10 WEBs-Niagara Report V1.0

合集下载

niagara中间件软件安装及测试

niagara中间件软件安装及测试
使用交叉网线将M4网关与PC相连后,开启网络调试助手,建立连接。点击M4网关屏幕上的Ethernet按键,进入下面见面:
如果M4网关的网口正常,网络调试助手接收区域将收到FE 09 01 00 02 00 0001 F5(M4网关向PC发送的心跳)信息,如下图所示:
当调试助手上接收到心跳超过4个时,PC端未回复心跳,M4网关将会发出警报声。在网络调试助手的发送区域输入FE 05 01 906A(PC回复网关心跳信息),点击发送,如果网关成功接收到该信息,网关将关闭报警声;如果警报声没有停止,说明网关网口接收数据存在问题。
如果M4网关与AP通信正常,网络调试助手接收区域将收到FE 09 01 00 02 00 0001 F5(M4网关向PC发送的心跳)信息,如下图所示:
当调试助手上接收到心跳超过4个时,PC端未回复心跳,M4网关将会发出警报声。在网络调试助手的发送区域输入FE 05 01 906A(PC回复网关心跳信息),点击发送,如果网关成功接收到该信息,网关将关闭报警声;如果警报声没有停止,说明网关通过WIFI接收数据存在问题。
6
6.1
用万用表测试左右扇面的24V+与24VG是否短路
用万用表测试左右扇面的5V与5VG是否短路
电源没有短路即可上电,若有短路,排查短路原因。
6.2
6.2.1
1、将U盘中的文件拷贝到一体机D盘下。
2、安装IndyTool v2.3.0,找到D:\一体机软件\R2000\IndyTool中的图标 ,双击进行安装。
在channel 0上右击:
选择Link From’fan’后出现如下界面,按界面色框选中选项:
点击OK,变量变为如下(右侧多个link标志):
alarm 和motor 及DA 变量建立Link的方法同上,只是选择的Equipment4中的channel不同:

霍尼韦尔WEBS培训资料

霍尼韦尔WEBS培训资料

WEBs LABLAB 2 WEB AX Station Software Installation & Registration (3)LAB 3 Niagara Workbench Overview (9)1. Open Platform 打开Platform (9)2. Start a Station 运行一个站点 (9)3. View the Demo 浏览演示站点 (10)4. Stop a Station 停止一个站点 (11)LAB 4 Create a New Station (13)LAB 5 Programming for AHU (17)LAB 6 Graphics 图形界面 (27)1. Create folders for graphics建立图形文件夹 (27)2. Create a New View of the folder 为文件夹建立图形页面 (27)3. Switch between View and Edit Mode of Px sheet (29)4. Px sheet in file system and Delete Px sheet (29)5. Add graphics from WEBsAX library (30)6. Link Graphics and points 连接图形和点 (32)7. Import your custom graphics 导入自定义图形 (37)8. Add controllable modules from WEBsAX Library (37)9. Advanced Graphic: Panes 高级图形工具 (40)10. Link from page to page 连接页面到页面 (41)11. Make Nav File 制作Nav导航文件 (43)12. Use IE view the graphic 使用IE浏览器查看 (43)LAB 7 Alarm 报警 (45)1. Add Alarm Service 添加Alarm报警服务 (45)2. Set Alarm Class 设定报警分类 (45)3. Add Alarm Recipient 添加报警接收处理 (45)4. Add Alarm Extension to the Point 添加报警扩展到点 (46)5. Using Alarm Portal (48)6. HyperLink to Alarm Console 连接到报警控制台 (50)LAB 8 Schedule 时间表 (51)1. Add Weekly Schedule (51)2. Add Calendar Schedule module to Wire Sheet (54)3. Add Trigger Schedule module to Wire Sheet (54)4. HyperLink to Schedule 连接到时间表 (55)LAB 9 History and Dynamic Trend 历史记录和动态趋势 (56)History (56)1. Add History Service 添加History历史服务 (56)2. Add History Extension to the Points 添加历史记录扩展到点 (56)3. Modify the History Extension Property 修改历史记录扩展属性 (56)4. History Config 配置历史记录 (57)5. View the History 查看历史记录 (57)6. Manager the History 管理历史记录 (59)7. HyperLink to History 连接到历史纪录 (60)Dynamic Trend (61)LAB 10 Report /Email 报表和邮件 (62)Report Service: (62)1. Add Report Service 添加Report报表服务 (62)2. Layout report data in a ComponentGrid 设定报表格式 (62)3. Create a Px page display of the report 为报表建立一个图形页面 (64)4. Create and configure ExportSource component (67)Email Service (67)1. Add Email Service 添加Email服务 (67)2. Add email account 添加email 帐户 (68)3. Add EmailRecipient to ReportService (68)4. Add EmailRecipient to AlarmService (69)LAB 11 Security 安全设定 (71)1. Configure CategoryService (71)2. Assign Components to Categories 分配组件到分类目录 (71)3. Configure User Service 配置用户服务 (72)LAB 12 Commissioning WEBs Controller (74)LAB 13 Use a Spyder as Lon I/O for WEBs (84)LAB 14 Link Station to Station (98)LAB 15 Module Library and Reuse 模块库和重复利用 (106)1. Import new modules 导入新的模块 (106)2. Customize a palette 自定义palette (106)3. Reuse Program 重复利用程序 (107)4. Reuse Graphic 重复利用图形 (108)LAB 16 Backup 备份 (109)1. Back up the Station 备份工作站 (109)2. Restore the Station还原工作站备份 (110)3. Histories Archive 历史记录归档 (112)LAB 17 Spyder Commissioning (117)LAB 2 WEB AX Station Software Installation & Registration Objectives:Get to know the installation and registration process.了解安装和注册的过程。

