顽石皮带-278B-E611-005-4[1DW0006J]
Light Vision 清晰视界系列眼镜说明书
Light Vision ™11356-00000-10Clear AF Lens, Grey Frame,Dual LED LightsSolus ™ 1000S1101SGAFClear Scotchgard ™ AF Lens,Blue/Black Frame S1102SGAFGrey Scotchgard ™ AF Lens,Blue/Black Frame S1103SGAFAmber Scotchgard ™ AF Lens,Blue/Black Frame S1107SGAF Indoor/Outdoor Grey Scotchgard ™ AF LensBlue/Black Frame S1101SGAF-KTClear Scotchgard ™ AF Lens,Blue/Black Frame, Foam Gasket and StrapS1102SGAF-KTGrey Scotchgard ™ AF Lens,Blue/Black Frame, Foam Gasket and StrapS1107SGAF-KTIndoor/Outdoor Grey Scotchgard ™AF Lens, Blue/Black Frame, Foam Gasket and StrapS1201SGAFClear Scotchgard ™ AF Lens,Green/Black FrameS1202SGAFGrey Scotchgard ™ AF Lens,Green/Black FrameS1203SGAFAmber Scotchgard ™ AF Lens,Green/Black FrameS1207SGAF Indoor/Outdoor Grey Scotchgard ™ AF LensGreen/Black Frame S1201SGAF-KTClear Scotchgard ™ AF Lens,Green/Black Frame, Foam Gasket and StrapS1202SGAF-KTGrey Scotchgard ™ AF Lens,Green/Black Frame, Foam Gasket and Strap S1201SGAF-SKTClear Scotchgard ™ AF Lens, Green/Black Frame, Foam Gasket and Strap (temples not included)S1202SGAF-SKTGrey Scotchgard ™ AF Lens, Green/Black Frame, Foam Gasket and Strap (temples not included)S1207SGAF-SKTIndoor/Outdoor Grey Scotchgard ™ AF Lens, Green/Black Frame, Foam Gasketand Strap (temples not included)Solus-foamSolus Accessories Foam GasketSolus-strapSolus Accessories StrapSmart Lens ™13407-00000-5Photochromic Lens, Black FramePREMIUM PROTECTIVE EYEWEARThese eye or face protection products help provide limited eye and face protection. Misuse or failure to follow warning and instruction may result in serious potential injury, including blindness or death. For proper use, selection, and applications against flying particles, optical radiation and/or splash, see supervisor, read User Instructions and warning on the package or call 3M PSD Technical Service in the USA at 1-800-243-4630. In Canada, call 1-800-267-4414.WARNING!3Personal Safety Division 3M CenterBuilding 235-2W-70St. Paul, MN 55144-1000For more information:In U.S.Technical Assistance 1-800-243-4630 Customer Care Center 1-800-328-1667/WorkerSafety In CanadaTechnical Assistance 1-800-267-4414 Customer Care 1-800-364-35773M.ca/Safety3M PSD products are occupational use only.3M and all other trademarks used herein are trademarks of 3M Company, used under license in Canada. Please recycle. Printed in U.S.A. © 3M 2018. All rights reserved. 70-0715-6919-1Rev. 01/201811476-00000-10Clear AF Lens, Grey Frame,Dual LED LightsLight Vision ™ 2Fuel ™11640-00000-10Red Mirror Lens, Metallic Sand Frame11641-00000-20Blue Mirror Lens, Silver Frame11664-00000-10Blue HC Mirror Lens, White Frame11650-0000-10Red Mirror Lens, Metallic Sand Frame11654-00000-10Grey AF Lens, Black Rubberized FrameSecureFit ™ 600Safety SunwearSS1330AS-GYellow Mirror AS Lens, Grey FrameSS1428AS-SBlue Mirror AS Lens, Silver Alum FrameSS1502AF-BGrey AF Lens, Black Frame w/GasketSS1502AF-WGrey AF Lens, White Frame w/GasketSS1514AS-SSilver Mirror AS Lens, Silver Black Frame w/GasketSS1511AF-BGrey Polarize AF Lens, Black Frame w/GasketSS1514AS-BSilver Mirror AS Lens, Black/Grey Frame w/GasketSS1629AS-BRed Mirror AS Lens, Black FrameSF601SGAFClear Scotchgard ™ AF LensSF601SGAF-FMClear Scotchgard ™ AF Lens, Foam GasketSF602SGAFGrey Scotchgard ™ AF LensSF602SGAF-FMGrey Scotchgard ™ AF Lens, Foam GasketSF603SGAFAmber Scotchgard ™ AF LensSF607SGAFIndoor/Outdoor Grey Scotchgard ™ AF LensSF601RASClear Rugged Anti-Scratch LensSF602RASGrey Rugged Anti-Scratch LensSF617ASLow IR R1.7, AS LensSF630ASShade W3.0, AS LensSF650AS W5, AS Lens SF611ASPolarized, AS LensSF613ASPhotochromic, AS