NBCU(2014)：NBCU Vendor Document Request List_China
1 Vendor Document Request ListNBCUniversal 审核文件清单1. 工厂平面图 Site Layout2. 公司营业执照 Business License3. 厂长经理、在职安全主管人员的安全培训证书 Certificate of Safety Officer4. 环境影响评价报告和批复 Environmental Impact Assessment (EIA) and Approval5. 建设项目环保竣工验收（“三同时”,包括新、改、扩建项目）Environmental Protection Checkand Acceptance (EPCA) (including newly construction, renovation and expansion)6. 识别到的废水、废气等排放源清单 An inventory of all wastewater and air emission sources7. 污染物排放许可证 Pollution Discharge Permit8. 年度污染物排放申报登记表 Annual Pollution Discharge Registration (PDR)9. 环保监测报告（包括废水、大气污染物、厂界噪音）Pollutant Monitoring Report (includingwastewater/air emission/boundary noise)10. 危险废物转移联单 Hazardous Waste Transfer Manifest11. 危险废物处置商资质 Hazardous Waste Handling License12. 废弃物分类处理培训记录 Training Record On Handling and Separating of Wastes (2.12) 13. 一般废弃物的处置记录 Records of Non-hazardous Waste Disposal (2.12)14. 排水许可证（如适用）Wastewater Discharge Permit15. 环境污染治理设施运营资质（如适用）Operation License of Pollution Treatment Facility 16. 地下水取水许可证和水资源费缴纳凭据（如适用）Water Use Permit and Proof forContribution of Water Charge17. 辐射安全许可证（如适用）Radiation Safety Permit18. 安全和职业健康/劳动卫生竣工验收批复（“三同时”验收报告）Final Approval of Safety/HealthProtection Check and Acceptance (SPCA/HPCA)19. 安全生产许可证（适用于矿山、建筑施工企业和危险化学品生产企业）Work Safety Permit(WSP)20. 工业卫生监测报告 Industrial Hygiene Monitoring Report21. 职业病危害项目申报登记 Occupational Health Hazards Registration22. 职业病体检报告和定期体检政策，包括岗中，岗前和岗后 (Summary Reports of OccupationalHealth Check-up, including pre, on and post-employment, and Periodic Testing Policies (1.32&2.38)23. 食堂卫生许可证 Hygiene Permit for Canteen24. 食堂工作人员的健康证 Certification of Food Handlers (2.20a)25. 特种设备使用登记证和年检报告（锅炉、叉车、吊车/电动葫芦、压力容器、电梯等）SpecialEquipment Registration and Inspection Reports26. 特种设备操作证/特种作业上岗证 Operational License for Special Equipment/Work 27. 危险化学品经营许可证（如适用）Dangerous Chemical Business Permit28. 危险化学品运输资质和剧毒化学品运输许可证（如适用）License for Transportation ofHazardous/Toxic chemicals29. 剧毒化学品购买凭证（如适用）Proof-of-Purchase of Toxic Chemicals30. 易制毒化学品购买许可证或备案证明（如适用）Purchase Permit or Registration Certificate ofPrecursor Chemicals31. 风险评估 Risk Assessments (1.3)32. 工伤事故记录和事故调查程序Injuries/Accident Monthly/Yearly Records and AccidentInvestigation Procedures (1.5)2 33. 建设项目竣工的消防验收批复/备案证明（包括新、改、扩建项目）Fire Protection Check andAcceptance (FPCA) Approval/Registration34. 定期消防执法检查记录（公安消防部门，如适用）Regular On-site Inspection Records fromFire Bureau35. 危险化学品仓库允许存放量（由公安消防部门确定）Maximum Allowable Storage inHazardous Chemical Warehouse36. 消防演习记录 Fire/Evacuation Drill37. 应急预案 Emergency Preparedness Plan (1.8)38. 报警设备测试记录 Maintenance Records of Emergency Alarm Systems39. 员工身份证号码和进厂时间的汇总记录 Records of ID Number and Entry Date of Employees 40. 人事招聘和薪资政策 Personnel Recruitment and Compensation Policy41. 保护员工免受歧视和骚扰，以及允许工人自由结社的书面声明/政策 Discrimination,Harassment, and Freedom of Association Policies42. 员工投诉处理流程 Dispute Resolution Procedure43. 不使用狱工，抵押劳工，禁锢劳工，以及不强迫用工的政策 A Policy to Ensure They Do NotUse Involuntary, Prison, Bonded or Indentured Labor (2.2a)44. 急救箱检查和维护程序 First Aid Kit Inspection and Maintenance Program (2.17) 45. 洗眼器和紧急喷淋装置的检查记录 Maintenance Records for Eye Wash and EmergencyShowers (2.17)46. 机器的常规维护记录 Machine Maintenance Record (2.23)47. 关于危废管理的培训记录 Training Record on Hazardous Waste Management (2.32) 48. 管理、储存和运输危废的程序Inventory Management, Storage, and Transportation forHazardous Waste Procedure (2.32)49. 机器挂牌上锁程序，以及挂牌上锁的培训 LOTO Procedure and LOTO Training Records (2.35) 50. 急救人员急救技巧以及血液安全的培训记录（如适用） Training Record on First AidTechniques and Blood Borne Pathogens Safety (2.37)51. 医疗废弃物的转移联单（如适用）Medical Waste Manifests (2.37)52. 饮用水的检测报告（如适用）Laboratory Safety Test Data on Drinking Water (3.3) 53. 工厂所在地最低工资标准的文件 Local Government’s Document on Local Minimum Wage (4.2) 54. 工厂关于计件工资的政策（如适用）Piece Based Wage Policy (4.2)55. 员工的工作合同 Employment Contracts (4.15)56. 过去一年的工人的薪资表 Payroll Records at a minimum of one year57. 过去一年的工人的考勤记录 Time Records at a minimum of one year58. 过去一年用于发工资的银行对帐单 Bank Statement for Employee’s Salary59. 实习生使用情况记录 Intern Service Conditions60. 设备和生产工艺变化后的培训流程和培训纪录 Training Update Process (for changes of thefacility and production process) & Training records61. 化学品清单及主要化学品使用量或存储量（列明所有使用、储存、处理或生产的化学品）Aninventory of chemical used, stored, processed or manufactured, and the consumption or storage amount of major chemicals。
