ZVG66W中文资料
荣耀80se充电协议
荣耀80se充电协议
SCP 66W快充（11V/6A）
荣耀80se华为手机将快充功率提到了66W，这个功率已经算是比较快的速度，而且电压档为11V。
但实际上跟上一代40W的10V电压档来进行充电，手机端接受的电压几乎是相同的。
或者可以说他们是同一种技术。
这一次充电的电流提高到了6A，在还有非常多的华为和荣耀手机上运用，例如华为旗舰机Mate50系列，最高支持的快速充电功率为66W。
大部分的华为旗舰机都在使用这个快充档位。
在进行66W超级快充时，屏幕显示一个长闪电以及Max 66W。
在第四代66W SCP快充的同时带来了66W SCP快充的阉割版，不过都是隐藏档位。
支持66W快充的手机都兼容下面的隐藏档位，他们分别是：
①SCP 55W快充（11V/5A）。
②SCP 50W快充（10V/5A）。
FQG66源容器商品说明说明书
Container with radiation source insert and manual or pneumatic switch-on and switch-offApplicationThe FQG66 source container is designed to hold the radioactive source during radiometric point level measurement, continuous level measurement and density measurement. The radiation is emitted almost unattenuated in one direction only, and is damped in all other directions.This results in a directional, limited emission channel that is generally aligned with the detector opposite.The maximum radiation source activities which the FQG66 can accommodate are as follows:•137Cs: 740 GBq (20 Ci)•60Co: 185 GBq (5 Ci)Your benefits•Optimum shielding for high source activity•Highest safety classification for the source supplied(DIN 25426/ISO 2919, typical classification C66646)•Various angles of emission for optimum adaptation to the application•Manual switch-on/switch-off ("EIN/ON" and "AUS/OFF")•Retaining element to fix switch position ("EIN/ON" and "AUS/ OFF" respectively)•Switch state easily identified•Optional: manual or pneumatic drive with proximity switch to remotely control and monitor the switch stateProducts Solutions ServicesTechnical InformationFQG66 source containerRadiometric level measurementTI01171F/00/EN/01.1571294718FQG66 source container2Endress+HauserTable of contentsAbout this document ........................3Symbols used (3)Function and system design (4)Function ...................................4Attenuation factor and half-value layers ..............4Maximum activity of the radiation source .............4Dose rate diagrams ............................4Hazardous area ...............................7Installation (8)Orientation .................................8Mounting screw tightening torque(supplied by customer) (11)Environment (12)Ambient storage temperature ....................12Sources ...................................12Ambient pressure ............................12Vibration resistance ...........................12Shock ....................................12Degree of protection ..........................12Fire resistance ..............................12Compressed air connection ......................12Switching pressure ...........................12Required compressed air quality ...................12Mechanical construction ....................13Design ....................................13Dimensions ................................15Weight ...................................15Materials ..................................16Safety features ..............................16Operability (17)Operating concept (17)Certificates and approvals ...................18Manufacturer Declaration (18)Ordering information (19)Ordering information ..........................19Scope of delivery .............................19Delivery .. (19)Supplementary documentation ...............20Standard documentation ........................20Device-dependent additional documentation . (20)FQG66 source containerAbout this documentSymbols used Safety symbolsSymbols for certain types of InformationSymbols in graphicsEndress+Hauser3FQG66 source container4Endress+HauserFunction and system designFunctionFunction of the radiation source containerIn the FQG66 source container, the radioactive source is surrounded by a steel casing filled with lead which screens off gamma radiation. The radiation can be emitted, almost unattenuated, in one direction only through a channel (focused narrow radiation path). This radiation is used for radiometric measurement.Switching the radiation ON and OFF•The current switch position ("EIN/ON" or "AUS/OFF") is clearly visible from the outside •The current switch position ("EIN/ON" or "AUS/OFF") is secured by a lock pin•Optional pneumatics: "AUS/OFF" switch position - unpressurized; "EIN/ON" switch position -pressurizedAttenuation factor and half-value layersIn the direction of the beam •Attenuation factor F s :–For 60Co: 1 270–For 137Cs: 6 650•Number of half-value layers:–For 60Co: 10.3–For 137Cs: 12.7In the direction opposite to the beam (in the direction of the nameplate):•Attenuation factor F s :–For 60Co: 4 096–For 137Cs: 8 388 000•Number of half-value layers:–For 60Co: 12–For 137Cs: 23These are typical values that do not take into account production-related variations in the source activity and tolerances of the measuring devices.Maximum activity of the radiation source•137Cs: 740 GBq (20 Ci)•60Co: 185 GBq (5 Ci)The maximum admissible activity can be further restricted by country-specific approvals.Dose rate diagramsA dose rate diagram specifies the local dose rate at a specified distance from the surface of the radiation source container. Examples of dose rate diagrams for a distance of 1 m (3.3 ft) areprovided in the following section. All the dose rate diagrams and maximum values indicated refer to the "AUS/OFF" switch setting and order code 240 "Angle of emission", option 5 "40° horizontal".FQG66 source containerEndress+Hauser 5Dose rate diagrams for 60CoAssignment of version, see Product Configurator → 19FQG66 source containerDose rate diagrams for 137Cs6Endress+HauserFQG66 source containerEndress+Hauser 7Version assignment, see Product Configurator → 19Hazardous areaNOTICEThe suitability of the radiometric measurement method and of the device for applications in hazardous areas must be checked by the plant operator according to the national rules and regulations that apply.