布莱迪温度计
布莱迪电接点压力表说明书六根线
布莱迪电接点压力表说明书六根线摘要：1.布莱迪电接点压力表概述2.六根线的作用与连接方式3.使用与维护注意事项4.结论正文：一、布莱迪电接点压力表概述布莱迪电接点压力表是一款高精度的压力测量仪器，广泛应用于各种工业领域，如石油、化工、冶金等。
它能够准确、稳定地测量流体介质的压力，并通过电接点进行信号传输，便于实现自动化控制和监测。
二、六根线的作用与连接方式布莱迪电接点压力表的六根线分别承担着不同的功能，具体如下：1.电源线（一般为红色）：连接压力表与电源设备，为压力表提供工作电压。
2.零线（一般为蓝色）：连接压力表与电源设备的零线，保证电路回路的完整性。
3.输出线（一般为黄色）：连接压力表与控制设备，输出压力信号，实现自动化控制。
4.接地线（一般为绿色）：连接压力表与设备接地，保证设备安全及信号传输的稳定性。
5.传感器连接线（一般为棕色）：连接压力表与传感器，实现压力信号的传输。
6.补偿线（一般为黑色）：连接压力表与补偿装置，用于消除环境温度对压力表显示的影响。
在连接六根线时，需要注意以下几点：1.接线顺序应与压力表上的标识相对应，避免接错线。
2.接线时应使用足够截面积的导线，以保证信号传输的稳定性。
3.接线紧固，避免线头松动造成接触不良。
三、使用与维护注意事项1.在使用过程中，应避免压力表受到剧烈震动或高温影响，保证其正常工作。
2.定期对压力表进行校准，确保测量精度。
3.保持压力表及接线部位的清洁，防止污物进入影响测量。
4.在拆卸或更换零部件时，需停电操作，并遵循相关安全规定。
四、结论布莱迪电接点压力表是一款重要的工业测量设备，其六根线的正确连接和使用对于保证设备运行的安全性和测量精度至关重要。
布莱迪压力表选型手册
多种类型小外径压力表系列More kinds small diameter pressure gauge 索引页Index: PA.06.1索引页Index: PA.06.2索引页Index: PA.06.3索引页Index: PA.06.5索引页Index: PA.06.6索引页Index: PA.06.7索引页Index: PA.06.8索引页Index: PA.06.9索引页Index: PA.06.10索引页Index: PA.06.11索引页Index: PA.06.12索引页Index: PA.06.13索引页Index: PA.06.14索引页Index: PA.06.15钢内机塑料玻璃罩压紧式压力表YTF-040. ZO. 505Stainless Steel Internals Plastic Window Glass Pushed in Pressure Gauge 几何尺寸 DIMENSIONS 单位Unit (mm)40轴向卡子安装一般压力表Y-040.ZK.204 40 Back clamp mounting General Service Pressure Gauge单位Unit (mm)43/53轴向安装充油耐震压力表YTN-043/053 43/53 Back mounting, Liquid filling & Vibration-proof pressure gauge YTFN-043/053产品特性：●径向结构、轴向、轴向卡子安装结构可选●不锈钢旋紧式罩壳设计●304钢外壳铜内机、钢内机可选●充液耐震，密闭干式可选● 2.5%精度等级●测量范围：铜内机：0.1MPa～25MPa钢内机：0.16MPa～25MPa●平板卡子安装可选CHARACTERISTICS●Bottom mounting, Back monting, Back clamp mounting available ●Stainless Steel, screw type●304 Stainless Steel case, brass internals or StainlessSteel internals available●Liquid filling, Vibration-proof,Obturation and dry type available●Accuracy 2.5%●RangeBrass internals: 0.1MPa～25MPaStainless Steel internals: 0.16MPa～25MPa●Plain board clamp mounting availableBack clamp mounting：几何尺寸 DIMENSIONS 单位Unit (mm)43/53轴向安装充油耐震压力表单位Unit ：mm 径向 Bottom mounting 轴向 Back mounting 轴向卡子 Back clamp mounting51罩壳压紧式普通压力表Y-050.20551 Push in type General Service Pressure Gauge 几何尺寸 DIMENSIONS 单位Unit (mm)仪表型号标示 Type code ：Y-050. ZO. 205 (Y-50 A18 )41/51充油耐震压力表YTN-041/051 41/51 Liquid filling, Vibration-proof pressure gauge YTFN-041/051几何尺寸 DIMENSIONS单位Unit：mm：Back mounting：耐热型产品特性：●径向或轴向接头两件式结构●旋压密封罩壳设计●304本色钢外壳铜内机、钢内机可选●充液耐震，密闭干式可选● 2.5%精度等级●测量范围：铜内机：0.1MPa～25MPa钢内机：0.16MPa～25MPaCHARACTERISTICS●Bottom mounting or Back mounting, two-piece type●Roll formed●304 original color case, brass and Stainless Steel case available●Liquid filling, Vibration-proof, Obturation and dry type available●Accuracy2.5%●RangeBrass internals: 0.1MPa～25MPaStainless Steel internals: 0.16MPa～25MPa40、50铁壳旋压密封式压力表Y-040.20340, 50 Iron case roll formed pressure gauge Y-050.203轴向安装、轴向卡子安装结构几何尺寸 DIMENSIONS 仪表型号标示Y-040. ZK. 203 (Y49-AZK)Y-050. ZK. 203 (Y512-AZK)单位Unit ：mm几何尺寸 DIMENSIONS 单位Unit (mm)G36\G46\44轴向有机玻璃罩壳旋紧式压力表G36/G46/G44 Back mounting, Screw type pressure gauge Stainless Steel internals Y-036. ZO. 204 (G36Z )Y-046. ZO. 204 (G46 Z)日本)304 original color, polishing case 50径向螺钉上紧式压力表Y-050. 20050 Bottom mounting, fixed with screw pressure gauge YTF-050. 200Y-050. AO. 200 (Y-50DK )Y-050. ZO. 200 (Y-50ZDK)φ50钢内机 Stainless Steel internals 仪表型号标示径向：YTF-050. AO. 200 (Y-50 AeroB- )轴向：YTF-050. ZO. 200 (Y-50Z AeroB- )几何尺寸 DIMENSIONS 单位Unit (mm)几何尺寸 DIMENSIONS 单位Unit (mm)40螺钉上紧式罩壳压力表Y-040.20040 Fixed with screw pressure gauge塑壳锅炉压力表YTY-40Plastic Case Boiler Pressure Gauge 几何尺寸 DIMENSIONS 单位Unit (mm)YTY-040. 00. 105(YTY-40Z 庆东)几何尺寸 DIMENSIONS 单位Unit (mm)Ф30轴向旋压密封式小不锈钢压力表YTF-030.ZO. 533Ф30 Back mounting Roll formed Stainless Steel Small Pressure Gauge几何尺寸 DIMENSIONS 单位Unit (mm)40小外径不锈钢密闭型压力表YTFS-040 40 Small Stainless Steel Obturation type Pressure Gauge各种类型小外径压力表各种类型小外径压力表如何选型 HOW TO ORDER－。
杰瑞(JAEGER) iSeries温度计用户指南选择说明书