5G移动网络共享基站无线接入网配置指导手册
5G移动网络共享基站无线接入网配置指导手册1电联共建共享概述电联共建共享对通信网络基础设施或网络设备进行资源共享，以解决独立建网所带来的高昂的频谱牌照和网络部署费用等问题。
通信网络基础设施包括站址、机房设施、铁塔、电源设备等站点基础设施；网络设备包括基站、传输等电信网络设备。
1.1网络共享特性简介2独立4G双锚点+5G共享载波2.1部署步骤2.1.1L TE侧步骤（1）双方LTE侧锚点进行NSA改造、特性license加载。
2.1.2N R侧步骤（1）NR侧基本配置数据加载。
（2）NR共享改造数据加载。
（3）特性License加载。
2.1.3开通后观测NSA业务验证和调测。
2.2配置改造说明本章节以电信承建为例，说明NR和LTE侧的配置改造。
2.2.1N R侧配置数据配置设备数据ADD SUBRACK: CN=0, SRN=0, TYPE=BBU5900;ADD BRD: SN=7, BT=UMPT;ADD BRD: SN=16, BT=FAN;ADD BRD: SN=19, BT=UPEU;ADD BRD: SN=4, BT=UBBP, BBWS=GSM-0&UMTS-0<E_FDD-0<E_TDD-0&NBIOT-0&NR-1;ADD RRU: CN=0, SRN=150, SN=0, TP=TRUNK, RCN=0, PS=0, RT=AIRU, RS=NO,RN="AAU", RXNUM=64, TXNUM=64, MNTMODE=NORMAL,RFDCPWROFFALMDETECTSW=OFF, RFTXSIGNDETECTSW=OFF;配置核心网信息ADD GNBOPERATOR: OperatorId=0, OperatorName="telecom",OperatorType=SECONDARY_OPERATOR, Mcc="460", Mnc="01", NrNetworkingOption=NSA;ADD GNBOPERATOR: OperatorId=1, OperatorName="unicom",OperatorType=PRIMARY_OPERATOR, Mcc="460", Mnc="11", NrNetworkingOption=NSA;ADD GNBTRACKINGAREA: TrackingAreaId=0, Tac=4162;配置gNodeB共享模式MOD GNBSHARINGMODE: gNBMultiOpSharingMode=SHARED_FREQ;配置传输数据ADD ETHPORT: SN=7, SBT=BASE_BOARD, PN=1, PORTID=0, PA=FIBER, SPEED=25G,DUPLEX=FULL;ADD IPADDR4: ITFID=0, IP="10.18.0.2", MASK="255.255.255.0";ADD IPADDR4: ITFID=1, IP="10.107.17.114", MASK="255.255.255.0";ADD GNBCUS1: gNBCuS1Id=0, UpEpGroupId=0, UserLabel="5G S1 for telecom";ADD GNBCUS1: gNBCuS1Id=1, UpEpGroupId=20, UserLabel="5G S1 for unicom ";ADD GNBCUX2: gNBCuX2Id=0, CpEpGroupId=30, UpEpGroupId=30;配置小区数据ADD NRDUCELL: NrDuCellId=0, NrDuCellName="电联共享GHA00",DuplexMode=CELL_TDD, CellId=0, PhysicalCellId=0, FrequencyBand=N78, DlNarfcn=630000,UlBandwidth=CELL_BW_100M, DlBandwidth=CELL_BW_100M,SlotAssignment=7_3_DDDSUDDSUU, SlotStructure=SS102,TrackingAreaId=0,SsbDescMethod=SSB_DESC_TYPE_GSCN, SsbFreqPos=7811,LogicalRootSequenceIndex=1;ADD NRDUCELLOP: NrDuCellId=0, OperatorId=0;ADD NRDUCELLOP: NrDuCellId=0, OperatorId=1;MOD NRCELLALGOSWITCH: NrCellId=0, NsaDcSwitch=ON;激活NR小区ACT NRCELL:NrCellId=0;ACT NRCELL:NrCellId=1;2.2.2L TE侧改造脚本双方拟LTE侧作为锚点的基站需配置为NSA锚点站，以下为以北京电信承建区域配置为例说明LTE侧改造脚本，供参考。
移动5G华为L1试题单选+多选(有大部分答案)
单选(共50分)待检查1、下列设备中，不是室分小区验证测试工具的是（C）A.测试电脑B.便携式移动电源C.坡度仪D.SIM卡待检查2、在NSA option3x网络中，LTE和gnodeB的接口是什么CA.F1B.S1-UC.X2D.S1-C待检查3、5G系统的天线与800M/900M系统的水平隔离度与垂直隔离度分别要求在（）以上A.0.6M、0.3MB.0.5M、0.3MC.0.9M、0.7MD.1.5M、1.2M待检查4、华为系统中，NR小区的PoNominalPusch设置过大，将会导致（C）A.PUSCH的SINR低，对邻区干扰大B.PUSCH的SINR高，对邻区干扰大C.PUSCH的SINR高，对邻区干扰小D.PUSCH的SINR低，对邻区干扰小待检查5、华为系统中，NR小区的切换时间迟滞TimeToTrigger设置范围是（C）A.0-1280B.0-640C.0-5120D.0-2560待检查6、设备应支持对不同用户授予（C）权限A.相似B.相同C.不同D.相近待检查7、gNB与eNB之间使用哪种接口?（B）A.F1B.X2C.S1D.S1-X2待检查8、命令（D ）可以显示与IP、TCP、UDP协议相关的统计数据，用于检验本机各端口的网络连接情况。
A.iostatB.sysconfigC.ifconfigstat待检查9、在3GPP协议中，5G的总体频谱资源可以分为几个FR（Frequency Range)? AA.2B.1C.4D.3待检查10、如果对于抄表物联网做切片设计，如下哪个功能可以考虑做剪裁？（D）A.会话管理功能B.话单功能C.设备管理功能D.移动性管理功能待检查11、华为OMC系统中，A3的幅度迟滞（Hysteresis）的单位是（A）分贝A.0.5B.2C.4D.1待检查12、5G试点时，对于电源柜空开的要求是（D）A.单路160A，双路100AB.单路100A，双路63AC.单路160A，双路63AD.单路100A，双路80A待检查13、Linux文件系统中创建一个新的目录指令是哪个选项（B ）？A.cdB.mkdirC.rmD.ls待检查14、5G无线帧长是多少ms（A）A.10B.40C.5D.20待检查15、华为5G NR设备中，小区的收发模式由参数NRDUCellTrp.TxRxMode配置，请问如下描述正确的选项是哪个?（B）A.小区支持TDD模式下的收发模式：Macro支持8T8R、64T64R，LampSite支持2T2R、4T4R；B.小区支持TDD模式下的收发模式：Macro支持2T2R、8T8R、64T64R，LampSite支持2T2R；C.小区支持TDD模式下的收发模式：Macro支持2T2R、32T32R、64T64R，LampSite支持2T2R； D.小区支持TDD模式下的收发模式：Macro支持8T8R、32T32R、64T64R，LampSite支持2T2R、4T4R；待检查16、在FDD+TDD的混合场景下，华为“基站时钟同步模式”应设置为（D）A.FREQ频率同步B.其他选项均不对C.HYBRID混合模式D.TIME时间同步待检查17、下面哪个信令可以携带SCG Add或PSCell Change相关SCG配置DA.LTE侧的RRCConnectionSetupB.NR侧的RRCConnectionSetupC.NR侧的RRCReconfigurationD.LTE侧的RRCConnectionReconfiguration待检查18、以下哪项不是在交换机上划分VLAN的好处？AA.减少广播风暴B.便于管理C.更加安全D.便于用户带宽限制待检查19、关于华为5G BBU单板指示灯，RUN指示灯绿灯闪烁（1s亮，1s灭），说明什么？BA.单板正在加载软件或数据配置B.单板正常运行C.无电源输入或单板处于故障状态D.有电源输入，单板存在故障待检查20、广播波束倾角设置为7度，方位角设置为220度，若要覆盖更远可调整（C）A.方位角调整至200度B.倾角调整至10度C.倾角调整至5度D.方位角调整至240度待检查21、下列选项中哪个是5G NR下PUCCH配置特点（B）A.固定14个符号B.灵活长度C.跳频D.系统带宽两端待检查22、5G NR采用Massive MIMO技术，支持广播权值灵活设计和自适应调整，包括“方位角偏移、下倾角、水平波瓣宽度、（B）”的四个维度，通过后台网管平台即可远程实施对前台基站的覆盖调整和优化。
