%% [ ProductName ESP Ghostscript]%%
方正飞腾4.X排版软件使用问题及解决方案
方正飞腾4.X排版软件使用问题及解决方案方正飞腾4.X排版软件使用问题解决方案常用问题22问1．飞腾3.14版在Win2000运行，但是文件存盘后，打开就出错，报告非预期的文件格式。
何故?答：由于飞腾3.14版不支持在Win2000下运行，目前飞腾最新版本是4.1，它可以很好地支持windows2000／XP，而飞腾3.14版本最多只能在windows98下运行。
2．要做黑白报纸，但图片是彩色的，应该用哪种方法处理?答：(1)在photoshop中将图片转为灰度。
(2)用文件菜单中的“转为黑白版”命令。
(3)不转换，在PSP中输出色面中选输出gray。
最好在photoshop将图片转为灰度，这种方法最为稳妥。
而且，图片的模式转换还是交给图像处理软件来处理。
同理，什么样的格式最好由支持这种格式的软件来处理。
3. 飞腾能排化学分子链吗?怎样使用?如果不能，如何实现?答：飞腾目前不能排化学分子链，老的维思系统可以，您可以使用其它软件如：VISI O等，然后以图形的形式排入飞腾软件，也可以用书版排好，转换成EPS文件后，插进飞腾中去。
4．有一本书是用word排的，里面有照片和word下排的底纹。
能不能用飞腾打开?如果能打开，会不会有什么变化?要注意哪些问题?答：飞腾可以排入简单的word文件，可以保持原始文字，但是格式会有变化，而且建议使用word97格式的文档。
5. 为什么在飞腾里的行距要么用不了，要么就很大?答：这是因为在飞腾中使用了对位排版，只要：降对位排版的选项取消即可调整行距。
6．飞腾4.1没有帮助文件，这是不是就不是正版的?答：飞腾4.1正式版程序中没有帮助文件，请使用正版配的飞腾使用说明书。
7．word文本粘贴到FIT中后，其中文引号变成西号引号的问题。
答：这是word的问题，与飞腾无关，这样的doc文件中的双引号不是汉字内码而是0 x1093和0x1094。
这样的doc文件必须用word重新打开，转存为word97兼容的方式(取消97不支持的功能)，就可以正常了。
Wine使用教程
>;= 16MB 的 RAM。在此之下所有东西都是不可用的。“良好”的执行需要 >;= 64 MB。
一个 X11 window 系统(XFree86 等)。Wine 为其他图形显示驱动器做了准 备，但写支持不是很容易的。文本控制台显示驱动器基本上希望你已经设法完全满足了上述要求。现在我们告诉你 Wine 能做/支持的:
Wine 可以用两种不同的方式运行应用程序: 作为预编译的 Windows 二进制程 序，或作为本地编译的 X11 (X Window 系统) 应用程序。前面的方法使用模 拟把一个 Windows 应用程序和连接到 Wine 库上。通过 Wine 安装或简单的 把 Windows 可执行文件复制到你的 Linux 系统上，你可以用模拟器直接运行 你的 Windows 应用程序。
最后，你可能有一天需要知道如何向你的 Wine 版本提供补丁。可能你找到了 Wine 中的一个未发现的缺陷，请向 Wine 邮件列表报告，并从某个开发者接 受一个补丁来修理这个缺陷。本章的最后一段将告诉你如何安全的提供补丁以 及如果补丁不工作如何复原。[/color]
2.2. 为 Debian 系统获得 Wine 在 Debian 系统的多数情况下，你可以用一个简单的命令安装 Wine，作为 root:
1.1.2. 模拟与本地连接 Wine 是 win32 库的一个 UNIX 实现，由上百个志愿开发者从头(from scratch)写成并在一个开放源代码许可之下发行。任何人都可以下载并阅读源 代码，并修理存在的缺陷。Wine 社区众多有才干的程序员在增进 Wine 上花
安装AdobeAcrobat70Professional出现警告20225
安装AdobeAcrobat70Professional出现警告20225
关于无法安装“pdffactroy”和“AdobeAcrobat”虚拟打印机的解决方法。
安装AdobeAcrobat7.0Profeional出现了下面的问题：“警告20225。
AdobeAcrobat7.0安装程序无法创建新的key目：AdobePDFConverter。
AdobePDFPrinter可能不可用。
GetLatError:找不到指定的模块”。
警告20225。
AdobeAcrobat7.0安装程序无法创建新的key目：AdobePDFConverter。
AdobePDFPrinter可能不可用。
GetLatError:系统找不到指定的文件”。
某些ghot版本的某P在安装pdffactroy和AdobeAcrobat时，会提示因为缺少某个模块而无法安装虚拟打印机，其原因不是因为printpooler服务没启动，也不是因为环境变量patch被其它软件更改。
真正的原因是：某P原有的“系统还原”功能被精简掉了！！！
重装系统还原功能的方法是：找到\WINDOWS\inf\r.inf，右键选择“安装”，按照系统提示进行安装，最后重启系统。
当系统还原功能成功安装之后，再安装pdffactroy和AdobeAcrobat 虚拟打印机就能成功了。
该方法在“GhotWindow某PProfeionalSP220061111NTFS”版本上测试成功。
ATTO ConfigTool v4.14简介：Linux版产品说明书
Product Release NotesThe ATTO Configuration Tool helps you customize the settings of your ATTO storage controller to maximize the performance of your storage connection. While the factory settings on your host adapter should provide excellent performance for a wide range of applications, some specialized applications may benefit from modification of the adapter settings to tune the adapter for a specific performance range.These product release notes define the new features, changes, known issues and release details that apply to the ATTO Configuration Tool v4.14 that was released on May 2, 2014. This information pertains to Red Hat Enterprise Linux versions 4, 5, 6; SUSE Linux Enterprise Server versions 10 and 11; Cent OS versions 5, 6; Ubuntu 12.x and 13.x.2. Changes∙Version 4.14 (Released 5/2/14)o The following apply to changes made from v4.13 to v4.14. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Added support for new ATTO products: NT2012, NS2162 and Thunderlink FC 2162.▪Modified application behavior so that the Multipath Director node is created when amultipathing driver is discovered.▪CLI tools are now packaged in the diagnostics package.▪An error message when saving a (multipath) path is no longer clobbered bysuccessfully saving the next path.▪Corrected an issue where the diagnostic scripts would hang in Fedora 20 by notcollecting /proc/net.▪Service now displays “replaced” and “failed” device status for firmware that reports it.