LensLight Vision ™ OTG11489-00000-10Clear AF Lens, Dual LED Lights, OTG16617-00000-10Clear Lens, Black Frame w/Strap, Medium16618-00000-10Clear Lens, Black Frame w/Strap, LargeLexa ™Dust GoggleGear™Lexa ™ Splash GoggleGear ™16644-00000-10 Clear Lens, Medium, D3 D416645-00000-10 Clear Lens, Large, D3 D416400-00000-10Clear Lens, Elastic Strap, Medium16408-00000-10Clear Lens, Black Adjustable Temple,Medium16412-00000-10Clear Lens, Elastic Strap, Large16420-00000-10Clear Lens, Black Adjustable Temple,LargeFectoggles ™40300-00000-10Clear Lens, Impact Goggle40301-00000-10Clear AF Lens, Impact Goggle40304-00000-10Clear Lens, Splash Goggle, D3 D440305-00000-10Clear AF Lens, Splash Goggle, D3 D4Centurion ™Maxim ™ 2x2 Goggle40686-00000-10Clear Lens, Black Frame w/Strap, Temples40687-00000-10Grey Lens, Black Frame w/Strap, Temples40696-00000-10Clear Lens, Black Frame, Side Venting40698-00000Clear AF Lens, Black Strap, Air Flow Goggle40699-00000Grey AF Lens, Black Strap, Air Flow Goggle332 Impact Goggle40650-00000-10Clear Lens 40651-00000-10 Clear AF Lens334 Splash Goggle40660-00000-10 Clear Lens, D3 D440661-00000-10 Clear AF Lens, D3 D4GoggleGear ™ 500GG501SGAFClear Scotchgard ™ AF Lens, D3 D4,Cloth Strap GG501NSGAFClear Scotchgard ™ AF Lens, D3 D4,Neoprene Strap GG500-PI Prescription InsertGG500-NeoStrapReplacementNeoprene Strap GG500-ClthStrap Replacement Cloth StrapSAFETY GOGGLESACCESSORIESMaxim ™ Splash GoggleModul-R ™40671-00000-10Clear AF Lens, O-T-G, D3 D440658-00000-10Clear AF Lens, Chin ProtectorThe Complete Line of Protective Eyewear Products11215-00000-20 Grey AF Lens, Black Frame11216-00000-20I/O Mirror Lens, Black FrameMoon Dawg ™11532-10000-20Clear AF Lens, Blue Frame11554-00000-20Clear AF Lens, Bronze Frame11555-00000-20Bronze AF Lens, Bronze Frame11556-00000-20Blue Mirror HC Lens, Bronze FrameMetaliks ™ GTHIE6 Protective EyewearAttaches directly to 3M ™ Hard Hat SuspensionHIE601AF - Clear AF Lens HIE602AF - Amber AF Lens HIE603AF - Grey AF Lens3M ™ Protective Eyewear Slip-On Side Shields23451-00030-20 ClearReplacement Foam GasketSF-FOAM (SF400)SF600FI (SF600)GoggleGear ™ 2890 SeriesGG2891-SGAFClear Scotchgard ™ AF Lens,Indirect Vent3M ™ Lens Cleaner83803-00000Lens Cleaning Fluid 83745-00000Lens Cleaning T owelettesQX Privo 12261-00000-20Clear AF Lens, Black/Orange Frame12262-00000-20Grey AF Lens, Black/Orange Frame12263-00000-20Amber AF Lens, Black/Orange Frame12264-00000-20I/O Mirror Lens, Black/Orange Frame12265-00000-20Clear AF Lens, Silver/Red Frame12266-00000-20SF401SGAF-REDClear Scotchgard Anti-Fog LensRed/Gray Frame SF401SGAF-BLUClear Scotchgard Anti-Fog LensBlue/Gray Frame SF401SGAF-BLU-FClear Scotchgard Anti-Fog Lens with FoamGasket, Blue/Gray Frame SF402SGAF-BLU12100-10000-20 Clear Lens, Black Temple12101-10000-20Grey Lens, Black Temple 12109-10000-20Clear Lens, Black Temple, Soft Nose12110-10000-20Grey Lens, Black Temple, Soft Nose12115-10000-20Clear Lens, Black Sport Grip Temple, Soft Nose12180-10000-2011380-00000-20 Clear AF Lens, Silver Frame11381-00000-20Grey AF Lens, Silver Frame11471-00000-20Clear AF Lens, Blue Frame11472-00000-20I/O Mirror Lens, Blue Frame11523-00000-20Light Blue AF Lens, Blue Frame11477-00000-10Clear AF Lens, Grey Frame, +1.5 Diopter11478-00000-10Clear AF Lens, Grey Frame, +2.0 Diopter11479-00000-10Clear AF Lens, Grey Frame, +2.5 Diopter11374-00000-20Clear Lens, Silver Frame, +1.5 Diopter11375-00000-20Clear Lens, Silver Frame, +2.0 Diopter11376-00000-20Clear Lens, Silver Frame, +2.5 Diopter11377-00000-20Grey Lens, Silver Frame, +1.5 Diopter11378-00000-2011457-00000-10Clear AF Lens, Silver Frame, Dual +1.5 Diopter11458-00000-10Clear AF Lens, Silver