................2721-060............L Base Floor Anchor 1.5"......................................9321-061............L Base Floor Anchor 1".........................................9321-073............UHMW Guide Insert Set - 1/4-20..........................8621-075............Roller Insert Set.....................................................8621-1020-04....Base Plate, 1" x 2", 1/4-20..................................10121-1020-05....Base Plate, 1" x 2", 5/16-18................................10121-1030-04....Base Plate, 1" x 3", 1/4-20..................................10121-1030-05....Base Plate, 1" x 3", 5/16-18................................10121-1530-06....Base Plate, 1.5" x 3", 3/8-16..............................10121-1530-08....Base Plate, 1.5" x 3", 1/2-13..............................10121-1530-10....Base Plate, 1.5" x 3", 5/8-11..............................10121-2020-05....Base Plate, 2" x 2", 5/16-18................................10121-2020-06....Base Plate, 2" x 2", 3/8-16..................................10121-2020-08....Base Plate, 2" x 2", 1/2-13..................................10121-250............Flange Foot 1.5" x 1.5".........................................9521-252............Flange Foot 1" x 1"................................................9521-255............Flange Foot 1.5" x 3.0".........................................9521-256............Flange Foot 3.0" x 3.0".........................................9521-300............Caster Swivel 2" - Hollow King Pin.......................9621-301............Caster Swivel 2", Locking - Hollow King Pin........9621-302............Caster Rigid 3" - Top Plate ...................................9721-303............Caster Swivel 3" - Top Plate.................................9721-3030-06....Base Plate, 3" x 3", 3/8-16..................................10121-3030-08....Base Plate, 3" x 3", 1/2-13..................................10121-3030-10....Base Plate, 3" x 3", 5/8-11. (101)21-304............Caster Swivel 3", Locking - Top Plate..................9721-305............Caster Swivel 3" - 7/16 Grip Ring.........................9621-306............Caster Swivel 3", Locking - 7/16 Grip Ring..........9621-309............Caster Swivel 3" - Hollow King Pin.......................9621-310............Caster Swivel 3", Locking - Hollow King Pin........9621-311............Caster Rigid 5" - Top Plate ...................................9721-312............Caster Swivel 5" - Top Plate.................................9721-313............Caster Swivel 5", Locking - Top Plate..................9721-316............Caster Swivel 5" - Plate 550lbs ..........................10021-317............Caster Swivel 5", Locking - Plate 550lbs ...........10021-318............Caster Swivel 5" - Plate 900lbs ..........................10021-319............Caster Swivel 5", Locking - Plate 900lbs ...........10021-320............Standard Duty 1-5/8" - 7/16 Grip Ring .................9621-323............Leveling Caster 1"- Threaded Stud M12..............9921-324............Leveling Caster 1" - Plate Mount.........................9921-325............Floor Lock - Plate Mount.....................................10021-327............Leveling Caster 1.5"- Threaded Stud M12...........9921-328............Leveling Caster 1.5"- Plate Mount.......................9921-330............Socket for 1.5" x 3" Heavy....................................9621-331............Socket for 1.5" x 3" Standard ...............................9621-332............Corner Bracket for Standard Duty Casters ..........9621-333............Straight Bracket for Standard Duty Casters ........9621-336............Caster Swivel 3" - 1/2" Stem ................................9721-337............Caster Swivel 3" - Locking - 1/2" Stem ................9721-338............Caster Swivel 5" - 1/2" Stem ................................9721-339............Caster Swivel 5"- Locking - 1/2" Stem .................9721-340............Furniture 2" - 5/16 Grip Ring.................................9821-341............Furniture 2" - 5/16 Grip Ring-Locking ..................9821-342............Institutional Twin Wheel ........................................9821-343............Institutional Twin Wheel Locking ..........................9821-344............Dual Wheel 3" - 1/2" Stem ....................................9821-401............Knuckle Foot 1.5", 5/16-18 x 2"............................9021-402............Knuckle Foot 1.5", 5/16-18 x 3"............................9021-403............Knuckle Foot 1.5", 3/8-16 x 3"..............................9021-404............Knuckle Foot 3", 1/2-13 x 4".................................9021-405............Knuckle Foot 3", 1/2-13 x 6".................................9021-406............Knuckle Foot 3", 5/8-11 x 4".................................9021-407............Knuckle Foot 3", 5/8-11 x 6".................................9021-409............Corner Mounting Plate ..........................................9221-410............Knuckle Foot 1" Delrin, 1/4-20 x 2"......................8921-411............Knuckle Foot 1" Delrin, 3/8-16 x 3"......................8921-412............Knuckle Foot 1" Steel, 1/4-20 X 2".......................8921-413............Knuckle Foot 1" Steel, 3/8-16 X 3".......................8921-414............Knuckle Foot 1" Steel, 1/2-13 x 3".......................8921-415............L-Base Leveling Foot 1.5".....................................9321-416............L-Base Leveling Foot 1"........................................9321-420............Leveling Foot 3, Bolt Down, 1/2-13......................9121-421............Leveling Foot 3, Bolt Down, 5/8-11......................9121-422............Anti-Vibration Leveler 1/2-13, Light......................9121-423............Anti-Vibration Leveler 1/2-13, Medium.................9121-424............Anti-Vibration Leveler 1/2-13, Heavy ...................9121-440............Floor Mounting Bracket 1.5".................................9421-441............Floor Mounting Bracket 3"....................................9421-442............Floor Mounting Bracket 1"....................................9421-443............Floor Mounting Bracket 2"....................................9421-500............Adapter Plate 1.5".................................................9921-501............Adapter Plate 1.0".................................................9921-502............Adapter Plate 1.5".................................................9921-504............Base Plate for heavy Casters.............................10022-111............Economy Mesh Clamp 1.5"..................................8122-115............Multiblock 1.5" - 1/4-20.........................................8022-116............Multiblock 1" - 1/4-20............................................8022-153............Corner Bracket 1.5"...............................................4122-154............Connector Cap 1.5" Radius ..................................4122-155............Connector Cap 45 Degree ....................................4122-202............Cable Tie Holder....................................................8722-204............T-Clip 5/32-1/4 w/Fast Kit .....................................8722-206............T-Clip 1/4-5/16 w/Fast Kit . (87)123Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA22-209z1........T-Clip 5/16-3/8 w/Fast Kit .....................................8722-211z1........T-Clip 3/8-1/2 w/Fast Kit .......................................8722-213z1........T-Clip 1/2-5/8 w/Fast Kit .......................................8722-216z1........T-Clip 5/8-3/4 w/Fast Kit .......................................8722-219z1........T-Clip 3/4-7/8 w/Fast Kit .......................................8722-223z1........T-Clip 7/8-1 w/Fast Kit ..........................................8722-230............Cable Hose Holder w/ English Fast Kit ................8723-030............Light Duty Aluminium Handle ...............................5323-031............Handle PA 132......................................................5423-032Z1.......Handle PA 179......................................................5423-033............Handle PA 93.5.....................................................5423-038............L-Handle Locking...................................................5523-038z1........Backing Plate.........................................................5723-039............L-Handle Non-locking............................................5523-046............Magnetic Catch......................................................6023-051............Strike Plate for Magnetic Catch............................6023-058............Mini-Key Safety Switch - Straight Key .................7023-059............Mini-Key Safety Switch - Angle Key.....................7023-060............Safety Switch 1 (1 NC + 1 NO).............................7223-061............Safety Switch 1 (2 NC)..........................................7223-062............Safety Switch 2 (1 NC + 1 NO).............................7323-063............Safety Switch 2 (2 NC + 2 NO).............................7323-064............Safety Switch 3 (2 NC) - To Lock.........................7423-066............Safety Switch 3 (2 NC) - To Unlock .....................7423-070............Open Angled Handle .............................................5323-071............Closed Angled Handle ..........................................5323-072............Tube Handle Ends.................................................5423-073............Tube Handle Center Supports ..............................5423-102............Mini-Key Mounting Bracket...................................7023-104............Safety Switch Mounting Bracket 1.......................7223-108............Mini Key Mounting Bracket - Top .........................7123-109............Mini Key Mounting Bracket - Sliding ....................7123-110............Safety Switch Mounting Bracket 3.......................7423-119............Mounting Bracket for Magnetic Catch..................6023-120............Ball Catch Bracket Style 1....................................5823-121............Ball Catch ..............................................................5823-122............Magnetic Catch Bracket........................................6023-124............Door Stop 1"..........................................................6323-125............Door Stop 1.5" - Straight.......................................6323-126............Door Stop 1.5" - Angle ..........................................6323-127............Ball Catch Bracket Style 2....................................5823-128............Ball Plunger, 3/8" Dia x .786"...............................5923-129............Ball Plunger, 1/2" x 1.10"......................................5923-130............Rachet Lock (for panel sliding doors)..................6323-133............Quarter Turn Latch T-Handle Non-Locking..........5523-134............Quarter Turn Latch Wing Knob Locking...............5523-135............Quarter Turn Latch - Square Insert ......................5523-137............Ball Catch Bracket 1"............................................5923-140z1........Spare Key for 23-134/23-144...............................5723-140z2........Square Key for 23-135/23-145.............................5723-140z4........Cam 45-2 Offset ....................................................5723-140z5........Cam 35-10 Offset ..................................................5723-140z7........Keeper Bracket......................................................5723-140z8........Cam 45-8...............................................................5723-142z1........Hooked Cam..........................................................5723-143............Quarter Turn Latch T-Handle Non-Locking Panel 5623-144............Quarter Turn Latch Wing Knob Locking Panel ....5623-145............Quarter Turn Latch - Square Insert Panel ...........5623-155............Slam Latch - Keyed...............................................6223-156............Slam Latch - Non Locking.....................................6223-158............Velcro Plate ...........................................................6323-159............Internal Handle for Quarter Turn Handles............5623-160............Deadbolt Latch ......................................................6223-210............Grabber Door Catch ..............................................6123-211............Grabber Door Catch w/Micro-Switch..................6123-212............Grabber Door Catch Bracket 90 degree ..............6123-213............Grabber Door Catch Bracket Flat.........................6123-220............Adjustable Hinge 1................................................6823-222............Adjustable Hinge 2................................................6823-224............Positioning Hinge 85°............................................6823-226............Positioning Hinge 120°..........................................6823-228............Positioning Hinge 155°..........................................6823-250............Hinge 1" - Steel .....................................................6623-250L .........Hinge 1" - Steel Left ..............................................6623-250R.........Hinge 1" - Steel Right............................................6623-251............Hinge 1"/1.5" - Steel..............................................6623-251L .........Hinge 1"/1.5" - Steel Left ......................................6623-251R.........Hinge 1"/1.5" - Steel Right ....................................6623-252............Hinge 1.5" - Steel ..................................................6623-252L .........Hinge 1.5" - Steel Left ...........................................6623-252R.........Hinge 1.5" - Steel Right ........................................6623-260............Pivot Joint 1", Blk ..................................................6923-261............Pivot Joint 1", Blk - Locking..................................6923-262............Pivot Joint 1.5", Blk ...............................................6923-263............Pivot Joint 1.5", Blk - Locking...............................6923-550............Plastic Hinge 1".....................................................6723-550L .........Plastic Hinge 1" - Left ...........................................6723-550R.........Plastic Hinge 1" - Right .........................................6723-551............Plastic Hinge 1.5"..................................................6723-551L .........Plastic Hinge 1.5" - Left ........................................6723-551R.........Plastic Hinge 1.5" - Right......................................6723-552............Plastic Hinge 1/1.5"...............................................6723-552L .........Plastic Hinge 1/1.5" - Left .....................................6723-552R.........Plastic Hinge 1/1.5" - Right...................................6723-620............Aluminum Hinge 1.5" - Right Long .......................6423-621............Aluminum Hinge 1.5" - Left Long..........................6423-622............Aluminum Hinge 1.5" - Right Short ......................6423-623............Aluminum Hinge 1.5" - Left Short .........................6423-624............Aluminum Hinge 1.5" - Receiver ..........................6423-625............Aluminum Hinge 1.5" - Double Pin .......................6423-626............Aluminum Lift off Hinge 1.5" - Heavy Duty ..........6523-626L .........Aluminum Lift off Hinge 1.5" - Left .......................6523-626R.........Aluminum Lift off Hinge 1.5" - Right .....................6523-630............Aluminum Hinge 1" - Right Long ..........................6423-631............Aluminum Hinge 1" - Left Long.............................6423-632............Aluminum