外文期刊的论文要求格式终审稿)
外文学术期刊发表要求
外文学术期刊发表要求在学术研究中，发表在外文学术期刊上是一种非常重要的方式，可以让研究成果被更多的人认可和接受。
然而，不同的学术期刊对于投稿要求都有所不同，因此在选择期刊和投稿之前，作者需要对期刊的发表要求有所了解。
首先，对于外文学术期刊的发表要求，最基本的要求就是语言要求，即文章必须用该期刊所规定的语言进行撰写。
一般来说，大部分外文学术期刊都是以英文为主要发表语言，因此作者需要具备一定的英文写作能力，确保文章在语言表达上没有明显的错误和瑕疵。
其次，外文学术期刊对于文章的内容和结构也有一定的要求。
一篇优秀的学术论文需要有清晰的逻辑结构，包括引言、方法、结果、讨论和结论等部分。
在写作过程中，作者需要注意每个部分的内容安排和逻辑推理，确保文章的结构完整、合理。
另外，外文学术期刊对于参考文献的使用也有一定的规定。
一般来说，期刊要求作者在文章中引用的参考文献必须具有一定的权威性和可信度，来支撑作者的观点和论证。
因此，作者需要在写作过程中，对相关领域的文献进行深入的查找和筛选，确保所引用的文献能够有效地支持自己的研究成果。
此外，外文学术期刊对于图表的使用也有一定的要求。
在撰写学术论文时，作者需要根据期刊的要求，合理地使用图表来展示研究结果和数据，同时确保图表的质量和准确性，让读者能够清晰地理解和接受作者的研究成果。
最后，外文学术期刊对于作者的投稿格式也有一定的规定，包括文章的字数、格式、标点等方面。
在投稿之前，作者需要认真阅读期刊的投稿指南，确保自己的文章符合期刊的格式要求，避免由于格式问题而影响文章的发表。
总之，发表在外文学术期刊上是一种非常重要的学术交流方式，但是在投稿之前，作者需要对期刊的发表要求有所了解，确保自己的文章符合期刊的要求，提高文章被接受发表的几率。
希望本文对大家有所帮助，谢谢阅读。
外文学术期刊发表要求
外文学术期刊发表要求在学术界，发表文章是评价一个学者学术水平的重要标准之一。
而在国际学术界，发表在外文学术期刊上更是被认为是具有重要意义的。
因此，对于想要在国际学术界有所建树的学者来说，了解外文学术期刊的发表要求是非常重要的。
首先，外文学术期刊对于投稿的文章有严格的要求，其中包括文章的主题必须符合期刊的定位和主题范围，文章的内容必须具有学术价值，研究方法必须科学严谨，数据必须可靠，结论必须明确等等。
因此，在撰写文章之前，作者必须对期刊的定位和要求有清晰的了解，确保自己的文章符合期刊的要求。
其次，外文学术期刊对于语言的要求也非常严格。
首先，文章必须使用规范的英文表达，语法错误、拼写错误、句子不通顺等问题都会影响文章的质量。
其次，外文学术期刊通常会对文章的语言进行严格的把关，因此作者需要具备良好的英文写作能力，或者寻求专业的英文编辑进行润色，确保文章的语言表达符合期刊要求。
另外，外文学术期刊对于文献引用的要求也非常重视。
在撰写学术文章时，作者必须准确、规范地引用相关的文献资料，避免抄袭和剽窃他人成果。
此外，外文学术期刊通常会对文献引用的格式和规范有明确的要求，作者需要严格按照期刊的要求进行文献引用，确保文章的学术严谨性。
最后，外文学术期刊对于图表、数据的呈现也有一定的规定。
在撰写学术文章时，作者需要清晰、准确地呈现研究所得的图表和数据，确保其可读性和可理解性。
同时，外文学术期刊通常会对图表、数据的格式和排版有一定的要求，作者需要按照期刊的要求进行呈现，避免因格式问题而影响文章的发表。
总之，想要在外文学术期刊上发表文章并不是一件容易的事情，作者需要对期刊的要求有清晰的了解，确保自己的文章符合期刊的要求。
同时，良好的英文写作能力、规范的文献引用、清晰准确的图表数据呈现等也是影响文章能否被期刊接受的重要因素。
希望广大学者能够在撰写学术文章时，严格遵守期刊的要求，努力提升自身的学术水平，为国际学术交流做出更多的贡献。
外文参考文献及翻译稿的要求与格式
百度文库- 让每个人平等地提升自我！外文参考文献及翻译稿的要求及格式一、外文参考文献的要求1、外文原稿应与本研究项目接近或相关联；2、外文原稿可选择相关文章或节选章节，正文字数不少于1500字。
3、格式：外文文献左上角标注“外文参考资料”字样，小四宋体。
1.5倍行距。
标题：三号，Times New Roman字体加粗，居中，行距1.5倍。
段前段后空一行。
作者（居中）及正文：小四号，Times New Roman字体，首行空2字符。
4、A4纸统一打印。
二、中文翻译稿1、中文翻译稿要与外文文献匹配，翻译要正确；2、中文翻译稿另起一页；3、格式：左上角标“中文译文”，小四宋体。
标题：宋体三号加粗居中，行距1.5倍。
段前、段后空一行。
作者（居中）及正文：小四号宋体，数字等Times New Roman字体，1.5倍行距，首行空2字符。
正文字数1500左右。
4、A4纸统一打印。
格式范例如后所示。
百度文库 - 让每个人平等地提升自我！外文参考文献Implementation of internal controls of small andmedium-sized pow erStephen Ryan The enterprise internal control carries out the strength to refer to the enterprise internal control system execution ability and dynamics, it is the one whole set behavior and the technical system, is unique competitive advantage which the enterprise has; Is a series of …………………………标题：三号，Times New Roman字体加粗，居中，行距1.5倍。
外文期刊论文格式
外文期刊论文格式【篇一：外文期刊的论文要求格式】your papers title starts here: please centeruse helvetica (arial) 14full first author1, a, full second author2,b and last author3,c12full address of first author, including country3full address of second author, including country list all distinct addresses in the same wayaemail, bemail, cemailkeywords: list the keywords covered in your paper. these keywords will also be used by the publisher to produce a keyword index.for the rest of the paper, please use times roman (times new roman) 12abstract. this template explains and demonstrates how to prepare your camera-ready paper for trans tech publications. the best is to read these instructions and follow the outline of this text. please make the page settings of your word processor to a4 format (21 x 29,7 cm or 8 x 11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in),right/left margins must be 2 cm (0.78 in). (we shall be able to publish your paper in electronic form on our web page , if the paper format and the margins are correct. if not, we will have to scan your paper which, when compared with an electronic version, results in very poor quality) your manuscript will be reduced by approximately 20% by the publisher. please keep this in mind when designing your figures and tables etc.introductionall manuscripts must be in english, also the table and figure texts, otherwise we cannot publish your paper.please keep a second copy of your manuscript in your office. when receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. should