GA30 ,37 ,45 ,55,75零件手册
AG30 用户手册说明书
AG30 USER’S MANUAL30W A T m A n c e A m pw w w.a c o u s t i c a m p l i f i c a t i o n .c o mThree (3) Year Limited WarrantySubject to the limitations set forth below, Acoustic® hereby represents and warrants that the components of this product shall be free from defectsin workmanship and materials, including implied warranties of merchantability or fitness for a particular purpose, subject to normal use and service,for three (3) years to the original owner from the date of purchase.Retailer and manufacturer shall not be liable for damages based upon inconvenience, loss of use of product, loss of time, interrupted operationor commercial loss or any other incidental or consequential damages including but not limited to lost profits, downtime, goodwill, damage to orreplacement of equipment and property, and any costs of recovering, reprogramming, or reproducing any program or data stored in equipmentthat is used with Acoustic ® products. This guarantee gives you specific legal rights. You may have other legal rights which vary from stateto state. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.AcousticP .O. Box 5111Thousand Oaks, CA 91359-5111All trademarks and registered trademarks mentioned herein are recognized as the property of their respective holders.0804-8107.02FCC Statements1. C aution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority tooperate the equipment.2. N ote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses,and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.2AG30 USER’S MANUAL30 W A T T A c o u s T i c p e r f o r m A n c e A m pExposurE To high NoisE LEvELs maY CausE pErmaNENT hEariNg Loss. iNdividuaLs varY CoNsidErabLY To3IMpoRtANt SAfEty INStRUctIoNS93 95 110operating and maintenance (servicing) instructions in the literatureApparatus shall not be exposed to dripping or splashing. Objects filled with liquids, such as vases, shall not be placed on the apparatus.8. D o not install this product near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.9. D o not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-typeplug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If theprovided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10. P rotect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point wherethey exit from the apparatus. Do not break the ground pin of the power supply cord.11. Only use attachments specified by the manufacturer.12. U se only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, exercise caution whenmoving.13. Unplug this apparatus during lightning storms or when unused for a long period of time.14. Care should be taken so that objects do not fall and liquids are not spilled into the unit through the ventilation ports or any other openings.15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way.16. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.17. When a mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.18. An apparatus with CLASS 1 construction shall be connected to a MAINS socket outlet with a protective grounding connection.According to OSHA, any exposure in the above permissible limitscould result in some hearing loss. Hearing protection must beworn when operating this amplification system in order to preventpermanent hearing loss.w w w.a c o u s t i c a m p l i f i c a t i o n .c o m WarraNTY (2)imporTaNT safETY iNsTruCTioNs (3)WELComE (5)our missioN (5)a Word abouT Your amp (5)froNT paNEL (6)CabiNET fEaTurEs (7)spECifiCaTioNs (8)TakiNg CarE of Your NEW ampLifiEr ..............................8 tABLE of coNtENtS4AG30 USER’S MANUAL30W A T T A c o u s T i c p e r f o r m A n c e A m pwELcoME ANd coNGRAtULAtIoNS!Congratulations on your purchase of the AG30 acoustic performance amplifier. Founded as the Acoustic Control Corporation in Van Nuys, California in 1969, Acoustic has been the rig of choice for many legendary touring professionals. Acoustic amp users include some of music’s premier rock, jazz and funk players — and many original Acoustic rigs are still cranking out professional tones on stages world wide.Now you own a piece of the Acoustic legacy — so turn it up and enjoy what pros have known about for decades. Welcome to Acoustic, the Pro’s Tone™.oUR MISSIoNThe Acoustic design philosophy is simple. It’s simple to operate, simple to maintain, and its Fast-Tone™ technology allows you to dial up great sound in an instant. This way of thinking is part of every amp we make. That’s why many legendary musicians have used Acoustic to develop their trademark sounds.If you’re new to Acoustic amps, we encourage you to get in tune with its rich heritage and join the long line of Acoustic users who would never consider playing through anything else.A woRd ABoUt yoUR NEw AMpYour new Acoustic amplifier is designed to sound great with any acoustic instrument. We put a lot of thought and effort into selecting exactly the right components and designing a product that will be easy to adjust so you can quickly find the voice of your instrument and project it beyond your personal performance space.One example is the 8” studio monitor style speaker which has a polypropylene cone speaker with a rubber surround. This produces a very soft, warm, low frequency response. Additionally, the coaxial tweeter provides a chime-like clarity to your high frequencies.No matter what your style of playing or choice of acoustic instrument, you will find that your new amp will capture and project the very best of your musical voice.5w w w.a c o u s t i c a m p l i f i c a t i o n .c o m 6fRoNt pANEL1. Dual combination balanced XLR and 1/4” 2-conductor acoustic instrument inputs. These two