DN Product description

合集下载

MEMORY存储芯片NAND02GW3B2DN6E中文规格书

Table 3: FBGA 84-Ball – x16 and 60-Ball – x4, x8 Descriptions (Continued)2Gb: x4, x8, x16 DDR2 SDRAM Ball Assignments and DescriptionsFigure 55: x4, x8 Data Output Timing – t DQSQ, t QH, and Data Valid WindowDQ DQ DQ DQ DQ DQ DQS#DQS 3CKCK#T1T2T3T4T2n T3n Data valid window Data valid window Data valid window Data valid windowNotes: 1.t HP is the lesser of t CL or t CH clock transitions collectively when a bank is active.2.t DQSQ is derived at each DQS clock edge, is not cumulative over time, begins with DQS transitions, and ends with the last valid transition of DQ.3.DQ transitioning after the DQS transition defines the t DQSQ window. DQS transitions at T2 and at T2n are “early DQS,” at T3 are “nominal DQS,” and at T3n are “late DQS.”4.DQ0, DQ1, DQ2, DQ3 for x4 or DQ[7:0] for x8.5.t QH is derived from t HP: t QH = t HP - t QHS.6.The data valid window is derived for each DQS transition and is defined as t QH - t DQSQ.2Gb: x4, x8, x16 DDR2 SDRAM READDDR2 SDRAMMT47H512M4 – 64 Meg x 4 x 8 banks MT47H256M8 – 32 Meg x 8 x 8 banks MT47H128M16 – 16 Meg x 16 x 8 banksFeatures•V DD = 1.8V ±0.1V, V DDQ = 1.8V ±0.1V•JEDEC-standard 1.8V I/O (SSTL_18-compatible)•Differential data strobe (DQS, DQS#) option•4n-bit prefetch architecture•Duplicate output strobe (RDQS) option for x8•DLL to align DQ and DQS transitions with CK •8 internal banks for concurrent operation •Programmable CAS latency (CL)•Posted CAS additive latency (AL)•WRITE latency = READ latency - 1 t CK •Programmable burst lengths: 4 or 8•Adjustable data-output drive strength•64ms, 8192-cycle refresh•On-die termination (ODT)•Industrial temperature (IT) option•RoHS-compliant•Supports JEDEC clock jitter specification Options1Marking •Configuration–512 Meg x 4 (64 Meg x 4 x 8 banks)512M4–256 Meg x 8 (32 Meg x 8 x 8 banks)256M8–128 Meg x 16 (16 Meg x 16 x 8 banks)128M16•FBGA package (Pb-free) – x16–84-ball FBGA (11.5mm x 14mm) Rev. A HG •FBGA package (Pb-free) – x4, x8–60-ball FBGA (11.5mm x 14mm) Rev. A HG •FBGA package (Pb-free) – x16–84-ball FBGA (9mm x 12.5mm) Rev. C RT •FBGA package (Pb-free) – x4, x8–60-ball FBGA (9mm x 11.5mm) Rev. C EB •FBGA package (Lead solder) – x16–84-ball FBGA (9mm x 12.5mm) Rev. C PK •Timing – cycle time– 1.875ns @ CL = 7 (DDR2-1066)-187E– 2.5ns @ CL = 5 (DDR2-800)-25E– 2.5ns @ CL = 6 (DDR2-800)-25– 3.0ns @ CL = 5 (DDR2-667)-3•Self refresh–Standard None •Operating temperature–Commercial (0°C ื T C ื +85°C)None–Industrial (–40°C ื T C ื +95°C;–40°C ื T A ื +85°C)IT •Revision:A/:CNote: 1.Not all options listed can be combined todefine an offered product. Use the PartCatalog Search on forproduct offerings and availability.2Gb: x4, x8, x16 DDR2 SDRAMFeatures。

WSD90P06DN56 高密度穿孔P型MOSFET数据手册说明书

VDD = -30 V, RL = 30Ω ID =-1 A, VGEN = -10 V, Rg = 6
VDS=-30V,VGS=0V, f=1.0MHz
Min. Typ. Max. Unit
-60
---
---
V
--- 10.5 13.5 mΩ
--- 13.5 17.5
-1.0 -1.85 -2.5
Page 4
Rev 1: May.2019
WSD90P06DN56
P-Ch MOSFET
www.winsok.tw
Page 5
Rev 1: May.2019
Attention
1,AnyandallWinsokpowerproductsdescribedorcontainedhereindonothavespecificationsthatcanhandle applicationsthatrequireextremelyhighlevelsofreliability,suchaslifeͲsupportsystems,aircraft'scontrolsystems,or otherapplicationswhosefailurecanbereasonablyexpectedtoresultinseriousphysicaland/ormaterialdamage. ConsultwithyourWinsokpowerrepresentativenearestyoubeforeusinganyWinsokpowerproductsdescribedor containedhereininsuchapplications.
Typ. -----
Max. 23 1.3
Unit ℃/W ℃/W

