ISO技术委员会中英对照2015年12月更新(可编辑修改word版)

合集下载

ISO14001-2015 中英文对照版_修正版

3.1 Terms related to organization and leadership..
3.2 Terms related to planning............
3.3 Terms related to support and operation.....................
Societal expectations for sustainable development,transparencyand accountability have evolved with increasingly stringent legislation, growing pressures on the environment from pollution, inefficient use of resources, improper waste management, climate change, degradation of ecosystems and loss of biodiversity.
Environmental management systems — Requirements with guidance for use
ISO 14001:2015(E)
Third edition
2015-09-15
Introduction.............................
9.2 Internal audit......................
9.2.1 General....................
9.2.2 Internal audit programme..........
9.3 Management review................

ISO9001-2015中文版(完整)

ISO9001：2015标准目录1 范围2 规范性引用文件3 术语和定义4 组织的背景4.1 理解组织及其背景4.2 理解相关方的需求和期望4.3 质量管理体系范围的确定4.4 质量管理体系5 领导作用5.1 领导作用和承诺5.2 质量方针5.3 组织的作用、职责和权限6 策划6.1 风险和机遇的应对措施6.2 质量目标及其实施的策划6.3 变更的策划7 支持7.1 资源7.2 能力7.3 意识7.4 沟通7.5 形成文件的信息8 运行8.1 运行的策划和控制8.2 市场需求的确定和顾客沟通8.3 运行策划过程8.4 外部供应产品和服务的控制8.5 产品和服务开发8.6 产品生产和服务提供8.7 产品和服务放行8.8 不合格产品和服务9 绩效评价9.1 监视、测量、分析和评价9.2 内部审核9.3 管理评审10 持续改进10.1 不符合和纠正措施10.2 改进附录A 质量管理原则文献1 范围本标准为有下列需求的组织规定了质量管理体系要求：a)需要证实其具有稳定地提供满足顾客要求和适用法律法规要求的产品和服务的能力；b)通过体系的的有效应用，包括体系持续改进的过程，以及保证符合顾客和适用的法律法规要求，旨在增强顾客满意。

注1：在本标准一中，术语“产品”仅适用于：a) 预期提供给顾客或顾客所要求的商品和服务；b) 运行过程所产生的任何预期输出。

注2：法律法规要求可称作为法定要求。

2 规范性引用文件下列文件中的条款通过本标准的引用而构成本标准的条款。

凡是注日期的引用文件，只有引用的版本适用。

凡是不注日期的引用文件，其最新版本（包括任何修订)适用于本标准。

ISO9000：2015 质量管理体系基础和术语3 术语和定义本标准采用ISO9000：2015 中所确立的术语和定义。

4 组织的背景环境4.1 理解组织及其背景环境组织应确定外部和内部那些与组织的宗旨、战略方向有关、影响质量管理体系实现预期结果的能力的事务。

ISO IS 9001-2015中文版(2015年10月1日)

ISO 9001:2015 质量管理体系要求中国首席质量官俱乐部编发2015年10月1日目录前言 (I)引言 (II)0.1 总则 (II)0.2 质量管理原则 (II)0.3 过程方法 (III)0.4 与其他管理体系标准的关系 (V)1. 范围 (1)2 规范性引用文件 (1)3 术语和定义 (1)4 组织环境 (1)4.1 理解组织及其环境 (1)4.2 理解相关方的需求和期望 (1)4.3 确定质量管理体系的范围 (1)4.4 质量管理体系及其过程 (2)5 领导作用 (2)5.1 领导作用和承诺 (2)5.1.1 总则 (2)5.1.2 以顾客为关注焦点 (2)5.2 方针 (3)5.2.1 制定质量方针 (3)5.2.2 沟通质量方针 (3)5.3 组织的岗位、职责和权限 (3)6 策划 (3)6.1 应对风险和机遇的措施 (3)6.2 质量目标及其实现的策划 (4)6.3 变更的策划 (4)7 支持 (4)7.1 资源 (4)7.2 能力 (6)7.3 意识 (6)7.4 沟通 (6)7.5 形成文件的信息 (6)8 运行 (7)8.2 产品和服务的要求 (7)8.2.1 顾客沟通 (7)8.2.2 与产品和服务的要求的确定 ..... .. (7)8.2.3 产品和服务的要求的评审 (8)8.2.4 产品和服务要求的更改 (8)8.3 产品和服务的设计和开发 (8)8.3.1 总则 (8)8.3.2 设计和开发策划 (8)8.3.3 设计和开发输入 (8)8.3.4 设计和开发控制 (9)8.3.5 设计和开发输出 (9)8.3.6 设计和开发更改 (9)8.4 外部提供过程、产品和服务的控制 (9)8.4.1总则 (9)8.4.2 控制类型和程度 (10)8.5 生产和服务提供 (10)8.6 产品和服务的放行 (11)8.7不合格输出的控制 (12)9 绩效评价 (12)9.1 监视、测量、分析和评价 (12)9.2 内部审核 (13)9.3 管理评审 (13)10 持续改进 (14)10.1总则 (14)10.2 不合格和纠正措施 (14)10.3 持续改进 (15)附录A（资料性附录） (16)附录B（资料性附录） (19)参考文献 (22)国际标准化组织（ISO）是由各国标准化团体（ISO成员团体）组成的世界性的联合会。

ISO9001：2015完全翻译版

ISO9001:2015质量管理体系要求原文翻译完全版1 范围本标准为有下列需求的组织规定了质量管理体系要求：a）需要证实其具有稳定地提供满足顾客要求和适用法律法规要求的产品和服务的能力；b）通过体系的的有效应用，包括体系持续改进的过程，以及保证符合顾客和适用的法律法规要求，旨在增强顾客满意。

