QR8.3-10 产品特殊特性明表
QR8.3-21产品过程特殊特性清单
武汉神龙：S/R/C/MS安全特性/S safety characteristicsR表示法规特性/R regulations characteristicsC表示关键特性/C critical characteristicsM表示主要特性/M key characteristics北京奔驰：DS/DZDS安全关联性文件（由于零部件或系统的故障或失灵而对其他道路交通使用者造成生命和肢体的直接威胁即为安全关联的）。
/DS Documentation of relevance to safety(Components or systems whose malfunction or failure may place the life and limb of other road traffic users in direct risk are safety-relevant.)DZ认证关联性文件（数据、验证、建造许可等应用于认证或本国注册文件或进行模型批准检验的零部件或系统都为是认证关联的）。
/DZ Documentation of relevance to certification(Components or systems whose data, verifications ,construction permits etc. are used in certificates or country-specific registration documents or which are checked on type approval are certification-relevant.)上海汽车： /表示影响产品的安全性或法律法规要求的综合性的产品特性或过程特性。
/express that affect product safety or laws and regulations requirements of the integrated product characteristics or process characteristics.表示影响产品配合/功能的产品或过程特性。
03285_产品特性分析报告
引言概述正文内容一、功能特性分析1.功能完备性分析和评估产品的功能是否满足用户需求通过对竞争产品的对比，评估产品功能的竞争力2.功能创新性探讨产品是否具有独特的功能创新点分析产品的功能创新对用户体验和市场竞争的影响3.功能可定制性评估产品是否具备可定制的功能分析产品的定制功能对市场定位和用户需求的影响4.功能易用性分析产品的功能是否简单易用，是否符合用户的操作习惯进一步探讨产品的易用性对用户粘性和市场认可的影响5.功能的可持续性分析产品功能的可持续性，是否能够适应用户需求的变化探讨产品的功能更新和升级对市场竞争力的影响二、性能特性分析1.效率性能评估产品的响应速度、处理能力等关键性能指标分析产品性能的优劣对用户体验和市场竞争的影响2.可扩展性能探讨产品是否具备可扩展性能，能够适应不同用户规模和需求的增长分析产品可扩展性对产品销售和企业发展的影响3.兼容性能分析产品在不同操作系统、设备或网络环境下的兼容性评估产品兼容性对用户体验和市场拓展的影响4.稳定性能评估产品在长时间运行或高负载情况下的稳定性能分析产品稳定性对用户满意度和市场信誉的影响5.能耗性能分析产品在使用过程中的能耗情况，评估产品能耗水平的合理性探讨产品的能耗性能对用户环保需求和市场竞争力的影响三、设计特性分析1.外观设计分析产品外观设计的美感和与目标用户的契合程度评估产品外观设计对用户购买决策的影响2.用户界面设计评估产品用户界面的友好度和用户体验分析产品用户界面设计对用户粘性和市场认可的影响3.交互设计分析产品交互设计的合理性和用户沟通效果探讨产品交互设计对用户体验和市场口碑的影响4.结构设计评估产品结构设计的稳定性和可靠性分析产品结构设计对用户使用安全和产品质量的影响5.创新设计探讨产品是否通过创新设计打破常规，提供用户新的体验分析产品创新设计对市场认可和竞争力的影响四、安全性分析1.运行安全性评估产品在运行过程中是否具备保护用户数据和信息的能力分析产品运行安全性对用户信任和市场竞争力的影响2.数据安全性探讨产品在存储和传输用户数据过程中的安全保障措施分析产品数据安全性对用户隐私保护需求和市场信誉的影响3.用户身份认证安全性分析产品用户身份认证的安全性，评估产品是否具备防止安全漏洞的能力评估产品用户身份认证安全性对用户使用体验和市场声誉的影响4.系统兼容性安全性分析产品在不同操作系统或网络环境下的兼容性安全性探讨产品兼容性安全性对市场扩展和用户满意度的影响5.可信度和可靠性安全性评估产品在设计和制造过程中的可信度和可靠性分析产品可信度和可靠性安全性对用户和市场的影响五、可靠性分析1.产品寿命评估产品的设计和制造是否能够满足长期使用的要求分析产品寿命对用户满意度和用户忠诚度的影响2.产品质量分析产品的质量标准和质量控制措施的有效性探讨产品质量对用户满意度和市场品牌形象的影响3.故障率评估产品在使用过程中的故障率和故障处理效果分析产品故障率对用户满意度和市场声誉的影响4.维护和支持分析产品维护和支持服务的质量和效率评估产品维护和支持服务对用户忠诚度和市场口碑的影响5.产品扩展性探讨产品是否具备可扩展性，能够与其他产品或系统无缝集成分析产品扩展性对用户方便性和市场竞争力的影响总结通过上述对产品特性的分析，可以看出产品在功能、性能、设计、安全性和可靠性等方面的优势和劣势。
TruStability标准精度硅陶瓷(SSC)系列压力传感器说明说明书
