车载电话安装使用说明
MD780(G)数字车载终端使用说明书
4mmx16mm 9
自攻螺钉
3 安装支架
10 电话式听筒固定座
4.8mmx20mm 4
自攻螺钉
11 GPS天线
无键盘手持麦克风/
电源线
5
12
带键盘手持麦克风
（带保险丝）
4mmx16mm 6
自攻螺钉
13 射频天线
7 手持麦克风固定座 / /
5. 将手持麦克风或电话式听筒插头上的三角标识朝上 对准航空头接口插入，顺时针旋转航空头方向键使 其固定。
漫游状态 已开启漫游检测 已开启扰频或加密功能 已开启空口加密功能 扫描状态
扫描停留于非优先信道 扫描停留于优先信道1 扫描停留于优先信道2 已开启非专用控制信道功能
图标
产品状态
已开启声控功能
已开启监听功能
已开启扬声器 已开启静音功能 已开启音质音量优化器 已开启同频中转功能
短数据图标
图标
产品状态
接收到短消息，或者有未读短消息
该符号表示硬件界面控件名称，例如：按 【】
【PTT】键。
该符号用于对多级菜单进行逐级指引，例 > 如：选择“文件”菜单下的“新建”，表示
为：“文件 > 新建”。
包装清单
包装盒内含有以下物品。如有任何物品丢失或损坏， 请与您所购产品的经销商联系。
常规机型/集群机型
物品
数量
物品
数量
车载终端
1 固定旋钮
2
l 带 键 盘 手 持 麦 克 风： 【 TK 】 键、 【 P1】 键 和 【P2】键。
l 带键盘电话式听筒：可编程按键与车载终端的可编 程按键相同。
安装产品
注意事项
安装车载终端之前，请务必仔细阅读以下注意事项：
SureCall Fusion2Go Max 车载电话信号增强器用户手册说明书
User Manual 06.18.2019Thank you for purchasing SureCall’s Fusion2Go Max cell phone signal booster kit. Fusion2Go Max provides enhanced voice, text and 4G data signal for any vehicle.If you have any questions during setup, please reach out to our US-based experienced support technicians:• Call: 1-888-365-6283• Email:********************Table of ContentsHow It Works (3)Package Contents (4)Step 1: Attach Outside Antenna to the Vehicle’s Roof (4)Step 2. Install the Inside Patch Antenna (5)Step 3. Place Booster and Connect Cables (6)Step 4. Connect Power (7)LED Indicators (8)Troubleshooting (8)Specifications (9)Antenna Kitting Information (11)Consumer Guidelines (12)Three-Year Product Warranty (13)2|1-888-365-6283|********************|1-888-365-6283|********************3How It WorksThe SureCall Fusion2Go Max is a high-quality bidirectional booster that enhances cellular signals for vehicles.The Fusion2Go Max works with two antennas:• An inside antenna that communicates with your cell phone. •An outside antenna that communicates with the cell tower.Signals sent from a cell tower are received by the outside antenna, amplified by the booster and then sent to your cell phone via the inside antenna. When your phone transmits, the sig-nal is sent to the inside antenna, and then sent to the cell tower via the outside antenna.Power AdapterBoosterPatch Antenna|1-888-365-6283|********************4SureCall offers many accessories to customize your signal booster kit to your specific needs. To learn more about these accessories or to replace damaged or missing items contact your reseller.For exchanges or returns, your reseller may request original packaging and basic product information. Turn over the signal booster and record the model and serial number for easy reference:Serial #: __________________________________________________________________________Purchase Date: ____________________________________________________________________Your Fusion2Go Max signal booster package includes the following items:1. One outside magnetic mount antenna2. One SureCall Fusion2Go Max signal booster3. O ne inside patch antenna4.DC power adapter3. 12V DC PowerAdapter1. Outside Magnetic-Mount Antenna with Optional Adhesive Mount2. S ignal Booster3. M ulti-DeviceInside PatchAntenna6|1-888-365-6283|********************|1-888-365-6283|********************7Connect the power cord connector to the signal booster and insert the other end into your cigarette lighter adapter 1. The Power LED illuminates to show that the signal booster is ready for use. The Alert LEDs flash 5 times to show the frequency band is operational. Place a call in a location you have previously experienced poor signal and confirm that your phone is receiving a boosted signal.Note: When your car is off, turn the power switch to OFF to keep the booster from continuingto draw power from your vehicle.