inputs maybe used simultaneously and each have their own Volume control. You may plug an acoustic instrumentand/or microphone into either channel.2. Volume control. These controls adjusts the overall loudness of the individual channels of the amplifier.If your acoustic instrument has a preamp, you should set the volume control on your instrument at about half volume. You can then adjust the amplifier volume to your normal playing level and still have room to increase or decrease your volume as needed from the instrument.3. Low frequency control set to boost (15 dB) or cut (-15 dB) frequencies at 80 Hz. Controls the lowestfundamental frequencies to enhance the warmth and deep, full tones of your acoustic instrument.4. Midrange frequency control set to boost (15 dB) or cut (-15 dB) frequencies that you can sweep between500Hz and 1.2kHz. Moving the midrange frequency and either cutting or boosting this frequency willgive you maximum control over the body of your tone. This control can also be useful in eliminatingacoustic feedback. It also allows you to control the definition and voice of your acoustic instrument.5. High control set to boost (15 dB) or cut (-15 dB) frequencies at 10 kHz. Increasing this will enhance theclarity and brightness of your acoustic instrument.6. The Effect level control is used to determine how much of the selected effect is applied to your music.7. Effect Select control allows you to select from one of 16 different effects including reverbs, delays, chorusesand combinations of the above. The 16 effects are detailed in a printed chart on the top panel of the AG30.8. This 3-conductor 1/8” aux input jack will allow you to plug in a CD, MP3 player or any other source so youcan play along. To control the volume of this input, adjust the output volume of the device.9. This 1/8” 3-conductor jack is for plugging in headphones. When used, it will disconnect the internal speaker.10. The Line Out jack will provide an unbalanced, line-level signal which can be sent directly to a soundboard, live mixing console, a self-powered speaker or even another amplifier. You should always use a1/4” shielded cable (standard guitar cable) when using this output to connect to another device.11. Power LED. This light will illuminate with a soft blue color when the amp is turned on andready to play.AG30 USER’S MANUAL30 W A T T A c o u s T i c p e r f o r m A n c e A m p 75cABINEt fEAtURES Heavy-Weight cloth Grill 1Heavy-Duty 8” coax studio – monitor style speaker 2Angled monitor style cabinet projects sound upwards3rugged & comfortable Handle4easy to read control panel5protective, Long-Lasting covering 623146w w w.a c o u s t i c a m p l i f i c a t i o n .c o m 8SpEcIfIcAtIoNSModel AG30LocATion• To avoid deformation, discoloration, or more serious damage, do not expose the unit to direct sunlight, high temperature sources, or excessive humidity.poWer suppLY• Turn the power switch off when the AG30 is not in use.• The amplifier (main pug) should be unplugged from the AC outlet if the AG30 will not be used for an extended period of time.• Avoid plugging the amplifier (main plug) into an AC outlet that is also powering high consumption appliances such as electric heaters or televisions. Also avoid using multi-plug adapters since these can reduce sound quality, cause operation errors, and result in possible damage.• To avoid damage, turn off the AG30 power switch and all related devices prior to connecting or disconnecting cables.HAnDLinG AnD TrAnsporT• Never apply excessive force to any parts.• Unplug cables by gripping plugs firmly. Do not pull on cables.• Physical shocks caused by dropping or bumping can result in serious damage.cLeAninG• Clean with a dry, soft cloth.• A slightly damp cloth may be used to remove stubborn grime and dirt.• Never use cleaners such as alcohol or thinner.eLecTricAL inTerference• The AG30 contains electronic circuitry that may cause interference if placed too close to radio or television receivers. If this occurs, move the AG30 further away from the affected equipment.serVice AnD moDificATion• There are no user serviceable parts in the AG30.• Do not attempt to open the AG30 or make any change to circuits or parts. This will void the warranty.tAkING cARE of yoUR NEw AMpLIfIER。
超同步GA手册(完整资料).doc
【最新整理，下载后即可编辑】第一章序言感谢您购买北京超同步科技有限公司生产的BKS伺服控制器。
BKS伺服控制器是北京超同步科技有限公司研制、开发生产的高质量、多功能、低噪音的交流伺服控制器。
BKS伺服控制器是鼠笼式电机（IM）的伺服控制器，可对普通鼠笼式电机和变频电机的位置、转速、加速度和输出转矩通过编程方式进行控制，BKS伺服控制器的研制成功为传动控制领域带来了生机。
BKS伺服控制器核心采用32位CPU对电机全数字控制。
电机能够以极低的速度运行（1rpm甚至1/8rpm）。
具有RS232和RS422两种通讯接口，22KW以下内置制动单元。
具有按标准配置、用于定位的码盘接口和用于速度、位置跟随的第二码盘；用于顺序控制的12点输入、8点输出接口及模拟量输入输出接口等。
因此能实现对鼠笼式电机进行高性能的控制。
不仅能够满足普通变频器所能达到的技术指标，而且能够应用在例如数控铣床的进给轴这种要求定位精度非常高的领域。
在数控机床、电动汽车等领域应用前景十分广泛。
在使用BKS伺服控制器之前，请您仔细阅读该手册，以保证正确使用。
错误使用可能造成控制器运行不正常、发生故障或降低使用寿命，甚至发生人身伤害事故。
因此使用前应反复阅读本说明书，严格按说明使用。
本手册为随机发送的附件，务必请您使用后妥善保管，以备今后对控制器进行检修和维护时使用。
1.1开箱检查注意事项在开箱时，请认真确认：在运输中是否有破损现象；控制器铭牌的型号、规格是否与您的订货要求一致。
如发现有遗漏或不相符的情况，请速与供货商联系解决。
1.2 控制器的铭牌在控制器箱体的右下方，贴有标示控制器型号及额定值的铭牌，铭牌内容如图1-1所示1.3 控制器型号说明1.4 安全注意事项“危险”与“注意”的定义：危险! 如果没有按要求操作，可能造成严重设备损坏或人员伤害注意! 如果没有按要求操作，可能造成中等程度的人员伤害或轻伤，或造成物质损失图1-1 控制器的铭牌1.4.1 安装1.4.2 配线1.4.3 维护1.5 使用的注意事项1.5.1 关于电动机及机械负载1、与工频运行比较北科伺服控制器为电压型控制器，输出电压是PWM波，含有一定的谐波。
GA37-50VSD-2001-01
11
By-pass Omloopleiding Förbiledningskanal Umgehungsleitung Tuyaux de by-pass Tubería de derivación By-pass By-pass Tubagem de derivação Omløpsrør Ohitus -
GA37 VSD ................................................................
Service kits Service kits Service kits Service Kits Service kits Service kits Kit per la manutenzione Service kits Conjuntos de reparação Servicesett Huoltotarvikesarjat .........................................................