DESCRIPTIONThe TruStability ® Standard Accuracy Silicon Ceramic (SSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric analog output for reading pressure over the specified full scale pressure span and temperature range.The SSC Series is fully calibrated and temperaturecompensated for sensor offset, sensitivity, temperature effects, and non-linearity using an on-board Application SpecificIntegrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz.The SSC Series is calibrated over the temperature range of -20 C to 85 C [-4 F to 185 F]. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc.These sensors measure absolute, differential, and gage pressures. The absolute versions have an internal vacuum reference and an output value proportional to absolutepressure. Differential versions allow application of pressure to either side of the sensing diaphragm. Gage versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere.The TruStability ®pressure sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases. An available option extends the performance of these sensors to non-corrosive, non-ionic liquids.All products are designed and manufactured according to ISO 9001 standards.FEATURESIndustry-leading long-term stabilityExtremely tight accuracy of 0.25% FSS BFSL (Full ScaleSpan Best Fit Straight Line)Total error band of2% full scale span maximumModular and flexible design offers customers a variety of package styles and options, all with the same industry-leading performance specificationsMiniature 10 mm x 10 mm [0.39 in x 0.39 in] packageLow operating voltageExtremely low power consumptionRatiometric analog outputHigh resolution (min. 0.03 %FSS) Precision ASIC conditioning and temperature compensated over -20 C to 85 C [-4 F to 185F] temperature rangeRoHS compliantVirtually insensitive to mounting orientationInternal diagnostic functions increase system reliabilityAlso available with I 2C or SPI digital outputAbsolute, differential and gage typesPressure ranges from 1 psi to 150 psi (60 mbar to 10 bar)Custom calibration availableVarious pressure port options Liquid media option2 /sensingPOTENTIAL APPLICATIONS Medical:- Airflow monitors- Anesthesia machines - Blood analysis machines - Gas chromatography - Gas flow instrumentation - Kidney dialysis machines - Oxygen concentrators - Pneumatic controls - Respiratory machines - Sleep apnea equipment - VentilatorsIndustrial:- Barometry- Flow calibrators- Gas chromatography - Gas flow instrumentation - HVAC- Life sciences- Pneumatic controls1Honeywell Sensing and Control 3101. Absolute maximum ratings are the extreme limits the device will withstand without damage.2. Ratiometricity of the sensor (the ability of the device to scale to the supply voltage) is achieved within the specified operating voltage for eachoption.3. The sensor is not reverse polarity protected. Incorrect application of supply voltage or ground to the wrong pin may cause electrical failure.4. The compensated temperature range is