‣Compliance with national rules and regulations is mandatory.NOTICESource containers with a proximity switch or pneumatic drive are not suitable for hazardous areas.‣Do not use source containers with a proximity switch or pneumatic drive in hazardous areas.‣Source containers with a manual drive and without a proximity switch can be used in hazardousareas.The following must be observed:•Avoid electrostatic charge at the device. Do not rub synthetic surfaces dry.•Avoid friction sparks and impact sparks.•The device must be integrated in the plant potential equalization system.FQG66 source container8Endress+HauserInstallationOrientationOrientation for level measurementFor continuous level measurement, the source container must be mounted at the height of, or slightly above, the maximum level.The radiation must be aligned exactly with the detector mounted on the opposite side. The source container and detector should be mounted as close as possible to the product vessel to avoid control zones.A00236741FQG66: Order code 240 "Angle of emission",option 3 "20 degrees, horizontal" or option 5 "40 degrees, horizontal"2Gammapilot M FMG60A distance between the source container and the product vessel is often unavoidable if the measuring range is large and the container diameter small. This space must then be secured by grip protection and marked accordingly.A00236771FQG66: Order code 240 "Angle of emission",option 3 "20 degrees, horizontal" or option 5 "40 degrees, horizontal"2Gammapilot M FMG60FQG66 source containerEndress+Hauser 9Two or more source containers are used for large measuring ranges. The use of several sources can be necessary not only due to large measuring ranges but also for accuracy reasons.A00236791FQG66: Order code 240 "Angle of emission", option 5 "40 degrees"2Gammapilot M FMG60Orientation for point level detectionFor point level detection, the radiation source container is mounted at the same height as the detector.•Keep the distance between the FQG66and the vessel wall to a minimum!•Secure any intermediate area between the source container and wall by gripprotection, if necessary!A00236811FQG66: Order code 240 "Angle of emission", option 1 "5 degrees, horizontal"2Gammapilot M FMG60FQG66 source container10Endress+HauserOrientation for density measurement Vertical pipesIf possible, density should be measured with forward flow from bottom to top. With this type of measuring arrangement, the detector (e.g. Gammapilot M FMG60) should preferably be positioned so that it is mounted with the terminal head at the top. If this arrangement is not possible, anadditional bracket must be used to secure the detector (e.g. Gammapilot M FMG60) against slipping.A Order code 240 "Angle of emission", option 2, 4 or 6 "5, 20 or 40 degrees, vertical"B Order code 240 "Angle of emission", option 1 "5 degrees, horizontal"1Gammapilot M FMG60Horizontal pipesWith this type of orientation, it is advisable to mount the FQG66 above the pipe. Attention must be paid to the effect of air bubbles and material buildup in the pipe.1Feature 240 "Angle of emission", option model 2, 4 or 6 "5, 20 or 40 degrees, vertical"1Gammapilot M FMG60Lateral installation is only permitted in low-vibration applications, while taking safety instructions into consideration (regular inspection of the "EIN/ON" or "AUS/OFF" mechanism, padlock or retaining element and mounting clamps).Endress+Hauser 11A Source container FQG66 with vertical beam emissionB Source container FQG66 with horizontal beam emissionGeneral informationThe clamping device must be fitted in such a way as to withstand the weight of the source container and the detector (e.g. Gammapilot M FMG60) under all anticipated operating conditions (e.g.vibrations). If necessary, the customer should provide additional support with a separate, stable, low-vibration construction.Note the weights:•Gammapilot M FMG60: 14 to 29 kg (30.87 to 63.95 lb)•Gammapilot FTG20: 15.5 kg (34.18 lb)•Source container FQG66: 435 kg (959.18 lb)Mounting screw tightening torque(supplied by customer)Screw diameter M20 or G1/2EnvironmentAmbientstorage temperature •Order code 020 "Version", option A "Manual operation":–55 to +100 °C (–67 to +212 °F)•Order code 020 "Version"Option B "Manual operation + proximity switch",Option L "Pneumat. drive + proximity switch":–20 to +80 °C (–4 to +176 °F) (manual and pneumatic, with proximity switch)Sources•Temperature class 6: –40 to +800 °C (–40 to +1472 °F)•Operating temperature range: see TI00439F/00Ambient pressure Atmospheric pressureVibration resistance DIN EN 60068-2-64 