Frame, Dual +2.0 Diopter11459-00000-10Clear AF Lens, Silver Frame, Dual +2.5 DiopterBX ReadersMetaliks Sport11343-10000-20Clear AF Lens, Brushed Nickel Frame11344-10000-20Grey AF Lens, Brushed Nickel Frame11345-10000-20I/O Mirror HC Lens, Brushed Nickel Frame11540-10000-20Blue Mirror HC Lens, Brushed Nickel FrameLexa ™15100-00000-20Clear AF Lens, Black Temple, Large15200-00000-20Clear AF Lens, Black Temple, Medium15154-00000-100Clear AF Lens, Black Temple, Large15204-00000-20Grey AF Lens, Black Temple, Medium15152-00000-100Clear AF Lens, Black Temple, Medium14246-00000-20Clear AF Lens, Metallic Grey/Black Frame14247-00000-20Grey AF Lens, Metallic Grey/Black Frame14248-00000-20 I/O Mirror Lens, Metallic Grey/Black FrameSF401AF Clear AF Lens SF402AF Grey AF Lens SF410ASIndoor/Outdoor Mirror LensSF401AF-FM Clear AF Lens, Foam SF402AF-FM Grey AF Lens, Foam SF410AS-FMSecureFit 400OX。
戴尔航空制造业（Durabilt Industries）HCI2系列拨弯槽车辆配件清单说明书
3
220172 3/8” RAKE WHEEL ATTACHMENT LOCK WASHER
6
220089 10mm RAKE WHEEL ATTACHMENT NUT
4
220071 3/8” RAKE WHEEL ATTACHMENT NUT
6
5
300213 RAKE WHEEL COMPLETE RH
300166 RAKE WHEEL COMPLETE LH
6
300492 RAKE WHEEL TINE
7
300412 RAKE WHEEL TINE CLAMP
220249 RAKE WHEEL TINE CLAMP BOLT
220089 RAKE WHEEL TINE CLAMP NUT
5
2,3,4
6
POSITION 1 2
3
PART NUMBER 300649
300486 600161
600347 600162 600163
600348 600164 612418 612419 612420 612421 612401 612402
DESCRIPTION
FRONT WHEEL ARM RETAINING PIN FRONT WHEEL ARM RETAINING PIN RETAINER CLIP
4
4
300659 PIVOT PIN O’RINGS
4
5
220273 PIVOT PIN RETAINING BOLT
2
6
220096 PIVOT PIN RETAINING NUT
2
7
612304 INNER WING ANGLE STRUT
Osprey ATMOS AURA AG LT系列 S22 用户手册说明书
用户手册ATMOS | AURA AG LT 系列欢迎光临Osprey 。
我们专为您的探险之旅打造最具实用性、耐久性和创新性的携带产品，并以此为豪。
请参阅本用户手册，了解产品功能、使用、保养、客户服务和保修方面的信息。
ATMOS AG LT 50ATMOS AG LT 65AURA AG LT 50AURA AG LT 65• bluesign ® 认证主体面料• GRS-认证再生主体材料• 不含PFC/PFAS 的DWR 涂层23主体面料 bluesign ® 认证再生210D 尼龙蜂窝纹理，不含PFC/PFAS 的DWR 涂层装饰 b luesign ® 认证再生210D 高强力尼龙，不含PFC/PFAS 的DWR 涂层底部 b luesign ® 认证再生500D 高强力 尼龙，不含PFC/PFAS 的DWR 涂层通用1 内含防水罩 a采用不含PFC/PFAS 的DWR 涂层和bluesign ®认证材料2 两侧面板均设有弧形拉链开口3 活动顶盖，配多个绑扎点4 前部shove-it 快速取放口袋，采用强化面料5 侧面双开式大水壶袋6 上/下侧双压缩带7 双拉链式腰带口袋8 双重冰镐挂环，上侧压缩带挂钩9 可移除式睡垫固定带10内部储水仓，后部中央出水口产品承诺化繁为简的Atmos | Aura AG LT ，以流线型的轮廓为技术型背包客提供贴合身体的AntiGravity 悬挂系统。
这款背包比原有同类产品更轻，同时集合了多项简单贴心的功能。
AntiGravity 悬挂系统——连续的轻质网眼背板——将舒适性作为头等重要的体验。
ATMOS AG LT 65男款规格 S/M L/XL 立方英寸 3967 4150 升 65 68磅 4.07 4.25公斤 1.85 1.93 英寸33 h x 15 w x 13 d 35 h x 15 w x 13 d 厘米83 h x 39 w x 32 d 90 h x 39 w x 32 d 负载范围30-40磅 | 14-18公斤30-40磅 | 14-18公斤包含防雨罩防雨罩附加配件3L储水器3L储水器ATMOS AG LT 50男款规格 S/M L/XL 立方英寸 3051 3234 升 50 53磅 4 4.18公斤 1.82 1.9英寸33 h x 14 w x 12 d 35 h x 14 w x 12 d 厘米83 h x 35 w x 30 d 88 h x 35 w x 30 d 负载范围25-35磅| 11-15公斤25-35磅| 11-15公斤包含防雨罩防雨罩附加配件 3L储水器3L储水器AURA AG LT 65女款规格 WXS/S WM/L 立方英寸 3845 3967 升 63 65磅 3.84 4.01公斤 1.74 1.82 英寸31 h x 16 w x 12 d 33 h x 16 w x 12 d 厘米78 h x 40 w x 32 d 83 h x 40 w x 32 d 负载范围 30-40磅 | 14-18公斤30-40磅 | 14-18公斤包含防雨罩防雨罩附加配件 3L储水器3L储水器AURA AG LT 50女款规格 WXS/S WM/L立方英寸 2929 3051 升 48 50磅 3.79 3.97公斤 1.72 1.8英寸30 h x 14 w x 12 d 32 h x 14 w x 12 d 厘米75h x 35w x 30d 80 h x 35 w x 30 d 负载范围 25-35磅| 11-15公斤25-35磅| 11-15公斤包含防雨罩防雨罩附加配件 3L储水器3L储水器背负系统ANTI-GRAVITY 悬挂系统+4 mm 粉末涂层沿周框架ANTI-GRAVITY 背板+ 注塑成型的梯形主干调整系统，易于取物和操作+ 双色三明治网布增加强度+腰部区域带有防滑硅胶印，有利于传递负荷并增加舒适性ANTI-GRAVITY 背带+下侧采用冲切泡沫材料，上侧采用网眼ExoForm 包覆ANTI-GRAVITY 腰带+ 革命性AG 系统将拉紧的背板无缝延伸至腰带+ 腰带覆盖层与框架融为一体，确保一致性负载转移+ 可延展的量身调适Fit-on-the-Fly 腰带，精确贴合不同腰围+ 渐进式长度和角度调节，通过微调实现贴合+斜挎式ErgoPull 设计，拉紧腰带后即可让腰部承重负载调节带胸带LIGHTWIRE 框架ERGOPULL 腰带梯扣背带实现主干调节量身调适FIT-ON-THE-FLY ®腰带主干长度调节指引尺寸/贴合度ATMOS AG LT - 男款尺寸S/M 17-20.5英寸 / 43-52厘米L/XL19.5-23英寸 / 49-58.9厘米AURA AG - 女款尺寸WXS/S 13.5-17英寸 / 34-43厘米WM/L 16-19.5英寸 / 40.5-49厘米如何测量背包的背部尺寸女款专有设计+ 肩部、背板、腰椎和腰带部位独特的悬挂式网眼布可贴合各种体型和尺寸，带来舒适的背负体验。
