国巨2014年SGS报告_Sn PLATING
ISO 5817-2014 焊接 — 钢、镍、钛及其合金的熔化焊接头(束焊除外)— 缺欠质量等级.
ISO国际标准化组织EN ISO 5817:2014焊接 — 钢、镍、钛及其合金的熔化焊接头 （束焊除外）— 缺欠质量等级Welding —Fusion-weld joints in steel , nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections替代EN ISO 5817:20072014年8月完成替代〓〓〓TonyJ1．应用范围该国际标准为0.5mm以上钢、镍、钛及它们的合金熔化焊焊缝（束焊除外），提供了一个缺欠质量等级。
包括全熔透、非全熔透对接焊缝和角焊缝。
束焊的缺欠质量等级参照ISO 13919-1。
本标准规定了三个级别的质量等级力求适用于大范围的焊接结构，分别用B、C、D来表示。
B表示最高的质量要求。
涉及几种类型的载荷，例如：静载、热疲劳、腐蚀载荷、压力载荷。
关于载荷的附加说明见附录C。
质量等级涉及生产和良好的工艺。
本标准适用于：a)非合金钢和合金钢b)镍和镍合金c)钛和钛合金d)手工焊，机械焊接和自动焊接e)所有的焊接位置f)所有焊接接头,例如:对接、角接和支管连接g)下面所讲的与国际标准 ISO4063 编号一致的焊接方法11 无气体保护的金属电弧焊12 埋弧焊13 金属气体保护焊14 钨极气体保护焊15 等离子焊31 氧焰气焊(仅针对钢)冶金方面的内容，如晶粒尺寸、硬度不包含在本标准内。
2. 参考标准本文档中全部或部分引用的下列标准文件在应用时是不可或缺的。
过时的引用标准,仅适用引用的版本。
对于未标明日期的标准，采用最新的版本（包括附加文件）。
ISO 6520-1：2007金属材料几何缺陷——第一部分：熔化焊3. 术语与定义本标准采用下列术语与定义3.1 质量等级基于特定缼欠种类、尺寸和数量，对焊缝质量的划分。
3.2 适用性在特定条件下，某个产品、方法或选用于规定目的的能力3.3 短缺欠焊缝长度≥100mm 时，100 mm焊缝长度范围内总长小于25mm,或者3.4 短缺欠焊缝长度＜100mm时，总长小于焊缝长度25%的一个或多个缺欠。
国巨阻规格书
OUTLINES
YNSC088
Fig. 8 Chip resistor outlines
marking layer
overcoat
protective glass
resistive layer (Jumper chip is a conductor) inner electrode termination(Ni/matte tin) inner electrode
3.10 ±0.10
AC1218
3.10 ±0.10
AC2010
5.00 ±0.10
AC2512
6.35 ±0.10
For dimension, please refer to Table 1
APPLICATIONS All general purpose applications
Car electronics, industrial application
FEATURES Comply with AEC-Q200 standard
Superior resistance against sulfur containing atmosphere
(3) PACKAGING TYPE R = Paper/PE taping reel
K = Embossed taping reel
(4) TEMPERATURE COEFFICIENT OF RESISTANCE
– = Base on spec
(5) TAPING REEL
07 = 7 inch dia. Reel 13 = 13 inch dia. Reel
Reduce environmentally hazardous waste
产品国产化证明书
产品国产化证明书尊敬的相关部门及各位合作伙伴：为了明确本公司所生产的产品名称的国产化情况，特提供此证明书。
一、产品基本信息产品名称：产品名称产品型号：产品型号产品规格：详细规格产品用途：简要说明产品的主要用途二、国产化的背景和意义在当前全球经济和科技发展的大环境下，推动产品国产化具有重要的战略意义。
首先，国产化有助于提升我国在相关领域的自主创新能力和技术水平，减少对国外技术和产品的依赖，增强国家的产业安全和经济稳定性。
其次，国产化能够促进国内产业链的完善和发展，带动相关产业的升级和就业增长。
此外，国产化产品往往更能适应国内市场的需求和特点，提供更优质的服务和解决方案。
三、国产化的具体情况1、设计与研发本产品的设计和研发工作完全由我国本土的专业团队完成。
团队成员具备丰富的行业经验和专业知识，在深入研究市场需求和技术发展趋势的基础上，进行了创新性的设计和开发。
采用了先进的设计理念和方法，如具体设计理念和方法，确保产品具有良好的性能和可靠性。
充分考虑了国内用户的使用习惯和需求特点，进行了针对性的优化和改进。
2、原材料与零部件在原材料和零部件的选择上，我们坚持优先选用国产供应商。
通过与国内众多优秀供应商的紧密合作，建立了稳定可靠的供应链体系。
主要原材料包括列举主要原材料，均来自国内知名的生产厂家，其质量和性能符合国家标准和行业要求。
关键零部件如列举关键零部件，也均实现了国产化供应。
这些零部件在经过严格的质量检测和性能测试后，被应用于本产品，确保了产品的整体质量和稳定性。
3、生产制造本产品的生产制造过程在国内完成。
我们拥有先进的生产设备和工艺技术，以及严格的质量控制体系。
生产设备包括列举主要生产设备，均为国内自主研发或引进消化吸收再创新的成果，能够满足产品的高精度和高效率生产要求。
生产工艺采用了具体生产工艺，经过不断的优化和改进，确保了产品的一致性和稳定性。
在生产过程中，严格执行质量标准和检验流程，对每一道工序和每一个产品进行严格检测，确保产品质量符合要求。
PAHs欧盟最新标准2014版
Product Safety Commission (AfPS)GS SpecificationTesting and assessment of polycyclic aromatic hydrocarbons (PAHs) in the course of awarding the GS mark- Specification pursuant to article 21(1) no. 3 of the Product Safety Act (ProdSG) –AfPS GS 2014:01 PAKState of revision: August 4th, 2014Disclaimer: G erman i s t he o riginal t ext v ersion. I n c ase o f a ny d oubt, l ack o f c larity o r a ny o ther n on clear interpretation the content of the original version is valid.Management: Federal Institute for Occupational Safety and HealthFriedrich-Henkel-Weg 1 – 2544149 DortmundTelefon: 0231/9071-0Telefax: 0231/9071-2364 '.Table of ContentsPreliminary observations (3)1 Purpose / Intention (3)2 Basics (3)3 Procedure (3)3.1 Risk assessment (3)3.2 Categorisation (4)3.3 Testing and assessment (6)4 Transitional regulations/periods (6)4.1 GS mark certificates, issued from July 1st, 2015 onwards (6)4.2 GS mark certificates, issued before July 1st, 2015 (6)4.3 Reissuing of existing GS mark certificates – exemptions (6)Annex: Testing instructions (8)1 Aim and purpose (8)2 Method (8)2.1 Brief description (8)2.2 Equipment (8)2.3 Chemicals and solutions (8)3 Preparation and execution (9)3.1 Sample preparation (9)3.2 Measuring procedure (10)3.3 Special characteristics (11)Annex: Measuring conditions for gas chromatography (for information) (12)Testing and assessment of polycyclic aromatic hydrocarbons (PAHs) in the course of awarding the GS markPreliminary observationsOn Aug. 4th 2014 the Product Safety Commission (AfPS) has assigned the requirements of PAH testing in the course of GS mark certification as specification according to art. 21 Product Safety Act (ProdSG) para. 1 no. 3. The implementation is achieved by means of this PAH document.1. Purpose / IntentionProducts (pursuant to the Product Safety Act) must comply with legal requirements to avoid health risks, e.g. art. 30 & 31 of the LFBG (Foodstuffs, Consumer Goods and Feedstuffs Code –LFGB), the Prohibition of Chemicals Ordinance, and the art. 3 of the ProdSG (Product Safety Act). This document and, in particular, the testing instructions (see Annex) specify the requirements with respect to the level of PAHs in products. In addition, the document harmonises the testing methodology for assessment by GS bodies.2. BasicsPAH contamination of materials is primarily due to the use of:- PAH contaminated softening oils in rubber and flexible (soft) plastics- PAH-contaminated carbon black as a black pigment in rubber, plastics and paints.PAH contamination has previously been detected not only in rubber but also in various types of plastic, e.g. ABS and PP, and various paints/coatings, as well as in a variety of natural materials.3. ProcedureThe GS body must take the following steps into account both in the process of awarding a new GS mark and within the framework of monitoring existing GS mark certificates:1. Risk assessment2. Categorisation3. Testing and assessment3.1 Risk assessmentThe GS body must carry out a risk assessment and, in doing so, define which relevant contact/grip and operating surfaces of the product are to be considered for testing and which are not, and must make a record of these (this means that the GS body must first specify the contact/grip and operating areas to which the requirements of the PAH document must be applied (specification of PAH relevance)). The risk assessment should be not applied, where appropriate, if the respecti ve “Erfahrungsaustauschkreis” (“Exchange of Experience Group”, EK) has already defined a procedure for the product or product group with regard to the contact/gripand operating surfaces to be tested. A reference to the EK’s definition is to be included in the documentation accordingly.Materials that cannot be accessed or that can only be accessed by using tools need not be assessed, with the exception of samples with a conspicuous odour.In principle, account must be taken of all contact/grip and operating surfaces that can come into direct contact with the skin or that can be put into the mouth during proper or foreseeable use (but not misuse).13.2 CategorisationDepending on the results of the risk assessment, the corresponding product parts are then to be categorised (see Table 1) and to be analysed on their actual PAH content according to the analysis method below. Existing test reports can be taken into account if they are compliant with the “Grundsatzbeschluss” (“principle decision”) ZEK-GB-2012-01 of the ZEK (“Central Exchange of Experience Group”) and the requirements of this PAH document. Categorisation can be dispensed with if the respective ”Erfahrungsaustauschkreis” (“Exchange of Experience Group”, EK) has already defined a categorisation of the contact/grip and operating surfaces for a product or product group. Definitions for products or product groups from the individual EKs are published on the ZLS website2 and apply from the time of publication.Table 1 presents the maximum levels of PAH in product materials, which must not be exceeded. The provisions of this document with regard to the PAH content do not apply if other legislation lays down corresponding or further requirements for the PAH content. This applies only to the material or component/assembly and not to the product as a whole. Materials and parts of the product that are not covered by other legislative provisions must be assessed within the framework of the procedure for awarding the GS mark in accordance with the requirements of the PAH document.It must be ensured that the method of testing can actually achieve the limit of quantification of 0.2 mg/kg for each individual PAH component3.At the same time, method and matrix effects, as well as the measurement uncertainty, the efficiency of extraction and losses during purification must be considered.Based on the findings of the United States Environmental Protection Agency (EPA) (according to the list in the ZEK document 04-11), the total of 18 PAHs (extended substance list of the AtAV, the predecessor committee of the AfPS) only considers PAH components whose level in the material is found to exceed 0.2 mg/kg.1 However, in order to ensure a consistent and appropriate procedure during the awarding of GS mark, it is not generally necessary to analyse all freelyaccessible surfaces. It is this document’s intention to limit the consideration to relevant contact/grip and operating surfac es. It is not expedient to test all product parts or surfaces in order “to be on the safe side”.2 Homepage of ZLS (Central Authority of the Laender for Safety):3 Example: Water-carrying parts in coffee machines that come into contact with foodstuffs (e.g. water, etc.) are subject to the Food and Feed Code legislation and are therefore excl uded from the PAH document’s field of application. However, grip surfaces on the coffee machine must still be assessed accord ing to the requirements of the PAH document.Table 1: Maximum PAH levels to be complied with for the materials in relevant contact/grip and operating surfaces that are to be categorised based on the results of the risk assessment.