test Fh; 10 to 2000 Hz; 1 (m/s²)² /Hz Shock IEC-60068-2-27 test Ea (15 g; 11 ms; 3 shocks/direction/axis) Degree of protection IP65/67, TYPE 4, TYPE 6PFire resistance+945 °C (+1733 °F) / 60 minutesThe specification can be restricted by country-specific approvals.Compressed air connection G1/8"Switching pressure•EIN/ON: 3.5 to 6 bar (51 to 87 psi)•AUS/OFF: 0 bar (0 psi)Required compressed airqualityClass 5 as per ISO 8573-1, pressure dew point 10 K below operating temperature12Endress+HauserMechanical constructionA Manual operationB Manual operation + proximity switchL Pneumatic drive + proximity switch1Lifting eye2Radiation symbols: fitted when FQG66 is loaded3Radiation source container4Padlock5Operating unit with protection cap6Bracket for mounting7Terminal housing8Sign holders (for fitting nameplates and connection for potential equalization)Endress+Hauser13Horizontal radiation emission channel2Horizontal radiation emission channelA Order code 240 "Angle of emission", option 1 "5 degrees, horizontal"B Order code 240 "Angle of emission", option 3 "20 degrees, horizontal"C Order code 240 "Angle of emission", option 5 "40 degrees, horizontal"Vertical radiation emission channel3Vertical radiation emission channelA Order code 240 "Angle of emission", option 2 "5 degrees, vertical"B Order code 240 "Angle of emission", option 4 "20 degrees, vertical"C Order code 240 "Angle of emission", option 6 "40 degrees, vertical"14Endress+HauserDimensions Manual version (order code 020, option A)4Engineering unit: mm (in)Manual version with proximity switch (order code 020, option B) orPneumatic version (order code 020, option L)5Engineering unit: mm (in)Weight Max. 435 kg (959.18 lb)Endress+Hauser15Safety features•Switch position "EIN/ON" or "AUS/OFF" respectively secured by lock pin•Lockable cover provides protection from theft16Endress+HauserOperabilityFor additional information about switching the device on and off, see BA01327F/00. Endress+Hauser1718Endress+HauserCertificates and approvalsManufacturer DeclarationA0018523Endress+Hauser 19Ordering informationOrdering informationDetailed ordering information is available from the following sources:•In the Product Configurator on the Endress+Hauser website: → Select country →Instruments → Select device → Product page function: Configure this product •From your Endress+Hauser Sales Center:/worldwideProduct Configurator - the tool for individual product configuration •Up-to-the-minute configuration data•Depending on the device: Direct input of measuring point-specific information such as measuring range or operating language •Automatic verification of exclusion criteria•Automatic creation of the order code and its breakdown in PDF or Excel output format •Ability to order directly in the Endress+Hauser Online ShopScope of delivery•FQG66 source container•Radiation source (installed; depends on version)•Radiation symbol (depends on specific version)•Technical Information: TI01171F/00•Operating Instructions: BA0132F/00•Technical Information: TI00439F/00•Special Documentation: SD00297F/00 (source replacement)•Safety Instructions: SD00292F/00 (Safety instructions for Canada)•Safety Instructions: SD01561F/00 (Safety instructions for USA)Delivery GermanyEndress+Hauser can only ship radioactive sources once we have received a copy of the handling permit. Endress+Hauser is more than happy to assist in procuring the necessary documents. Please contact your local sales center.For safety reasons and to save costs, Endress+Hauser usually supplies the source container loaded,i.e. with the radiation source installed. If the user requires the source container to be delivered first and if the source must be delivered subsequently, transportation casks are used for shipping.Other countriesEndress+Hauser can only ship radioactive sources once we have received a copy of the import license.Endress+Hauser is more than happy to assist in procuring the necessary documents. Please contact your local sales center. In the case of deliveries abroad, radioactive sources can only be delivered installed in the radiation source.The source container is in the "AUS/OFF" position when the container is delivered. This switch position is secured by a padlock. The loaded source containers are transported by a companycommissioned by Endress+Hauser and officially certified to perform this type of transportation work.Transportation is in compliance with the regulations of the European Agreement on the International Transportation of Hazardous Substances on Roads (ADR and DGR/IATA).Supplementary documentationThe following document types are available:In the Download Area of the Endress+Hauser web site: → DownloadsStandard documentation Operating Instructions: BA01327F/00Device-dependentadditional documentationGamma radiation source FSG60/FSG61Technical Information: TI00439F/00Gammapilot M FMG60•Technical Information: TI00363F/00•Operating Instructions (HART): BA00236F/00•Operating Instructions (PROFIBUS PA): BA00329F/00•Operating Instructions (FOUNDATION Fieldbus): BA00330F/00Gammapilot FTG20•Technical Information: TI01023F/00•Operating Instructions: BA01035F/00Loading and replacing the source container Special Documentation: SD00297F/00*71294718*71294718。