固定式带式输送机(托辊)选用手册(B500-2200)
托辊设计选用手册
（仅 供 参 考）
山东山矿机械有限公司
编制说明
随着改革开放的深入，电力、煤炭、冶金等行业的高速发展，急需带式输送机也向着大 型、长距离、高带速、大功率、大运量的方向发展，DT75 型、DTII 型带式输送机由于其局 限性已越来越不能满足发展需要，托辊种类规格的不足更为明显。公司决定开发设计带宽 1600mm、1800mm、2000mm、2200mm 的托辊，尽快编制托辊设计选用手册来适应目前经 济形势发展需要。
第三部分 JKII 型带式输送机托辊
1 托辊 ……………………………………………………………………………35
1.1 槽形托辊（35°） …………………………………………………………………………35 1.2 槽形托辊（45° ） …………………………………………………………………………36 1.3 槽形前倾托辊（35°） ……………………………………………………………………37 1.4 过渡托辊（10°） …………………………………………………………………………38 1.5 过渡托辊（20°） …………………………………………………………………………39 1.6 过渡托辊（30°） …………………………………………………………………………40 1.7 缓冲托辊（35°） …………………………………………………………………………41 1.8 缓冲托辊（45°） …………………………………………………………………………42 1.9 摩擦上调心托辊 …………………………………………………………………………43 1.10 锥形上调心托辊 …………………………………………………………………………44 1.11 摩擦上平调心托辊 ……………………………………………………………………44 1.12 平行上托辊 ………………………………………………………………………………45 1.13 平行上托辊 （2 节） ……………………………………………………………………46 1.14 平行下托辊 ………………………………………………………………………………47 1.15 平行下托辊 （2 节）………………………………………………………………………48 1.16 V 形托辊 …………………………………………………………………………………49 1.17 V 形前倾托辊 ……………………………………………………………………………50 1.18 平行梳形托辊 ……………………………………………………………………………51
toyota机器参数表
一、发动机匹配表发动机型号匹配车型匹配年款5S-FE Camry 1993-1999Celica 1993-19993VZ-FE Camry 1993ES300 19934A-FE Celica 1993Corolla 1993-19973S-GTE Celica 19937A-FE Corolla 1993-1997Celica 1994-19971FZ-FE Land Cruiser 1993-1997 LX470 1996-19972TZ-FE Previa 1993-19951MZ-FE Camry 1994-1999Avalon 1995-1999ES300 1994-1991ZZ-FE Corolla 1998-19992UZ-FE Land Cruiser 1998-1999LX470 1998-19992JZ-GE GS300 1993-1999SC300 1993-19991UZ-FE LS400 1993-1999 SC400 1993-1999 GS400 1998-1999二、发动机参数1．5S-FE、3VZ-FE、4A-FE、7A-FE型发动机参数表发动机型号项目 5S-FE 3VZ-FE 4A-FE 7A-FE最大功率（Hp/r•Min-1） 135/5400 185/5200 115/5600 115/560最大扭矩（Ft•Lbs/r•Min-1） 145/4400 195/4400 115/2800 115/280缸径×行程87.1×90.9 87.4×82.0 81×77 81×85.5汽缸排量（L） 2.2 3.0 1.6 1.8压缩比 9.5：1 9.6：1 9.5：1 9.5：1点火次序点火提前角（°）汽缸压缩压力（kPa）汽缸缸径 1 87.000-87.010 87.500-87.510 81.001-81.010 81.001-81.0102 87.010-87.020 87.510-87.520 81.010-81.020 81.010-81.0203 87.020-87.030 87.520-87.530 81.020-81.030 81.020 81.030主轴承孔内径 1 59.020-59.026 68.010-68.0162 59.026-59.032 68.016-68.0223 59.032-59.038 68.022-68.028汽缸最大失圆度和锥度 0.101 0.101汽缸最大平面翘度 0.05 0.05 0.05 0.05汽缸盖最大翘曲度汽缸体面 0.05 0.099 0.05 0.05进排气歧管面 0.08 0.099 0.10 0.10气门座宽度进气门 0.99-1.40 0.99-1.40 1.0-1.4 1.0-1.4排气门 0.99-1.40 0.99-1.40 1.0-1.4 1.0-1.4气门座锥角（°） 45 45 45 45气门导管汽缸盖孔内径进气门（1） 11.000-11.027 11.026（许用极限） 11.026（许用极限）排气门 11.000-11.027 11.026（许用极限） 11.026（许用极限）气门导管内径 6.010-6.030 6.010-6.030 6.010-6.029 6.010-6.029气门杆到导管油隙进气门标准值 0.025-0.060 0.025-0.060 0.025-0.061 0.025-0.061许用极限 0.080 0.080 0.08 0.08排气门标准值 0.030-0.065 0.030-0.065 0.030-0.066 0.030-0.066许用极限 0.099 0.099 0.10 0.10气门锥角（°） 44.5 44.5 45 45气门边缘厚度（极限值）进气门 0.50 0.50 0.50 0.50排气门 0.50 0.50 0.50 0.50气门整修长度进气门（使用极限） 97.10 94.60 86.95 86.95排气门（使用极限） 98.00 94.40 87.35 87.35气门杆直径进气门 5.970-5.985 5.970-5.985 5.969-5.985 5.969-5.985 排气门 5.965-5.980 5.965-5.980 5.96-5.98气门间隙进气门 0.19-0.28 0.13-0.23 0.15-0.25 0.15-0.25排气门 0.28-0.38 0.27-0.37 0.25-0.35 0.25-0.35气门弹簧自由长度 41.96-41.99 41.40 38.57 38.57负载长度 16.7-19.5kg/34.70 17.2-19.1kg/33.30 16.9kg/31.7（气门关闭） 16.9kg/31.7（气门关闭）不垂直度 2.00 2.00 2.0 2.0进气凸轮轴轴向间隙（2）标准值 0.046-0.099许用极限 0.120排气凸轮轴轴向间隙（2）标准值 0.030-0.085 0.035-0.090 0.035-0.090许用极限 0.099 0.10 0.10凸轮轴轴向间隙（3）标准值 0.033-0.080许用极限 0.120齿轮背隙标准值 0.020-0.200 0.020-0.200许用极限 0.300 0.300 0.30 0.30凸轮轴轴颈直径 26.959-26.975 26.949-26.965 24.949-24.965（排气凸轮轴1号轴径）22.949-22.965（其它轴径） 24.949-24.965（排气凸轴1号轴径）22.949-22.965（其它轴径）凸轮轴最大径向圆跳动 0.040 0.060凸轮轴轴颈油隙标准值 0.025-0.062 0.035-0.072 0.03 0.072 0.035-0.072使用极限 