8
3
Air dryer connections Aansluitingen van de luchtdroger Lufttorkaranslutningar Anschlüsse des Lufttrockners Connexions du sécheur d’air Conexiones del secador de aire Connessioni del essiccatore d’aria Tilslutninger, køletørrer Ligações do secador de ar Lufttørkertilkoplinger Kuivaimen liitännät Full feature ....................................................................
阿特拉斯GA37
阿特拉斯 GA 37阿特拉斯GA系列微油螺杆式压缩机GA 37GA37 压缩机系列，占地面积小... 性能优越阿特拉斯·科普柯的 WorkPlace Air System? （工作现场型空气系统）提供无与伦比的用户价值。
通过此系统，您可以在使用时直接安装压缩机。
配置可选的内置式干燥器和附件的 GA30 系列变化多样，大小各异。
容量为 4.5－4.6 m3/min，最大工作压力为 7.5 － 13 巴。
型号为 50 Hz 和 60 Hz。
装成本低GA37WorkPlace Air System? （工作现场型空气系统）整体供货，可以实现现场的高效运行。
安装成本极低，是因为 GA 37具备：低噪音水平高效冷却风扇的配备和声振优化技术的应用大大降低了噪音水平，使得在工作现场安装压缩机成为可能。
优质空气产品的完美组合空气干燥器、压缩空气过滤器、冷凝水处理设备和储气罐都可以集成到压缩机组中。
这样可以降低安装成本并显著缩小所需的占地空间。
整体可靠性根据 ISO 9001 和 ISO 14001 设计制造，GA37系列符合业内最高质量标准。
所有装置均符合 ISO 1217, 第3 版, 附件 C – 1996 测试标准。
全球范围的销售和服务组织从概念到安装、从建议到预防性维护和保养活动，阿特拉斯·科普柯与您在维护生产过程的压缩空气领域中通力合作，帮助您生产及扩展业务以致成功。
X 透视图1.传动系统2.冷却风扇3. Elektronikon?控制器4.油气分离器及机油滤清器5.电气柜体6.干燥器阿特拉斯·科普柯获专利的电脑控制器是一种先进的微处理器为核心，直向用户的‘微处理操作系统，GA37采用Elektronikon I电脑。
可靠性友好的用户界面显示友好的服务数字监控通讯·借助于电脑显示屏上的维修保养提示和报警提示，预先对压缩机采取保施·如压缩机问题严重时可安全地关闭压缩机·如压缩机问题严重时可安全地关闭压缩机·精确的压力控制可达到最佳效率·DSS节能控制模式程序已设置在电脑控制器中，它可以将卸载功率消耗降到最低，节约能耗达10%·可根据需耍设置运行参数（,有口令保护）一工作压力一报警等级一维修保养等级一每周的定时开、停机设定·可在显示屏上读出历史数据和当前数据一下作压力，运行温度，电机起动次数，运行时间，维修保养信息一最后5次故障及紧急停机时的统计信息·Elektronikon I电脑普通型采用图标显示·Elektronikon II上厂提供中文，英文两种弭言选用·当压缩机需要保养时能自动显示以减少停机时间、简化保养计划·能远程对压缩机进行启停，加载、卸载等控制·能远程显示压缩机的运行、报警和故障等信息·CAN通讯接口（标准配置，用于阿特拉斯·科普柯』的ES集中控制系统连接）·ModBUS (ProfiBUS)通讯接口（可选配，能够与用户的集中控制系统相连接）·连接到因特网的E-box接口（可选配）可以被放置在靠近使用点- 最大限度地降低安装成本和减少空气泄漏的危险- 进一步降低噪音水平（63-68分贝）。
超同步GA手册
第一章序言感谢您购买超同步科技生产的BKS伺服控制器。
BKS伺服控制器是超同步科技研制、开发生产的高质量、多功能、低噪音的交流伺服控制器。
BKS伺服控制器是鼠笼式电机（IM）的伺服控制器，可对普通鼠笼式电机和变频电机的位置、转速、加速度和输出转矩通过编程方式进行控制，BKS伺服控制器的研制成功为传动控制领域带来了生机。
BKS伺服控制器核心采用32位CPU对电机全数字控制。
电机能够以极低的速度运行（1rpm甚至1/8rpm）。
具有RS232和RS422两种通讯接口，22KW以下内置制动单元。
具有按标准配置、用于定位的码盘接口和用于速度、位置跟随的第二码盘；用于顺序控制的12点输入、8点输出接口与模拟量输入输出接口等。
因此能实现对鼠笼式电机进行高性能的控制。
不仅能够满足普通变频器所能达到的技术指标，而且能够应用在例如数控铣床的进给轴这种要求定位精度非常高的领域。
在数控机床、电动汽车等领域应用前景十分广泛。
在使用BKS伺服控制器之前，请您仔细阅读该手册，以保证正确使用。
错误使用可能造成控制器运行不正常、发生故障或降低使用寿命，甚至发生人身伤害事故。
因此使用前应反复阅读本说明书，严格按说明使用。
本手册为随机发送的附件，务必请您使用后妥善保管，以备今后对控制器进行检修和维护时使用。
1.1开箱检查注意事项在开箱时，请认真确认：在运输中是否有破损现象；控制器铭牌的型号、规格是否与您的订货要求一致。
如发现有遗漏或不相符的情况，请速与供货商联系解决。
1.2 控制器的铭牌在控制器箱体的右下方，贴有标示控制器型号与额定值的铭牌，铭牌内容如图1-1所示1.3 控制器型号说明1.4 安全注意事项“危险”与“注意”的定义：危险!如果没有按要求操作，可能造成严重设备损坏或人员伤害注意!如果没有按要求操作，可能造成中等程度的人员伤害或轻伤，或造成物质损失控制器型号 适配电机容量额定输出电压、电流和频率 额定输出容量、电流，频率X 围与电压图1-1 控制器的铭牌1.4.1 安装1.4.2 配线1.4.3 维护1.5 使用的注意事项1.5.1 关于电动机与机械负载1、与工频运行比较北科伺服控制器为电压型控制器，输出电压是PWM波，含有一定的谐波。
阿特拉斯GA11-15-18-22零件手册 最新
Atlas Copco Stationary Air CompressorsGA11, GA15, GA18, GA22Elektronikon I regulator Pack/Pack Full-featureParts listFrom following serial No. onwards:WUX – 23xxxx• Copyright 2008, Atlas Copco Airpower n.v., Antwerp, Belgium.Any unauthorized use or copying of the contents or any part thereof is prohibited.This applies in particular to trademarks, model denominations, part numbers and drawings.• Use only authorized parts. Any damage or malfunction caused by the useof unauthorized parts is not covered by Warranty or Product Liability.No. 9829 3071 502008-10 Parts list Contents0Drive arrangement (1)Air system - Air Inlet (2)Air flow (3)Unloader Valve (4)Oil system – Oil circuit (5)Oil System – Oil vessel connections (6)Regulating system (7)Air Outlet - Pack (8)Air Outlet - FF (9)Air dryer (10)Bodywork (11)Start cubicle – Star / Delta (12)Heavy duty filter (13)Service Kits (14)2 9829 3071 50Parts list1 Drive arrangementRef. Partnumber Qty Name Remarks Ref. Partnumber Qty Name Remarks 1010 1616 6712 90 1 Service stage 3010 1 Gear wheel set2010 1622 0007 00 1 Gear casing 1625 0020 17 GA11-7.5 bar(e)2015 