* Wording “short-term repetitive skin contact” from supplement to REACH annex XVII no. 50 (REGULATION (EU) No 1272/2013)3.3 Testing and assessmentThe testing instructions found in the annex describe the steps of sample preparation, extraction of the PAHs, purification of the extract, identification and quantification; these must be applied uniformly by all laboratories carrying out testing.The GS body assesses the test results and decides whether the GS mark can be awarded in compliance with the other requirements.4. Transitional regulations/periodsFrom July 1st 2015 (issue date of the GS mark certificate), it is compulsory to apply this document when awarding the GS mark to products.The document ZEK 01.4-08 will cease to be valid from June 30th 2015.Since testing for PAH levels in products constitutes an overarching requirement for almost all of the members of all of the ”Erfahrungsaustauschkreise” (“Exchange of Experience Groups”), the following procedure is defined:4.1 GS mark certificates, issued from July 1st 2015 onwards(incl. ongoing procedures that are concluded after July 1st 2015)Compulsory application of this GS specification from July 1st 2015 onwards (exception: see 4.3).4.2 GS mark certificates, issued before July 1st2015Existing GS mark certificates initially remain valid.Within the framework of regular checks to monitor the manufacturing process (at the latest within one year or, in cases where the regular monitoring period is two years, within two years), the requirements under no. 3 of the ZEK (“Central Exchange of Experience Group”) document with regard to the risk assessment must be taken into account, regardless of whether the product was found in the manufacturing facility or not. If, in the process, it is found that the corresponding requirements are not met, the GS mark certificate must be withdrawn immediately. T he ZEK ”Grundsatzbeschluss” (“principle decision”) ZEK-GB-2006-01 must be complied with.4.3 Reissuing of existing GS mark certificates – exemptionsFor the reissuing of an existing GS mark certificate, immediate consideration is not required in the following circumstances:If the company name is changed, new GS mark certificates are usually issued. However, since the product does not change in terms of construction or other properties, and the reissuing of the GS mark certificate is more or less a pure formality, it is not necessary to consider the requirements of the PAH decision until the time of the check which must be performed for the purposes of monitoring the manufacturing process.(Please note: The reissuing of the GS mark certificate does not alter the previously defined periods for carrying out checks on the product’s manufacturing process.)The same applies by analogy when the holder of the GS mark certificate changes address provided none of the product’s properties change and the product does not r equire an additional safety check.The above procedure can also be applied in relation to duplicate certificates (also referred to as OEM certificates). In such cases, a review pursuant to the requirements of the PAH document must strictly be carried out by the time of the next product-manufacturing check according to the periods already defined in the “main certificate” or, at the latest, by December 28th 2015. Monitoring intervals beyond this date are not permissible in such cases.With regard to the OE M certificates and therefore also the “main certificates”, the PAH document – as specified – must be applied by December 28th 2015 at the latest.Annex: Testing instructionsHarmonised method for the determination of polycyclic aromatic hydrocarbons (PAHs) in polymers1 Aim and purposeDetermination of polycyclic aromatic hydrocarbons (PAHs) in polymer samples.2 Method2.1 Brief description2.1.1 Standard methodA representative partial sample is taken of the material and cut up into pieces with a maximum size of 2–3 mm using scissors, wire cutters, etc. Then, 500 mg of the sample is weighed into a container and extracted with 20 ml of toluene (to which an internal standard has been added) for 1 h at 60 °C in an ultrasonic bath. An aliquot is taken from the extract once it has cooled down to room temperature. In the case of polymers (e.g. plastics or rubber products) for which matrix problems arise during the analysis, an additional purification step is carried out using column chromatography. Quantification is performed on a gas chromatograph with a mass-selective detector (GC/MSD) using the SIM method.2.1.2 Method for insufficient quantitiesIf the total mass of material to be analysed is less than 500 mg, one should proceed as follows: Identical materials from the product can be combined and considered as one sample. However, additional product specimens must not be used.If less than 50 mg of material is available for individual samples, these are not tested.If the available mass of chopped-up material is between 50 mg and 500 mg, the sample must be tested according to 2.1.1 and the quantity of toluene converted or adapted in proportion. The actual mass of the sample is to be recorded in the test report accordingly.2.2 Equipment•Ultrasonic bath with a minimum power of 200 W and a bath area of 706 cm2, corresponding to 0.28 W/cm2, without a basket and with an internal or external thermostat•Gas chromatograph with a mass-selective detector2.3 Chemicals and solutions2.3.1 Chemicals•Toluene•Internal standardso Standard 1: Naphthalene-d8o Standard 2: Pyrene-d10 or anthracene-d10 or phenanthrene-d10o Standard 3: Benzo[a]pyrene-d12 or perylene-d12 or triphenylbenzeneAt least three internal standards must be used; these are added to the extraction solvent (toluene).