Hinge 1" - Right Short..........................6423-633............Aluminum Hinge 1" - Left Short ............................6423-634............Aluminum Hinge 1" - Receiver..............................6423-635............Aluminum Hinge 1" - Double Pin ..........................6423-636............Aluminum Lift off Hinge 1" - Heavy Duty..............6523-636L .........Aluminum Lift off Hinge 1" - Left...........................6523-636R.........Aluminum Lift off Hinge 1" - Right ........................6523-640............Aluminum Lift off Hinge 1"/1.5" - Heavy Duty......6523-640L .........Aluminum Lift off Hinge 1"/1.5" - Left ...................6523-640R.........Aluminum Lift off Hinge 1"/1.5" - pression Springfor Economy T-Nuts, 1/pression Springfor Economy T-Nuts, 5/16-18...........................3525-001............T-Slot Nut 40 Steel 1/4-20....................................3425-002............T-Slot Nut, 1.5" - 5/16-18......................................3425-002SS.......T-Slot Nut, 1.5" - 5/16-18, Stainless Steel...........3425-003............Standard Fastener 5/16-18...................................3225-003SS.......Standard Fastener 5/16-18, Stainless Steel........3225-004............Universal Fastener 5/16-18..................................3325-005............Drop In T-Nut 10-32...................................................25-006............Drop in T-Nut 1/4-20", Rubber post...........................25-007............Drop in T-Nut 5/16-18", Rubber post.........................25-008............Drop-in T-Nut, 1/4-20, 28/56......................................25-009............T-Slot Nut, 1.5" *- #10-32......................................3425-014............Single Ear Standard Fastener 1.5" - 5/16-18.......3225-015............Profile to Wall Universal Fastener 5/16-18..........3325-016............Butt Fastener Assembly 5/16-18..........................3325-017............Butt Fastener Assembly 1/4-20............................3325-022............Standard Fastener, 1/4-20....................................3225-022z1........Standard Fastener, 1/4-20 - Clip .. (32)。
洗涤加强剂-Spray'N Wash 亮白与Resolve力说明书
Product Safety Data Sheet1. PRODUCT AND COMPANY IDENTIFICATION Product NameSpray 'N Wash Bright & White with Resolve powerProduct Identifier Laundry additive liquid for in-wash applications TDS formula code0167353 (R&D Code: Mira Lab-Book 290-54) Validation Date September 10th, 2008Distributor Reckitt Benckiser North America Inc.Morris Centre IV, 399 Interface Parkway (P.O. 225) Parsippany, N.J. 07054-0225Emergency Contact 1-800-228-4722Transport Emergency 1-800 424 9300 (North America) ; 703-527-3887 (outside North America)2. COMPOSITION IngredientsCAS N. Concentration RangeExposure LimitHydrogen Peroxide 7722-84-1 2% - 4% None Alcohol Ethoxylated C12-C16 7EO 68551-12-2 4% - 6% None62338-81761 (44oz) ; 62338-81762 (75 oz)August 13th, 2009Alcohol Ethoxylated C12-C16 3EO 68551-12-2 1% - 3% NoneSodium Alkylbenzen sulphonate 85117-50-6 2% - 4% None3. HAZARDS IDENTIFICATIONEMERGENCY OVERVIEW:WARNING. EYE AND SKIN IRRITANT. MAY BE HARMFUL IF SWALLOWEDKEEP OUT OF REACH OF CHILDREN.DO NOT get in eyes, on skin or ingest. May be severely irritating to eyes. wash hands after use. For sensitive skin the use of gloves is recommendedContains Hydrogen peroxide and surfactants4. FIRST- AID MEASURESFirst Aid - Eye Contact In case of eye contact, hold eyes open and IMMEDIATELY, rinse thoroughly with plenty of waterRemove any contact lenses and continue rinsing for at least 15 minutes. I f irritation persists get medical attentionFirst Aid - Skin Contact I n keeping good hygienic practices, wash exposed areas thoroughly with soap and water. I f any irritation occurs get medical attentionFirst Aid - Ingestion If swallowed, rinse mouth and drink a glass of water. DO NOT induce vomiting. Call a physician or poison control centreFirst Aid - Inhalation The product is not volatile. In case of accident, move the person to fresh air5. FIRE- FIGHTING MEASURESFlammability Not flammableFire/Explosion Hazard None knownFire fighting media/Instructions Not a fire hazard. Use exthinguishing media for surrounding materialsSpecial equipment for Fire Fighters As in any fire, wear self-contained breathing apparatus, pressure-demand, MSHA/NI OSH (approved or equivalent) and full protecting gearFlash Point (°C) > 93.3°C (based on available information on raw materilas)Autoignition Temperature No information available6. ACCIDENTAL RELEASE MEASURESPersonal precautions Avoid contact with skin and eyes.People working on cleaning-up accidental spillages should be using appropriate gloves and eye/body protection Spillages Small splillages: Cordon-off the area. Soak-up spill with adsorben material and dispose off as appropriate. Rinse surface residue and wipe dry to avoid splippery conditionsLarger spillages: Cordon-off the area. Large spill should be collected and disposed according to local regulations7. HANDLING AND STORAGEHandling Careful handling of chemicals is required. WARNING: EYE AND SKIN IRRITANT. MAY BE HARMFUL IFSWALLOWED. Avoid contact with eyes and skin.Do not ingestStorage Conditions Store the closed packages cool and under dry conditions. Do not freeze. Store in original container in a secure area, inaccessible to children and petsKEEP OUT OF THE REACH OF CHILDREN8. EXPOSURE CONTROL AND PERSONAL PROTECTIONEngineering Control Ensure adequate ventilation, especially in confined areasEye protection Wear safety goggles if the exposure is likely to be prolonged (emergency responders should wear appropriate body protection)Skin protection Wear safety gloves if the exposure is likely to be prolonged (emergency responders should wear appropriate body protection)Respiratory protection In case of airborne dusting wear dust mask (emergency responders should wear appropriate body protection)Body protection Wear suitable protective clothes if the use is likely to be prolonged (emergency responders should wear appropriate body protection).Hand protection Protective gloves (emergency responders should wear appropriate body protection).9. PHYSICAL AND CHEMICAL PROPERTIESAppearance Clear liquidColour AmberOdour perfumed (fruity scent)pH (as is)3,4 - 4,4Solubility in water (kg/m3)high solubilityViscosity (cPs, 25°C)< 100 (Brookfield RV, spindle 1, 60 rpm)Specific gravity (g/mL)1,0179 - 1,027910. STABILITY AND REACTIVITYChemical Stability The product is chemically stable under normal conditions. Store away from direct sun-light and from any source of heatConditions to Avoid T > 50°C, product contaminationHazardous decomposition products Carbon oxide and unknown organic compoundsMaterials to Avoid Hypochlorite based bleaches, metal ions11. TOXICOLOGICAL INFORMATIONEyes contact May be severely Irritating to eyes (based on raw material data)Skin contact Skin Irritant (based on raw material data).Ingestion May be Harmful by ingestion (Oral LD50 > 5000mg/kg, based on raw material data)Sensitization Not expected to be a sensitizer (based on raw material information)Chronic Effects No information availableCarcirogenic Effects Not listed as carcirogenic by OSHA, NTP, or IARCMutagenic Effects No information availableReproductive toxicity No information availableTarget Organ Effects No information availableInformation is based on data on the components and the toxicology of similar products12. ECOLOGICAL INFORMATIONIncorporated surfactants are ultimately aerobically biodegradable according to OECD301 methodsMobility Not Applicable Bioaccumulation Not ApplicableEcotoxicityNot Applicable Aquatic toxicity The liquid contains hydrogen peroxide which decomposes in oxygen and water with no adverse effect For surfactants with EC 50 < 1mg/l no adverse long-term effects to the aquatic environment are foreseen,due to their biodegradability and non-bioacculable properties. the product may exhibit acute effects in case of