MOLEX-53261刺破式连接器
MOLEX汽车连接器产品大全-4
71349-X055
71349-X089
71349-X022
71349-X056
71349-X090
71349-X023
71349-X057
71349-X091
71349-X024
71349-X058
71349-X092
71349-X025
71349-X059
71349-X093
71349-X026
/product/cgrid/cgrid.html
D-31
2.54 (.100英寸) 引脚间距 C-Grid® 有罩接头
71349 双排，表面贴装 立式，配有或未配有固定栓
D
特点和优点 • 全防护塑壳，可在插拔时保护引脚 • 极化防误插槽在连接器插接时可引导导
向轨，以防止引脚被碰坏。 • 闩窗在插接后提供强制锁定 • 推压式固定栓在焊脚焊接时提供对印刷
参考信息 产品规格：PS-75100-001 包装：托盘包装 UL档案编号：E29179 CSA档案编号：LR19980 对配端：71973，带凸缘 设计计量单位：英寸
镀金：50次插拔
物理参数 塑壳：黑色耐高温热塑料，阻燃级别
为UL 94V-0级 端子材料：铜合金 电镀：见表
电镀方式
订购号
是否无铅
最薄15微英寸选择性镀金
15-47-76XX
最薄30微英寸选择性镀金
15-47-77XX
是
150微英寸镀锡/铅
15-47-75XX
用电路数量替换XX。 06-72 （仅为偶数）
镀金：50次插拔
D
设计计量单位：英寸
物理参数 塑壳：黑色聚酯，阻燃级别为UL 94V-0级
端子材料：铜合金
Molex 34062-000 电子连接器说明书
NOTES: VALID UNLESS OTHERWISE SPECIFIED 1. GENERAL:a. APPLICATION SPECIFICATION SEE: AS-34062-000 -CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -DESIGNED TO MATE WITH DEVICE CONNECTION AS SPECIFIED IN DRAWING EWCAP 150-S-002-1-Z01. AVAILIBLE AT /. -DESIGNED TO MATE WITH BLADE SEALED ASSEMBLY AS SPECIFIED IN DRAWING: SD-34675-001 -ASSEMBLY SHIPPED WITH TPA IN PRE-LOCK (SEE TPA PRE-LOCK VIEW IN SHEET 4)b. PRODUCT SPECIFICATION SEE: PS-34062-000 CONTAINS: SCOPE, PRODUCT DESCRIPTION, INTEGRAL COMPONENTS AND ACCESSORIES, APPLICABLE DOCUMENTS AND SPECIFICATIONS, RATINGS, PERFORMANCE, PACKAGING, GAUGE AND FIXTURES, AND OTHER INFORMATION. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-30907-879 d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: QEHS-699000-301e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) 2. DESIGN - MATERIALS:a. SEE BOM TABLE IN SD-34062-004 3. DESIGN - GEOMETRY:a. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL.b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX.e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD.THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION,AND CUSTOMER MATERIAL NUMBER.f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B)g. LASER MARKING: TBD TABLE OF CONTENTS SHEET NO.SHEET DESCRIPTION1NOTES 2, 3CONFIGURATIONS 4RECEPTACLE CONNECTOR ASSEMBLY 5MOLEX INTERFACEJ19NX RE-MASTERING J18ADDED DIM ICD 64REV.DESCRIPTION INSPECTION BALLOON NUMBER LOG GENERAL TOLERANCES (UNLESS SPECIFIED)ANGULAR TOL ± 3.0°4 PLACES±3 PLACES±THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM 4:1DRWN BY DATE KCUNNINGHAM 2011/11/08CHK'D BY DATE MX150 2 WAY CABLE SEAL RECEPTACLE CONN. SYSTEM (5.0MM PITCH)2017/05/152017/06/14QUALITY SYMBOLS =0=0=0CPA OPTIONAL SEE BOM CONNECTOR HOUSING FOR OPTIONS SEE BOM RING SEAL FOR OPTIONS SEE BOM TPA B B C CD DE EF FG GHH JJ K K L LSHEET DESCRIPTIONCONFIGURATIONS OPTION B OPTION COPTION EOPTION F2.255.504X 1.50R 3.0±1.0R OPTION A OPTION DGENERAL TOLERANCES (UNLESS SPECIFIED)ANGULAR TOL ± 3.0°4 PLACES ±3 PLACES±THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM 2:1DRWN BY DATE KCUNNINGHAM 2011/11/08CHK'D BY DATE MX150 2 WAY CABLE SEAL RECEPTACLE CONN. SYSTEM (5.0MM PITCH)2017/05/152017/06/14QUALITY SYMBOLS =0=0=05.504X 1.50R NON CLIP-SLOT OPTIONSCALE 4:1MINIMUM PASS-THRU WITH NO CLEARANCE APPLIES TO NON-CLIP SLOT OPTIONS A, C, D & G23.40⌀MINIMUM PASS-THRU WITH NO CLEARANCE APPLIES TO NON-CLIP SLOT OPTIONS B, E & F26.00⌀6.50REAR VIEWREAR VIEWB BC CD DE EF FG GHH J JK KL LGENERAL TOLERANCES (UNLESS SPECIFIED)ANGULAR TOL ± 3.0°4 PLACES ±3 PLACES±THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM 2:1DRWN BY DATE KCUNNINGHAM 2011/11/08CHK'D BY DATE MX150 2 WAY CABLE SEAL RECEPTACLE CONN. SYSTEM (5.0MM PITCH)2017/05/152017/06/14QUALITY SYMBOLS =0=0=0SHEET DESCRIPTIONCONFIGURATIONS MINIMUM PASS-THRU WITH NO CLEARANCE APPLIES TO CLIP-SLOT OPTIONS A, C & D25.50⌀MINIMUM PASS-THRU WITH NO CLEARANCE APPLIES TO CLIP-SLOT OPTION B 26.00⌀OPTION B W/CLIP-SLOT *OPTION C W/CLIP-SLOT ** WITH CLIP-SLOT CONFIGURATIONSDO NOT MEET USCAR PACKAGING FRAME REQUIREMENTSCLIP-SLOT OPTION SCALE 4:1OPTION A W/CLIP-SLOT *6.50 2.255.503.0±1.0R 4X 1.50R 5.504X 1.50R OPTION D W/CLIP-SLOT *B B C CD DE EF FG GH HJ JK KL LGENERAL TOLERANCES (UNLESS SPECIFIED)ANGULAR TOL ± 3.0°4 PLACES ±3 PLACES ±THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM 4:1DRWN BY DATE KCUNNINGHAM 2011/11/08CHK'D BY DATE MX150 2 WAY CABLE SEAL RECEPTACLE CONN. SYSTEM (5.0MM PITCH)2017/05/152017/06/14QUALITY SYMBOLS =0=0=0SHEET DESCRIPTIONRECEPTACLE CONNECTOR ASSEMBLY OPTIONAL LASER MARKING SURFACESEE NOTE 3g 3.3532.230.85±0.20HOUSING MOLD CAVITY CODE RECYCLE CODE TERMINAL CAVITY ID.MANUFACTURINGLOCATION CODETERMINAL CAVITY IDCHARTED DIMENSIONS CONFIGURATIONS DIMENSIONS A B OPTIONS A, C, D16.622.0OPTION B16.623.9OPTION E20.223.9OPTION F16.623.9OPTION G18.422.0OPTIONS A, C, D W/CLIP-SLOT19.222.0OPTION B W/CLIP-SLOT19.223.9OPTIONAL LASER MARKING SURFACESEE NOTE 3gSECTION B -B B B TPA SHOWN IN5.00 2.50DIM A MAX.DIM B MAX.AA31.30B B C CD DE EF FG GH HJJ K KL LMX150 2 WAY CABLE SEAL RECEPTACLE CONNECTION SYSTEM (5.0mm PITCH)BOM AND PIN OUT SHEET ABBREVIATION COLOR MATERIAL A-BLK BLACK PA6 GF30B-LG LIGHT GRAY PA6 GF30B-BLK BLACK PA6 GF30C-BLKBLACK PA6 GF30D-BLKBLACK PA6 GF30D-LGLIGHT GRAY PA6 GF30E-BLKBLACK PA6 GF30F-LGLIGHT GRAY PA6 GF30G-BLKBLACK PA6 GF30A-BLK-CLIPBLACK PA6 GF30B-LG-CLIPLIGHT GRAY