10-YPWO机床高压冷却泵
A10VSO液压泵简介( 变量调节过程)
A10VSO液压泵功能简介一、结构及工作原理A10VSO液压泵是REXROTH公司生产的一种中负荷斜盘式变量泵，由于其优异的性价比，在冶金、机床、化工、工程等各领域得到了广泛的应用。
如图1为其结构图。
图1 结构图1 驱动轴2 止推盘3 控制活塞4 控制阀5 压力侧6 配油盘7 吸油侧8 缸体9 柱塞10 柱塞滑靴11 摇杆12 预压腔13 回程活塞电机把一个输入扭矩传递给泵驱动轴1，缸体8和柱塞9随驱动轴一起旋转，在每个旋转周期内，柱塞9产生一个线性的位移，这个位移的大小由摇杆11的角度决定。
通过止推板2，柱塞滑靴10紧紧地贴在摇杆11上，在每个旋转周期内，每个柱塞9都转过由其初始位置决定的下死点和上死点，通过配油盘6上的两个窗口吸入与排出的流体容积与柱塞面积和位移相匹配。
在吸油区，流体进入柱塞腔容积增大部分，与此同时，各个柱塞把流体压出柱塞腔容积减小部分。
在柱塞到达压力区之前，通过优化的预压缩容腔12，柱塞腔内流体压力已经得到提升。
这就极大地减少了压力冲击。
摇杆11上斜盘的角度在最小与最大范围内无级调整，通过改变斜盘角度，柱塞位移即排量得到改变，通过控制活塞3就能改变斜盘角度。
在静压支撑作用下，摇杆可以平稳运动，并且克服回程活塞13的作用力而保持平衡。
增加斜盘角度即增大排量，减小角度即减小排量。
斜盘角度永远不可能到达完全的零位，因为一个最小的流量是必须的：冷却柱塞补偿内泄漏润滑所有运动部件二、变量形式与其它液压泵一样，该泵也可以组成多种变量形式，主要有压力控制、流量控制、功率控制、电子控制等，还可以把几种控制形式组合成复合控制。
1、两位控制简称DG（Two Position Control），顾名思义，只有两个位置的控制，要么泵最小摆角（零摆角），要么泵最大摆角，是一种特殊的控制方式。
结构和原理分别如图2和图3所示。
图2 DG 结构图 图3 DG 原理图通过将外部控制压力连接到油口X ，此压力直接作用在变量活塞上，根据该压力的大小，可以将变量泵的摆角设置为最大或最小。
冷却泵十大品牌最新排名榜单冷却泵品牌
1.上海阳光泵业制造有限公司上海阳光泵业制造有限公司是国内一家著名的集研制、开发、生产、销售、服务于一体的大型多元化企业，注册资本1100万元。
主导产品包括：螺杆泵、隔膜泵、液下泵、磁力泵、排污泵、化工泵、多级泵、自吸泵、齿轮油泵、计量泵、卫生泵、真空泵、潜水泵、转子泵等类别。
产品以优越的性能，精良的品质已获得各项专业认证证书及客户的认可。
公司拥有多名水泵专家和各类中高级工程师，不断的开发制造，升级换代产品年年都有问世。
公司拥有国内高水准的水泵性能测试中心，产品全部采用CAD设计软件和CFD计算流体力学软件等先进设计手段，产品经过精密铸造、热锻压、焊接、热处理、精加工、装配等十多道工序。
使用先进的数控加工中心、等离子焊接机、全自动气体保护、半自动真空熔焊机、超频真空热处理设备、高效加工专机、理化和探伤设备等各类高精密加工检测设备。
齐全的加工检测设备，于同行业中处领先地位，更加充分保证了产品的质量。
公司产品达二十大系列，一万多种规格。
产品广泛应用于：工业生产，建筑城镇供水，环保污水处理，市政工程，食品制药，水利电力，石油船舶等多种领域。
客户包括大庆油田、胜利油田、中国水利水电、浦项集团等世界知名企业。
2.黄山工业泵制造有限公司黄山工业泵制造有限公司，创建于1996年，建立了“黄泵”和"RSP"螺杆泵品牌，并专业从事螺杆泵研究、设计、制造和配套服务，公司坐落于安徽省黄山市屯溪区九龙工业园，占地4.5公顷，标准化厂房1.3万平方米。
黄泵致力于生产各类别及型式的三螺杆泵、双螺杆泵、单螺杆泵、五螺杆泵，以及螺杆泵集成系统，产品广泛应用于冶金、电力、船舶、石油、化工、环保、建材、机械等行业，产品市场不仅覆盖中国各地，还延伸至欧盟、中东、东南亚、中亚、俄语地区等国际市场。
黄泵目前拥有螺杆泵生产所需的各类专业、高精、智能的加工和检测设备100余套，不论是数控螺杆磨床、卧式加工中心、热处理、表面硬化处理、焊接等加工设备设施，还是产品性能综合测试系统、三坐标测量机、光谱测量仪等测量设备设施，在先进程度上都己达到国际先进水平。
冷却泵型号大全
ACP-2200HMFS85 ACP-2200HMFS100 ACP-3700HMFS115 ACP-3700HMFS130 ACP-3700HMFS145 ACP-3700HMFC180(V) ACP-3700HMFC180(H) ACP-3700HMFC200(V) ACP-3700HMFC200(H) ACP-5500HMFC200(V) ACP-5500HMFC220(V) ACP-5500HMFC240(V) ACP-5500HMFC260(V) ACP-5500HMFC280(V) ACP-300HSP 200 ACP-400HSP 280 ACF-T-20-M-B ACF-T-20-M-C ACF-T-30-M-B ACF-T-30-M-C ACF-T-30-M-B ASF-60L ASF-180L ASF-250L ASF-400L ASF-180HL18 ASF-400HL18 ASF-400HL28
VKP075H-4Z VKP085H-4Z VKP095H-4Z VKP085A-4Z VKP075AH VKP075AK VKP085AF VKP085AK VKP095AF VKP095AK VKP075J VKP085J VKP095J VKP115A-Z VKP085A-4Z VKD111AA VKD131AB VKD141AC VKD151AD VKP085A-4Z VKD111AA-4Z VKD131AB-4Z VKD141AC-4Z VKD151AD-4Z
冷却泵型号大全