4kw6极电机参数
4kw6极电机参数
4kw6极电机参数是指一种电机的技术性能参数，它涉及到电机的功率、转速、电流、电压等多个方面。
在工业生产、交通运输等领域
中都是至关重要的。
首先，4kw6极电机的功率是4千瓦，这意味着它能够提供4千瓦的电力，为实现某种工作任务提供有力的动力支持。
其次，6极电机的极数是6，其有着相对较低的转速和功率密度，因此适用于一些大功率、低转速的需求场合。
此外，在应用过程中还需要关注电机电流和电压两个方面的参数。
4kw6极电机的额定电流一般在10-12安培之间，而额定电压则通常在380伏特左右，具体参数则根据电机设计的需求而有所不同。
在使用4kw6极电机时，还需要关注它的效率、噪音等问题。
高
效率的电机可以更有效地利用电能，延长其使用寿命，并减少能源消耗。
而低噪音的电机则可以提供更加舒适的使用环境，降低噪声污染
的风险。
对于4kw6极电机的使用和维护，还需要注意其故障和维修问题。
当电机出现故障时，需要及时进行诊断和修复，以保证设备的正常工作，减少生产阻碍和经济损失。
此外，定期检查和维护电机，也可以
延长其使用寿命，提高生产效率。
总的来说，4kw6极电机参数是一组重要的技术性能指标，关乎电机设备能否满足生产和工作的需要。
因此，在选型和使用过程中，需
要综合考虑实际需求和电机本身的性能，做好维护和管理工作，以实
现电机设备的稳定和可靠运行。
ZAVIO P4520 5MP 畸变纹理弯曲摄像头说明书
The P4520 is a compact, yet powerful fisheye mini dome camera featuring cutting-edge technologies. The high resolution fisheye lens provides 360° surround view with image detail even at the normally weak edges; huge 5-Megapixel image sensor ensures good low light sensitivity; our advanced fisheye dewarping algorithms keeps distortion lower than others; and last but not least, video can be streamed in the ultra-efficient H.265 format, which cuts your bandwidth and storage requirements in half and combined with ZAVIO Smart Codec to further lower the bandwidth and storage consumption to 80% less than normal H.264 cameras.It also features a removable IR-cut filter, local storage, PoE, two-way audio and alarm I/O, making it a extremely versatile camera with maximum coverage.Compatible with ZAVIO CamGraba 2.0, the most professional free NVR Software that can support up to 64 IP cameras.Innovating IP since 2006．1/1.8" 5MP CMOS sensor ．Fixed 1.49mm, F2.0．Smart Codec + H.265．5MP @ 30fps ．3D DNR．100dB WDR．ROI (Region Of Interest)．Defog．Operating conditions -10~ 60°C．Micro SD/SDHC/SDXC card slot up to 128GB．Two-way audio, with built-in mic.．1 alarm in / 1 alarm out ．12V DC & PoE (802.3af)．ONVIF 2.4 & Profile SFeaturesROI (Region Of Interest)***************|Defining a Region Of Interest will allow you to spend less bandwidth in areas that are less important while relocating resolution on the most relevant areas.Smart Codec + H.265ZAVIO Smart Codec + H.265 reduces bandwidth and storage requirements by a stunning 80% compared to standard H.264 camera.WDRCameras with WDR will take multiple exposures of the full scene and merge them together to provide an image that extends further than the human eye canperceive.Technical SpecificationsCamera Type InputImage sensor LensOutputHorizontal view angle IR working distance Min illumination Users WDRSecurityMultiple user access levels with password protection,Day/Night functionSupported protocolsICMP, FTP, SMTP, NTP, UPnP, RTSP, RTP, RTCP, HTTP, HTTPS, SSL, ResolutionsTCP, UDP ONVIFVideo compressionHousingIngress ProtectionImage settingsWeightIncluded accessories Optional accessories Certification LanguageAudio supportEthernetOperating system Power SupplyBrowserAlarm I/OVideo management Audio connector software Analog video output Installation,RS-485management and Edge storage maintenanceButtons Other(s)ZAVIO Inc. | 2F., No.24-2, Gongye E. 4th Rd., East Dist., Hsinchu City 300, Taiwan |TEL:886-3-579-0275|FAX:886-3-668-6845|E-Mail:***************©ZAVIO Inc. 2016 | All brands and product names are trademarks or registered trademarks of their respective owners | Product specifications are subject to change without prior notice.Motion JPEG/H.264/H.265:RJ-45 Ethernet 10/100 Base -T ZAVIO CamGraba 2.0 IP System software, for viewing, Windows XP / 7 / 8 / 8.1, MAC OS, LinuxMicro SD/SDHC/SDXC up to 128GB reset cameras to default while keeping network settings, etc.Reset push button -6 pin connector, line in & line out recording and archiving up to 64 cameras.-ZAVIO Installation Tool makes camera management easier with -camera image preview, firmware upgrade of multiple cameras,Terminal block, 12V DC, 1A Internet Explorer 9 / 10 / 11, Chrome, Firefox, SafariPower consumption: Max 4.2WPoE(Power over Ethernet) built-in IEEE 802.3af 6 pin connector, 1/1German, Greek, Hungarian, Italian, Japanese, Korean, Polish,Portuguese, Russian, Slovak, Spanish, Swedish, Turkish3D DNR Defog -Overlay capabilities: time, date, text and privacy Image ROI Controllable frame rate and bandwidthSupport unicast (Real Time Streaming Protocol)Working temperature: -10~ 60°C Humidity 10-100% RH Motion JPEG : up to 30 fps at 1080p, 10fps at 5MP -2 Profile from 640 x 480 to 320 x 240 (total 2 resolutions)Motion JPEGH.264 baseline/ main profile/high profile H.265-Aluminum Alloy 5MP Fisheye Mini Dome Alarm buffer, alarm input, motion detection, audio detection,1/1.8” CMOS sensor periodical, network link down.Fixed 1.49mm, F2.0Network storage, edge storage, FTP, SMTP, HTTP event, 2 Profile from 2560 x 1920 to 320 x 240 (total 4 resolutions) 2.4 & Profile S360° HTTPS, alarm out pre and post event image.-************(color)*************(B/W)10 simultaneous users100dBMechanical IR cut filter, Light sensorHTTPS encryptionIPv4, IPv6, Bonjour, TCP/ IP, DHCP, DNS, DynDNS, PPPoE, ARP,。
MPC2106CDG66中文资料
MOTOROLA FAST SRAM
MPC2105C•MPC2106C 3
元器件交易网
PIN ASSIGNMENT 178–LEAD DIMM TOP VIEW