0.099 0.099 0.10 0.10凸轮轴凸高度进气标准值 42.010-42.110 42.160-42.260 41.910-42.010 41.910-42.010使用极限 41.900 42.010 41.50 41.50排气标准值 40.060-40.160 41.960-42.060 41.960-42.060 41.960-42.060 使用极限 39.950 41.810 41.55 41.55挺杆孔直径 31.000-31.018 31.000-31.018 31.000-31.025 31.00 31.025挺杆直径 30.966-30.976 30.966-30.976 30.966-30.976 30.966-30.976挺杆油隙标准值 0.024-0.052 0.020-0.052 0.024-0.059 0.024-0.059 许用极限 0.070 0.080 0.07 0.07曲轴轴向间隙标准值 0.020-0.220 0.020-0.220 0.020-0.221 0.020-0.221使用极限 0.300 0.300 0.300 0.300曲轴径向圆跳动 0.060 0.060 0.050 0.050主轴承轴颈直径 0 54.998-55.003 63.996-64.000 47.99 48.000 47.994-48.000 1 54.993-54.998 63.990-63.996 47.988-47.994 47.988-47.9942 54.988-54.993 63.986-63.990 47.982-47.988 47.982-47.988主轴径失圆度 0.020 0.020 0.020 0.020主轴径锥度 0.020 0.020 0.005 0.005主轴承油隙（3号轴径）标准曲轴标准值 0.025-0.044 0.028-0.056 0.015-0.033 0.015-0.033许用极限 0.080 0.080加大0.25 标准值 0.027-0.067 0.028-0.080许用极限 0.080 0.080主轴承油隙（除3号轴径）标准曲轴标准值 0.015-0.034 0.028-0.056 0.015-0.033 0.015-0.033许用极限 0.080 0.080加大0.25 标准值 0.019-0.059 0.028-0.080许用极限 0.080 0.080主轴承厚度（3号主轴承）1 1.9920-1.9950 1.989-1.9922 1.9950-1.9980 1.992-1.9953 1.9980-2.0010 1.995-1.9984 2.0010-2.0040 1.998-2.0015 2.0040-2.0070 2.001-2.004主轴承厚度（其它主轴承） 1 1.9970-2.0000 1.989-1.9922 2.0000-2.0030 1.992-1.9953 2.0030-2.0060 1.995-1.9984 2.0060-2.0090 1.998-2.0015 2.0090-2.0120 2.001-2.004连杆轴承厚度 1 1.484-1.488 1.484-1.488 1.486-1.490 1.486-1.4902 1.488-1.492 1.488-1.492 1.490-1.494 1.490-1.4943 1.492-1.496 1.492-1.496 1.494-1.498 1.494-1.498连杆轴承轴颈直径 51.985-52.000 54.986-55.000 39.985-39.999 47.985-48.000连杆轴承失圆度和锥度 0.020 0.020 0.005 0.005连杆轴承油隙标准曲轴标准值 0.024-0.055 0.028-0.065 0.020-0.051 0.020-0.051许用极限 0.080 0.080 0.078 0.078加大0.25 标准值 0.023-0.069 0.028-0.080许用极限 0.080 0.080连杆孔直径（小头销孔） 22.005-22.017 22.005-22.014连杆最大弯曲度 0.05/100.1 0.05/100.1 0.05/100.1 0.05/100.1连杆最大扭曲度 0.150/100.1 0.150/100.1 0.05/100.1 0.05/100.19连杆侧隙标准值 0.160-0.312 0.150-0.330 0.015-0.250 0.015-0.250许用极限 0.350 0.38 0.300 0.300活塞与汽缸间隙标准值 0.140-0.160 0.130-0.150 0.08 0.105 0.085-0.105许用极限 0.180 0.170 0.13 0.13活塞直径 1 86.850-86.860 87.360-87.370 80.905-80.915 80.905-80.9152 86.860-86.870 87.370-87.380 80.915-80.925 80.915-80.9253 86.870-86.880 87.380-87.390 80.925-80.935 80.925-80.935活塞销直径 21.997-22.009 21.997-22.006连杆配合标准值 0.005-0.011 0.005-0.010使用极限 0.050 0.050活塞环侧隙第一道气环 0.040-0.080 0.010-0.080 0.045-0.090 0.045-0.090第二道气环 0.030-0.070 0.030-0.070 0.030-0.071 0.030-0.071活塞环开口间隙第一道气环标准值 0.270-0.500 0.280-0.500 0.25 0.45 0.25-0.45使用极限 1.100 1.100 1.07 1.07第二道气环标准值 0.350-0.600 0.380-0.600 0.35-0.50 0.35-0.50使用极限 1.200 1.200 1.20 1.20油环标准值 0.200-0.550 0.150-0.570 0.15-0.45 0.15-0.45使用极限 1.150 1.170 1.05 1.05机油泵外转子与泵壳间隙标准值 0.099-0.160 0.099-0.175 0.080-0.180 0.080-0.180使用极限 0.200 0.300转子顶隙标准值 0.040-0.160 0.110-0.240 0.025-0.085 0.025-0.085使用极限 0.200 0.350 0.35 0.35转子侧隙标准值 0.030-0.090 0.025-0.085 0.025-0.085使用极限 0.150注：（1）气门导管汽缸盖孔内径进气门 Camry 标准气门导管 11.000-11.027加大气门导管 11.050-11.077Celica 标准气门导管 10.985-11.012加大气门导管 11.035-11.062排气门 Camry 标准气门导管 11.000-11.027加大气门导管 11.050-11.077Celica 标准气门导管 10.985-11.012加大气门导管 11.035-11.062（2）对于双凸轮轴。
Bosch 潮流电子洗衣机说明书
min 33" (84 cm) max 43" (110 mm) min 33" (84 cm) max 43" (110 mm)
Accessories: To purchase Bosch accessories, cleaners & parts please visit /us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).
22 9/16''
Required cutout size (HxWxD) (in)
32 1/8'' x 24'' x 24''
Adjustable feet
Yes
Net weight (lbs)
86 lbs
Accessories—Optional
Junction Box
SMZPCJB1UC
Dishwasher Softener Salt (4.4 lbs)
Always use the approved drain hose extension kit (SGZ1010UC).
Ensure a portion of the drain hose is raised between min. 33" (84 cm) and max. 43" (110 cm) above the cabinet floor.