I3200-DCi8/iS8 - 1/8 DIN Meteri8C/iS8C - 1/8 DIN Ultra Compact Case i8DV/iS8DV - 1/8 DIN Dual Display Vertical i8DH/iS8DH - 1/8 DIN Dual Display Horizontal i16/iS16 - 1/16 DIN Single & Dual Display i32/iS32 - 1/32 DIN MeterRD4/RD6 - 1/8 DIN Remote Display/Programmer iLD - Big Display1/32 DINi Series Selection Guide PDFFor Temp.UnitsHigh QualityiSERIES MANUALS/CONFIGURATION SOFTWARE•MANUALS i32/iS32 Monitor, Controller & Quickstarts• MANUALS iSeries Communication Manual • SOFTWARE CONFIGURATION• SOFTWARE ADVANCED CONFIGURATION • SOFTWARE ACTIVE X COMPONENT FOR EXCEL• SOFTWARE OPC Server• SPECS i32 - COMMON SPECS - PDF • PRICE• MECHANICAL SPECS & CAD FILES - Temperature/Process • MECHANICAL SPECS & CAD FILES - StrainREQUIRES ADOBE ACROBAT - HELP5-year WarrantyHigh Accuracy ±0.5°C (0.9°F), 0.03% ReadingFull Autotune PID ControlUser Friendly, Simple to Configure Free Software, Active X ControlsUniversal Inputs: Thermocouple, RTD, Process Voltage/Current, Strain2 Control or Alarm Outputs (Optional) - dc Pulse- Solid State Relays (SSR's) - Mechanical Relays- Analog Voltage and CurrentFirst 1/32 DIN Instrument with Totally Programmable Color Displays (Standard)First 1/32 DIN Instrument Offering Both RS-232 and RS-485 Serial Communications in One Instrument (Optional)First 1/32 DIN Instrument with Analog Output Selectable as a Control Output or as Retransmission of Process VariableFirst 1/32 DIN Instrument with Built-in Excitation, 24 Vdc, Standard ±0.04°C/°C RTD and ±0.05°C /°C TC @ 25°C (77°F) NEMA-4, IP65 Front BezelFront Removable and Plug ConnectorsThe NEWPORT ® i32 is the i Series meter (i3200) and controller (i32) in the extremely compact and increasingly popular 1/32 DIN size. The i32 is the most sophisticated and accurate instrument available in the small 1/32 DINpackage, yet is still easy to configure.The i32 introduces a number of unique features not yet found on any other 1/32 DIN instrument. The i32 is the first 1/3 DIN controller with a totally programmable display that can change color at any set point or alarm point. The unique 9-segment LED characters greatly improves alphanumeric representations.The i32 handles more thermocouple, RTD, process voltage and current inputs than any other 1/32 DIN controller.The i32is the first 1/32 DIN controller with built-in excitation for transmitters or other devices, 24 Vdc @ 25mA.The i32 is the first 1/32 DIN controller offering 2 SPDT (Single Pole Double Throw) Form C relays, instead of the single throw relays on typical 1/32 DIN controllers. The i32 is the first to offer both RS-232 and RS-422/485 serial communications in one instrument (-C24 option). Both ASCII protocol and modbus protocol are selectable from the menu.The "iServer" is a DIN rail mounted device which can be a hub connecting up to 32instruments to the Ethernet and Internet. The “i Server” is both a Web Server and anEthernet-Serial bridge. To connect to the i Server, iSeries devices must feature the "-C24" Serial Communications option.i Series FAMILYThe NEWPORT®i Series is a family of microprocessor-based instruments offered inthree DIN sizes with NEMA-4, IP65 rated front bezels. All of the instruments share thesame set-up and configuration menu and method of operation, a tremendous timesaver for integration of a large system.The i Series displays feature unique 9-segment LED characters which greatlyimproves alphanumeric representations. The 7-segment LED characters found onmost instruments are adequate for presenting numbers, but not letters. Words are easier to read with the unique 9-segment LED characters on the i Series, which makes operating and programming simpler and easier.Programmable Color DisplayThe NEWPORT®i Series are the first complete series of 1/8, 1/16 and 1/32 DIN process control instruments with totally programmable color displays. The display can be programmed to change color at any set point or alarm point.i Series Change Color at any SetpointFor example, the instrument can be programmed to display the process value in GREEN during warm-up, switchingto AMBER to signal the