•External standard: 18 PAH substances according to Table 1 or those listed under no. 3.2, as a mix or individually•Petroleum ether•Silica gel•Sodium sulfate2.3.2 Calibration solutionsThe concentrations of the calibration solutions must be chosen so that a three-point calibration covers a working range of 0.1 to 10 mg/kg in the samples. This corresponds to a concentration range of 2.5 to 250 ng/ml in the calibration solutions.3 Preparation and execution3.1 Sample preparationA representative partial sample is taken of the material. The fragments produced by chopping up the samples to be analysed (using scissors, wire cutters, pliers, etc.) should have a maximum size of 2 – 3 mm.3.1.1 Extraction500 mg of the sample is placed in a glass ”Bördelglas” (“vial”). To this 20 ml of tolue ne, previously amended with internal standards, are added. The sample is then extracted for 1 h in the ultrasonic bath at a temperature of 60 °C throughout. For this purpose, the vials are placed or suspended in the ultrasonic bath without using a basket. The vials are then removed, the extract is left to cool to room temperature and shaken briefly, and an aliquot is taken from the extract and measured either directly or following dilution with toluene.3.1.2 Column chromatography extraction stepFor some polymers (e.g. plastic or rubber products), especially those that dissolve well in toluene under the described extraction conditions, it is necessary to clean the extract using adsorption chromatography on silica gel.For this purpose, a clean-up column with “Hahnschliff” (“stopcock”) (approx. 220 mm x 15 mm) is filled with glass wool, 4 g of silica gel and 1 cm of sodium sulfate.The silica gel is deactivated beforehand by adding 10% water (the corresponding volume of water is added to the silica gel in a glass flask, and the mixture is homogenised on the rotaryevaporator for 1 h at standard pressure and room temperature. The silica gel can then be stored in the sealed glass flask at room temperature).The packed column is conditioned with 10 ml of petroleum ether.The aliquot of toluene extract is then evaporated to a volume of approx. 1 ml on the rotary evaporator and poured into the column. The pointed flask is rinsed out with approx. 20 ml of eluent, which is then also transferred to the clean-up column. Elution is performed with 50 ml of petroleum ether. The collected petroleum ether eluate is amended with 1 ml of toluene and evaporated to a volume of approx. 1 ml under a nitrogen stream (e.g. on the TurboVap). This is then made up to a defined volume with toluene, and the extract is analysed by GC-MS.3.2 Measuring procedureThe method of determination to be applied is gas chromatography with a mass-selective detector in the SIM mode.The following 18 PAHs are to be determined:•Naphthalene•Acenaphthylene•Acenaphthene•Fluorene•Phenanthrene•Anthracene•Fluoranthene•Pyrene•Chrysene•Benzo[a]anthracene•Benzo[b]fluoranthene•Benzo[k]fluoranthene•Benzo[j]fluoranthene•Benzo[a]pyrene•Benzo[e]pyrene•Indeno[1,2,3-cd]pyrene•Dibenzo[a,h]anthracene•Benzo[g,h,i]perylene3.2.1 Measuring conditions for gas chromatographyThe equipment parameters (temperatures, columns, mass traces) may be chosen by the individual laboratory or are determined by the analytes.3.2.2 AnalysisInternal standards: at least three internal standards must be used. For these three standards, the internal standards and the correction ranges are defined as followed:Parameter Internal standards with recommended reference•Naphthalene Naphthalene-d8•Acenaphthylene Pyrene-d10 or anthracene-d10 or phenanthrene-d10 •Acenaphthene Pyrene-d10 or anthracene-d10 or phenanthrene-d10 •Fluorene Pyrene-d10 or anthracene-d10 or phenanthrene-d10 •Phenanthrene Pyrene-d10 or anthracene-d10 or phenanthrene-d10 •Anthracene Pyrene-d10 or anthracene-d10 or phenanthrene-d10 •Fluoranthene Pyrene-d10 or anthracene-d10 or phenanthrene-d10•Pyrene Pyrene-d10 or anthracene-d10 or phenanthrene-d10•Benzo[a]anthracene Pyrene-d10 or anthracene-d10 or phenanthrene-d10 •Chrysene Pyrene-d10 or anthracene-d10 or phenanthrene-d10•Benzo[b]fluoranthene Benzo[a]pyrene-d12 or perylene-d12 or triphenylbenzene •Benzo[k]fluoranthene Benzo[a]pyrene-d12 or perylene-d12 or triphenylbenzene •Benzo[j]fluoranthene Benzo[a]pyrene-d12 or perylene-d12 or triphenylbenzene •Benzo[a]pyrene Benzo[a]pyrene-d12 or perylene-d12 or triphenylbenzene •Benzo[e]pyrene Benzo[a]pyrene-d12 or perylene-d12 or triphenylbenzene •Indeno[1,2,3-cd]pyrene Benzo[a]pyrene-d12 or perylene-d12 or triphenylbenzene •Dibenzo[a,h]anthracene Benzo[a]pyrene-d12 or perylene-d12 or triphenylbenzene •Benzo[g,h,i]perylene Benzo[a]pyrene-d12 or perylene-d12 or triphenylbenzene•External calibration: for each individual PAH, at least a three-point calibration must be carried out with reference to the internal standardisation set out above. A working range of 0.1 to 10 mg/kg is recommended here.