海尔波特类水分离器说明书

Hypersep STH & SFH seriesHypersep — centrifugal water separatorBrief descriptionHypersep separators are very compact and easy to install and is offered with a full range of threaded and flanged air connections. It needs no external power source, and it works automaticallywithout any maintenance requirements. Hypersep separators even remove rust, oil and other impurities, significantly improving the performance of filters and other downstream equipments.All threaded models in aluminium feature unique Hiroshield surface protection treatment, applied both inside and out-side. Hiroshield ensures that Hypersep can withstand even the toughest indus-trial conditions. The result is reduced maintenance and downtime.Hypersep’s low pressure drops configu-ration keeps system energy costs at a minimum. High pressure separtators formax. operating pressure 40 bar(g).Performance overview:Air Flow m 3/h Port Size 543/8"1261/2"1803/4"3301"5401¼"7501½"1.2602"24002½"2.7603"STH STH001A STH003A STH013A STH001P STH003P STH013P STH019PVersions• Horizontal or vertical configuration • in stainless steel• for high or low air flowPED approval is offered as standard for all models. Other International pressure vessel approvals available on request.Air Flow m 3/h Port Size in out 1764DN80DN801800DN100DN802196DN100DN10022280DN125DN1253936DN150DN1254020DN150DN150SFH088SFH089SFH097SFH142SFH180SFH209SFHBULSTHSFH-00-ENProduct-Speciﬁ cationSTH & SFH HypersepYour local authorized Parker distributor© 2014 Parker Hannifi n Corporation. All rights reserved.EMEA Product Information CentreFree phone: 00 800 27 27 5374(from AT , BE, CH, CZ, DE, DK, EE, ES, FI, FR, IE, IL, IS, IT , LU, MT , NL, NO, PL, PT , RU, SE, SK, UK, ZA)US Product Information Centre Toll-free number: 1-800-27 27 537/hzdPerformances refer to air at FAD 20 ˚C/1 bar a , and at the following working conditions: air suction 25 ˚C / 60%RH, 7 bar(g) working pressure, 35 ˚C compressed air inlet temperature, 7kPa pressure drop. Separators supplied without condensatedrain (see condensate drain models for matching drain).STH 040-046。

WSD100N06GDN56 N-Channel MOSFET 商品说明书

VG=VD=0V , Force Current ISD = 1A , VGS=0V
ISD=20A, dlSD/dt=100A/µs
55
A
240
A
0.8 1.3
V
27
ns
33
nC
Note : 1.The data tested by surface mounted on a 1 inch2 FR-4 board with 2OZ copper. 2.The data tested by pulsed , pulse width ≦ 300us , duty cycle ≦ 2%
VGS = VDS, IDS = 250µA VGS = 10V, ID = 20A VGS = 4.5V, ID = 15A
1.2 1.8 2.5
V
3.0 3.6
mΩ
4.4 5.4 mΩ
Switching
Qg Qgs Qgd td (on)
tr td(off)
tf Rg
Total Gate Charge Gate-Sour Charge Gate-Drain Charge Turn-on Delay Time Turn-on Rise Time Turn-off Delay Time Turn-off Fall Time Gat resistance
2,Winsokpowerassumesnoresponsibilityforequipmentfailuresthatresultfromusingproductsatvaluesthatexceed, evenmomentarily,ratedvalues(suchasmaximumratings,operatingconditionranges,orotherparameters)listedin productsspecificationsofanyandallWinsokpowerproductsdescribedorcontainedherein.