注 1：在本标准一中，术语“产品”仅适用于：预期提供给顾客或顾客所要求的商品和服务；注 2：法律法规要求可称作为法定要求。

2 规范性引用文件下列文件中的条款通过本标准的引用而构成本标准的条款。

凡是注日期的引用文件，只有引用的版本适用。

凡是不注日期的引用文件，其最新版本（包括任何修订）适用于本标准。

ISO9000：2015 质量管理体系-基础和术语3 术语和定义本标准采用ISO9000：2015 中所确立的术语和定义。

4 组织的背景环境4.1 理解组织及其背景环境组织应确定哪些与其宗旨和战略方向有关且影响质量管理体系实现其预期结果的能力的外部和内部情况。

组织应监视和评审这外部和内部情况的信息。

注 1：事宜可能是正面和负面的因素或要考虑的情况注 2：理解外部的环境，可以通过考虑源于国际、国家、地区的或本地的法律法规、技术、竞争、市场、文化、社会和经济环境的情况，促进对外部情境的了解。

注3：理解组织内部环境，可以通过考虑与价值、文化、知识和组织绩效有关的情况，促进对内部情境的了解。

4.2 理解相关方的需求和期望：出于对组织持续地提供满足顾客和适用法律法规要求的产品和服务的能力的影响或潜在影响，组织应确定：a）与质量管理体系有关的相关方；b）与质量管理体系有关的相关方的要求。

组织应监视和评审有关相关方及其有关要求的信息。

4.3 确定质量管理体系的范围组织应界定质量管理体系的边界和应用，以确定其范围。

在确定此范围时，组织应考虑：a）标准 4.1 条款中提到的内部和外部情况；b）标准 4.2 条款中涉及的有关相关方的要求；c）组织的产品和服务。

iso90012015版质量管理体系 (中文版本),iso9001,iso14001,iso450

ISO90012015版质量管理体系(中文版本),ISO9001,ISO14001,ISO450...ISO9001：2015 质量管理体系标准编译稿说明针对ISO9001:2008 标准的修订，由ISO/TC176/SC2（国际标准化组织/质量管理和质量保证技术委员会/质量体系分委员会)负责起草的征求意见稿已经发布。

原稿为英文版，编译整理。

本编译稿便于大家了解新版标准的大体修订方向，后续正式版将会有更多修订，一切以最终正式版为准。

【导读】ISO9001：2015新版（CD草稿)，再也见不到《质量手册》和《程序文件》这类中国人最难以理解的文件形式了，统一用“形成文件的信息”取而代之。

通篇也见不到“记录”这两个字眼了，统一用“活动结果的证据” 取而代之。

ISO9001：2015新版（CD草稿)标准大量篇幅要求将“活动结果的信息（证据)形成文件”！注意：这里是绝对不能断章取义的理解为“活动的信息（证据)形成文件”的。

如：ISO9001：2015新版（CD草稿)8.2.3条款“与产品和服务有关要求的评审”仍然强调“评审结果的信息应形成文件”、ISO9001：2015新版（CD草稿)8.4.2条款“外部供方的控制类型和程序”仍然强调“评价结果的信息应形成文件”、ISO9001：2015新版（CD草稿)9.3条款“管理评审”仍然强调“管理评审结果的证据”、ISO9001：2015新版（CD草稿)9.1.3条款“数据分析和评价”仍然强调“数据分析和评价结果”……还要特别强调的是，同老版本一样，ISO9001：2015新版（CD草稿)标准几乎每个条款用的都是“动词”，如评审、验证、确认……等；也就是说：ISO9001：2015新版关注的仍然是：你是否有“动作”（即：实干兴邦)。

通篇见不到“记录”这两个字眼就是明证！因此，关注“动作”的存在和有效性，新版本比老版本有进一步的强化！期待认证行业权威人士、审核员、咨询师、培训师、质量管理专家深入沟通、交流、共同探讨ISO9001：2015新版标准的真实“意图”，抛弃“形式化”，力求“有效性”！我们将定期向社会各界公开ISO9001新版标准的资讯、最新动向、培训信息。

ISO新编中英文对照

Information technology- Security techniques-Information security management systems-Requirements 信息技术-安全技术-信息安全管理体系-要求Foreword前言ISO (the International Organization for Standardization) and IEC (the International Electro technical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.ISO（国际标准化组织）和IEC（国际电工委员会）是为国际标准化制定专门体制的国际组织。

ISOTS标准中英对照修订稿

I S O T S标准中英对照集团标准化工作小组 [Q8QX9QT-X8QQB8Q8-NQ8QJ8-M8QMN]Quality management systems —Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations质量管理体系汽车生产件及相关维修零件组织应用GB/T19001- 2000的特别要求ForewordISO 前言ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission(IEC) on all matters of electrotechnical standardization.国际标准化组织（ISO ）是由国际标准化团体（ISO 成员团体）组成的世界生的联合会。

ISO9001-2015 中英对照

ISO/FDIS 9001：2015Quality management systems —Requirements质量管理体系-要求Introduction引言0.1 General 总则The adoption of a quality management system is a strategic decision for an organization that can helpto improve its overall performance and provide a sound basis for sustainable development initiatives. The potential benefits to an organization of implementing a quality management system based on this International Standard are:a) the ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements;b) facilitating opportunities to enhance customer satisfaction;c) addressing risks and opportunities associated with its context and objectives;d) the ability to demonstrate conformity to specified quality management system requirements.This International Standard can be used by internal and external parties.It is not the intent of this International Standard to imply the need for:— uniformity in the structure of different quality management systems;— alignment of documentation to the clause structure of this International Standard;— the use of the specific terminology of this International Standard within the organization.The quality management system requirements specified in this International Standard are complementary to requirements for products and services.This International Standard employs the process approach, which incorporates the Plan-Do-Check-Act (PDCA) cycle and risk-based thinking.The process approach enables an organization to plan its processes and their interactions.The PDCA cycle enables an organization to ensure that its processes are adequately resourced and managed, and that opportunities for improvement are determined and acted on.Risk-based thinking enables an organization to determine the factors that could cause its processes and its quality management system to deviate from the planned results, to put in place preventive controls to minimize negative effects and to make maximum use of opportunities as they arise (see Clause A.4). Consistently meeting requirements and addressing future needs and expectations poses a challenge for organizations in an increasingly dynamic and complex environment. To achieve this objective, the organization might find it necessary to adopt various forms of improvement in addition to correction and continual improvement, such as breakthrough change, innovation and re-organization.In this International Standard, the following verbal forms are used:—“shall” indicates a requirement;—“should” indicates a recommendation;—“may” indicates a permission;—“can” indicates a possibility or a capability.Information marked as “NOTE” is for guidance in understanding or clarifying the associated requirement.采用质量管理体系应该是组织的一项战略性决策，可以帮助组织改进其整体绩效，并为可持续发展计划提供良好的基础。