▪Added a warning for users to backup RAID groups before converting.▪Added a notification for scheduled or canceled shutdowns is given on platforms that do not do this natively.▪Added menu items to rescan multipathing targets and controllers.▪Added the ability to remember login passwords.∙Version 4.13 (Released 1/16/14)o The following apply to changes made from v4.12 to v4.13. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Support for PowerCenter Pro has been added▪Support for GT and 12Gb HBAs has been added to the diagnostic scripts▪The packaged CLI tools have been updated to the latest available version▪RAID group names are handled in a case sensitive manner▪Resolved an issue where the ATTO ConfigTool Daemon crashes unexpectedly.▪Resolved an issue where ConfigTool Drive Metrics keep going even if an enclosure is unplugged.▪Fixed a problem where SNMP MIB information is incorrect for “raidMemberTable”∙Version 4.12 (Released 10/28/13)o The following apply to changes made from v4.11 to v4.12. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Added a checkbox on the RAID group Properties panel that indicates the RAID group is bootable.▪The diagnostics package has been updated to collect system-wide information▪Resolved an installer issue in Ubuntu 12.x▪Resolved an issue with link speed and topology are being marked “unknown” when connected to a 16Gb FibreConnect switch▪Fixed issue where help text hyperlinks were not working▪Fixed issue where help text does not open browser when clicking on website link∙Version 4.11 (Released 06/27/13)o The following apply to changes made from v4.10 to v4.11. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Added a checkbox on the RAID group Properties panel that indicates the RAID group is bootable.▪User session changes are now properly detected.▪Right-click support on the system tray icon is enabled for Gnome 3 desktops.▪Resolved a hardware buzzer issue.▪Resolved an OS name display issue.▪The system log opens properly so that messages appear in the system log.∙Version 4.10 (Released 03/12/13)o The following apply to changes made from v4.09 to v4.10. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Added support for dual domain devices.▪Added support for SSD RAID groups.▪Added support for maintaining health profile data for drive that use special characters in their serial number or other vital information.▪Added support to collect RAID firmware crash data.▪The SES slot number on the adapter drive table is displayed instead of SAS address.▪The name and type of device are properly indicated in the tree with multipathing.▪Devices are properly removed from the tree upon a cable pull.▪The S.M.A.R.T. data dialog no longer refuses to open with a message about the file being missing if the drive uses all 16 bytes of PRODUCT or all bytes of VENDOR area.▪The drive properties page has been rearranged so that all port addresses can bedisplayed.▪SAS or SATA is now indicated on the RAID drive properties page.▪An additional SNMP table is now provided to relay dual domain information.▪S.M.A.R.T. attributes are no longer validated, since some drives report values that are out of range which may cause the S.M.A.R.T. data dialog box from being displayed.▪The installer log is now located in “/var/attotech/log” instead of the installation directory.Additionally, the installer now installs a system menu item for the application.▪Resolved an issue where the ConfigTool daemon hangs on shutdown.▪Debugging messages from the auto discovery responder service are no longersubmitted to the system log.▪Resolved an issue where the notification applet blinks when muted if the hardware buzzer is disabled.▪Resolved an issue where RAID firmware sends an un-terminated log message, causinga system crash.