数字便携式超声波探伤仪OTD-3000
便携式监测仪培训奥德姆
仪器简介
产品用途： 各类石油、石化、化工生产装置区。 消防、燃气、煤炭、冶金、电力安全检测。 市政、电信、交通隧道施工安全检测。 船舶制造、电子、半导体工业。 医药生产、卫生防疫调查。 其他存在有毒有害气体的场所。 技术参数： 检测气体：二十几种可燃气体（O2、CO、H2S、SO2、NO、NO2、CL2、HCL、HCN、NH3 、H2、ETO、ASH3、PH3、SIH4、COCL2、O3、HF、CLO2、CO2、CAT） 配 置：1个可燃气通道3个其它毒气通道（根据生产装置区有毒有害气体介质的不同进行配置——可选） 测 量：连续
标准模式状态开机（推荐用） 直接按压“ON/OFF/ENTER”键，仪器进入几秒钟的声光测试状态后显示： ——OLDHAM标记 ——软件的版本，日期、记录和连续的数字 ——每通道设置的瞬时报警极限 ——测量现在进行 说明：当仪器开机时，声光信说明仪器的开机是正常的，需要时这个信号可以消除或信号间的间隔可以修改。 可燃气体参数选择方式开机 按下“背光灯”或“确认报警键”后，按压“ON/OFF/ENTER”键开机。并同时释放这两键。 显示OLDHAM标记，并执行几秒钟的自检操作。 然后显示设置气体列表，暗色区域表示选择的气体。
奥德姆公司催化燃烧原理上有两大特点： 1．高纯度的催化剂，使得输出信号更加准确，精度较高：±1% 重复性：±1% 2．螺旋装检测元件（铂金丝）涂的催化剂较多，延长了检测元件的使用寿命，长达4年
2.毒气传感器为电化学反应原理 ：——电化学反应。在一个电解槽里充满了对相应气体起氧化还原反应的电解液，当有对应气体进入电解槽时，在电极上发生氧化还原反应，使两个电极之间电平衡被打破，气体越多，电平衡越失衡，所以电极之间的电压差越大，通过仪器内部运算，反映到液晶显示面板的数字越大。 其中氧气测量值以%VOL为单位；其它毒气测量值以PPMVOL为单位。 重要提示：仪器的传感器必须在开机前连接以防损坏；不得在检测工作场所更换传感器以适应防暴的要求。 电化学反应原理上有两大特点： 电解液为糊糊状，而不是其它产品的液态。这样既可以减少电解液的泄漏，又可以减少电解液的蒸发，同时性能稳定。 因为电化学传感器都有干扰这一缺点，奥德姆产品已经考虑了这一因素，在仪器软件设置上已经考虑这一影响，可以很大程度上消除这一影响。
便携式超声波探伤仪
基本概述便携式超声波探伤仪又叫便携式焊缝超声波探伤仪、便携式超声波探测仪、便携式超声波探伤仪价格、便携式超声波探伤仪厂家、便携式钢轨超声波探伤仪、便携式钢结构超声波探伤仪、便携式超声波焊缝检测仪、数字焊缝测量仪、便携式数字焊缝测试仪、人防钢结构焊缝探伤仪、数字式超声波探伤仪、焊缝数字超声波探伤仪、锻钢超声探伤仪、金属焊缝超声波探伤仪、焊缝裂纹探伤仪、全数字式超声波探伤仪、超生波探伤仪、数字型超声波探伤仪、超声波数字探伤仪、超声波探伤仪标准试块、铸件超声波探伤仪、超声波检测仪、超声金属探伤仪、数字超声波探伤仪、金属超声波探伤仪、超声波探伤仪工作原理、便携式探伤仪、超声波探伤仪试块、便携式超声波探伤仪、数字式超声波探伤仪、超声波探伤仪厂家、超声波焊缝探伤仪、焊缝超声波探伤仪、求购超声波探伤仪、全数字超声波探伤仪、超声波探伤仪排名、超声波探伤仪价格、超声波探伤仪、钢轨超声波探伤仪、超声波探伤方法、超声波探伤仪多少钱、数字式探伤仪、智能超声波探伤仪、超声波无损探伤仪、河北超声波探伤仪、数字超声波探伤、是一种便携式工业无损探伤仪器，它能够快速、便捷、无损伤、精确地进行工件内部多种缺陷（裂纹、疏松、气孔、夹杂等）的检测、定位、评估和诊断。
既可以用于实验室，也可以用于工程现场。
广泛应用在锅炉、压力容器、航天、航空、电力、石油、化工、海洋石油、管道、军工、船舶制造、汽车、机械制造、冶金、金属加工业、钢结构、铁路交通、核能电力、高校等行业。
目录序言 (3)1简介 (4)1.1 功能特点 (4)1.2 主要技术参数 (5)1.3 仪器整机 (6)1.4 仪器主机 (6)1.5 显示界面 (7)1.6 按键与旋轮 (7)1.7 指示灯 (8)2仪器操作 (9)2.1 供电电源 (9)2.2 电池充电 (9)2.3 连接探头 (11)2.4仪器开、关机 (11)2.5按键、旋轮操作模式 (11)2.6 参数调节方法 (12)2.7检测范围调节 (12)2.8声速调节 (13)2.9显示平移 (13)2.10增益调节 (14)2.11闸门调节 (15)2.12探头阻尼 (17)2.13脉冲幅度 (17)2.14脉冲宽度 (17)2.15重复频率 (17)2.16探头类型 (17)2.17检波方式 (18)2.18信号抑制 (18)2.19探头频率和晶片尺寸 (18)2.20探头前沿 (19)2.21零偏调节 (19)2.22探头K值（探头角度） (19)2.23自动波高 (20)2.24坐标网格 (20)2.25单位制 (20)2.26声程标度 (20)2.27波形填充 (20)2.28屏幕亮度 (21)2.29颜色方案 (21)2.30回波颜色 (21)2.31菜单颜色 (21)2.32按键声音 (21)2.33系统日期时间设置 (21)2.34系统信息 (21)2.35恢复出厂设置 (21)2.36数据通讯 (22)3 探伤辅助功能应用 (23)3.1闸门报警的应用 (23)3.2闸门内展宽 (23)3.3波形冻结 (23)3.4曲面修正功能 (24)3.5 Ф值计算功能 (24)3.6 AWS D1.1焊缝评估 (25)3.7纵向裂纹高度测量 (26)3.8 探伤标准 (26)3.9 焊缝图示 (27)3.10 回波编码 (28)3.11回波包络 (29)3.12波峰记忆 (29)3.13 B扫描功能 (30)3.14存储功能 (30)4仪器调校及探伤举例 (33)4.1斜探头校准 (33)4.2 制作DAC曲线 (36)4.3斜探头焊缝探伤应用 (40)4.4直探头校准（单探头） (41)4.5直探头钢板探伤应用 (42)4.6直探头校准（双晶探头） (43)4.7直探头A VG曲线 (44)4.8 直探头锻件探伤应用 (46)5仪器的保养与维修 (47)5.1仪器的日常维护 (47)5.2仪器故障及处理方法 (47)附录 (48)附录1通用探伤报表 (49)附录2 常见问题解答 (50)附录3 超声波探伤仪计量检定说明 (51)附录4 菜单快速索引 (52)附录5 仪器操作流程图 (53)用户须知 (54)序言感谢您使用沧州欧谱检测仪器有限公司的超声波探伤仪产品，您能成为我们的用户，是我们莫大的荣幸。
探伤仪操作手册(OTD-2000)V1.00
OTD-2000 数字超声波探伤仪(使用说明书)北京欧亚图科技有限公司目录1探伤仪概述及技术指标..................................................................................................... 错误！未定义书签。
1.1探伤仪概述 ................................................................................................................ 错误！未定义书签。
1.2主要技术指标 ............................................................................................................ 错误！未定义书签。