0663 2103 22 1 O-ring 1625 0020 27 GA11-8.5 bar(e)2020 0147 1364 03 8 Hexagon bolt 1625 0020 06 GA11-10 bar(e)2025 0101 1951 40 2 Pin 1625 0020 15 GA11-13 bar(e)2030 1622 3400 00 1 Spacer 1625 0020 19 GA15-7.5 bar(e)2035 0147 1368 03 1 Hexagon bolt 1625 0020 07 GA15-8.5 bar(e)2040 0337 0009 42 1 Parallel key 1625 0020 18 GA15-10 bar(e)2041 0337 0009 45 1 Parallel key 1625 0020 17 GA15-13 bar(e)2045 1622 0009 00 1 Bushing 1625 0020 25 GA18-7.5 bar(e)2050 1616 5742 00 1 Seal ring 1625 0020 11 GA18-8.5 bar(e)2055 1622 0010 00 1 Washer 1625 0020 20 GA18-10 bar(e)2060 0147 1478 03 1 Hexagon bolt 1625 0020 07 GA18-13 bar(e)2065 0147 1475 03 4 Hexagon bolt 1625 0020 12 GA22-7.5 bar(e)2070 1613 6752 01 2 Antivibr. pad 1625 0020 22 GA22-8.5 bar(e)2075 0147 1363 03 2 Hexagon bolt 1625 0020 25 GA22-10 bar(e)2080 0301 2344 00 2 Washer 1625 0020 02 GA22-13 bar(e)2100 16619 2766 00 6 Bolt 4070 1 Motor2115 1092 0010 60 2 Nipple 1091 6340 04 GA111091 6341 04 GA151091 6342 04 GA181091 6343 04 GA229829 3071 50 3Parts list Air system – Air Inlet2Ref. Partnumber Qty Name Remarks Ref. Partnumber Qty Name Remarks1010 1622 0004 00 1 Air Filter1202 8040 02 1 Filter element 1015 1622 4741 00 1 Elbow1020 1622 4780 00 1 Tube1025 0347 6114 00 3 Hose clip1030 1622 1713 82 1 Assembly Unloader 1035 1622 7811 00 1 Gasket1040 0147 1325 03 4 Hexagon bolt 1045 0301 2335 00 4 Washer3010 1622 0014 01 1 Housing3015 0663 2111 35 3 O-ring3020 0663 7134 00 1 O-ring3025 0147 1329 03 2 Hexagon bolt 3030 0147 1335 03 2 Hexagon bolt 3035 0301 2335 00 4 Washer3040 0571 0035 96 1 Nipple3045 0663 3125 00 1 O-ring3050 1622 3648 20 1 Nipple3051 0663 3119 00 1 O-ring3055 1613 9005 01 1 Valve3060 0663 2108 11 1 O-ring3220 0581 0001 02 1 Nipple3221 0661 1000 40 1 Seal washer 4045 1089 0574 55 1 Temp. sensor 4050 1089 0702 09 1 Solenoid valve 5005 1088 1001 01 1 Warning mark4 9829 3071 50Parts list3 Air flowRef. Partnumber Qty Name Remarks Ref. Partnumber Qty Name Remarks1070 1622 0015 00 1 Hose assembly 1075 0663 7134 00 2 O-ring1080 0147 1325 03 4 Hexagon bolt 1085 0301 2335 00 4 Washer1215 0070 6002 05 AR Plastic tube 2005 1092 0015 73 1 Hose assembly 2010 1 Plate1622 0110 00 GA111622 0111 00 GA151622 0112 00 GA182015 0147 1963 08 4 Hexagon bolt 2025 0147 1963 08 4 Hexagon bolt 2030 1622 0012 00 1 Spacer2035 0147 1376 03 1 Hexagon bolt 2040 1613 6752 17 1 Antivibr. Pad 2060 1619 5188 00 AR Seal3005 1 Combi-cooler 1622 0941 00 GA111622 0942 00 GA151622 0943 00 GA181622 0944 00 GA223010 0686 3716 01 1 Hexagon bolt 3015 0653 1062 00 1 Flat gasket9829 3071 50 5Parts list Unloader Valve4Ref. Partnumber Qty Name Remarks Ref. Partnumber Qty Name Remarks1005 1622 1713 00 1 Housing 1010 1622 1717 00 1 Cover1015 0335 2164 00 1 Circlip1025 1622 1755 80 1 Valve ass’y 1035 1622 1773 00 1 Rod1040 0261 1090 86 1 Nut1045 1622 1789 00 1 Piston1050 1622 1790 00 1 Guidance tape 1055 1622 1797 00 1 Bushing 1060 1622 1798 00 1 Quad-ring 1065 0663 2104 98 1 O-ring1070 0160 0996 86 1 Cross rec screw1075 0301 2318 00 1 Washer1080 1622 3694 80 1 Assembly1081 0663 2111 55 1 O-ring1085 1622 2906 00 1 Bushing1090 1622 2905 00 1 High temperature sealing 1095 1622 2904 00 1 Spring1100 1622 2903 00 1 Spring guide6 9829 3071 50Parts list5Oil system – Oil circuitRef. PartnumberQty Name RemarksRef. Partnumber Qty Name Remarks1025 1 Hose assembly1092 0015 78 GA11 1092 0015 78 GA15 1092 0015 79 GA18 1092 0015 79 GA221030 1092 0015 771Hose assembly2085 1088 0019 01 2 Contact washer 2088 1613 8967 03 1 Grounding of vessel 2089 0226 0301 00 1 Tapping screw 2135 1092 0015 76 1 Hose assembly 2205 1092 0015 80 1 Hose assembly 22901092 0015 761Hose assembly9829 3071 50 7Parts list Oil System – Oil vessel connections68 9829 3071 50Parts list9829 3071 50 96Oil System – Oil vessel