VSS PD1/IDSDATA PD3 DH31 DH29 DH27 DH25 VDD CWE3 DH23 DH21 DH18 VSS DH16 CWE2 DH14 DH13 VCC DH10 DH8 CEW1 DH6 VDD DH4 VSS CLK0 VSS DH1 CWE0 DL31 DL30 VSS DL29 DL27 DL25 VCC CWE7 DL23 DL21 DL19 VSS DL17 CWE6 DL15 DL13 VSS DL10 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 016 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 VSS PD0/IDSCLK PD2 DH30 DH28 DH26 DH24 VDD DP3 DH22 DH20 DH19 VSS DH17 DP2 DH15 DH12 VCC DH11 DH9 DP1 DH7 VDD DH5 DH3 DH2 DH0 DP0 VSS CLK1 VSS DL28 DL26 DL24 DP7 VCC DL22 DL20 DL18 DL16 VSS DP6 DL14 DL12 DL11 VSS DL9 DL8 CWE5 DL6 VDD DL5 DL2 VSS CLK3 VSS CLK4 VSS CWE4 ALE VDD ADDR1 RESERVED CNTEN0 CNTEN1 A27 A24 A22 A20 VSS A18 A16 A15 A14 VDD A10 A8 A6 VSS A4 A2 A1 BURSTMODE VCC VALIDIN TWE STANDBY DIRTYOUT VSS 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 DP5 DL7 DL4 VDD DL3 DL1 DL0 VSS CLK2 VSS DP4 CG0 CG1 VDD ADDR0 RESERVED ADS0 ADS1 A28 A26 A25 A23 VSS A21 A19 A17 A13 VDD A12 A11 A9 VSS A7 A5 A3 A0 VCC TCLR MATCH TG DIRTYIN VSS
vo66
Preliminary Company ConfidentialProgressive Scan: 1/30 to 1/15734(s)• AGC (+24dB) - auto / programmable.• PreAmp Gain 6/12 db.• Auto-Exposure-ratio programmable.• White balance - auto/programmable.• Auto-White-Balance-ratio programmable.• Brightness & contrast adjustment.• Color Saturation adjustment.• Aperture correction.• Multiple gamma correction curve selection.• Multiple luminance gamma correction curve selection.• S/N ratio > 48 dB.• Software/Hardware Reset.• Software/hardware power saving control• Minimum illumination 2.5 lux at f1.4 (3000k).• Optical fill factor is 40%.• Supply: 5 volt for analog and Digital circuit;5volt or 3.3volt for digital interface.• Power consumption < 120 mW.• Power-save mode < 10 uA.• Chip SCCB ID: 0 1 0 CS2 CS1 CS0 1 R/W (CS2 CS1 CS0 select by PIN when power-on, default 0).• 48pin package.OV7620 Product Specifications - Rev. 1.2 (5/13/00) OMNIVISION TECHNOLOGIES INC.4Preliminary Company Confidential1.2 Pin AssignmentsTable 1:Pin Descriptions(Pin type and default level: I-1: digital input+10k pull up; I-0: digital input +10k pulldown, XI/XO; xtal IO; /Secondary functions are set during power up; O/I: digital CMOS level output Bias: powersupply bias.).Pin # Name Class Function1 SVDD Bias Sensing Power (+5V) pins.8, 14,44 AVDD Bias Analog Power (+5V) pins.29 DVDD Bias Digital Power (+5V) pins.32 DOVDD Bias Digital I/O Power (+5V / +3.3V) pins.48 SGND Bias Sensing ground connections. Connect to supply common6, 7, 15, 43 AGND Bias Analog ground connections. Connect to supply common30 DGND Bias Digital ground connection. Connect to supply common31 DOGND Bias Digital Output ground connection.2 RESET I Chip reset, “high” active.3 AGCEN/RAMINT I-I AGCEN =1 enables the Auto Gain Control. AGCEN = 0 disables it.This pin setting is effective when pin SBB = 1.RAMINT=1 initializes frame transfer.4 FREX I Frame exposure control input, effective in progressive scan only.The positive width of FREX defines the exposure time.5 VrEQ CAP Internal voltage reference. Requires an 0.1uF decoupling capacitorto ground.9 PWDN I-0 PWDN =1 puts chip in power down (sleep) mode.10 VrS CAP Internal voltage reference. Requires an 0.1uF decoupling capacitorto ground.11 VcCHG CAP Internal voltage reference. Requires an 1.0uF decoupling capacitorto ground.12 SBB I SBB = 1 selects the power-up method of programming the internalfunctions. SBB = 0 selects the SCCB pin programming method.Results of the power-up method can only be changed by a newpower-up or reset sequence.13 VTO O Video Test Output (NTSC)16 VSYNC/CSYS O/I VSYNC: Vertical sync output. This pin is asserted high during severalscan lines in the vertical sync period.CSYS: Composite Sync. When not using SCCB, a 10k pull upchanges pin 42(CHSYNC) to CSYS.17 FODD/SRAM O/I FODD: Odd field flag. Asserted high during the odd field, low duringthe even field.SRAM: External SRAM18 HREF/VSFRAM O/I HREF: Horizontal window reference output. HREF is high during theactive pixel window, otherwise low.VSFRAM: Vertical Sync Frame.19 UV7/B8 O/I UV7: Digital output UV bus. UV7 used for 16-bit operation for outputting chrominance data.B8: Switch for 8 bit mode luminance/Chroma tristate. Default is 16bit mode.20 UV6/BPCLR O/I UV6: Digital output UV bus. UV6 used for 16-bit operation for outputting chrominance data.BPCLR: Bypass RGB color matrix.21 UV5/MIR O/I UV5: Digital output UV bus. UV5 used for 16-bit operation for outputting chrominance data.MIR: Mirror.。
DS-2XC6646G0 P-IZH(R)S 4 MP ANPR IR Varifocal Bull