ISO 9001 2015 中英文

strategic direction of the organization. Management of the processes and the system as a whole can be achieved using the PDCA cycle (see 0.3.2) with an overall focus on risk-based thinking (see 0.3.3) aimed at taking advantage of opportunities and preventing undesirable results.The application of the process approach in a quality management system enables:a) understanding and consistency in meeting requirements; b) the consideration of processes in terms of added value; c) the achievement of effective process performance;d) improvement of processes based on evaluation of data and information.Figure 1 gives a schematic representation of any process and shows the interaction of its elements. The monitoring and measuring check points, which are necessary for control, are specific to each process and will vary depending on the related risks.Figure 1 — Schematic representation of the elements of a single process0.3.2 Plan-Do-Check-Act cycleThe PDCA cycle can be applied to all processes and to the quality management system as a whole. Figure 2 illustrates how Clauses 4 to 10 can be grouped in relation to the PDCA cycle.NOTE Numbers in brackets refer to the clauses in this International 维（见0.3.3）对过程和整个体系进行管理，旨在有效利用机遇并防止发生不良结果。

(完整版)ISO技术委员会中英对照2015年12月更新

Committee Title ISOTC working area Standards published Work programme ISO/IEC JTC 1Information technology ISO/IEC JTC 1 home2918543ISO/IEC JPC 2Joint Project Committee - Energy efficiencyISO/IEC JPC 2 home20 and renewable energy sources - CommonterminologyISO/TC 1Screw threads ISO/TC 1 home233ISO/TC 2Fasteners ISO/TC 2 home19236ISO/TC 4Rolling bearings ISO/TC 4 home7828ISO/TC 5Ferrous metal pipes and metallic fittings ISO/TC 5 home6710ISO/TC 6Paper, board and pulps ISO/TC 6 home17928ISO/TC 8Ships and marine technology ISO/TC 8 home29482ISO/TC 10Technical product documentation ISO/TC 10 home15024ISO/TC 11Boilers and pressure vessels - STANDBY ISO/TC 11 home20ISO/TC 12Quantities and units ISO/TC 12 home1619ISO/TC 14Shafts for machinery and accessories ISO/TC 14 home80ISO/TC 17Steel ISO/TC 17 home31351ISO/TC 18Zinc and zinc alloys - STANDBY ISO/TC 18 home100ISO/TC 19Preferred numbers - STANDBY ISO/TC 19 home30ISO/TC 20Aircraft and space vehicles ISO/TC 20 home641111Committee Title ISOTC working area Standards published Work programme ISO/TC 21Equipment for fire protection and fire fighting ISO/TC 21 home9636ISO/TC 22Road vehicles ISO/TC 22 home816216ISO/TC 23 home37171ISO/TC 23Tractors and machinery for agriculture andforestryISO/TC 24Particle characterization including sieving ISO/TC 24 home6212ISO/TC 25Cast irons and pig irons ISO/TC 25 home175ISO/TC 26Copper and copper alloys ISO/TC 26 home340ISO/TC 27Solid mineral fuels ISO/TC 27 home10219ISO/TC 28Petroleum products and related products ofISO/TC 28 home25138 synthetic or biological originISO/TC 29Small tools ISO/TC 29 home44883ISO/TC 30Measurement of fluid flow in closed conduits ISO/TC 30 home428ISO/TC 31Tyres, rims and valves ISO/TC 31 home7726ISO/TC 33Refractories ISO/TC 33 home862ISO/TC 34Food products ISO/TC 34 home837113ISO/TC 35Paints and varnishes ISO/TC 35 home23594ISO/TC 36Cinematography ISO/TC 36 home1185Committee Title ISOTC working area Standards published Work programmeISO/TC 37 home4522ISO/TC 37Terminology and other language and contentresourcesISO/TC 38Textiles ISO/TC 38 home37647ISO/TC 39Machine tools ISO/TC 39 home16930ISO/TC 41Pulleys and belts (including veebelts) ISO/TC 41 home825ISO/TC 42Photography ISO/TC 42 home18517ISO/TC 43Acoustics ISO/TC 43 home20157ISO/TC 44Welding and allied processes ISO/TC 44 home30680ISO/TC 45Rubber and rubber products ISO/TC 45 home439113ISO/TC 46Information and documentation ISO/TC 46 home11319ISO/TC 47Chemistry ISO/TC 47 home1180ISO/TC 48Laboratory equipment ISO/TC 48 home1104ISO/TC 51 home161ISO/TC 51Pallets for unit load method of materialshandlingISO/TC 52Light gauge metal containers ISO/TC 52 home100ISO/TC 54Essential oils ISO/TC 54 home13410ISO/TC 58Gas cylinders ISO/TC 58 home9629ISO/TC 59Buildings and civil engineering works ISO/TC 59 home11718Committee Title ISOTC working area Standards published Work programme ISO/TC 60Gears ISO/TC 60 home6311ISO/TC 61Plastics ISO/TC 61 home672112ISO/TC 63Glass containers ISO/TC 63 home320ISO/TC 67 home19879ISO/TC 67Materials, equipment and offshore structuresfor petroleum, petrochemical and natural gasindustriesISO/TC 68Financial services ISO/TC 68 home5118ISO/TC 69Applications of statistical methods ISO/TC 69 home10139ISO/TC 70Internal combustion engines ISO/TC 70 home6813ISO/TC 71Concrete, reinforced concrete and pre-stressedISO/TC 71 home4020 concreteISO/TC 72Textile machinery and accessories ISO/TC 72 home1978ISO/TC 74Cement and lime ISO/TC 74 home80ISO/TC 76 home6616ISO/TC 76Transfusion, infusion and injection, and bloodprocessing equipment for medical andpharmaceutical useISO/TC 77Products in fibre reinforced cement ISO/TC 77 home51ISO/TC 79Light metals and their alloys ISO/TC 79 home11715Committee Title ISOTC working area Standards published Work programmeISO/TC 81 home103ISO/TC 81Common names for pesticides and otheragrochemicalsISO/TC 82Mining ISO/TC 82 home369ISO/TC 83 home6726ISO/TC 83Sports and other recreational facilities andequipmentISO/TC 84Devices for administration of medicinalISO/TC 84 home2915 products and cathetersISO/TC 