高效液相色谱-串联质谱法检测动物性食品中氟吡菌胺、氟吡菌酰胺、螺虫乙酯残留量

高效液相色谱-串联质谱法检测动物性食品中氟吡菌胺、氟吡菌酰胺、螺虫乙酯残留量

高效液相色谱-串联质谱法检测动物性食品中氟吡菌胺、氟吡菌酰胺、螺虫乙酯残留量陈 盛(上海必诺检测技术服务有限公司,上海 201114)摘 要:建立高效液相色谱-串联质谱法测定动物性食品中氟吡菌胺、氟吡菌酰胺、螺虫乙酯残留量的方法。

样品采用QuEChERS法净化,以0.1%甲酸水溶液(含10 mmol乙酸铵)及乙腈为流动相进行梯度洗脱,通过Poroshell 120 EC-C18液相色谱柱分离,以电喷雾正离子(ESI+)多反应监测模式对目标物进行定性定量分析。

该方法在2~200 μg·L-1线性良好,相关系数均>0.992,方法检出限为0.01 mg·kg-1,定量限为0.03 mg·kg-1。

在加标水平为0.03 mg·kg-1、0.10 mg·kg-1、0.30 mg·kg-1时,方法的回收率为80.3%~94.3%,RSD在4.3%~8.7%。

该方法操作简便、检测效率高,分离目标物效果好,可以满足动物性食品中氟吡菌胺、氟吡菌酰胺、螺虫乙酯残留量的检测。

关键词:高效液相色谱-串联质谱法(LC-MS/MS);动物性食品;氟吡菌胺;氟吡菌酰胺;螺虫乙酯High Performance Liquid Chromatography-Tandem Mass Spectrometry for the Determination of Fluopicolide, Fluopyram and Spirotetramat Residues in Animal FoodCHEN Sheng(Shanghai Bino Testing Service Co., Ltd., Shanghai 201114, China)Abstract: Establish a method for the determination of residues of fluopicolide, fluopyram and spirotetramat in animal food by high-performance liquid chromatography tandem mass spectrometry. The sample was purified using the QuEChERS method, with 0.1% formic acid aqueous solution (containing 10 mmol ammonium acetate) and acetonitrile were used as mobile phases for gradient elution, separated by Poroshell 120 EC-C18 liquid-phase column, and the target substance was qualitatively and quantitatively analyzed by electrospray positive ion (ESI+) multi reaction monitoring mode. This method had good linearity in the linear range of 2~200 μg·L-1, and the correlation coefficients were>0.992, the detection limit of the method is 0.01 mg·kg-1, and the quantitative limit is 0.03 mg·kg-1. At the