PA6 GF30B-BLK-CLIPBLACK PA6 GF30C-BLK-CLIPBLACK PA6 GF30D-BLK-CLIPBLACK PA6 GF30D-LG-CLIPLIGHT GRAY PA6 GF30A-BLK-SVBLACK PA6 GF30C-BLK-SVBLACK PA6 GF30D-BLK-SVBLACK PA6 GF30R3MEDIUM BLUE INHERENTLY LUBRICATED SILICONE R4GREEN INHERENTLY LUBRICATED SILICONE CPARED PBT GF30TPA NATURAL PBT GF30FOR ADDITIONAL INFORMATION SEE SD-34062-002HOUSING OPTION/COLOR TPA CPA RING SEAL OPTION A, BLACK, W/O CPA34062-0021A-BLK TPA R3-40°C TO 125°C 12SALEABLE OPTION B, LIGHT GRAY, W/O CPA34062-0022B-LG TPA R3-40°C TO 125°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION C, BLACK, W/O CPA34062-0023C-BLK TPA R3-40°C TO 125°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION D, BLACK, W/O CPA34062-0024D-BLK TPA R3-40°C TO 125°C 12SALEABLE OPTION D, LIGHT GRAY, W/O CPA34062-0029D-LG TPA R3-40°C TO 125°C 12SALEABLE OPTION A, BLACK, W/ CPA34062-0025A-BLK TPA CPA R3-40°C TO 125°C 12SALEABLE OPTION B, LIGHT GRAY, W/ CPA34062-0026B-LG TPA CPA R3-40°C TO 125°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION C, BLACK, W/ CPA34062-0027C-BLK TPA CPA R3-40°C TO 125°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION D, BLACK, W/ CPA34062-0028D-BLK TPA CPA R3-40°C TO 125°C 12SALEABLE OPTION D, LIGHT GRAY, W/ CPA34062-0030D-LG TPA CPA R3-40°C TO 125°C 12SALEABLE OPTION A, BLACK, WITH CLIPSLOT, W/O CPA34062-0031A-BLK-CLIP TPA R3-40°C TO 125°C 12SALEABLE OPTION B, LIGHT GRAY, WITH CLIPSLOT, W/O CPA34062-0032B-LG-CLIP TPA R3-40°C TO 125°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION C, BLACK, WITH CLIPSLOT, W/O CPA34062-0033C-BLK-CLIP TPA R3-40°C TO 125°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION D, BLACK, WITH CLIPSLOT, W/O CPA34062-0034D-BLK-CLIP TPA R3-40°C TO 125°C 12SALEABLE OPTION D, LIGHT GRAY, WITH CLIPSLOT, W/O CPA34062-0035D-LG-CLIP TPA R3-40°C TO 125°C 12SALEABLE OPTION A, BLACK, WITH CLIPSLOT, W/ CPA34062-0036A-BLK-CLIP TPA CPA R3-40°C TO 125°C 12SALEABLE OPTION B, LIGHT GRAY, WITH CLIPSLOT, W/ CPA34062-0037B-LG-CLIP TPA CPA R3-40°C TO 125°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION C, BLACK, WITH CLIPSLOT, W/ CPA34062-0038C-BLK-CLIP TPA CPA R3-40°C TO 125°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION D, BLACK, WITH CLIPSLOT, W/ CPA34062-0039D-BLK-CLIP TPA CPA R3-40°C TO 125°C 12SALEABLE OPTION D, LIGHT GRAY, WITH CLIPSLOT, W/ CPA34062-0040D-LG-CLIP TPA CPA R3-40°C TO 125°C 12SALEABLE OPTION A, BLACK, SEVERE VIBRATION, W/ CPA34062-4006A-BLK-SV TPA CPA R4-40°C TO 155°C 12SALEABLE OPTION C, BLACK, SEVERE VIBRATION, W/ CPA34062-4008C-BLK-SV TPA CPA R4-40°C TO 155°C 12SALEABLE