钢种对照表
對應的國標表示方法 舊國標牌號 0Cr18Ni11Nb 1Cr19Ni11Nb 0Cr25Ni20 00Cr18Ni5Mo3Si2 1Cr13 NS142 NS142 NS142 國標數字代號 S34778 S34779 S31008 S39042 S31053 S31252 S21953 S23043 S22253 S22053 S25073 S27603 S41010 H01402 H01402 H01402 -
常熟 五碼鋼種 30400 30405 30406 304L7 304L6 304L5 304L4 304LH 304LR 304LN 31600 316H0
說明 304 304H 304H高鉻(Cr: 19.0-20.0)（巴威） 304L低鎳(Ni:8.05~9) 304L(控微量元素) (Millennium 汽車管) 304L高鎳(Ni:10.05~12) 304L高硫(S:0.02~0.03) 304L中鎳(Ni:9.05~12) 304L中硫(S:0.005~0.015) 304LN(304L加氮） 316 316H
347H1 347H0 347FG S304H HR3C0 310S0 310H0 31400 904L0 25220 25400 18050 23040 22051 22050 22052 25075 25076 T9100 P9100 P9000 P2200 T9200 T9000 41000 N800L N8800 N8811 N8020 N8028 N8825 N825A N825L N6600 N6625 N6617 N6690 N4400 N2200 N2201
SUS329J3LTP SUS329J3LTB SUS410TB -
常熟 五碼鋼種
Vendor Document Request List of 2012 NBCUniversal 审核文件清单
1Vendor Document Request List of 2012NBCUniversal 审核文件清单1.工厂平面图 Site Layout 2.公司营业执照 Business License 3.厂长经理、在职安全主管人员的安全培训证书 Certificate of Safety Officer 4.环境影响评价报告和批复 Environmental Impact Assessment (EIA) and Approval 5.建设项目环保竣工验收（“三同时”,包括新、改、扩建项目）Environmental Protection Check and Acceptance (EPCA) (including newly construction, renovation and expansion) 6.识别到的废水、废气等排放源清单 An inventory of all wastewater and air emission sources 7.污染物排放许可证 Pollution Discharge Permit 8.年度污染物排放申报登记表 Annual Pollution Discharge Registration (PDR) 9.环保监测报告（包括废水、大气污染物、厂界噪音）Pollutant Monitoring Report (including wastewater/air emission/boundary noise) 10.危险废物转移联单 Hazardous Waste Transfer Manifest 11.危险废物处置商资质 Hazardous Waste Handling License 12.废弃物分类处理培训记录 Training Record On Handling and Separating of Wastes 13.一般废弃物的处置记录 Records of Non-hazardous Waste Disposal 14.排水许可证（如适用）Wastewater Discharge Permit 15.环境污染治理设施运营资质（如适用）Operation License of Pollution Treatment Facility 16.地下水取水许可证和水资源费缴纳凭据（如适用）Water Use Permit and Proof for Contribution of Water Charge 17.辐射安全许可证（如适用）Radiation Safety Permit 18.安全和职业健康/劳动卫生竣工验收批复（“三同时”验收报告）Final Approval of Safety/Health Protection Check and Acceptance (SPCA/HPCA) 19.安全生产许可证（适用于矿山、建筑施工企业和危险化学品生产企业）Work Safety Permit (WSP) 20.工业卫生监测报告 Industrial Hygiene Monitoring Report 21.职业病危害项目申报登记 Occupational Health Hazards Registration 22.职业病体检报告和定期体检政策，包括岗中，岗前和岗后 Summary Reports of Occupational Health Check-up, including pre, on and post-employment, and Periodic Testing Policies 23.食堂卫生许可证 Hygiene Permit for Canteen 24. 食堂工作人员的健康证 Certification of Food Handlers25. 特种设备使用登记证和年检报告（锅炉、叉车、吊车/电动葫芦、压力容器、电梯等）SpecialEquipment Registration and Inspection Reports26. 特种设备操作证/特种作业上岗证 Operational License for Special Equipment/Work27. 危险化学品经营许可证（如适用）Dangerous Chemical Business Permit28. 危险化学品运输资质和剧毒化学品运输许可证（如适用）License for Transportation ofHazardous/Toxic chemicals29. 剧毒化学品购买凭证（如适用）Proof-of-Purchase of Toxic Chemicals30. 易制毒化学品购买许可证或备案证明（如适用）Purchase Permit or Registration Certificate ofPrecursor Chemicals31. 风险评估 Risk Assessments32. 工伤事故记录和事故调查程序Injuries/Accident Monthly/Yearly Records and AccidentInvestigation Procedures233. 建设项目竣工的消防验收批复/备案证明（包括新、改、扩建项目）Fire Protection Check andAcceptance (FPCA) Approval/Registration34. 定期消防执法检查记录（公安消防部门，如适用）Regular On-site Inspection Records fromFire Bureau35. 危险化学品仓库允许存放量（由公安消防部门确定）Maximum Allowable Storage inHazardous Chemical Warehouse36. 消防演习记录 Fire/Evacuation Drill37. 应急预案 Emergency Preparedness Plan38. 