1.3探伤仪的性能特点 .................................................................................................... 错误！未定义书签。
2了解键盘、菜单系统和显示............................................................................................. 错误！未定义书签。
2.1电池充电及电源适配器的使用................................................................................. 错误！未定义书签。
2.2探伤仪的电源开关 .................................................................................................... 错误！未定义书签。
UP3000系列数字式超声波检测系统
产品名称：UP3000系列数字式超声波检测系统产品详情：ULTRAPROBE® 3000: 如此先进而简单的数字式超声波检测系统ULTRAPROBE® 3000数字超声波检测系统, 它的通用性足以减少能源浪费和提高正常运行时间，同时节省了金钱，并改善环境！Ultraprobe®3000是集数字超声波检测，信息存储和检索的一体化探测系统，全部功能可以让你舒适地一手掌握在你的手里利用Ultraprobe®3000可经济便利地探测压缩空气和蒸汽的能量保持,以最大限度地体现成本效益。
利用Ultraprobe®3000可检验超声波在空中和结构的中传播. 这个数字检查系统足以被用于探测能源浪费和查找机械和电气问题, 它的多功能特性将帮助你在最有挑战性的环境中进行检测。
特性包括:宽范围的动态灵敏度“Spin and Click” 操作以定制你的检测模式, 储存和观察数据以及调整仪器设置带有校准分贝值的易读显示面板读出一个16段柱形图. 显示面板显现灵敏度等级，储存位数目，以及电池水平。
在一个新单元储存,重制和输入数据400 个记忆单元保存测试数据扫描和听诊器（接触）插入式模块在线更新系统软件无论在机械, 电气或流体系统中，Ultraprobe 3000都是你的节约能量的源泉从泄漏检测到蒸汽疏水阀检查, Ultraprobe 3000将使你对它的快速而精确的寻找和预防潜在问题的能力感到吃惊典型的Ultraprobe应用l 压缩空气泄漏检测l 蒸汽疏水阀检测l 阀门泄漏检测l 压力和真空泄漏检测l 热交换器, 锅炉, 冷凝器泄漏检测l 罐,管道,泄漏测试l 风噪声/水泄漏l 舱口泄漏完整性l 轴承测试。
YUT-2600数字超声波探伤仪使用说明书
YUT-2600数字超声波探伤仪使用说明书沈阳宇时先锋检测仪器有限公司前言数字超声波探伤仪YUT-2600产品介绍数字超声波探伤仪是我厂经数次研制开发、并通过电力、石油、铁路等部门的专门论证和评定后定型的新一代超声波探伤仪。
它采用脉冲反射式超声波探伤原理，由微电脑控制全部检测功能，交直流供电，体积小、重量轻，是一种理想的便携式超声波探伤仪。
目前，它已经在电力、石油、化工、机械、航天、航空、冶金、锅炉压力容器、钢结构和军工等各个工业领域的无损检测中获得了广泛的应用。
YUT-2600的诞生，代表了我公司开发、生产超声波系统产品达到一个新的里程碑。
质量第一、信誉第一、服务第一、创新第一是我公司的一贯宗旨。
YUT-2600型数字式超声波探伤仪是便携式、小型的无损检测设备，显示器采用TFT真彩显示屏带给你最佳的读测效果和视觉享受，强光下清晰显示，不再需要遮光罩附件配置。
轻触式键盘性能可靠、手感舒适，防水防油，键盘上操作键均为中文字符，屏幕显示为中、英两种语言，操作简单、方便实用。
本说明书旨在引导操作者逐步熟悉本机的性能、功能及使用方法。
为了快速掌握仪器的使用和功能并熟练运用其进行超声波探伤工作，请在使用前，详细阅读本说明书。
探伤任务千差万别，所遵循的标准、规程也各式各样，但只要能熟练、灵活应用本仪器，完成各类检测任务是不成问题的。
目录第1章YUT-2600仪器的简介 (1)1.1仪器主要部件名称 (1)1．2键盘 (1)1．3屏幕显示 (2)1.4仪器的基本操作 (2)1.4.1工作电源 (2)1.4.2连接探头 (3)1.4.3仪器启动与关机 (3)1.4.4回到仪器初始参数 (3)1.5仪器主菜单与功能键 (3)1.5.1主要操作菜单 (3)1.5.2功能键 (4)第2章仪器的功能、特点及参数 (4)2.1仪器基本功能 (4)2.2仪器的特点 (4)2.3技术参数 (5)第3章仪器详细操作 (6)3.1基本菜单 (6)3.1.1声程 (6)3.1.2声速 (6)3.1.3位移 (6)3.1.4增益 (7)3.1.5补偿 (7)3.1.6标度 (7)3.1.7抑制 (7)3.1.8波高读数 (8)3.2设置菜单 (8)3.2.1波形填充 (8)3.2.2色彩方案 (8)3.2.3语言 (8)3.2.4报警 (9)3.2.5自动波高 (9)3.2.6日期 (9)3.2.7时间 (9)3.2.8参数重置 (9)3.3闸门菜单 (10)3.3.1a闸门菜单 (10)3.3.1.1a闸门起位 (10)3.3.1.2a门宽度 (10)3.3.1.3a门高度 (10)3.3.1.4a闸门方式 (11)3.3.1.5显示选择 (11)3.3.2b闸门菜单 (11)3.3.2.1b闸门起位 (11)3.3.2.2b门宽度 (12)3.3.2.3b闸门高度 (12)3.3.2.4b闸门方式 (12)3.3.2.5测量点 (12)3.4探头菜单 (13)3.4.1双探头 (13)3.4.2探头零点 (13)3.4.3探头k值 (13)3.4.4前沿长度 (13)3.4.5工件厚度 (14)3.5曲线菜单 (14)3.5.1DAC回波 (14)3.5.2闸门a起位 (14)3.5.3判废线 (15)3.5.4定量线 (15)3.5.5评定线 (15)3.6存储菜单 (15)3.6.1存储号 (15)3.6.2调出 (16)3.6.3储存 (16)3.6.4删除 (16)3.6.5通讯 (16)3.7其它专用功能键的操作 (16)3.7.1自动增益 (16)3.7.2冻结 (17)3.7.3波峰记忆 (17)3.7.4全屏 (18)第4章检测应用 (18)4.1仪器的校准方法和步骤 (18)4.2直探头零点校准 (18)4.2.1校准过程 (18)4.2.2操作步骤 (19)4.2.3材料声速测量 (20)4.3斜探头校准 (20)4.3.1校准过程 (21)4.3.2操作步骤 (21)4.4DAC曲线制作 (23)第5章仪器的使用技巧 (24)5.1闸门的灵活运用 (24)5.2充分利用操作过程中屏幕提示信息 (24)5.3仪器状态和探伤参量的保存调用 (24)5.4使用电池工作，减少干扰 (25)5.5显示模式的切换 (25)5.6峰值记忆功能 (25)第6章探伤实例应用 (25)6.1钢板探伤应用 (26)6.1.1探测范围的调整 (26)6.1.2灵敏度的调整 (26)6.1.3缺陷的判别 (26)6.1.4缺陷的测定 (27)6.1.5缺陷定量 (27)6.1.6缺陷位置的测定 (27)6.2焊缝探伤应用 (28)6.2.1操作步骤 (28)6.2.2测量缺陷长度 (29)第7章仪器保养与维修 (29)7.1人员培训 (29)7.2仪器保养 (29)7.3环境要求 (29)7.4充电电池保养 (30)7.5更换电池 (30)7.6维修 (30)意外故障 (31)第8章仪器与计算机通讯 (31)8.1YUT-2600与计算机通讯及数据处理软件使用 (31)8.2主要功能 (32)附录一通用探伤报告 (33)附件二 (34)专业名词术语 (34)第1章YUT-2600仪器的简介1.1仪器主要部件名称本仪器主要部件名称如图1-1所示。