spiking levels of 0.03 mg·kg-1, 0.10 mg·kg-1, and 0.30 mg·kg-1, the recovery rate of the method is 80.3% to 94.3%, and the RSD is 4.3% to 8.7%. This method is easy to operate, has high detection efficiency, and has good separation effect of the target substance, which can meet the detection of residues of fluopicolide, fluopyram, and spirotetramat in animal food.Keywords: high performance liquid chromatography-tandem mass spectrometry (LC-MS/MS); animal food; fluopicolide; fluopyram; spirotetramat氟吡菌胺、氟吡菌酰胺、螺虫乙酯均属于广谱类杀菌剂。

世界气象组织氧化亚氮全球平均浓度

世界气象组织氧化亚氮全球平均浓度

世界气象组织氧化亚氮全球平均浓度氧化亚氮(N₂O)是一种重要的温室气体,它对全球气候变化和大气化学过程有着重要影响。

世界气象组织(WMO)对氧化亚氮的浓度进行了全球监测和研究,以了解它的变化趋势和对环境的影响。

首先,让我们了解一下什么是氧化亚氮。

氧化亚氮是一种由氮气和氧气反应所产生的化合物,化学式为N₂O。

它主要来自于农业、工业和燃烧过程中。

农业活动是氧化亚氮的主要源头,尤其是土壤肥料和畜牧业排放的氧化亚氮。

此外,氧化亚氮还由工业过程和燃烧排放产生,例如化肥生产、化学品生产和燃料燃烧等。

世界气象组织通过全球观测网络监测氧化亚氮的浓度和分布。

他们利用地面和航空观测站,以及卫星遥感数据,定期收集和分析氧化亚氮的浓度数据。

这些数据帮助我们了解氧化亚氮的分布和变化趋势,以及其对大气和气候系统的影响。

根据世界气象组织的数据,氧化亚氮的全球平均浓度在过去几十年里呈现出增长的趋势。

根据最新的报告,截至2021年,全球平均浓度约为331.1部分亿(ppb),这是一个相对较高的水平。

与20世纪早期相比,氧化亚氮的浓度已经增加了约20%。

氧化亚氮的增长主要是由人为活动导致的,尤其是农业和工业的活动。

不合理的施肥和过度养殖导致了农田和畜牧业排放的氧化亚氮增加。

此外,化肥和化学品生产以及燃料燃烧等工业活动也是氧化亚氮的重要来源。

氧化亚氮的增加对大气和气候系统有着重要的影响。

首先,它是一种温室气体,具有较高的全球增温潜能。

这意味着氧化亚氮的增加会导致地球温度的上升,加剧全球气候变化。

其次,氧化亚氮还参与了大气化学过程,影响臭氧的生成和分解等。

这对大气层的稳定和气候条件也有着重要影响。

为了减少氧化亚氮的排放和控制其浓度的增长,国际社会采取了一系列措施。

其中包括改善农田管理实践,减少不合理施肥和过度养殖的程度。

此外,监管工业过程和燃烧排放,采取更清洁和可持续的生产方式也是重要的举措。

这些努力可以减少氧化亚氮的排放,并为减轻气候变化和保护环境做出贡献。

液液萃取气相色谱法测定水中6种有机磷农药

液液萃取气相色谱法测定水中6种有机磷农药

分析检测液液萃取气相色谱法测定水中6种有机磷农药陈国清(莆田市环境监测站,福建莆田 351100)摘 要:本文采用液液萃取-气相色谱法检测水中敌敌畏、内吸磷、乐果、甲基对硫磷、马拉硫磷和对硫磷6种有机磷农药的含量。