韩国亚隆 ACP-60F ACP-100F ACP-180F ACP-250F ACP-400F ACP-100FS-120 ACP-180HF-18 ACP-180HF-25 ACP-180HFS-160 ACP-250HF-18 ACP-250HF-25 ACP-250HFS-160 ACP-420HFS-110 ACP-400HF-18 ACP-420HFS-200 ACP-400FS-250 ACP-400HF-28 ACP-600HF-18 ACP-600HF-28 ACP-900MF ACP-900MFS ACP-1100MF ACP-1500MF ACP-900HMF-S30 ACP-900HMFS-45 ACP-1100HMFS60 汉城精工冷却泵 HCP-100S HCP-180S HCP-250S HCP-400S HCP-900S HCP-60F HCP-100F HCP-180F HCP-250F HCP-400F HCP-118F HCP-125F HCP-218F HCP-225F HCP-418F HCP-428F HCP-618F HCP-628F HCP-400MF HCP-900MF HCP-900MFS HCP-1500MF HCP-2200MF HCP-3000MF HCP-3700MF HCP-3700HMF 泰拉尔冷却泵 LPW401C-0.75 LPW401D-0.75 LPW401D-1.5 LPW402C-1.5 LPW402D-1.5 LPW402D-2.2 LPW403C-2.2 LPW403D-2.2 LPW404C-3.0 LPW404D-3.0 LPW653/2A-55.5H LPW653/2A-55.5L LPW653/2A-57.5 LPW653/2A-65.5 LPW653/2A-67.5 LPW653A-57.5 LPS401C-0.75T LPS401D-0.75T LPS401D-1.5T LPS402C-1.5T LPS402D-1.5T LPS402D-2.2T LPS403C-2.2T LPS403D-2.2T LPS404C-3.0T LPS404D-3.0T 富士冷却泵 VKN045L VKN045A VKN055A VKN065A VKN075A VKN085A VKN095A VKN115A VKP085A-4Z VKN045A-4Z VKN055A-4Z VKN065A-4Z VKN075A-4Z VKN085A-4Z VKN095A-4Z VKN115A-4Z VKP085A-4Z VKP045L VKP045A VKP055A VKP065A VKP075A VKP085A VKP095A VKP115A
意大利SEIM机床高压冷却泵
上海华歌实业有限公司 上海华歌实业有限公司北京办事处－－杜春峰 １３９１１７３９８９１
意大利赛姆
机床高压冷却螺杆泵
ＹＰＷＯ 系列
（产地：意大利）
公司简介
上海华歌实业有限公司是一家经营欧美流体与传动产品的 专业公司，是欧美很多著名公司中国一级经销商，公司致力于解 决液压，润滑，开关/传感器，冷却，传动，水泵等机电领域的问 题，特别擅长解决疑难问题。本公司与很多外国公司有良好的合 作关系。
ＳＥＩＭ可提供下列：
１、含电机的泵组（包括联轴器） ２、安全阀或控制阀（可选项） ３、含有管路和浸入式泵组的油箱盖板（可选项）
典型应用：
１、机床设备冷却和润滑＊ ２、深孔钻床＊ ３、低润滑性的介质输送 ４、热交换器和能量回收系统的中心单元 ５、轻质燃油的循环系统 ６、油箱填充和油／燃料的输送 ＊５％油含量（最小） ７、泵体使用了铸铁结构可以应用于动力和高压润滑 行业（如造船和电力）
success for the YPO6 Series in our minds-by which receive the the succesfull characteristics by integrat-
mented hydraulic efficiency which provides outstanding performances. In this catalogue you will be guided to the selection of
使用参数 ／ OPERATING DATA 介质－ Handled fluid
粘度范围 － Viscosity range 泵转速－ Pump speed
转向（从轴端看）－ Rotation (viewed from coupling end) 过滤精度－ Ｒｅｃｏｍｍｅｎｄｅｄｆｉｌｔｒａｔｉｏｎ
CNC专用高压泵安装使用维护说明书
CNC专用高压泵安装使用维护说明书上海冠派机电设备有限公司MPCBS-4L（图片仅供参考）目录1.1企业宗旨 (2)1.2价值观…………………………………………………………………………………….1.3目标……………………………………………………………………………………….1.4高压油泵作用……………………………………………………………………………..2.1注意事项2.1.1危险 (3)2.1.2注意 (4)2.2保修期限和范围………………………………………………………………………..2.3保修登记证书 (5)3.1系统主要参数 (6)4.1安装说明4.1系统定位 (7)4.2电源安装………………………………………………………………………………4.3电气接口4.3.1信号线连接 (8)4.3.2信号线连接图………………………………………………………………………. 4.4油管4.4.1进油管连接 (10)4.4.2回油管连接…………………………………………………………………………..4.4.3高压油管连接 (11)4.4.4排刀固定块安装……………………………………………………………………..4.4.5钻孔刀位固定块安装………………………………………………………………..4.4.6背面主轴固定块安装………………………………………………………………..4.4.7背面主轴中心出水油管安装………………………………………………………..5.1系统测试说明5.1.1测试步骤 (16)5.1.2压力设定………………………………………………………………………………5.1.3测试程序………………………………………………………………………………5.1.4程序举列……………………………………………………………………………….6.