ABB船用电机
ABB 电机说明书
Dimensions: [mm]detail Aand are connected to each other.Scale - 1:1,57443763540068744376354006874437635400687443763540068T e m p e r a t u r eT T T 7443763540068Cautions and Warnings:The following conditions apply to all goods within the product series of WE-HCFT ofWürth Elektronik eiSos GmbH & Co. KG:General:•This electronic component is designed and manufactured for use in general electronic equipment.•Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are especially required and/or if there is the possibility of direct damage or human injury.•Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer. •The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the wire insulation may be damaged or dissolved.•Do not drop or impact the components, the component may be damaged.•Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and sustainability over time.•The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products also apply to customer specific products.Product specific:Soldering:•The solder profile must comply with the technical product specifications. All other profiles will void the warranty.•All other soldering methods are at the customers’ own risk.Cleaning and Washing:•Washing agents used during the production to clean the customer application might damage or change the characteristics of the wire insulation, marking or plating. Washing agents may have a negative effect on the long-term functionality of the product. Potting:•If the product is potted in the customer application, the potting material might shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the core. Expansion could damage the component. We recommend a manual inspection after potting to avoid these effects.Storage Conditions:• A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of shipment.•Do not expose the components to direct sunlight.•The storage conditions in the original packaging are defined according to DIN EN 61760-2.•The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components. Packaging:•The packaging specifications apply only to purchase orders comprising whole packaging units. If the ordered quantity exceeds or is lower than the specified packaging unit, packaging in accordance with the packaging specifications cannot be ensured. Handling:•Violation of the technical product specifications such as exceeding the nominal rated current will void the warranty.•Applying currents with audio-frequency signals may result in audible noise due to the magnetostrictive material properties.