normal operating range, and in RED to signal an alarm condition. The changes in color are quickly seen from a distance, and machine operators can intuitively react to changing conditions. The colors can be programmed to change back when the value drops back below the alarm point or to "latch" on until being reset by the operator.The instrument can also be programmed to display only one unchanging color: GREEN ,AMBER , or RED . This is a useful way to let an operator identify, at a glance, process values in three separate locations, or to display three different measurements such as Temperature, Pressure, and Flow.The innovative NEWPORT ® i Series of meters/controllers features an extended Five (5) YEAR warranty at no extra charge. The i Series packs a wealth of power and features into the smallest of packages, utilizing COB (chip-on-board)and SMT (surface mount technology) assembly techniques and automation. Every i Series instrument is thoroughly calibrated and tested at several stages throughout production. The i Series offers the highest accuracy for industrial instrumentation at 0.03% of reading. The analog-to-digital conversion utilizes proprietary 20-bit ASIC (application specific integrated circuit) patented algorithms and smart filtering.Universal InputsThe innovative i Series offers the broadest selection of signal inputs available on one industrial instrument. The choices are easily selected from the Menu with four front panel pushbuttons, or by serial communications.The Universal Temperature & Process instrument (model "i ") handles ten common types of thermocouples: K , J , T , E , R , S , B , C , N , and J DIN , multiple RTD's , and several Process (dc) Voltage ranges : 0-100 millivolt, 0-1 Volt, 0-10 Volt; Process Current range: 0-20 mA. Thismodel also features built-in excitation ,*****************'swidechoiceofsignalinputs,this model is an excellent choice for measuring or controlling temperature with a thermocouple,RTD, or 4-20mA transmitter.The Strain & Process instrument (model "iS ") measures inputs from Load Cells, Pressure Transducers, and most any strain gauge sensor as well as several Process (dc) Voltage ranges : 0 to 100 mVdc, -100 mVdc to 1Vdc and 0 to 10 Vdc; Process Current range: 0-20 mA. The "iS" has built-in excitation of 5 Vdc @ 40mA or 10 Vdc @ 60mA for bridge transducers. This "iS" model supports 4 and 6 wire bridge configurations, ratiometric and non-ratiometricmeasurements. The "iS" features fast and easy "in-process" calibration/scaling of the signal inputs to any engineering units. This model also features 10 Point Linearization which allows the user to linearize the signal input from extremely nonlinear transducers of all kinds.The MIL Standard Nickel RTD with MIL-T-7990B curve is available as a Factory Setup.Ordering Example: iS3233-C24-FS (FS : preset for MIL-T-7990B curve, please specify range and accuracy).Analog OutputThe optional analog output can be programmed within a range of 0-10 Vdc or 0-20 mA. It is selectable as either a control output or as a calibrated retransmission of the process value-a unique feature among controllers.Built-in Excitation StandardAny excitation voltage between 5 and 24 Vdc is available by special order. Built-in excitation is not available with optional -C24 isolated RS-232/ RS-485 serial communications or -DC option.Control FunctionsThe i Series can control simple manual operation to ON-OFF and full Autotune PID control. (Selectable preset tune, adaptive tune, PID, PI, PD control modes.) The dual control outputs can be configured for a variety of independent control and alarm applications such as heat/heat, heat/cool, heat/alarm, cool/cool, cool/alarm or alarm/alarm. The rampto-setpoint feature allows the user to define the rate of rise to setpoint, minimizing thermal shock to the load duringstart-up. Maximum ramp time: 99.59 (HH.MM), Soak: 00.00 to 99.59 (HH.MM), Damping: 1 to 8 in unit steps.For applications