[1] WARNING: T he booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage powersupply. This can damage the booster and/or cause personal injury.|1-888-365-6283|********************8* WARNING:T he booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the booster and/or cause personal injury.LED IndicatorsPlace a call in a location you have previously experienced poor signal and confirm that your phone is receiving a boosted signal. Normal operation is indicated by Green LEDs (both flashing and solid). In the event Red LEDs appear, antenna adjustments may be needed.Color Condition IndicationGreen Solid Indicates normal operation.Green Flashing Normal operation. Indicates that Automatic Gain Control (AGC) is self-adjusting due to over-signal or antenna proximity. RedFlashingIndicates issues caused by overpowering or oscillation.Adjustment of your outside antenna placement is likely needed. Verify that it has sufficient separation from the inside antenna, as well as, any potentially interfering objects or antennasNote that the booster case may become warm during operation. This is normal.TroubleshootingProblemResolutionSignal booster has no power1. Verify that Power LED on the signal booster is ON.2. Verify that power source is operational and fuse is intact.3. Try connecting power supply to an alternate power source.4.If power remains OFF, contact tech support at:»************************************After completinginstallation, signal has not ImprovedVerify that all cab le connections are tightly fitted to the booster.Try further separating the antennas.Note: Bars are not always a reliable measure of signal. The best way to confirm signal coverage is the ability to place and hold a call.Outside antenna magnet doesn’t workFor non-magnetic vehicle surfaces, use the optional adhesive tape included in the packaging.SpecificationsNote: The term “IC” before the radio certification number only signifies that Industry Canada technicalspecifications were met.|1-888-365-6283|********************910presented on the above table are at 1 dB below the Transmit off RF input level.Warning: U nauthorized antennas, cables, and/or coupling devices are prohibited by FCC new rules. Changes or modifications not expressly approved by SureCall could void the user’s authority to operate theequipment.FCC 27.50(d)(4) Statement: Fixed, mobile and portable (hand-held) stations operating in the 1720-1755 MHz band are limited 1 Watt EIRP. Fixed sta t ions operating in this band are limited to a maximum antenna height of 10 meters above ground. Mobile and portable stations operating in this band must employ a means for limiting power to the minimum necessary for successful communications.When used with any mobile device utilizing the 1710-1755 MHz band, the FCC limits booster equipment placement to a maximum of 10 meters above ground level. Installation of this equipment which does not comply with federal requirements may subject the owner to FCC enforcement action15.105 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:* Reorient or relocate the receiving antenna* Increase the separation between the equipment and receiver.* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected* Consult the dealer or an experienced radio/TV technician for help.15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.|1-888-365-6283|********************As above, lower gain antenna can also be used.*Please note: Fusion2Go Max is designed to operate as a complete kit with the exterior magnetic antenna and interior amplifier connected via the provided cable. Each of these components is necessary for proper operation and because ofthis no other type of exterior antenna can be used with the Fusion2Go Max amplifier.|1-888-365-6283|********************11Consumer GuidelinesThis is a CONSUMER deviceBEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.In Canada, BEFORE USE you must meet all requirements set out in ISED CPC-2-1-05 1You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from (i.e. MUST NOT be installed within 20 cm of) any person.You MUST cease operation of this device immediately if requested by the FCC (or ISED in Canada) or a licensed wireless service provider. WARNING: E911 location information may not be provided or may be inaccurate for calls served by using this device.Ce produit est un appareil de CONSOMMATIONAVANT DE L’UTILISER, vous DEVEZ ENREGISTRER CE DISPOSITIF auprès de votre fournisseur de services cellulaires et obtenir son consentement. La plupart des fournisseurs de services cellulaires autorisent l’utilisation d’amplificateurs de signal. Il se peut que certains fournisseurs n’autorisent pas l’utilisation de ce dispositif sur leur réseau. Si vous n’êtes pas sûr, contactez-le.Au Canada, AVANT DE L’UTILISER vous devez répondre à toutes les exigences ISED CPC-2-1-05 2Vous DEVEZ utiliser ce dispositif avec les antennes et les câbles autorisés, tel que le spécifie le fabricant. Les antennes DOIVENT être installées à au moins 20 cm (8 po) (NE DOIVENT PAS être installées à moins de 20 cm) de toute personne avoisinante.Vous DEVEZ arrêter cet appareil immédiatement à la demande de la FCC (ISED au Canada) ou de tout fournisseur de services cellulaires autorisé. AVERTISSEMENT: Il se peut que les informations relatives à la localisation E911 ne soient pas disponibles ou soient inexactes pour les appels qui utilisent cet appareil.Register your cellular booster with your wireless carrier at the following urls:Verizon: /wcms/consumer/register-signal-booster.htmlAT&T: https:////T-Mobile: https:///docs/DOC-9827Sprint: https:///legal/fcc_boosters.htmlU.S. Cellular: /uscellular/support/fcc-booster-registration.jspThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.I mportant: The antenna must be located at least 8 inches from all persons. The FCC requires to never use the cell phone in the cradle next to your ear.CAN ICES-3 (B)/NMB-3(B) (Canada) :This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operationThe Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device.Cet appareillage numérique de la classe B répond