•Concentrations above the calibration range can be determined by diluting the extract.3.2.3 Limit of quantificationThe limit of quantification for material samples is 0.2 mg/kg per parameter.3.3 Special characteristicsBecause it is relatively volatile compared to the other 17 PAHs, naphthalene constitutes a parameter that is hard to assess in products that come into contact with the skin. Experience from the testing institutes indicates that it is possible to identify instances of both naphthalene depletion in materials and secondary contamination. The result obtained for naphthalene therefore only ever reflects the test specimen’s current situation at the time of measurement.Annex: Measuring conditions for gas chromatography (for information) Injected volume: 1 µl pulsed splitlessColumn: HT8 25m, ID 0.22mm, film thickness: 0.25µmInjector temperature: 280°CTransfer-line temperature: 260°CInitial temperature: 50°CInitial time: 2 min Heatingrate: 11°C/min Finaltemperature: 320°C Finaltime: 8 min3,418 D-naphthalene8,186 D-phenanthrene23,182 D-benzo[a]pyrene3,459 Naphthalene5,586 Acenaphthylene5,845 Acenaphthene6,634 Fluorene8,235 Phenanthrene8,337 Anthracene11,217 Fluoranthene11,914 Pyrene16,830 Benzo(a)anthracene16,982 Chrysene21,860 Benzo(b+j)fluoranthene21,964 Benzo(k)fluoranthene23,055 Benzo(e)pyrene23,302 Benzo(a)pyrene27,974 Indeno(ghi)perylene28,121 Dibenzo(ah)anthracene28,549 Benzo(ghi)perylene。
2014年第33好国标标准公告(2015.01.06)
2015-06-01
28
GB/T 20001.10-2014
标准编写规则 第10部分：产品标准
2015-06-01
29
GB/T 20002.3-2014
标准中特定内容的起草 第3部分：产品标准中涉及环境的内容
GB/T 20000.5-2004
2015-06-01
2015-07-01
70
GB/T 30674-2014
企业应急物流能力评估规范
2015-07-01
71
GB/T 30675-2014
阁楼式货架
2015-07-01
72
GB/T 30676-2014
应急物资投送包装及标识
2015-07-01
73
GB/T 30677-2014
轻型汽车电子稳定性控制系统性能要求及试验方法
55
GB/T 30659-2014
假肢和矫形器 要求和试验方法
2015-07-01
56
GB/T 30660.1-2014
假肢和矫形器 术语 第1部分：正常步态
2015-07-01
57
GB/T 30661.2-2014
轮椅车座椅 第2部分：维持组织完整性装置的物理和机械特性测定 座垫
2015-07-01
2015-04-30
41
GB/T 30645-2014
糕点分类
2015-04-30
42
GB/T 30646-2014
涂料中邻苯二甲酸酯含量的测定 气相色谱/质谱联用法
2015-07-01
43
GB/T 30647-2014
涂料中有害元素总含量的测定
国巨2014年SGS报告_Ni PLATING
:::::=====================================================================================================================:測試報告Test Report號碼(No.):KA/2014/70951日期(Date):2014/07/31頁數(Page):1of 11以下測試樣品係由客戶送樣,且由客戶聲稱並經客戶確認如下(The following samples was/were submitted and identified by/on behalf of the client as)：2014/07/15TO 2014/07/31Ni CROWN 樣品型號(Style/Item No.)樣品名稱(Sample Description)Ni PLATING 請見下一頁(Please refer to next pages).測試結果(Test Results)測試期間(Testing Period)2014/07/15送樣廠商(Sample Submitted By)收件日期(Sample Receiving Date)國巨股份有限公司楠梓分公司(YAGEO CORPORATION NANTZE BRANCH)國巨股份有限公司楠梓分公司YAGEO CORPORATION NANTZE BRANCH 高雄市楠梓加工出口區西三街16號16,WEST 3RD STREET N. E.P.Z.KAOHSIUNG,TAIWAN,R.O.C.Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /terms_and_conditions.htm and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under測試部位(PART NAME)NO.1:結果(Result)NO.1參考IEC 62321-5:2013方法,以感應耦合電漿原子發射光譜儀檢測./With reference to IEC 62321-5:2013and performed by ICP-AES.2n.d.參考IEC 62321-5:2013方法,以感應耦合電漿原子發射光譜儀檢測./With reference to IEC 62321-5:2013and performed by ICP-AES.2n.d.參考IEC 62321-4:2013方法,以感應耦合電漿原子發射光譜儀檢測./With reference to IEC 62321-4:2013and performed by ICP-AES.2n.d.參考IEC 62321:2008方法,用Boiling water extraction方法檢測./With reference to IEC 62321:2008and performed by boiling water extraction Method.0.02mg/kg with 50cm ²surfaceareaNegative-n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.十溴聯苯/Decabromobiphenyl二溴聯苯/Dibromobiphenyl 四溴聯苯/Tetrabromobiphenyl 五溴聯苯/Pentabromobiphenyl 三溴聯苯/Tribromobiphenyl 鎘/Cadmium (Cd)鉛/Lead (Pb)mg/kg七溴聯苯/Heptabromobiphenyl 八溴聯苯/Octabromobiphenyl **mg/kg銀色Ni CROWN (SILVER Ni CROWN)方法偵測極限值(MDL)單位(Unit)mg/kg六溴聯苯/Hexabromobiphenyl 九溴聯苯/Nonabromobiphenyl 多溴聯苯總和/Sum of PBBs 測試項目(Test Items)汞/Mercury (Hg)六價鉻/Hexavalent Chromium Cr(VI)by boiling water extraction#一溴聯苯/Monobromobiphenyl 測試結果(Test Results)測試方法(Method)測試報告Test Report號碼(No.):KA/2014/70951日期(Date):2014/07/31頁數(Page):2of 11國巨股份有限公司楠梓分公司YAGEO CORPORATION NANTZE BRANCH 高雄市楠梓加工出口區西三街16號16,WEST 3RD STREET N. E.P.Z.KAOHSIUNG,TAIWAN,R.O. C.參考IEC 62321:2008方法,以氣相層析儀/質譜儀檢測./With reference to IEC 62321:2008and performed by GC/MS.mg/kgUnless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /terms_and_conditions.htm and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under結果(Result)NO.1-n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.參考IEC 62321:2008方法,以氣相層析/質譜儀檢測./With reference to IEC 62321:2008method.Analysis was performed by GC/MS.5n.d.參考BS EN 14582:2007,以離子層析儀分析./With reference to BS EN 14582:2007.Analysis was performed by IC.50n.d.