实验以正己烷为萃取剂,对色谱条件进行优化。

实验结果显示,6种有机磷化合物在0.1~1.0 μg·mL-1线性关系良好,检出限为0.010~0.200 μg·L-1,相对标准偏差为1.54%~4.72%,加标回收率为76%~104%,本方法能满足水中有机磷农药检测的实际需要。

关键词:液液萃取-气相色谱法;有机磷农药;水质Determination of Six Organophosphorus Pesticides in Water by Liquid Liquid Extraction Gas ChromatographyCHEN Guoqing(Putian Environmental Monitoring Station, Putian 351100, China)Abstract: This article uses a liquid liquid extraction gas chromatography method to detect the content of six organophosphorus pesticides in water, including dichlorvos, phosphorus, dimethoate, methyl parathion, malathion, and parathion. The experiment used n-hexane as the extractant to optimize the chromatographic conditions. The experimental results showed that the six organic phosphorus compounds had a good linear relationship between 0.1 and 1.0 μg·mL-1, with a detection limit of 0.010 to 0.200 μg·L-1, a relative standard deviation of 1.54% to 4.72%, and a recovery rate of 76% to 104%. This method can meet the practical needs of detecting organic phosphorus pesticides in water.Keywords: liquid liquid extraction gas chromatography; organophosphorus pesticide; water quality有机磷农药的广泛使用会给人们的身心健康带来严重危害[1]。

NiagaraNetwork Discover方面的问题

NiagaraNetwork Discover方面的问题

关于NiagaraNetwork Discover方面的问题关键字:Discover问题描述我们在用Niagara Network的Discover功能时,有时会遇到一些问题,从而无法完成网络集成。

在Discover时通常会遇到以下问题:1)Discover搜不到某些Station。

2)完全搜不到任何Station,这可能是防火墙导致的。

Niagara Network通常使用IP通信,如果打开防火墙,外部发送到本地的链接请求会就会被阻挡,因此我们需要关闭防火墙。

如果您的防火墙无法关闭,或者您不希望完全关闭防火墙,那么您可以为您的Niagara Network通信打开一些特定的通信端口。

3)在JACE上的NiagaraNetwork进行 Discover时,立刻报错。

从Job日志里能看到如下错误:解决办法1)问题1,解决办法,手动添加Station:A.步骤1:在NiagaraNetwork的Station Manager 视图中,点击底部的New按钮,新建一个Station。

如下图所示,Name为您想要添加的station的名称(必须一样),Address为您想要添加的station所在PC的Niagara Network 通信的IP地址,Fox Port 设成4911,Use Foxs设成True,Credential Store中的Username和PassWord为您想添加的Station中的某个用户的账号和密码,保持其它属性的默认状态。

其它步骤请参考TCP培训Lab28()。

B.步骤二:Station添加完毕之后,会出现在Database中,右击Database当中的刚刚建的工作站,选择Actions,然后使用Ping强制建立一个连接。

注意,连接仅仅会保持短暂时间。

连接将会进入一个Fault状况,因为远端工作站所提供的TLS安全证书尚未获得批准。

以下是如何将其进行改正:i. 在发起Niagara Network连接的工作站上打开位于Platform下的Certificate Management。

液液萃取固相萃取——气相色谱法测定水中酞酸酯类化合物

液液萃取固相萃取——气相色谱法测定水中酞酸酯类化合物

第"1期李洁,等:液液萃取/固相萃取一一气相色谱法测定水中臥酸酯类化合物-95-液液萃取/固相萃取——气相色谱法测定水中T酸酯类化合物李洁,郭丽,张丹(河南省生态环境监测中心河南省环境监测技术重点实验室,河南郑州450000)摘要:采用液液萃取/固相萃取-气相色谱法测定水中6种猷酸酯类化合物,通过优化萃取条件发现,液液萃取时以10mL二氯甲烷作为萃取剂、在酸性条件下萃取效果较好,固相萃取时使用C18固相萃取柱、以8mL二氯甲烷作为洗脱剂、在pH为2的条件下萃取效果较好。