报警设备测试记录 Maintenance Records of Emergency Alarm Systems39. 员工身份证号码和进厂时间的汇总记录 Records of ID Number and Entry Date of Employees40. 人事招聘和薪资政策 Personnel Recruitment and Compensation Policy41. 保护员工免受歧视和骚扰，以及允许工人自由结社的书面声明/政策 Discrimination,Harassment, and Freedom of Association Policies42. 员工投诉处理流程 Dispute Resolution Procedure43. 不使用狱工，抵押劳工，禁锢劳工，以及不强迫用工的政策 A Policy to Ensure They Do NotUse Involuntary, Prison, Bonded or Indentured Labor44. 急救箱检查和维护程序 First Aid Kit Inspection and Maintenance Program45. 洗眼器和紧急喷淋装置的检查记录 Maintenance Records for Eye Wash and EmergencyShowers46. 机器的常规维护记录 Machine Maintenance Record47. 关于危废管理的培训记录 Training Record on Hazardous Waste Management48. 管理、储存和运输危废的程序Inventory Management, Storage, and Transportation forHazardous Waste Procedure49. 机器挂牌上锁程序，以及挂牌上锁的培训 LOTO Procedure and LOTO Training Records50. 急救人员急救技巧以及血液安全的培训记录（如适用） Training Record on First AidTechniques and Blood Borne Pathogens Safety51. 医疗废弃物的转移联单（如适用）Medical Waste Manifests52. 饮用水的检测报告（如适用）Laboratory Safety Test Data on Drinking Water53. 工厂所在地最低工资标准的文件 Local Government’s Document on Local Minimum Wage54. 工厂关于计件工资的政策（如适用）Piece Based Wage Policy55. 员工的工作合同 Employment Contracts56. 过去一年的工人的薪资表 Payroll Records at a minimum of one year57. 过去一年的工人的考勤记录 Time Records at a minimum of one year58. 过去一年用于发工资的银行对帐单 Bank Statement for Employee’s Salary59. 实习生使用情况记录 Intern Service Conditions60.设备和生产工艺变化后的培训流程和培训纪录 Training Update Process (for changes of the facility and production process) & Training records61. 化学品清单及主要化学品使用量或存储量（列明所有使用、储存、处理或生产的化学品）Aninventory of chemical used, stored, processed or manufactured, and the consumption or storage amount of major chemicals。
中国移动网上大学无线-5G网优-华为-L1-201908
正在作答 : 无线 -5G 网优 -华为 -L1-201908*已切屏次数： 0*本卷共 150 题，总分 100 分*已答： 0*未答： 150单选 (共 50 分)//待检查1、下面哪个信令可以携带SCG Add 或 PSCell Change 相关 SCG 配置（）A. NR 侧的 RRCReconfigurationB. LTE 侧的 RRCConnectionSetupC. LTE 侧的 RRCConnectionReconfigurationD. NR 侧的 RRCConnectionSetup// 待检查2、假如当前系统是在level3运行，怎样不重启系统就可转换到level 5 运行（）？A. run 5B. Set level = 5C.ALT-F7-5D.telinit 5//待检查3、 SA 场景下， 5G 至 4G 的切换事件设置为 A1+A2+B1 ，且门限设置如下： A1=-111dBm， A2=-115dBm ，B1=-111dBm ，若要切换至 4G 更容易可修改（）A.A1=-105B.B1=-108C.B1=-115D.A2=-110//待检查4、 LTE 测量 NR ，测量的基本单位是（）。
A.载波B.PLMNC.BeamD.小区//待检查5、 Linux 与 windows 文件共享，需要用什么daemon?A.smbdB.bindC.shardD.nmbd//待检查6、关于 SS/PBCH Blocks 的描述正确的是? ( )A. EN-DC 下，若 SS/PBCH Blocks 的周期没有定义，则默认的周期为 20msB.SS/PBCH Blocks 传输窗内最大数目的 SS/PBCH Block 可以是 16C. SS/PBCH Blocks 的周期可以是 5/10/20/40/80/160msD. SS/PBCHBlock 的传输是在 1 个系统帧的时间窗内//待检查7、 Oracle 数据库中 SGA 不是由以下哪个组成：A. Shared poolB.PGAC.Redo log bufferD.Buffer Cache// 待检查8、 Massive MIMO 技术应用于5G 建设， Massive MIMO 基线设置为水平扫描范围105 度，水平面波束个数7+1，垂直扫描范围 6 度，垂直面波束个数 2 个；当 Massive MIMO SSB 广播波束的水平扫描范围为25 度，水平面波束个数为 2 个，垂直扫描范围为 25 度，垂直面波束个数为 4 个时，波束应用场景为哪个？（）A.适用于楼宇深度覆盖，垂直维度的波束增益较高B.适用于室外水平面覆盖，水平维度的波束增益较高C.适用于广范围立体浅覆盖，但是水平范围较默认值设置小D.水平覆盖范围受限，主要应用于峰值场景，节约开销//待检查9、华为 BBU5900 的 UMPT 单板的端口中，哪个是用于BBU 互联的？A.FE/GE0B.E1/T1C.XGE3D.CI//待检查10、 SCG 的主小区被称作()A. MCG Secondary cellB. SCG Secondary cellC. Primary cellD.PSCell//待检查11、在何种状态下可以为路由器改名？A.接口模式B.超级模式C.普通模式D.全局模式//待检查12、在 5G 中 PDSCH 最大调制是（）A. 256QAMB.64QAMC.512QAMD.128QAM//待检查13、 AAU5619 的输入电压为（）A. DC -48VB. DC -100VC. DC -150VD. DC -80V//待检查14、 NR PCI 数量是多少个？（）A.1512B.504C.2016D.1008//待检查15、下列关于 NR slot format 说法正确的是（）A. 对 DL/UL 分配的修改以 slot 为单位B. 在 R15，UE-specific 配置的周期和 cell-specific 配置的周期可以不一致 C. SCS=60KHz 时，支持配置 Periodic=0.625msD. Cell-specific 的单周期配置中，单个配置周期内只支持一个转换点//待检查16、包过滤防火墙对信息流不检测的信息是A.到达接口B.数据包头信息C.连接状态信息D.传输层头部选项和标志位//待检查17、 5G NR 用户面新增了哪一个子层？A.SCTPB.NASC.PDCPD.SDAP//待检查18、一个公司有 50 个私有 IP 地址，管理员使用 NAT 技术将公司网络接入公网，但是该公司仅有一个公网地址，则下列哪种NAT 转换方式符合需求?A.NAPTB.easy-ipC.动态转换D.静态转换//待检查19、下列对 TCP 下行灌包描述正确的是（）A. TCP 下行灌包是核心网服务器和客户端服务器（连接TUE 或 CPE）都作为接收端B. TCP 下行灌包是核心网服务器和客户端服务器（连接TUE 或 CPE）都作为发送端C. TCP 下行灌包是客户端服务器（连接TUE 或 CPE）作为发送端，核心网服务器作为接收端D. TCP 下行灌包是核心网服务器作为发送端，客户端服务器（连接TUE 或CPE）作为接收端//待检查20、 IT 审计属于信息安全的范畴指？A. 审查 IT 服务器B. 审查 IT 数据库C. 审查 IT 网络安全设备D. 审查 IT 信息系统//待检查21、 NSA 场景下， NSA 辅站侧评估维度指标不包含（）A. SgNB 异常释放率B. SgNB 接入成功率C. SgNB Pscell 变更成功率D. Qos Flow 建立//待检查22、 5G-NR 的信道带宽利用率最高可达（）A.98.28%B.92.46%C.90%D.96.86%//待检查23、对于通过 IP 协议进行远程维护的设备，设备应支持使用（）加密协议。