2 1/2" (63.5 mm)
3-prong power cord
included
Example of an Electrical Receptacle Installation
东芝泰格 B-EX4T1 条码印表机用户手册说明书
• 我們預防性的維修服務會執行定期檢查以及其他保持機器品質和性能所需的工作。
如需詳細資訊，請諮詢授權的東芝泰格代理。
• 請勿將機器暴露於殺蟲劑或其他揮發性溶劑中。這樣做可能導致機殼或其他部件劣化，並可能導致油漆剝落。
(2)
安全概要
中文版本
目錄
頁碼
1. 產品概述 ..................................................................... E1- 1
每個符號的意義
此符號表示警告專案（包括注意事項）。 具體警告內容在 符號內畫出。 （左側的符號表示一般的提醒注意。）
此符號表示禁止的操作（禁止的專案）。 具體禁止的內容在 符號內或附近畫出。 （左側的符號表示“不准拆卸”。）
此符號表示必須執行的操作。 具體說明在符號內或附近畫出。 （左側的符號表示“從插座斷開電源線插頭”。）
1.5.1 尺寸 ................................................................... E1- 3 1.5.2 前視圖 ................................................................. E1- 3 1.5.3 後視圖 ................................................................. E1- 3 1.5.4 操作面板 ............................................................... E1- 4 1.5.5 內部構造 ............................................................... E1- 4 1.6 選購件 ................................................................... E1- 5
高性能多产品校准器5560A的技术数据说明书
Technical data5560A High-Performance Multi-Product Calibrator 5550A Performance Multi-Product Calibrator 5540A Multi-Product CalibratorMost comprehensive workload coverage, latest technology, intuitive redesigned front panel,MET/CAL compatibility and much more5560A: The most comprehensive workload coverageThe 5560A calibrates the most popular benchtop 6.5-digit multimeters with better than 4:1 test uncertainty ratio (TUR), and clamp meters to 1500 A.Technical improvements include 30 A continuous current output with no duty cycle and synthesized inductancefunctionality. These improvements enable you to calibrate modern and full-functional benchtop multimeters and clamp meters. A large variety of thermocouple types and a new thermocouple connector enables easier connection and broadens the temperature workload coverage. The workload is expanded even further when the 5560A is used with a 52120A amplifier and appropriate coil to increase the current output to 6000 A, for calibrating high-current devices such as Rogowski coils.5560A: The next generation high-performing calibrator supporting the widest workload coverageThe 5560A Calibrator defi nes a newclass of high-performance multi-product calibrator, providing the broadest electrical workload coverage andhighest accuracy for calibrating the most demanding modern workloads.5550A: Optimized for your multimeter workloadThe 5550A Performance Multi-Product Calibrator enhances the 5522A with new calibration ranges optimized to better match your existing digital multimeter workload in a modern, ruggedized instrument with intuitive graphical interface.5540A: Better performance for on-site or mobile calibrationThe 5540A Multi-Product Calibratorextends the capabilities of the 5502A with better performance suited for on-site or mobile calibration.5550A: Optimized for your multimeter workloadThe 5550A Performance Multi-Product Calibrator enhances the 5522A Multi-Product Calibrator with new calibration ranges optimized to better match your existing digital multimeterworkload in a modern, ruggedized instrument with an intuitive graphical interface.It calibrates the most popular benchtop digital multimeters with improved test uncertainty ratios (TURs), and clamp meters to 1000 A with continuous current output.Technical improvements include 30 A continuous current output, which reduces wait time during heavy usage. A range redesign enables you to calibrate your existing benchtop multimeters with greater confidence. A larger variety of thermocouple types and a new thermocouple connector enables easier connection and broadens the temperature workload coverage. The workload is expanded even further when the 5550A is used with a 52120A amplifier to increase the current output to 6000 A, for calibrating high-current components such as Rogowski coils.5540A: Better performance for on-site or mobile calibrationThe 5540A Multi-Product Calibrator extends the capabilities of the 5502A Multi-Product Calibrator with better performance suited for on-site or mobile calibration, covering many of the most demanding field instrumentation workloads. It calibrates the most popular handheld digital multimeters with increased test uncertainty ratios (TURs) and clamp meters to 1500 A with continuous current output.Technical improvements include a current range increase from 20 A to 30 A of continuous current output, which reduces wait time during heavy usage. A range redesign enables you tocalibrate your existing handheld digital multimeters with greater confidence. A larger variety of thermocouple types and a new thermocouple connector enables easier connection and broadens the temperature workload coverage. The workload is expanded even further when the 5540A is used with the 52120A amplifier to increase the current output to 6000 A, for calibrating high-current components such as Rogowski coils.The 5560A provides the broadest workload coverage, including most 6.5-digit multimeters.The 5550A calibrates the most popular 5.5-digit desktop multimeters.The 5540A calibrator offers better performance suited for on-site or mobile calibrationMatch your setup to your applicationA variety of options and accessories lets you match your setup to your applications. An optional portability kit makes the 5560A, 5550A or 5540A an excellent fit for on-site or mobile calibration. The DMM AUTOCAL Adapter minimizes lead changes during digital multimeter calibration, increasing efficiency without sacrificing and compromising accuracy. The portability kit provides ruggedized handles and bumpers, including protection for the front panel with a cover that also acts as storage for cablesand accessories.52120A Transconductance AmplifierWorkload is expanded even further when the 5560A is used with a 52120A Transconductance Amplifier to increase the current output to 6000 A, for calibrating high-current components such as Rogowski coils.Calibrating digital multimeters4:1 test uncertainty ratioThe 5560A calibrates a complete range of electrical workload, but it is especially ideal asa 6.5-digit multimeter calibrator, with a 4:1 test uncertainty ratio (TUR) for most popular bench-top models.The 5550A is functionally similar to the Fluke Calibration 5522A Multi-Product Calibrator; however, this new model has been enhanced with the latest technology and usability features. It calibrates most 5.5-digit multimeters and even some 6.5-digit multimeters with a 4:1 TUR across its measurement range.The 5540A Multi-Product Calibrator extends the workload capabilities of the 5502A Multi-Product Calibrator, improving performance suited for real-time demand on-site or mobile calibration. It calibrates most 4.5-digit multimeters with a 4:1 TUR across its measurement range.A 4:1 TUR enables you to quickly meet or exceed manufacturers’ specifications for calibrating digital multimeters without guardbanding and the need for additional equipment. This simpli-fies setup and reduces