•Due to heavy weight of the components, strong forces and high accelerations may have the effect to damage the electrical connection or to harm the circuit board and will void the warranty.•The temperature rise of the component must be taken into consideration. The operating temperature is comprised of ambient temperature and temperature rise of the component.The operating temperature of the component shall not exceed the maximum temperature specified.These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable.However, no responsibility is assumed for inaccuracies or incompleteness.Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODElGa001.0062023-07-27DIN ISO 2768-1mDESCRIPTIONWE-HCFT Flat Wire THT HighCurrent Inductor ORDER CODE7443763540068SIZE/TYPE BUSINESS UNIT STATUS PAGEImportant NotesThe following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at .3. Best Care and AttentionAny product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODElGa001.0062023-07-27DIN ISO 2768-1mDESCRIPTIONWE-HCFT Flat Wire THT HighCurrent Inductor ORDER CODE7443763540068SIZE/TYPE BUSINESS UNIT STATUS PAGE。
ABB电机样本ABB电机样本QABP
QABP系列变频调速三相异步电动机ABB电机产品特点ABB Product FeaturesQABP系列突出特点Outstanding Features of QABP Motors产品概述Summary型号说明Type Designation使用条件Conditions功率与机座号的对应关系表Output & Framesize额定转矩、标称功率与调频范围的对应关系表Output, Torque & Frequency Table主要技术性能Major Performance绕组绝缘Winding Insulation轴电流和绝缘轴承Bearing Currents and Insulated Bearings订货须知Order Notice电机技术数据表Technical Data Table电机所带独立电源的轴流风机技术参数Technical Data Table for Ventilator制动器参数Electromagnetic Brake Data编码器参数Encoder Data安装结构型式Mounting Arrangements (IM)安装及外形尺寸Overall Dimensions电机铭牌Rating Plate电机振动与噪音限值Vibration and Noise Level轴承型号、出线孔尺寸Bearing Specification and Cable Entry轴流风机出线孔Ventilator's Cable EntryQABP变量代码适用表QABP Variant Code List 4 4 5 6 6 6 7 7 8 8 8 9 11 11 12 13 14 15 16 16 16 17目 录 Ｃｏｎｔｅｎｔ QABP 系列突出特点Outstanding Features of QABP Motors采用高等级耐电晕复合漆包线，绕组性能可靠，电机使用寿命更长。
ABB REM 543 545电动机和发电机保护终端 说明书
模拟量输出 如果 REM541 和 REM543 电机终端配置了前 述的 RTD/ 模拟量输入模块，该模块同时具有 4 个通用的 0...20mA 模拟电流输出。所有的 输出通道同电源和电机终端的机箱是隔离的， 且通道之间也是隔离的。模拟量输出可以用 作测量或计算信息传到盘表或 PLC 等。
LED 指示灯 电机终端具有 8 个 LED 指示灯，用继电器配置 工具软件可以对这些 LED 进行配置。可以任意 设定 LED 的颜色（绿、黄、红）、 所关联的信 号和常亮 / 常暗状态。并具有三种信号驱动模 式：信号不保持、信号保持常亮和信号保持闪 烁。报警信号可由远方、就地或者通过使用电 机终端的逻辑来复归。
设计（续）
REM 543/545 电动机和发电机保护终端
一些特定的开关量输入可以被配置为开关量输 入或脉冲计数输入口。当开关量输入口被配置 为脉冲计数器输入口工作时，输入的脉冲计数 频率范围为 0…100 Hz。
外部接点抖动和振荡过滤 电机终端有两个综合参数用于外部接点输入 抖动过滤。这些设定的参数用于检测所有开 关量是否发生了接点抖动或振荡。如果检测 到接点抖动或振荡，将作为事件记录。
● 具有三个通讯接口：一个用于与 PC 机的就 地通讯，另外两个通过远方通讯系统用于变 电站控制或监视。
● ABB 变电站自动化系统成员之一。