CTS-3000说明书
3.2.10.2 定量线………………………………………………………………………21
3.2.10.3 评定线………………………………………………………………………21
3.2.10.4 增益校正…………………………………………………………………22
3.2.11 存储 主菜单……………………………………………………………22
3.2.13 输出 主菜单………………………………………………………………23
3.2.13.1 亮度……………………………………………………………………23
3.2.13.2 报警器……………………………………………………………………23
3.2.13.3 打印机……………………………………………………………………23
3.3.4 屏幕打印/记录键 …………………………………………………………27
3.3.5 回波显示缩放键 ……………………………………………………………27
第4章 检测应用
4.1 仪器的校准方法和步骤……………………………………………………………28 4.1.1 探头参数设置……………………………………………………………………28 4.1.2 工件参数设置……………………………………………………………………29
3.3 其它专用功能键的操作……………………………………………………………26
3.3.1 增益量减少键 / 增益量增加键………………………………………………26
3.3.2 增益步进调节键
…………………………………………………………26
3.3.3 显示冻结键 ＊…………………………………………………………………27
3.2.11.1 存储号……………………………………………………………………22
ESD3000 - 模块化手持检测器 电静电ichtet 测试说明书
Accredited CalibrationQuality at EMC PARTNER is based on an ISO 9001 manage-ment system. This is the foundation for an ISO 17025 accredi-tation verified by the Swiss Calibration Service (SCS). SCS No. 146 is the accreditation number of EMC PARTNER AG. Locally accredited but recognized worldwide through affiliation with the ILAC organisationTHE ESD TESTING SOLUTIONPOWER AT YOUR FINGER TIPSElectrostatic Discharge (ESD) is the most common test procedure applied toany electronic or electrical equipment. Used extensively to test:›Commercial products›Industrial systems›Military electronics›Automotive electronics›Fuses and detonators›Railway electronics›Avionic equipment qualification›Telecom equipment›Electronic componentsThe easily changeable and fully calibrated discharge networks, quickly adaptESD3000 to the requirements of any new application.Light and easy to use.3EASIL Y EXPANDABLEESD3000 is designed with the user in mind. The modular design allows configuration ac -cording to customer wishes, addition of more networks when adding applications and easy extension from 16kV to 30kV using the same generator. Automatic network recognition means ESD3000 is always ready.ESD3000 + DMx ESD3000 + RM32 + DNxIncludedRechargable Long-life battteriesUp to 3 test tips (Sharp, Round, Corona)Charger & Firmware update cableHandy, robust carrying case4Discharge Modules (DMx)up to 16kV Air / 10kV Contact Discharges ESD3000 required Discharge Networks (DNx)up to 30kV Air- and Contact Discharges DM1 (150pF, 330 Ohm)DM2 (330pF / 2000 Ohm)DM4 (100pF / 1500 Ohm)DM6 (100pF / 1500 Ohm)DM7 (200pF / 0 Ohm)ESD3000 & RM32 required DN1 (150pF / 330 Ohm)DN2 (330 pF, 2000 Ohm)DN3 (150 pF, 2000 Ohm)DN4 (500 pF, 5000 Ohm)DN5 (500 pF, 500 Ohm)DN6 (330 pF, 330 Ohm)Available Extensions Available ExtensionsAVAILABLE MODULESCommercial & IndustrialIEC 61000-4-2 / ITU-T K.44ESD3000DM1 (150pF, 330 Ohm)ANSI / IEEE C63.16ESD3000 DM16A-C63H (150pF / 330 Ohm)ESD3000 DM16C-C63H (150pF / 330 Ohm)UL 991ESD3000DM32A-UL991 (100pF / 1000 Ohm)Component TestIEC 61340-3-1 / JEDEC 22-A114 / MIL-STD-750DESD3000DM6 (100pF / 1000 Ohm)IEC 61340-3-2 / JEDEC 22-A115ESD3000DM7 (200pF / 0 Ohm)AutomotivePSA B21 7110ESD3000DM2 (330pF / 2000 Ohm)ISO 10605 / SAEJSSI-IS/FORD AB/AC /GMW 3097ESD3000DN1(150pF / 330 Ohm)ESD3000DN2 (330pF / 2000 Ohm)ESD3000DN3 (150pF / 2000 Ohm)ISO 10605ESD3000DN6 (330pF / 330 Ohm)JASO D 001-94ESD3000DN32-CAR1 (150pF / 500 Ohm)Renault 32-10-001/D and 32-10-035/AESD3000DN32-CAR5 (330pF / 0 Ohm)MilitaryMIL-STD-883 / GR78-COREESD3000DM4 (100pF / 1500 Ohm)STANAG 4239 / ISO 14304 / MIL-STD-1512ESD3000DN4 (500pF / 5000 Ohm)MIL-STD-331C / MIL-DTL-23659D / STANAG 4239ESD3000DN5 (500pF / 500 Ohm)MIL-STD-1576ESD3000DN32-MIL2 (400pF / 150 Ohm)ESD3000DN32-MIL3 (500pF / 0 Ohm)5The original 30kV battery powered generator with a unique system of changeable modules. Flexibility and power combined.UNIQUE FEATURES Long life standard battery. Up to 8 hours on full battery charge. Readily available in any store.AA battery powered Add calibrated modules to maintain the system value. Unique modules and accessories for special applications. Extend testing capability Single key press switches polarity before and during the test.Electronic polarity changeErgonomic hand held tester without additional base unit. Program directly on generator.Compact solution6Technical Specifications7ESD3000 MODULES ESD3000M a i n f r a m e D M 1D M 2D M 4D M 6D M 7R M 32D N 1D N 2D N 3D N 4D N 5D N 6C A R 1C A R 5I N D 1M I L 2M I L 3A -C 63HC -63H U L 991IEC 61000-4-2✓✓✓ITU-T K20✓✓PSA B32 7110✓✓MIL-STD-883✓✓GR78-CORE ✓✓IEC 61340-3-1✓✓JEDEC 22-A114✓✓MIL-STD-750D ✓✓IEC 61340-3-2✓✓JEDEC22-A115✓✓✓ISO 10605✓✓✓✓✓✓DO-160 S25✓✓✓✓MIL-STD-461G CS118✓✓✓✓ GMW3100✓✓✓✓✓✓GMW3097✓✓✓✓STANAG4239✓✓✓✓ISO14304✓✓✓MIL-STD-1512✓✓✓✓MIL-STD-330C ✓✓✓✓JASO D 001-94✓✓✓Renault 32-10-001/D ✓✓ABD0100.1.2✓✓✓Special MIL ✓✓✓MIL-STD-1576✓✓✓ANSI C63.16✓✓✓UL991✓8ACCESSORIES FOR DIFFERENT MODULES ESD3000M a i n f r a me D M 1D M 2D M 4D M 6D M 7R M 32D N 1D N 2D N 3D N 4D N 5D N 6C A R 1C A R 5I ND 1M IL 2M IL3A -C 63HC -63HEARTH CABLE ✓IEC IECESD-VCP50✓IEC IECESD-TARGET2✓IECESD-TARGET2 DN ✓ISO ISO ISO ISOESD-VERI-V ✓✓O O O ✓O O ✓✓O O O ✓✓✓✓ESD-STAND ED2✓O O O O O O O O O O O O O O O O O O O ESD-HCP-AUTO ✓ISO ISODM-EXT ✓MIL MILSAFETY-S ✓MIL MILTC-MIG24 ED ✓MIL MILESD3000 CNH12✓O O O O O OOPTOLINK ✓O O O O O O O O O O O O O O O O O O O TEMA ✓O O O O O O O O O O O O O O O O O O O Overview ESD3000 | Modules | Accessories 91. ESD3000 MAINFRAME AND MODULES1.1. TECHNICAL SPECIFICATIONS ESD3000 MainframeTo be used with modules all modules from this document are compatible Construction fully portable, no additional basic unitControl LCD and 6 menu buttons, 1 trigger button Maximum voltage 16 kV or 30 kV, depending on modules chosen Voltage steps 100 V - testDischarge polarity positive, negative, alternatingDischarge modes contact discharge (CD) and air discharge (AD)Discharge frequency CD max. 20 Hz, (pulse every 0.05, 0.1, 0.2 … 99 s)Discharge frequency AD ≥ 30 Hz or more, for ex. with DM1, DN1, other Counter pre-selectable, 1 to 29999Discharge detection selectable, count pulses or count discharges Holding time ≥ 5 sTrigger manual, automatic, remote Ramps voltage, polarityReporting with TEMA automatic report sequence, amplitude,polarity Dimensions for ex. withDM1 and tip 340 x 130 x 