《汽车等待的时候》之语法隐喻浅析
慕之情 ， 便假装为一位高贵的女士 ； 而这位男士也恰 恰 隐瞒 了其 真 实 身 份 ， 装 成 一个 出身 卑 微 的饭 店 伪 收银 员— —这 其 实 是 女 主 人 公 的 真 实 身 份 。 同 时 ， 文 中还有 其 他 错 位 的描 写 ： 如本 属 于男 主人 公 的那 辆豪华小轿 车， 女主人公 欺骗道是她 的车。尽 管故 事结尾很具讽刺性 ， 作者 却丝毫没有鄙 视他们 的意 思， 只是 留下 一些空 间 给予人 们去反 思 。 二、 评价 理论及 语 法隐喻 交 流 的一 个 主要 目的 是 与 他 人 进 行 互 动 ， 比如 建 立和 维 护恰 当 的社 会 关 系 。基 于 这 点 ， 礼 德 提 韩 出语言 具有 三个元 功 能 ， 即人 际功 能 、 念 功 能 和语 概 篇 功 能 ； 评 价 是 实 现 人 际 功 能 的 重 要 手 段 。 而 Ｔ ｏ ｐｏ 出 ，评 价 是 文 章 意 义 的一 个 核 心 部 分 ， ｈｍ ｓｎ指 “ 文 章 的 一 切 人 际 意 义 分 析 都 必 须 把 评 价 纳 入 其 中” ［２由此可 见 ， 价研究 具有 重要 意义 。 。３９ ］ 评
它 沉 。 他在《 功能语法介绍》 最后・章 中指 出， 隐喻不仅仅 情 的影 响”， 的字 面 意 义是 “ 重 的东 西 ” 因此 ， 翻译 ” 如下 ： 存在于词汇层 ， 同时也可存在于语法层 ； 因此他提出 上述 例句 也可 “ （ １ Ｔ ｅｎ ｒ ｉ ｃｌ ｓｕｔ ｎｂｃｕ ｅｏ ａ ） ｈ ｏ ｈｉ ｉ ａｄｆ ｕｔ ｉ ａｉ ｅａ ｓ ｆ ｔ ｓｎ ｉ ｔ ｏ 了一个新 的隐喻术语 ： 语法隐喻。在该 书中， 他首次 ｉ 对语法隐喻做了系统 的描述。另外 ， 他清楚地表 明， ｔ ｅ ｅｆｃ ｓｏ ｈ ｎ ｕ ｔ ａ ｅ ｏｕ ｉ ｎ ｈ ｆｅ ｔ ｆｔ ｅ ｉｄ ｓｒ ｌｒｖ ｌ ｔｏ ．
5G业务技能竞赛-题库(电信)
电信题库一、单选题1、5G基本时间单位是（B）2、5G中新增的参考信号是（D ）3、NSA 3x模式下，attach accept消息在空口通过哪个网元发送（C）：4、NSA架构下开环功控参数和上行功率分配参数通过那条RRC消息发给UE：（A）5、在5G NR组网时，电信、移动最大的差异是什么（C）A.是否与LTE共站B.基站发射功率C.工作频段的差异、上下行时隙配比的区别D.是否采用SUL6、PT-RS信道EPRE与下面那个信道的EPRE相同：（B）7、PDSCH DMRS RE功率与下列无关的是：（A）—的TB块大小DMRS类型是否使用256QAM调制方式RE功率8、5G中支持覆盖距离100Km的Prach格式是（B）9、LTE和NR组成双连接关系，在使用EPC和5GC时基站之间的接口分别称为（C），Xn ，X2，Xn D.以上都不对10、NSA Mode 3x双连接需要LTE基站与5G基站之间的互操作，并且使用（A）做为核心网核心网核心网%11、下列哪个不是5G定义的子载波间隔（D）12、在NSA option 3x网络中，LTE和gnodeB的接口是什么（D）13、哪个接口处于PDCP（gNBCU处理）和RLC（gNBDU处理）之间（A）…14、下列哪个接口用于S-GW和gNB之间的用户数据传输（D）15、下列哪种网络架构不需要LTE基站（A）234 516、NSA 3x模式下，EN-DC X2 SETUP REQUEST是从哪个网元发生到哪个网元（A）小区发送至SgNB小区小区发送至MeNB小区发送至MeNB 发送至EPC17、NSA架构下支持双连接的UE的NR上行功控参数由那个网元下发：（B）》D.以上都是18、Option 3X架构中，承载在哪个网元上被分流：（C）19、Option 3X架构中，用户面数据在gNB内的哪个实体上被分流到MeNB：（D）20、在3x架构中，gNB与EPC直接相连的是（B））21、5G的PRACH支持的格式有多少种（D）22、关于信道带宽、子载波带宽与支持的PRB数量，下面哪个描述正确（A）A.相同子载波带宽时，信道带宽越宽，则可用PRB数量越多B.相同信道带宽时，子载波带宽越高，所能支持的PRB数量越多C.对于FR1和FR2，相同的信道带宽和子载波带宽能支持同样数量的PRB数D.信道带宽和子载波带宽与PRB数量没有关联23、链路预算的目的是什么（D）。
西文字体版权知识分享
• 1.Redistribution（再分发）：此权限关系到用户是否能 够传播该软件。 • mercial use（商业使用）：通常在该关键词前后会 带有是否可以的限定。另外，任何用在能够盈利的项目上 都算商业使用的范畴，包括间接（广告平台）与直接（售 卖）的盈利。 • 3.Modif 否能够对该软件进行修改。*若能够进行修改的话通常会 有另外的命名向的要求，例如演绎作品不可使用原始署名 等。
• 著作权人可以禁止或许可： -以各种形式对各种著作进行重制。 -将其著作公开口述、演出。 -将其著作通过无线电、有线或卫星或互联网加以公开播送、公开
传输。
-对其视听著作公开上映；对其摄影著作、美术著作、图形著作加 以公开展示。 -将其著作翻译成其他语言，或对其加以改编，例如将小说改编成 影视剧本、将英文版本改译为中文版本。 • 受著作权保护的许多创作性作品，需要进行大量发行、传播和投资，才 能得到推广（例如：出版物、音乐作品和电影）。因此著作权人常常将 其对作品享有的权利，授权给最有能力推销作品的个人或公司，以获得 报酬。这种报酬经常是在实际使用作品时才支付，因此被称作授权费／ 版税。 • 著作财产权有时间限制，根据世界知识产权组织相关条约，该时限为创 作者死后50年。但各国国情不同，各国国内法可规定更长的时限。例如 美国该时限为作者逝世后70年。
• 2.保留一份证明你是第一个发布此字形的书面证明（或PDF）。 在这份证明中，要包含所设计字体的所有字体骨架、对于你所创 造的这款字体的说明，与清晰的全字符集。在PDF中，尽量使用 高度压缩的jpg格式，并且不要将你的字体嵌入其中。 • 3.如果有条件的话，设计师可以在商标局（Trademark registration office）将自己的字体名称注册为商标。但这样 做很麻烦，因为你需要在所有你希望保护你字体商标的国家重复 这个步骤，虽然美国的商标局能够提供这个服务，但是这个方法 比较花钱。
UL 认证证书说明书
Certificate Number 20171128-E135493Report ReferenceE135493-A36-ULIssue Date2017-NOVEMBER-28Bruce Mahrenholz, Director North American Certification ProgramUL LLC Issued to:VICOR CORP25 FRONTAGE RDANDOVER, MA 01810-5424 UNITED STATESThis is to certify thatrepresentative samples ofPower Supplies for Information Technology Equipment Including Electrical Business Equipment See Addendum.Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate.Standard(s) for Safety:UL 60950-1, (Information Technology Equipment - Safety - Part 1: General Requirements)CAN/CSA C22.2 No. 60950-1-07, (Information Technology Equipment - Safety - Part 1: General Requirements) Additional Information:See the UL Online Certifications Directory at /database for additional informationOnly those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service.The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog number, model number or other product designat ion as specified under “Marking” for the particularRecognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark: , may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions.Recognized components are incomplete in certain constructional features or restricted in performancecapabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC.Look for the UL Certification Mark on the product.Certificate Number 20171128-E135493Report ReferenceE135493-A36-ULIssue Date2017-NOVEMBER-28Bruce Mahrenholz, Director North American Certification ProgramUL LLC This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements.DC-DC ConverterModel: Low Voltage 3814 VIA BCM and VIA NBM Series(see Additional Information or Miscellaneous Enclosure 7-01 for Model nomenclature)UL TEST REPORT AND PROCEDUREThis is to certify that representative samples of the products covered by this Test Report have been investigated in accordance with the above referenced Standards. The products have been found to comply with the requirements covering the category and the products are judged to be eligible for Follow-Up Service under the indicated Test Procedure. The manufacturer is authorized to use the UL Mark on such products which comply with this Test Report and any other applicable requirements of UL LLC ('UL') in accordance with the Follow-Up Service Agreement. Only those products which properly bear the UL Mark are considered as being covered by UL's Follow-Up Service under the indicated Test Procedure.The applicant is authorized to reproduce the referenced Test Report provided it is reproduced in its entirety.UL authorizes the applicant to reproduce the latest pages of the referenced Test Report consisting of the first page of the Specific Technical Criteria through to the end of the Conditions of Acceptability.Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. Prepared by: James C. Powley Reviewed by: Lesley GreenLow Voltage VIA BCM and VIA NBM Model Matrix: AAA3814cddewwxxyzz Example: BCM3814V60E15A3T01。
End-UserUndertaking（EUU）Form-ExARMYUK
Guidance for UK LicenseesAn undertaking is required when applying for a Standard Individual Export Licence (SIEL) or Standard Individual Trade Control Licence (SITCL) issued by the UK‟s Export Control Organisation, part of the Department for Business, Innovation and Skills. This undertaking forms part of the required supporting documentation for End-Use Control purposes which is provided when making a licence application to the ECO.Please note that we will only normally accept undertakings as valid within 6 months of the date of the application.There are two types of undertaking forms available. Which one you – the licensee - obtain in support of your application depends on how the items will be used.If goods are being shipped (whether via a consignee or not):∙for their end-use or if an end-user is incorporating the goods (ie installing them into another product or higher level system) – then you should obtain an End-User Undertaking (EUU) Form.∙to be held in stock for future delivery or re-sale – then you should obtain a Stockist Undertaking (SU) Form.If the overseas company chooses not to use the relevant template, then you should advise them that the UK Authorities (ie ECO) require an original (not …digital‟) signed and dated undertaking in English on their headed paper providing the same information and assurances.IT IS THE UK LICENSEE’S RESPONSIBILITY TO ENSURE THA T:∙The correct undertaking type - i.e. EUU or SU - is supplied with your licence application to cover the relevant scenario. An incorrect undertaking type will not be accepted by ECO and willtherefore need to be resubmitted, which is likely to result in your application being delayed orwithdrawn.