主要原辅材料消耗情况表

合集下载

422主要原辅材料

422主要原辅材料

4.2.2主要原辅材料主要原辅材料详见表4.2-2。

表4.2-2本项目主要原辅材料序号原、辅料名称原材料年用量仓储位置仓储量1水泥9万吨搅拌楼处、水泥罐4个共840t 2磨细砂4万吨搅拌楼处、细砂罐2个共240t 3砂21万吨露天堆场500t 4石40万吨露天堆场1000t 5钢材7.5万吨生产车间内30t6减水剂950吨生产车间内20t7脱模剂150吨生产车间内20t脱模剂:混凝土浇注前涂抹在施工用模板上的一种物质,以使浇注后模板不致粘在混凝土表面上、不易拆模,或影响混凝土表面的光洁度。

其主要作用为在模板与混凝土表面形成一层膜将两者隔离开故又称隔离剂。

主要成分为无机粉末:滑石、云母、陶土、白粘土等。

减水剂:减水剂是一种在维持混凝土坍落度不变的条件下,能减少拌合用水量的混凝土外加剂。

属于阴离子表面活性剂,有木质素磺酸盐、萘磺酸盐甲醛聚合物等。

加入混凝土拌合物后对水泥颗粒有分散作用,能改善其工作性,减少单位用水量,改善混凝土拌合物的流动性,或减少单位水泥用量,节约水泥。

4.2.3主要生产设备本项目主要生产设备见表4.2-3。

表4.2-3项目主要生产设备一览表序号设备名称容量数量产地1搅拌机 2.5立方2珠海2起重机QE20.5、24.5、28.518浙江3离心机8组6江苏4蒸压釜Ø3.2*36.53江苏5装载机1山东6钢筋切断机2江苏7拔丝机1江苏8预应力张拉机2江苏9水泥罐210t410磨细砂罐210t24.2.4主要工艺流程本项目生产工艺流程见图4.2-3、图4.2-4。

图4.2-3管桩生产线工艺流程**以上环节均产生噪声,故不在工艺流程图上一一标注。

图4.2-4方桩生产线工艺流程**以上环节均产生噪声,故不在工艺流程图上一一标注。

方桩与管桩的工艺不同在于取消了离心及蒸压养护环节。

工艺说明:①物料输送、计量:砂子、碎石经皮带输送至搅拌楼料仓区经计量送入搅拌机;水泥*、磨细砂*分别由水泥罐、磨细砂罐从密闭管道、密闭电子计量称量后直接送入搅拌机内;减水剂、水分别由各自的水箱经计量泵入搅拌机内。

合同耗用材料统计表模板

合同耗用材料统计表模板

合同耗用材料统计表模板英文回答:Contract Material Consumption Report Template.Introduction:The Contract Material Consumption Report Template is a useful tool for tracking and analyzing the usage of materials in a contract. It provides a comprehensive overview of the materials consumed, their quantities, and associated costs. This template is designed to assist in monitoring material usage, identifying any discrepancies, and ensuring efficient resource allocation.Components of the Template:1. Contract Details: This section includes information about the contract, such as the project name, contract number, and duration. It helps to establish a context forthe material consumption analysis.2. Material List: This section lists all the materials used in the contract. Each material entry includes details such as the material name, description, unit of measure, and unit cost. This information is crucial for accurately calculating the total cost of each material used.3. Consumption Data: This section captures the consumption data for each material. It includes columns for recording the quantity used, the date of consumption, and the associated cost. This data can be entered on a regular basis to keep track of the ongoing material usage.4. Summary and Analysis: This section provides a summary of the material consumption data. It includes the total quantity consumed, the total cost incurred, and any variations from the estimated consumption. This analysis helps in identifying any over or underutilization of materials and enables better decision-making for future contracts.Benefits of Using the Template:1. Cost Control: By tracking material consumption and associated costs, the template helps in controlling expenses and avoiding budget overruns. It enables theproject manager to identify any excessive material usageand take corrective measures.2. Resource Optimization: The template allows for the analysis of material consumption patterns, therebyfacilitating better resource allocation. By identifying trends and patterns, the project team can optimize the procurement and utilization of materials, leading to improved efficiency.3. Transparency and Accountability: The template promotes transparency and accountability by providing aclear record of material consumption. It helps in ensuring that the materials are used as per the contractrequirements and that any deviations are promptly addressed.4. Decision-Making Support: The template providesvaluable insights into material consumption, enabling informed decision-making. The analysis of consumption patterns can guide future procurement strategies and helpin negotiating better contracts with suppliers.Example:Let's consider a construction project where the contract involves the installation of electrical wiring. The Contract Material Consumption Report Template can be used to track the usage of electrical wires, connectors, and other related materials.In the Material List section, the template would include entries for different types of wires, connectors, and other associated materials. The consumption data section would capture the quantity of each material used, the dates of consumption, and the associated costs.Using the template, the project manager can monitor the material consumption on a regular basis. They can identify any discrepancies, such as excessive usage of wires orunexpected costs due to changes in specifications. This information can then be used to take corrective actions, such as revising the procurement strategy or adjusting the project timeline.中文回答:合同耗用材料统计表模板。