參考BS EN 14582:2007,以離子層析儀分析./With reference to BS EN 14582:2007.Analysis was performed by IC.50n.d.參考BS EN 14582:2007,以離子層析儀分析./With reference to BS EN 14582:2007.Analysis was performed by IC.50n.d.八溴聯苯醚/Octabromodiphenyl ether 三溴聯苯醚/Tribromodiphenyl ether 十溴聯苯醚/Decabromodiphenyl ether mg/kg 鹵素(溴)/Halogen-Bromine (Br)(CAS No.:10097-32-2)鹵素(氯)/Halogen-Chlorine (Cl)(CAS No.:22537-15-1)鹵素(氟)/Halogen-Fluorine (F)(CAS No.:14762-94-8)六溴環十二烷及所有主要被辨別出的異構物/Hexabromocyclododecane (HBCDD)and all major diastereoisomers identified (α-HBCDD,β-HBCDD,γ-HBCDD)(CAS No.:25637-99-4and 3194-55-6(134237-51-7,134237-50-6,134237-52-8))mg/kgmg/kg 16,WEST 3RD STREET N. E.P.Z.KAOHSIUNG,TAIWAN,R.O. C.一溴聯苯醚/Monobromodiphenyl ether 多溴聯苯醚總和/Sum of PBDEs九溴聯苯醚/Nonabromodiphenyl ether 六溴聯苯醚/Hexabromodiphenyl ether 七溴聯苯醚/Heptabromodiphenyl ether 二溴聯苯醚/Dibromodiphenyl ether mg/kg 鹵素/Halogen測試報告Test Report號碼(No.):KA/2014/70951日期(Date):2014/07/31頁數(Page):3of 11國巨股份有限公司楠梓分公司YAGEO CORPORATION NANTZE BRANCH 高雄市楠梓加工出口區西三街16號五溴聯苯醚/Pentabromodiphenyl ether 四溴聯苯醚/Tetrabromodiphenyl ether參考IEC 62321:2008方法,以氣相層析儀/質譜儀檢測./With reference to IEC 62321:2008and performed by GC/MS.mg/kg 測試項目(Test Items)單位(Unit)測試方法(Method)方法偵測極限值(MDL)Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /terms_and_conditions.htm and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under結果(Result)NO.1參考BS EN 14582:2007,以離子層析儀分析./With reference to BS EN 14582:2007.Analysis was performed by IC.50n.d.本測試參考EN 14372,以氣相層析儀/質譜儀檢測之./With reference to EN 14372.Analysis was performed by GC/MS.0.003n.d.本測試參考EN 14372,以氣相層析儀/質譜儀檢測之./With reference to EN 14372.Analysis was performed by GC/MS.0.003n.d.本測試參考EN 14372,以氣相層析儀/質譜儀檢測之./With reference to EN 14372.Analysis was performed by GC/MS.0.003n.d.本測試參考EN 14372,以氣相層析儀/質譜儀檢測之./With reference to EN 14372.Analysis was performed by GC/MS.0.01n.d.本測試參考EN 14372,以氣相層析儀/質譜儀檢測之./With reference to EN 14372.Analysis was performed by GC/MS.0.01n.d.本測試參考EN 14372,以氣相層析儀/質譜儀檢測之./With reference to EN 14372.Analysis was performed by GC/MS.0.003n.d.%%%%鹵素(碘)/Halogen-Iodine (I)(CAS No.:14362-44-8)鄰苯二甲酸二丁酯/DBP (Dibutyl phthalate)(CAS No.:84-74-2)mg/kg16,WEST 3RD STREET N. E.P.Z.KAOHSIUNG,TAIWAN,R.O. C.鄰苯二甲酸二(2-乙基己基)酯/DEHP (Di-(2-ethylhexyl)phthalate)(CAS No.:117-81-7)鄰苯二甲酸甲苯基丁酯/BBP (Benzyl butyl phthalate)(CAS No.:85-68-7)高雄市楠梓加工出口區西三街16號鄰苯二甲酸二異癸酯/DIDP (Di-isodecyl phthalate)(CAS No.:26761-40-0,68515-49-1)鄰苯二甲酸二異壬酯/DINP (Di-isononyl phthalate)(CAS No.:28553-12-0,68515-48-0)可塑劑定量分析/Phthalates測試報告Test Report號碼(No.):KA/2014/70951日期(Date):2014/07/31頁數(Page):4of 11國巨股份有限公司楠梓分公司YAGEO CORPORATION NANTZE BRANCH 測試項目(Test Items)單位(Unit)測試方法(Method)方法偵測極限值(MDL)%%鄰苯二甲酸二正辛酯/DNOP (Di-n-octyl phthalate)(CAS No.:117-84-0)Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /terms_and_conditions.htm and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under備註(Note)：3.MDL =Method Detection Limit (方法偵測極限值)2.n.d.=Not Detected (未檢出)4."-"=Not Regulated (無規格值)1.mg/kg =ppm；0.1wt%=1000ppm 測試報告Test Report號碼(No.):KA/2014/70951日期(Date):2014/07/31頁數(Page):5of 11國巨股份有限公司楠梓分公司YAGEO CORPORATION NANTZE BRANCH 高雄市楠梓加工出口區西三街16號16,WEST 3RD STREET N. E.P.Z.KAOHSIUNG,TAIWAN,R.O. C.5.#= a.Positive means the presence of CrVI on the tested areas(Positive表示測試區域偵測到六價鉻)b.Negative means the absence of CrVI on the tested areas (Negative表示測試區域未偵測到六價鉻)The detected concentration in boiling-water-extraction solution is equal or greater than 0.02mg/kg with 50cm ² tested areas ./該溶液濃度≧0.02mg/kg with 50cm ² (tested areas)Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /terms_and_conditions.htm and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under測試報告Test Report號碼(No.):KA/2014/70951日期(Date):2014/07/31頁數(Page):6of 11國巨股份有限公司楠梓分公司YAGEO CORPORATION NANTZE BRANCH 高雄市楠梓加工出口區西三街16號16,WEST 3RD STREET N. E.P.Z.KAOHSIUNG,TAIWAN,R.O. C.Note**：(1)針對非金屬材料加入鹼性消化液，加熱至90~95℃萃取./Fornon-m e ta l l i cm ate r i a l ,a d d a l ka l i ne d i g e s ti on r e a g e nt and he a t to 90~95℃.(2)針對金屬材料加入純水，加熱至沸騰萃取./Form e tal l i cm a te r i a l ,a d d pu r e w ate ra nd he a t tob oi l i ng .1)根據以下的流程圖之條件，樣品已完全溶解。
2014年超白玻璃REACH及ROHS报告-中文
测试报告 No. CANML1411069404 日期: 2014年07月15日第1页，共17页测试报告海南中航特玻材料有限公司中国海南省老城经济开发区南一环路以下测试之样品是由申请者所提供及确认 : 超白浮法玻璃SGS工作编号 : GZIN1407017966PC - GZ内部编号 : 4.4样品接收日期 : 2014年07月09日测试周期 : 2014年07月09日 - 2014年07月15日测试要求 : A: 根据客户要求，(i) 基于欧洲化学品管理署截止2014年6月16日公布的供授权审议的高关注物质候选清单(根据欧盟第1907/2006号REACH法规)，对155种高关注物质(SVHC)进行筛分测试。
B: 根据客户要求测试测试结果 : 请参见下一页总结 : A:根据具体的测试范围和分析技术，委托样品中测试的高关注物质浓度都≤ 0.1%。
通过结论B：基于所送样品进行的测试，镉、铅、汞、六价铬、多溴联苯(PBBs)、多溴二苯醚(PBDEs)的测试结果符合欧盟RoHS指令2002/95/EC的重订指令2011/65/EU附录II的限值要求。
通标标准技术服务有限公司授权签名_________________Echo Yeung 杨谷毅批准签署人备注: 本报告是编号为CANML1411069403报告的中文版本。
测试报告测试报告No. CANML1411069404日期: 2014年07月15日 第2页， 共17页测试结果 :测试样品描述 : 样品编号SGS 样品ID 描述SN1 CAN14-110694.002 透明玻璃A: SVHC 备注备注：：(1) 本报告所涉及的关于特定高关注物质的化学分析是根据欧洲化学品管理署发布的下列文件，利用现有的分析技术完成的。
http://echa.europa.eu/web/guest/candidate-list-table这些文件清单由欧洲化学品管理署评估, 将来可能会有变化。
SGS
通标标准技术服务有限公司 授权签名.