massive disscharge in watercourses.13. DISPOSAL CONSIDERATIONSProduct Disposal Disposal should be done in accordance with local/state or federal legislation Do not release in ground or on riverContainer DisposalCleaned to recycling, landfill or incinerator 14. TRANSPORT INFORMATIONGeneral Remark: Not classified as hazardous for transport.Dot Classification: Not a DOT regulated material (United States)TDG Classification: Not a TDG regulated material (Canada)UN NumberNot applicableProper Shipping Name Not applicable Packaging Group Not applicable Maritime TransportationNot applicable15. REGULATORY INFORMATION FEDERAL and STATE REGULATIONSARA Title III, Section 313 Toxic Chemical Notification Release Reporting: NonePROPOSITION 65 This product contains the following ingredients which require a warning under theSafe Drinking Water & Toxic Enforcement Act: NoneTSCA Listing Raw materials used in this formula are resistered and compliant with TSCA inventory16. OTHER INFORMATIONHMIS (USA) Health Hazard: 2 Fire Hazard: 0 Reactivity: 1Personal Protection: B NFPA Aerosol Level: Not applicable PSDS first issue September 10th, 2008PSDS last revision November 6th, 2008Reason for revisionUPC Code AdditionAugust 13th, 2009September 10th, 2008The information given in this data sheet is believed to be true and correct. This quality is not intended for wuality assurance purposedFinal determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with cautionsAlthough certain hazards are described herein, we cannot guarantee that these are the only hazards that exist。
Engineered O-Rings Catalog ORD 5710 美国Parker O-Rin
Engineered O-Rings Catalog ORD 5710 USASimple solutionsfor complex sealing problemsIn the O-Ring Division’s monitoring each step of the process Finite element analysisElement Analysistion process and ensures theselection of the right materialand geometry for a customer’sapplication. As an addedbenefit, FEAused to predict service life.a simple interfacespecific glands and seals. Itversions of these books, availableas ORD 5703 (US) and 5705(Europe), provide engineersfor static and dynamic seals,with world productionamounting tobillions per year.In 1937,Niels A. Christensen, aDanish emigrant to the USA,was awarded a patent for thisring with the perfectgeometricalshape.In 1949,Parker O-ring materialsled to the aeronautical specifica-tion MIL-P-5515 B and to the dimensionalstandards MS 29512 and 513, which werebased on Parker O-rings. Since then, theO-ring has become a vital sealingelement in all kinds of fluidpower equipment.advice from Parker sealing experts isnever far away.Parker O-Ring division’s manufacturing facilities span 4 continents and 9countries. Some of these The division’s North American headquarters, located in Lexington KY , isApplicationsTransportation•Brakes/ABS•Cooling/air conditioning •Fuel and diesel injection, spark plugs•Quick connects, couplings, gear units•Shock absorbers •Steering systems•Transmissions and radiator sealsAerospace•Aircraft engines, wheels and brakes•Control and actuation systems•Fuel systems•Space shuttle launch vehiclesMedical•Dyalizers•Syringes, infusions•USP Class VI and FDA “White Listed” formulations are availableSemiconductor Processing•For wet, dry and thermal processes•Parker UHP Processing:Parker uses totally enclosed and dedicated manufacturing areas for compounding,preparation, molding, cleaning and final packaging of o-rings in critical compounds for semiconductor processing applicationsFluid Power•Accumulators •Cylinders, valves •Filters •Fittings •Pumps•Rotary actuatorsConsumer Products•Appliances•Compounds meeting the requirements/recommen-dations: FDA, NSF, WRC,DVGW, BGA, KTW •Heating/plumbing •Sanitary equipmentChemical Processing Industry (CPI)•Equipment and components requiring extremely high chemical inertness attemperatures up to +320°CEnergy/Oil Field•Drilling•Exploration •Production •TransportationParker O-rings are used in many applications and industries, including:1-800-C-Parker Parker O-Ring Division Worldwide LocationsNorth AmericaUSAParker Hannifin CorporationO-Ring Division2360 Palumbo Drive Lexington, KY 40509 Phone: (859) 269-2351Fax: (859) 335-5128 Parker Hannifin CorporationO-Ring Division104 Hartmann Drive Lebanon, TN 37087Phone: (615) 444-0191Fax: (615) 449-7312 Parker Hannifin CorporationO-Ring Division109 Industrial Park Drive Livingston, TN 38570 CanadaParker Hannifin CorporationO-Ring Division255 Hughes RoadOrillia, Ontario L3V 2M3 Phone: (705) 325-2391Fax: (705) 325-5721 MexicoParker Hannifin CorporationO-Ring DivisionPSDM Business Unit Diagonal Lorenzo de la Garza #13 Ciudad IndustrialH. Matamoros, Tam. 87490 Parker Hannifin CorporationO-Ring DivisionBRCO Business UnitCalle Sexta Y Vizcaya #95 Col. EuzkadiH. Matamoros, Tam. 87370 EuropeAustriaSee GermanyBelgiumParker Hannifin SA NVParc Industriel Sud, Zone II 15, Rue du Bosquet1400 NivellesPhone:+(32) 67-28 09 00 Fax:+(32) 67-28 09 99 Czech RepublicParker Hannifin s.r.o. Podebradská 100528912 SadskáPhone: +(420) 325-55 5111 Fax: +(420) 325-55 5112 DenmarkPolar Seals A/S Bjergvangen 23060 EspergærdePhone: +(45) 49 12 17 00 Fax: +(45) 49 12 17 01FinlandParker Hannifin OyYlastontie 16FIN-01510 VantaaPhone: +(358) 9-47 67 31Fax: +(358) 9-47 67 32 00FranceParker Hannifin RakZ.l. du Mont-BlancB.P. 482, Ville-la-Grand74108 Annemasse-CédexPhone: +(33) 4-50 87 80 80Fax: +(33) 4-50 87 80 76GermanyParker Hannifin GmbHO-Ring DivisionStuifenstr. 55D-74385 PleidelsheimPhone:+(49) 71 44-206-0Fax: +(49) 71 44-2 37 49HungaryParker Hannifin CorporationBudapest Representation OfficeVezer u. 156-1581148 BudapestPhone: +(36) 1-2 52 81 37Fax: +(36) 1-2 52 81 29IrelandSee United KingdomItalyParker Seals S.p.A.Via Marzaghette 2I-25030, Adro (BS)Phone: +(39) 030 754 811Fax: +(39) 030 745 8210Parker Hannifin S.p.A.Via Priv. Archimede, 120094 Corsico (Mi)Phone: +(39) 02-4 51 92-1Fax: +(39) 02-4 47 93 40NetherlandsParker Hannifin B.V.Edisonstraat 1P.O. Box 3407570 AH OldenzaalPhone: +(31) 541-58 50 00Fax: +(31) 541-58 54 59NorwayParker Hannifin A/SBerghagenP.O. Box 3008N-1402 SkiPhone: +(47) 64 91 10 00Fax: +(47) 64 91 10 90PolandParker Hannifin Sp. z.o.o.ul. Parowcowa 8B02-445 WarsawPhone: +(48) 22-8 63 49 42/43Fax: +(48) 22-8 63 49 44RussiaParker Hannifin CorporationKomsomolsky Prospect 42Office 407119827 GSP Moscow G-48Phone: +(7) 095-234 0054Fax: +(7) 095-242 0907Slovakiasee Czech RepublicSwedenParker Hannifin Sweden ABBox 831416308 SpangaPhone: +(46) 8-7 60 29 60Fax: +(46) 8-7 61 81 70SwitzerlandSee GermanySpainParker Hannifin Espana S.A.Paseo Cordellas, 5708290 Cerdanyola-del-Valles(Barcelona)Phone: +(34) 93-6 91 50 62Fax: +(34) 93-6 91 46 19United KingdomParker Hannifin plcSeal GroupParkway, Globe ParkMarlow, Bucks SL7 1YBPhone: +(44) 16 28-40 40 88Fax: +(44) 16 28-40 40 89Asia PacificAustraliaParker Hannifin Australia Pty. Ltd.9 Carrington Road2154 (NSW) Castle HillPhone: +(61) 2-96 34 77 77Fax: +(61) 2-98 42 51 11ChinaParker HannifinFluid Power Systems(Shanghai) Co., Ltd.280 Yun Qiao RoadJian Qiao Export Processing ZoneShanghai 201206Phone: +(86) 21-5031 2525Fax: +(86) 21-5834 3714Parker Asun Sealing CompanyNo. 26 Tian Bao RoadTian Bao Industrial ZoneDong Guan CityGuang Dong, P.R.O.C.Hong KongParker Hannifin Hong Kong Ltd.8/F Kin Yip Plaza9 Cheung Y ee StreetCheung Sha Wan, KowloonPhone: +(852) 24 28 80 08Fax: +(852) 24 80 42 56JapanParker Hannifin Japan Ltd.Osaka Sales OfficeNo. 2 Tani Bldg.1-4-25, Nishi-Miyahara,Yodogawa-KuPhone: +(81) 6-48 07-32 88Fax: +(81) 6-48 07-32 99KoreaParker Hannifin Korea Ltd.902 Dae Heung Bldg.648-23 Yeaksam-dongKangnam-Ku, Seoul 135-080Phone: +(82) 2-5 61 04 14Fax: +(82) 2-5 56 81 87SingaporeParker Hannifin Singapore Pte., Ltd.No. 11 Fourth Chin Bee RoadJurong Town 61 9702Phone: +(65) 261 5233Fax: +(65) 265 5125TaiwanParker Hannifin Taiwan, Ltd.8F-1, No 102 Sung Lung RoadTaipeiPhone: +(886) 2 8787 3780Fax: +(886) 2 8787 3782AfricaParker Hannifin Africa Pty. Ltd.Parker Place10 Berne AvenueAeroportKempton Park, South AfricaPhone: +(27) 11-3 92 72 80Fax: +(27) 11-3 92 72 13Latin AmericaArgentinaParker Hannifin Argentina SAICStephenson 27111667 Tortuguitas - Malvinas Arg.Buenos AiresPhone: +(54) 1-1 47 52-41 29Fax: +(54) 1-1 47 52-37 04BrazilParker Hannifin do BrasilIndustria e Comercia Ltda.Via Anhanguera, Km 25,305275 Sao Paulo / SPPhone: +(55) 11-39 17-10 99Fax: +(55) 11-39 17-08 17Continental HeadquartersManufacturing plants1/2-2.5M-CE。