PREFERRED, FULLY SHROUDED OPTION D, BLACK, SEVERE VIBRATION, W/ CPA34062-4009D-BLK-SV TPA CPA R4-40°C TO 155°C 12SALEABLE OPTION E, BLACK, W/O CPA34062-0041E-BLK TPA R4-40°C TO 155°C 2SALEABLE PREFERRED, FULLY SHROUDED OPTION F, LIGHT GRAY, W/O CPA34062-0042F-LG TPA R4-40°C TO 155°C 2SALEABLE PREFERRED, FULLY SHROUDED OPTION G, BLACK, W/O CPA34062-0043G-BLK TPA R4-40°C TO 155°C 2SALEABLE PREFERRED, FULLY SHROUDED OPTION E, BLACK, W/ CPA34062-0044E-BLK TPA CPA R4-40°C TO 155°C 2SALEABLE PREFERRED, FULLY SHROUDED OPTION F, LIGHT GRAY, W/ CPA34062-0045F-LG TPA CPA R4-40°C TO 155°C 2SALEABLE PREFERRED, FULLY SHROUDED OPTION G, BLACK, W/ CPA34062-0046G-BLK TPA CPA R4-40°C TO 155°C 2SALEABLE PREFERRED, FULLY SHROUDED OPTION A, BLACK, W/ CPA34062-0047A-BLK TPA CPA R3-40°C TO 125°C 12SALEABLE OPTION B, LIGHT GRAY, W/O CPA34062-0048B-LG TPA R4-40°C TO 155°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION C, BLACK, W/O CPA34062-0049C-BLK TPA R4-40°C TO 155°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION B, LIGHT GRAY, W/ CPA34062-0050B-LG TPA CPA R4-40°C TO 155°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION C, BLACK, W/ CPA34062-0051C-BLK TPA CPA R4-40°C TO 155°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION B, LIGHT GRAY, WITH CLIPSLOT, W/O CPA34062-0052B-LG-CLIP TPA R4-40°C TO 155°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION C, BLACK, WITH CLIPSLOT, W/O CPA34062-0053C-BLK-CLIP TPA R4-40°C TO 155°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION B, LIGHT GRAY, WITH CLIPSLOT, W/ CPA34062-0054B-LG-CLIP TPA CPA R4-40°C TO 155°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION C, BLACK, WITH CLIPSLOT, W/ CPA34062-0055C-BLK-CLIP TPA CPA R4-40°C TO 155°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION C, BLACK, SEVERE VIBRATION, W/O CPA34062-4003C-BLK-SV TPA R4-40°C TO 155°C 12SALEABLE PREFERRED, FULLY SHROUDED OPTION D, BLACK, SEVERE VIBRATION, W/O CPA34062-4004D-BLK-SV TPA R4-40°C TO 155°C 12SALEABLE OPTION D, BLACK, WITH CLIPSLOT, W/ CPA34062-0056D-BLK-CLIP TPA CPA R4-40°C TO 155°C 12SALEABLE OPTION A, BLACK, WITH CLIPSLOT, W/ CPA34062-0057A-BLK-CLIP TPA CPA R3-40°C TO 125°C 12SALEABLE OPTION B, BLACK, W/O CPA34062-0058B-BLK TPA R3-40°C TO 125°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION B, BLACK, W/ CPA34062-0059B-BLK TPA CPA R3-40°C TO 125°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION B, BLACK, WITH CLIPSLOT, W/O CPA34062-0060B-BLK-CLIP TPA R3-40°C TO 125°C 123SALEABLE PREFERRED, FULLY SHROUDED OPTION B, BLACK, WITH CLIPSLOT, W/ CPA 34062-0061B-BLK-CLIP