Reabeca Zhou周艳. 批准签署人.
备注: 根据客户申请, SGS出具了此中文报告, 英文版本可根据客户要求提供. (The Chinese test report is issued according to the applicant’s request. The English version is available from SGS if further needed) .
1000 -
单位. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg. mg/kg.
MDL. 2 2 2 2 5 5 5 5 5 5 5 5 5 5 5 5
测试项目. 镉(Cd). 铅(Pb). 汞(Hg). 六价铬(Cr(VI)). 多溴联苯之和(PBBs). 一溴联苯. 二溴联苯. 三溴联苯. 四溴联苯. 五溴联苯. 六溴联苯. 七溴联苯. 八溴联苯. 九溴联苯. 十溴联苯. 多溴二苯醚之和(PBDEs). 一溴二苯醚. 二溴二苯醚.
限值. 100 1000 1000 1000 1000
结论 :.
TP14-002079 - TJ . 2014年04月17日. 2014年04月17日 - 2014年04月22日. 根据客户要求测试. 请参见下一页.
请参见下一页.
基于所送样品进行的测试，镉、铅、汞、六价铬、多溴联苯(PBB)、多溴二苯 醚(PBDE) 的测试结果符合欧盟RoHS指令2002/95/EC 的重订指令2011/65/EU 附 录II的限值要求。.
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
:::::=====================================================================================================================:測試報告Test Report號碼(No.):KA/2014/70952日期(Date):2014/07/31頁數(Page):1of 11以下測試樣品係由客戶送樣,且由客戶聲稱並經客戶確認如下(The following samples was/were submitted and identified by/on behalf of the client as)：2014/07/15TO 2014/07/31Sn BALL 樣品型號(Style/Item No.)樣品名稱(Sample Description)Sn PLATING 請見下一頁(Please refer to next pages).測試結果(Test Results)測試期間(Testing Period)2014/07/15送樣廠商(Sample Submitted By)收件日期(Sample Receiving Date)國巨股份有限公司楠梓分公司(YAGEO CORPORATION NANTZE BRANCH)國巨股份有限公司楠梓分公司YAGEO CORPORATION NANTZE BRANCH 高雄市楠梓加工出口區西三街16號16,WEST 3RD STREET N. E.P.Z.KAOHSIUNG,TAIWAN,R.O.C.Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /terms_and_conditions.htm and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under測試部位(PART NAME)NO.1:結果(Result)NO.1參考IEC 62321-5:2013方法,以感應耦合電漿原子發射光譜儀檢測./With reference to IEC 62321-5:2013and performed by ICP-AES.2n.d.參考IEC 62321-5:2013方法,以感應耦合電漿原子發射光譜儀檢測./With reference to IEC 62321-5:2013and performed by ICP-AES.215.7參考IEC 62321-4:2013方法,以感應耦合電漿原子發射光譜儀檢測./With reference to IEC 62321-4:2013and performed by ICP-AES.2n.d.參考IEC 62321:2008方法,用Boiling water extraction方法檢測./With reference to IEC 62321:2008and performed by boiling water extraction Method.0.02mg/kg with 50cm ²surfaceareaNegative-n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.十溴聯苯/Decabromobiphenyl二溴聯苯/Dibromobiphenyl 四溴聯苯/Tetrabromobiphenyl 五溴聯苯/Pentabromobiphenyl 三溴聯苯/Tribromobiphenyl 鎘/Cadmium (Cd)鉛/Lead (Pb)mg/kg 七溴聯苯/Heptabromobiphenyl 八溴聯苯/Octabromobiphenyl **mg/kg 銀色Sn BALL (SILVER Sn BALL)方法偵測極限值(MDL)單位(Unit)mg/kg六溴聯苯/Hexabromobiphenyl 九溴聯苯/Nonabromobiphenyl 多溴聯苯總和/Sum of PBBs 測試項目(Test Items)汞/Mercury (Hg)六價鉻/Hexavalent Chromium Cr(VI)by boiling water extraction#一溴聯苯/Monobromobiphenyl 測試結果(Test Results)測試方法(Method)測試報告Test Report號碼(No.):KA/2014/70952日期(Date):2014/07/31頁數(Page):2of 11國巨股份有限公司楠梓分公司YAGEO CORPORATION NANTZE BRANCH 高雄市楠梓加工出口區西三街16號16,WEST 3RD STREET N. E.P.Z.KAOHSIUNG,TAIWAN,R.O. C.參考IEC 62321:2008方法,以氣相層析儀/質譜儀檢測./With reference to IEC 62321:2008and performed by GC/MS.mg/kgUnless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /terms_and_conditions.htm and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under結果(Result)NO.1-n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.5n.d.參考IEC 62321:2008方法,以氣相層析/質譜儀檢測./With reference to IEC 62321:2008method.Analysis was performed by GC/MS.5n.d.參考BS EN 14582:2007,以離子層析儀分析./With reference to BS EN 14582:2007.Analysis was performed by IC.50n.d.參考BS EN 14582:2007,以離子層析儀分析./With reference to BS EN 14582:2007.Analysis was performed by IC.50n.d.參考BS EN 14582:2007,以離子層析儀分析./With reference to BS EN 14582:2007.Analysis was performed by IC.50n.d.