DS-2XC6646G0/P-IZH(R)S4 MP ANPR IR Varifocal Bullet Network Camera⏹High quality imaging with 4 MP resolution⏹Excellent low-light performance via DarkFighter technology⏹Clear imaging against strong back light due to 120 dB WDR technology⏹License Plate Recognition⏹Efficient H.265+ compression technology to save bandwidth and storage⏹ 5 streams to meet a wide variety of applications⏹Water and dust resistant (IP67)⏹316L stainless steel enclosure, protecting cameras to be used in corrosive environments, providing reliability andlongevity compared to standard cameras⏹ A built-in wiper(-R) removes water and dust on the screen and ensures clear images when the camera is used in dustyor damp environmentsSpecificationCameraImage Sensor 1/1.8" Progressive Scan CMOSMax. Resolution 2688 × 1520Min. Illumination Color: 0.0005 Lux @ (F1.2, AGC ON), B/W: 0.0001 Lux @ (F1.2, AGC ON), 0 Lux with IR Shutter Time 1 s to 1/100,000 sDay & Night IR cut filterBlue glass module to reduce ghost phenomenonLensFocal Length & FOV 2.8 to 12 mm, horizontal FOV 100.8° to 40.2°, vertical FOV 53.3° to 22.5°, diagnol FOV 122.3° to 46.2°8 to 32 mm, horizontal FOV 40.7° to 14.6°, vertical FOV 22.3° to 8.3°, diagnol FOV 47.4°to 16.7°Focus Auto, semi-auto, manualAperture 2.8 to 12 mm: F1.38 to F2.5 8 to 32 mm: F1.7DORIDORI Wide:2.8 to 12 mm: D: 60 m, O: 23.8 m, R: 12 m, I: 6 m8 to 32 mm: D: 150.3 m, O: 59.7 m, R: 30.1 m, I: 15 m Tele:2.8 to 12 mm: D: 149 m, O: 59.1 m, R: 29.8 m, I: 14.9 m 8 to 32 mm: D: 400 m, O: 158.7 m, R: 80 m, I: 40 mIlluminatorSupplement Light Type IRSupplement Light Range 2.8 to 12 mm: 60 m 8 to 32 mm: 100 mSmart Supplement Light YesIR Wavelength 850 nm VideoMain Stream 50 Hz: 25 fps (2688 × 1520, 2560 × 1440, 1920 × 1080, 1280 × 720) 60 Hz: 30 fps (2688 × 1520, 2560 × 1440, 1920 × 1080, 1280 × 720)Sub-Stream 50 Hz: 25 fps (704 × 576, 640 × 480) 60 Hz: 30 fps (704 × 480, 640 × 480)Third Stream 50 Hz: 25 fps (1920 × 1080, 1280 × 720, 704 × 576, 640 × 480) 60 Hz: 30 fps (1920 × 1080, 1280 × 720, 704 × 480, 640 × 480)Fourth Stream 50 Hz: 25 fps (704 × 576, 640 × 480) 60 Hz: 30 fps (704 × 480, 640 × 480)Fifth Stream 50 Hz: 25 fps (704 × 576, 640 × 480) 60 Hz: 30 fps (704 × 480, 640 × 480)Video Compression Main stream: H.265+/H.265/H.264+/H.264Sub-stream/Fourth stream/Fifth stream: H.265/H.264/MJPEG Third stream: H.265/H.264Video Bit Rate 32 Kbps to 8 MbpsH.264 Type Baseline Profile/Main Profile/High Profile H.265 Type Main ProfileBit Rate Control CBR/VBRScalable Video Coding (SVC) H.265 and H.264 encodingRegion of Interest (ROI) 5 fixed regions for each streamTarget Cropping YesAudioAudio Type Mono soundAudio Compression G.711/G.722.1/G.726/MP2L2/PCM/AAC-LC/MP3Audio Bit Rate 64 Kbps (G.711)/16 Kbps (G.722.1)/16 Kbps (G.726)/32 to 192 Kbps (MP2L2)/16 to 64 Kbps (AAC-LC)/8 to 320 Kbps (MP3)Audio Sampling Rate 8 kHz/16 kHz/32 kHz/44.1 kHZ/48 kHz Environment Noise Filtering YesNetworkProtocols TCP/IP, ICMP, HTTP, HTTPS, FTP, SFTP, SRTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP,UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour, SSL/TLS, WebSocket, WebSocketsSimultaneous Live View Up to 20 channelsAPI Open Network Video Interface (Profile S, Profile G, Profile T), ISAPI, SDK, ISUP User/Host Up to 32 users. 3 user levels: administrator, operator and userSecurity Password protection, complicated password, HTTPS encryption, 802.1X authentication (EAP-TLS, EAP-LEAP, EAP-MD5), watermark, IP address filter, basic and digest authentication for HTTP/HTTPS, WSSE and digest authentication for Open Network Video Interface, RTP/RTSP OVER HTTPS, Control Timeout Settings, Security Audit Log, TLS 1.2Network Storage NAS (NFS, SMB/CIFS), auto network replenishment (ANR)Together with high-end Hikvision memory card, memory card encryption and health detection are supported.Client iVMS-4200, Hik-Connect, Hik-CentralWeb Browser Plug-in required live view: IE10, IE11Plug-in free live view: Chrome 57.0+, Firefox 52.0+, Safari12+ Local service: Chrome 57.0+, Firefox 52.0+ImageImage Parameters Switch YesImage Settings Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance adjustable by client software or web browserDay/Night Switch Day, Night, Auto, Schedule, Alarm Trigger, Video TriggerWide Dynamic Range (WDR) 120 dBSNR ≥ 52 dBImage Enhancement BLC, HLC, Defog, 3D DNRPicture Overlay LOGO picture can be overlaid on video with 128 × 128 24bit bmp formatImage Stabilization EISInterfaceEthernet Interface 1 RJ45 10 M/100 M/1000 M self-adaptive Ethernet portOn-Board Storage Built-in memory card slot, support microSD/microSDHC/microSDXC card, up to 256 GBAudio 1 input (line in), two-core terminal block, max. input amplitude: 3.3 Vpp, input impedance: 4.7 KΩ, interface type: non-equilibrium; 1 output (line out), two-core terminal block, max. output amplitude: 3.3 Vpp, output impedance: 100 Ω, interface type: non-equilibriumAlarm 1 input, 1 output (max. 24 VDC, 1 A or max. 110 VAC, 500 mA)RS-485 Without -R: 1 RS-485 (half duplex, HIKVISION, Pelco-P, Pelco-D, self-adaptive) -R: does not supportReset Key YesWiegand /P: 1 Wiegand (CardID 26bit, SHA-1 26bit, Hik 34bit, NEWG 72bit) EventBasic Event Motion detection, video tampering alarm, exception (network disconnected, IP address conflict, illegal login, abnormal reboot, HDD full, HDD error), video quality diagnosis, vibration detectionSmart Event Line crossing detection, intrusion detection, region entrance detection, region exiting detection (support alarm triggered by specified target types (human and vehicle)) Scene change detection, audio exception detection, defocus detectionLinkage Upload to FTP/NAS/memory card, notify surveillance center, send email, trigger alarm output, trigger recording, trigger capture, audible warningDeep Learning FunctionRoad Traffic and Vehicle Detection Blocklist and allowlist: up to 10,000 recordsCaptures vehicle that has no license plateSupport license plate recognition of motorcycles (only in checkpoint scenario) Support vehicle attribute detection, including vehicle type, color, brand, etc. (City Street mode is recommended.)Metadata Metadata of road traffic is supported. GeneralPower 12 VDC ± 20%, 1.8 A, max. 22 W, three-core terminal blockPoE: 802.3at, Type 2, Class 4, 42.5 V to 57 V), 0.5 A to 0. 