原辅材料表

原辅材料表
热传导油
绝缘
车间
380L

400L
易燃
一般危险源
超纯碳氢清洗剂
绝缘
车间
1400L
绝缘前处理
400L
清洗剂外泄会污染环境
一般危险源
液压油
机构 车间
1000L
机构现场
200L
易燃
一般危险源
2100kg
绝缘浇筑室、打磨工段
450kg
易燃易爆
存在重大危险源
GBL
绝缘
车间
9200kg
绝缘浇筑室
1600kg
清洗剂外泄会污染环境
一般危险源
盐酸
绝缘
车间
24kg
绝缘磷酸处理室
24kg
强酸
一般危险源
硝酸
绝缘
车间
60kg
绝缘磷酸处理室
60kg
强酸
一般危险源
真空泵油
绝缘
车间
170L

340kg
易燃
一般危险源
树脂
铸造
车间
2961kg
铸造造型现场2000kg与固Fra bibliotek剂大量混合易爆
存在重大危险源
酒精
铸造
车间
1171kg
铸造涂型现场
510kg
易燃
一般危险源
液化气
铸造
车间
811kg
铸造浇筑现场
500kg
易燃易爆
存在重大危险源
涂料
铸造
车间
1488kg
铸造涂型现场
2000kg
与酒精混合后使用易燃
一般危险源
丙酮
绝缘
车间
原辅材料消耗及最大贮存量统计表

水性涂料生产线设备设施和工艺流程

水性涂料生产线设备设施和工艺流程
FH-B1000
1
国产
9
叉车
3吨
1
国产
合计
14
(二)主要原材料
本项目主要原辅材料消耗情况见表6。
表6主要原辅材料消耗情况一览表
序号
名称
年用数量t
备注
1
母料(丙烯酸乳液)
9050
乳液
2
增稠剂
15
液体
3
分散剂
10
液体
4
消泡剂
10
液体
5
硅石灰粉
260
粉状
7
羟工基纤维素
80
粉状
8
膨润土
260
粉状
9
钛白粉
400
整个过程在常温常压下进行,仅为单纯的混合、分装,不涉及化学反应。
外墙涂料工艺流程图
图3丙烯酸防水材料工艺流程图及及产污环节
生产工艺简述:将原材料按照一定比例投入高速搅拌机搅拌30分钟后,搅拌均匀的原材料进入砂磨机研磨,以降低物料的细度,研磨完成的原料稳定一段时间后加入乳液、增稠剂等进行调和,调好的物料进行过滤,滤渣投入砂磨机进一步研磨,过滤完成的成品进行灌装存放。
粉尘捕集器
SS-1002型
1
5
高速搅拌罐
50-1285型
1
6
分装机
GFC-50D
2
7
叉车
3吨
1
合计
10
外墙涂料设备
1
搅拌机
8750-20
2
进口
2
砂磨机
KD-20B
2
进口
3
砂磨机
WMS-30
1
国产
4
移动空压机