REM543 和 REM545 旋转电机终端被设计作 为小型和中型功率内燃机、水电厂和火力发电 厂里的发电机和发电机—变压器组单元的综合 主保护。还可用于水泵、鼓风机、碾磨机和粉 碎机等中压同步 / 异步电机的保护。REM 54_ 电机终端作为一个综合装置也能满足船用电机 保护单元紧凑性的需求。
显示面板 电机终端具有固定液晶屏，也可以选择外部的显 示液晶屏（注：与装置通过CAN 总线连接）。外 部的显示液晶屏模块需要独立的电源或者和装置 共用外部电源。液晶显示器共可以显示19行，分 成2个窗口：主窗口（17行），辅助窗口（2 行）。
ABB电机 型号
ABB电机，俗称“马达”，是指依据电磁感应定律实现电能的转换或传递的一种电磁装置。
电动机也称(俗称马达)，在电路中用字母“M”(旧标准用“D”)表示。
它的主要作用是产生驱动转矩，作为用电器或各种机械的动力源，发电机在电路中用字母“G”表示。
ABB电机系列产品分类：普通电机M2QA系列国产、进口0.15—315KW,71—315M宽电压变频电机QABP系列国产、进口0.25—200KW,71—315M宽电压电磁制动电机QAEJ; MQAEJ系列国产、进口0.37—45KW,71—225M船用电机M2QA—H系列国产、进口0.15—315KW,80—315M宽电压双速电机QAD系列国产、进口0.15—315KW,71—315M宽电压铁路列车专用电机SL系列国产、进口0.15—315KW,71—355M宽电压烟道电机M2SV系列国产0.15—315KW,80—315M宽电压铝壳电机QAL系列国产、进口0.06—7.5KW宽电压外转子电机YDFW系列国产、进口0.25—7.5KW宽电压无火花防爆电机M2QP系列国产、进口0.15—315KW,80—355M宽电压隔爆防爆电机M2JA系列国产0.15—315KW,80—355M宽电压港口设备专用电机M2QA-G系列国产、进口0.15—315KW,71—355M宽电压高压电机系列国产、进口非标系列按技术要求设计定制ABB集团总部设在瑞士苏黎世，在全球140个国家和地区设有分公司1000多家，是全球老牌500强公司。
ABB电机是全球行业的领航者，其拥有超过100年的电机制造经验。
全球销量第一。
以技术先进、使用经济、节能高效、环保安全，誉满全球。
无锡西贝尔自动化科技有限公司是ABB电机公司指定的代理商，是一支讲原则、懂技术、富有朝气的中轻年队伍。
公司依托于世界顶级公司--ABB集团资源，为广大客户提供一流的产品、一流的服务。
使用ABB产品，是提升企业形象、产品质量、档次、销量的有效途径。
ABB电机产品介绍
© ABB Group November 8, 2014 | Slide 25
上海ABB电机
电机的有关结构、技术参数
• 冷却方式：用IC表示，如IC411、IC416 • 安装方式：IMB3、IMB35、IMB5、IMV1、IMV3等 IMB3表示：轴伸水平，有底脚 IMB35表示：轴伸水平，有法兰有底脚 IMB5表示：轴伸水平，有法兰无底脚 IMV1表示：轴伸向下，有法兰无底脚 IMV36表示：轴伸向上，有法兰有底脚:
© ABB Group November 8, 2014 | Slide 26
电机绝缘系统的等级
摄氏度 130 120 温升= 80K (rotor 90)
155 145 温升=105K ( rotor 110) 40
180 165
温升=125K (rotor 130) 40
40 等级
B
F
ABB低压电机产品结构层次
M4BP M3BP M3AA M3BA M2CA
Process performance 流程工业电机
Industrial performance 工业电机 General performance 一般应用电机
M2AA
M2BA/M2QA
NO ABB PRODUCTS available BRAND DAMAGING AREA
上海ABB电机
电机的定义 电机是电能与机械能转换的装置 PInput POutput
load
PL o sses
© ABB Group November 8, 2014 | Slide 14
上海ABB电机
电机的分类 直流电机 旋转电机 交流电机 异步电机
同步电机
按相数分 按电压分 按外壳分 按转子绕组形式分 瑞典电机工厂– SEMOT
ABB电机选型指导
ABB电机选型指导
1、铸铁全封闭船用三相异步电动机（标准型）
在型号中一般不显示）
表示铁芯长度：A为短铁芯、B为长铁芯
（M2QA和QA系列通常为A）
表示极数
表示电机功率
L为长机座、M为中机座、S为短机座
表示机座号通常以中心高（mm）表示
系列号标记
2、铸铁全封闭船用三相异步电动机（经济型）
表示铁芯长度：A为短铁芯、B为长铁芯
表示极数
表示电机功率
L为长机座、M为中机座、S为短机座
表示机座号通常以中心高（mm）表示
系列号标记
注意：以上电机防护等级分：B级（IP54）和F级（IP55）
3、铸铁全封闭自扇冷式三相异步电动机
表示铁芯长度：A为短铁芯、B为长
铁芯
表示极数
表示电机功率
L为长机座、M为中机座、S为短机
座
机座号通常以中心高（mm）表示
系列号标记（全封闭自扇冷式）4、铸铁全封闭无火花型三相异步电动机
表示铁芯长度：A为短铁芯、B为长
铁芯
表示极数
表示电机功率
L为长机座、M为中机座、S为短机
座
表示机座号通常以中心高（mm）表示
系列号标记（全封闭无火花型）
附：无火花型电动机的防爆标记
设备最高温度200摄氏度
工厂用电设备
无火花型：型号
防爆标记
5、三相异步变频调速电动机
表示铁芯长度：A为短铁芯、B为
铁芯
表示极数
表示电机功率
L为长机座、M为中机座、S为短机
座
中心高
系列号
以上参数及特性具体内容，可对照价格本上备注栏查看！如有疑问望来件1449查询！。
abb高压电机结构
abb高压电机结构
ABB高压电机结构主要包括定子、转子和轴承三部分。