维克托利克公司产品说明书

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.(By Others)Series 78USeries 786Series 78TSUPPLY1.0 PRODUCT DESCRIPTIONAvailable Sizes• ½ – 2”/DN15 – DN50Maximum Working Pressure • 400 psi/2758 kPa/27.6 bar Operating Temperature Range• –4°F to +230°F/–20°C to +110°CFunction• Provides simplified coil circuit installation that meets optimal hydronic system design requirements Application• Hot and cold water, including treated and untreated water systems • This KOIL-KIT ™ Coil Pack includes:• (1) Series 78T Ball Valve Union Combination – Sweat x Sweat • (1) Series 78U Union Port Fitting – Sweat x Male Union • (1) TA Series 786H Balancing Valve – Sweat x SweatNOTE• The Series 78T includes a PT port and a blow-down valve. The Series 78U includes a PT port and a manual air vent.2.0 CERTIFICATI N/LISTINGSProduct designed and manufactured under the Victaulic Quality Management System, as certified by LPCB in accordance with ISO-9001:2008.Series 78T/78U Manual Koil-Kit ™ Coil Pack with TA Series 786H Sweat Globe Style Valve08.63System No.Location Submitted ByDateSpec Section Paragraph ApprovedDateSeries 78T Ball Valve Union Combination Body: Dezincification resistant (DZR) brass alloy Union: DZR brass with EPDM O-ring Tailpiece: DZR brassStem: BrassStem O-Ring Seals: EPDMHandle: Steel with vinyl gripSeries 78U Union Port FittingBody: DZR brass alloyUnion: DZR brass with EPDM O-ringSeals: EPDM O-ringTailpiece: DZR brass alloyTA Series 786H Balancing ValveValve Body and Bonnet: AMETAL® DZR brass alloy Sealing (Body/Bonnet): EPDM O-ringValve Plug: AMETAL®Seat Seal: EPDM O-ringSpindle: AMETAL®Slip Washer: Polytetrafluoroethylene (PTFE) Spindle Seal: EPDM O-ringSpring: Stainless steelHand Wheel: Polyamide and TPEMeasuring Points: AMETAL®Measuring Point Seals: EPDMMeasuring Point Caps: Polyamide and TPENOTE• AMETAL® is the dezincification-resistant brass alloy of IMI TA.Series 78T Ball Valve Union CombinationNOTE• Optional tailpieces may be ordered for reductions and for changing end configurations from sweat to threaded or threaded to sweat. If needed, specify optional tailpiece when ordering.Series 78U Union Port FittingNOTE• Optional tailpieces may be ordered for reductions and for changing end configurations from sweat to threaded or threaded to sweat. If needed, specify optional tailpiece when ordering.4.3 OPTIONAL PARTSSeries 78T/78U Union Tailpieces (Optional)Female Tailpiece Sweat Tailpiece Male TailpieceHose End Drain Valve (Optional)A hose end drain valve is factory-installed on the Series 78T.4.5 OPTIONAL PARTSProbe Port (Optional)For Series 78T and Series 78UHandle Extension (Optional)For Series 78T4.7 OPTIONAL PARTSAir VentA manual air vent is factory-installed on the Series 78U. This product can also be mounted on the Series 78T or provided loose for other piping needs.C V /K V values for flow of water at +60°F/+16°C are shown in the table.Formulas for C V and K V valuesΔP = Q 2/C V 2 ΔP = Q 2/K V 2Q = C V × √ΔPQ = K V × √ΔPSeries 78T Ball Valve Union CombinationSeries 78U Union Port FittingFlow CoefficientC v K v Q (Flow)GPM m3/hr ΔP (Pressure Drop)psibarWhere:TA Series 786H Balancing Valve Valve Selection GuideNOTES• Balancing valves should be sized in accordance with the GPM/LPM flows (and not in relation to pipeline size). Sizing balancing valves based on the minimumor maximum flow rates is not recommended. Valves should be sized using the nominal flow rate only. The Minimum Flow is calculated from the minimum open setting of the valve and a minimum pressure drop 1 Ft. WG (= 3 kPa). The Nominal Flow is calculated from the maximum open setting of the valve and the minimum recommended pressure drop, 2 Ft. WG (= 6 kPa). The Maximum Flow is calculated from the maximum open setting of the valve and the maximum pressure drop, 20 Ft. WG (= 60 kPa). A computer program, TA-Select, is available for calculation of valve handwheel pre-set position and other applications.• For information regarding Allen Wrench sizes see the Material Specifications section on page 3.• Measuring Accuracy: The hand wheel zero position is calibrated and must not be changed. Valves have an accuracy of flow measurement of 2% to 3% whenused within their recommended flow range and installed in accordance with the figure below.