奶牛器材说明书
NoDescription List DS24030Catgut With Needle DZ $47.55DS24B30Braunamid With Needle Dz DZ $47.55DS30B20Braunamid With Needle Dz DZ $47.55HR2600Catgut With Needle DZ $42.15J0001Prod with Batteries EA $82.00J0003Bull Ring Medium Steel 2 1/2"ID EA $6.30J0003CCopper Bull Ring 2 1/2"ID-3"OD EA $13.50J0004Hug'S Teat Knife EA $36.00J0005Danish Teat Knife EA $15.00J0005STeat Knife Probe Pt W/Hook EA $16.50J0007Christensen'S Teat Scissors EA $70.00J0008Danish Teat Slitter EA $51.00J0009CCornell Teat Curette EA $15.60J0009LBLichty Teat Knife Blunt EA $19.50J0009LSLichty Teat Knife Sharp EA $19.50J0010Teat Blades 6Pk 6PK $15.00J0011BTeat Tumor Extractor 4.5mm EA $54.00J0012Teat Cannula Disposable 100*$5.70J0012DPlastic Teat Dilators 100*$21.00J0012XShort Nozzle Teat Cannula 100$12.00J0013LTeat Tube Ex Long W/Stylet DZ $19.50J0014LLarsen'S Teat Tube Card 36$74.00J0014LADr. Larsen's Test Tube for 3PK $9.00J0014LBDr Larson's Teat Tube for 10$37.00J0014TBTeat Bandage 5M EA $18.00J0015Cesarean OB Forceps EA $42.00J0015CBovine Cervical Forceps EA $52.00J0016Linde Embryotomy Knife EA $45.00J0017Embryotomy Knife EA $33.00J00180B Wire 10Mtrs EA *$29.90J0018CCase for Fetatome EA $51.00J0018HHauptner OB Wire EA $38.50J0018IInsert. Coil & Cleaning Brush EA $50.00J0018TThygesen Fetatome W/Coil EA $382.00J0018USUtrecht Fetatome With Insert EA $387.00J0018USD4Nut Cover Guide Hole EA $33.00J0019OB Double Action Hook EA $28.00J0019COstertag'S Blunt Eye Hook EA $9.00J0019HBHarm'S OB Hook Blunt EA $12.00J0019HSHarm'S OB Hook Sharp EA $12.00J0019RRuggeberg'S Dble Eye Hook EA $21.00J0019VVienna Double Eye Hook EA $39.00J0020OB Wire Guide EA $8.10J0020DOB Wire Drop Guide EA $9.00J0020HHauptner OB Wire Guide EA $59.50J0021OB Wire Handle & Container EA $39.00J0021HOB Wire Handle EA $13.50J0021LLyss OB Wire Handle EA $24.00J0021SSutter OB Wire Handle EA $21.00J0022Pig OB Forceps EA $25.50J0022APuppy OB Forceps EA $15.00J0022HMclean'S OB Forceps EA $36.00J0022TT-Bar Swine Snare EA $49.00J0023SOB Chain Handle EA $9.60J0024GLOB Chain Stainless 60"EA $62.00J0024GSOB Chain Stainless 30"EA $53.00J0024TT-Bar OB Chain Handle EA $40.50J0024VIVulva Insertion Needle EA $9.00J0024WOB Chain Handle EA $12.60J0024WHOB Chain Plated 45"EA $9.00J0024WLOB Chain Plated 60"EA *$10.50J0024WMOB Chain Handle W/Cover EA $9.00J0024WSOB Chain Plated 30"EA *$7.50J0024XLNylon Calving Strap 60"EA $16.50J0024XSNylon Calving Strap 30"EA $14.55J0025Perivaginal Tape 5M EA *$21.30JORGENSEN LABORATORIES, INC.Price list effective JULY 2022Page 1J0025UA Umbilical Tape 1/8" X 20yds EA*$12.00 J0025UB Umbilical Tape 3/8" X 20yds EA*$17.40 J0025UC Umbilical Tape 1/4" X 20yds EA*$15.40 J0026Buhner Suture Needle EA$24.00 J0026EN Ewe Prolapse Retainer Protainer EA$9.60 J0026G Gerlach'S Prolapse Needle EA$18.00 J0027G Chamber'S Equine Catheter EA$37.50 J0027R Bulb & Iv Pump EA$15.00 J0029SP JorVet Shoulder EA$19.00 J0029SPS JorVet Shoulder Small EA$19.00 J0031A10cc Hauptner Syringe EA$117.00 J0031B30cc Hauptner Syringe EA$101.00 J0031C50cc Hauptner Syringe EA*$101.00 J0031D01Comp.Grip 30/50cc Hauptner Syr EA$68.00 J0031D01A Hauptner Complete Grip 10cc EA$60.00 J0031D01E Hauptner Complete Grip 25cc EA$66.50 J0031D02Thumb Grip W/O Dos.Reg.30/50cc EA$21.00 J0031D02A Hauptner Thumb Grip L/R 10cc EA$28.00 J0031D02E Hauptner Thmb.Grip Ls/Reg.25cc EA$27.00 J0031D02R Hauptner Thmb Grip W/Regulator EA$42.00 J0031D03Haupt.Syr.Grip W/Ratchet EA$28.00 J0031D04Hauptner Syr.Lock Screw EA$3.00 J0031D05Hauptner Syr. Grip Spring EA$1.80 J0031D06Hauptner Syr. Ratchet W/Screw EA+$10.00 J0031D07Hauptner Ratchet Spring EA+$1.50 J0031D08Hauptner Dosage Reg. 30/50cc EA$26.00 J0031D08A Hauptner Dosage Regul. 10cc EA$24.00 J0031D08E Hauptner Dosage Regul. 25cc EA$24.00 J0031D08S Haupt.Sprng Clip for Dos.Reg EA$1.50 J0031D09A Hauptner Comp.Plung. 10cc EA$27.00 J0031D09B Hauptner Comp.Plung. 30cc EA$27.00 J0031D09C Hauptner Comp.Plunger 50CC EA$28.00 J0031D09E Hauptner Comp.Plung. 25cc EA$28.00 J0031D10A Hauptner Inner Rod 10cc EA$9.30 J0031D10B Hauptner Inner Rod 30cc EA$8.30 J0031D10C Hauptner Inner Rod 50CC EA$8.30 J0031D10E Hauptner Inner Rod 25cc EA$8.30 J0031D11A Hauptner Outer Rod 10cc EA$10.50 J0031D11B Hauptner Outer Rod 30cc EA$10.50 J0031D11C Hauptner Outer Rod 50CC EA$10.50 J0031D11E Hauptner Outer Rod 25cc EA$10.50 J0031D12Hauptner Plate Plunger 30/50CC EA$4.50 J0031D12A Hauptner Plate Plung. 10cc EA$4.50 J0031D12E Hauptner Plate Plung. 25cc EA$4.65 J0031D13Hauptner Tension Screw 30/50CC EA$4.50 J0031D13A Hauptner Tension Screw 10cc EA$4.50 J0031D14A Hauptner Metal Cover 10cc EA$16.50 J0031D14B Hauptner Metal Cover 30cc EA$16.50 J0031D14C Hauptner Metal Cover 50cc EA$18.00 J0031D14E Hauptner Metal Cover 25cc EA$21.00 J0031D15A Hauptner Glass Barrel 10cc EA$6.00 J0031D15B Hauptner Glass Barrel 30cc EA$6.00 J0031D15C Hptnr. Glass Barrel 50cc EA$6.00 J0031D15E Hauptner Glass Barrel 25cc EA$6.00 J0031D15PB Plastic Barrel 30cc EA$2.40 J0031D15PC Plastic Barrel 50cc EA$6.00 J0031D16Haupt. Washer Set Comp. 50/30C EA*$7.50 J0031D16A Hauptner Wash/Pack Set 10cc EA$7.50 J0031D16E Hauptner Wash/Pack 25cc EA$7.50 J0031D16M Haupt.Washer Set(Less#19)50/30SET+$6.75 J0031D16PR Piston Rubber Only EA$1.80 J0031D22Haupt Luerlck W/Endpl 30/50cc EA$7.50 J0031D22A Haupt Luerlock W/Endpl. 10cc EA$15.00 J0031D22DE Haupt Luerlock W/Endpl. 25cc EA$14.25 J0031D22DEM LL & End Plate - One Piece 25cc EA$9.50 J0031D22EA Endplate 10cc EA$4.50 J0031D23Kit Hauptner Syringe Repair EA$18.00 J0031E25cc Hauptner Minidose Syringe EA$115.00 J0032E Swiss Style Hoof Knife EA$27.50 J0032F Folding Hoof Knife W/Pick EA$12.75Page 2J0032HG Hoof Groover - Angled EA$18.00J0032HGS Hoof Groover - Straight EA$19.50 J0032HL Hauptner Hoof Knife Left EA$42.00 J0032HLE Hoof Knife Left-Economy EA$12.00 J0032HR Hauptner Hoof Knife Right EA$42.00 J0032HRE Hoof Knife Right Economy EA$12.00 J0032HSE Econ.Hoof Knife Set EA$60.00 J0032HWL Hauptner Hoof Knife Left EA$34.90 J0032HWR Hauptner Hoof Knife Right EA$34.90 J0032JL Jorvet Hoof Knife - Left EA$18.00 J0032JR Jorvet Hoof Knife - Right EA$18.00 J0032P Hoof Pick EA$2.25 J0032Z Loop Hoof Knife EA$21.00 J0033H Hoof Knife Hone EA$16.50 J0034Hoof Knife W/Double Edge EA$36.00 J0034AD Aesculap Double Edge Hoof Knife EA$24.30 J0034CL Hoof Knife Left 5/8"Blade EA$33.00 J0034CLE Hoof Knife-Left Economy EA$12.90 J0034CNL Hoof Knife 3/8"-Lh EA$24.00 J0034CNLE Hoof Knife Left-Economy EA$9.00 J0034CNR Hoof Knife 3/8"-Rh EA$24.00 J0034CNRE Hoof Knife Right Economy EA$9.00 J0034CR Hoof Knife Right 5/8" Blade EA$33.00 J0034CRE Hoof Knife-Right Economy EA$12.90 J0034CVL Hoof Knife - Left EA$24.30 J0034CVR Hoof Knife-Right EA$24.30 J0034KL Hoof Knife - Left EA$15.00 J0034KR Hoof Knife - Right EA$15.00 J0034L Small Loop Abscess Knife EA$50.00 J0034O Oval Hoof Knife EA$40.00 J0034S Hoof Searcher EA$9.00 J0035Steel Hoof Trimmer EA$167.00 J0035B Hauptner Hoof Tester EA$113.00 J0035D1spare Blades for Hoof Trimmer EA$47.00 J0035EC Ryding Hoof Tester EA$214.00 J0035F Adjustable Hoof Tester EA$145.00 J0035LP Hoof Tester Large EA$45.00 J0035P Hoof Tester Special Size EA$40.50 J0035XL Hoof Tester SS 21"EA$92.00 J0036B Latex Elastrator Bands100$3.00 J0036E Even Crush Emasculator EA$230.00 J0036ED1Center Bolt (J0036E)EA$23.00 J0036ED2Extra Crush Iece Screw EA$6.60 J0036FS Franks Emasculator S/S EA$105.00 J0036G Sands Emasculator EA$192.00 J0036GD3Ratchet Spring for Sands Emaculator EA$17.00 J0036HD Elastrator- Heavy Duty EA$21.00 J0036P Standard Emasculator EA$136.00 