4 A, max. 22 WMaterial 316L and anti-corrosion coatingDimension With -R: 240.8 mm × 145 mm × 166.6 mm (9.5" × 5.7" × 6.6") Without -R: 224 mm × 145 mm × 143.5 mm (8.8" × 5.7" × 5.6")Package Dimension 477 mm × 235 mm × 302 mm (18.7" × 9.3" × 11.9")Weight With -R: approx. 4265 g (9.4 lb.) Without -R: approx. 3710 g (8.2 lb.)With Package Weight With -R: approx. 5115 g (11.3 lb.) WIthout -R: approx. 4560 g (10.1 lb.)Storage Conditions -40 °C to 60 °C (-40 °F to 140 °F). Humidity 95% or less (non-condensing) Startup and OperatingConditions-40 °C to 60 °C (-40 °F to 140 °F). Humidity 95% or less (non-condensing)Language 33 languages: English, Russian, Estonian, Bulgarian, Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch, Portuguese, Spanish, Romanian, Danish, Swedish, Norwegian, Finnish, Croatian, Slovenian, Serbian, Turkish, Korean, Traditional Chinese, Thai, Vietnamese, Japanese, Latvian, Lithuanian, Portuguese (Brazil), UkrainianGeneral Function Anti-banding, 5 streams, heartbeat, mirror, privacy mask, flash log, password reset via email, pixel counterHeater YesWiper -R: Yes ApprovalEMC FCC: 47 CFR Part 15, Subpart BCE-EMC: EN 55032: 2015, EN 61000-3-2:2019, EEN 61000-3-3:2013+A1:2019, EN 50130-4: 2011 +A1: 2014RCM: AS/NZS CISPR 32: 2015IC: ICES-003: Issue 7KC: KN 32: 2015, KN 35: 2015Safety UL: UL 62368-1CB: IEC 62368-1:2014+A11CE-LVD: EN 62368-1:2014/A11:2017BIS: IS 13252(Part 1):2010/ IEC 60950-1 : 2005 LOA: IEC/EN 60950-1Environment CE-RoHS: 2011/65/EUWEEE: 2012/19/EUReach: Regulation (EC) No 1907/2006Protection IP67: IEC 60529-2013IK10: IEC 62262: 2002 (without -R)Anti-Corrosion Protection NEMA 4X: NEMA 250-2018C5-M: 720H neutral salt spray, 480H water condensation;Exterior environments: industrial areas with high humidity and aggressive atmosphere and coastal areas with high salinity;Interior environments: buildings or areas with almost permanent condensation and with high pollution.⏹FunctionRoad Traffic and Vehicle DetectionWith embedded deep learning based license plate capture and recognition algorithms, the camera alone can achieve plate capture and recognition. The algorithm enjoys the high recognition accuracy of common plates and complex-structured plates, which is a great step forward comparing to traditional algorithms. Blocklist and allowlist are available for plate categorization and separate alarm triggering.⏹Typical ApplicationHikvision products are classified into three levels according to their anti-corrosion performance. Refer to the following description to choose for your using environment.This model has TOP-LEVEL PROTECTION.Level DescriptionTop-level protection Hikvision products at this level are equipped for use in areas where professionalanti-corrosion protection is a must. Typical application scenarios include coastlines, docks,chemical plants, and more.Moderate protection Hikvision products at this level are equipped for use in areas with moderate anti-corrosiondemands. Typical application scenarios include coastal areas about 2 kilometers (1.24miles) away from coastlines, as well as areas affected by acid rain.No specific protection Hikvision products at this level are equipped for use in areas where no specificanti-corrosion protection is needed.050704020220921⏹ Dimension⏹ Accessory⏹Optional DS-1704ZJ-Y-AC(OS)Wall Mount⏹ Available ModelDS-2XC6646G0/P-IZHS (2.8 to 12 mm, 8 to 32 mm) DS-2XC6646G0/P-IZHRS (2.8 to 12 mm, 8 to 32 mm)。
NEVERSEEZ NG-165 NUC 产品说明书
SAFETY DATA SHEETNEVERSEEZ NG-165 NUCPRODUCT NO.48014SUPPLIERBOSTIK LIMITEDCOMMON ROADSTAFFORDSTAFFORDSHIREST16 3EH+44 1785 272625+44 1785 272650 (24 HOUR)This product, which contains nickel powder, is not an inhalation hazard in the form supplied however any dust formed by the product should be treated as hazardous.Remove victim immediately from source of exposure. Move the exposed person to fresh air at once. Get medical attention. INGESTIONDO NOT induce vomiting. Get medical attention immediately.SKIN CONTACTRemove affected person from source of contamination. Promptly flush contaminated skin with water. Promptly remove clothing if soaked through and flush the skin with water. Get medical attention if irritation persists after washing.EYE CONTACTRinse the eye with water immediately. Continue to rinse for at least 15 minutes and get medical attention.Use fire-extinguishing media appropriate for surrounding materials.SPECIFIC HAZARDSFire creates: Toxic gases/vapours/fumes of Carbon monoxide (CO). Carbon dioxide (CO2).PROTECTIVE MEASURES IN FIRESPILL CLEAN UP METHODSWear necessary protective equipment. Stop leak if possible without risk. DO NOT touch spilled material. Do not contaminate water sources or sewer. Absorb in vermiculite, dry sand or earth and place into containers. Flush with plenty of water to clean spillage area. DoAvoid spilling, skin and eye contact. Persons