authors use tables or figures from other publications, they must ask the corresponding publishers to grant them the right to publish this material in their paper.use italic for emphasizing a word or phrase. do not use boldface typing or capital letters except for section headings (cf. remarks on section headings, below).organization of the textsection headings. the section headings are in boldface capital and lowercase letters. second level headings are typed as part of the succeeding paragraph (like the subsection heading of this paragraph). page numbers. do not number your paper:tables. tables (refer with: table 1, table 2, ...) should be presented as part of the text, but in such a way as to avoid confusion with the text. a descriptive title should be placed above each table. units in tables should be given in square brackets [mev]. if square brackets are not available, use curly {mev} or standard brackets (mev).macros. do not use any macros for the figures and tables. (we will not be able to convert such papers into our system)language. all text, figures and tables must be in english. figures. figures (refer with: fig. 1, fig. 2, ...) also should be presented as part of the text, leaving enough space so that the caption will not be confused with the text. the caption should be self-contained and placed below or beside the figure. generally, only original drawings or photographic reproductions are acceptable. only very good photocopies are acceptable. utmost care must be taken to insert the figures in correct alignment with the text. half-tone pictures should be in the form of glossy prints. if possible, please include your figures as graphic images in the electronic version. for best quality the pictures should have a resolution of 300 dpi(dots per inch).color figures are welcome for the online version of the journal. generally, these figures will be reduced to black and white for the print version. the author should indicate on the checklist if he wishes to have them printed in full color and make the necessary payments in advance.equations. equations (refer with: eq. 1, eq. 2, ...) should be indented 5 mm (0.2). there should be one line of space above the equation and one line of space below it before the text continues. the equations have to be numbered sequentially, and the number put in parentheses at the right-hand edge of the text. equations should be punctuated as if they were anordinary part of the text. punctuation appears after the equation but before the equation number, e.g.c2 = a2 + b2. (1) literature referencesreferences are cited in the text just by square brackets [1]. (if square brackets are not available, slashes may be used instead, e.g. /2/.) two or more references at a time may be putin one set of brackets [3,4]. the references are to be numbered in the order in which they are cited in the text and are to be listed at the end of the contribution under a heading references, see our example below. summaryif you follow the “checklist” your paper will conform to the requirements of the publisher and facilitate a problem-free publication process.references[1] dj.m. maric, p.f. meier and s.k. estreicher: mater. sci. forum vol. 83-87 (1992), p. 119[2] m.a. green: high efficiency silicon solar cells (trans tech publications, switzerland 1987).[3] y. mishing, in: diffusion processes in advanced technological materials, edtied by d. guptanoyes publications/william andrew publising, norwich, ny (2004), in press.chemistry, edited by s.d. schwartz, volume 5 of progress in theoretical chemistry and physics, chapter, 10, kluwer academic publishers (2000).[5] r.j. ong, j.t. dawley and p.g. clem: submitted to journal of materials research (2003)从这里开始你的论文的标题：请中心使用helvetica字体（宋体）14全第一author1，整个第二author2，b和最后author31full地址的第一作者，包括国家第二作者2full地址，包括国家3list所有不同的地址，以同样的方式aemail，bemail，cemail关键词：列出你的论文中所涉及的关键字。
外文期刊发表编辑要求
外文期刊发表编辑要求
在撰写外文期刊发表的论文时，作者需要严格遵守期刊的编辑要求，以确保论文能够成功发表。
下面将介绍一些常见的外文期刊发表编辑要求，希望能够对广大作者有所帮助。