维护保养6.1滤芯清洗方法 (22)6.2滤芯更换………………………………………………………………………………..6.3定期维护………………………………………………………………………………..6.4中压泵更换………………………………………………………………………………6.5消耗部品表 (19)6.6系统主要部件 (20)7.故障排除7.1在本机上的报警 (21)7.2在机床上的报警………………………………………………………………………8.电气原理图 (22)9.出厂检验表 (27)1.1企业宗旨做CNC专用高压泵的领导者，通过提供卓越的服务，创新思路，创造性的解决方案，以改善加工效率和提高加工刀具的使用寿命。
高压设备公司PS-150泵系统标准操作和维护说明书
Standard Operating and Maintenance Instructionsfor Pumping SystemModel PS-150High Pressure Equipment Company, LLC2955 West 17th Street, Suite 6PO Box 8248Erie, PA 16505 USA814-838-2028 (phone)814-838-6075 (fax)Standard Operating and Maintenance Instructions for Pumping System Model PS-150:Description:The Model PS-150 Pumping System is designed for generating hydraulic pressure up to 150,000 psi by means of an air operated hydraulic pump and an intensifier. This system is complete and ready to operate requiring only the connection of an air supply of approximately 80 psi.Standard Features:The steel console is 26" wide, 24" deep, 40" high and includes manual valves, air regulator, filter and lubricator, air gauge, high pressure gauge, reservoir, oil filter, pump (0-16,000 psi), related high pressure tubing and fittings.The 0-20,000 psi pressure gauge is connected to the low pressure side of the intensifier which has a ratio of 10:1. Pressure on the high pressure side of the intensifier is thus determined by multiplying the gauge reading by 10. A small variation must be allowed for friction from the intensifier packing.The air operated hydraulic pump pressurizes the system to 16,000 psi with valves “A”and “B” closed and the intensifier piston is automatically positioned to the low pressure end of its stroke. With valves “A” and “C” closed, valve “B” is opened to allow the pump to pressurize the low pressure end of the intensifier. The fluid in the high pressure end of the intensifier is thus pressurized with a 10:1 ratio. If the intensifier reaches the end of its stroke before the desired pressure is achieved, the intensifier may be recycled. The intensifier output is approximately 1.2 cubic inches per stroke.The 150,000 psi Hydraulic Intensifier is designed with a ratio of areas on the two pistons of 10:1. Consequently, pressures up to 150,000 psi can be achieved by using a commercially available lower pressure (15,000 psi) pump.Material of construction for the pressure containing parts is 4340 alloy steel (or equivalent) properly heat treated for use at elevated pressures. Only non-corrosive type fluids should be