susceptible for allergic reactions should not handle this product.STORAGE PRECAUTIONSStore at moderate temperatures in dry, well ventilated area. Do not store in direct sunlight.STORAGE CLASSChemical storage.WEL = Workplace Exposure Limit.INGREDIENT COMMENTSWEL = Workplace Exposure LimitsPROTECTIVE EQUIPMENTPROCESS CONDITIONSUse engineering controls to reduce air contamination to permissible exposure level.RESPIRATORY EQUIPMENTWear respirator if there is dust formation.HAND PROTECTIONProtective gloves must be used if there is a risk of direct contact or splash.EYE PROTECTIONWear splash-proof eye goggles to prevent any possibility of eye contact.OTHER PROTECTIONWear appropriate clothing to prevent repeated or prolonged skin contact.HYGIENE MEASURESDO NOT SMOKE IN WORK AREA! Wash at the end of each work shift and before eating, smoking and using the toilet. Promptly remove any clothing that becomes contaminated. Wash promptly with soap & water if skin becomes contaminated. When using do not eat, drinkCOLOUR Grey SilverODOUR GreaseStable under normal temperature conditions.CONDITIONS TO AVOIDAvoid contact with strong oxidisers.MATERIALS TO AVOIDStrong acids. Strong oxidising substances.HAZARDOUS DECOMPOSITION PRODUCTSFire creates: Toxic gases/vapours/fumes of: Carbon monoxide (CO). Carbon dioxide (CO2).Harmful by inhalation. if a dust is formed.INGESTIONSwallowing concentrated chemical may cause severe internal injury.SKIN CONTACTMay cause sensitisation by skin contact. May cause serious chemical burns of the skin. Irritating to skin.EYE CONTACTMay cause chemical eye burns. May cause severe irritation to eyes.HEALTH WARNINGSHypersensitivity to nickel is common and can cause allergic contact dermatitis, pulmonary asthma, conjunctivitis and inflammmatoryreactions around nickel containing medical implants and prostheses.(Sax)OTHER HEALTH EFFECTSCarcinogen Category 3.ROUTE OF ENTRYSkin and/or eye contact. Ingestion. Inhalation.MEDICAL CONSIDERATIONSSkin disorders and allergies.Not regarded as dangerous for the environment. However, contamination of the aquatic or terrestrial environments should be avoidedThis material is not classified as special waste as defined by Special Waste Regulations 1996.DISPOSAL METHODSThe product is not covered by international regulation on the transport of dangerous goods (IMDG, IATA,ADR/RID).No transport warning sign required.HarmfulCONTAINS NICKELRISK PHRASESR40Limited evidence of a carcinogenic effect.R43May cause sensitisation by skin contact.SAFETY PHRASESS36/37Wear suitable protective clothing and gloves.S60This material and its container must be disposed of as hazardous waste. STATUTORY INSTRUMENTSChemicals (Hazard Information and Packaging) Regulations. Control of Substances Hazardous to Health.APPROVED CODE OF PRACTICESafety Data Sheets for Substances and Preparations. Classification and Labelling of Substances and Preparations Dangerous for Supply.GUIDANCE NOTESThis product should be used as directed by Bostik Ltd. For further information consult the product data sheet or contact Technical Services. INFORMATION SOURCESThis safety data sheet was compiled using current safety information supplied by distributor of raw materials.REVISION COMMENTSNOTE: Lines within the margin indicate significant changes from the previous revision. This safety data sheet supersedes all previousissues and users are cautioned to ensure that it is current. Destroy all previous data sheets and if in doubt contact Bostik Limited.ISSUED BYApproved LJREVISION DATE November 2009REV. NO./REPL. SDS GENERATED3DATE March 2003RISK PHRASES IN FULLR15Contact with water liberates extremely flammable gases.R17Spontaneously flammable in air.R40Limited evidence of a carcinogenic effect.R43May cause sensitisation by skin contact.。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
ZVG66W
11mm x 1.4mm BACKLIGHT
Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters.
Published Date : FEB 25,2008
Drawing No : SDSA4720
V3
Checked : B.L.LIU
P.3/4
元器件交易网
Part Number:
ZVG66W
11mm x 1.4mm BACKLIGHT
PACKING & LABEL SPECIFICATIONS
Part Number:
ZVG66W
11mm x 1.4mm BACKLIGHT
VG
Published Date : FEB 25,2008
Drawing No : SDSA4720
V3
Checked : B.L.LIU
P.2/4
元器件交易网
Wavelength nm λP
Viewing Angle 2 θ 1/2
ZVG66W
Green
InGaAlP
Water Clear
36
574
120°
Published Date : FEB 25,2008
Drawing No : SDSA4720
V3
Checked : B.L.LIU
P.1/4
元器件交易网
元器件交易网
Part Number:
www.SunLHale Waihona Puke
ZVG66W
11mm x 1.4mm BACKLIGHT
Features
LOW POWER CONSUMPTION. IDEAL FOR BACKLIGHTING. RoHS COMPLIANT.
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] VR IF iFS PT TA Tstg VG (InGaAlP) 5 30 150 75 -40 ~ +85 -40 ~ +85 Operating Characteristics (TA=25°C) Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength of Peak Emission (Typ.) (IF=20mA) Wavelength of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) VF VF IR VG (InGaAlP) 2.1 2.5 10 Unit V V uA
Unit V mA mA mW °C
λP
574
nm
260°C For 3 Seconds 260°C For 5 Seconds
λD
570
nm
Δλ
20
nm
C
15
pF
Part Number
Emitting Color
Emitting Material
Lens-color
Luminous Intensity (IF=20mA) mcd min. typ. 98
ZVG66W
Published Date : FEB 25,2008
Drawing No : SDSA4720
V3
Checked : B.L.LIU
P.4/4