J0036ED1Center Bolt J0036E EA$20.00 J0036PD1Center Bolt EA$23.00 J0036S Small Emasculator 8"EA$99.00 J0036W White'S Mod.Emasculator 12"EA$240.00 J0036WD1Center Bolt J0036W EA$23.00 J0036WD2Extra Crush Iece Screw EA$16.00 J0036WS White'S Mod. Emasculator 8"EA$66.00 J0037Reimer Emasculator S/S EA$456.00 J0037C Reimer Emasculator S/S M09EA$495.00 J0037CD1Handle Spring-M09EA$13.00 J0037DCD2Ratchet-M09EA$27.00 J0037CD3Rachet Spring-M09EA$14.00 J0037CD5Center Bolt Wing Nut-M09EA$27.00 J0037CD6Center Bolt Washer-M09EA$9.00 J0037CD7Handle Spring Screw EA$6.00 J0037CD8Thumb Screw for Ratchet Spring EA$12.00 J0037CD13Cutting Handle Only EA$80.00 J0037D02Ratchet for Reimer EA$37.00 J0037E Chain Ecrasseur EA$450.00 J0037EMC Emasculatome 14"EA$157.00 J0037EMD Emasculatome 16"EA$166.00 J0037EME Emasculatome 19"EA$186.00 J0037H Hauptner Reimer Emasculator EA$920.00Page 3J0037K Knee Brace for Emasculatome EA$15.00J0037N Newberry Castrating Knife EA$33.00 J0037NB Newberry Blade EA$4.50 J0037S Serra Emasculator W/Ratchet EA$704.00 J0037SA Serra Emasculator Modified EA$780.00 J0037SAS Serra Modified S/S EA$565.00 J0037SS Serra Emasculator S/S EA$546.00 J0038Bayer Mouth Wedge EA$107.00 J0038DL Drinkwater Mouthgag Left EA$22.00 J0038DR Drinkwater Mouthgag Right EA$22.00 J0038F Frick'S Oral Speculum EA$27.00 J0038JM JorVet Equine Mouth Gag EA$699.00 J0038KPB Spare Rubber Block for Pony EA$25.50 J0038M Meier Equine Dental Wedge EA$67.00 J0038ML Millenium Equine Mouth EA$399.00 J0038MPS Mc Pherson Mouth Gag S/S EA$365.00 J0038MPSP McPherson Mouth Gag-Pony Size EA$354.00 J0038S Schoupe Eq Dental Wedge EA$60.00 J0038ZM Meister Equine Mouth Gag EA$840.00 J0040EK Equine Trocar / Cannula EA$143.00 J0040F Corkscrew Trocar Plastic EA*$7.20 J0040OM Oval Bloat Trocar Metal Handle EA$18.00 J0040RT Round Bloat Trocar (2 cannulas EA$21.00 J0041A Carnivore Dental Elev/Small EA$54.00 J0041B Carnivore Dental Elev/Medium EA$54.00 J0041C Carnivore Dental Elev/Large EA$54.00 J0041CC X Long Cross Cut Burr EA$24.00 J0041CR Crossley Rabbit Incisor Luxator EA$45.00 J0041E Columbia Curette Dbl. End EA$24.00 J0041EA Columbia Curette Dbl. End EA$24.00 J0041ES McCall Dental Scaler DBL End EA$14.00 J0041F Mc Calls Curette Dbl. End EA$24.00 J0041GF Molar Rasp Fine EA$62.00 J0041J Jacquette Scaler Dbl. End 2. 3ss EA$24.00 J0041JA Jacquette Scaler Dbl. End 6. 7ss EA$24.00 J0041JF Feline Fine Jacquette 11. 12EA$14.00 J0041JFS Feline Fine Jaquette EA$14.00 J0041JS Jacquette Supragingival Scaler EA$14.00 J0041K Kit- Basic Dental Prophy EA$105.00 J0041MC Rodent Molar Cutter EA$48.00 J0041MD Double Ended Mirror EA$23.00 J0041MDS Double Ended Mirror EA$23.00 J0041ME Rodent Molar Extractor EA$48.00 J0041MI Dental Mirror 22mm EA$10.50 J0041MID Dental Mirror Double Ended EA$23.00 J0041MIDS Dental Mirror Dble Ended EA$14.00 J0041MIS Dental Mirror Silicon Blue EA$14.00 J0041MR Crossley Molar Luxator EA$45.00 J0041R Molar Rasp - Rabbits EA$42.00 J0041RF Molar Rasp Fine-Diamond EA$102.00 J0041RK Rabbit Burr Kit3PK$110.00 J0041RKR Round Burr Only for J0041RK EA$21.00 J0041RKTS Taper Side Cut Burr 2.3mm EA$21.00 J0041SS Diamond Disc Safety Shield EA$124.00 J0041ST Soft Tissue Protector EA$98.00 J0041T Autoclaveable Double Layer EA$165.00 J0042Equine Molar Cutter EA$190.00 J0042A K-9 Tartar Scraper Triangular EA$5.70 J0042B K-9 Tartar Scraper Dbl Ended EA$21.00 J0042BS Dog Tartar Scraper DBL End EA$14.00 J0042D Dental Extractor Forceps EA$23.00 J0042E Dental Extractor Forceps EA$22.50 J0042F Dental Extractor Forceps EA$23.00 J0042G Dental Extractor Forceps EA$23.00 J0042H Pig Tooth Nipper EA*$23.00 J0042HS Pig Tooth Nipper S/S EA*$10.50 J0042J Dental Tartar Scraper #6EA$4.50 J0042K Equine Small Dental Forceps Set EA$92.00 J0042M Dental Scraper And File EA$7.50 J0042Q Dental Explorer/Measuring Prob EA$27.00 J0042QF Feline Fine Explor / Measuring EA$14.00Page 4J0042QFS Feline Fine Explorer / Probe EA$14.00J0042QS Silicon Dental Explorer /EA$14.00 J0042R Feline Dental Extractor EA$40.50 J0042S Subgingival Curette EA$15.00 J0042T Feline Dental Extractor EA$33.00 J0042W Double End Small Elevator EA$34.50 J0042WS Feline 2mm Dble Ended Elevator EA$14.00 J0042X Dental Root Tip Pick EA$20.25 J0042Y Double End Elevator 4mm EA$33.00 J0042YS Double End Elevator 4mm Silicone EA$14.00 J0043Equine Molar Forceps EA$90.00 J0043AB Burgess Wolftooth Set EA$113.00 J0043ABN Burgess Wolftooth Set Gen II EA$124.00 J0043B Short/Narrow Jaw Molar Extract.EA$180.00 J0043BM Short / Narrow Mini Equine EA$140.00 J0043H Wolftooth Extractor EA$52.00 J0043M Dental Elevator Medium EA$15.00 J0043RL Reynolds Tooth Ext Lower EA$94.00 J0043RU Reynolds Tooth Ext Upper EA$94.00 J0043S Dental Elevator Small EA$13.80 J0043W Wolftooth Elevator EA$25.50 J0043WB Wolftooth Elevator Blade EA$14.25 J0043X Equivet Cap Forceps W/ Flexible EA$228.00 J0043Y Wolftooth Elevator Set EA$99.00 J0043Z Burgess Wolftooth Elevator and Extractor EA$240.00 J0044Equine Humane Twitch EA$17.40 J0044A Equine Chain Twitch EA$53.00 J0044B Equine Nylon Twitch EA$52.00 J0045Set- Diagnostic EA$184.00 J0045A Otoscope EA$162.00 J0045AD1Otoscope Bulb EA$23.00 J0045AD4CONE (6MM X 80MM)EA$9.75 J0045AD5CONE (4MM X 80MM)EA$10.50 J0045AD6CONE (5MM X 58MM)EA$10.50 J0045D1BULB FOR OTOSCOPE EA$18.00 J0045D3D BULB OPTHALMOSCOPE EA$23.00 J0045D4CONE (6MM X 80MM)EA$9.75 J0045D5CONE (4MM X 80MM)EA$10.50 J0045D6CONE (5MM X 58MM)EA$10.50 J0046A Casey Classic Dog Collar 7.5cm10*$42.75 J0046AC Classic Transparent Collar 7.510$27.00 J0046B Casey Classic Dog Collar 10cm10*$25.65 J0046BCC Plast. Bird Collar 14Cm10$29.50 J0046C Casey Classic Dog Coll. 15Cm10*$34.20 J0046D Casey Classic Dog Coll. 20Cm10*$45.60 J0046DC Classic Transparent Collar 20cm10$49.80 J0046E Casey Classic Dog Coll. 25Cm10*$52.70 J0046F Casey Classic Dog Coll. 30Cm10*$65.55 J0046G Casey Classic Dog Coll.12.5Cm10*$31.35 J0046HC Classic Transparent Collar 40cm10$148.00 J0046J Classic Dog Collar 35cm10$122.00 J0046JC Classic Transparent Collar 35cm10$148.00 J0046R Rack for Dog Collars EA$204.00 J0046S Dog Collar Set 7 Sizes SET*$37.50 J0047JorVet Aural Hematoma Pad EA$6.00 J0047A Casey Clear Collar 7.5Cm10*$26.00 J0047B Casey Clear Collar 10Cm10*$25.65 J0047C Casey Clear Collar 15Cm10*$35.00 J0047D Casey Clear Collar 20Cm10*$42.75 J0047E Casey Clear Collar 25Cm10*$51.30 J0047EC Comfort Collar 25cm5PK$44.00 J0047F Casey Clear Collar 30Cm10*$62.70 J0047G Casey Clear Collar 12.5Cm10*$31.35 J0047RC Rodent & Rabbit Collar 5cm10$22.50 J0047UCA Under Construction Dog Collar10$28.60 J0049B Behney Ear Instrument EA$45.00 J0049C Wire Cutter EA$21.90 J0049F Buck Ear Curette Straight-Econ EA$12.00 J0049FG Buck Ear Currette Straight EA$18.00 J0049G Buck Ear Curette Curved EA$12.00 J0049HB Straight Ear Clamp 4"EA$45.00Page 5J0049HC Curved Ear Clamp 5"EA$80.00J0049HD Straight Ear Clamp 5"EA$46.00 J0049LT Laboratory Eartags100$45.00 J0049LTA Eartag Applicator EA$97.00 J0049LTAD1Spring & Screw for Applicator EA$7.50 J0049MA Schnauzer Ear Trim Clamp EA$39.00 J0049MB Boxer Ear Trim Clamp EA$39.00 J0049MC Doberman Ear Trim Clamp EA$39.00 J0049MD Great Dane Ear Trim Clamp EA$39.00 J0049ME Boston Terrier Ear Trim Clamp EA$39.00 J0049MS K-9 Ear Trim Clamp Set5PK$180.00 J0049P Billeau Ear Curette EA$25.50 J0049S Earcrop Cartilage Scissors EA$30.00 J0049WA Implants 2"6PK$24.00 J0049WB Implants 2 1/2"6PK$24.00 J0049WD Implants 3 1/2"6PK$24.00 J0049WE Implants 4"6PK$24.00 J0049X Martin Cartilage Scissors 8"EA$67.50 J0050A Danish Iv Ndle 14 Ga W/Case EA$25.50 J0050B Danish Iv Ndle 11 Ga W/Case EA$27.00 J0051A Canine Mouth Gag Small EA$15.75 J0051B Canine Mouth Gag Medium EA$16.50 J0051C Canine Mouth Gag Large EA$17.10 J0051D1RUBBER INSERTS FOR K-9 MOUTH PR$3.90 J0051F Feline Mouth Gag EA$18.00 J0051FD Plastic Inserts - Pair PR$3.90 J0051G Nazzy Ferret Mouth Gag EA$37.50 J0051H Nazzy Ferrett Gag - Large EA$40.00 J0051K Feline Stomach Tube Spec.EA$10.50 J0051M Canine Stomach Tube Spec.EA$10.50 J0051N Lge K-9 Stom.Tube Speculum EA$11.25 