the number of standards required to calibrate the most demanding digital multimeters.Inductance sourcing expands 5560A and 5550A workload coverageA new inductance sourcing function expands workload coverage to more types of modern digital multimeters.Analog-to-digital converter design independent of switch resistanceA new patented ultra-linear analog-to-digital design enables the 5560A, 5550A and 5540A to achieve performance specifications that were not possible in the 5522A and 5502A, allowing you to calibrate a more accurate and demanding workload.Optimized ranging for complete workload coverage“Ranging” refers to the range over which a particular specification applies.In the 5522A and 5502A calibrators, ranging occurs in multiples of 3.3x; however, most bench top multimeters typically range at 1.2x. Since ranging is different, at some points the calibrator alone is not optimized to calibrate the digital multimeter at its ideal specification point.Calibrate a wide workload of modern test instrumentsThe 5560A, 5550A and 5540A are now optimized to match the range switching of the most popular 6.5-digit, 5.5-digit and 4.5-digit DMMs. These ranging improvements enable you to calibrate more of your multimeter workload with a single calibrator.Fast settling timeCalibrate multimeters significantly faster with improved settling time in both the 5560A, 5550A and 5540A. You’ll have less wait time and more time actually performing the tests.Re-mapped output terminals limits lead changesWe’ve re-mapped the output terminals on the 5560A, 5550A and 5540A, decoupling Aux and Sense outputs, making it possible to calibrate this type of workload with minimal lead changes. The new terminal layout marks a distinct improvement over older models. The 5522A and 5502A, for example, has shared Sense and AUX terminals, as well as shared ground and guard, so you have to change leads frequently duringa multimeter calibration. On the 5560A, 5550A and 5540A, all the terminals are dedicated and the guard terminal is moved to the side, enabling you to connect the leads once and complete the meter calibration efficiently.High-quality lead set included; optional DMM AUTOCAL Adapter for dedicated multimeter calibration5560A, 5550A and 5540A ship with a Fluke Calibration lead set that gives you a high-quality connection, matched to your calibrator.An optional DMM AUTOCAL Adapter lets you easily dedicate the calibrator to a digital multi-meter workload. The adapter plugs directly into the calibrator’s output terminals and gives you the same functionality as the included leads but with greater convenience and efficiency, reduc-ing user error.Optional DMMAUTOCAL Adapterlets you dedicatethe calibrator to adigital multimeterworkload.Calibrating clamp meters and ammetersThe increased 30 A output enables you to use the 5560A, 5550A, and 5540A as a 30 A calibrator for higher current workloads, such as clamp meters up to 1500 A (with optional current coil). Continuous output means you don’t need to put the calibrator on standby for cool down periods while using the current function. That lets you increase throughput, which can be a real time-saver if you calibrate a lot of ammeters.A new optional 1-, 2-, 10-turn current coil and a redesigned 50-turn current coil work with the 5560A, 5550A and 5540A to enable you to calibrate workload that includes clamp-type current meters and oscilloscope current probes. Each coil, like the calibrator, is designed for continuous use at 30 A with a minimum duty cycle which improves calibration throughput as much as four times. Expand workload coverage even more. Use the 5560A, 5550A or the 5540A with the Fluke Calibration 52120A Transconductance Amplifier to increase the current output to 6000 A, ideal for cali-brating high-current components such as Rogowski coils.A new optional 1-, 2-, 10-turn current coil (left) and a redesigned 50-turn current coil (right) work with the 5560A, 5550A and 5540A, enabling you to calibrate workload that includes clamp-type current meters and oscilloscope current probes.Rugged design for laboratories or on-site workReverse power protection without false trippingThe 5560A, 5550A and 5540A provide reverse power protectionand immediate output disconnection on the output terminals forall functions. The protections apply to external voltages up to300 Vpk and help protect the calibrator’s internal circuitry fromcostly operator error—preventing damage and keeping thecalibrator up and running.1000 V direct amplifierA newly designed amplifier enables the calibrator to generate lowfrequency AC voltages without the use of a transformer.Optional portability kitFor those who work in the field, the portability kit protects thecalibrator and makes it easier to transport. The kit includesfront/rear bumpers and an easy-grip side handle.A transit case (included) is designed for shipping the calibrator,with or without the portability kit.The optional portability kit protects the calibrator and makes it easier to transport.is used for outputs during oscilloscope calibrations. Active with option installedused to trigger the oscilloscope during oscilloscope calibra-tions. Active with option installedNew patented thermocouple connector lets you connectmultiple types of thermocouple types, including bare wire.Internal circuit boardsInternal printed circuit boards feature the latest digital design technologyCalibration 52120A Amplifierand USB interfacesrotate the output dial and the error is displayed directly in ppm or percentcan be stored on USB memory sticks for easy transfer to a PCOutput unitsSelect output units easily after entering the valueMultiplier keysThese keys let you conveniently step a measure-ment up or downFeatures you expect from a modern instrumentFront and rear panel improvementsVisual Connection Management™ outputterminals light up to indicate which terminals are active, guiding the user to make the correct con-nections and reducing user error.USB ports are placed both on the front and rear of the unit. Use the port at the front to download internal calibration constants; use the rear port for remote communication with a PC—or choose the LAN, IEEE or serial interfaces.For previous 55XXA users, the 5560A, 5550A and 5540A maintain many front-panel details that characterize their predecessors, including the calculator-style keyboard for entering values easily, an output dial for varying output and keys for selecting common parameters with a single touch.Graphical user interface optimized for touchscreen useA 17.8 centimeter (7-inch) graphical user interface offers intuitive menus that are easy to navigate and read, providing access to common func-tions with the touch of a finger and eliminating the menu scrolling that was required in previous 55XXA models.The screen displays all of the information you need for each parameter you’re calibrating, with color-coded fields that make it easy to see where you enter data. The menu