TPA CPA R3-40°C TO 125°C 123SALEABLE PREFERRED, FULLY SHROUDEDCOMMENTS INSERT, TPA 13HOUSING OPTION C - SEVERE VIBRATION HOUSING OPTION D - SEVERE VIBRATION RING SEAL TEMP. CLASS 3RING SEAL TEMP. CLASS 4CPA 2RECOMMENDED MATING DEVICEPRODUCTION TOOL STATUS ASSEMBLY DESCRIPTION ASSEMBLY PART NUMBERCOMPONENTTHE PRESENCE OF AN ABBREVIATION INDICATES THE PRESENCE OF THAT COMPONENT.ASSEMBLY OPERATING TEMPERATURE HOUSING OPTION D WITH CLIPSLOT E-34675-001MOLEX INLINE MALE CONNECTOR 3HOUSING OPTION C WITH CLIPSLOT HOUSING OPTION F HOUSING OPTION G HOUSING OPTION A WITH CLIPSLOT HOUSING OPTION B WITH CLIPSLOT cart 150-S-002-1-Z01HOUSING OPTION B 2MOLEX INTERFACE SD-34062-002SHEET 5HOUSING OPTION D HOUSING OPTION E HOUSING OPTION A - SEVERE VIBRATION HOUSING OPTION B WITH CLIPSLOT BOM/ APPLICABLE COMPONENTS TABLE HOUSING OPTION D WITH CLIPSLOT RECOMMENDED MATING DEVICE TABLEDESCRIPTION HOUSING OPTION A HOUSING OPTION B ABBREVIATION DESCRIPTION DRAWINGINFORMATION ADDITIONAL INFORMATIONUSCAR INTERFACE 1HOUSING OPTION C HOUSING OPTION D ECN NO.: 614442DATE:2019/3/26DOCUMENT NO.: SD-34062-004REVISION: A3PAGE: 1 OF 1。
Molex 0502128000 微型锁扣母端子 2.00mm 间距、锡（Sn）镀层、24-30 A
Twisted Wire
This document was generated on 09/29/2022
PLEASE CHECK FOR LATEST PART INFORMATION
Series image - Reference only
EU ELV Compliant
EU RoHS
China RoHS
Compliant
REACH SVHC
Not Contained Per -
D(2022)4187-DC (10
June 2022)
Halogen-Free
Status
Low-Halogen
Crimp Terminals 50212 Automotive, Signal, Wire-to-Board Yes Micro-Latch Wire-to-Board Connector System 502128100 (Loose) DuraClik, Mi II, Micro-Latch, Sherlock Crimp Terminals 800753644625
Micro-Latch Wire-to-Board Connector System 2.00mm Pitch, Micro-Latch Female Crimp Terminal, Tin (Sn) Plating, 24-30 AWG, Reel
Documents: 3D Model (PDF) 3D Model Drawing (PDF) Product Specification 510650000-PS-000 (PDF) Product Specification 510651000-PS-000 (PDF) Product Specification PS-51089-001-001 (PDF) Product Specification PS-51089-005-001 (PDF) Product Specification PS-51090-003-001 (PDF) Product Specification PS-51090-004-001 (PDF) Product Specification PS-51090-005-001 (PDF) Product Specification PS-51090-009-001 (PDF) Product Specification PS-51090-016-001 (PDF) Product Specification PS-51090-017-001 (PDF) Product Specification PS-51090-018-001 (PDF)
Molex电子技术（LLC）产品说明书：76145型号的连接器组装