the temperature range over which the sensor will produce an output proportional to pressure withinthe specified performance limits.5. The operating temperature range is the temperature range over which the sensor will produce an output proportional to pressure but may notremain within the specified performance limits.6. Accuracy: The maximum deviation in output from a Best Fit Straight Line (BFSL) fitted to the output measured over the pressure range at25 °C [77 °F]. Includes all errors due to pressure non-linearity, pressure hysteresis, and non-repeatability.7. Total Error Band: The maximum deviation from the ideal transfer function over the entire compensated temperature and pressure range.Includes all errors due to offset, full scale span, pressure non-linearity, pressure hysteresis, repeatability, thermal effect on offset, thermal effect on span, and thermal hysteresis.8. Full Scale Span (FSS) is the algebraic difference between the output signal measured at the maximum (Pmax.) and minimum (Pmin.) limits ofthe pressure range. (See Figure 1 for ranges.)9. Life may vary depending on specific application in which sensor is utilized. 10. Contact Honeywell Customer Service for detailed material information.CAUTIONPRODUCT DAMAGEEnsure liquid media is applied to Port 1 only; Port 2 is not compatible with liquids.Ensure liquid media contains no particulates. All TruStability ®sensors are dead-ended devices. Particulates can accumulate inside the sensor, causing damage or affecting sensor output.Recommend that the sensor be positioned with Port 1 facing downwards; any particulates in the system are less likely to enter and settle within the pressure sensor if it is in this position.Ensure liquid media does not create a residue when dried; build-up inside the sensor may affect sensor output. Rinsing of a dead-ended sensor is difficult and has limited effectiveness for removing residue.Ensure liquid media are compatible with wetted materials. Non-compatible liquid media will degrade sensor performance and may lead to sensor failure.Failure to comply with these instructions may result in product damage.4 /sensing11. The transfer function limits define the output of the sensor at a given pressure input. By specifying Pmin. and Pmax., the output at Pmin. andPmax., the complete transfer function of the sensor is defined. See Figure 2 for a graphical representation of the transfer function. Other transfer functions are available. Contact Honeywell Customer Service for more information.12. Digital outputs (SPI or I 2C) are also available. Contact Honeywell Customer Service for more information. 13. Custom pressure ranges are available. Contact Honeywell Customer Service for more information. 