J0051Q Dental Wedge Small EA$21.75 J0051R Dental Wedge Large EA$21.75 J0051RDL Rodent Cheek Dilator - Large EA$21.00 J0051RDLX Cheek Dilator-Long EA$21.00 J0051RDS Rodent Cheek Dilator - Small EA$35.00 J0051RG Rodent Mouth Gag EA$75.00 J0051RGS Lightweight Rodent Mouth Gag EA$60.00 J0051RK Rabbit/ Rodent Dental Starter EA$200.00 J0051RR Dental Tooth Rasp EA$60.00 J0051RS Rodent Dental Spatula EA$24.00 J0051S Set- Avian Oral Spec. /3EA$64.00 J0051SBA Smith-Baxter Mouth Gag Sm EA$15.00 J0051SBB Smith-Baxter Mouth Gag Medium EA$15.00 J0051SBC Smith-Baxter Mouth Gag Lg EA$18.00 J0051SBD Smith-Baxter Mouth Gag Xl EA$21.00 J0051SBS Smith-Baxter Mouth Gag Set EA$66.00 J0051X Sm.Avian Oral Speculum EA$19.00 J0051Y Medium Avian Oral Speculum EA$22.00 J0051Z Large Avian Oral Speculum EA$26.00 J0052K Killian K-9 Vaginal Speculum EA$21.00 J0052P Polansky Vaginal Speculum EA$95.00 J0052T Equine Thorobred Vag.Speculum EA$70.00 J0053D01Rear Grip Roux Syringe EA$36.00 J0053D01B Rear Grip 10cc Roux Syringe EA$33.00 J0053D06Spring Holding Screw Roux EA$0.60 J0053D07Handle Connect/Screw Roux EA$6.45 J0053D13GUDGEON BOLT ROUX SYRINGE EA+$1.35 J0053D14Ratchet Tip Roux Syringe EA$6.00 J0053D18COMPRESS. SPRING ROUX EA+$0.45 J0053D20B DOSAGE WHEEL 10CC ROUX EA$6.00 J0053D24Front End & Ll 30/50cc Roux EA$12.00 J0053D24B ENDPLA.W/LUERLOCK 10CC ROUX EA$21.00 J0053D25Washer Set Roux Syringe EA+$3.30 J0053D25B WASHER SET 10CC ROUX EA$3.30 J0053D26ROUX GLASS BARREL 50CC EA$4.95 J0053D26A GLASS BARREL 30CC ROUX EA$4.95 J0053D26B Glass Barrel 10cc Roux EA$4.95 J0053D26P Plastic Barrel 50cc Roux EA$6.00 J0053D26R Barrel W/Ll 50cc Roux EA$10.50 J0053D27Metal Frame 50cc Roux EA$15.00Page 6J0053D27A METAL FRAME 30CC ROUX EA$15.00J0053D27B METAL FRAME 10CC ROUX EA$14.70 J0053D28Inner Rod 50cc Roux EA$9.00 J0053D28A INNER ROD 30CC ROUX EA$9.90 J0053D28B INNER ROD 10CC ROUX EA$9.90 J0053D30Rubber Piston Roux 30/50cc EA+$2.70 J0053D30B RUBBER PISTON 10CC ROUX EA$3.30 J0053D31DISC FOR PISTON 30/50CC ROUX EA$1.80 J0053D31B DISC FOR PISTON 10CC EA$3.30 J0053D32Outer Rod 50cc Roux EA$12.00 J0053D32A OUTER ROD 30CC ROUX EA$12.00 J0053D32B OUTER ROD 10CC ROUX EA$12.00 J0053D33Knurled Knob Roux Syringe EA$6.60 J0053D35SPRING FOR HANDLES EA$4.05 J0053D36DOSAGE WHEEL MINIDOSE 30CC EA$9.00 J0053D37OUTER ROD MINIDOSE 30CC EA$4.50 J0053D42Henke Set Screw EA$3.35 J0053D43HENKE STEEL BALL 4MM EA$1.95 J0053D44HENKE BALL SPRING EA$2.10 J0053D45HENKE REAR HANDLE COMPLETE EA$49.50 J0053D49HENKE DOSAGE WHEEL EA$21.00 J0053D51Henke Ratchet Clip EA$3.00 J0053D52Henke Ratchet Screw EA$3.00 J0053D53HENKE FORWARD HANDLE COMPLETE EA$42.00 J0053D54HENKE ROUX REPAIR KIT EA$24.00 J0053D55HENKE ROUX DOSAGE REPAIR KIT EA$19.50 J0053D56HENKE ROUX PLUNGER ROD REPAIR K EA$30.00 J0053DMD8Screw Cap EA$12.00 J0053F91Ferromatic Syringe 5cc M19EA$119.00 J0053FD02M FERROMATIC BARREL 5CC M86EA$9.90 J0053FD04WASHER PISTON FERROMATIC EA$3.00 J0053FD08DOSING DEVICE FERROMATIC EA$9.00 J0053FD08M FERROMATIC DOSING DEVICE M86EA$4.50 J0053FD12RUBBER VALVE FERROMATIC EA$3.00 J0053FD13OUTLET VALVE SPRING FERROMATIC EA$4.50 J0053FD1391Outlet Spring Valve M91EA$2.60 J0053FD14G VALVE HEAD NON-COLL BTTLE M91EA$39.00 J0053FD14V91Valve Screw EA$6.00 J0053FD15CLOSING CAP FERROMATIC EA$9.00 J0053FD19Screw Cap Ferromatic EA$4.50 J0053FD191FRAME M91 (Same as J 53VD 1M)EA$27.00 J0053FD19M Screw Cap - 07EA$12.00 J0053FD21CLOSING CAP FERROMATIC 5CC EA$7.50 J0053FD2291FRONT PIECE M91EA$35.00 J0053FD23LUERLOCK ADAPTOR EA$4.50 J0053FD27Piston Rod Assm. 3 4 5 6 Ferr EA$34.00 J0053FD28Rep.Kit 4 10 12 13 16 17 18 20EA$24.00 J0053FD2891Kit 91 Repair Ferromatic EA$33.00 J0053FD3291ATTACHMENT M91EA$6.00 J0053FD391PISTON M91EA$5.50 J0053FD591PISTON ROD & HANDLE M91EA$10.50 J0053FD691Ferromatic Front Screw EA$27.00 J0053FD791GUIDING CAP M91EA$6.00 J0053FD891DOSING DEVICE M91EA$6.00 J0053FD991FIXING NUT M91EA$3.60 J0053FM18Ferromatic Syringe 5cc M19EA$124.00 J0053FMD1Barrel Frame EA$25.00 J0053FMD10Washer EA$2.80 J0053FMD11Valve with Washer EA$6.00 J0053FMD12Valve Spring EA$2.40 J0053FMD13Front Part Luer Lock EA$26.00 J0053FMD14Washer EA$2.20 J0053FMD15Adaptor Plastic Bottles EA$41.00 J0053FMD16Washer EA$2.80 J0053FMD17Valve Screw EA$14.00 J0053FMD18Fixing Screw EA$19.60 J0053FMD19Closing Cap EA$6.00 J0053FMD2Screw for Front Part EA$19.00 J0053FMD20Washer EA$1.20 J0053FMD21Washer EA$1.30 J0053FMD22Adaptor Glass Bottles EA$41.00Page 7J0053FMD23Screw EA$13.00J0053FMD24Rubber Valve EA$3.10 J0053FMD25Valve Spring EA$2.80 J0053FMD26Valve Spring EA$2.80 J0053FMD27Universal Bottle Holder EA$18.00 J0053FMD28Universal Bottle Adaptor EA$2.40 J0053FMD29Universal Bottle Adaptor EA$2.40 J0053FMD2M Glass Barrel EA$9.55 J0053FMD30Gasket EA$1.40 J0053FMD31Spare Part Kit -EA$24.60 J0053FMD4Piston Rod EA$19.00 J0053FMD5Compressing Spring EA$2.80 J0053FMD6Dosing Sheath EA$12.00 J0053FMD7Fixing Nut EA$9.00 J0053FMD8Screw Cap EA$12.00 J0053FMD9Piston EA$14.00 J0053H Henke Roux Syringe 50cc EA*$64.00 J0053HA30cc Henke Roux Syringe EA*$61.50 J0053HB10cc Henke Roux Syringe EA*$68.00 J0053HFE50CC Roux Flexible Extension EA$64.00 J0053HRE50CC Roux Syringe Extension -EA$104.00 J0053V94Vetamatic 5cc Syringe 94EA$95.00 J0053VD01M METAL FRAME EA$30.20 J0053VD03M WASHER M86 & M91EA$2.60 J0053VD04M GLASS BARREL M86 & M91EA$9.90 J0053VD06SPRING SLEEVE EA$4.50 J0053VD07M VETAMATIC SPRING M86EA$6.00 J0053VD08M VETAMATIC DOS.SCRW. & TUBE M86EA$8.00 J0053VD09M VETAMATC DOSE FIXING NUT M86EA$5.40 J0053VD1094Screw Cap EA$6.00 J0053VD10M Vetamatic Screw Cap M86EA$4.20 J0053VD1294Piston W/Hole EA$4.50 J0053VD1494VALVE AND WASHER EA$6.60 J0053VD1794Front End EA$18.00 J0053VD17M VETAMATIC FRONT END M86EA$21.00 J0053VD22SINKER EA$4.50 J0053VD23TUBING EA$6.00 J0053VD24A Filler Needle 4 3/4"EA$21.00 J0053VD24B Filler Needle 7 1/2"EA$19.50 J0053VD24C Filler Needle 8.5"EA$21.00 J0053VD26Screw Cap Vetamatic M91EA$12.00 J0053VD28REPAIR KIT VETAMATIC EA$21.00 J0053VD2894REPAIR KIT EA$21.00 J0053VD28M VETAMATIC REPAIR KIT M86EA$24.00 J0053VD294Front Screw EA$10.50 J0053VD594PISTON ROD EA$28.00 J0053VD794COMPRESSION SPRING EA$3.60 J0053VD894DOSING SHEATH EA$6.00 J0053VD994FIXING NUT EA$2.40 J0054KA Kit - Castration # 10EA*$6.20 J0054KC Kit - Castration #12EA*$6.20 J0054KE Kit Castration #20 Blade EA*$7.60 J0054KF Kit Castration #21EA*$7.60 J0054KG Kit Castration #22 Blade EA*$7.60 J0054SA Scalpel Blade #10100*$49.00 J0054SB Scalpel Blades #11100*$49.00 J0054SC Scalpel Blades #12100*$49.00 J0054SD Scalpel Blades #15100*$49.00 J0054SE Scalpel Blades #20100*$49.00 J0054SF Scalpel Blades #21100*$49.00 J0054SG Scalpel Blades #22100*$49.00 J0055A Scalpel Blade Handle #3EA*$3.00 J0055B Scalpel Blade Handle #4EA*$3.30 J0055DA Disposable Scalpel #1010*$18.50 J0055DB Disposable Scalpel #1110*$18.50 J0055DC Disposable Scalpel #1210*$18.50 J0055DD Disposable Scalpel #1510*$18.50 J0055DE Disposable Scalpel #2010*$18.50 J0055DF Disposable Scalpel #2110*$18.50 J0055DG Disposable Scalpel #2210*$18.50 J0055GA German Scalpel Hdle #3EA$7.50Page 8J0055GB German Scalpel Hdle #4EA$7.50J0055PA Scalpel Hdl. Plastic #3EA$4.60 J0055PB Scalpel Hdl. Plastic #4EA$4.60 J0056Disp Sterile Umbilical Clamp EA$3.00 J0056B Umbilical Clamps50$22.00 J0056G Umbilical Hernia Clamp 14Cm EA$46.00 J0056HA Huston Umbl Clamp 5"EA$9.90 J0056HB Huston Umbl Clamp 7"EA$11.70 J0057Medium Grit Carbide Float Blade EA$115.00 J0057C Carbide Float Blade- Coarse EA$116.00 J0057F Carbide Float Blade EA$130.00 J0057S Short Carbide Float Blade EA$99.00 J0057SF Carbide Short Blade - Short EA$80.00 J0058CT Curved Float Blade T/C EA$37.50 J0058FT Flat Float Blade T/C EA$25.50 J0058HA Angle Shaft Less Blade EA$18.00 J0058HC House Float Comb. L/Blade EA$54.00 J0058HH Handle Only EA$21.00 J0058HQ Float With Hdle & Str Shaft EA$36.00 J0058HS Straight Shaft Less Blade EA$18.00 J0058HZ Float Handle & Angle Shaft EA$36.00 J0058L Universal Dental Float 26"EA$89.00 J0058P Proctor Dental Float EA$53.00 J0058S Universal Dental Float 20"EA$77.00 J0061B Technovit Wooden Blocks EA$1.80 J0061BH Hoof Blocks 3/4"EA$1.50 J0061BQ Hoofblock Orange EA$2.40 J0061BX Technovit Plastic Block EA$3.60 J0061LA Technovit Liq. 240CC EA*$22.80 J0061LB Technovit Liq 480CC EA*$35.70 J0061PA Technovit Pwdr. 500 gm EA*$49.00 J0061PB Technovit Pwdr. 1000gm EA*$92.00 J0061SL Cow Boot - Left EA$6.60 J0061SR Cow Boot - Right EA$6.60 J0061T12Kit - Technovit 12EA*$121.00 J0061T12H Technovit 12 Treatment Kit EA*$103.00 J0061T12W Technovit 12 Treatment Kit EA*$103.00 J0061T6Technovit 6 Treatment Kit EA*$73.00 J0061T6H Tech 6 Treatment Kit w/ Sm Wood EA*$59.50 J0061T6S Technovit 6 Treatment Kit W/EA*$70.50 J0061T6W Technovit 6 Treatment Kit EA*$66.40 J0061XL Smart Block Gray Left EA$5.90 J0061XR Smart Block Green Right EA$5.90 J0062S French Model Roaring Burr EA$18.90 J0062ST Strawberry Roaring Burr EA$30.00 J0063IV Set Funnel Style EA$11.40 J0063D1IV Latex Surgical Tubing 50Ft EA$43.00 J0063D1A I.V. Latex Tubing 50Ft EA$34.50 J0063D1B I.V. Latex Tubing 50Ft EA$56.00 J0064BL 5 Gal. IV Bag W/Adapt. 