a toutes les exigencies de l’interférence canadienne causant des réglements d’équipement. L’opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l’interférence nocive, et (2) ce dispositif doit accepter n’importe quelle intérference reçue, y compris l’intérference qui peut causer l’opération peu désirée.La puissance de sortie nominale indiquée par le fabricant pour cet appareil concerne son fonctionnement avec porteuse unique. Pour des appareils avec porteuses multiples, on doit réduire la valeur nominale de 3,5 dB, surtout si le signal de sortie est retransmis et qu’il peut causer du brouillage aux utilisateurs de bandes adjacentes. Une telle réduction doit porter sur la puissance d’entrée ou sur le gain, et ne doit pas se faire au moyen d’un atténuateur raccordé à la sortie du dispositif.1 F or details on the requirements specified in ISED CPC-2-1-05, visit: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html2 P our plus de détails sur les exigences ISED CPC-2-1-05, reportez-vous au site: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html|1-888-365-6283|********************12Three-Year Product WarrantyRegister at /activateSureCall warrants its products for three years from the date of purchase against defects in workmanship and/or materials. Specifications are subject to change. The three-year warranty only applies to products meeting the latest FCC Certification Guidelines stated on 2/20/2013 and going into effect April 30, 2014. A two-year warranty applies to any products manufactured before May 1, 2014.Products returned by customers must be in their original, un-modified condition, shipped in the original or protective packaging with proof-of-purchase documentation enclosed, and a Return Merchandise Authorization (RMA) number printed clearly on the outside of the shipping container. Buyers may obtain an RMA number for warranty returns by calling the SureCall Return Department toll-free at 1-888-365-6283. Any returns received by SureCall without an RMA number clearly printed on the outside of the shipping container will be returned to sender. In order to receive full credit for signal boosters, all accessories originally included in the signal booster box must be returned with the signal booster. (The Buyer does not need to include accessories sold in addition to the signal booster, such as antennas or cables.)This warranty does not apply to any product determined by SureCall to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages the product’s physical or electronic properties.SureCall warrants to the Buyer that each of its products, when shipped, will be free from defects in material and workmanship, and will perform in full accordance with applicable specifications. The limit of liability under this warranty is, at SureCall’s option, to repair or replace any product or part thereof which was purchased up to THREE YEARS after May 1, 2014 or TWO YEARS for products purchased before May 1, 2014, as determined by examination by SureCall, prove defective in material and/or workmanship. Warranty returns must first be authorized in writing by SureCall. Disassembly of any SureCall product by anyone other than an authorized representative of SureCall voids