used. The high pressure packing is housed in a separate removable stuffing box. This design permits improved concentricity and facilitates close tolerance machining of the packing area. Capacity per stroke at the high pressure end is 1.2 cubic inches. Capacity at the low pressure end is 12.6 cubic inches per stroke. Piston travel is 4 inches. Weight is approximately 150 pounds.Standard connections are for 1/4" O.D. tubing (HF4) on the low pressure end and 3/8" O.D. x 1/16" I.D. tubing (XF6) on the high pressure end.PS-150 ModelThe only connections required for installation of the system are an air supply and connection of the system to the pressure vessel or unit which is to be pressurized.The air supply line is connected directly to the side of the cabinet and is for ½ in NPT pipe. A larger air supply line is recommended if the system is quite a distance from the source of air. Pressure of the air supply should be approximately 60 psi minimum.The reservoir is built directly into the cabinet and should be filled with a suitable fluid before operation. The formulas as used by High Pressure Equipment Company are as follows for pressures up to 150,000 PSI:1 part kerosene2 parts hydraulic oilThe above mixtures may be purchased from High Pressure Equipment Company or other suitable fluids having a low viscosity may be used.Operating Instructions:The air regulator controls the output of the pump so that a given setting as shown on the small panel mounted air regulator gauge will operate the pump to a corresponding pressure. The pump will then automatically stop. Should there be any loss of pressure due to compaction of the tested material or temperature drop, the pump will automatically make up the pressure loss.1.Open Valve "C" and the "High pressure outlet valve". Close valve "B" and the "ventvalve".2.Rotate the regulator handle in a clockwise direction until the small air regulator gaugereads approximately 60 psi. Open the air inlet valve. The pump will now begin operating and will pump to approximately 16,000 psi (Should pressures of less than 16,000 psi bedesired, select a lower air inlet setting on the regulator.3.Close valve "C" and open valve "B-. The pump will now begin pumping into the bottomof the intensifier and compressing the fluid in the top of the intensifier to increase thepressure.NOTE, Model PS-150 is equipped with a 20,000 psi gauge and is connected to thelow pressure side of the intensifier. As the intensifier has a 10: 1 ratio. Thepressure on the high pressure side of the intensifier is 10 times that shown on