that do not require PID control, i Series controllers are available in two special models that offer simplified programming. The i Series“Limit Alarm” model (specify–AL option) is a conventional limit alarm.The i Series “Simplified Menu” model (specify–SM option) offers simplified programming. The menu flowchart is simila to programmable digital panel meters that are used for on/off control or alarms. (Please see the i Series operator’s manuals for programming details.)Free SoftwareFree software is provided for easy set-up, configuration and data acquisition with the NEWPORT®i Series.Free ActiveX Controls are provided for the i Series, making it easy to integratethe i Series with information systems using "ActiveX Containers" such as MicrosoftVisual Basic and Microsoft Excel as well as with popular OLE and OPC compliantdata acquisition, process control, and industrial automation software fromNEWPORT®, GE Fanuc, Intellution, Rockwell Automation, iconics, and Wonderwareamong others.Optional Isolated RS-232 and RS-485 Serial CommunicationsThe i Series are the first i ntelligent i ndustrial i nstruments to offer both RS-232 and RS-485 serial communications in one instrument which can be selected from the menu. The i Series features both the i Series serial protocol and MODBUS serial protocol.Factory Setup and ConfigurationMake installing your i Series meter or controller easier by ordering it preconfigured by the factory. You specify the input types, scaling if applicable, set points, alarm points, etc. and we will program the instruments to your specific requirements in our calibration lab prior to shipment. For a checklist of factory setup parameters, please consultyour NEWPORT® applications engineers.Custom ConfigurationsCustom color bezels and enclosures are available for Original Equipment Manufacturers. Enhance the appearance ofyour equipment design with custom colors. Consult the NEWPORT® OEM Group.Part Number Descriptioni32001/32 DIN Temperature/Process Monitor, No Output,Standard power input: (90 to 240 Vac/dc)i32221/32 DIN Temperature/Process Controller with 2 ControlOutputs (Two SSR : 0.5 A @ 120/240 Vac continuous),Standard power input: (90 to 240 Vac/dc)i3233-C241/32 DIN Temperature/Process Controller with 2 ControlOutputs (2 Relays: Form “C” SPDT 3 A @ 120 Vac, 3 A@ 240 Vac), Standard power input: (90 to 240 Vac/dc),Isolated RS-232 and RS-485/422 serial communicationoption.i3244-DC1/32 DIN Temp/Process Controller with 2 ControlOuptuts (two pulsed 10 Vdc @ 20 mA, for use withexternal SSR) Low Voltage Power Option: (12 to 36 Vdc,24 Vac)i32521/32 DIN Temp/Process Controller with 2 ControlOutputs (Analog Output selectable as either control orretransmission of process value; 0 to 10 Vdc or 0-20 mA@ 500 ohm max. and SSR)iS32001/32 DIN Strain/Process Monitor, No Output, Standardpower input: (90 to 240 Vac/dc)-FSFactory Setup and Configuration, $50 ChargeNote: 1) -DC or -C24 not available with excitation.2) Analog Output (Option 5) is not available with -AL units. 3) Strain iS32 is not available with -SM units.Part Number BuilderOption Descriptions (((I3200-DC。
Additel 878 参考干式温度计ibration仪说明书
Reference Dry Well CalibratorsAdditel 878OVERVIEWWe are taking temperature calibration to the next level with the Additel 878 Reference Dry Well Calibrators. If you are looking for the best dry well on the market, then look no further! Additel’s commitment to continuous improvement, quality and time saving features are on full display in the ADT878 series. With three models to choose from, ranging from -40 to 700°C, you will find the perfect fit for your calibration needs. The Process Calibrator option adds an external reference input, a two-channel readout for UUT’s and a full complement of capabilities to help with everything from measuring temperature sensors, to calibrating thermocouples, self-calibrating the Reference Well and configuring HART transmitters. Each unit comes standard