70 mm Weight mainframe 730 g, w/o battery pack and module Weight equipped 1050 g, with battery pack, DM1 and AD tip Power supply 10 x AA rechargeable batteries or mainsIncluded 10 batteries, mains adapter, ground cable 2 m, 3 test tips (AD, AD2, CD), carrying case, RS232 cable, E3Loader for remote control Requires at least a DM module, or a DN module + RM32ESD3000DM1Standards IEC 61000-4-2 (latest), ITU-T K.20,Other standards MIL-STD-461G CS118, DO-160 Section 25Storage capacitor 150 pF ± 10 %Discharge resistor 330 Ω ± 10 %Voltage range AD 0.2 – 16 kV ± 5 %Voltage range CD 0.2 – 10 kV ± 5 %Current rise time into 2 Ω0.8 ± 25 %First I peak into 2 Ω CD 7.5 A @ 2 kV – 37.5 A @ 10 kV (± 15 %)Current at 30 ns 4 A @ 2 kV – 20 A @ 10 kV (± 30 %)Current at 60 ns 2 A @ 2 kV – 10 A @ 10 kV (± 30 %)Optional ESD-TARGET2Overview ESD3000 | Modules | Accessories10ESD3000DM2Standards PSA B32 7110 up to 16 kV / 10 kVStorage capacitor330 pF ± 10 %Discharge resistor2000 Ω ± 10 %Voltage range AD0.2 – 16 kV ± 5 %Voltage range CD0.2 – 10 kV ± 5 %Current rise time into 2 Ω0.7 – 1 nsFirst I peak into 2 Ω CD7.5 – 30 A ± 10 %RC time constant600 ± 130 nsESD3000DM4Standards MIL-STD-883, GR78-COREStorage capacitor100 pF ± 10 %Discharge resistor1500 Ω ± 10 %Voltage range AD0.2 – 16 kV ± 5 %Voltage range CD0.2 – 10 kV ± 5 %Current rise time into 2 Ω<********–8kVI peak into 2 Ω (CD) 2.66 A @ 4 kV, 3.33 A @ 5 kVESD3000DM6Standards IEC 61340-3-1, JEDEC 22-A114,MIL-STD-750DStorage capacitor100 pF ± 10 %Discharge resistor1500 Ω ± 10 %Voltage range CD0.25 – 8 kV ± 10 %Current rise time into 2 Ω2–*********–8kVRC time constant150 ± 20 nsESD3000DM7Standards IEC 61340-3-2, JEDEC 22-A115Storage capacitor200 pF ± 10 %Discharge resistor0 Ω ± 10 %Voltage range CD0.1 – 2 kV ± 5 %Current into short circuit 1. 7 A – 35 A ± 15 % into short circuit (< 1 Ω)Current waveform as per IEC 61340-3-2 into SC (< 1 Ω)Current ringing frequency11 – 16 MHz @ 0.1 – 2 kV into SC (< 1 Ω)ESD3000DM32A-UL991Standard UL991, paragraph 15.2.2Storage capacitor100 pF ± 10 %Discharge resistor1500 Ω ± 5 %Discharge mode AD only, consists of DM+ and DM- modulesVoltage range AD 4 – 30 kV ± 5 %Rise time at 4 kV, 20 kV< 5 nsRC const. at 4 kV, 20 kV150 ns ± 20 %Overview ESD3000 | Modules|Accessories1130 KVThese Extensions need the Module ESD3000RM32ESD3000DN1Standards IEC 61000-4-2,ISO 10605Other standards MIL-STD-461G CS118, DO-160 Section 25Storage capacitor150 pF ± 10 %Discharge resistor330 Ω ± 10 %Voltage range AD 1 – 32 kV ± 5 %Voltage range CD 1 – 30 kV ± 5 %Current rise time into 2 Ω0.8 ± 25 %First I peak into 2 Ω CD7.5 A @ 2 kV – 112.5 A @ 30 kV (± 15 %)Current at 30 ns 4 A @ 2 kV – 60 A @ 30 kV (± 30 %)Current at 60 ns 2 A @ 2 kV – 30 A @ 30 kV (± 30 %)Requires ESD3000RM32Included in ESD3000RM32Detachable module for faster tr (<700ps)Optional ESD-TARGET2 DN, ESD-HCP-AUTOESD3000DN2Standards ISO 10605, GMW3100, GMW3097Storage capacitor330 pF ± 10 %Discharge resistor2000 Ω ± 10 %Voltage range AD 2 – 30 kV ± 5 %Voltage range CD 2 – 30 kV ± 5 %Current rise time into 2 Ω0.7 – 1 nsFirst I peak into 2 Ω CD7.5 A @ 2 kV – 112.5 A @ 30 kV (- 0 / + 30 %) RC time constant600 ± 130 nsRequires ESD3000RM32Optional ESD-TARGET2 