connectionsRef. PartnumberQty NameRemarks Ref. PartnumberQty NameRemarks1010 1092 0003 52 1 Oil vessel 2090 2235 2544 00 4 Damper 2095 0266 2110 00 4 Nut 2100 0300 0274 34 4 Washer 2105 1202 8992 00 1 Plug 2110 0663 2102 15 1 O-ring 2115 1092 0000 72 1 Sight glass 2120 0605 9500 09 1 Elbow 2125 1079 5840 27 1 Nipple2130 0661 1000 43 1 Seal washer 2139 1503 2565 04 1 Elbow2140 0603 4100 17 1 Hexagon nipple 2145 0852 0010 36 1 Ball valve 2150 0686 3718 24 1 Plug2160 1622 4700 50 1 Instrument block 2165 0663 3128 00 1 O-ring2170 0147 1342 03 3 Hexagon bolt 2175 0301 2335 00 3 Washer2180 1622 0351 01 1 Oil separator 2185 1622 0338 00 1 Coupling 2190 1622 0337 00 1 Pipe 2195 0571 0035 93 1 Nipple 2200 0663 3119 00 1 O-ring2210 0581 1200 37 1 Elbow coupling 2225 0563 3106 03 1 Bend2235 1613 6883 03 1 Valve housing 2240 0147 1362 03 2 Hexagon bolt 2245 0301 2344 00 2 Washer 2250 1613 6105 01 1 Oil filter 22551619 3770 001Nipple 2260 1614 6118 00 1Flange 2265 0663 2101 95 1 O-ring2270 0147 1246 03 2 Hexagon bolt 2275 0301 2321 00 2 Washer 2280 0571 0035 97 4 Nipple 2285 0663 2113 37 4 O-ring 3010 1 Housing1513 0539 00 7.5-8.5-10 bar(e) 1622 0257 00 13 bar(e) 3015 0661 1000 44 1 Seal washer 3020 1 Spring1513 0063 00 7.5-8.5-10 bar(e) 1622 0259 00 13 bar(e) 3025 1513 0402 01 1 Piston 3030 0663 2105 40 1 O-ring 3035 1513 0064 00 1 Spring 3040 1513 0401 01 1 Valve disc 4015 1 Safety valve 0832 1000 77 7.5 bar(e) 0832 1000 78 8.5 bar(e) 0832 1000 78 10 bar(e) 0832 1000 79 13 bar(e)4025 1 Thermostatic valve 1622 7064 01 7.5 bar(e) 38℃ 1622 7064 01 8.5 bar(e) 38℃ 1622 7064 01 10 bar(e) 38℃ 1622 7064 02 13 bar(e) 65℃ 5020 1 Oil label1079 9909 57 Label Rotoinject Fluid1079 9925 87Label Roto-Xtend Duty FluidParts list Regulating system7Ref. Partnumber Qty Name Remarks Ref. Partnumber Qty Name Remarks1020 1900 0712 71 1 Regulator I+ 1021 0147 1169 03 4 Hexagon bolt 1022 0301 2315 00 4 Washer1035 1089 0575 54 1 Pressure transducer 2010 1092 0015 31 1 Ball valve 2065 1622 2818 00 1 Adapter 2070 0697 9809 05 1 Nut10 9829 3071 508 Air Outlet - PackRef. Partnumber Qty Name Remarks Ref. Partnumber Qty Name Remarks1010 1092 0015 74 1 Pipe1015 0301 2335 00 2 Washer1020 0147 1961 84 2 Hexagon bolt 1080 1092 0015 24 1 Baffle assembly 1) 1085 0147 1963 08 4 Hexagon bolt 1) Linedwith:Foam: 0395 6001 66 (AR) 25x2040x1650Ref. Partnumber Qty Name Remarks Ref. Partnumber Qty Name Remarks1005 << >> 1 Air dryer 1015 1092 0015 26 1 Baffle1025 << >> 1 Dryer rail 2015 1619 2765 01 3 Screw2025 1619 2766 00 4 Bolt2030 1092 0015 75 1 Hose assembly 2035 2 Nipple2250 4983 00 A6X0571 0035 90 A7X 2040 2 Washer 0661 1000 44 A6X0661 1000 61 A7X2042 1092 0016 76 1 Pipe2045 0147 1961 84 2 Hexagon bolt 2050 0300 0274 34 2 Washer 2070 0070 6002 05 AR Plastic tube 2075 0581 0000 35 1 Coupling10 Air dryerRef. Partnumber Qty Name Remarks Ref. Partnumber Qty Name Remarks8102 1369 94 GA11 A6X 50Hz8102 1369 94 GA15 A6X 50Hz8102 1368 79 GA18 A7X 50Hz8102 1368 79 GA22 A7X 50Hz 1010 1 Heat exchanger 2202 7366 02 A6X2202 7367 02 A7X1020 2202 7324 02 1 Hot Gass By-Pass valve 1030 1 Refr. Compressor 2202 7370 02 A6X2202 7370 03 A7X 1040 2202 7440 01 1 Electric drain 1050 1 Condenser unit 2202 7351 02 A6X2202 7352 01 A7X1060 1089 9139 02 1 Pressure switch 1070 1 Fan assembly 2202 7373 01 A6X2202 7373 02 A7X11 BodyworkRef. Partnumber Qty Name Remarks Ref. Partnumber Qty Name Remarks 1015 1622 0136 00 1 Support1020 1619 2766 00 4 Bolt1025 1092 0015 22 1 Panel assembly 1) 1030 1619 2766 00 2 Bolt1035 1092 0015 19 1 Support1040 1619 2766 00 2 Bolt1050 0147 1960 38 4 Hexagon bolt1055 0147 1963 08 6 Hexagon bolt1065 1202 6400 00 2 Hinge1070 0147 1244 03 2 Hexagon bolt1075 0301 2321 00 2 Washer1080 1092 0015 21 1 Panel assembly 1) 1085 1619 2766 00 2 Bolt1090 1092 