首先，对于论文的格式要求，大部分外文期刊都会有自己的格式要求，包括论文的字数限制、标题格式、参考文献格式等。
作者在撰写论文时，应当仔细阅读期刊的投稿指南，并严格按照要求进行排版。
否则，即使论文内容再好，也有可能因为格式问题而被拒稿。
其次，外文期刊对于论文的语言要求也非常严格。
大部分期刊都要求论文必须使用规范的英语撰写，语法错误和拼写错误会对论文的评审产生负面影响。
因此，作者在写作时应当注意语言的准确性和流畅性，可以借助语言编辑工具进行润色。
此外，外文期刊对于学术道德和版权要求也非常重视。
作者在投稿前，必须确保论文的原创性，不得存在抄袭、剽窃等行为。
同时，作者需要清楚注明引用他人研究成果的部分，并获得原作者的授权。
否则，一旦被发现存在学术不端行为，将会对作者的学术声誉和论文发表产生严重影响。
最后，外文期刊对于论文内容的要求也非常严格。
论文必须具有学术研究的独创性和深度，不能是简单的重复他人研究成果。
同时，论文的结构和逻辑也必须清晰，能够符合期刊的学术标准。
因此，作者在写作时应当注重论文的深度和广度，确保论文内容能够吸引读者并具有学术影响力。
总之，外文期刊发表编辑要求对于作者来说是非常重要的，只有严格遵守这些要求，才能够提高论文被接受的几率。
希望广大作者能够在撰写论文时，认真对待期刊的编辑要求，努力提升论文的质量，为学术研究做出更大的贡献。
外文期刊论文格式
外文期刊论文格式【篇一：外文期刊的论文要求格式】your papers title starts here: please centeruse helvetica (arial) 14full first author1, a, full second author2,b and last author3,c12full address of first author, including country3full address of second author, including country list all distinct addresses in the same wayaemail, bemail, cemailkeywords: list the keywords covered in your paper. these keywords will also be used by the publisher to produce a keyword index.for the rest of the paper, please use times roman (times new roman) 12abstract. this template explains and demonstrates how to prepare your camera-ready paper for trans tech publications. the best is to read these instructions and follow the outline of this text. please make the page settings of your word processor to a4 format (21 x 29,7 cm or 8 x 11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in),right/left margins must be 2 cm (0.78 in). (we shall be able to publish your paper in electronic form on our web page , if the paper format and the margins are correct. if not, we will have to scan your paper which, when compared with an electronic version, results in very poor quality) your manuscript will be reduced by approximately 20% by the publisher. please keep this in mind when designing your figures and tables etc.introductionall manuscripts must be in english, also the table and figure texts, otherwise we cannot publish your paper.please keep a second copy of your manuscript in your office. when receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. should authors use tables or figures from other publications, they must ask the corresponding publishers to grant them the right to publish this material in their paper.use italic for emphasizing a word or phrase. do not use boldface typing or capital letters except for section headings (cf. remarks on section headings, below).organization of the textsection headings. the section headings are in boldface capital and lowercase letters. second level headings are typed as part of the succeeding paragraph (like the subsection heading of this paragraph). page numbers. do not number your paper:tables. tables (refer with: table 1, table 2, ...) should be presented as part of the text, but in such a way as to avoid confusion with the text. a descriptive title should be placed above each table. units in tables should be given in square brackets [mev]. if square brackets are not available, use curly {mev} or standard brackets (mev).macros. do not use any macros for the figures and tables. (we will not be able to convert such papers into our system)language. all text, figures and tables must be in english. figures. figures (refer with: fig. 1, fig. 2, ...) also should be presented as part of the text, leaving enough space so that the caption will not be confused with the text. the caption should be self-contained and placed below or beside the figure. generally, only original drawings or photographic reproductions are acceptable. only very good photocopies are acceptable. utmost care must be taken to insert the figures in correct alignment with the text. half-tone pictures should be in the form of glossy prints. if possible, please include your figures as graphic images in the electronic version. for best quality the pictures should have a resolution of 300 dpi(dots per inch).color figures are welcome for the online version of the journal. generally, these figures will be