按照优化后的萃取条件进行实验,液液萃取空白水样的加标回收率为602%〜1182%,实际水样的加标回收率为62.8%~120%個相萃取空白水样的加标回收率为66.8%-120%,实际水样的加标回收率为66水%〜119%&关键词:猷酸酯类'液液萃取'固相萃取'气相色谱法中图分类号:X8302文献标识码:A文章编号:1008-021X(2020)21-0095-03Determioation of PAEs io water by SPE/LLE—GCLl Jl,Guo Ll,Zhang Dan(Henan Ecological Environment Monitoring Center,Zhengzhou450000,China)Abstract:six kinds oO PAEs in water were determined by gas chromatography with the liquid liquid extraction/solid phase exeaction in this research.The optimai conditions oO extraction were discussed.The results showed that the liquid-liquid exeaction elect was better when10mL dichloromethane was used as extractant under acidic conditions.The resuOs showed that the so—d phase extraction was better when using C18solid phase extraction column and8mL dichloromethane was used as eluent under pH =2.The experiment was carried out according to the optimized exeaction conditions.Ehe standard recoveo oO blank water sample is60.6%〜118.4%and the standard recoverg oO actual water sample is622%〜120%by LLE.Ehe standard recoveo oO blank water sample is664%〜120%and the standard recoveo of actual water sample is664%〜119%by SPE.Key words:PAEs;LLE;SPE;GC駄酸酯(phm/Ogcide—er,PAEs)也称邻苯二甲酸酯,是邻苯二甲酸酹与醇的反应产物,1-&由于PAEs并未聚合到高分子碳链上而是与塑料基质以氢键或范德华力结合,因此在使用过程中遇水或有机溶剂时极易被释放,造成对环境的污染同时,它也是一类环境激素类物质,对动物具有雌激素的特征及抗雄激素生物效应,临床上表现为生殖能力下降、生殖器官畸形和发育异常等,严重影响人们的身体健康,美国环境保护署将邻苯二甲酸二甲酯(dimethylphthaOtc,DMP)、邻苯二甲酸二乙酯(dimhy0hm/Oe,DEP)、邻苯二甲酸二丁酯(dibumOhm//e,DBP)、邻苯二甲酸二.(2-乙基己基)酯(di-(2-ethyOexyl)-phthalate,DEHP)、邻苯二甲酸二辛酯(diemOhm//e,DOP)、邻苯二甲酸丁基%基酯(bumlPenzylphthaOm,BBP)6种PAEs列入优先污染物监测名单,3一6-&目前,国内外关于PAEs预富集方法的报道有液-液萃取(LLE)、固相萃取(SPE)、固相微萃取(SPME)%液相微萃取(LPME)等[7—!]。

honeywell webs 调试手册

honeywell  webs 调试手册

14
WEBs AX Overview V1.0
Compact I/O
• Compact I/O
OS Number XIO-10DI XIO-4DI XIO-4DO XIO-8AI Applications 10 DI 4 Dl 4 DO 8 AI 4 20K NTC Inputs
- LonMark compliant / LonMark - LON FTT10 interface / LON FTT10 - Compact design /
13 WEBs AX Overview V1.0
Spyder I/O Spyder
• Spyder I/O – PUL6438
• I/O 6 Universal Inputs 4 Digital Input 3 Analog Output 8 Digital Output
•Uses the LonWorks network protocol • Programming Tool — WEBs StationAX
4
WEBs AX Overview V1.0
Niagara Framework
Administration Finance Security Energy
MODBUS
Lighting
XML SQL HTTP HTML ODBC SNMP JDBC FTP
Facility/Plant Management
12
WEBs AX Overview V1.0
IO-34-H
• Max of (1) per controller • May add up to (2) additional IO-16-H • If used with IO-16-H’s it must be mounted at the end of the chain • Dedicated 24 Volt transformer - Can power WEB-201/WEB-600 controller
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
相关文档
最新文档