∙All sections of the undertaking are completed legibly and in English (or accompanied by an authorised translation, including header details, if written in a foreign language) by the End User or Stockist End User on their original official headed paper (where the End User is a company ora legal entity). The English translation should be verified by the licensee - that is the owner of thebusiness applying for a licence, or a partner, director or company secretary of the firm, or anyone authorised to sign the licence application on behalf of the company. Alternatively, if you prefer,translations may be verified by a member of the Institute of Translators or a Notary Public.∙The undertaking form needs to be signed and dated by a person properly authorised by the End User organisation or Stockist End User organisation to sign on their behalf (the responsible official). …Digital‟ signatures are not acceptable.∙The same responsible official of the End User organisation or Stockist End User organisation should also complete, sign, date and attach a covering letter (ie: see Annex A to either EUU or SU Form). This letter must be on their original official headed paper. It should also beaccompanied by an authorised translation if written in a foreign language (please see aboveregarding verification of authorised translations). If the End User or Stockist End user is anindividual then the documents do not have to be on letter headed paper∙Copies of the relevant form and covering letter should be attached to the completed licence application on ECO‟s SPIRE database –https://∙The original EUU or SU together with the Covering Letter must be obtained and kept by you at your premises. These original documents may be requested by ECO at any time.∙To help reduce further …requests for information‟ from ECO during licence processing you should establish as part of your standard procedures whether the items are being shipped to an end user or a stockist and forward the relevant guidance to them about which form to complete and how to complete it correctly.∙If we request a revised EUU during processing of your application, it should include all of the EUU pages and be newly dated.∙Be mindful of references to any unfamiliar abbreviations or acronyms particularly those referring to consignees or end-users. To avoid requests for information (RFIs) from ECO which might delay your application, acronyms should be spelt out in full.Guidance for end-users to complete template and covering letterThis End User Undertaking (EUU) Form and A nnex A must be provided when you order goods which are to be used by you (whether via a Consignee or not). Both documents must be completed on you r company’s letter headed paper. Please note that if you are an individual these documents do not have to be on letter headed paper.Please read the following ‘Explanation of Terminology’ carefully for guidance on completing th e EUU form.1The UK Licensee is the person or body who is either exporting the goods abroad, or brokering the movement of the goods concerned, each of which may be direct to you or via a separateconsignee.2If not known, the Licensee‟s Reference can be left blank for completion by the Licensee.3The Consignee is the person or body, who is the first recipient of the goods .This can be yourselves or it can be another person or body within your country or in another country. If you are both the Consignee and the End User, then you must enter your own details in boxes (c) and(d).4As the End User you will be receiving the goods for end-use so boxes (e) and (f) must be completed. If you incorporate the goods into another product or higher level system, then youare still the End User for the purposes of the movement of the items.5 The End User in this section refers to the entity at the time of shipment.6The goods in this section refer to those at the time of shipment. NB: If goods are being incorporated into another