reduced to black and white for the print version. the author should indicate on the checklist if he wishes to have them printed in full color and make the necessary payments in advance.equations. equations (refer with: eq. 1, eq. 2, ...) should be indented 5 mm (0.2). there should be one line of space above the equation and one line of space below it before the text continues. the equations have to be numbered sequentially, and the number put in parentheses at the right-hand edge of the text. equations should be punctuated as if they were anordinary part of the text. punctuation appears after the equation but before the equation number, e.g.c2 = a2 + b2. (1) literature referencesreferences are cited in the text just by square brackets [1]. (if square brackets are not available, slashes may be used instead, e.g. /2/.) two or more references at a time may be putin one set of brackets [3,4]. the references are to be numbered in the order in which they are cited in the text and are to be listed at the end of the contribution under a heading references, see our example below. summaryif you follow the “checklist” your paper will conform to the requirements of the publisher and facilitate a problem-free publication process.references[1] dj.m. maric, p.f. meier and s.k. estreicher: mater. sci. forum vol. 83-87 (1992), p. 119[2] m.a. green: high efficiency silicon solar cells (trans tech publications, switzerland 1987).[3] y. mishing, in: diffusion processes in advanced technological materials, edtied by d. guptanoyes publications/william andrew publising, norwich, ny (2004), in press.chemistry, edited by s.d. schwartz, volume 5 of progress in theoretical chemistry and physics, chapter, 10, kluwer academic publishers (2000).[5] r.j. ong, j.t. dawley and p.g. clem: submitted to journal of materials research (2003)从这里开始你的论文的标题：请中心使用helvetica字体（宋体）14全第一author1，整个第二author2，b和最后author31full地址的第一作者，包括国家第二作者2full地址，包括国家3list所有不同的地址，以同样的方式aemail，bemail，cemail关键词：列出你的论文中所涉及的关键字。
外文期刊论文格式推荐
外文期刊论文格式推荐
古典文学中常见论文这个词，当代，论文常用来指进行各个学术领域的研究和描述学术研究成果的*，简称为论文。
以下就是由编为您提供的外文期刊论文格式。
1、题目。
应能概括整个论文最重要的内容，言简意赅，引人注目，一般不宜超过20个字。
论文摘要和关键词。
2、论文摘要应阐述学位论文的主要观点。
说明本论文的目的、研究方法、成果和结论。
尽可能保留原论文的基本信息，突出论文的创造性成果和新见解。
而不应是各章节标题的简单罗列。
摘要以500字左右为宜。
关键词是能反映论文主旨最关键的词句，一般3-5个。
3、目录。
既是论文的提纲，也是论文组成部分的小标题，应标注相应页码。
4、引言(或序言)。
内容应包括本研究领域的国内外现状，本论文所要解决的问题及这项研究工作在经济建设、科技进步和社会发展等方面的理论意义与实用价值。
5、正文。
是毕业论文的主体。
6、结论。
论文结论要求明确、精炼、完整，应阐明自己的创造性成果或新见解，以及在本领域的意义。
7、参考文献和注释。
按论文中所引用文献或注释编号的顺序列在论文正文之后，参考文献之前。
图表或数据必须注明****和出处。
* l。
英文论文投稿要求格式
英⽂论⽂投稿要求格式The Journal features primary research in the following:Genomics and gene mappingGene action, regulation and transmissionBioinformatics and computational geneticsMolecular adaptation and selectionReproductive strategies and kinship analysisQuantitative genetics and Mendelian inheritanceMolecular systematics and phylogeneticsPopulation structure and phylogeographyConservation genetics and biodiversityTo be accepted for publication, a manuscript must make a significant contribution to one or more of these subject areas and be of general interest to the members of the American Genetic Association.The Journal publishes(1) Articles: important original research(2) Brief Communications: short communications on current research, important preliminary findings or new techniques(3) Computer Notes: short communications on new computer programs and applications(4) Letters: responses to papers previously published in Journal of Heredity, as well as opinion, interpretation, and new informationThe Journal also publishes, by invitation, Book Reviews, Review Articles, Perspectives and Symposium ArticlesPREPARATION OF THE MANUSCRIPTPlease read and follow these instructions carefully, doing so will ensure that the publication of your manuscript is as rapid and efficient as possible. The Publisher reserves the right to return manuscripts that are not prepared in accordance with these instructions.Papers must be clearly written in English. Authors whose native language is not English