DNESD3000DN3Standards ISO 10605, GMW3100, GMW3097Storage capacitor150 pF ± 10 %Discharge resistor2000 Ω ± 10 %Voltage range AD 2 – 30 kV ± 5 %Voltage range CD 2 – 30 kV ± 5 %Current rise time into 2 Ω0.7 – 1 nsFirst I peak into 2 Ω CD7.5 A @ 2 kV – 112.5 A @ 30 kV (- 0 / + 30 %) RC time constant300 ± 60 nsRequires ESD3000RM32Optional ESD-TARGET2 DNOverview ESD3000 | Modules|Accessories12ESD3000DN4Standards STANAG4239, ISO14304MIL-STD-1512, MIL-STD-330Storage capacitor500 pF ± 10 %Discharge resistor5000 Ω ± 10 %Voltage range CD 2 – 30 kV ± 5 %I rise time into 2 Ω CD0.7 – 1 nsRequires ESD3000RM32Optional ESD3000 SAFETY-S, DM-EXT,TC-MIG24EDESD3000DN5Standards STANAG4239, MIL-STD-1512, MIL-STD-330Storage capacitor500 pF ± 10 %Discharge resistor500 Ω ± 10 %Voltage range CD 2 – 30 kV ± 5 %I rise time into 2 Ω CD0.7 – 1 nsRequires ESD3000RM32Optional ESD3000 SAFETY-S, DM-EXT,TC-MIG24EDESD3000DN6Standards ISO 10605, GMW3100Storage capacitor330 pF ± 10 %Discharge resistor330 Ω ± 10 %Voltage range AD 2 – 30 kV ± 5 %Voltage range CD 2 – 30 kV ± 5 %Current rise time into 2 Ω0.7 – 1 nsRC time constant300 ± 130Requires ESD3000RM32Optional ESD-TARGET2 DN, ESD-HCP-AUTOSPECIALESD3000DN32-CAR1Standard JASO D 001-94Storage capacitor150 pF ± 10 %Discharge resistor500 Ω ± 10 %Voltage range AD 2 – 30 kV ± 10 %Voltage range CD 2 – 30 kV ± 10 %I rise time into 2 Ω CD0.8 ± 25 %First I peak into 2 Ω AD< 5 nsRC time constant300 ± 60 nsRequires ESD3000RM32Optional ESD-TARGET2 DNOverview ESD3000 | Modules|Accessories13ESD3000DN32-CAR5Standard Renault 32-10-001/DApplication testing airbag initiatorsStorage capacitor330 pF ± 10 %Discharge resistor0 Ω ± 10 %Source impedance Rt< 30 ΩVoltage range AD 2 – 16 kV ± 5 %Voltage range CD 2 – 16 kV ± 5 %Requires the module is already integrated in RM32 ESD3000DN32-IND1Standard ABD0100.1.2, IEC801-2Storage capacitor150 pF ± 10 %Discharge resistor150 Ω ± 10 %Voltage range AD 2 – 30 kV ± 5 %Voltage range CD 2 – 30 kV ± 5 %I rise time into 2 Ω CD0.7 – 1 nsRC time constant30 ns ± 30 %Requires ESD3000RM32ESD3000DN32-MIL2Standards special military requirementStorage capacitor400 pF ± 10 %Discharge resistor150 Ω ± 10 %Voltage range AD 2 – 30 kV ± 5 %Voltage range CD 2 – 30 kV ± 5 %I rise time into 2 Ω CD0.8 ± 25 %Requires ESD3000RM32ESD3000DN32-MIL3Standard MIL-STD-1576Storage capacitor500 pF ± 10 %Discharge resistor0 Ω ± 10 %Voltage range CD 2 – 30 kV ± 5 %Requires ESD3000RM32ESD3000DM16A-C63HStandard ANSI C63.16 (AD requirement)Storage capacitor150 pF ± 10 %Discharge resistor330 Ω ± 10 %Voltage range AD 2 – 16 kV ± 5 %Requires-Overview ESD3000 | Modules|Accessories14ESD3000DM16C-C63HStandard ANSI C63.16 (CD requirement)Storage capacitor150 pF ± 10 %Discharge resistor330 Ω ± 10 %Voltage range CD 2 – 16 kV ± 5 %Requires-1.2. POWER, CLIMATIC CONDITIONS, SHIPPING WEIGHT, DIMENSIONSESD3000 mainframeMains adapter95 – 250 V (50/60 Hz)Power consumption ON < 20 VA, standby < 5 VATemperature range15 – 35 °CHumidity30 – 60 % non-condensingAir pressure86 – 106 kPaShipping weight 2.4 kg plus selected modulesCarrying case dimensions46 x 41 x 17 cmIncluded in deliveryUser manual with conformity declarationCalibration certificate factory calibration for selected