85 home19161ISO/TC 85Nuclear energy, nuclear technologies, andradiological protectionISO/TC 86Refrigeration and air-conditioning ISO/TC 86 home298ISO/TC 87Cork ISO/TC 87 home4412ISO/TC 89Wood-based panels ISO/TC 89 home467ISO/TC 91Surface active agents ISO/TC 91 home802ISO/TC 92Fire safety ISO/TC 92 home12731ISO/TC 93 home260ISO/TC 93Starch (including derivatives and by-products)ISO/TC 94Personal safety -- Protective clothing andISO/TC 94 home12856 equipmentISO/TC 96Cranes ISO/TC 96 home10717Committee Title ISOTC working area Standards published Work programme ISO/TC 98Bases for design of structures ISO/TC 98 home222ISO/TC 100 home150ISO/TC 100Chains and chain sprockets for powertransmission and conveyorsISO/TC 101 home330ISO/TC 101Continuous mechanical handling equipment -STANDBYISO/TC 102Iron ore and direct reduced iron ISO/TC 102 home7611ISO/TC 104Freight containers ISO/TC 104 home4515ISO/TC 105Steel wire ropes ISO/TC 105 home284ISO/TC 106Dentistry ISO/TC 106 home17159ISO/TC 107Metallic and other inorganic coatings ISO/TC 107 home13433ISO/TC 108Mechanical vibration, shock and conditionISO/TC 108 home17438 monitoringISO/TC 109Oil and gas burners ISO/TC 109 home20ISO/TC 110Industrial trucks ISO/TC 110 home6513ISO/TC 111Round steel link chains, chain slings,ISO/TC 111 home211 components and accessoriesISO/TC 112Vacuum technology ISO/TC 112 home206ISO/TC 113Hydrometry ISO/TC 113 home6416Committee Title ISOTC working area Standards published Work programme ISO/TC 114Horology ISO/TC 114 home345ISO/TC 115Pumps ISO/TC 115 home244ISO/TC 117Fans ISO/TC 117 home278ISO/TC 118 home7413ISO/TC 118Compressors and pneumatic tools, machinesand equipmentISO/TC 119Powder metallurgy ISO/TC 119 home729ISO/TC 120Leather ISO/TC 120 home214ISO/TC 121Anaesthetic and respiratory equipment ISO/TC 121 home9030ISO/TC 122Packaging ISO/TC 122 home7522ISO/TC 123Plain bearings ISO/TC 123 home7525ISO/TC 126Tobacco and tobacco products ISO/TC 126 home6611ISO/TC 127Earth-moving machinery ISO/TC 127 home15542ISO/TC 130Graphic technology ISO/TC 130 home8320ISO/TC 131Fluid power systems ISO/TC 131 home22043ISO/TC 132Ferroalloys ISO/TC 132 home302ISO/TC 133Clothing sizing systems - size designation,ISO/TC 133 home1410 size measurement methods and digital fittingsISO/TC 134Fertilizers and soil conditioners ISO/TC 134 home3426Committee Title ISOTC working area Standards published Work programme ISO/TC 135Non-destructive testing ISO/TC 135 home7423ISO/TC 136Furniture ISO/TC 136 home259ISO/TC 137 home32ISO/TC 137Footwear sizing designations and markingsystemsISO/TC 138Plastics pipes, fittings and valves for theISO/TC 138 home31161 transport of fluidsISO/TC 142Cleaning equipment for air and other gases ISO/TC 142 home1314ISO/TC 145Graphical symbols ISO/TC 145 home3442ISO/TC 146Air quality ISO/TC 146 home15824ISO/TC 147Water quality ISO/TC 147 home28939ISO/TC 148Sewing machines ISO/TC 148 home30ISO/TC 149Cycles ISO/TC 149 home283ISO/TC 150Implants for surgery ISO/TC 150 home14164ISO/TC 153Valves ISO/TC 153 home255ISO/TC 154Processes, data elements and documents inISO/TC 154 home232 commerce, industry and administrationISO/TC 155Nickel and nickel alloys ISO/TC 155 home4211ISO/TC 156Corrosion of metals and alloys ISO/TC 156 home8013Committee Title ISOTC working area Standards published Work programme ISO/TC 157Non-systemic contraceptives and STI barrierISO/TC 157 home108 prophylacticsISO/TC 158Analysis of gases ISO/TC 158 home232ISO/TC 159Ergonomics ISO/TC 159 home12329ISO/TC 160Glass in building ISO/TC 160 home4118ISO/TC 161Control and protective devices for gas and/orISO/TC 161 home135 oil burners and appliancesISO/TC 162Doors and windows ISO/TC 162 home200ISO/TC 163 home12052ISO/TC 163Thermal performance and energy use in thebuilt environmentISO/TC 164Mechanical testing of metals ISO/TC 164 home8927ISO/TC 165Timber structures ISO/TC 165 home3720ISO/TC 166 home62ISO/TC 166Ceramic ware, glassware and glass ceramicware in contact with foodISO/TC 167Steel and aluminium structures ISO/TC 167 home21ISO/TC 168Prosthetics and orthotics ISO/TC 168 home234ISO/TC 170Surgical instruments ISO/TC 170 home61ISO/TC 171Document management applications ISO/TC 171 home8812Committee Title ISOTC working area Standards published Work programme ISO/TC 172Optics and photonics ISO/TC 172 home29974ISO/TC 173Assistive products for persons with disability ISO/TC 173 home8315ISO/TC 174Jewellery ISO/TC 174 home162ISO/TC 176Quality management and quality assurance ISO/TC 176 home237ISO/TC 178Lifts, escalators and moving walks ISO/TC 178 home388ISO/TC 179Masonry - STANDBY ISO/TC 179 home30ISO/TC 180Solar energy ISO/TC 180 home164ISO/TC 181Safety of toys ISO/TC 181 home96ISO/TC 182Geotechnics ISO/TC 182 home4915ISO/TC 183 home256ISO/TC 183Copper, lead, zinc and nickel ores andconcentratesISO/TC 184Automation systems and integration ISO/TC 184 home81643ISO/TC 185 home95ISO/TC 185Safety devices for protection againstexcessive pressureISO/TC 186Cutlery and table and decorative metalISO/TC 186 home91 hollow-wareISO/TC 188Small craft ISO/TC 188 home10522ISO/TC 189Ceramic tile ISO/TC 189 home288Committee Title ISOTC working area Standards published Work programme ISO/TC 190Soil quality ISO/TC 190 home15958ISO/TC 191Animal (mammal) traps - STANDBY ISO/TC 191 home20ISO/TC 192Gas turbines ISO/TC 192 home174ISO/TC 193Natural gas