should arrange to have their manuscripts written in idiomatic English before they are submitted for publication. Papers lacking proper English structure and usage will not be considered for publication and will be returned to the author without review. If you would like additional help with the quality of your written English, including grammar, spelling, and language usage, visit Oxford Journals Lanuage Services.GeneralManuscripts should be prepared using a Word processing program, saved as a .doc (Word) or .rtf (rich-text format) file, and typed, double-spaced, with 1-inch margins on 8 1/2-by-11-inch paper. There is no page limit, but it is recommended that manuscripts not exceed 16 typewritten pages. Long papers are subject to delays in reviewing and editorial consideration. Metric units should be used where applicable. Pages should be arranged and numbered consecutively in the following order:title pageabstract with 3-6 keywordstextfunding and acknowledgmentsreferencesfigure and table legendsfigures and tables (separate files)Title pageThe title page (page 1) should contain the title of the article; the author’s first and last name(s) and affiliation(s) with complete addresses; e-mail addresses; and a running title. The title should concisely inform the reader of the subject of the paper and the organism to which it relates, including common name; it should contain no more than 75 characters. A subtitle can be used when greater length is unavoidable.AbstractAn abstract is required. It should consist of one paragraph of no more than 200 words that is complete without reference to the text. Acronyms and complex abbreviations should not be used. References to literature, figures, and tables should not be included. Below the abstract, provide 306 keywords or short phrases that will assist in cross-indexing your article.TextThe text should be readable, clear, and concise. First-person active voice is preferable to the impersonal passive voice. Authors whose native language is not English should arrange to have their manuscripts writtenin idiomatic English before they are submitted for publication. Papers lacking proper English structure and usage will not be considered for publication and will be returned to the author without review. Standard nomenclature should be used for organisms for which formal rules have been established and published. For these, authors are referred to the CSE Manual for Authors, Editors, and Publishers: Scientific Style and Format (7th ed.). Unfamiliar or new terms, as well as abbreviations, acronyms, and symbols, should be defined at first mention. Italics should not be used for emphasis. Footnotes should be avoided; descriptive material should be parenthetically included in the text. All tables and figures must be referred to in the text.Funding and AcknowledgementsDetails of all funding sources for the work in question should be given in a separate section following the Discussion entitled 'Funding'. A separate page is not necessary. These rules should be followed:The sentence should begin: ‘This work was supported by …’ The full official funding agency name should be given, i.e.‘the National Cancer Institute at the National Institutes of Health’ or s imply 'National Institutes of Health' not ‘NCI' (one of the 27 subinstitutions) or 'NCI at NIH’. Grant numbers should becomplete and accurate and provided in brackets as follows: ‘(grant number ABX CDXXXXXX)’Multiple grant numbers should be separated by a comma as follows: ‘(grant numbers ABX CDXXXXXX, EFX GHXXXXXX)’Agencies should be separated by a semi-colon (plus ‘and’ before the last funding agency)Where individuals need to be specified for certain sources of funding the following text should be added after the relevant agency or grant number 'to [author initials]'.An example is given here: ‘This work was supported by the National Institutes of Health (P50 CA098252 and CA118790 to R.B.S.R.); and the Alcohol & Education Research Council (hfygr667789).’Oxford Journals