• For the most accurate results, a Series 734 TA SCOPE or Series 73M CMI should be used. However, any differential pressure meter may be used.The illustration relates to the accuracy of differential pressure measurement and is not an installation requirement.2 D 10 D2 D 5 D 5.2 PERF RMANCETA Series 786H Balancing Valve Cv Values for Various Handle SettingsThe values below may be used when calculating and sizing a piping system.1C V = GPM at a ΔP of 1 psi/7 kPa) through the valve at any given setting.1 psi = 2.31 ft. of H 2O 2Full open valve.For liquids other than water, the flow values from the balancing wheel can be adjusted as follows:Divide the flow rate by the square root of the specific gravity.This applies to liquids having, on the whole, the same viscosity as water, i.e. most water/glycol mixtures and water/brine solutions at room temperature. At low temperatures, the viscosity increases and laminar flow may occur in certain valves. The risk increases with small valves, low settings and low differential pressures.A computer program (Hy-Select) is available for calculation of pre-setting values and other applications. When the flow setting is verified or changed to the final setting, the memory stop should be set. Contact Victaulic for further information. When Δp and the design flow rate are known, use the formula shown to calculate the C V value.A computer program, Hy-Select, is available from Victaulic for calculation of pre-setting values and other applications.5.4 PART CODES08.63 11841 Rev B Updated 04/2020 © 2020 Victaulic Company. All rights reserved.User Responsibility for Product Selection and SuitabilityEach user bears final responsibility for making a determination as to the suitability of Victaulic products for a particular end-use application, in accordance with industry standards and project specifications, and the applicable building codes and related regulations as well as Victaulic performance, maintenance, safety, and warninginstructions. Nothing in this or any other document, nor any verbal recommendation,advice, or opinion from any Victaulic employee, shall be deemed to alter, vary, supersede, or waive any provision of Victaulic Company's standard conditions of sale, installation guide, or this disclaimer.Intellectual Property RightsNo statement contained herein concerning a possible or suggested use of any material, product, service, or design is intended, or should be constructed, to grant any license under any patent or other intellectual property right of Victaulic or any of its subsidiaries or affiliates covering such use or design, or as a recommendation for the use of suchmaterial, product, service, or design in the infringement of any patent or other intellectual property right. The terms “Patented” or “Patent Pending” refer to design or utility patents or patent applications for articles and/or methods of use in the United States and/or other countries.NoteThis product shall be manufactured by Victaulic or to Victaulic specifications. Victaulic recommends all products to be installed in accordance with current IMI TA installation/assembly instructions. Victaulic and IMI TA reserve the right to change productspecifications, designs and standard equipment without notice and without incurring obligations.InstallationReference should always be made to the current IMI TA installation/assembly instructions for the product you are installing. For coupling and strainer installation, reference should always be made to the I-100 Victaulic Field Installation Handbook for the product you are installing. Handbooks are included with each shipment of Victaulic products for complete installation and assembly data, and are available in PDF format on our website at WarrantyRefer to the Warranty section of the current Price List or contact Victaulic for details.TrademarksVictaulic and all other Victaulic marks are the trademarks or registered trademarks of Victaulic Company, and/or its affiliated entities, in the U.S. and/or other countries.7.0 REFERENCE MATERIALS08.16: Victaulic Balancing Valves - TA Series 786H/787H/788/789 and Series 78KH I-KOIL-KIT: Victaulic KOIL-KIT™ Coil Pack Installation and Maintenance Instructions11。