is simplified and functions are laid out consistently so that once you learn how to operate one you know how to operate them all. Training new users just became much easier.Status indicators for OPERATE, STANDBY, and HAZARDOUS VOLTAGE appear on the screen in bright letters or icons you can recognize from across the calibration lab.The touch screen interface is available in nine languages, including English, French, German, Spanish, Japanese, Chinese, Portuguese, Russian and Korean.The graphical user interface lets you navigate easily with the touch of a finger.Visual Connection Management output terminals guide the user to make the correct connections.USB ports are placed on the front and rear for downloading constants and remote PC communication.MET/CAL™ automation increases throughput and efficiencyQuality standards impose stringent requirements for documenting, reporting, and controlling cali-bration processes and results. MET/CAL™ Calibration Management Software helps you meet these requirements while increasing throughput and streamlining voltage calibration, resistance calibration, and current calibration processes.MET/CAL™ is a powerful application for creating, editing and testing calibration procedures and collecting and reporting results on a wide variety of instruments. As the industry-leading software for automated calibration, thousands of calibra-tion procedures have been written to automate a vast array of calibrators around the world.The 5560A, 5550A and 5540A work with MET/CAL, including hundreds of automated calibration pro-cedures to consistently and dramatically improve throughput. MET/CAL v10.6 and later includes a Function Select Code (FSC) that enables you to add the 5560A, 5550A and 5540A seamlessly to your existing calibration operations.You may purchase MET/CAL with MET/TEAM™,a dedicated asset management system. It is the most complete software solution available for calibration professionals. However, if you already use a calibration asset management system, you can integrate MET/CAL into your workflow with MET/CONNECT™ Calibration Integration Software. MET/CONNECT is the hub of a fast-growing community of mainline calibration software providers that have partnered with Fluke Calibration to support MET/CAL automa-tion. Whatever calibration management system you use, MET/CONNECT unlocks calibration and workflow automation in your lab.Priority software support helps you stay productiveMET/SUPPORT Gold is an annual membership program offering premium support and services to help you stay as productive as possible with MET/CAL software. Services include free soft-ware updates and upgrades, free access to the Fluke MET/CAL Warranted Procedures Library, plus discounts on training and custom procedure development. Members also receive invitations to regular calibration software web seminars and user group meetings. Use only a few of the Gold services and you can easily recover more thanthe cost of your membership fee.Automating calibration with MET/CAL software increases throughput and efficiency. Hundreds of procedures are available for the 5560A, 5550A and 5540A.Your choice of specificationsHow often to calibrate? You decide.The 5560A includes 90-day, 1-year, and 2-year specifications, whilethe 5550A includes 90-day and 1-year specifications and the 5540Aincludes 1-year specifications. You can manage the cost of owner-ship and maximize uptime by keeping the calibrator in service aslong as possible based on your unique specification requirements.That means you may not need to calibrate it every year.Metrology training builds team skillsCalibration and metrology training from Fluke Calibration improvesthe knowledge of you and your colleagues in a wide variety ofdisciplines. Instructor-led classroom training is available for generaltopics in metrology that include both hands-on training and trainingin measurement uncertainty, as well as classes on how to use FlukeCalibration software. On-site training is available for teams withspecific training needs. Instructor-led and self-paced online coursesare available as well.Fluke Calibration also offers web seminars, events and road showson a wide variety of topics. To stay informed about these events,register online and subscribe to our e-news.Calibration and repair services keep you up and runningFluke Calibration offers extensive calibration support and servicesto ensure long-term customer satisfaction and return on invest-ment. Our worldwide network of service centers offers accreditedcalibration traceable to national standards. We provide fast, qualityrepair services and full support in setting up your calibration lab.Calibration and metrology training includes a variety ofofferings including classroom, online, and on-site.Models Description5560A* 5560A High-Performance Multi-Product Calibrator5550A* 5550A Performance Multi-Product Calibrator5540A*5540A Multi-Product Calibrator*All models include full Accredited 17025 Calibration Certificate traceable tointernational standards with data.Optionalaccessories Description55XXA/LEADS Thermocouple and Test Lead Set with Case55XXA/COIL 101, 2 and 10-Turn Current Coil, Includes an Accredited 17025 Calibration Certificate Traceable to International Standards with Data55XXA/COIL 5050-Turn Current Coil, Includes an Accredited 17025 Calibration CertificateTraceable to International Standards with Data55XXA/DMM AUTOCAL AdapterDMMCAL5560A Portability Kit for On-Site Calibrations55XXA/PORTKIT55XX/CASE Extra case. 5560A, 5550A and 5540A include hard casePremium Instrument Service Plan (where available)Priority GoldInstrumentCarePlanSoftwareaccesories DescriptionMET/CAL-SERIAL Optional Closed Loop Procedure Serial Connectivity KitProduct Support Program (where available)MET/SUPPORTGoldOptional calibration procedures for MET/CAL Calibration Software WarrantedProceduresSoftware DescriptionMET/CAL/TEAM Software, MET/CAL w/MET/TEAMMET/CAL-TL License, Additional MET/CAL (TEAM)MET/TEAM-L License, Additional MET/TEAMMET/CAL/TEAMXP Software, MET/CAL with MET/TEAM ExpressMET/TEAMXP-L License, Additional MET/TEAM ExpressMET/TEAMMOBILE-L License, Additional MET/TEAM MobileMET/TEAMPORTAL Module, MET/TEAM Customer PortalMET/TEAMPORT-L100License, additional MET/TEAM Customer Portal (pack of 100)MET/TEAMCOMMERCE Module, MET/TEAM CommerceMET/CONNECT Calibration Integration SoftwareFluke CalibrationPO Box 9090, Everett, WA 98206U.S.A.Fluke Europe B.V.PO Box 1186, 5602 BDEindhoven, The NetherlandsWeb access: http://www.flukecal.euFluke Calibration.Precision, performance, confidence.™For more information callIn the U.S.A. (877) 355-3225In Europe/M-East/Africa +31 (0) 40 2675 200In Canada (800)-36-FLUKEFrom other countries +1 (425) 446-6110Web access: ©2022 Fluke Calibration.Specifications subject to change without notice.Printed in U.S.A. 05/2022 210049-6013522-enModification of this document is notpermitted without written permissionfrom Fluke Calibration.。