this warranty in its entirety. SureCall reserves the right to make changes in any of its products without incurring any obligation to make the same changes on previously delivered products.As a condition to the warranties provided for herein, the Buyer will prepay the shipping charges for all products returned to SureCall for repair, and SureCall will pay the return shipping with the exception of products returned from outside the United States, in which case the Buyer will pay the shipping charges.The Buyer will pay the cost of inspecting and testing any goods returned under the warranty or otherwise, which are found to meet the applicable specifications or which are not defective or not covered by this warranty.Products sold by SureCall shall not be considered defective or non-conforming to the Buyer’s order if they satisfactorily fulfill the performance requirements that were published in the product specification literature, or in accordance with samples provided by SureCall. This warranty shall not apply to any products or parts thereof which have been subject to accident, negligence, alteration, abuse, or misuse. SureCall makes no warranty whatsoever in respect to accessories or parts not supplied by it.Limitations of Warranty, Damages and Liability:EXCEPT AS EXPRESSLY SET FORTH HEREIN, THERE ARE NO WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHER WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS, WHETHER EXPRESSED OR IMPLIED, IN LAW OR IN FACT, ORAL OR IN WRITING.SURECALL AGGREGATE LIABILITY IN DAMAGES OR OTHERWISE SHALL NOT EXCEED THE PAYMENT, IF ANY, RECEIVED BY CELLPHONE-MATE, INC. FOR THE UNIT OF PRODUCT OR SERVICE FURNISHED OR TO BE FURNISHED, AS THE CASE MAY BE, WHICH IS THE SUBJECT OF CLAIM OR DISPUTE. IN NO EVENT SHALL SURECALL BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, HOWSOEVER CAUSED.All matters regarding this warranty shall be interpreted in accordance with the laws of the State of California, and any controversy that cannot be settled directly shall be settled by arbitration in California in accordance with the rules then prevailing of the American Arbitration Association, and judgment upon the award rendered may be entered in any court having jurisdiction thereof. If one or more provisions provided herein are held to be invalid or unenforceable under applicable law, then such provision shall be ineffective and excluded to the extent of such invalidity or unenforceability without affecting in any way the remaining provisions hereof.SureCall has made a good faith effort to ensure the accuracy of the information in this document and disclaims the implied warranties of merchantability and fitness for a particular purpose and makes no express warranties, except as may be stated in its written agreement with and for its customers. SureCall shall not be held liable to anyone for any indirect, special or consequential damages due to omissions or errors. The information and specifications in this document are subject to change without notice.© 2019. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners.|1-888-365-6283|********************13。
博实结北斗部标一体机BSJ-A6L使用说明书
博实结车载终端设备产品使用说明书法律声明：首先感谢阁下使用惠州市博实结科技有限公司(以下称为“博实结科技”)的产品。