will deposit all NIH-funded articles in PubMed Central. See/doc/22cfc775f46527d3240ce021.html /for_authors/repositories.html for details. Authors must ensure that manuscripts are clearly indicated as NIH-funded using the guidelines above.An 'Acknowledgments' section may follow the Funding Section. It should not include the funding agencies. A full list of RIN-approved UK funding agencies may be found here.ReferencesReferences should be typed alphabetically on a separate page,double-spaced and unnumbered. They should be referred to in the text by the name(s) of the first author(s) and the year of publication in parentheses, e.g., (Able and Baker 1987b). Use the first author’s name and ‘‘et al.’’ When there are more than two authors. The order for references within parentheses in the text should be alphabetical. For works by the same author(s) in the same year, append a lowercase a, b, c, etc., to the year of publication. The reference list should contain all authors’names for up to 10 authors and conform to the following styles:Journal articleAuthor AB, Author CD, Author EF, 1984. Title of article. J Hered.60:128-132.Paper in a conference proceeding(s)Author AB, Author IJ, Author KL, 1985. Title of conference paper.In: Able ST, editor. Title of Symposium or Conference: subtitle;2006 Jan 1-3, location of conference. City of publisher: Publisher.p. 100-112.BookAuthor GH, Author IJ, 1985a. Title of book. Rye (NY): Publisher's Name.Chapter in a bookAuthor GH, Author IJ, 1985b. Title of a chapter: a subtitle. In: Able MN, Baker OP, editors. Title of book, 2nd ed. Philadelphia: Publisher's Name; p. 200-235.Thesis or dissertationAuthor MN, 1985. Title of thesis or dissertation [contentdesignator]. Berkeley(CA): Name of University. 235 p.Internet sourcesAuthor CH. Date of publication. Title. [cited 2005 May 31].Available from: /doc/22cfc775f46527d3240ce021.html .Only published references or references accepted for publication should be included in the reference list; such things as personal communications, unpublished aata, manuscripts in preparation, etc., should be incorporated in the text in parentheses and include the initials and surname of the source, e.g., (OP Able, personal communication). Whenciting Internet sources, please provide a complete URL address and the date on which the page was accessed or updated. Authors are responsible for the accuracy of their references.Table legends and figure captionsTable legends and figure captions should be typed together on a separate page. They should define all symbols and abbreviations used in each figure.Nucleotide and amino acid sequencesNewly reported nucleotide or amino acid sequences, and structural coordinates, mustbe submitted to appropriate public databases (e.g., GenBank; the EMBL Nucleotide Sequence Database ; DNA Database of Japan; the Protein Data Bank ; and Swiss-Prot. Accession numbers must be included in the final version of the manuscript.FiguresJournal of Heredity is happy to announce the inclusion of the Flexible Color Option. All figures submitted to the journal in color will be published in color online at no cost (unless the author specifically requests that their figures be in black and white online). Authors may choose to also publish their figures in color in the print journal for $600 per figure: you will be asked to approve this cost in an e-mail after your article is accepted, and will be issued an invoice at the time of publication. Authors who opt to publish black and white in print, should submit one figure caption that will work for both color and grayscale.Figures should be supplied in an electronic format at a suitable size for printing with the following resolutions: 600 dots per inch (dpi) for line drawings; 300 dpi for halftones and color; 600 dpi for combinations. We prefer figure files to be submitted as.tif files. Because of minimum resolution requirements, we cannot accept figures submitted as .jpg files.Please note that unacceptable figures will delay