14. See Table 5 for an explanation of sensor pressure types. 15. See CAUTION on previous page.Honeywell Sensing and Control 5SSCSANN100PGAA3 SIP package, AN pressure port, no diagnostics, 100Output is proportional to the difference between the pressures applied to each port. (Port 1 Port 2)50% point of transfer function set at Port 1 = Port 2.Long-term Stability (1000 hr, 25 C [77 F]) 0.25% FSS 0.25% FSS 0.25% FSS 0.25% FSS 0.25% FSS 0.35% FSS 0.35% FSS 0.25% FSS 0.25% FSS 0.25% FSS 0.35% FSS 0.35% FSS 0.25% FSS 0.25% FSS 0.25% FSS 0.25% FSS 0.25% FSS6 /sensingLong-term Stability (1000 hr, 25 C [77 F]) 0.25% FSS 0.25% FSS 0.25% FSS 0.25% FSS 0.25% FSS 0.25% FSS 0.35% FSS 0.35% FSS 0.35% FSS 0.35% FSS 0.35% FSS 0.25% FSS 0.25% FSS 0.25% FSS 0.25% FSS 0.25% FSS 0.35% FSS 0.35% FSS 0.35% FSS0.35% FSS 0.35% FSS0.35% FSS 0.25% FSS 0.25% FSS 0.25% FSS 0.25% FSS 0.25% FSS 0.25% FSS16. Overpressure: The maximum pressure which may safely be applied to the product for it to remain in specification once pressure is returned tothe operating pressure range. Exposure to higher pressures may cause permanent damage to the product. Unless otherwise specified this applies to all available pressure ports at any temperature with the operating temperature range.17. Burst pressure: The maximum pressure that may be applied to any port of the product without causing escape of pressure media. Productshould not be expected to function after exposure to any pressure beyond the burst pressure.18. Common mode pressure: The maximum pressure that can be applied simultaneously to both ports of a differential pressure sensor withoutcausing changes in specified performance.Honeywell Sensing and Control78 /sensingHoneywell Sensing and Control910 /sensingHoneywell Sensing and Control 11Sensing and Control Honeywell1985 Douglas Drive NorthGolden Valley, MN 55422 008215-2-EN IL50 GLO Printed in USA March 2011© 2011 Honeywell International Inc.WARNINGWARRANTY/REMEDYHoneywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.WARNINGMISUSE OF DOCUMENTATIONThe information presented in this product sheet is forreference only. DO NOT USE this document as aproduct installation guide.Complete installation, operation, and maintenanceinformation is provided in the instructions supplied witheach product.Failure to comply with these instructions could result in death or serious injury.SALES AND SERVICEHoneywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or:E-mail:*********************Internet: /sensingPhone and Fax:Asia Pacific +65 6355-2828; +65 6445-3033 FaxEurope +44 (0) 1698 481481; +44 (0) 1698 481676 Fax Latin America +1-305-805-8188; +1-305-883-8257 FaxUSA/Canada +1-800-537-6945; +1-815-235-6847+1-815-235-6545 Fax。