如果您已同意以下条款，将获得我们提供的支持与服务。
当您对此有疑义，欢迎来电咨询。
若您不能接受以下条款,请停止使用本手册。
本文手册所有权归惠州市博实结科技有限公司。
保留任何未在本手册中明示授予的权利。
手册中涉及博实结科技的专有信息。
未经博实结科技事先书面许可,任何单位和个人不得复制、传递、分发、使用和泄漏该手册以及该手册包含的任何图片、表格、数据及其他信息。
“博实结”和“”是博实结科技的注册商标。
在未经博实结科技事先书面同意的情况下,阅读本文档并不表示以默示、不可反言或其他方式授予阅读者任何使用本文档中出现的任何标记的权利。
本产品的存放、使用应遵照产品手册、相关合同或相关法律、法规的要求进行。
本公司保留在不预先通知的情况下,对此手册中描述的产品进行修改和改进的权利;同时保留随时修订或收回本手册的权利。
本用户手册中如有文字不明之处,请您及时向本公司或者代理商、销售商咨询。
目录第一章产品组成及接口定义 (4)一、产品概况 (4)二、产品配置清单 (5)三、产品接口定义及接线说明 (6)第二章整机参数及功能操作说明 (8)一、产品整机参数表 (8)二、产品整机功能表 (8)三、产品安装操作流程 (9)第三章常见问题分析与售后服务 (13)一、常见问题分析 (13)二、注意事项 (14)三、售后服务 (14)第一章产品组成及接口定义一、产品概况汽车行驶记录仪是一款集定位、2G/3G/4G通讯、车辆远程监控于一体的车载监控终端。
内置行驶记录仪，即汽车“黑匣子”，方便交警执法和政府监管。
本产品可外装油量采集设备、温度采集设备使用；支持双IP、IC 卡登签、实时监控、拍照等功能；车载监控终端符合北斗部标北斗协议（JT/T794-2019、JT/T808-2019）、国标协议（GB/T19056-2012）等国家相关政策标准，可适用于两客一危、货运车、出租车、网约车、校车、押运车等车辆行业监管需求。
CE4M01使用说明书
引发火灾。
5
6. 若出现无声音、无图像，有水或小物漏入机
内，或出现冒烟、有异味时，请立即停止使
用本机，并送往购买处或售后服务中心处理 ；
6
若继续使用则可能导致火灾或其它事故。
7. 驾驶时请将音量调到适当大小，音量过大会干扰驾驶员听取车外讯息。
目 录
基本操作.................................................. 1 开 / 关机........................................................1 进入主桌面及其功能简介......................1 图标移动........................................................1 设置时间........................................................1 音量调节........................................................1
VCD/DVD 播放控制菜单.......................6 CD 播放控制菜单......................................7 USB/SD/ 音视频碟播放控制菜单......7 蓝牙免提电话和音乐.......................... 9 蓝牙配对........................................................9 断开移动设备........................................... 10 拨打电话..................................................... 10 接听电话..................................................... 10 移动设备音乐........................................... 11 调整蓝牙设置........................................... 11 蓝牙一键通导航................................... 12 调节音效.................................................. 13 调整设置.................................................. 14 通用设置..................................................... 14 视频设置..................................................... 14 声音设置..................................................... 15 时间设置..................................................... 15 语言设置..................................................... 15 蓝牙设置..................................................... 15 DVD 级别设置.........................................16 音量设置..................................................... 16 其它........................................................... 17 收听其它设备中的音乐........................ 17 系统复位..................................................... 17 更换保险丝................................................ 17 导航功能..................................................... 17 可选功能..................................................... 17 倒车视频..................................................... 17 方向盘控制................................................ 18 产品信息.................................................. 19 故障排除.................................................. 20 附加信息.................................................. 21
车载电话的安装
车载通信、导航设备与饮水机的安装
二、 进行车载电话的安装 1.安装传声器
车载电话的安装
传声器的安装有以下两种方式： （1）将传声器安装在驾驶座左侧挡风玻璃的左 上角。 （2）将传声器安装在转向柱上。
车载电话的安装 一、 做好车载电话安装的准备工作
1.了解车载电话的类型