GENERALTOLERANCES(UNLESS SPECIFIED)ANGULAR TOL ±0.5°4 PLACES ±3 PLACES ±THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSIONDIMENSION UNITS SCALE MM 4:1DRWN BYDATEMSANDBERG2007/12/26CHK'D BYDATEIMPACT 6 PAIR HEADERRIGHT GUIDED ASSEMBLY SALES DRAWINGE D T O N X2017/10/302017/10/312017/11/02ZZSECTION Z -Z8.502.9528.922.9513.210.95(ADD FOR END WALL)1.35B 4.751.9017X1.35SIGNAL HOLESREFGROUND HOLESREFROW L ROW K ROW J ROW D ROW C ROW O ROW B ROW H ROW G ROW F ROW E ROW S ROW N ROW P ROW R ROW M ROW A ROW TKEEP OUT ZONESEE PART NUMBER CHARTANDPART NUMBER LOGIC (18 HOLES PER COLUMN)SEE NOTE #7UNPLATED SCREW HOLE3.56±0.08⌀⌖⌀0.10⌖⌀0.15PIN A11.901.4TAIL LENGTHMINIMUM BOARD1.002.64KEY SHOWN IN POSITION 'A'28.9+0.2-0.5B17X1.35P ±0.2022.9511.9528.620.4(PIN LENGTH)NOTCH DESIGNATESROW AA NOTES:1. MATERIALS: HOUSING - LIQUID CRYSTAL POLYMER (LCP)GLASS-FILLED, UL94V-0TERMINALS - HIGH PERFORMANCE COPPER ALLOY 2. FINISH: 30µ MIN GOLD IN CONTACT AREA. SELECTIVE TIN ON PCB TAILS. NICKEL OVERALL.3. REFER TO MOLEX PRODUCT SPECIFICATION PS-76060-999FOR PERFORMANCE SPECIFICATIONS AND ADDITIONAL PCB INFORMATION. 4. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF MOLEX COSMETIC SPEC PS-45499-002. 5. PACKAGE PER: PK-70873-760.6. SEE SHEETS 2 & 3 FOR PART NUMBERS AND BOARD RELATIONSHIPS.7. FOR GROUNDED GUIDE PINS USE DIA. 3.56 +/-0.08 (PTH) DIA. 3.66 (DRILL) AND DIA 6.5 (PAD).8. MATES WITH IMPACT DC SERIES NO. 76150.9. KEEP OUT ZONE FOR BP HOUSING LENGTH INCLUDES AN ADDITIONAL 1.0MM TO ACCOMMODATE FOR SPACE REQUIRED BY DC FRONT HOUSING.10. REFER TO MOLEX PCB ROUTING GUIDE AS-76060-990 FOR ANTIPAD AND ROUTING RECOMMENDATIONS. 11. CONNECTORS SUPPLIED WITH A 2-56 UNC-2A SCREW.RIGHT GUIDEDBACKPLANE HOLE PATTERN(CONNECTOR SIDE)SEE NOTE 12BBC CDDEEFFGGHHJJKKLLGENERALTOLERANCES(UNLESS SPECIFIED)ANGULAR TOL ±0.5°4 PLACES ±3 PLACES ±THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSIONDIMENSION UNITS SCALE MM 4:1DRWN BY DATEMSANDBERG2007/12/26CHK'D BYDATEIMPACT 6 PAIR HEADERRIGHT GUIDED ASSEMBLY SALES DRAWINGE D T O N X2017/10/302017/10/312017/11/02MATERIAL NUMBER # OF COLUMNS # OF DIFF PAIR DIM 'A'DIM 'B'GUIDE RIGHT OPEN WALL OPTION76145-*1**106025.517.1076145-*7**148433.124.7076145-*6**169636.928.50MATERIAL NUMBER# OF COLUMNS # OF DIFF PAIR DIM 'A'DIM 'B'GUIDE RIGHT END WALL OPTION76145-*1**106026.917.1076145-*7**148434.524.7076145-*6**169638.328.50GUIDE RIGHT OPEN WALL OPTIONGUIDE RIGHT END WALL OPTION76145 -****PIN LENGTH (P)KEY ORIENTATION 0 = NO KEY 1 = A 2 = B 3 = C 4 = D 5 = E 6 = F 7 = G 8 = H# OF COLUMNS 1 = 10 COL 6 = 16 COL 7 = 14 COLMODULE TYPE5 = GUIDE RIGHT, TIN9 = GUIDE RIGHT END WALL, TIN3 = 4.50 (SHORT COMPLIANT, 0.46±0.05 PTH)4 = 4.90 (SHORT COMPLIANT, 0.46±0.05 PTH)5 = 5.50 (SHORT COMPLIANT, 0.46±0.05 PTH)6 = 4.50 (MICRO COMPLIANT, 0.39±0.05 PTH)7 = 4.90 (MICRO