product or higher level system then this information should be included in Section 3.7The UK Authorities need to understand what the goods are and so a detailed description of the main item or items is required. If, for example, the main item or items are accompanied by a long list of spares, components or accessories, you should also indicate this in section 2.8If the goods are to be …incorporated‟ by you (ie: installed into another product or higher level system) then that product/higher level system, its use and ultimate end user (which may be within or outside your destination) should be described where known in Section 3.9Section 4 must be signed and dated by you as the End User since you are using the goods mentioned in Section 2. This includes where you incorporate the goods into another product or higher level system. This section should be signed and dated by a person within yourorganisation with authority to sign on behalf of the company/organisation. …Digital‟ signatures are not acceptable10For an up-to-date list of applicable destinations subject to arms embargoes, please go to the export control pages of the Businesslink website and access the link to “Current ExportRestrictions”EUU FORM SECTION 1 – PA RTIESSECTION 2 – GOODSSECTION 3 – END-USE OF THE GOODSSECTION 4 – END-USER UNDERTA KING 9 (to be completed by the person or body named in 1(e) and 1(f))We – the person or body named at 1(e) and 1(f) – certify that we are the end-user of the goods described in Section 2, which are to be supplied by the licensee named in 1(a). We further certify that we shall use the goods for the purposes described in Section 3; that the goods will not be used for any purpose connected with chemical, biological or nuclear weapons, or missiles capable of delivering such weapons; that they will not be re-exported or otherwise re-sold or transferred if it is known or suspected that they are intended or likely to be used for such purposes; that the goods will not be re-exported or otherwise re-sold or transferred to a destination subject to UN, EU or OSCE embargo where that act would be in breach of the terms of that embargo 10; and that the goods, or any replica of them, will not be used in any nuclear explosive activity i or unsafeguarded nuclear fuel cycle ii.Sign Here_____________________________Date________________(Signature of official of End User)Print Name_____________________________(Add Name of Signatory in Capitals)Role_____________________________(Add Job Title of Signatory in Capitals)Notei includes research on or development, design, manufacture, construction, testing or maintenance of any nuclearexplosive device or components of subsystems of such a device.ii includes research on or development, design, manufacture, construction, operation or maintenance of any reactor, critical facility, conversion plant, fabrication plant, reprocessing plant, plant for the separation of isotopes of source or special fissionable material, or separate storage installation, where there is no obligation to accept IAEA safeguards at the relevant facility or installation, existing or future, when it contains any source or special fissionable material; or of any heavy water production plant where there is no obligation to accept IAEA safeguards on any nuclear materialproduced by or used in connection with any heavy water produced therefrom; or where any such obligation is not met.ANNEX A TO EUU FORM Model covering letter for End User Undertaking [to be amended where indicated][NAME AND ADDRESS OF END USER ON THEIR ORIGINAL HEADED PAPER][DATE]End User Undertaking relating to the UK licence application made by [ST A TE NAME OF LICENSEE]I attach a completed End User Undertaking made on the EUU FormYours sincerely[TO BE SIGNED BY THE SAME SIGNATORY WHO COMPLETED ANDSIGNED THE END USER UNDERTAKING (EUU) FORM TOGETHER WITH THEIR ROLE]。