设计矩阵表
颗粒
针孔
缩孔
性能
耐人工老化性
耐盐雾性
耐水性
耐酸雨性
耐温变性
耐汽油性
附着力
硬度
柔韧性
耐冲击性
抗石击性
抗划伤
可加工性
抗流挂性
贮存稳定性
过烘烤性
稀释稳定性
重涂性
环境
低VOC
低固体废弃物
合计
配方成份
AO-168-10
低于
0.5
重量百分比
1
1
0
0
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
24
高于
1.2
重量百分比
重量百分比
1
1
0
0
1
1
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
24
SZ-20固体份
低于
60
重量百分比
1
1
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
23
高于
75
重量百分比
1
1
0
0
1
1
1
1
1
1
1
1
1
常用螺纹识别表
CTG
CTG 16
厚钢电线管螺纹
JIS B0204
13
CTV
CTV8
自行车螺纹
JIS D9422
14
E
E27
爱迪生螺纹（电工螺纹）
IEC 399，EN 60399，
ASAC44 JISC7709，
DIN 40400，GB/T1005，
BS EN60399，TOTO6042
15
FG
FG14.3
自行车螺纹
ANSI B1.20.1
3
NPTF
1/8-27 NPTF-1
干密封圆锥管螺纹
ANSI B1.20.3
17
NPTR
1/2-14 NPTR
围栏管机械连接锥螺纹
ANSI B1.20.1
3
NR
12-24 NR-2
控制牙底圆弧半径的美国
国家螺纹（r=0.108～0.144P）
MIL-B-7838
33
常用螺纹识别表(摘至机械设计师手册)
14
TW
TW80
29°梯形螺纹
JIS B0222
43
UN
21/2-16UN-2A
ISO英制螺纹
ISO 263,725,5864
ANSI B1.1.BS1580.
14
UNC
1/4-20 UNC-2A
ISO英制粗牙螺纹
JIS B0206, 0210.
ISO 263,725,5864.
ANSI B1.1, BS1580.
11
LP
2APILP
管线管螺纹
API Std 5B
18
常用螺纹识别表(摘至机械设计师手册)
特征代号
大连第三仪表联合制造公司二分厂产品型号说明说明书
一 产品型号说明J D L310表示规格110710L 表示为直行程执行器R 表示为角行程执行器D 表示为电子式J 表示为经济式二 产品主要特点1执行器本身具有伺服功能无需另配伺服放大器2关键部件控制器采用先进的混合集成电路并用树脂浇铸固化经老化处理可靠性高防潮防震3 用电位器调整零点行程灵敏度方便易行 4用跳线器任意选择正反动作 5断电源或断信号阀门自锁三 型号与规格表一类别 型号 输出力N速度mm/s行程 JDL 310 4000 1.25 101625 JDL 410 6400 1.25 4060直行程JDL510 16000 1.58 60100类别型号 输出力矩NM 全行程时间S 最大转角度JDR 110 40 25 JDR 210 100 25 JDR 310 250 25 JDR 410 600 25 JDR 510 1600 25 JDR 610 4000 40角行程JDR710 60006090四主要技术参数输入标准信号DC420mA开度反馈信号DC420mA反应时间1秒基本误差 2.0%开度检测精密导电塑料电位器电源电压220V AC 50Hz使用环境温度10 +55使用相对湿度普通型95%以下防爆型4585%环境气体无腐蚀性气体允许振动 1.5G以下信号线与电源线隔离信号线应选用屏蔽控制电缆4芯S=0.75mm²外径91电源线选用电缆2芯S=1.0mm²外径91防护等级IP55防爆等级ExdIIBT4手动机构手柄或手轮五工作原理JDL JDR系列电子式电动执行器是以220V单相交流作为驱动电源接受来自计算机调节器或操作器的DC420mA输入信号来工作的全电子式电动执行机构电子控制单元采用集成电路制作被设计成匣子并用树脂浇铸固化称为控制器本身具有伺服功能控制器部分接受的输入信号DC420mA和来自开度检测部分的开度信号将两信号相比并放大向消除其差值的方向驱动和控制电机使减速输出轴朝着减少这一偏差信号的方向转动直到开度信号和输入信号相等为止此时输出轴就稳定在与输入信号相对应的位置上由于二相伺服电动机采用杠杆式制动机构能保证在断电是迅速的制动从而改善了系统的稳定性并能限制执行器的惯性惰走消除负载反馈的影响本伺服电动机又由于转子电阻较大因而其机械特性较软保证了本执行器因系统事故而卡住时电机不被烧毁阀位反馈两个端子如不接线时请用250500电阻短接调行程和调零操作如下表二表二跳线器上位时安装为反作用调节方式直行程执行器角行程执行器给定信号增大输出轴向上行输出轴逆时针转动顺时针调零输出轴向下行输出轴顺时针转动顺时针调行程输出轴向上行输出轴逆时针转动跳线器下位时安装为正作用调节方式直行程执行器角行程执行器给定信号增大输出轴向下行输出轴顺时针转动顺时针调零输出轴向上行输出轴逆时针转动顺时针调行程输出轴向下行输出轴顺时针转动顺时针调灵敏度正反作用均相同灵敏度降低六电动执行器故障及检查办法1不动作但控制电源和信号灯均亮检查• 电源电压是否正确• 电动机是否断线• 电动机电位器电容各接插头是否良好• 在上述检查都无问题情况下用对比互换法判断控制器是否良好2不动作电源灯亮信号灯不亮检查 • 输入信号是否正确• 输入信号+极性是否接反• 在上述检查都无问题情况下用对比互换法判断控制器是否良好3电动机发热一天内可能有几次停止动作检查• 配套阀门允许压差是否在额定范围内• 零位和行程调整是否正确• 灵敏度是否过高• 环境湿度是否过高4电动机发热迅速震荡爬行短时间内停止动作检查• 用数字方式万用表交流2伏电压档测控制器输入端是否有交流干扰• 信号线是否采用屏蔽线是否与电源线隔离• 电位器及电位器配线是否良好• 反馈组件动作是否正常5执行器动作呈步行爬行现象动作缓慢检查• 检查操作器来信号的动作时间是否正确6位置反馈信号太大或太小检查• 