publication. ‘‘Digital Expert’’ software is available free from The Sheridan Group. Please use this program to check that electronic figures are in a format suitable for publishing. If the figures are not suitable the Digital Expert will offer instructions for fixing the figures.If your .tif figure files are very large, you may include .doc, .pdf, .ppt or .jpg files in your initial submission. Please note in your cover letter that you will submit the final files upon acceptance of your manuscript.SUPPLEMENTARY MATERIALAll material to be considered as supplementary material must be submitted online at the same time as the main manuscript. Please indicate clearly the material intended as Supplementary Material upon submission. Also ensure that the supplementary material is referred to in the main manuscript at an appropriate point in the text.Please note that supplementary material will be available online only and will not be copyedited, so ensure that it is clearly and succinctly presented, and that the style of terms conforms with the rest of the paper. Also ensure that the presentation will work on any Internet browser. A maximum of 5 files is acceptable to make up the supplementary material unit for an article. The maximum size per file should not exceed 2 MB. Unlike figure files that will be typeset, supplementary figure files may be in any appropriate format (.doc, .jpg, etc).SUBMISSION OF MANUSCRIPTSAll material to be considered for publication in the Journal of Heredity should be submitted in electronic form via the journal's online submission system. Full instructions for online submission can be found here or via the online submission site. If for exceptional reasons you are unable to submit your manuscript via the online submission system, please contact the editorial office.COPYRIGHTIt is a condition of publication that authors assign exclusive copyright to the AGA. In assigning copyright, authors may use their own material in other publications, provided that the Journal is acknowledged as the original place of publication, and both the editor and Oxford University Press are notified in writing and in advance.On acceptance, copyright forms should be returned immediately by fax to OUP, and a copy must be posted by airmail within 24 hours. If the form has not been received at OUP by the time the manuscript arrives, publication of the article will be delayed.Work submitted for publication must be original, previously unpublished, and not under consideration for publication elsewhere. If previously published figures, tables or parts of text are to be included, he copyright-holder’s permission must have been obtained prior to submission.OPEN ACCESS OPTION FOR AUTHORSJournal of Heredity authors have the option, at an additional charge, to make their paper freely available online immediately upon publication, under the Oxford Open initiative. After the manuscript is accepted, as part of the mandatory copyright form required of all corresponding authors, authors will be asked to indicate whether or not they wish to pay to have the paper made freely available immediately. If the Open Access option is not selected, the paper will be published with standard subscription-based access and no charges will be incurred by the author. For those selecting the Open Access option, the charges for Journal of Heredity vary depending on the institution at which the corresponding author is based:Optional Oxford Open charges can be found here:/doc/22cfc775f46527d3240ce021.html /oxfordopen/charges.htmlThe above Open Access charges are in addition to any page charges and colour charges that might apply.Orders from UK will be subject to a 17.5% VAT charge. For orders from the rest of the EU, we will assume that the service is provided for business purposes, please provide a VAT number for yourself or your institution and ensure you account for your own local VAT correctly.If you choose the Open Access option you will also be asked to complete an Open Access charge form