0015 29 1 Roof assembly 1) 1613 9963 00 4 Corner0129 3174 00 8 Blind rivet1095 0147 1963 08 5 Hexagon bolt1100 1092 0015 30 1 Plate assembly 1) 1105 1619 2766 00 1 Bolt1110 0147 1963 08 4 Hexagon bolt1115 1092 0015 25 2 Panel assembly 1) 1513 0431 00 1 Door lock0690 1116 01 1 House mark1120 1092 0015 23 1 Panel assembly 1) 1079 9901 18 1 Warning label1619 2665 00 AR Seal1125 1619 2766 00 1 Bolt1140 0266 2110 00 1 Nut1145 0333 3227 00 1 Lock washer1150 0301 2335 00 1 Washer1155 0129 3107 00 4 Blind rivet1160 1089 9068 01 2 Key1165 1089 9154 02 1 Key1170 1088 1301 02 1 Cable strip1175 0147 1963 08 4 Hexagon bolt 1180 1092 0015 27 1 Door panel1616 2987 00 2 Plug1513 0431 00 1 Door lock1200 1092 0015 28 1 Baffle assembly 1) 1205 0147 1963 08 2 Hexagon bolt1210 1619 3843 00 AR Seal2010 1092 0015 20 1 Frame1622 0598 81 1 Door assembly 1) 3005 1622 0598 10 1 Door panel3010 1079 9903 48 1 Warning label3015 1079 9960 09 1 Label3020 1088 1001 03 1 Warning mark3025 1619 7705 00 1 Lock3030 1089 9125 05 1 Round disk3035 1079 9920 93 1 Label4080 1622 0104 02 1 Fan assembly5010 1079 9903 48 2 Warning label5025 1088 1001 01 2 Warning mark5030 1503 0786 00 2 Rotation arrow6010 1 Decal1622 4631 47 GA111622 4631 47 GA11 FF1622 4631 47 GA151622 4631 47 GA15 FF1622 4631 47 GA181622 4631 47 GA18 FF1622 4631 47 GA221622 4631 47 GA22 FF6015 1091 6096 00 1 Data plate1) Lined with: Foam: 0395 6001 66(AR)25x2040x165012Start cubicle – Star / Delta125012101245117011711175118512551100114811471146113511401145Ref. Partnumber Qty Name Remarks Ref. Partnumber Qty Name Remarks1Electr.panel 1092 0015 66 GA111092 0015 67 GA151092 0015 68 GA181092 0015 69 GA221040 1092 0021 54· 1 Connector 1050 1092 0021 55· 1 Connector 1075 1092 0021 56· 1 Connector 1100 1092 0021 51· 8 Terminal1105 1092 0021 50· 1 Terminal1115 1092 0021 52· 1 Pushbutton 1135 1092 0021 48· 3 Fuseholder 1140 1092 0021 58· 1 Fuse1145 1092 0021 57· 2 Fuse1146 1092 0021 59· 2 Fuse1147 1092 0021 60· 1 Fuse1148 1092 0021 49· 3 Fuseterminal 1170 1092 0021 47· 1 Relay1171 1092 0021 44· 1 Socket1175 1092 0021 43· 2 Contactblock 1180 · 1 Contact1092 0021 61 GA111092 0021 62 GA151092 0021 63 GA181092 0021 63 GA221185 · 2 Contact1092 0021 62 GA111092 0021 63 GA151092 0021 64 GA181092 0021 65 GA221205 1092 0021 45· 1 Circuitbreaker 1210 1092 0021 53· 3 Supplyterminal 1215 · 1 Overloadrelay1092 0021 66 GA111092 0021 67 GA151092 0021 67 GA181092 0021 68 GA221220 · 1 Transformer1092 0021 69 GA111092 0021 69 GA151092 0021 69 GA181092 0021 70 GA221225 1092 0021 69· 1 Phase seq relay1235 1622 0005 41· 1 Wiring1245 9139 5000 16· AR Rail1250 9829 3002 82· 1 Servicediagram1255 · ARDryerrail 9829 3002 83· 1 Assemblydrawing 2010 1092 0015 32·· 1 Cubicle2015 1202 6584 00·· AR Seal2025 0268 7110 00·· 2 Nut2030 0300 0275 05·· 2 Washer2035 0301 2335 00·· 2 Washer2040 0333 2174 37·· 2 Springwasher13 Heavy duty filterRef. Partnumber Qty Name Remarks Ref. Partnumber Qty Name Remarks8092 2455 32 1 Heavy duty filter 1020 1622 0175 00 1 Hose assembly 1030 0147 1327 03 2 Hexagon Bolt 1035 0301 2355 00 2 Washer1040 0266 2110 00 2 Nut1622 0170 81 1 Air filter ass’y 2025 1622 0172 00 1 Clamp2030 1622 0173 00 1 Adapt 2035 1622 0174 00 1 Elbow2040 0347 6114 00 2 Hose clip1622 0170 80 1 Air filter ass’y 3020 1622 0170 00 1 Air filter 3025 1622 0171 00 1 Filter element 4065 0347 6114 00 2 Hose clip 5060 1503 1056 00 AR SealRef. Partnumber Qty Name Remarks Ref. Partnumber Qty Name Remarks2902 0161 00 1 Unloader kit1622 1755 80· 1 ValveAss’yC771622 1755 00· 1 ValveC771622 3694 80· 1 Blow off valve1622 3694 00·· 1 Housing1622 3694 01·· 1 Cover1622 3694 02·· 1 Piston1513 0447 00·· 1 Pistonring1622 3694 03·· 1 Seal1622 3694 04·· 1 Seal1622 3694 05·· 1 Rivet1622 3694 06·· 2 Insert1622 3694 07·· 1 Glideseal0226 