汽车SFC对照表

功能測試 (Function Test) ETD006
6182-009P-0180 6101-00HD-0180 (6Q01-1001-0980) 6182-007P-0180 6182-007Q-0180
PACK 03
外觀檢查(正面) 外觀檢查(反面) (Front (Back Appearance Inspect) Appearance Inspect) FID001 FID001
功能測試 (Function Test) ETD006 CN2焊點檢查 (CN2 Soldering Joint Inspect) SID001 091F-3720-0180
外觀檢查(正面) (Front Appearance Inspect) FID001 LCD焊點檢查 (LCD Soldering Joint Inspect) SID001 6122-0001-0180 6123-0001-0180 6123-0002-0180
焊點檢查 (Soldering Joint Inspect) SID001 091F-2612-0181 611N-004A-Y180 611N-004B-Y180
振動測試 (Vibration Test)
Burn in測試 (Burn In Test) ETD003
電壓測試 (Voltage Test) ETD002
6Q90-1001-4480
永杭
ZC705YMDDzzzzz RULE_MV_HMI
PACK 01
MV-HMI,PL fix MV-HMI,ML fix MV-HMI,CEO fix SU-AC, PL fix
6Q90-1001-3980 6Q90-1001-4080 6Q90-1001-4580

BS655-Z22-DN电子开关说明书

DataOrdering data Product type description BS655-Z22-DN Article number (order number)153031627EAN (European Article Number)4030661533087Approval - StandardsCertificatesTÜVcULus CCC CNCAGeneral dataStandardsIEC 60947-5-1 EN 620Enclosure materialGrey cast iron, painted Material of the contacts, electrical SilverMaterial of the cover Grey cast iron, painted Gross weight6,075 g General data - Features Number of auxiliary contacts 2Number of safety contacts2BS655-Z22-DNMetal enclosureSwitching point settingProtection class IP66, IP67Central connection terminalWide range of alternative actuators Platform concept with different function unitsSymmetry thanks to toothed, centrally located shaftSafety appraisalStandards ISO 13849-1Mission Time20 Year(s)Safety appraisal - Safety outputsB10d Normally-closed contact (NC)2,000,000 OperationsMechanical dataMechanical life, minimum1,000,000 Operations Positionierschritte für den Betätiger10 °Mechanical data - Connection techniqueCable entry 2 x M25 x 1.5Cable section, minimum0.5 mm², flexible Cable section, maximum 2.5 mm², flexibleAmbient conditionsDegree of protection IP66 to IEC 60529 IP67 to IEC 60529Ambient temperature, minimum-40 °C Ambient temperature, maximum+70 °C Protection rating IAmbient conditions - Insulation valueRated impulse withstand voltage U imp 4 kV Degree of pollution to IEC/EN 60947-13Electrical dataThermal test current 6 A Utilisation category AC-15230 VAC Utilisation category AC-15 3 A Utilisation category DC-1324 VDC Utilisation category DC-13 3 AElectrical data - Communication protocolsField bus DuplineElectrical data - DuplineOperating voltage8.2 VDC Operating current0.1 mARated impulse withstand voltage U imp0.8 kVCable section, minimum 0.2 mm², rigid0.25 mm², flexibleCable section, maximum 2.5 mm², flexible 4 mm², rigidOrdering codeProduct type description:BS65(1)(2)(3)(4)(1)5Grey cast iron, painted6thermosetting resin(2)Z22Snap action 2 NO contact / 2 NC contactT22Slow action, 2 NO contacts / 2 NC contactsZ33Snap action, 3 NO contacts / 3 NC contactsT33Slow action, 3 NO contacts / 3 NC contacts(3)without without indicator lampG024Indicator lamp (only for Z/T22), red (24 VDC)G115Indicator lamp (only for Z/T22), red (115 VAC)G230Indicator lamp (only for Z/T22), red (230 VAC)(4)without Standard version (without Dupline® input module)DN With integrated Dupline® input modulePicturesProduct picture (catalogue individual photo)ID: khds-f22| 15,4 kB | .png | 74.083 x 49.389 mm - 210 x 140Pixel - 72 dpi| 157,5 kB | .jpg | 352.778 x 235.303 mm - 1000 x 667Pixel - 72 dpiDimensional drawing basic componentID: kbs65g01| 98,3 kB | .jpg | 352.778 x 209.55 mm - 1000 x 594Pixel - 72 dpi| 3,5 kB | .png | 74.083 x 44.097 mm - 210 x 125 Pixel- 72 dpiDimensional drawing basic componentID: kbs65g02| 71,6 kB | .jpg | 352.778 x 167.922 mm - 1000 x 476Pixel - 72 dpi| 5,5 kB | .jpg | 89.253 x 42.686 mm - 253 x 121 Pixel -72 dpi| 2,9 kB | .png | 74.083 x 35.278 mm - 210 x 100 Pixel- 72 dpiDimensional drawing basic componentID: kbs65g03| 11,9 kB | .jpg | 115.711 x 63.853 mm - 328 x 181Pixel - 72 dpi| 4,7 kB | .png | 74.083 x 40.922 mm - 210 x 116 Pixel- 72 dpi| 127,4 kB | .jpg | 352.778 x 195.439 mm - 1000 x 554Pixel - 72 dpiK.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 WuppertalThe details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.Generated on 03/05/2021 03:56:39。