thegauge. This of course, does not apply when valve UB" is closed and theintensifier is being by-passed or recycled.4.When the desired pressure is reached the air inlet valve should be closed or the airregulator handle rotated counter-clockwise thus reducing air input to the pump. If thedesired pressure is not reached, the intensifier must be recycled.The intensifier may be recycled by closing valve "B" and opening valve "C”. The pump is then operated to force the intensifier piston downward and force the oil in the bottom of the intensifier back into the reservoir. This may require upwards to 16,000 psi to return the piston. When the piston has returned to the bottom of the intensifier valve "C” should be closed and valve "E" opened. The pumping operation may then be continued as in steps 3 and 4 above.Venting the System:To vent pressure from the system simply open the "vent valve". This may be done at any time and will not damage the system if opened during operation for any reason.Use of the Air Regulator:The air regulator controls the pressure output of the pump and also the speed at which the pump operates. The operator may wish to control the system entirely by the regulator and leave the "Air Inlet Valve" open at all times. Thus the pump may be driven relatively fast until the unit approaches the desired pressure and then slowed down and finally stopped as it reaches this point. Do not exceed 60 psi on the regulator gauge.Position of the Intensifier Piston:The position of the piston may be determined listening to the pump. When the piston is at either end of its stroke the pump will stall out.Maintenance:The air line is equipped with a filter and lubricator. The air filter is provided to filter water from the air supply. Depending upon the amount of water in the air supply, the filter bowl will fill up over a period of time. This is easily drained by opening the small drain cock on the bottom of the bowl and allowing the water to drain into a container.The lubricator is provided in order to lubricate the air portion of the pump. This has been set at the factory for typical air flow conditions. An oil flow of approximately 3 to 5 drops per minute is recommended. This lubricator should be periodically checked and filled with a lubricating oil of approximately 150 to 200 s.s.u. @ 100 F (S.A.E. 10).The fluid within the reservoir should be kept clean in order to provide maximum life of the pump. When this fluid becomes excessively dirty, it is easily drained through the drain plug located at the bottom of the reservoir. A