零位和行程调整是否正确• 更换控制器判断七安装和使用注意事项1执行机构应安装在环境温度为10+50相对湿度95%无腐蚀性气体的环境中安装位置应考虑到手动操作及维修安装的方便执行机构输出轴与调节机构阀门等的连接可通过连杆支架及专用的连接头安装时必须避免所有结合处的松动间隙止挡限位应在输出轴的有效转角或行程范围内紧固不可松动执行机构的外形及安装尺寸见图三图四表三表四2特别注意隔爆型执行器的安装及使用产品的选用安装必须严格按照中华人民共和国危险场所安全规程的规定内外接地牢固可靠维修时断开电源后盖连接电源的接线端子爬电距离及电气间隙应大于8mm定期检查密封圈的老化问题如已老化应及时更换更换零件须到生产厂购买不得借用其它元件产品外壳保持清洁其最高表面温度不得超过1303为避免电源线的干扰信号线请采用屏蔽电缆线并与电源线隔离4安装场所若受辐射热直射日光的影响超出允许范围时请用适当遮蔽板或隔热材料进行保护5安装及运输时切勿承受猛烈冲动震动避免跌落等现象6安装前请不要拆卸配线入口塞子和护罩保管时避免灰尘及高温潮湿气体等场所7室外安装请不要在雨天配线作业8电源配线要有足够的容量以满足执行器额定电流及起动电流的要求9请安装地线连接电源及信号线时请先切断电源以防触电10安装时请留足执行器调整及检修时拆卸护罩所需要的空间并兼顾出口的方向11根据调节系统要求对执行机构进行整定然后可接入调节系统再投入运行前在投入运行前应检查现场的电源电压是否与规定相符按规定的电气安装接线图检查所有接线是否正确各接线端子是否牢靠12输出轴力或力矩应和终端调节机构阀门等所需力或力矩相适应以防止过载13电动执行器各组成部分应根据现场使用条件定期检查和高速减速器应定期清洗加油八外型尺寸图表JDL型系列直行程电子式电动执行器外形见图三外形尺寸见表三执行机构外形尺寸图三JDR型系列角行程电子式电动执行器外形及尺寸见图四,表四图四九手动机构执行机构后端盖上装有手柄如将手柄拨到手动位置可是制动盘和制动轮脱开可实现执行机构就地手动操作如将手柄拨到电动位置可保证执行器在自动运行时可靠的启动与停止执行机构就地手动操作只能在断电时进行不允许在伺服电动机通电的情况下进行手动操作执行机构就地手动操作时将电机上的手把拨在手动位置拉出手轮摇动即可操作完毕后先将电机上的手把拨到自动位置再把手轮推进如配有操作器可将操作器打在手动档在操作器上直接手动操作十定货须知及其它1订货须知请参照产品型号说明的内容填写产品名称型号规格以及输入信号注明是否配电子式电动操作器2其它电动执行器应放在干燥通风无腐蚀性气体的地方而且环境温度和相对温度应符合技术要求自发货时起十八个月内仪表如有损坏若属于厂方制造质量问题则由厂方负责免费保修若属于用户保管使用不当而造成的则由用户负责企业宗旨质量第一.信誉第一.服务第一 .新雪仪表 . 控制世界电话0411---3325668传真0411---3325168E-mail:****************。
有机物挥发SQR T1-8.3-2012
7 试验过程
7.1 设备校正 装上新的毛细管分离柱以及设备的每次变动之后，必须校正气相色谱仪，测定校正因子 k(G)。
7.1.1 基本校正 室温下制备 7 种校正溶液。校正溶液为丙酮溶解在正丁醇中，浓度分别为 0.1g/L、、0.5g/L，1g/L，
5g/L，10g/L，25g/L 和 50g/L。因丙酮是易挥发物质，应采用以下步骤制备校正溶液： a）用移液管将 30mL 正丁醇加入 100mL 干净的容量瓶中。 b） 将该容量瓶放在电子天平上。 c） 将天平调零，用微量进样器在容量瓶中滴入几滴丙酮，直至滴入的丙酮重量约为 0.01g，记录数
——加热炉：120℃ ——定量管：150℃ ——转移管：180℃ 3.3 气相色谱仪的测试条件 1）毛细管分离柱的升温程序： ——50℃时保温3分钟 ——以12℃/min的速度从50℃升温到200℃ ——200℃时保温4分钟 ——后运行温度50℃ 2）进样口温度：200℃ 3）检测器温度：250℃ 4）分流比：约1：20
从冰箱中取出 7 种不同校正溶液的小玻璃瓶各 1 瓶（1.5mL），放在桌上，直到校正溶液的温度与 实验室温度相当。
将微量取样器（10μL）的针头通过密封片插入装有最低浓度校正溶液（0.1g/L）的小玻璃瓶中， 用待测溶液将微量进样器清洗 10 次。清洗后将针头插入小瓶中，多次地轻轻地上下抽动活塞，直至吸 入的溶液中不再有气泡，小心地拔出针头。慢慢地小心地从下向上推动活塞，直至活塞中的溶液体积为 4μL±0.04μL（如果所用的顶空瓶体积为 20mL）。用一张干净的滤纸擦净针头表面，将校正溶液快速 射入一个空顶空瓶中，迅速用瓶盖和封盖器密封，检查密封性并作标记。用同样的步骤在其他顶空瓶中 加入校正溶液然后密封。
产品和过程的特殊特性清单
产品和过程特殊特性清单
Project Name项目名称:
No.编号:QR/TD-11B/1
Characteristics Class
特性等级
Characteristics Catogery
特性分类
Characteristics Name
★
Main Characteristics
重要
特性
Process Characteristics过程特性
General Characteristics
一般特性
Product Characteristics产品特性
Notes:“★”represents key characteristics (means significant size) and“●”represents important characteristics (means significant process).
注：“★”为关键特性(是指重要尺寸)；“●”为重要特性（是指重要过程）
APQP group member signature(including customer representatives)
APQP小组成员签名(需含顾客代表)
Worked out by/Date编制/日期：Approved by /Date审批/日期：
特性名称
Characteristics Value/Requirements
特性值/要求
Characteristics Symbol
特性符号
Notes
备注
Special Characteristics