ISO/TC 193 home558ISO/TC 194Biological and clinical evaluation of medicalISO/TC 194 home3215 devicesISO/TC 195 home343ISO/TC 195Building construction machinery andequipmentISO/TC 197Hydrogen technologies ISO/TC 197 home1815ISO/TC 198Sterilization of health care products ISO/TC 198 home5219ISO/TC 199Safety of machinery ISO/TC 199 home4411ISO/TC 201Surface chemical analysis ISO/TC 201 home6414ISO/TC 202Microbeam analysis ISO/TC 202 home189ISO/TC 204Intelligent transport systems ISO/TC 204 home215104ISO/TC 205Building environment design ISO/TC 205 home2218ISO/TC 206Fine ceramics ISO/TC 206 home8741ISO/TC 207Environmental management ISO/TC 207 home3315Committee Title ISOTC working area Standards published Work programme ISO/TC 208Thermal turbines for industrial applicationISO/TC 208 home20 (steam turbines, gas expansion turbines) -STANDBYISO/TC 209 home125ISO/TC 209Cleanrooms and associated controlledenvironmentsISO/TC 210Quality management and correspondingISO/TC 210 home2217 general aspects for medical devicesISO/TC 211Geographic information/Geomatics ISO/TC 211 home7120ISO/TC 212 home2615ISO/TC 212Clinical laboratory testing and in vitrodiagnostic test systemsISO/TC 213Dimensional and geometrical productISO/TC 213 home13534 specifications and verificationISO/TC 214Elevating work platforms ISO/TC 214 home80ISO/TC 215Health informatics ISO/TC 215 home15150ISO/TC 216Footwear ISO/TC 216 home7327ISO/TC 217Cosmetics ISO/TC 217 home247ISO/TC 218Timber ISO/TC 218 home5712ISO/TC 219Floor coverings ISO/TC 219 home7813ISO/TC 220Cryogenic vessels ISO/TC 220 home2010Committee Title ISOTC working area Standards published Work programme ISO/TC 221Geosynthetics ISO/TC 221 home3619ISO/TC 222Personal financial planning - STANDBY ISO/TC 222 home10ISO/TC 224 home410ISO/TC 224Service activities relating to drinking watersupply systems and wastewater systems -Quality criteria of the service andperformance indicatorsISO/TC 225Market, opinion and social research ISO/TC 225 home22ISO/TC 226 home1188ISO/TC 226Materials for the production of primaryaluminiumISO/TC 227Springs ISO/TC 227 home63ISO/TC 228Tourism and related services ISO/TC 228 home228ISO/TC 229Nanotechnologies ISO/TC 229 home4637ISO/TC 232Learning services outside formal education ISO/TC 232 home22ISO/TC 234Fisheries and aquaculture ISO/TC 234 home91ISO/TC 238Solid biofuels ISO/TC 238 home2318ISO/TC 241Road traffic safety management systems ISO/TC 241 home10ISO/TC 242Energy Management ISO/TC 242 home62Committee Title ISOTC working area Standards published Work programme ISO/TC 244Industrial furnaces and associated processingISO/TC 244 home84 equipmentISO/PC 245Cross-border trade of second-hand goods ISO/PC 245 home11ISO/PC 248Sustainability criteria for bioenergy ISO/PC 248 home10ISO/TC 249Traditional chinese medicine ISO/TC 249 home530ISO/TC 251Asset management ISO/TC 251 home31ISO/PC 252Natural gas fuelling stations for vehicles ISO/PC 252 home0 2ISO/TC 254 home40ISO/TC 254Safety of amusement rides and amusementdevicesISO/TC 255Biogas ISO/TC 255 home0 1ISO/TC 256Pigments, dyestuffs and extenders ISO/TC 256 home972ISO/TC 257Evaluation of energy savings ISO/TC 257 home18ISO/TC 258 home25ISO/TC 258Project, programme and portfoliomanagementISO/TC 260Human resource management ISO/TC 260 home0 12ISO/TC 261Additive manufacturing ISO/TC 261 home55ISO/TC 262Risk management ISO/TC 262 home45ISO/TC 263Coalbed methane (CBM) ISO/TC 263 home20Committee Title ISOTC working area Standards published Work programme ISO/TC 264Fireworks ISO/TC 264 home0 9ISO/TC 265 home0 13ISO/TC 265Carbon dioxide capture, transportation, andgeological storageISO/TC 266Biomimetics ISO/TC 266 home21ISO/TC 267Facilities management ISO/TC 267 home0 3ISO/TC 268Sustainable development in communities ISO/TC 268 home37ISO/TC 269Railway applications ISO/TC 269 home0 4ISO/TC 270Plastics and rubber machines ISO/TC 270 home0 1ISO/TC 272Forensic sciences ISO/TC 272 home0 1ISO/PC 273Customer contact centres ISO/PC 273 home0 2ISO/TC 274Light and lighting ISO/TC 274 home163ISO/TC 275 home0 4ISO/TC 275Sludge recovery, recycling, treatment anddisposalISO/TC 276Biotechnology ISO/TC 276 home0 2ISO/PC 277Sustainable procurement ISO/PC 277 home0 1ISO/PC 278Anti-bribery management systems ISO/PC 278 home0 1ISO/TC 279Innovation management ISO/TC 279 home0 3ISO/PC 280Management Consultancy ISO/PC 280 home0 1Committee Title ISOTC working area Standards published Work programme ISO/TC 281Fine Bubble Technology ISO/TC 281 home0 1ISO/TC 282Water re-use ISO/TC 282 home39ISO/PC 283 home0 1ISO/PC 283Occupational health and safety managementsystemsISO/TC 285Clean cookstoves and clean cooking solutions ISO/TC 285 home0 5ISO/PC 286 home0 1ISO/PC 286Collaborative business relationshipmanagement -- FrameworkISO/PC 287 home0 1ISO/PC 287Chain of custody of wood and wood-basedproductsISO/PC 288Educational organizations managementISO/PC 288 home0 1 systems - Requirements with guidance for useISO/TC 289Brand evaluation ISO/TC 289 home11ISO/TC 290Online reputation ISO/TC 290 home0 1ISO/TC 291Domestic gas cooking appliances ISO/TC 291 home0 0ISO/TC 292Security and resilience ISO/TC 292 home2410ISO/TC 293Feed machinery ISO/TC 293 home0 0ISO/PC 294Guidance on unit pricing ISO/PC 294 home0 1ISO/PC 295Audit data collection ISO/PC 295 home0 0。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