合同耗用材料统计表模板

合同耗用材料统计表模板

合同耗用材料统计表模板英文回答:Contract Material Consumption Report Template.Introduction:The Contract Material Consumption Report is a document used to track and record the consumption of materials in a contract. It provides a comprehensive overview of the materials used, quantities consumed, and associated costs. This report is essential for monitoring the progress of a contract and ensuring that materials are being used efficiently.Content:The template for a Contract Material Consumption Report typically includes the following sections:1. Contract Details: This section includes information about the contract, such as the contract number, project name, and contract period. It provides a brief overview of the contract's scope and objectives.2. Material Details: This section lists all the materials that are being used in the contract. It includes the material name, code, unit of measurement, and cost per unit. Additionally, it may include information about the supplier or vendor from whom the materials are being procured.3. Consumption Details: This section records the quantity of materials consumed during a specific period. It includes the date of consumption, quantity consumed, and the corresponding cost. This information helps in tracking the material usage and identifying any discrepancies or inefficiencies.4. Cost Analysis: This section provides a summary of the total cost incurred for each material. It includes the total quantity consumed, unit cost, and the total cost.This analysis helps in evaluating the overall expenditureon materials and identifying opportunities for cost savings.5. Remarks: This section allows for any additional comments or observations related to the material consumption. It can be used to highlight any issues or challenges faced during the contract period or suggest improvements for future contracts.Example:To illustrate the usage of the Contract Material Consumption Report, let's consider a construction project. The contract involves building a commercial complex, and various materials such as cement, steel, bricks, and electrical fittings are required.In the Material Details section, the report will list these materials along with their respective codes, units of measurement (e.g., bags, tons, pieces, etc.), and costs per unit. For instance, cement may be listed as Material Code: CMT001, Unit: Bags, and Cost per Bag: $10.In the Consumption Details section, the report will record the quantity of each material consumed during a specific period. For example, if 100 bags of cement were used on a particular day, the report will include the date, quantity consumed (100 bags), and the corresponding cost ($1000).The Cost Analysis section will summarize the total cost incurred for each material. It will calculate the total quantity consumed (e.g., 500 bags of cement), multiply itby the unit cost ($10 per bag), and provide the total cost ($5000). This analysis will help in evaluating the overall expenditure on materials and identifying any cost variances.The Remarks section can be used to note any issues or observations related to material consumption. For instance, if there were delays in material delivery or if there were instances of material wastage, it can be mentioned here.中文回答:合同耗用材料统计表模板。

合同耗用材料统计表模板

合同耗用材料统计表模板

合同耗用材料统计表模板英文回答:Contract Material Consumption Statistics Template.Introduction:A contract material consumption statistics table is a useful tool for tracking and managing the usage of materials in various contracts. It provides a comprehensive overview of the materials used, allowing for better planning, budgeting, and analysis. In this article, I will discuss the key components of a contract material consumption statistics template and provide examples to illustrate their importance.1. Contract Information:The template should include the contract details such as contract number, start and end dates, and the partiesinvolved. This information helps in identifying which contract the materials are associated with and provides a reference for future analysis.Example: Let's say I am working on a construction project and have multiple contracts with different suppliers. The template will have separate sections for each contract, clearly indicating the contract number,start and end dates, and the names of the suppliers.2. Material Details:The template should have a section to record thedetails of the materials used, including the material name, quantity, unit of measurement, and cost. This information helps in understanding the consumption patterns and cost implications of different materials.Example: If I am managing a manufacturing contract, the template will have columns to enter the names of the materials used, such as steel, plastic, or rubber. I can then record the quantity of each material used in thecorresponding column and calculate the total cost based on the unit cost provided.3. Consumption Analysis:The template should include a section for analyzing the material consumption. This can be done by calculating the total quantity and cost of materials used for each contract, as well as the average consumption per unit or time period.Example: Let's say I have a contract for supplyingoffice stationery. The template will calculate the total quantity and cost of materials used, such as pens, papers, and staplers. It will also provide the average consumption per employee per month, allowing me to identify any excessive or insufficient usage.4. Variance Analysis:The template should include a section for variance analysis, comparing the actual material consumption withthe planned or budgeted consumption. This helps inidentifying any deviations and taking appropriate actions to control costs or improve efficiency.Example: If I have a contract for providing IT equipment, the template will compare the actual quantity and cost of materials used with the planned quantities and costs. If there is a significant variance, it may indicate issues such as overstocking or underutilization of resources, prompting me to investigate and make necessary adjustments.中文回答:合同耗用材料统计表模板。