1.定子：定子由机座、铁心和绕组等组成。
机座是电机的外壳，起
着支撑和固定定子的作用。
铁心由硅钢片组成，用于导磁和支撑绕组。
绕组是电机的电路部分，用于产生电磁场。
2.转子：转子由转轴、铁心和绕组等组成。
转轴用于支撑转子并传
递扭矩。
铁心由硅钢片组成，用于导磁。
绕组是电机的电路部分，用于产生电磁场并产生扭矩。
3.轴承：轴承是电机的支撑部分，用于支撑转轴并承受电机的重量
和扭矩。
此外，ABB高压电机还配备有多种附件，如风扇、散热器、温度传感器等，以实现电机的散热和保护功能。
同时，ABB高压电机还采用先进的控制系统和保护装置，以确保电机的安全可靠运行。
ABB电机型号大全
QABP系列变频调速电机：2P：QABP 71M2A，0.37KW-2P QABP 71M2B，0.55KW-2P QABP 80M2A，0.75KW-2P QABP 80M2B，1.1KW-2P QABP 90S2A，1.5KW-2P QABP 90L2A，2.2KW-2P QABP 100L2A，3KW-2P QABP 112M2A，4KW-2P QABP 132S2A，5.5KW-2P QABP 132S2B，7.5KW-2P QABP 160M2A，11KW-2P QABP 160M2B，15KW-2P QABP 160L2A，18.5KW-2P QABP 180M2A，22KW-2P QABP 200L2A，30KW-2P QABP 200L2B，37KW-2P QABP 225M2A，45KW-2P QABP 250M2A，55KW-2P QABP 280S2A，75KW-2P QABP 280M2A，90KW-2P QABP 315S2A，110KW-2P QABP 315M2A，132KW-2P QABP 315L2A，160KW-2P QABP 315L2B，200KW-2P QABP 355M2A，250KW-2P QABP 355L2A，315KW-2P4P：QABP 71M4A，0.25KW-4P QABP 71M4B，0.37KW-4P QABP 80M4A，0.55KW-4P QABP 80M4B，0.75KW-4P QABP 90S4A，1.1KW-4P QABP 90L4A，1.5KW-4P QABP 100L4A，2.2KW-4P QABP 100L4B，3KW-4P QABP 112M4A，4KW-4P QABP 132S4A，5.5KW-4P QABP 132M4A，7.5KW-4P QABP 160M4A，11KW-4P QABP 160L4A，15KW-4P QABP 180M4A，18.5KW-4PQABP 180L4A，22KW-4P QABP 200L4A，30KW-4P QABP 225S4A，37KW-4P QABP 225M4A，45KW-4P QABP 250M4A，55KW-4P QABP 280S4A，75KW-4P QABP 280M4A，90KW-4P QABP 315S4A，110KW-4P QABP 315M4A，132KW-4P QABP 315L4A，160KW-4P QABP 315L4B，200KW-4P QABP 355M4A，250KW-4P QABP 355L4A，315KW-4P6P：QABP 71M6A，0.18KW-6P QABP 71M6B，0.25KW-6P QABP 80M6A，0.37KW-6P QABP 80M6B，0.55KW-6P QABP 90S6A，0.75KW-6P QABP 90L6A，1.1KW-6P QABP 100L6A，1.5KW-6P QABP 112M6A，2.2KW-6P QABP 132S6A，3KW-6P QABP 132M6A，4KW-6P QABP 132M6B，5.5KW-6P QABP 160M6A，7.5KW-6P QABP 160L6A，11KW-6P QABP 180L6A，15KW-6P QABP 200L6A，18.5KW-6P QABP 200L6B，22KW-6P QABP 225M6A，30KW-6P QABP 250M6A，37KW-6P QABP 280S6A，45KW-6P QABP 280M6A，55KW-6P QABP 315S6A，75KW-6P QABP 315M6A，90KW-6P QABP 315L6A，110KW-6P QABP 315L6B，132KW-6P QABP 355M6A，160KW-6P QABP 355M6B，200KW-6P QABP 355L6A，250KW-6PM2JA系列隔爆电机2P：M2JA 80M2A，0.75KW-2P M2JA 80M2B，1.1KW-2P M2JA 90S2A，1.5KW-2PM2JA 90L2A，2.2KW-2PM2JA 100L2A，3KW-2PM2JA 112M2A，4KW-2PM2JA 132S2A，5.5KW-2P M2JA 132S2B，7.5KW-2P M2JA 160M2A，11KW-2P M2JA 160M2B，15KW-2P M2JA 160L2A，18.5KW-2P M2JA 180M2A，22KW-2P M2JA 200L2A，30KW-2P M2JA 200L2B，37KW-2P M2JA 225M2A，45KW-2P M2JA 250M2A，55KW-2P M2JA 280S2A，75KW-2P M2JA 280M2A，90KW-2P M2JA 315S2A，110KW-2P M2JA 315M2A，132KW-2P M2JA 315L2A，160KW-2P M2JA 315L2B，200KW-2P M2JA 355M2A，250KW-2P M2JA 355L2A，315KW-2P4P：M2JA 80M4A，0.55KW-4P M2JA 80M4B，0.75KW-4P M2JA 90S4A，1.1KW-4PM2JA 90L4A，1.5KW-4PM2JA 100L4A，2.2KW-4P M2JA 