with a large touchscreen display, dual-zone control and Additel’s commitment to the best customer service in the industry. We are certain that you will be blown away by the outstanding performance of these game-changing Reference Dry Wells!Three models ranging from -40℃ to 700℃Reference level performance in accuracy, stability and uniformity Quick to temperatureTwo-channel readout measures RTDs and TCs, and provides task documentation Full HART communicatorOptional external temperature control Wi-Fi and Bluetooth capable Color touch screen display Quick-Push connectors (PC Option)Set point control by reference Self-calibration featureOptional TPW kit for built-in automatic realization (ADT878-160 only)Built-in automatic annealing feature (ADT878-700 only )FEATURESNon-PC version PC version Process Calibrator OptionEach model can be purchased with our Process Calibrator (PC) option. This option combines the many features found in a fully functional HART documenting process calibrator with the reference grade dry well. This option includes the ability to measure a reference PRT, with virtually any connection type, and two device under test channels which can measure, mA, voltage, switch, RTD or thermocouple. In addition to these measurement functions, this calibrator has full documenting capability of creating tasks, saving as found and as left results, as well as communication with HART-smart transmitters. The process calibrator option also has an on board full HART communicator which allows users to read, configure and calibrate HART transmitters. The snap shot feature allows you to capture all information displayed on the screen with the push of a button. This optional add-on allows for data logging of all channels on an auto step function. By utilizing the reference PRT, you can select to control to the dry well set point using the internal sensor or the external reference PRT.We believe using an external reference probe as your standard is the best way to perform your temperature calibration. But we also recognize this method is not always necessary or convenient and depending on the application, using the internal control sensor would be preferred. Traditionally, the internal control sensor has a wide accuracy which can largely be contributed to its long-term drift. We’ve built-in a self-calibration feature allowing you to run an automated calibration of the internal control sensor using your external reference. With literally a few selections the calibration will run automatically giving you a fresh, traceable calibration of the control sensor which will improve its accuracy as you will not have to account for its long term drift when used as the reference.Self-CalibrationProcess CalibratorOptional Electronics Traditionally, dry wells were simply a stable heat source. To enhance the usability of our Reference Dry Wells, we've added automation features enabling you to utilize these amazing devices as a highly stable heat source, triple point of water maintenance apparatus, and annealing furnace.Combined with the ADT878-TPW-KIT, the ADT878-160 Reference Dry Well can be used to automatically realize and maintain a triple point of water cell. Traditional methods take time and practice to realize the triple point of water. Additel has now simplified this process with an automatic TPW realization feature. Simply insert the cell and PRT into the Reference Dry Well and run the procedure. The automation in the firmware will alert when the cell is super cooled. Remove the cell and give it a shake and now you can maintain the triple point in the reference well. This is very useful to check the drift of your PRT. For more information, please see our ADT878-TPW-KIT data sheet.When you purchase our 700°C Reference Dry Well, you will find our automatic annealing feature used to anneal PRTs. We have preconfigured annealing procedures that set the temperature annealing time and cool down