▪Any number of hotspares can now be created using the hotspare wizard. Also, the block size of the disks are now validated during member replacement and localhotspare creation.∙Version 4.09 (Released 11/29/12)o The following apply to changes made from v4.08 to v4.09. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Celerity 16Gb support to the Windows and Linux diagnostic scripts.▪Devices can be added/removed in a rapid fashion without consequence.▪The adapter buzzer now sounds for non-Thunderbolt adapters when clicking the notification test button.∙Version 4.08 (Released 11/08/12)o The following apply to changes made from v4.07 to v4.08. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Added process power management events from the ESASRAID driver.▪Activated the on-board buzzer on the adapter that triggered a buzzer event only.▪Added detect mute button events from ThunderStream products.▪Resolved a timing related crash on shutdown if SNMP is enabled.▪Resolved a crash when committing the Notifications Plane contents with an email password.▪Resolved conflict with StorNext.∙Version 4.07 (Released 09/28/12)o The following apply to changes made from v4.05 to v4.07. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Removed the discovery mode option in the NVRAM panel for a 16Gb Celerity FC adapter.∙Version 4.05 (Released 08/13/12)o The following apply to changes made from v4.03 to v4.05. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Added support for OEM branding.▪Added support for time-stamped log messages from a RAID device.∙Version 4.03 (Released 04/23/12)o The following apply to changes made from v4.02 to v4.03. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪The name service switch component of the auto discovery mechanism will not break StorNext installations on the Linux platform.▪The installer will now install the correct system service architecture on Mandriva Linux platforms.▪The installer now makes the application available to all users.▪Several freezes in the system service have been resolved.▪On the Linux platform, resolved device events that seemed to “stop” after a period of time.▪Several crashes related to the auto discovery system were resolved.∙Version 4.02 (Released 02/14/12)o The following apply to changes made from v4.01 to v4.02. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪SNMP support has been added.▪Help menu now features a ‘Run Diagnostics’ option for troubleshooting purposes, which displaces the former option to save logs under the Notifications panel. RAIDlogging has also been improved.▪Support for FastFrame CT and NT adapter series has been added.▪Gen 3 PCIe transfer rate support has been added.▪Hot spares can now be assignable to RAID groups via CLI.▪Support for sounding the buzzer on buzzer-equipped hardware, controllable by the Notification Application.▪Performance, stability and logging improvements.∙Version 4.01 (Released 09/06/11)o The following apply to changes made from v4.0 to v4.01. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪The integrated help text features new icons for the buttons the user can click as well as manipulate in the table of contents.▪This release offers improved support and functionality with 3Gb RAID adapters.▪Rare instances of system hangs have been resolved.∙Version 4.0 (Released 08/17/11)o The following apply to changes made from v3.38 to v4.0. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Support for ExpressSAS H6F0GT.▪This release represents a major update to the GUI interface and capabilities. Whereas previous versions contained a single application, this release provides a GUIapplication and system service. Refer to the product manual for more information onthe setup and operation of these components.