100L4B，3KW-4PM2JA 112M4A，4KW-4PM2JA 132S4A，5.5KW-4P M2JA 132M4A，7.5KW-4P M2JA 160M4A，11KW-4P M2JA 160L4A，15KW-4P M2JA 180M4A，18.5KW-4P M2JA 180L4A，22KW-4P M2JA 200L4A，30KW-4P M2JA 225S4A，37KW-4P M2JA 225M4A，45KW-4PM2JA 280S4A，75KW-4P M2JA 280M4A，90KW-4P M2JA 315S4A，110KW-4P M2JA 315M4A，132KW-4P M2JA 315L4A，160KW-4P M2JA 315L4B，200KW-4P M2JA 355M4A，250KW-4P M2JA 355L4A，315KW-4PQAEJ系列进口制动电机2P：QAEJ 71M2A，0.37KW-2P QAEJ 71M2B，0.55KW-2P QAEJ 80M2A，0.75KW-2P QAEJ 80M2B，1.1KW-2P QAEJ 90S2A，1.5KW-2P QAEJ 90L2A，2.2KW-2P QAEJ 100L2A，3KW-2P QAEJ 112M2A，4KW-2P QAEJ 132S2A，5.5KW-2P QAEJ 132S2B，7.5KW-2P QAEJ 160M2A，11KW-2P QAEJ 160M2B，15KW-2P QAEJ 160L2A，18.5KW-2P QAEJ 180M2A，22KW-2P QAEJ 200L2A，30KW-2P QAEJ 200L2B，37KW-2P QAEJ 225M2A，45KW-2P4P：QAEJ 71M4A，0.25KW-4P QAEJ 71M4B，0.37KW-4P QAEJ 80M4A，0.55KW-4P QAEJ 80M4B，0.75KW-4P QAEJ 90S4A，1.1KW-4P QAEJ 90L4A，1.5KW-4P QAEJ 100L4A，2.2KW-4P QAEJ 100L4B，3KW-4P QAEJ 112M4A，4KW-4P QAEJ 132S4A，5.5KW-4P QAEJ 132M4A，7.5KW-4P QAEJ 160M4A，11KW-4P QAEJ 160L4A，15KW-4PQAEJ 180L4A，22KW-4P QAEJ 200L4A，30KW-4P QAEJ 225S4A，37KW-4P QAEJ 225M4A，45KW-4P6P：QAEJ 71M6A，0.18KW-6P QAEJ 71M6B，0.25KW-6P QAEJ 80M6A，0.37KW-6P QAEJ 80M6B，0.55KW-6P QAEJ 90S6A，0.75KW-6P QAEJ 90L6A，1.1KW-6P QAEJ 100L6A，1.5KW-6P QAEJ 112M6A，2.2KW-6P QAEJ 132S6A，3KW-6P QAEJ 132M6A，4KW-6P QAEJ 132M6B，5.5KW-6P QAEJ 160M6A，7.5KW-6P QAEJ 160L6A，11KW-6P QAEJ 180L6A，15KW-6P QAEJ 200L6A，18.5KW-6P QAEJ 200L6B，22KW-6P QAEJ 225M6A，30KW-6PMQAEJ系列进口制动电机2P：MQAEJ 71M2A，0.37KW-2P MQAEJ 71M2B，0.55KW-2P MQAEJ 80M2A，0.75KW-2P MQAEJ 80M2B，1.1KW-2P MQAEJ 90S2A，1.5KW-2P MQAEJ 90L2A，2.2KW-2P MQAEJ 100L2A，3KW-2P MQAEJ 112M2A，4KW-2P MQAEJ 132S2A，5.5KW-2P MQAEJ 132S2B，7.5KW-2P MQAEJ 160M2A，11KW-2P MQAEJ 160M2B，15KW-2P MQAEJ 160L2A，18.5KW-2P MQAEJ 180M2A，22KW-2P MQAEJ 200L2A，30KW-2P MQAEJ 200L2B，37KW-2P4P：MQAEJ 71M4A，0.25KW-4P MQAEJ 71M4B，0.37KW-4P MQAEJ 80M4A，0.55KW-4P MQAEJ 80M4B，0.75KW-4P MQAEJ 90S4A，1.1KW-4P MQAEJ 90L4A，1.5KW-4P MQAEJ 100L4A，2.2KW-4P MQAEJ 100L4B，3KW-4P MQAEJ 112M4A，4KW-4P MQAEJ 132S4A，5.5KW-4P MQAEJ 132M4A，7.5KW-4P MQAEJ 160M4A，11KW-4P MQAEJ 160L4A，15KW-4P MQAEJ 180M4A，18.5KW-4P MQAEJ 180L4A，22KW-4P MQAEJ 200L4A，30KW-4P MQAEJ 225S4A，37KW-4P MQAEJ 225M4A，45KW-4P6P：MQAEJ 71M6A，0.18KW-6P MQAEJ 71M6B，0.25KW-6P MQAEJ 80M6A，0.37KW-6P MQAEJ 80M6B，0.55KW-6P MQAEJ 90S6A，0.75KW-6P MQAEJ 90L6A，1.1KW-6P MQAEJ 100L6A，1.5KW-6P MQAEJ 112M6A，2.2KW-6P MQAEJ 132S6A，3KW-6P MQAEJ 132M6A，4KW-6P MQAEJ 132M6B，5.5KW-6P MQAEJ 160M6A，7.5KW-6P MQAEJ 160L6A，11KW-6P MQAEJ 180L6A，15KW-6P MQAEJ 200L6A，18.5KW-6P MQAEJ 200L6B，22KW-6P MQAEJ 225M6A，30KW-6P。