八溴聯苯醚/Octabromodiphenyl ether 三溴聯苯醚/Tribromodiphenyl ether 十溴聯苯醚/Decabromodiphenyl ether mg/kg 鹵素(溴)/Halogen-Bromine (Br)(CAS No.:10097-32-2)鹵素(氯)/Halogen-Chlorine (Cl)(CAS No.:22537-15-1)鹵素(氟)/Halogen-Fluorine (F)(CAS No.:14762-94-8)六溴環十二烷及所有主要被辨別出的異構物/Hexabromocyclododecane (HBCDD)and all major diastereoisomers identified (α-HBCDD,β-HBCDD,γ-HBCDD)(CAS No.:25637-99-4and 3194-55-6(134237-51-7,134237-50-6,134237-52-8))mg/kgmg/kg 16,WEST 3RD STREET N. E.P.Z.KAOHSIUNG,TAIWAN,R.O. C.一溴聯苯醚/Monobromodiphenyl ether 多溴聯苯醚總和/Sum of PBDEs九溴聯苯醚/Nonabromodiphenyl ether 六溴聯苯醚/Hexabromodiphenyl ether 七溴聯苯醚/Heptabromodiphenyl ether 二溴聯苯醚/Dibromodiphenyl ether mg/kg 鹵素/Halogen測試報告Test Report號碼(No.):KA/2014/70952日期(Date):2014/07/31頁數(Page):3of 11國巨股份有限公司楠梓分公司YAGEO CORPORATION NANTZE BRANCH 高雄市楠梓加工出口區西三街16號五溴聯苯醚/Pentabromodiphenyl ether 四溴聯苯醚/Tetrabromodiphenyl ether參考IEC 62321:2008方法,以氣相層析儀/質譜儀檢測./With reference to IEC 62321:2008and performed by GC/MS.mg/kg 測試項目(Test Items)單位(Unit)測試方法(Method)方法偵測極限值(MDL)Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /terms_and_conditions.htm and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under結果(Result)NO.1參考BS EN 14582:2007,以離子層析儀分析./With reference to BS EN 14582:2007.Analysis was performed by IC.50n.d.本測試參考EN 14372,以氣相層析儀/質譜儀檢測之./With reference to EN 14372.Analysis was performed by GC/MS.0.003n.d.本測試參考EN 14372,以氣相層析儀/質譜儀檢測之./With reference to EN 14372.Analysis was performed by GC/MS.0.003n.d.本測試參考EN 14372,以氣相層析儀/質譜儀檢測之./With reference to EN 14372.Analysis was performed by GC/MS.0.003n.d.本測試參考EN 14372,以氣相層析儀/質譜儀檢測之./With reference to EN 14372.Analysis was performed by GC/MS.0.01n.d.本測試參考EN 14372,以氣相層析儀/質譜儀檢測之./With reference to EN 14372.Analysis was performed by GC/MS.0.01n.d.本測試參考EN 14372,以氣相層析儀/質譜儀檢測之./With reference to EN 14372.Analysis was performed by GC/MS.0.003n.d.%%%%鹵素(碘)/Halogen-Iodine (I)(CAS No.:14362-44-8)鄰苯二甲酸二丁酯/DBP (Dibutyl phthalate)(CAS No.:84-74-2)mg/kg16,WEST 3RD STREET N. E.P.Z.KAOHSIUNG,TAIWAN,R.O. C.鄰苯二甲酸二(2-乙基己基)酯/DEHP (Di-(2-ethylhexyl)phthalate)(CAS No.:117-81-7)鄰苯二甲酸甲苯基丁酯/BBP (Benzyl butyl phthalate)(CAS No.:85-68-7)高雄市楠梓加工出口區西三街16號鄰苯二甲酸二異癸酯/DIDP (Di-isodecyl phthalate)(CAS No.:26761-40-0,68515-49-1)鄰苯二甲酸二異壬酯/DINP (Di-isononyl phthalate)(CAS No.:28553-12-0,68515-48-0)可塑劑定量分析/Phthalates測試報告Test Report號碼(No.):KA/2014/70952日期(Date):2014/07/31頁數(Page):4of 11國巨股份有限公司楠梓分公司YAGEO CORPORATION NANTZE BRANCH 測試項目(Test Items)單位(Unit)測試方法(Method)方法偵測極限值(MDL)%%鄰苯二甲酸二正辛酯/DNOP (Di-n-octyl phthalate)(CAS No.:117-84-0)Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /terms_and_conditions.htm and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under備註(Note)：3.MDL =Method Detection Limit (方法偵測極限值)2.n.d.=Not Detected (未檢出)4."-"=Not Regulated (無規格值)1.mg/kg =ppm；0.1wt%=1000ppm 測試報告Test Report號碼(No.):KA/2014/70952日期(Date):2014/07/31頁數(Page):5of 11國巨股份有限公司楠梓分公司YAGEO CORPORATION NANTZE BRANCH 高雄市楠梓加工出口區西三街16號16,WEST 3RD STREET N. E.P.Z.KAOHSIUNG,TAIWAN,R.O. C.5.#= a.Positive means the presence of CrVI on the tested areas(Positive表示測試區域偵測到六價鉻)b.Negative means the absence of CrVI on the tested areas (Negative表示測試區域未偵測到六價鉻)The detected concentration in boiling-water-extraction solution is equal or greater than 0.02mg/kg with 50cm ² tested areas ./該溶液濃度≧0.02mg/kg with 50cm ² (tested areas)Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /terms_and_conditions.htm and, forelectronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under測試報告Test Report號碼(No.):KA/2014/70952日期(Date):2014/07/31頁數(Page):6of 11國巨股份有限公司楠梓分公司YAGEO CORPORATION NANTZE BRANCH 高雄市楠梓加工出口區西三街16號16,WEST 3RD STREET N. E.P.Z.KAOHSIUNG,TAIWAN,R.O. C.Note**：(1)針對非金屬材料加入鹼性消化液，加熱至90~95℃萃取./Fornon-m e ta l l i cm ate r i a l ,a d d a l ka l i ne d i g e s ti on r e a g e nt and he a t to 90~95℃.(2)針對金屬材料加入純水，加熱至沸騰萃取./Form e tal l i cm a te r i a l ,a d d pu r e w ate ra nd he a t tob oi l i ng .1)根據以下的流程圖之條件，樣品已完全溶解。