rate. This feature, also lets you create your own annealing procedures.Automation FeaturesFEATURESSPECIFICATIONSReference Dry Well SpecificationsInput Specifications (Process Calibrator [PC] Option) ArrayTC Measurement Specification and Calculation[1] Excluding cold junction compensation errors.Plug, TC to TC, TC to Banana, Ordering InformationModel:ADT878ADT878PCModel NumberTemperature Range (at 23℃):160: -40°C to 160°C 425: 33°C to 425°C 700: 33°C to 700°CInsert Model:A, B, C, D,E, FPower Option:110 V 220 VAccessoriesSpecificationHigh TempHigh TempHigh Temp* Updated insert information at Low TempLow Temp Low TempLow TempLow TempInsert Ordering Information878Low TempHigh TempLow TempHigh TempHigh TempLow Temp[1] Handle temperature outside this range will cause damage to the probe.* PRT Information from AM17XX-12-ADTAM17XX-BEND-ADTSecondary PRT InformationAM1710Secondary PRT Ordering InformationADT12。
002就地指示仪（直读式压力计、温度计）调校记录
就地指示仪（直读式压力计）调校记录
编号：001
GNTC—YB—02
就地指示仪（直读式压力计）调校记录
编号：002
GNTC—YB—02
就地指示仪（直读式压力计）调校记录
编号：003
GNTC—YB—02
就地指示仪（直读式压力计）调校记录
编号：004
GNTC—YB—02
就地指示仪（直读式压力计）调校记录
编号：005
GNTC—YB—02
就地指示仪（直读式压力计）调校记录
编号：006
GNTC—YB—02
就地指示仪（直读式压力计）调校记录
编号：007
GNTC—YB—02
就地指示仪（直读式压力计）调校记录
编号：008
GNTC—YB—02
就地指示仪（直读式压力计）调校记录
编号：009
GNTC—YB—02
就地指示仪（直读式压力计）调校记录
编号：010
GNTC—YB—02
就地指示仪（直读式压力计）调校记录
编号：011
GNTC—YB—02
就地指示仪（直读式压力计）调校记录
编号：012
GNTC—YB—02
就地指示仪（直读式压力计）调校记录
编号：013
GNTC—YB—02
GNTC—YB—02。
北京布莱迪仪器仪表有限公司202010259488.5压力表及其机芯说明书
(19)中华人民共和国国家知识产权局(12)发明专利申请(10)申请公布号 (43)申请公布日 (21)申请号 202010259488.5(22)申请日 2020.04.03(71)申请人 北京布莱迪仪器仪表有限公司地址 100164 北京市朝阳区南三环成寿寺路甲135号，3号楼2层技术中心(72)发明人 宋谨铭 俞磊 高冀东 (74)专利代理机构 北京集佳知识产权代理有限公司 11227代理人 赵焕(51)Int.Cl.G01L 1/04(2006.01)G01L 7/02(2006.01)G01L 7/04(2006.01)(54)发明名称压力表及其机芯(57)摘要本发明公开了一种压力表及其机芯，压力表的机芯包括：支撑件和与所述支撑件转动连接的转轴；固定在所述转轴上的中心齿轮；设置在所述转轴上的第一游丝和第二游丝，所述第一游丝和第二游丝分别为左旋游丝和右旋游丝；与所述中心齿轮啮合的传动齿轮；通过铰接轴与所述支撑件铰接的摆杆，所述摆杆的第一端与所述传动齿轮固定，所述铰接轴距所述摆杆的第一端的距离大于零。
在转轴上设置了两个游丝，两个游丝分别为第一游丝和第二游丝，第一游丝的缠绕方向与第二游丝的缠绕方向相反。
如此设置，两个游丝产生反作用力矩，可以消除中心齿轮与传动齿轮两个方向的啮合间隙，使得仪表运转更加稳定。
权利要求书1页 说明书4页 附图2页CN 111323150 A 2020.06.23C N 111323150A1.一种压力表的机芯，其特征在于，包括：支撑件(1)和与所述支撑件(1)转动连接的转轴；固定在所述转轴上的中心齿轮(3)；设置在所述转轴上的第一游丝(2)和第二游丝(5)，所述第一游丝(2)和第二游丝(5)分别为左旋游丝和右旋游丝；与所述中心齿轮(3)啮合的传动齿轮；通过铰接轴与所述支撑件(1)铰接的摆杆(6)，所述摆杆(6)的第一端与所述传动齿轮固定，所述铰接轴距所述摆杆(6)的第一端的距离大于零。
Fluke 570 系列无人机红外温度计说明书
PRODUCTThe Fluke 570 series infrared thermometersMeasure temperature with Ease andPrecisionThe new Fluke 570 series are the most advancedIR thermometers, and are ideal for predictive andpreventative maintenance applications.The series consists of 3 models offering a broadtemperature range an5 3yue dimension laser t fo r p r e c i s e ta r g e t i n g r e s u l t i n g i n• Enhanced optics allows measurements ofsmaller objects from farther away• Coaxial three-dot laser sighting systemhighlights the true diameter of measurementspots at all distances• Adjustable emissivity setting and 30 pre-setcommon material values for more accurate measurements• 100 data point memory for storage of measurements (Fluke 574, 576) and photographic images (Fluke 576)• Instantly captures photographs of temperature measurement locations for improved documentation (Fluke 576 only)• Backlit Display, holds 7 seconds• Bar graph of last ten readings• Includes software to log, graph and analyze temperature data ArrayIncluded accessories• Thermocouple K probe (Fluke-574 and Fluke-576)• Power supply (Fluke-574)• Windows-based software on CD in 8 languages(English, Spanish, French, Italian, German,Portuguese,SimplifiedChinese) (Fluke-574 and Fluke576)• USB cable (Fluke-576) or RS232 cable (Fluke-574)• Durable hard case• 2 AA batteries• User’s manual on CD in 8 languages(English, Spanish, French, Italian, German, Portuguese, Japanese and Simplified Chinese) • Printed Quickstart in 8 languages(English, Spanish, French, Italian, German, Portuguese, Japanese and Simplified Chinese) WarrantyThe Fluke 570 series will come with 2 years warrantyOptional accessories:• AN5: Analog data cable• C570: Non-contact thermometer holsterProduct specifications:Temperature range -30 to 900°C Display Resolution 0.1°C of reading up to 900°CD:S (Distance to spot size) 60:1 Standard focus 50:1 Close focusMinimum measurement diameter 19mm Standard focus 6mm Close focusLaser sighting Three point coaxial laserEmissivity Adjustable digitally adjustable from 0.10 to 1.0 by 0.01Display Accuracy (Assumes ambient operating temperature of 23°C to 25°C)±0.75% of reading±1% of reading or ±0.75°C whichever is greaterResponse time 250 mSec (95% of reading) Repeatability ±0.5% of reading or ±1°C whichever is greater Spectral response 8 µm to 14 µmLaser Sighting Laser turns off above ambient temperature of 40°C Relative humidity 10% to 90% RH non-condensing, at <30°C Tripod mount ¼ in. 20 UNC threadingPower 2 AA batteries 2 AA batteries/ ACadapter2 AA batteries/ USBBattery life (alkaline) 13 hours with laserand backlight on50%13 hours with laserand backlight on50%8 hours (13 hours withphotographic mode off) 50 photoswith flash; 200 photos w/o flashDisplay hold 7 secondsLCD backlit YesOperating temperature0°C to 50°CStorage temperature-20°C to 50°CMAX, MIN temperatures YesDIF, AVG temperatures No YesAudible and visible alarms Lo w High and lowBar graph display YesUp to 100 points data logging No Data only Data plus photos Data graphing and storage software(Windows compatible)No Data only Data plus photos Weight 480 gr 580 gr Size 240 mm x 170 mm x 55 mm?。
布朗克温度
布朗克温度布朗克温度是一种温度单位，它是根据美国科学家威廉布朗克利普（William Bradford Shockley）的发现而命名的。
布朗克温度量表（BKT）比摄氏度（Celsius）更为精确，它是一种能够更准确地衡量温度的温度计量系统，它比摄氏温度要更加精确，因此在某些场合下得到了广泛的应用。
布朗克温度的主要应用是测量热量和温度，例如：在工业、冶金、烹饪、火药制造、冶炼、油库以及核反应堆等领域；还可以用来测量湿度、气压、海洋等环境参量。
此外，它也可以用在农业、气象、气候变化、工业生产和汽车等行业的温度控制中。
在测量布朗克温度时，一般都会使用特殊的设备，即布朗克温度计，它是一种特殊的温度表，其原理是通过测量某种特定的温度来获得温度的非线性渐变值，这个过程是通过一种特殊的热电材料来完成的。
这种特殊的热电材料在温度变化时，电阻值也会随之改变，电阻值变化大小与布朗克温度有关，而这个过程可以通过电路来连接热电材料，从而检测温度变化。
布朗克温度系统可以比摄氏温度更加精确，它可以测量温度的微小变化，这也是它比摄氏系统更受欢迎的原因。
布朗克温度系统的优势在于它可以测量出测量温度的最小变化，而摄氏系统只能测量温度的平均值。
因此，布朗克温度系统可以更准确的测量温度，这也是选择它的原因之一。
布朗克温度的应用非常的广泛，它既可以应用于工业、冶金、烹饪、火药制造、冶炼、油库以及核反应堆等领域，也可以用在农业、气象、气候变化、工业生产和汽车等行业的温度控制中，具有广泛的应用前景。
在使用布朗克温度时，需要注意它的精度和准确性，因为它可以测量出温度的最小变化，这些变化可能会对温度控制造成影响。
当然，布朗克温度也有其缺点，它的测量过程复杂，需要特殊设备来操作，而且成本较高，这也是它尚未受到更多人群认可的一个原因。
总之，布朗克温度是一种新型温度测量系统，它比摄氏系统更加精确，但同样也有其缺点。
在使用它时，需要注意精度和准确性，并且还要考虑它的购买成本。
布莱迪电接点压力表说明书六根线
布莱迪电接点压力表说明书六根线一、布莱迪电接点压力表简介布莱迪电接点压力表是一款性能稳定、精度高的压力测量仪器。
它采用先进的电接点技术，能实时监测压力变化并输出信号，广泛应用于各种工业领域，如石油、化工、冶金等。
本文将重点介绍六根线的接线方法及操作注意事项。
二、六根线的作用及接线方法1.电源线（红色）：连接电源，为仪表提供工作电压。
2.信号线（绿色）：输出压力信号，可连接PLC、显示器等设备。
3.公共地（黑色）：保证仪表内部电路安全，需与设备地线连接。
4.开关输出线（黄色）：用于控制设备启停，如阀门、泵等。
5.传感器电源线（蓝色）：为传感器提供电源，确保传感器正常工作。
6.传感器信号线（白色）：连接传感器，实时传输压力信号。
接线方法：1.先将电源线、公共地线、开关输出线连接到仪表背面相应接口。
2.将传感器电源线连接至传感器电源接口，另一端连接至仪表背面相应接口。
3.将传感器信号线连接至传感器信号输出接口，另一端连接至仪表背面相应接口。
4.最后将信号线（绿色）连接至显示器或其他设备。
三、操作与维护注意事项1.在接线前，请确保电源已关闭，以免发生触电事故。
2.接线时，请勿让线缆受力过大，以免损坏线缆或接头。
3.接线后，请检查各接口是否牢固，确保无松动现象。
4.操作时，请勿用力敲击或摔打仪表，以免损坏内部元件。
5.定期检查仪表外观和内部元件，如有损坏，及时更换。
四、常见问题及解决方法1.压力表显示不准确：检查传感器和连接管道是否清洁，如有污物，需清理；检查传感器是否损坏，如有损坏，需更换。
2.无法启动或停止设备：检查开关输出线是否接错或损坏，如有问题，需重新接线或更换。
3.电源不稳定：检查电源线是否接触良好，如有问题，需更换电源线。
五、总结与推荐布莱迪电接点压力表凭借其高精度、稳定性等特点，在工业领域得到广泛应用。
掌握六根线的接线方法及操作注意事项，能确保仪表正常工作，提高生产效率。
Omega BB703 230VAC 小型黑色温度计ibrator 产品说明书
262U Calibra desde ambiente +10 a 400 °CU Diseño miniatura portátilU Controlador digital detemperatura incorporado DIN 1⁄32U Calibra instrumentos infrarrojos de forma rápida y precisaU Se incluye un certificado de calibración rastreable con 3 puntos de datosU Incluye estuche portátil blandoU Comunicaciones RS232 opcionales con software de comunicaciones CN9-SW y cable gratuitosEjemplo de pedido: BB703-230VAC-C2, fuente de calibración de cuerpo negro de 230 Vca, con la opción RS232. OCW-2, OMEGACARE SM extiende la garantía estándar de 3 años a un total de 5 años.Especificaciones Rango de temperatura de la placa del objetivo:Ambiente +10 a 400 °C*Condiciones ambientales:Temperatura: 0 a 40 °CH umedad: HR del 0 al 90%, sincondensaciónPotencia: 