▪This release offers the ability to set-up, manage and optimize storage connected locally and remotely to ATTO storage controllers. This includes the ability to remotely accessand update NVRAM settings, updating system firmware and drivers, as well asretrieving system event logs.▪Only one instance of the ConfigTool can be installed on a host at any one time (i.e.either v3.38 or v4.0, but not both).▪This version does not have SNMP enabled. Use an earlier version of the ATTOConfigTool if you require SNMP.3. Known Issues/Advisements∙The Notifications tab can be viewed and changed without logging into a host.∙The audible and visual notifications only work with the system service on the local machine (not remotely).∙Drives may not disappear in the ConfigTool if a cable is pulled with no IO.∙The ConfigTool client doesn’t detect when it has been disconnected from a daemon.∙Manually entered IP addresses or hostnames are not saved.∙The maximum transfer size control is no longer available in 4.xx.∙The ConfigTool installer may flag the installation with an error but no error occurred.∙No warning message is displayed after resuming from “sleep” or “hibernate” to inform a user about the time required for the 3808 to boot.∙User must terminate the ConfigTool to disconnect from a remotely connected host.∙Cannot drag-and-drop drives in the ConfigTool GUI on OpenSuse 12.3.∙The ConfigTool installer does not add the firewall exception(s) on OpenSuse 12.3.∙The ConfigTool will not install on the latest version of Slackware∙The ConfigTool shows an incorrect date for the flash version∙The ConfigTool many hang when running the diagnostics package when an R680 is in a bad state ∙The ConfigTool hangs at “Connecting” message box when MPD ha s missing LUNs4. Affected ProductsATTO ConfigTool for the following ATTO products:CelerityFCExpressSAS H6xxExpressSAS H12xxExpressSAS R6xxThunderStream SC 3808D/EThunderlink FCThunderlink NSThunderlink NT5. Contacting ATTO SupportATTO Technology, Inc. is renowned for its technical support services. ATTO’s goal is to provide you the quickest response possible for your technical support needs, and is available Monday-Friday, 8:00 AM to 6:00 PM EST (except holidays).ATTO Technical Support can be contacted via phone or email:∙Phone: 716.691.1999 ext. 242∙E-Mail: ************************。
富士施乐 ApeosPort DocuCentre 产品系列 打印驱动程序 安装说明书 (Wind
ApeosPort/ DocuCentre 产品系列打印驱动程序安装说明书 (Windows® OS)标准打印机设置和自定义打印机设置是安装打印驱动程序的两种方法。
下面描述了在机器像计算机一样使用 TCP/IP 连接到子网的情况下，如何使用标准打印机设置安装打印驱动程序。
设置流程图:1.[机器] 检查机器的型号名称2.[机器] 检查机器的 IP 地址3.[PC] 下载打印驱动程序4.[PC] 安装打印驱动程序5.[PC] 从计算机发送打印作业注意：您需要使用您的计算机和机器操作。
[PC] 表示计算机操作，[机器] 表示机器操作。
[机器] 检查机器的型号名1.机器的型号名称显示在控制面板的前面。
[机器] 检查机器的 IP 地址1.按<机器确认（计数器确认）>按钮。
2.在 [机器状态/报告输出]屏幕上检查机器的 IP 地址。
重要说明：如果指定了 IPv6 地址，则不会显示 IPv4 地址。
在系统管理员模式，选择 [规格设定] > [网络设定] > [协议设置] > [TCP/IP - 网络设置]，然后选择[确认/变更]。
请参阅 [IPv4 - IP 地址]。
3.选择[关闭]。
[PC] 下载打印驱动程序您可以通过以下两种方法中的任何一种方法获取打印驱动程序。
•从随机器一起提供的软件/ 产品手册中安装•从我们的官方网站下载。
()[PC] 安装打印驱动程序标准打印机设置和自定义打印机设置是安装打印驱动程序的两种方法。
下面描述了在机器像计算机一样使用 TCP/IP 连接到子网的情况下，如何使用标准打印机设置安装下载的PCL 打印驱动程序。
1.双击下载的 PCL 打印驱动程序。
2.确认软件许可协议，并单击[是]。
3.单击[开始安装]。
注意：如果出现如下‘User Account Control’对话框，选择[Yes]。
4.选择[自定义]，并单击[下一步]。
5.选择[本地打印机]，并单击[下一步]。
OfficeScan常见问题解决方案
OfficeScan常见问题解决方案解决方案65945officescan 8.0在WEB登入控制台问题描述: 在IE里面出现http://{officescan server ip}/officescan/console/cgi/cgiwebupdate.exe解决方案: 1，停止以下的服务OfficeScan Master ServiceIIS Admin Service2、打开Program Files\Trend Micro\OfficeScan\PCCSRV\Web_OSCE\Web_console\HTML\ClientInstall文件夹检查以下的文件是否为0字节，如果是0字节，请从其他运行正常的officescan服务器端上获取NTsetup0.htmNTsetup1.htmNTsetup2.htmNTsetup3.htmNTsetup4.htmNTsetup4e.htm3、打开\Program Files\Trend Micro\OfficeScan\PCCSRV\Admin文件夹，检查tsc.ptn文件是否存在，如不存在，从运行正常的officescan上拷一个过来4、开启步骤一中停止的两个服务5、进入C盘\Windows 文件夹，右击temp文件夹，属性，把IUSR_帐号加入，并且给与读写权限6、再次进行安装解决方案65549Officescan 8.0 通过Web方式安装客户端出现空白页面。
问题描述: Officescan 8.0 通过Web方式安装客户端出现空白页面。
解决方案: 请尝试在Officescan服务器进行下面的操作:1. 点击运行，输入cmd然后回车。