20L.EA$24.60 J0064SL Set- Complete IV 20L.EA$45.90 J0064T Willoughby Tubing EA$30.00 J0064TL Tubing Only W/Adapt.EA$30.00 J0065M Disp. Trans. & Infusion Set EA$3.75 J0067Pet Pill Dispenser DZ$14.40 J0068Eyelid Retractor EA$30.00 J0068B Barraquer Eyelid Speculum EA$37.50 J0068D Chalazion Forceps EA$18.00 J0068G Graefe Eyelid Speculum EA$15.00 J0068GW Graefe Eyelid Speculum EA$56.00 J0070C Mosquito Forceps Curved EA*$5.75 J0070CW Mosquito Forc.German Cvd EA$27.00 J0070S Mosquito Forceps Straight EA*$5.75 J0070SW Mosquito Forc German Str EA$27.00 J0071C Kelly Forceps Curved EA*$5.75 J0071CW Kelly Forc German Cvd EA$24.00 J0071S Kelly Forceps Straight EA*$5.75 J0071SW Kelly Forc German Str EA$25.00 J0072C Crile Forceps Curved EA*$6.80 J0072CW Crile Forc German Cvd EA$26.40 J0072DV DeBakey Vascular Clamp 23cm EA$272.00Page 9J0072RO Rochester-Ochsner Forceps Economy curved EA$7.50J0072ROW Rochester Oschner Forceps German Cvd EA$29.70 J0072RS Rochester Oschner Forceps Economy Straight EA$7.50 J0072RSW Rochester Oschner Forceps German Straight EA$31.00 J0072S Crile Forceps Straight EA*$6.80 J0072SW Crile Forc German Str EA$24.00 J0073C Ferguson Angiotribe Curved EA*$15.00 J0073CW Ferguson Angiotribe Curved EA$60.00 J0073S Ferguson Angiotribe Straight EA*$15.00 J0073SW Ferguson Angiotribe Straight EA$75.00 J0074A Bandage Scissors 5 1/2"EA*$6.00 J0074B Bandage Scissors 7 1/2"EA*$9.00 J0074HB Heavy Duty Cast/Band.Scissors EA$51.00 J0074WA Bandage Scis German 5 1/2"EA$28.50 J0074WB Bandage Scis German 7 1/2"EA$32.30 J0074X Knowles Bandage Scissors EA$27.00 J0075A Surg Scissors Curved S/B 5.5"EA*$5.35 J0075AW German Surg Sciss Cvd S/B 5.5"EA$22.00 J0075B Surg.Scissors Curved B/B 5.5"EA*$5.35 J0075BW German Surg Scissors Curved EA$22.00 J0075C Surg.Scissors Str. S/B 5.5"EA*$5.35 J0075CMW Metzenbaum Curved EA$30.40 J0075CMWL Metzenbaum Scissors Curved 7" -EA$55.00 J0075CW German Surg Scis Str S/B 5.5"EA$22.00 J0075D Surg.Scissors B/B Straight 5.5:EA*$5.35 J0075DW German Surgical Scissor Straigh EA$22.00 J0075E Surg.Scissors S/S Straight 5.5"EA*$5.35 J0075EW German Surg Sciss St. S/S 5.5"EA$22.00 J0075F Surg.Scissors Curved S/S 5.5"EA*$5.35 J0075FW German Surg Scis Cvd S/S 5.5"EA$22.00 J0075IWC Iris Scissors Curved EA$22.80 J0075IWS Iris Scissors Straight EA$22.80 J0075N Postmortem Scissors 7 3/4"EA$38.00 J0075SMW Metzenbaum Straight EA$30.00 J0075SMWL Metzenbaum Scissors Straight 7"EA$53.00 J0075TB Stevens Tenotomy Scissors Str EA$27.90 J0075TS Stevens Tenotomy Scissors Str EA$28.00 J0075U Universal Scissors Black EA*$10.00 J0075UBL Universal Scissors Blue EA$10.00 J0075UG Universal Scissor Green EA$10.00 J0075UMB Umbilical Scissor EA$7.00 J0075UR Universal Scissor Red EA$10.00 J0075US Universal Lister EA$9.75 J0075UY Universal Scissor Yellow EA$10.00 J0076Stitch Scissor EA*$5.40 J0076SW Germ Spencer Stitch Scissor EA$28.00 J0076W German Stitch Scissors EA$29.00 J0077AC Mayo Scissor Cvd EA*$8.25 J0077AS Mayo Scissor Straight EA*$8.25 J0077BC Mayo Scissor Serrated Cvd EA*$8.90 J0077BS Mayo Sciss. Serrated Straight EA*$8.90 J0077CWA Mayo Scis Cvd 5 1/2" German EA$24.70 J0077CWAL Mayo Scissors Curved 5.5" -EA$72.00 J0077CWB Mayo Scis Cvd 7"German EA$25.80 J0077SWA Mayo Sciss Str 5 1/2" German EA$22.80 J0077SWAL Mayo Scissors Str. 5.5" -EA$69.00 J0077SWB Mayo Scis Str 7"German EA$24.70 J0078A Mayo Hegar Needle Holder 6"EA$9.00 J0078B Mayo Hegar Needle Holder 7"EA$12.00 J0078WTA Mayo Hegar T/C 6"Ndle Hlder EA$96.00 J0078WTB Mayo Hegar T/C 7"EA$84.00 J0078X Crile-Wood Needle Holder EA$54.30 J0079A Olsen Hagar Needle Holder 6"EA$12.80 J0079B Olsen Hegar Needle Holder 7"EA$14.80 J0079WTA Olsen Hegar T/C 5 1/2" N.H.EA$96.00 J0079WTB Olsen Hegar T/C 6 1/2" N.H.EA$99.00 J0079WTBL Left Hand Olsen-Hegar Needle EA$150.00 J0079WTD Olsen Hegar T/C 7 1/2"EA$102.00 J0079WTXL Extra Long Needle Holder T/C EA$260.00 J0080Mathieu Needle Holder EA$16.40 J0080A Allis Tissue Forceps 6"EA$10.00Page 10J0080AW Germ. Allis Tissue 6"EA$27.00。
皂皂美
南娜精油手工皂LAGUNASUD纯手工天然植物精油手工皂共29款，每一款针对相应的肌肤问题，都是独立的铁盒装，里面所含有的天然甘油量及植物精油是普通香皂的5倍以上，可直接用于面部和周身肌肤清洁护理。
孕妇和宝宝都可以使用。
好用而不贵！你值得拥有南娜手工皂参数规格：100ml保质期：三年系列：古皂系列、植物系列、水果系列、限量款植物系列南娜大马士革玫瑰纯手工植物精油皂是世界公认的优质玫瑰品种,其中对人体有效成分高达130多种.南娜大马士革玫瑰润颜皂,富含玫瑰精油、芦荟胶、玫瑰果油、葡萄籽油和25%以上的纯植物甘油。
纯植物成分,不禁对皮肤无刺激,更将深层清洁与滋润完美结合,多种精油的完美搭配,深层渗透,自然体香,适合面部、收不及身体的清洁与护理,亦用于面部卸妆,剃须前润滑。
南娜薰衣草纯手工植物精油皂舒缓肌肤、抗菌消炎、促进细胞再生、淡化疤痕、祛粉刺修复受损肌肤、护肤莹润透白。
南娜薰衣草手工精油皂采用进口法国普罗旺斯薰衣草制成的精油,并含有多种纯植物成分,精油皂内有丰富花瓣、芳香四溢、使您沉醉于最天然的spa养肤中,以天然方式使肌肤回归初生之美。
南娜茶树精油皂消炎抗敏的绝佳利器,深入清洁肌肤至毛囊,彻底清除肌肤油脂及污垢,改善因毛孔堵塞及油脂分泌过剩导致的痘痘、粉刺,同时调理油脂分泌至平衡状态,长期使用让肌肤恢复健康净洁状态。
南娜茶树精油皂蕴含丰富茶树精油、乳木果精油、橄榄油等多种植物精油,在深层清洁肌肤的同时保持肌肤水润光泽。
南娜竹炭纯手工植物精油皂是手工皂的一个分类产品,是基于手工皂酿造基础做出的配方改革,主要成分竹炭粉,甘油,橄榄油,甜杏仁油,棕榈油,天然植物油,多种本草植物萃取精华。
秘制配方配制而成的新型手工皂。
竹炭具有超强分解、吸附力能深层清洁毛孔内的污物,竹炭中蕴含丰富矿物质渗入细胞,有效恢复细胞活动和毛囊的正常。
竹炭负离子强效分解黑头细菌,抑制有害微生物,成功去除黑头恢复毛孔健康平滑。
有效去除暗哑死皮,疏通毛孔,补充营养,中和化解肌肤深层郁积的污垢,改善黑头,增强后续保养成分的吸收。
去渍介绍Laundry Ongoing Training Session
去渍产品介绍及注意事项BON GO(饮料渍去除剂)使用方法：为了达到最佳效果，使用前尽可能保持织物干燥干洗：干洗前或后，把本品滴在污渍处，用刮板刮或刷子刷直至污渍分解，再用水或蒸汽冲洗，对于重污或难洗的污渍，需要的话可再重复一次。
水洗：在清洗之前，用本品浸透有污渍的部分，同时用刷子刷，把本品渗入10分钟以上，然后再按一般洗涤方法清洗。
清洗地毯：用本品少量滴于污渍处，并用刮板刮至污渍分解，然后尽量吸出本品，再用地毯香波清洗。
本品适用的织物和颜色须不受水或蒸汽的影响。
QWIK GO（食品渍去除剂）用于去除血渍、奶渍、食物渍以及红药水等使用法：为了达到最佳的使用效果，在使用前尽可能保持干燥。
干洗：干洗之前或之后，把本品滴在污渍处，用刮板刮或刷子刷（除了血渍、红药水外，用蒸气枪加热会更有帮助）当污渍分解之后，再用水或蒸气冲洗，对于重污或难洗的污渍，需要的话再重复一次。
水洗：在清洗之前，用本品滴在污渍处同时用刷子刷直至污渍去除，然后再按一般洗涤方法清洗。
清洗地毯：用本品滴于污渍处，并用刮板刮至污渍分解，然后再用地毯香波清洗。
YELLOW GO（染色渍去除剂）可去除任何颜色的污渍及墨渍等使用方法：（1）：洗衣机内水洗：开始洗涤前必须确保洗衣机的洗涤剂加料口清洁，彻底清洗滚桶后，在滚筒内注入热水，加入平时所用量3倍的酸剂，工作5分钟过净，再加入热水，在洗衣机转动时加入本品（1加仑加1盎司本品，对难除的污渍1加仑水可加2盎司的本品，加热本品溶液可以加强去污能力，需要的话可加至沸腾）洗至污渍去除。
然后彻底清洗衣物缸，在按一般洗涤程序投料清洗。
YELLOW GO（染色渍去除剂）可去除任何颜色的污渍及墨渍等使用方法：（2）洗衣机外水洗：开始洗涤之前，先用38℃的水清洗织物，然后把他放在一边，在一个干净的塑料或不锈钢容器中，准备足够的溶液以使织物可以自由漂动，（每加仑38℃的水加1盎司本品，对顽固的污渍，每加仑水中可多加1盎司的本品，加热本品溶液可加强去污力，需要的话可加热至沸腾）。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Why is this task important for you and our guests?
为什么这项工作对你和我们的客人都很重要？
Answers:
1.I understand the importance of washing items with care.
我明白洗衣仔细清洗的重要性。
2.It is my responsibility to ensure guests have confidence in our department’s ability and rely on us for future
use.
确保客人对我们部门的能力有信心，以及将来信任我们是我们的责任。
3.This can increase our GSTS.
这将提高我们的顾客满意度调查的分数.
4.If we do our job well, this shows that we are professional.
如果我们工作做好了，可以显示出我们很专业。
Summary questions
问题总结：
1.What is important for washing Laundry?
洗涤的重要性是什么？
2.Why do you have to separate different garments?
为什么衣物要分类？
3.Do stains need special treatment?
污渍需要特别处理吗？
4.Why is spot cleaning considered a more professional treatment?
为什么污渍需要更专业的来处理？
5.Is it important to use a Laundry net for small items? Do you include socks in this?
为什么小件衣物使用洗衣网袋很重要？里面包含袜子吗？
6.What is the temperature for drying?
晾干的温度是多少？
7.Are there different pressing methods?
熨烫有不同的方法吗？
8.What is the difference between hang and flat drying?
悬晾和平晾有什么差异？
9.Why do you need to hand wash some items?
为什么你必须要分类手洗？
Now ask the trainee to practice the task from start to end to test competency. 培训回顾。