230 Vca, 50/60 Hz, 175 WSensor de control interno: RTD de platino,clase a, 100Ω, alfa = 0,00385Precisión: ±1,4 °CResolución: 0,1 °Estabilidad: 0,3 °C El modelo BB703 es un calibrador de cuerpo negro miniatura, resistente y de alto rendimiento. Se utiliza para calibraciones de pirómetros infrarrojos con un rango de temperatura ambiente de +10 a 400 °C. Gracias a su diseño miniatura único y a su placa del objetivo integrada de 29 mm, el BB703 es un calibrador infrarrojo económico e idóneo para cualquier aplicación de laboratorio o de servicio en campo. La opción -C2 permite la configuración, ajuste y lectura remotos. Con estos modelos se incluye el software gratuito.BlACk PoINT™BB703 Fuente de calibración de cuerpo negro miniatura Diseño portátil y alto rango de temperatura El modelo BB703 se muestra en un tamaño inferior al real.A C T U A L M E N T E D I S P O N I B L E S M o d e l o s c o n R S 232 y s o f t w a r eg r a t u i t o Precisión de la pantalla: 0,3 °C (en toda la gama)Emisividad de la placa del objetivo: 0,95Tamaño: 56 mm de alto x 127 mm de ancho x 155 mm de profundidad Peso: 1,09 Kg.Categoría de instalación: II * El punto de referencia máximo debe reducirse en funcionamiento a temperaturas ambientes que sobrepasen los 25 °C。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
W
WSS系列双金属温度计产品简介WSS Series Bimetallic Thermometer Introduction
本公司生产的双金属温度计产
品具有以下特点：
该温度计采用日本生产的双金属片作为测温元件，测量速度快、精度高。
不锈钢等离子焊外壳，旋压密封工艺，具有较强的抗震，防溅和防腐性能，并且无汞害、易读数、坚固耐用。
广泛应用石油、化工、机械、船舶、发电、纺织、印染、医药等工业和科研部门。
The sensing elements adopt Japan bi-metal spirals.Quick response and high accuracy.
The crimped and is from arc welded AISI 304 St. St. case has very good resistance to vibration, corrosion and splash.
WSS系列双金属温度计是一种适合对流体蒸气的中低温度进行直接测量的测温仪表。
双金属温度计对温度的测量是通过系统内部的由双金属材料制成的螺旋弹簧式双金属片对温度的传感来实现的。
其双金属材料是由两个不可分割的金属片所组成，因为两个金属的片的热膨胀系数不同，因而在温度变化情况下会发生不同程度的伸展变形。
这种伸展变形与温度近似成正比。
金属片一端固定而另一端与指示轴固定为一体，从而在金属片伸展变形时驱动指示轴旋转并在刻度盘上指示出相应的温度值。
WSS series bimetallic thermometers are designed to directly measure low and medium temperature of fluid steam.
The sensing element "Bimetallic Coil" is composed of 2 indivisible metal sheets. Since the 2 metals have different rates of thermal expansion, the bimetal deforms varying with temperature. This expansion is almost in proportion to temperature. The one end of bimetal is fixed, the other end is connected to mechanism to drive pointer.
Bright Instruments Bimetallic
Thermometer features:
MODEL WSS
型号标示：0无固定装置Without fixing device 1可动外螺纹Movable external thread 2可动内螺纹Movable internal thread 3固定外螺纹Fixed external thread 4活动法兰 Movable flange 5滑动螺纹 Siding connection 6 卫生型法兰Sanitary flange 安装方式Mounting D.X. 带电接点 With electric contact M. 台式、壁式 Table,Wall 温度测量仪表Temperature measuring instrument W 金属膨胀式温度计Metal expansion thermometer S 感温元件为热双金属片Bimetal as sensitive element S 表壳公称直径Nominal size of instrument dial 2 - Φ40 ; Φ603 - Φ76 ; Φ80 ;4 - Φ1005 - Φ1276 - Φ150Thermometer 结构形式Construction 0-1-8-轴向型Axial type 径向型Radial type 多角向型Multi-directional type F 防腐型 Corrosion-poof
MODEL WSS
MODEL WSS
WSSF-3(76)8( ); WSSF-4(100)8( ); WSSF-5(127)8( ); WSSF-6(150)8( )
C D
217655
2110055
2212755
MODEL WSS Dimensions
Electric Contact
Bimetallic Thermometer MODEL WSS
WSSM 台式、壁式温度计WSSM Table,Wall Thermometer 适用于空调器、车间、仓库或作为礼品赠送。
Used in air conditioners, plants and warehouses, also a good present to your friends 部分连接方式 Typical Connections SW ——六用形尺寸 I —— 固定部分长度C —— 连接直径或螺纹尺寸S —— 探杆长度L —— 安装长度
卫生型法兰尺寸外形图
Sanitary Flange 活动外螺纹turnable male thread 活动内螺纹turnable female thread 无螺纹连接
threadless
螺纹连接
threaded SW ——hex size I ——fixed length C ——connection or thread size S ——stem length L ——connection length 滑动螺纹连接Sliding thread connection C i SW C i SW C i SW1C i SW 1510(22)G 1/4 A 1017G 1/2 A 1522G 1/2927G 3/8 A 1222M 18x1.5
1522G 3/4932G 1/2 A 12
27M 20x1.51522M 24x1.51232G 3/4 A 1232SW2M 27x212321/4〃NPT 1717G 1/2 A 12271/2〃NPT 2222G 3/4 A 12323/4〃NPT 2227M 20x1.512271/2〃NPT 2227MODEL WSS。