modules2. ACCESSORIES FOR ESD30002.1. TECHNICAL SPECIFICATIONSEARTH CABLEApplication connection of HCP or VCP to ground planeImpedance 2 x 470 kΩLength 2 mConnectors 2 x banana plugsOverview ESD3000 | Modules|Accessories15ESD-VCP50Application indirect ESD application as per standardSpacer in between10 cm wooden spacerCoupling plane50 x 50 cmApplication points one on each sideDimensions50 x 50 x 10 cmWeight8 kgIncluded 2 m earth cable (with 2 x 470 kΩ)ESD-TARGET2Standard IEC 61000-4-2 latestApplication current target for calibration of ESD generator Input impedance 2 ΩInput voltage max. 10 kV CDFrequency range± 0.5 dB up to 1 GHz, ± 1.2 dB up to 4 GHzCurrent range0 – 50 A standard, could be extendedTransfer function0.2 V / 1 A with 20 dBDiameter70 mmThickness40 mmWeight398 g including attenuatorFixing8 x M3 screws, included in deliveryIncluded20 dB att., 50 Ω coax. cable (1 m) with BNC out ESD-TARGET2 DNStandard IEC 61000-4-2 latestApplication current target for calibration of ESD generator Input impedance 2 ΩInput voltage max. 30 kV CDFrequency range± 0.5 dB up to 1 GHz, ± 1.2 dB up to 4 GHzCurrent range0 – 120 A standard, could be extendedTransfer function0.2 V / 1 A with 20 dB, 0.02 V / 1 A with 40 dB Diameter70 mmThickness40 mmWeight398 g including attenuatorFixing8 x M3 screws, included in deliveryIncluded40 dB att., 50 Ω coax. cable (1 m) with BNC out ESD-VERI-VApplication target for ESD DC voltage measurementInput impedance20 GΩ || 3 pFInput voltage range0 – 32 kVOutput voltage range0 – 1.6 VOutput connector BNCDimensions17 cm height, 5.5 cm diameterWeight433 gIncluded earth conductorOverview ESD3000 | Modules|Accessories16ESD-STAND Ed2Application stand for supporting ESD gun, fixed point testHeight50 – 180 cm, adjustablePosition360˚ adjustableDimensions64 x 17 x 12 cm (packed)Weight 4 kgIncluded cable holder for calibrationESD-HCP-AUTOApplication coupling plane as per ISO 10605 annex FLength1500 mmInsulation distance50 mmTest level8 – 20 kV, as per standardDimensions180 x 120 x 5 cmWeight 2.2 kgIncluded EARTH CABLEESD3000DM-EXTApplication 1 m extension cable for ESD3000 modulesCompatibility DM and DN modulesCable length 1 ± 0.05 mWeight0.5 kg including accessoriesCan be used with DN modulesESD3000 SAFETY-SStandard MIL-STD-1512Application safety switch for testing explosive devicesVoltage max. 30 kV CDDimensions20 x 16 x 12 cmWeight 2 kg including accessoriesIncluded mains adapterTo be used with ESD3000DM-EXT, TC-MIG24 EDTC-MIG24 ED for testing explosive devicesApplication test cabinetVoltage insulation max. 36 kVEUT dimensions max. 30 x 30 x 20 cmEUT weight max. 5 kgSafety circuit door interlockSignal lamps red and green lamps built-inControl of signal lamps for example with ESD3000 SAFETY-SDimensions47 x 43.5 x 25.4 cmWeight8 kgIncluded connection cable 25pol/ESD3000 SAFETY-SOverview ESD3000 | Modules|Accessories17ESD3000 CNH12Application Magnetic field loop for ESD3000 test system Loop diameter12 cmLoop current allowed> 100 ADischarge mode selection contact discharge (CD)Current at 15 kV setting50 A, with RM32 and DN1Current at 30 kV setting108 A, with RM32 and DN1Dimensions33 x 13 x 1 cmWeight0.2 kg including accessoriesRequires ESD3000RM32, ESD3000DN1or