COMPLIANT, 0.39±0.05 PTH)8 = 5.50 (MICRO COMPLIANT, 0.39±0.05 PTH)PART NUMBER LOGICPART NUMBER TABLEBBC CDDE EF FG GHHJ JKKLLGENERALTOLERANCES(UNLESS SPECIFIED)ANGULAR TOL ±0.5°4 PLACES ±3 PLACES ±THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSIONDIMENSION UNITS SCALE MM 4:1DRWN BYDATEMSANDBERG2007/12/26CHK'D BYDATEIMPACT 6 PAIR HEADERRIGHT GUIDED ASSEMBLY SALES DRAWINGE D T O N X2017/10/302017/10/312017/11/02IMPACT 6 PAIRBOARD RELATIONSHIPSBP ROW ADCARD PCBBPLANE PCBBP HOLE COLUMN (COLUMN 10 REF)DC HOLE COLUMN (COLUMN 10 REF)DCARD ROW ABPLANE PCBDCARD PCBDCARD ROW AB P R O W A0.35OFFSET BETWEEN DC ANDBP HOLE COLUMNS28.93.011.9514.0BBC CDDE EF FGGH HJ JKKLL。
SAKDU接线端子样本
订货号 1129350000 1129370000 1129380000 1129390000
数量 50 50 50 20
订货号 0545400000 0545300000 0546000000
订货号 1129470000
数量 10 10 10
数量 20
型号 SAKQ 10/2 SAKQ 10/3 SAKQ 10/4 SAKQ 10/10
技术参数
额定参数 额定电压 额定电流 额定压接面积 额定冲击电压/污染等级 测量规根据IEC947-1/阻燃等级根据UL94
压接的导线 单股硬导线/多股硬导线 软导线/带管状端头的软导线 压接时的拧紧扭矩 剥线长度/螺丝刀尺寸
压接两根截面积相同的导线 单股硬导线/多股硬导线 软导线/带管状端头的软导线
1129450000
50
型号 SD 0.6X3.5
订货号 9008330000
型号
订货号
SAKEW 35
1129450000
数量 1
数量 50
型号
订货号
DEK 5/5.5 PLUS MC NE
1125030000
数量 1000
型号 DEK 5/6 PLUS MC NE WS
订货号 1011320000
魏德米勒电联接国际贸易(上海)有限公司成立于2001年7月，是魏德米勒集团服务于中国 市场的销售服务机构，拥有覆盖全国的销售网络和完善的售后服务体系，全国设有15个 销售办事处，可以为中国市场的客户提供专业的行业应用解决方案和优质的产品。同时 在上海外高桥保税区，魏德米勒拥有一个超过4,000平方米的物流仓储中心和产品加工中 心，满足客户的实际需求。
15.9/52/59 125/35 2.5…35
Molex 76650-0225 电路板电缆连接器说明书
Datasheet for 76650-02253, 4 and 6 Circuits Product HighlightsWire size:28-22 AWG(1.5 - 3) Amps depending on AWG 250 Volts Voltage:Current:Features and BenefitsApplications • Data communication equipment • Printers and faxes • PCs and monitors • Automotive • Friction lock provides good matingretention• Box-style contact protects contact area• Polarizing features ensures propermating• Guide rails and molded ledgesfacilitates mating and unmating Receptacle and Header Vertical General InformationMolex / Waldom Wire-to-Board 2.50mm (.098")Kit assembled in U.S.A.Description:Product Family:Pitch:Mini-Latch connectors provide a reliable interface for industry-standard 2.50mm(.098" ) wire-to-board applications. The system includes a box-style contactdesign and housing-side terminal latch to provide protection to the contact areaduring and after assembly. The durable housing also includes guide rails andmolded tabs to facilitate mating and unmating.Manufacturer:Country of Origin:Mini-Latch™Certificates:Friction Lock Vertical Header and Receptacle (Molex parts within this kit) - EU and China RoHS Compliant, UL and CSA Circuit