Belimo DN B252 50型号钢球阀说明书

B252•ApplicationStainless Steel Ball and StemType overviewType DN B25250Technical dataFunctional dataValve size [mm]2" [50]Fluidchilled or hot water, up to 60% glycol Fluid Temp Range (water)0...250°F [-18...120°C]Body Pressure Rating 400 psi Close-off pressure ∆ps 200 psiFlow characteristic equal percentage Servicing maintenance-free Flow Pattern 2-way Leakage rate0% for A – AB Controllable flow range 75°Cv85Cv Flow RatingA-port: as stated in chart B-port: 70% of A – AB CvMaterials Valve body Nickel-plated brass body Spindle stainless steel Spindle seal EPDM (lubricated)SeatPTFE Characterized disc stainless steel Pipe connection NPT female ends O-ring EPDM (lubricated)Ballstainless steel Suitable actuators Non-Spring ARB(X)SpringAFRB(X)Safety notesWARNING: This product can expose you to lead which is known to the State of California to cause cancer and reproductive harm. For more information go to Product featuresThis valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils. Some other common applications include Unit Ventilators, VAV box re-heat coils and bypass loops. This valve is suitable for use in a hydronic system with variable flow.B252 Flow/Mounting detailsTwo-way valves should be installed with thedisc upstream.DimensionsType DNB25250ARB, ARXA B C D E F H110.2" [260] 4.9" [125]7.7" [196] 6.0" [152] 1.7" [44] 1.7" [44] 1.2" [30]ARB N4, ARX N4, NRB N4, NRX N4A B C D E F11.4" [289] 4.9" [125]9.8" [249]7.6" [194] 3.1" [80] 3.1" [80]ARQB, ARQXA B C D E F H1H29.9" [251] 4.9" [125]7.5" [191] 6.1" [155] 2.3" [58] 2.3" [58]0.8" [20]0.6" [15]B252AFRB, AFRXA B C D E F11.3" [286] 4.9" [125]10.6" [268]8.9" [225] 2.0" [51] 2.0" [51]AFRB N4, AFRX N4A B C D E F13.0" [330] 4.9" [125]10.3" [262]9.3" [235] 3.4" [86] 3.4" [86]AFRX24-MFTModulating, Spring Return, 24 V, Multi-Function Technology®Technical dataElectrical dataNominal voltageAC/DC 24 V Nominal voltage frequency 50/60 Hz Power consumption in operation 7.5 W Power consumption in rest position 3 WTransformer sizing 10 VA (class 2 power source)Electrical Connection18 GA appliance or plenum cables, 3 ft [1 m], 10 ft [3 m] or 16ft [5 m], with or without 1/2" conduit connectorOverload Protectionelectronic throughout 0...95° rotation Functional dataOperating range Y 2...10 VOperating range Y note 4...20 mA w/ ZG-R01 (500 Ω, 1/4 W resistor)Input Impedance100 kΩ for 2...10 V (0.1 mA), 500 Ω for 4...20 mA, 1500 Ω for PWM, On/Off and Floating point Operating range Y variable Start point 0.5...30 V End point 2.5...32 VOptions positioning signal variable (VDC, PWM, on/off, floating point)Position feedback U 2...10 V Position feedback U note Max. 0.5 mA Position feedback U variable VDC variable Direction of motion motor selectable with switchDirection of motion fail-safe reversible with cw/ccw mounting Manual override 5 mm hex crank (3/16" Allen), supplied Angle of rotation 90°Running Time (Motor)150 s / 90°Running time motor variable 70...220 s Running time fail-safe <20 s @ 20°C Angle of rotation adaptation off (default)Noise level, motor 45 dB(A)Noise level, fail-safe 62 dB(A)Position indicationMechanical Safety dataDegree of protection IEC/EN IP54Degree of protection NEMA/UL NEMA 2Enclosure UL Enclosure Type 2Agency ListingcULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2014/30/EU and2014/35/EU; Listed to UL 2043 - suitable for use in air plenums per Section 300.22(c) of the NEC and Section 602.2 of the IMC Quality Standard ISO 9001Ambient temperature-22...122°F [-30...50°C]AFRX24-MFTFootnotesSafety dataStorage temperature -40...176°F [-40...80°C]Ambient humidity Max. 95% RH, non-condensing Servicingmaintenance-freeMaterialsHousing material Galvanized steel and plastic housing†Rated Impulse Voltage 800V, Type of action 1.AA, Control Pollution Degree 3AccessoriesGatewaysDescriptionType Gateway MP to BACnet MS/TP UK24BAC Gateway MP to Modbus RTU UK24MOD Gateway MP to LonWorksUK24LON Electrical accessoriesDescriptionType Service Tool, with ZIP-USB function, for programmable andcommunicative Belimo actuators, VAV controller and HVAC performance devicesZTH USService toolsDescriptionTypeConnection cable 10 ft [3 m], A: RJ11 6/4 ZTH EU, B: 3-pin Weidmüller and supply connectionZK4-GEN Service Tool, with ZIP-USB function, for programmable and communicative Belimo actuators, VAV controller and HVAC performance devicesZTH USElectrical installationINSTALLATION NOTESActuators with appliance cables are numbered.Provide overload protection and disconnect as required.Actuators may also be powered by DC 24 V.Only connect common to negative (-) leg of control circuits.A 500 Ω resistor (ZG-R01) converts the 4...20 mA control signal to 2...10 V.Control signal may be pulsed from either the Hot (Source) or Common (Sink) 24 V line.For triac sink the Common connection from the actuator must be connected to the Hotconnection of the controller. Position feedback cannot be used with a triac sink controller; theactuator internal common reference is not compatible.IN4004 or IN4007 diode. (IN4007 supplied, Belimo part number 40155).Actuators may be controlled in parallel. Current draw and input impedance must be observed.Master-Slave wiring required for piggy-back applications. Feedback from Master to controlinput(s) of Slave(s).Meets cULus requirements without the need of an electrical ground connection.Warning! Live electrical components!During installation, testing, servicing and troubleshooting of this product, it may be necessary to work with live electrical components. Have a qualified licensed electrician or other individual who has been properly trained in handling live electrical components perform these tasks. Failure to follow all electrical safety precautions when exposed to live electrical components could result in death or serious injury.AFRX24-MFT Wiring diagramsOn/Off Floating PointVDC/mA Control PWM ControlOverride Control Master - Slave。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