other DNESD3000-OPTOLINKApplication(insulating) optical cable ESD3000 - computer Length10 mInterface RS232, requires USB adapterBaud rate9600 bpsWeight0.2 kgIncluded tranceiver with mains adapterRequires USB-RS 232 ADAPTERUSB-RS232 ADAPTERApplication adapter between RS232 and USB interfac-esAdapter type Passive, no power supplyInput RS232 maleOutput USBCable length0.35 mWeight0.2 kgTEMAApplication control software for ESD3000 systemLicense 1 license for 1 generatorCapabilities with ESD3000Sequences, reporting, remote controlCompatibility Windows XP, 7, 8, 10Requires ESD3000-OPTOLINK, USB-RS 232 ADAPTEROverview ESD3000 | Modules|Accessories18THE EMC PARTNER PRODUCT RANGE Find further brochures on our website /brochures or contact your local representative for a hardcopy.LIGHTNING TESTSImpulse test equipment and accessories for aircraft, military and tel -ecom applications. Complete solutions for RTCA / DO-160 and EURO -CAE / ED-14 for indirect lighting on aircraft systems, MIL-STD-461 tests CS106, CS115, CS116, CS117, CS118 and Telecom, ITU-T .K44 basic and enhanced tests for impulse, power contact and power induction.COMPONENT TESTSImpulse generators for testing; varistors, gas discharge tubes (GDT),surge protective devices (SPDs), X / Y capacitors, circuit breakers,electricity meters, protection relays, insulation material, suppressor diodes, connectors, chokes, fuses, resistors, emc-gaskets, cables, etc. EMISSION MEASUREMENTSMeasurement of Harmonics and Flicker in 1-phase and 3-phaseelectrical and electronic products according to IEC /EN 61000-3-2 and 61000-3-3 . HARCS Immunity software adds interharmonic tests, voltage variation according to IEC/EN 61000-4-13, -4-14.IMMUNITY TESTSTransient Test Systems for all EMC tests on electronic equipment. ESD, EFT, surge, AC dips, AC magnetic field, surge magnetic field, commonmode, damped oscillatory and DC dips. According to IEC and EN 61000-4-2, -4, -5, -8, -9, -10, -11, -12, -13, -14, -16, -18, -19, -29.SYSTEM AUTOMATIONA full range of accessories enhance the test systems. Test cabinets, test pistols, adapters and remote control software, simplify interfacing with the EUT. Programmable PSU, EMC hardened for frequencies from 16.7Hz to 400Hz. PS3-SOFT-EXT complies with IEC / EN 61000-4-14 and -4-28.SERVICEOur committment starts with a quality management system backing up our ISO 17025 accreditation. With the SCS number 146, EMC PARTNERprovide accredited calibration and repairs. Our customer support teamare at your service!。
EDR-3000系列产品说明书
Eaton Corporation
f/w 3.11
4/14/2010
Category
Modbus TCP Register
30018 30019 30020 30023 30024 30025
30026
30027 30029 30030 30031 30032 30033 30034 30035 30036 30037 30038
1
51P1 Signal: Trip Command
1
51P2 Signal: active
1
51P2 Signal: Trip Command
blocked
1
51P2 Signal: External Blocking of
the Trip Command
1
51P2 Signal: Pickup IA
UINT16 no-units
UINT16 UINT16 UINT16 UINT16 UINT16 UINT16 UINT16 UINT16 UINT16 UINT16 UINT16
no-units no-units no-units no-units no-units no-units no-units no-units no-units no-units no-units
30010
30011
30012
30013 30014
30015
30016
30017
Vendor Name
32
Model Name
32
Display Name
32
Device Type
32
Device ID
32
Serial Number