Sizes:MountingOrientation:Connector Type:SpecificationsPart Number:DesignConfiguration:76650-0225Title:Mini-Latch Connector KitDatasheet for 76650-0225Molex Part No.Quantity in Kit 50802-91016551191-0300551191-0400551191-0600522-04-1031522-04-1041522-04-10615Molex Part No.63811-5200 *Japan Bill of Materials for Part No. 76650-0225Mini-Latch™ Female Crimp Terminals 28-22 AWG Countryof OriginDescription 2.50mm (.098") Pitch Mini-Latch™ Receptacles, 6 Circuits 2.50mm (.098") Pitch Vertical Header 3 Circuits 2.50mm (.098") Pitch Vertical Header 6 Circuits Japan 2.50mm (.098") Pitch Vertical Header 4 Circuits 2.50mm (.098") Pitch Mini-Latch™ Receptacles, 4 Circuits China Japan *Tool(s) not included in kit. Tool(s) ordered separately.Recommended Molex Tool(s) for Part No. 76650-0225*Countryof OriginDescriptionHand Crimp Tool Germany China 2.50mm (.098") Pitch Mini-Latch™ Receptacles, 3 Circuits Japan ChinaMouser ElectronicsAuthorized DistributorClick to View Pricing, Inventory, Delivery & Lifecycle Information:M olex:76650-0225。
molex端子压接
介绍首先，了解端子具有三个主要部分：插接区、过渡区和压接区(图A)，这有助于我们理解。
顾名思义，插接区是端子与另一半连接端子插接的部分。
该部分由连接器设计师设计为与对接端子接合，并以一定的方式工作。
如果压接过程中接合部变形，将会降低连接器的性能。
过渡区同样设计为在压接过程中不受影响。
如果您改变了弹性片或端子止口的位置，同样将影响连接器的性能。
压接区是唯一设计受到压接工艺影响的部分。
使用连接器制造商推荐的端接设备，夹紧压接区，从而牢固地与线缆连接。
理想情况下，您将端子压接在线缆上的所有工作仅发生在压接区。
正确执行的压接示例参见图B。
绝缘压接区压缩绝缘层，但不会刺穿。
线芯（或线刷）伸出于导体压接区前部的距离至少等于线缆导体的直径。
例如，18 AWG线缆应伸出至少.040"。
在绝缘和导体压接区之间的部分可以看见绝缘层和导体。
导体压接区在引入端和尾端呈喇叭形，而过渡区和接合区在压接工艺前后始终保持不变。
如果您的压接端子看起来和图B中的端子不同，可能是因为在压接工艺中出现了错误。
这里是压接工艺中可能出现的13个最常见的问题，以及如何避免它们。
1. 压接高度过小达0.002"。
在如此严格的规范下，检验压接机是否设置正确对于获得良好压接是非常重要的。
过小(图I)或过大(图II)的压接高度无法提供规定的压接强度（对线缆端子的保持力），会减小线缆拉拔力和额定电流，一般情况下还会引起压接头在非正常的工作条件下性能降低。
过小的压接高度还会压断线芯或者折断导体压接区的金属。
2. 压接高度过大没有足够的金属间接触。
问题#1 & #2的解决方法很简单：调节压接机上的导体压接高度。
在首次使用压接机进行工作时，使用图B, 中所示的游标卡尺或千分尺检验压接高度在规定范围内，并且在工作过程中应按照要求的频度重新检查，以保持正确的压接高度。
3. &4. 绝缘压接区过小或过大(图 III 和 图 IV)由于绝缘类型和厚度的多样性，连接器制造商一般不会提供绝缘层的压接高度。
刺破式连接器部分技术要求
IDC使用的电子线
绞距越短，铜丝束越牢固。这对于把电线压进刺破式端子的刀 槽中的工序来说，非常重要。如果绞距太长，铜丝束过于松散 ，会造成压接不良。铜丝之间、铜丝跟刺破式端子槽的内壁之 间均须紧密接合，接合越松散，越容易导致压接不良。 对压接良好的刺破式端子来说，标准的绞距值为20mm。
另一个基本要素是电线绝缘层的硬度值：90±5 Shore A。
IDC‘s使用的电子线
•电线的结构
当然，均称的电线结构也决定了特有的铜丝数量：7根、9根、37 根……
12根
24根
37根
从上图中可以看出，12/24根的芯线形状并不均称，因此， 在压接过程中，电线在刺破式端子的刀槽中的接合质量取决 于铜丝的位置。
IDC使用的电子线
IDC类型 RAST 2,5 RAST 2,5 pro
IDC测试
IDC刺破式连接器的测试流程 目测:
• 电子线在触片缝隙中的位置
• 压接后电线的形状
上图：RAST2.5系列电线的位置
在IDC中的位置不合格
线径不适合IDC
电线与 IDC不符
压接正确
正确的IDC压接
Testing IDC‘s
不正确的IDC压接
IDC使用的电子线
•电线绞距和绝缘层硬度值
电线绞距并非关键的质量指标，但它是影响刺破式压接的基本要
0.5 0.5 0.75
0.35 0.5 0.5 0.75 1 1.5
0.5 0.5 0.75
ECO - DOMO 间插式
ECO - DOMO 直插式
IDC连接器适用的标准电线规格
绝缘直径 [mm]
绝缘层材质
绝缘层肖氏 硬度值
线芯绞距 [mm]
结构