filter is provided between the reservoir and the pump.It is recommended that the disposable cartridge be removed and replaced should it become clogged with an excess of dirt. The valve between the reservoir and filter should be closed before removing the filter.Trouble Shooting:The pump is running but will not develop pressure:1. If the system has just been shipped, moved to a new location, or repairs have beenmade within the hydraulic lines, an "air lock" may have developed. A connection on the inlet side of the pump should be broken enough to determine whether or not the pump is receiving oil from the reservoir. If so, a connection on the outlet side of the pump should be broken slightly. With the pump operating (set the regulator so that the pump isoperating slowly) determine as to whether there is a flow through the lines. This willusually clear the "air lock" and the connection can be retightened.2. If the pump will not develop pressure and there does not appear to be an "air lock."The check valves on the inlet and outlet side of the pump should be cleaned or replaced. Spare parts or further information about your pumping system may be obtained direct from the HiP factory. Parts are generally stocked for immediate delivery.。
数控车床冷却水泵
数控车床冷却水泵所崔容强所长认为，我国虽然已经将光伏产业正式纳入国家能源发展的中长期规划，但与德国、日本、美国等发达国家已经将太阳能利用纳入能源储备战略比起来，我国政府对太阳能利用的重视程度还是不够。
长期以来，由于没有一个专门的机构来通盘考虑我国太阳能光伏发电产、学、研一体化的发展，因此造成我国太阳能产品的应用与研发力量的脱节。
业内人士呼吁，国家尽快落实《可再生能源》中有关太阳能利用的实施细则，利用政策激励作用尽快启动我国太阳能光伏市场。
例如，我国可以效仿发达国家的“屋顶计划”“建筑一体化光伏工程”，鼓励单位和个人建设太阳能光伏发电的分布电源。
根据我国国情，将太阳能发电技术用于城市道路、小区照明。
国家还可规定大中城市政府机关的建筑、标志性建筑、公益性建筑必须安装太阳能发电设备，以引领全社会兴起“太阳能时尚”。
据粗略测算，我国建筑屋顶面积总计约１００亿平方米，如果有１％的屋顶用来进行太阳能光伏发电，每年就可以提供１５００亿千瓦时的电能。
建设大规模并网光伏发电系统，目前已成为世界上一些国家大规模利用太阳能的一项战略。
我国有约１００万平方公里的荒漠资源，主要分布在太阳光照充沛的西北地区，太阳能光伏发电有很大的发展空间。
专家建议，可先将一些具有良好旅游资源的荒漠地区，作为我国大型并网光伏发电项目的起步建设区单相电泵伽利略DB\AB\JCB三相单相电泵概述：DB\AB\JCB三相单相电泵为立式安装的电动机与单级离心泵合为一整体的新型电泵，具有外形美、体积小、噪音低、过载能力强等优点。
伽利略DB\AB\JCB三相单相电泵用途：适用于50Hz或60Hz（单相时电压220~240V）380~420V任一频率和任一电压，可根据用户需要生产湿热带（三相、单相）机床冷却泵。
可供机床或其他设备做循环冷却润滑液之用。
冷却液一般为皂化液、乳化液、苏打水、轻矿物及无严重腐蚀的其他液体。
伽利略DB\AB\JCB三相单相电泵使用：1、电泵整体用铝合金铸成，轻巧耐用。
冷却泵十大品牌最新排名榜单冷却泵品牌
冷却泵十大品牌最新排名榜单冷却泵品牌1.上海阳光泵业制造有限公司上海阳光泵业制造有限公司是国内一家著名的集研制、开发、生产、销售、服务于一体的大型多元化企业，注册资本1100万元。
主导产品包括：螺杆泵、隔膜泵、液下泵、磁力泵、排污泵、化工泵、多级泵、自吸泵、齿轮油泵、计量泵、卫生泵、真空泵、潜水泵、转子泵等类别。
产品以优越的性能，精良的品质已获得各项专业认证证书及客户的认可。
公司拥有多名水泵专家和各类中高级工程师，不断的开发制造，升级换代产品年年都有问世。
公司拥有国内高水准的水泵性能测试中心，产品全部采用CAD设计软件和CFD计算流体力学软件等先进设计手段，产品经过精密铸造、热锻压、焊接、热处理、精加工、装配等十多道工序。
使用先进的数控加工中心、等离子焊接机、全自动气体保护、半自动真空熔焊机、超频真空热处理设备、高效加工专机、理化和探伤设备等各类高精密加工检测设备。
齐全的加工检测设备，于同行业中处领先地位，更加充分保证了产品的质量。
公司产品达二十大系列，一万多种规格。