车载蜂窝电话主要由无线电发射/接收机、电话机和天线 等构成，一般用于高档商务车上，其应用不如车载手机免提 电话广泛。
车载通信、导航设备与饮水机的安装
车载电话的安装 一、 做好车载电话安装的准备工作
1.了解车载电话的类型
（2）车载手机免提电话。车载手机免提电话是用手机作 为通话器，配以声控系统，实现免提功能的车载电话。与车 载蜂窝电话相比，车载手机免提电话结构简单，安装方便， 成本低廉，是目前汽车主流的通信设备。
车载通信、导航设备与饮水机的安装
二、 进行车载电话的安装 2.室外天线两种；室内天线又分为 普通天线和真空吸盘天线。
（1）室内天线的安装。 ①普通天线的安装。将普通天线安装在前挡风玻璃的 右上角(以正常驾驶位为观察位)。
车载通信、导航设备与饮水机的安装
二、 进行车载电话的安装 2.安装天线
车载电话的安装
②真空吸盘天线的安装。一般将真空吸盘天线吸附在 前挡风玻璃的右上角。
（2）室外天线的安装。室外天线一般带吸铁底座，车 主可视具体情况选择安装位置，通常安装在后备厢左侧或 右侧。
车载通信、导航设备与饮水机的安装
二、 进行车载电话的安装 3.安装手柄
车载电话的安装
手柄一般有以下两种安装方式： （1）将手柄安装在中控台右边、副驾驶座前方。 （2）将手柄安装在中控台左边、驾驶座前方。
车载电台的安装和使用
车载电台的安装和使用车载电台的安装并不复杂，如果有一定的汽车电器系统的维修改装经验，稍微熟悉安装电台车型的结构基本都能完成。
如果对汽车不太熟悉，可以考虑委托给汽车修理厂、汽车电器改装店（例如汽车音响改装店）来完成。
不过一般的修理厂、改装店对电台这种高频设备不太熟悉，特别是天馈线部分的安装。
这需要在改装前与对方有一个充分的沟通和说明，避免出现问题。
说说主机的安装根据厂商、型号、配置的不同，车载电台体积大小和安装方式各异。
一般包含整体式安装的电台和分体式安装的电台。
整体式电台与普通汽车收音机或汽车音响类似。
如果汽车控制台面板有空余的安装槽，利用配套的安装支架可以将电台安装在汽车音响中控台上方或下方。
这种安装方式占用车内活动空间最小，如果电台与汽车装饰面板配合得当，外观还是令人满意的。
不过这种安装方式也有一些局限：1、影响散热。
电台塞在中控台面板下，通风受到阻碍，不利于散热。
长时间连续使用电台会出现电台过热自保护的现象，如果电台没有过热保护功能很可能会直接损坏电台。
2、布线麻烦。
电台需要的供电线和天线馈线等需要塞到狭小的中控台面板内部空间，布线时需要拆卸过多的外部装饰条，或采用特殊的穿线方法穿线。
如果使用粗硬的天线馈线，这种安装形式可能会碰到很多意想不到的麻烦。
3、拆卸不便。
喜欢玩电台的朋友，出于各种原因经常要把电台拆下。
这对于暗藏在汽车控制台面板下面的电台来讲，装和拆都会很麻烦，汽车的控制台面板反复拆卸也很容易损坏。
4、无法安装。
电台与汽车中控台安装空槽配套的机会不多。
要不电台太大塞不进安装槽，要不电台太小与汽车控制台面板间隙太大，要不安装槽太浅电台塞不到底。
特别是现在的私家轿车，无论哪种车型内饰档次都比十年前提升很多。
部件间的接缝减小了；安装螺孔固件都掩藏得很隐蔽；装饰板材料也显得高档。
在这种情况下要破坏原车内饰安装电台，可能多数车主都不愿意。
大多数的整体式电台多是选择在中控台安装插槽以外安装。
电台通常会附赠一套可以调整安装角度方便使用者观察前面板的支架，支架上有椭圆形安装孔。
使用车载电话的流程
使用车载电话的流程准备工作1.确保车辆已经安装了车载电话设备。
2.确认车载电话的SIM卡已经插入并可正常工作。
3.打开车载电话设备的电源。
拨打电话1.在车辆中心控制台或方向盘上找到电话按钮。
2.按下电话按钮，车载电话系统将自动启动。
3.在车载电话显示屏上，输入您想要拨打的电话号码。
您可以使用按钮或者触摸屏进行输入。
4.确认电话号码是否正确，然后按下拨号按钮。
接听电话1.当有来电时，车载电话系统会发出声音提示和显示来电号码。
2.按下接听按钮或者接听电话的控制杆，您可以接听来电。
3.如果您希望使用蓝牙耳机或者车载音响系统进行通话，您可以在接听电话时进行切换。
结束电话1.当通话结束后，您可以按下挂断按钮或者挂断电话的控制杆来结束电话。
2.在结束电话后，车载电话系统会自动断开电话连接，并返回到待机界面。
其他功能1.通话记录–车载电话系统会自动记录您的已拨打、已接听和未接听的电话号码和通话时间。
–您可以通过车载电话系统的通话记录功能来查看并管理这些通话记录。
2.电话簿–您可以将常用的电话号码保存在车载电话系统的电话簿中。
–通过电话簿功能，您可以快速查找并拨打这些电话号码。
3.蓝牙连接–如果您的手机支持蓝牙功能，您可以将手机与车载电话系统进行蓝牙连接。
–这样，您可以通过车载电话系统来管理手机通话，实现免提通话和电话本同步等功能。
4.语音控制–部分车载电话系统支持语音控制功能。
–您可以使用车载电话系统的语音控制功能来拨打电话、接听电话、查看通话记录等。
注意事项1.在行驶过程中，为了安全起见，请尽量避免使用车载电话系统。
2.如果需要拨打或接听电话，请选择合适的时间和地点，确保您的注意力不会分散。
3.在操作车载电话系统时，请遵守交通法规并保持对道路的注意力。
4.如果您发现车载电话系统存在故障或异常，请及时向相关厂家或服务中心进行咨询和维修。
通过车载电话系统，您可以方便地进行通话，同时确保驾驶安全。
请按照以上流程正确地使用车载电话系统，并注意遵守交通规则，确保行车安全。
车载终端指导手册PPT全面版本
上海航盛车载终端介绍中国车载电子航母企业打造百亿集团,成为世界级、国际化的汽车电子优秀供应商目录车载终端背景概述车载终端产品介绍车载终端接插件图解展示车载终端安装上线步骤图解车载终端注销/升级/测试常见问题答疑售后服务网络体系1背景概述1.2011年8月1日起，新出厂的旅游包车、三类以上班线客车和运输危险化学品、烟花爆竹、民用爆炸物品的车辆（以下简称两客一危车辆），在车辆出厂前应安装符合标准的车载终端。
对于不符合标准的车辆，工业和信息化部不予上车辆产品公告。
道路运输管理部门在为车辆办理道路运输证时，要检查车辆车载终端安装和工作情况。
凡未按规定安装符合标准的车载终端的新增车辆，交通运输部门不予核发道路运输证。
2.建设符合技术要求的系统平台。
《平台标准》分别对企业监控平台和交通运输部门监管平台的性能及功能提出了基本要求。
道路运输企业自建或委托卫星定位服务运营商建立的监控平台以及各级交通运输部门建设的监管平台都必须符合标准要求。
在此基础上，可根据自身需求，研究开发其他功能。
从2011年7月1日起，所有新安装的车载终端必须接入符合技术要求的系统平台。
系统平台如不符合《平台标准》的，要按《平台标准》技术要求尽快进行改造。
在系统平台改造过程中要采取有效措施，确保现有业务不受影响，并确保各级系统平台之间的互联互通。
各系统平台的改造工作，要在2011年底前完成。
交通运输部办公厅2011年4月12日印发交通运输办公厅通知交通部第一批车载终端企业公告车载终端及系统平台引用标准GB/T 19056 记录仪标准征求意见稿JT/T/794 道路运输车辆卫星定位系统车载终端技术要求GB 17859 计算机信息系统安全保护等级划分标准GB 20263 导航电子地图安全处理技术基本要求JT/T/796 道路运输车辆卫星定位系统平台技术要求 JT/T/796 道路运输车辆卫星定位系统平台技术要求标准宣贯材料JT/T 809 道路运输车辆卫星定位系统-平台数据交换JT/T 808 道路运输车辆卫星定位系统-终端通讯协议及数据格式本方案提及、引用、继承下列文件内容，下列文件对本方案的应用是必不可少的。