Product description
EGENS Dengue IgM and/or IgG Rapid Test Cassette (Serum/Plasma)is a lateral flow chromatographic immunoassay for the simultaneous detection and differentiation of IgM and IgG anti-dengue in human serum (or plasma). The kit is a diagnostic device for qualitative detection .When a specimen is added to the test, IgG and IgM antibodies in the specimen sample react with gold particles labled with dengue envelope proteins. As this specimen/particle mixture migrates along the length of the test, the anti-dengue IgG and/or IgM antibody particle complex is captured by the relevant IgG and IgM test bands located in the test device window causing a pale to dark red band to form at the test region of the cassette window. The intensity of the bands will vary depending upon the amount of antibody present in the sample. The appearance of any color in test region should be considered as positive for IgG and/or IgM antibody.A red procedural control line should always develop in the test device window to indicate that the test has been performed properly.
一、All variants
Format Sensitivity
Cassette 1:512
二、Intended clinical use
EGENS Dengue IgM and/or IgG Rapid Test Cassette (Serum/Plasma) is a profession-performing immunoassay designed for the qualitative determination of anti-dengue IgG and/or IgM antibody in serum or plasma .
三、Operating instructions
1.Specimen collection and handling
For serum or plasma, collect blood into a container without anticoagulant. If the specimen cannot be tested on the day of collection, store the serum or plasma specimen in a refrigerator or freezer. Bring the specimens to room temperature before testing. 2.Test Procedure
Cassette
1. Open a foil wrapper containing a cassette, remove the test kit and place it horizontally on the desk.
2. Pipette 1 drop(5µl) of specimen into the same well and then drop 1 drop(about 50µl) of diluent into the same well.
3. Read results within 10 minutes. Do not read results after 20 minutes.
3.Interpretatlon of results
Negative: Only control pink band appears on test region of the cassette. This indicates that there is no anti-dengue IgM and IgG in the specimen.
Positive: Three pink bands(C,G,M) ,two pink bands(C,G) or(C,M) appear on test region of the cassette. This indicates that the specimen contains detectable amount of
anti-dengue IgG and IgM,only IgG, only IgM.
Invalid: If without colored band appears at control region, this is an indication of a possible error in performing the test. The test should be repeated using a new one.。