产品广泛应用于：工业生产，建筑城镇供水，环保污水处理，市政工程，食品制药，水利电力，石油船舶等多种领域。
客户包括大庆油田、胜利油田、中国水利水电、浦项集团等世界知名企业。
2.永嘉天山工业泵有限公司永嘉天山工业泵有限公司创建于1985年。
地处我国东南沿海繁荣城市温州市北部------东瓯工业区，地理位置优越，交通便利。
“九五"期间，企业凭着雄厚的实力，在人才和技术方面注入了巨额资金。
引进了大量国内先进的新技术、新工艺，云集了一批专业技术人才，建成了一条科学的内部管理体系。
公司主要生产：气动隔膜泵、电动隔膜泵、自吸泵、离心泵、消防泵、管道泵、自吸排污泵、自吸油泵等工业泵;其中XZW自吸式涡流不堵塞排污泵，98年荣获浙江省科技进步奖。
历年被当地人民政府评为明星企业。
产品的各项性能指标均达到国内先进水平，并具有性能稳定、运行可靠、节能显著、安装、维修方便等特点。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
mented hydraulic efficiency which provides outstanding performances. In this catalogue you will be guided to the selection of
machining for highest perfomances 4 Steel hardened screws, by specific treatment Installation benefits: 5 Flange for pump mounting with delivery port above
本公司经营之产品，种类广泛，品质及安装尺寸均符合欧美 相应的工业标准。广泛应用在工程机械、普通机械、机床、船舶、 钢铁、冶金、煤矿、建筑、石化、医药、食品、能源等领域，皆 有很高的选择性和竞争性。
上海华歌实业有限公司是 seim 公司中国区授权总代理，负责 中国区产品的销售和售后服务等一切有关事宜。
6
5
1
3/4
2
2
性能参数
SECTION AND COMPONENTS
SERIE SERIES
YPWO
安装参数 ／ INSTALLATION DATA 安装－ Installation 行业－ Envirooment
室内或者户外－ Indoor or Outdoor 工业／海事－ Industrial / Naval
ＳＥＩＭ可提供下列：
１、含电机的泵组（包括联轴器） ２、安全阀或控制阀（可选项） ３、含有管路和浸入式泵组的油箱盖板（可选项）
典型应用：
１、机床设备冷却和润滑＊ ２、深孔钻床＊ ３、低润滑性的介质输送 ４、热交换器和能量回收系统的中心单元 ５、轻质燃油的循环系统 ６、油箱填充和油／燃料的输送 ＊５％油含量（最小） ７、泵体使用了铸铁结构可以应用于动力和高压润滑 行业（如造船和电力）
submersible installation (option). TYPICAL APPLICATIONS • Cooling and Lubricating on metal working machines* • Deep hole drilling machines* • General purpose pumping for low lubricating property
• All the applications in driving and high pressure lubrication where the use of the cast iron for the construction of the pump is a must (e.g.: MARINE and POWER GENERATION).
主要特征：
１、机械密封 ２、外置轴承－自润滑 ３、三螺杆加工精度高，性能优越 ４、硬化处理的高硬度螺杆
安装优点：
５、泵供油口法兰高于油箱盖板（见第６页） ６、轴向进油口
配件：
完整的电机泵组合（见第１２页） 可选阀块（见第２３页）
Main characteristics: 1 Seal 2 External ball bearing – life lubricated 3 Three rotors screw set with high accuracy
使用参数 ／ OPERATING DATA 介质－ Handled fluid
粘度范围 － Viscosity range 泵转速－ Pump speed
转向（从轴端看）－ Rotation (viewed from coupling end) 过滤精度－ Ｒｅｃｏｍｍｅｎｄｅｄｆｉｌｔｒａｔｉｏｎ
小提示： ＰＯ６ ，ＰＯ４，ＰＧＡ４，ＰＧ４ 全部是ｓｅｉｍ公司机床 冷却泵旧型号，完全能用新系列ＹＰＷＯ替代
Decades of experience by SEIM in Cooling and Lubricating applications find its finalization with the YPWO Series. This Series, born with the precedent
技术参数 ／ TECHNICAL CHARACTERISTICS 吸入压力－ Suction pressure 排出压力－ Delivery pressure
工作温度范围－ O perating temperature range 轴承类型－ Bearing type 轴承润滑－ Bearing lubrication 安装方式－ Mounting arrangement 进出口连接－ In let & Outlet connection
fluids • Central units for heat exchange and energy recover • Light fuel oils recirculation • Tanks filling and oils/fuel oils transfer.