3300 18·· 4 Bolt0663 2112 69·· 1 O-ring1622 1797 00· 1 Bushing1622 1790 00· 1 GuidanceTapeC77Unloader1622 1798 00· 1 Quad-ringC77Unloader0663 2104 98· 1 O-ring1622 2906 00· 1 High Temperature Sealing Vqb221622 2904 00· 1 SpringVqb221622 2903 00· 1 SpringGuideVqb220301 2318 00· 2 Washer0160 0996 86· 2 Cross Rec Screw0663 2111 55· 1 O-ring0663 7142 00· 1 O-ring0211 1957 50· 1 Screw0661 1000 40· 1 SealWasher9820 3654 00· 1 InstructDrwg2901 1399 00 1 Min. Pressure Valve kit7.5-8.6-10bar(e)/100-125-150psig 1513 0401 01· 1 ValveDisc1513 0064 00· 1 Spring0663 2105 40· 1 O-ring1513 0063 00· 1 Spring0661 1000 44· 1 Sealwasher2904 1015 00· 1 MinPressValveInstruction2901 1411 00 1 Min. Pressure Valve kit13bar(e)/175psig1513 0401 01· 1 ValveDisc1513 0064 00· 1 Spring0663 2105 40· 1 O-ring1622 0259 00· 1 Spring0661 1000 44· 1 Sealwasher2904 1015 00· 1 MinPressValveInstruction 2901 0245 01 1 Oil CanRoto-Inject Fluid 5L2901 0522 00 1 Oil CanRoto-Inject Fluid 20L2901 0866 01 1 Filter Kit1613 8720 00· 1 Filterelement1613 6105 01· 1 Oilfilter1622 0351 01· 1 OilSeparator9820 4572 00· 1 Filter Kit Instruction2901 0850 00 1 Element mounting kit 0661 1000 38· 1 Sealwsher0661 1000 39· 1 Sealwsher0663 2103 22· 1 O-ring0663 2107 78· 3 O-ring0663 7134 00· 3 O-ring0663 7142 00· 1 O-ring2901 0709 00 1 Elem.Overh.Kit0663 2107 37· 1 O-ring0663 2106 67· 1 O-ring0508 1108 00· 1 Bearing0508 1100 46· 1 Bearing0504 0200 14· 1 BallBearing0663 7139 00· 1 O-ring0504 0605 00· 1 BallBearing0663 2108 34· 1 O-ring1616 6267 70· 1 Spacer1616 6273 70· 1 Spacer2901 0068 00 1 Thermostatic valve Kit 38℃1622 7064 01· 1 Thermostatic valve 38℃0663 2101 95· 1 O-ring9820 4573 00· 1 ThermostatValveKit 2904 0036 02· 1 ThermostaticValveKit 2901 0069 00 1 Thermostatic valve Kit 65℃1622 7064 02· 1 Thermostatic valve 65℃0663 2101 95· 1 O-ring9820 4573 00· 1 ThermostatValveKit 2904 0036 02· 1 ThermostaticValveKitParts listNotes:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9829 3071 50 21Parts listNotes:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 9829 3071 50。
高压空压机零部件手册
15830276 对丝
1-29
21981311 电磁阀
1-30
32001729 排气单向阀
1-31
95098265 弯头
1-32
95038147 管径衬套
1-33
37129004 后冷却器翅片管
1-34
37179926 排气安全阀
1-35
95040341 弯头接管-2000PSIG
1-36
30214738 对丝
CCN
95053070 95043196 95094298 30822928 30218242 37106176 21982350 21993225 21993530 21994918 21992805 95101457 32024697 32024689 95083143 95002168 30345185 37128964 37185360 30294870 30221121
进气消声过滤器部件
1-2
37152196
管道部件-气缸/排气口
1-3
37152154
管道部件-放空阀/中冷器压力表
1-4
32110934
管道部件-低压气缸至曲轴箱
1-5
30335525
后冷却器翅片管
1-6
95098265
弯头
1-7
95229571
管接头
1-8
31385511
安全阀
1-9
32179046
六角头螺栓
1-36
37130655
气缸盖-高压端
1-37
31517725
气阀部件 20
1-38
30294284
气缸盖垫片
1-39
95053567
GAVSD全系列1
Traditional vs VSD
节省能源 加/卸载控制 VSD控制
Precise pressure
40
30 20 10 0 0 12.5 25 40
50 FAD [%]
60
75
80
100
Introduction
Benefits
Installation
Service
Other Information
Versions
Options
Pages
Introduction
Benefits
Installation
Service
Other Information
Chapter Performance Operating Principle
变频式喷油螺杆压缩机
Control System
Monitoring System
GA75VSD 1.9-13.1 m³ /min 调节区间14.5-100%
GA50(55)VSD 1.3-9.1 m³ /min 调节区间14.3-100% GA37VSD 1.3-6.9 m³ /min 调节区间18.8-100% GA30VSD 1.0-4.6 m³ /min 调节区间22-100%
GA180VSD气量和压力范围
Chapter Performance Operating Principle
P (bar)
气量范围 : 6 – 28.9 m3/min 压力 : 4 - 13 bar
Control System
20
Monitoring System
Versions
13
Options
10
Introduction
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
内容
零件清单
目录
压缩机机头和传动齿轮 1 .............................................................................................................................. 空气进气 2 ....................................................................................................................................................................................