2. 输入以下命令netsh winsock reset解决方案65890officescan master service无法自动启动问题描述: officescan master service无法自动启动，可以手动启动。
Oracle EBS 报表打印设置基本原理
- --信息技术最正确实践ORACLE核心应用技术E-B USINESS S UITE报表打印设置根本原理Author: 黄建华Creation Date: November 1, 2005Last Updated: 3/23/2022 5:13:00 AMDocument Ref: <Document Reference Number>Version: DRAFT 1AApprovals:<Approver 1><Approver 2>Copy Number _____Document ControlChange RecordReviewersDistributionNote To Holders:If you receive an electronic copy of this document and print it out, please write your name onthe equivalent of the cover page, for document control purposes.If you receive a hard copy of this document, please write your name on the front cover, fordocument control purposes.ContentsDocument Control (iii)1.Basic 61.1.Oracle Reports简要执行过程61.2.度量单位Scale (6)1.3.纸大小Page Size (7)1.4.打印机与操作系统打印命令71.5.Oracle Reports命令行81.6.X-Windows (9)1.7.CM和Oracle Reports的关系121.8.CM和实际打印122.Oracle Reports类型132.1.Bitmap & Character Mode 2059041.6 (13)2.2.Text 142.3.XML 152.4.HTML (15)2.5.PDF 152.6.PCL 152.7.Postscript (16)2.8.XML Publisher (17)2.9.其它183.Oracle Reports配置根底193.1.对X Display Server的根本要求193.2.EBS中关于DISPLAY的设置193.3.Reports与字体 1062590.6/1015280.6 (20)3.4.Reports相关设置254.System Administrator中关于打印机的设置294.1.Printer (29)4.2.Printer Type (29)4.3.Print Style (29)4.4.Printer Driver (30)4.5.SRW Driver〔SQL*ReportWriter〕文件304.6.关于行、列315.PASTA 325.1.IX Library与报表输出〔非打印〕325.2.PASTA概述325.3.PASTA格式转换335.4.PASTA配置文件345.5.PASTA打印机设置345.6.PASTA其他功能346.配置实例356.1.自定义纸356.2.图形化报表〔Postscript〕打印设置386.3.图形化报表〔XML Publisher〕打印设置397.Open and Closed Issues for this Deliverable (42)Open Issues (42)Closed Issues (42)1.BasicOracle本身的集成性很强、又是跨平台的，这是它的优点。
ATTO ConfigTool v4.17 – Windows Product Release No
Product Release NotesThe ATTO Configuration Tool helps you customize the settings of your ATTO storage Controller to maximize the performance of your storage connection. While the factory settings on your host adapter should provide excellent performance for a wide range of applications, some specialized applications may benefit from modification of the adapter settings to tune the adapter for a specific performance range.These product release notes define the new features, changes, known issues and release details that apply to the ATTO Configuration Tool v4.17 that was released on October 8, 2014. This information pertains to the Microsoft® Windows OS including Windows 7, 8, 8.1, Server 2008, Server 2008 R2 and Server 2012.2. Changes∙Version 4.17 (Released 10/8/14)o The following apply to changes made from v4.16 to v4.17. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Modified the “Find Host” dialog to automatically remember entered hosts and offer an auto-completion mechanism. Also, a new “Delete Hosts” dialog is available from the“Network” menu, and saved host s are automatically discovered upon launch.▪Added the ‘MaxXferSize’control to the “Advanced” tab panel.▪Modified behavior so that non-ASCII Win32 errors are now displayed according to the active language pack.▪An error message is now displayed if the email configuration settings are invalid.▪ A caret is now displayed in the RAID CLI tab.▪Support for the ESAS H1244/1248/1288 HBAs has been added▪The temperature is now logged for all RAID and 12Gb HBAs on driver load andfirmware restart▪Old drivers are now supported when using RAID 50/60 enabled firmware▪The LLI Moderation NVRAM setting is now properly interpreted▪The ‘atmpinfo’ CLI tool in the diagnostics package has been updated ∙Version 4.16 (Released 8/5/14)o The following apply to changes made from v4.15 to v4.16. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Added support for RAID 50 and RAID 60▪Added support for the ThunderLink FC 2082▪Split the RAID MIB into 4 separate MIBs, with updated RAID 50/60 support▪GUI will now scroll the RAID tab’s Drive Table to the selected drives when groups ormembers are selected▪Now append the hostn ame to the notification email’s subject line▪Collect atsastop and atsasphy diagnostics for the RAID adapters▪Log adapter name and PCI info when an adapter driver is loaded▪Preserve the existing options when changing the multipathing load balancing policy▪Overwrite all email recipient fields when restoring the notification configuration▪Improved messaging when an error occurs updating the flash▪Make the multipath target name in the tree consistent with atmpinfo▪Start a group rebuild prior to prompting to replace members▪Add a drive counter to the drive drop table in the various RAID wizards▪ A bad hostname to service principal name conversion no longer blocks access to the host via username/password login∙Version 4.15 (Released 5/22/14)o The following apply to changes made from v4.14 to v4.15. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Added support for logging VSA events.▪We now explicitly check for the ‘attobus’ service to ensure that multipathing anddiagnostic information are collected with MPDirector v1.40, and later.∙Version 4.14 (Released 5/2/14)o The following apply to changes made from v4.13 to v4.14. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Added single sign-on support between Windows client and service.▪Added the ability to limit access to only Windows Administrators that are in the“ConfigTool Users” group.▪Added support for new ATTO products: NT2012, NS2162 and Thunderlink FC 2162.▪CLI tools are now packaged in the diagnostics package.▪An error message when saving a (multipath) path is no longer clobbered bysuccessfully saving the next path.▪Service now displays “replaced” and “failed” device status for firmware that repor ts it.▪Added a warning for users to backup RAID groups before converting.▪Added a notification for scheduled or canceled shutdowns is given on platforms that do not do this natively.▪Added menu items to rescan multipathing targets and controllers.▪Added the ability to remember login passwords.▪Modified behavior to indicate that a reboot is required instead of error code 0 when installing a Windows driver.∙Version 4.13 (Released 1/16/14)o The following apply to changes made from v4.12 to v4.13. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Support for PowerCenter Pro has been added▪Support for GT and 12Gb HBAs has been added to the diagnostic scripts▪The packaged CLI tools have been updated to the latest available version▪RAID group names are handled in a case sensitive manner▪Resolved an issue where ConfigTool Drive Metrics keep going even if an enclosure is unplugged.▪Fixed a problem where SNMP MIB information is incorrect for “raidMemberTable”▪Fixed an issue that caused a crash to occur if certain error codes are encountered.∙Version 4.12 (Released 10/28/13)o The following apply to changes made from v4.11 to v4.12. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Added support for Windows 8.1▪Corrected an error where the daemon failed to receive WMI events.▪Resolved an issue with link speed and topology are being marked “unknown” when connected to a 16Gb FibreConnect switch▪Fixed issue where help text hyperlinks were not working▪Fixed issue where help text does not open browser when clicking on website link∙Version 4.11 (Released 06/27/13)o The following apply to changes made from v4.10 to v4.11. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Added a checkbox on the RAID group Properties panel that indicates the RAID group is bootable.▪Resolved a hardware buzzer issue.▪The error message was clarified if the root certificate is missing.▪Thunderbolt diagnostics are collected when no RAID HBAs are presents.∙Version 4.10 (Released 03/12/13)o The following apply to changes made from v4.09 to v4.10. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Added support for dual domain devices.▪Added support for SSD RAID groups.▪Added support for maintaining health profile data for drive that use special characters in their serial number or other vital information.▪Added support to collect RAID firmware crash data.▪The SES slot number on the adapter drive table is displayed instead of SAS address.▪The name and type of device are properly indicated in the tree with multipathing.▪Devices are properly removed from the tree upon a cable pull.▪The S.M.A.R.T. data dialog no longer refuses to open with a message about the file being missing if the drive uses all 16 bytes of PRODUCT or all bytes of VENDOR area.▪The firmware version of the R60F expander is now displayed on the flash tab.▪The drive properties page has been rearranged so that all port addresses can bedisplayed.▪SAS or SATA is now indicated on the RAID drive properties page.▪An additional SNMP table is now provided to relay dual domain information.▪S.M.A.R.T. attributes are no longer validated, since some drives report values that are out of range which may cause the S.M.A.R.T. data dialog box from being displayed.▪The timezone for RAID adapters is now properly initialized, which fixes a one hour skew during standard time.▪Resolved an issue where the notification applet blinks when muted if the hardware buzzer is disabled.▪Resolved an issue where RAID firmware sends an un-terminated log message, causinga system crash.▪Any number of hotspares can now be created using the hotspare wizard. Also, the block size of the disks are now validated during member replacement and localhotspare creation.∙Version 4.09 (Released 11/29/12)o The following apply to changes made from v4.08 to v4.09. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪ A new tab has been added to manage NPIV settings.▪The ConfigTool now supports NPIV on windows platforms only.▪Celerity 16Gb support to the Windows and Linux diagnostic scripts.▪Devices can be added/removed in a rapid fashion without consequence .▪The adapter buzzer now sounds for non-Thunderbolt adapters when clicking the notification test button.∙Version 4.08 (Released 11/08/12)o The following apply to changes made from v4.07 to v4.08. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Added process power management events from the ESASRAID driver.▪Activated the on-board buzzer on the adapter that triggered a buzzer event only.▪Added detect mute button events from ThunderStream products.▪Resolved a timing related crash on shutdown if SNMP is enabled.▪Resolved a crash when committing the Notifications Plane contents with an email password.▪Resolved conflict with StorNext.▪Made changes to the operating system display for Window 8.∙Version 4.07 (Released 09/28/12)o The following apply to changes made from v4.05 to v4.07. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Removed the discovery mode option in the NVRAM panel for a 16Gb Celerity FC adapter.∙Version 4.05 (Released 08/13/12)o The following apply to changes made from v4.03 to v4.05. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Added support for OEM branding.▪Added support for time-stamped log messages from a RIAD device.∙Version 4.03 (Released 04/23/12)o The following apply to changes made from v4.02 to v4.03. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪The installer now makes the application available to all users.▪Several freezes in the system service have been resolved.▪Several crashes related to the auto discovery system were resolved.∙Version 4.02 (Released 02/14/12)o The following apply to changes made from v4.01 to v4.02. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪SNMP support has been added.▪Help menu now features a ‘Run Diagnostics’ option for troubleshooting purposes, which displaces the former option to save logs under the Notifications panel. RAIDlogging has also been improved.▪Support for FastFrame CT and NT adapter series has been added.▪Gen 3 PCIe transfer rate support has been added.▪Hot spares can now be assignable to RAID groups via CLI.▪Support for sounding the buzzer on buzzer-equipped hardware, controllable by the Notification Application.▪Performance, stability and logging improvements.∙Version 4.01 (Released 09/06/11)o The following apply to changes made from v4.0 to v4.01. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪The integrated help text features new icons for the buttons the user can click as well as manipulate in the table of contents.▪This release offers improved support and functionality with 3Gb RAID adapters.▪Rare instances of system hangs have been resolved.∙Version 4.0 (Released 08/17/11)o The following apply to changes made from v3.38 to v4.0. You must use the latest product drivers for your specific adapter whenever updating the ATTO Configuration Tool version. Thelatest driver sets can be accessed via the ATTO website.o New Features, Enhancements and Changes▪Support for ExpressSAS H6F0GT.▪This release represents a major update to the GUI interface and capabilities. Whereas previous versions contained a single application, this release provides a GUIapplication and system service. Refer to the product manual for more information onthe setup and operation of these components.▪This release offers the ability to set-up, manage and optimize storage connected locally and remotely to ATTO storage controllers. This includes the ability to remotely accessand update NVRAM settings, updating system firmware and drivers, as well asretrieving system event logs.▪Only one instance of the ConfigTool can be installed on a host at any one time (i.e.either v3.38 or v4.0, but not both).▪This version does not have SNMP enabled. Use an earlier version of the ATTOConfigTool if you require SNMP.3. Known Issues/Advisements∙The Notifications tab can be viewed and changed without logging into a host.∙The audible and visual notifications only work with the system service on the local machine (not remotely).∙Drives may not disappear in the ConfigTool if a cable is pulled with no IO.∙The ConfigTool client doesn’t detect when it has been disconnected from a daemon.∙Manually entered IP addresses or hostnames are not saved.∙Installer extraction process does not automatically start the installation process on Windows.∙The maximum transfer size control is no longer available in 4.xx.∙No warning message is displayed after resuming from “sleep” or “hibernate” to inform a u ser about the time required for the 3808 to boot.∙The ConfigTool installer may flag the installation with an error but no error occurred.∙User must terminate the ConfigTool to disconnect from a remotely connected host.∙The ConfigTool shows an incorrect date for the flash version.∙The ConfigTool many hang when running the diagnostics package when an R680 is in a bad state.∙The ConfigTool hangs at “Connecting” message box when MPD has missing LUNs.∙Volumes are not displayed when using Multipathing and Windows Server 2012.4. Affected ProductsATTO ConfigTool for the following ATTO products:CelerityFCExpressSAS H6xxExpressSAS H12xxExpressSAS R6xxThunderStream SC 3808D/EThunderlink FC 1082/2082/2162Thunderlink NS 1101/2102Thunderlink NT 1102/21025. Contacting ATTO SupportATTO Technology, Inc. is renowned for its technical support services. ATTO’s goal is to provide you the quickest response possible for your technical support needs, and is available Monday-Friday, 8:00 AM to 6:00 PM EST (except holidays).ATTO Technical Support can be contacted via phone or email:∙Phone: 716.691.1999 ext. 242∙E-Mail: ************************。