ISO/IEC JTC 1Information technology ISO/IEC JTC 1 home2918543 ISO/IEC JPC 2Joint Project Committee - Energy efficiencyISO/IEC JPC 2 home20 and renewable energy sources - CommonterminologyISO/TC 1Screw threads ISO/TC 1 home233 ISO/TC 2Fasteners ISO/TC 2 home19236 ISO/TC 4Rolling bearings ISO/TC 4 home7828 ISO/TC 5Ferrous metal pipes and metallic fittings ISO/TC 5 home6710 ISO/TC 6Paper, board and pulps ISO/TC 6 home17928 ISO/TC 8Ships and marine technology ISO/TC 8 home29482 ISO/TC 10Technical product documentation ISO/TC 10 home15024 ISO/TC 11Boilers and pressure vessels - STANDBY ISO/TC 11 home20 ISO/TC 12Quantities and units ISO/TC 12 home1619 ISO/TC 14Shafts for machinery and accessories ISO/TC 14 home80 ISO/TC 17Steel ISO/TC 17 home31351 ISO/TC 18Zinc and zinc alloys - STANDBY ISO/TC 18 home100 ISO/TC 19Preferred numbers - STANDBY ISO/TC 19 home30 ISO/TC 20Aircraft and space vehicles ISO/TC 20 home641111ISO/TC 21Equipment for fire protection and fire fighting ISO/TC 21 home9636 ISO/TC 22Road vehicles ISO/TC 22 home816216ISO/TC 23 home37171 ISO/TC 23Tractors and machinery for agriculture andforestryISO/TC 24Particle characterization including sieving ISO/TC 24 home6212 ISO/TC 25Cast irons and pig irons ISO/TC 25 home175 ISO/TC 26Copper and copper alloys ISO/TC 26 home340 ISO/TC 27Solid mineral fuels ISO/TC 27 home10219 ISO/TC 28Petroleum products and related products ofISO/TC 28 home25138 synthetic or biological originISO/TC 29Small tools ISO/TC 29 home44883 ISO/TC 30Measurement of fluid flow in closed conduits ISO/TC 30 home428 ISO/TC 31Tyres, rims and valves ISO/TC 31 home7726 ISO/TC 33Refractories ISO/TC 33 home862 ISO/TC 34Food products ISO/TC 34 home837113 ISO/TC 35Paints and varnishes ISO/TC 35 home23594 ISO/TC 36Cinematography ISO/TC 36 home1185ISO/TC 38Textiles ISO/TC 38 home37647 ISO/TC 39Machine tools ISO/TC 39 home16930 ISO/TC 41Pulleys and belts (including veebelts)ISO/TC 41 home825 ISO/TC 42Photography ISO/TC 42 home18517 ISO/TC 43Acoustics ISO/TC 43 home20157 ISO/TC 44Welding and allied processes ISO/TC 44 home30680 ISO/TC 45Rubber and rubber products ISO/TC 45 home439113 ISO/TC 46Information and documentation ISO/TC 46 home11319 ISO/TC 47Chemistry ISO/TC 47 home1180 ISO/TC 48Laboratory equipment ISO/TC 48 home1104ISO/TC 51 home161 ISO/TC 51Pallets for unit load method of materialshandlingISO/TC 52Light gauge metal containers ISO/TC 52 home100 ISO/TC 54Essential oils ISO/TC 54 home13410 ISO/TC 58Gas cylinders ISO/TC 58 home9629 ISO/TC 59Buildings and civil engineering works ISO/TC 59 home11718ISO/TC 61Plastics ISO/TC 61 home672112 ISO/TC 63Glass containers ISO/TC 63 home320 ISO/TC 67Materials, equipment and offshore structuresISO/TC 67 home19879 for petroleum, petrochemical and natural gasindustriesISO/TC 68Financial services ISO/TC 68 home5118 ISO/TC 69Applications of statistical methods ISO/TC 69 home10139 ISO/TC 70Internal combustion engines ISO/TC 70 home6813ISO/TC 71 home4020 ISO/TC 71Concrete, reinforced concrete and pre-stressedconcreteISO/TC 72Textile machinery and accessories ISO/TC 72 home1978 ISO/TC 74Cement and lime ISO/TC 74 home80ISO/TC 76 home6616 ISO/TC 76Transfusion, infusion and injection, and bloodprocessing equipment for medical andpharmaceutical useISO/TC 77Products in fibre reinforced cement ISO/TC 77 home51 ISO/TC 79Light metals and their alloys ISO/TC 79 home11715ISO/TC 81 home103 ISO/TC 81Common names for pesticides and otheragrochemicalsISO/TC 82Mining ISO/TC 82 home369ISO/TC 83 home6726 ISO/TC 83Sports and other recreational facilities andequipmentISO/TC 84Devices for administration of medicinalISO/TC 84 home2915 products and cathetersISO/TC 85 home19161 ISO/TC 85Nuclear energy, nuclear technologies, andradiological protectionISO/TC 86Refrigeration and air-conditioning ISO/TC 86 home298 ISO/TC 87Cork ISO/TC 87 home4412 ISO/TC 89Wood-based panels ISO/TC 89 home467 ISO/TC 91Surface active agents ISO/TC 91 home802 ISO/TC 92Fire safety ISO/TC 92 home12731ISO/TC 93 home260 ISO/TC 93Starch (including derivatives and by-products)ISO/TC 94Personal safety -- Protective clothing andISO/TC 94 home12856 equipmentISO/TC 96Cranes ISO/TC 96 home10717ISO/TC 100Chains and chain sprockets for powerISO/TC 100 home150 transmission and conveyorsISO/TC 101 home330 ISO/TC 101Continuous mechanical handling equipment -STANDBYISO/TC 102Iron ore and direct reduced iron ISO/TC 102 home7611 ISO/TC 104Freight containers ISO/TC 104 home4515 ISO/TC 105Steel wire ropes ISO/TC 105 home284 ISO/TC 106Dentistry ISO/TC 106 home17159 