卸荷阀 3 .................................................................................................................................................................................. 储气罐 4 ..................................................................................................................................................................................
电控柜
-
CSA/UL 17 ................................................................................................................................................................................
-
GA (W) 6 ......................................................................................................................................................................
箱体 19 ............................................................................................................................................................................... 维修包 20 .........................................................................................................................................................................
数量 1 1 1 1 1 2 12 1 2 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1
名称
维修机头 轴套 平键 轴 六角螺栓 销 六角螺栓 O 形圈 螺O 形纹圈接头 喷油嘴 六角螺栓 六角螺塞 密封垫圈 排污接头 卡簧 GA 30+ GA 37+ GA 45+ GA 55 GA 75
气流及冷却系统
-
GA (A) 5 ......................................................................................................................................................................
9829 3000 72
3
1
零件清单
63297_01
4
9829 3000 72
零件清单
压缩机机头和传动齿轮
1
编号 零件号 1010 1616 7281 90 1020 1622 6600 00 1030 0337 6051 00 1040 1092 0000 83 1050 0147 1409 03 1060 0101 1951 40 1070 0147 1364 03 1080 0663 2103 22 1090 1619 6032 00 1100 0663 2107 84 1110 1622 5542 00 1120 0147 1321 03 1130 0686 3716 01 1140 0661 1000 38 2010 1622 3740 00 2020
-
IEC 18 ........................................................................................................................................................................
1092 0212 00 1092 0212 00 1092 0212 00 1092 0213 00 1092 0213 00 2030 0508 1100 34 0508 1100 34 0508 1100 34 0508 1100 98 0508 1100 98 2040 1622 4628 00 1622 4628 00 1622 4628 00 1616 5517 00 1616 5517 00 2050 1092 0175 00 1092 0175 00 1092 0175 00 1092 0176 00 1092 0176 00 2060 0147 1477 03 2070 1619 6032 00 2080 1622 3106 00 1622 3106 00 1622 3106 00 1622 3665 00 1622 3665 00 2090 0337 0009 69 2100 1092 0900 14 1092 0900 16 1080 4213 02 1092 0900 12 1080 4213 13 1092 0900 07 1092 0900 12 1080 4213 06
空气出气
-
P 型 - GA (A) 8 ...............................................................................................................................................
轴GA承30+ GA 37+ GA 45+ GA 55 GA 75
密GA封30+ GA 37+ GA 45+ GA 55 GA 75 齿轮箱 GA 30+ GA 37+ GA 45+ GA 55 GA 75
六螺角纹螺接栓头(spm) G轴A套30+ GA 37+ GA 45+ GA 55 GA 75 键 G电A机30+ (A/W) IEC 200V/50Hz GA 30+ (A/W) CSA/UL 200V/60Hz GA 30+ (A/W) IEC 230V/50Hz GA 30+ (A/W) IEC 230V/60Hz GA 30+ (A/W) IEC 380V/60Hz GA 30+ (A/W) IEC 400V/50Hz GA 30+ (A/W) CSA/UL 460V/60Hz GA 30+ (A/W) IEC 500V/50Hz
喷油系统 7 .........................................................................................................................................................................
- 全性能型 - GA (A) 10 ...............................................................................................................................
- 全性能型 - GA (W) 11 ..............................................................................................................................
2
9829 3000 72
零件清单
空气冷干机
- 全性能型 - 12 .......................................................................................................................................................
备注
编号 零件号 1080 4213 14 1092 0901 14 1092 0901 16 1080 4214 02 1092 0901 12 1080 4214 13 1092 0901 07 1092 0901 12 1080 4214 06 1080 4214 14 1092 0902 14 1092 0902 16 1080 4247 02 1092 0902 12 1080 4247 13 1092 0902 07 1092 0902 12 1080 4247 06 1080 4247 14 1080 4241 61 1080 4241 52 1092 0903 12 1080 4241 53 1092 0903 05 1092 0903 12 1080 4241 56 1080 4241 64 1080 4242 61 1080 4242 52 1092 0904 12 1080 4242 53 1092 0904 05