工业企业含挥发性有机物原辅材料使用信息

工业企业含挥发性有机物原辅材料使用信息

工业企业含挥发性有机物原辅材料使用信息单位负责人:统计负责人(审核人):填表人:报出日期:20年月日说明:1.本表由辖区内使用含挥发性有机物原辅材料的工业企业填报,其中涉及含挥发性有机物的原辅材料年使用总量在1吨以上的主要行业工业企业必填,主要行业见指标解释;2.尚未领取统一社会信用代码的填写原组织机构代码号;3.如需填报的含挥发性有机物的原辅材料超过2个,可自行复印表格填报,相同含挥发性有机物的原辅材料不同品牌分列填报;4.产生量、排放量保留3位小数。

工业企业其他废气治理与排放情况单位负责人:统计负责人(审核人):填表人:报出日期:20年月日说明:1.本表由辖区内有废气污染物产生与排放的工业企业填报;2.尚未领取统一社会信用代码的填写原组织机构代码号;3.普查对象若填报G103-1至G103-12中的一张或多张表后,仍有未包含的废气排放环节,须将未包含的废气情况填报在本表;或普查对象无G103-1至G103-12所涉及的排污环节、但有废气排放的,须填报本表;4.指标02、04、06、08、10、12的计量单位按照附录(四)工业行业污染核算用主要产品、原料、生产工艺分类目录填报;5.厂内移动源仅填报厂内自用,未在交管部门登记的机动车和机械;6.产生量、排放量保留3位小数。

指标解释《工业企业含挥发性有机物原辅材料使用信息》(G103-11表)以下表1内行业本报表必填。

表 1 填报含挥发性有机物原辅材料使用信息普查表的行业料的类别。

按照1.涂料,2.油墨,3.胶黏剂,4.稀释剂,5.清洗剂,6.溶剂,7.其他有机溶剂(包括涂布液、润版液、洗车水、助焊剂、除油剂等,请注明),分类填报类别名称。

含挥发性有机物的原辅材料名称及代码指普查对象使用的含有挥发性有机物的原辅材料的名称。

溶剂、清洗剂、稀释剂只需参考下表名称(包括但不限于),无需在普查表中明确具体名称。

可参照表2选择填报,如无可对应名称,则填入“其他”。

生产前原辅材料及工模具准备清单

生产前原辅材料及工模具准备清单
生产前工模具准备
序号
名称
单位
数量
备注
大链条

4
ф25X6米
小链条

4
ф15X3米
平口铁锹

40
钢钎

8
ф30X1800
刮刀

10
电筒

10
上电池,头部三个小灯泡的那种(冷光)
黄砂

8
尾子砂

5

10
纸壳
kg
500
白油漆

5
排笔

30
粉笔

20
引流砂

5
耐火泥

5
油漆刷

20
引流管

5
ф3英寸
榔头

2
16磅
扳手

3
12英寸
平口夹钳

4
试样方盒

10
吹吸风管

3
自制
取样器

2000
脱氧及不脱氧各1000支
试样瓢

20
样盒

50
电钻

2
炼钢护目镜

50
铁撮箕

8
钢丝绳

6
5米、10米各4根,ф16及ф22
试样夹

5
扒杆
t
3
ф22X5米
测温仪

3
测温管

10
测温偶头

5000
补偿导线
生产用原辅助材料表
(暂按月产1万吨钢所需材料)
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

附:1
灌云县临港产业区企业情况统计表
企业名称:连云港宝诚化工有限公司;
主要原辅材料消耗情况表
说明:1:主要原辅材料消耗情况:指企业环评审批项目(包括未生产的产品)逐一填写;
2:水t/a:指新鲜用水总量;汽kwh/h:指项目所用的蒸汽总量;电t/a:指项目所用的用电总量;
3:项目总投资:指企业的投资额;
4:上述表格为一个产品的主要原辅材料消耗情况。

附:2
灌云县临港产业区企业情况统计表企业名称:连云港宝诚化工有限公司;
“三废”治理及排放情况一览表
说明:1:格不够,可以加;
2:其他特征污染物:环评批复后有;
3:危险废物:列出项目所产生的所有危险废物名称、总量等情况;
4:附2为企业“三废”治理及排放情况汇总表。

5:填好后,电子版发给我。

邮箱:*****************或发 QQ离线文件。

相关文档
最新文档