ISO/TC 107Metallic and other inorganic coatings ISO/TC 107 home13433 ISO/TC 108Mechanical vibration, shock and conditionISO/TC 108 home17438 monitoringISO/TC 109Oil and gas burners ISO/TC 109 home20 ISO/TC 110Industrial trucks ISO/TC 110 home6513 ISO/TC 111Round steel link chains, chain slings,ISO/TC 111 home211 components and accessoriesISO/TC 112Vacuum technology ISO/TC 112 home206 ISO/TC 113Hydrometry ISO/TC 113 home6416ISO/TC 115Pumps ISO/TC 115 home244 ISO/TC 117Fans ISO/TC 117 home278ISO/TC 118 home7413 ISO/TC 118Compressors and pneumatic tools, machinesand equipmentISO/TC 119Powder metallurgy ISO/TC 119 home729 ISO/TC 120Leather ISO/TC 120 home214 ISO/TC 121Anaesthetic and respiratory equipment ISO/TC 121 home9030 ISO/TC 122Packaging ISO/TC 122 home7522 ISO/TC 123Plain bearings ISO/TC 123 home7525 ISO/TC 126Tobacco and tobacco products ISO/TC 126 home6611 ISO/TC 127Earth-moving machinery ISO/TC 127 home15542 ISO/TC 130Graphic technology ISO/TC 130 home8320 ISO/TC 131Fluid power systems ISO/TC 131 home22043 ISO/TC 132Ferroalloys ISO/TC 132 home302 ISO/TC 133Clothing sizing systems - size designation,ISO/TC 133 home1410 size measurement methods and digital fittingsISO/TC 134Fertilizers and soil conditioners ISO/TC 134 home3426ISO/TC 136Furniture ISO/TC 136 home259ISO/TC 137 home32 ISO/TC 137Footwear sizing designations and markingsystemsISO/TC 138Plastics pipes, fittings and valves for theISO/TC 138 home31161 transport of fluidsISO/TC 142Cleaning equipment for air and other gases ISO/TC 142 home1314 ISO/TC 145Graphical symbols ISO/TC 145 home3442 ISO/TC 146Air quality ISO/TC 146 home15824 ISO/TC 147Water quality ISO/TC 147 home28939 ISO/TC 148Sewing machines ISO/TC 148 home30 ISO/TC 149Cycles ISO/TC 149 home283 ISO/TC 150Implants for surgery ISO/TC 150 home14164 ISO/TC 153Valves ISO/TC 153 home255 ISO/TC 154Processes, data elements and documents inISO/TC 154 home232 commerce, industry and administrationISO/TC 155Nickel and nickel alloys ISO/TC 155 home4211 ISO/TC 156Corrosion of metals and alloys ISO/TC 156 home8013ISO/TC 157Non-systemic contraceptives and STI barrierISO/TC 157 home108 prophylacticsISO/TC 158Analysis of gases ISO/TC 158 home232 ISO/TC 159Ergonomics ISO/TC 159 home12329 ISO/TC 160Glass in building ISO/TC 160 home4118 ISO/TC 161Control and protective devices for gas and/orISO/TC 161 home135 oil burners and appliancesISO/TC 162Doors and windows ISO/TC 162 home200ISO/TC 163 home12052 ISO/TC 163Thermal performance and energy use in thebuilt environmentISO/TC 164Mechanical testing of metals ISO/TC 164 home8927 ISO/TC 165Timber structures ISO/TC 165 home3720ISO/TC 166 home62 ISO/TC 166Ceramic ware, glassware and glass ceramicware in contact with foodISO/TC 167Steel and aluminium structures ISO/TC 167 home21 ISO/TC 168Prosthetics and orthotics ISO/TC 168 home234 ISO/TC 170Surgical instruments ISO/TC 170 home61 ISO/TC 171Document management applications ISO/TC 171 home8812ISO/TC 172Optics and photonics ISO/TC 172 home29974 ISO/TC 173Assistive products for persons with disability ISO/TC 173 home8315 ISO/TC 174Jewellery ISO/TC 174 home162 ISO/TC 176Quality management and quality assurance ISO/TC 176 home237 ISO/TC 178Lifts, escalators and moving walks ISO/TC 178 home388 ISO/TC 179Masonry - STANDBY ISO/TC 179 home30 ISO/TC 180Solar energy ISO/TC 180 home164 ISO/TC 181Safety of toys ISO/TC 181 home96 ISO/TC 182Geotechnics ISO/TC 182 home4915ISO/TC 183 home256 ISO/TC 183Copper, lead, zinc and nickel ores andconcentratesISO/TC 184Automation systems and integration ISO/TC 184 home81643ISO/TC 185 home95 ISO/TC 185Safety devices for protection againstexcessive pressureISO/TC 186Cutlery and table and decorative metalISO/TC 186 home91 hollow-wareISO/TC 188Small craft ISO/TC 188 home10522 ISO/TC 189Ceramic tile ISO/TC 189 home288ISO/TC 191Animal (mammal) traps - STANDBY ISO/TC 191 home20 ISO/TC 192Gas turbines ISO/TC 192 home174 ISO/TC 193Natural gas ISO/TC 193 home558 ISO/TC 194Biological and clinical evaluation of medicalISO/TC 194 home3215 devicesISO/TC 195 home343 ISO/TC 195Building construction machinery andequipmentISO/TC 197Hydrogen technologies ISO/TC 197 home1815 ISO/TC 198Sterilization of health care products ISO/TC 198 home5219 ISO/TC 199Safety of machinery ISO/TC 199 home4411 ISO/TC 201Surface chemical analysis ISO/TC 201 home6414 ISO/TC 202Microbeam analysis ISO/TC 202 home189 ISO/TC 204Intelligent transport systems ISO/TC 204 home215104 ISO/TC 205Building environment design ISO/TC 205 home2218 ISO/TC 206Fine ceramics