* 5% oil (minimum)
三螺杆泵
THREE SCREW PUMP
SERIE 型号
YPWO
ＹＰＷＯ系列螺杆泵是ＳＥＩＭ公司在冷却润滑行业数十年经
验积累的结晶。
该系列，诞生于原先成功的ＹＰＯ６系列基础之上，集成了
ＹＰＯ６系列的所有优点，并且进一步提升了该泵的液压
效率，使其具有更加出色的性能。
该样本将帮助您选择最适合需要的ＹＰＷＯ系列泵。
结构试图
键
旋转密封 Rotary seal
轴承
单向阀可确保 密封区域的润 滑，垂直安装
外泄漏管
硬化处理 的铸铁泵体
至进口处 的回油管路
渗氮钢螺杆 渗氮钢驱动螺杆
1
ＳＥＩＭ ＹＰＷＯ系列泵配合ＳＥＩＭ的阀使用将极大优化泵的
工作状态，使之更安全可靠和容易控制。
联系我们获得详细的阀安装ቤተ መጻሕፍቲ ባይዱ数（参看２３页）。
过滤精度≤４０μｍ，不含磨损性污染物 ４０ ｍｉｃｒｏｎ ｍａｘ，ｓｕｔｉｏｎ ｓｉｄｅ ｓｉｄａ （ｎｏｔ ａｂｒａｓｉｖｅ ｃｏｎｔａｍｉａｎｔ） ＩＳＯ ４４０６ １９／１６ －ＮＡＳ １０
－０．５～１０ｂａｒ－ From -0,5 to 10 bar
连续工作高达１００ｂａｒ（乳化液），油介质可达１２０ｂａｒ，转速２９００ｒｐｍ Up to 100 bar continuos (water based emulsions) / 120 bar with oils, at 2900 rpm ０～１００℃（＊）－ From 0 to 100 °C (*) 有机械保护的径向密封（标准），机械密封（可选） Radial seal, with mechanical protection (standard), Mechanical Seal (optional) 长效润滑－ Life lubricated 水平或立式 Horizontal, or vertical (also vertical semi-submerged, thanks to the intermediate flange). 吸入口：ＢＳＰ螺纹，排出口：ＳＡＥ３０００－ Suction port: BSP thread - Delivery port: SAE 3000
the YPWO Series pump which most fit to your application
YPWO series features: • high efficiency • high reliability • low noise level • self priming capacity • minimum pulsations
tank lid (see page 6) 6 Axial inlet port Accessories: Complete motor pump assembly (see page 12) Optional valve block (see page 23)
SEIM YPWO Series pump finds natural complement when using a SEIM valve – should it be safety, or control. Contact SEIM to receive dedicated documentation, which includes also valve blocks fordirect mounting onto the delivery port of the pump (apply to page 23). TYPICAL SEIM SUPPLY INCLUDES: • pump complete by electric motor and drive coupling • safety and/or control valve (option) • tank lid complete with pipes and fittings for
冷却润滑（乳化液，含油至少５％）－切削液－轻质燃油ＬＦＯ，ＬＳＭＧＯ－ 重燃油（ＨＦＯ）－润滑油，矿物合成油 Cooling lubricants (water based emulsions, 5% min. content) - cutting oils -light fuel oils LFO, LSMGO - heavy fuel oils (HFO) - lube oils, mineral and synthetic types １～１０ｃＳｔ，最高４００ｃＳｔ－ From 1 to 10 cSt typical and up to 400 cSt (*) 乳化液和低润滑介质，２９００～３５００ｒｐｍ，其他粘度介质可使用不同的 转速。使用ＶＦＣ控制的电机：参看注脚（＊） From 2900 to 3500 rpm with emulsion and low lubricity fluids; other viscosities allow different speeds. Use with VFC controlled motors: apply to note on page foot. (*) 顺时针（逆时针转向订货需说明）－ CW (Std version ;CCW on demand )