ISO/TC 206 home8741 ISO/TC 207Environmental management ISO/TC 207 home3315ISO/TC 208 home20 ISO/TC 208Thermal turbines for industrial application(steam turbines, gas expansion turbines) -STANDBYISO/TC 209 home125 ISO/TC 209Cleanrooms and associated controlledenvironmentsISO/TC 210Quality management and correspondingISO/TC 210 home2217 general aspects for medical devicesISO/TC 211Geographic information/Geomatics ISO/TC 211 home7120ISO/TC 212 home2615 ISO/TC 212Clinical laboratory testing and in vitrodiagnostic test systemsISO/TC 213Dimensional and geometrical productISO/TC 213 home13534 specifications and verificationISO/TC 214Elevating work platforms ISO/TC 214 home80 ISO/TC 215Health informatics ISO/TC 215 home15150 ISO/TC 216Footwear ISO/TC 216 home7327 ISO/TC 217Cosmetics ISO/TC 217 home247 ISO/TC 218Timber ISO/TC 218 home5712 ISO/TC 219Floor coverings ISO/TC 219 home7813 ISO/TC 220Cryogenic vessels ISO/TC 220 home2010ISO/TC 222Personal financial planning - STANDBY ISO/TC 222 home10 ISO/TC 224Service activities relating to drinking waterISO/TC 224 home410 supply systems and wastewater systems -Quality criteria of the service andperformance indicatorsISO/TC 225Market, opinion and social research ISO/TC 225 home22ISO/TC 226 home1188 ISO/TC 226Materials for the production of primaryaluminiumISO/TC 227Springs ISO/TC 227 home63 ISO/TC 228Tourism and related services ISO/TC 228 home228 ISO/TC 229Nanotechnologies ISO/TC 229 home4637 ISO/TC 232Learning services outside formal education ISO/TC 232 home22 ISO/TC 234Fisheries and aquaculture ISO/TC 234 home91 ISO/TC 238Solid biofuels ISO/TC 238 home2318 ISO/TC 241Road traffic safety management systems ISO/TC 241 home10 ISO/TC 242Energy Management ISO/TC 242 home62ISO/TC 244Industrial furnaces and associated processingISO/TC 244 home84 equipmentISO/PC 245Cross-border trade of second-hand goods ISO/PC 245 home11 ISO/PC 248Sustainability criteria for bioenergy ISO/PC 248 home10 ISO/TC 249Traditional chinese medicine ISO/TC 249 home530 ISO/TC 251Asset management ISO/TC 251 home31 ISO/PC 252Natural gas fuelling stations for vehicles ISO/PC 252 home02ISO/TC 254 home40 ISO/TC 254Safety of amusement rides and amusementdevicesISO/TC 255Biogas ISO/TC 255 home01 ISO/TC 256Pigments, dyestuffs and extenders ISO/TC 256 home972 ISO/TC 257Evaluation of energy savings ISO/TC 257 home18ISO/TC 258 home25 ISO/TC 258Project, programme and portfoliomanagementISO/TC 260Human resource management ISO/TC 260 home012 ISO/TC 261Additive manufacturing ISO/TC 261 home55 ISO/TC 262Risk management ISO/TC 262 home45 ISO/TC 263Coalbed methane (CBM)ISO/TC 263 home20ISO/TC 265 home013 ISO/TC 265Carbon dioxide capture, transportation, andgeological storageISO/TC 266Biomimetics ISO/TC 266 home21 ISO/TC 267Facilities management ISO/TC 267 home03 ISO/TC 268Sustainable development in communities ISO/TC 268 home37 ISO/TC 269Railway applications ISO/TC 269 home04 ISO/TC 270Plastics and rubber machines ISO/TC 270 home01 ISO/TC 272Forensic sciences ISO/TC 272 home01 ISO/PC 273Customer contact centres ISO/PC 273 home02 ISO/TC 274Light and lighting ISO/TC 274 home163ISO/TC 275 home04 ISO/TC 275Sludge recovery, recycling, treatment anddisposalISO/TC 276Biotechnology ISO/TC 276 home02 ISO/PC 277Sustainable procurement ISO/PC 277 home01 ISO/PC 278Anti-bribery management systems ISO/PC 278 home01 ISO/TC 279Innovation management ISO/TC 279 home03 ISO/PC 280Management Consultancy ISO/PC 280 home01ISO/TC 282Water re-use ISO/TC 282 home39ISO/PC 283 home01 ISO/PC 283Occupational health and safety managementsystemsISO/TC 285Clean cookstoves and clean cooking solutions ISO/TC 285 home05 ISO/PC 286Collaborative business relationshipISO/PC 286 home01 management -- FrameworkISO/PC 287 home01 ISO/PC 287Chain of custody of wood and wood-basedproductsISO/PC 288Educational organizations managementISO/PC 288 home01 systems - Requirements with guidance for useISO/TC 289Brand evaluation ISO/TC 289 home11 ISO/TC 290Online reputation ISO/TC 290 home01 ISO/TC 291Domestic gas cooking appliances ISO/TC 291 home00 ISO/TC 292Security and resilience ISO/TC 292 home2410 ISO/TC 293Feed machinery ISO/TC 293 home00 ISO/PC 294Guidance on unit pricing ISO/PC 294 home01 ISO/PC 295Audit data collection ISO/PC 295 home00ISO/TC 297 home00 ISO/TC 297Waste management, recycling and roadoperation serviceISO/TC 298Rare earth ISO/TC 298 home00 ISO/TC 299Robots and robotic devices (officially startingISO/TC 299 home00 on the 2016-01-01)ISO/TC 300Solid recovered fuels ISO/TC 300 home00。