online. You will be automatically directed to the appropriate version of the form depending on whether you are based at an institution with an online subscription to Journal of Heredity. Therefore please make sure that you are using an institutional computer when accessing the form. To check whether you are based at a subscribing institution please use the Subscriber Test link forJournal of Heredity.Please see these guidelines for reuse of Oxford Open content. PROOFSAll manuscripts will undergo some editorial modification so it is important to check proofs carefully. PDF page proofs will be sent to the corresponding author for checking via email. To avoid delays in publication, proofs should be checked and returned within 48 hours. Corrections should be returned by PDF annotation, e-mail, fax, or courier (FedEx or DHL) to the Production Editor. Extensive changes to the text may be charged to the author.PAGE CHARGESA page charge of $60 per published page will be made for all papers. In cases in which research funds are not available to meet publication costs, the author should submit a statement to the editor once the paper is accepted for publication, specifying the reasons for lack of funds and requesting a waiver of the publication charge. Charges for color figures in print cannot be waived. No paper will be rejected because of the lack of funds, but publication may be delayed if charges are not paid. Authors will receive a form with their page proofs showing the page charge and reprint prices.Page charges of one article per volume will be waived for authors who are members of the American Genetic Association. Cost of membership is currently $67. Authors who wish to join the Association will receive membership forms and a page charge discount offer with their article proofs.OFFPRINTSIn addition to an AGA membership form, an offprint order form will accompany the proofs. Authors may purchase print and/or electronic offprints and journal copies at a discount (50%) using this form. Please see offprint forms for complete ordering and pricing information.COVER CONSIDERATIONA full-color illustration is featured on the cover of each issue, the cost of which is borne by the journal. Authors whose photo is used on the cover receive a complimentary PDF of the typeset cover for printing and distribution. The cover is available to any contributor whose manuscript is accepted for publication, providing the photographic material is of high quality. For electronic submission of potential cover images, pleasesend the image at 350 dpi CMYK as both a .jpg and a .tif or .eps file to the editorial office; the .jpg will be used for evaluation only.PERMISSIONS FOR ILLUSTRATIONS AND FIGURESPermission to reproduce copyright material, for print and online publication in perpetuity, must be cleared and if necessary paid for by the author; this includes applications and payments to DACS, ARS, and similar licensing agencies where appropriate. Evidence in writing that such permissions have been secured from the rights-holder must be made available to the editors. It is also the author's responsibility to include acknowledgements as stipulated by the particular institutions. Oxford Journals can offer information and documentation to assist authors in securing print and online permissions: please see the Guidelines for Authors section. Information on permissions contacts for a number of main galleries and museums can also be provided. Should you require copies of this, please contact the editorial office of the journal in question or the Oxford Journals Rights department.AUTHOR SELF-ARCHIVING/PUBLIC ACCESS POLICYFor information about this journal's policy, please visit our Author Self-Archiving policy page.CONFLICT OF INTERESTOxford University Press requires declaration of any conflict of interest upon onlinesubmission. If the manuscript is published, conflict of interest information will be communicated in a statement in the published paper.THE STEPHEN J. O'BRIEN AWARDThe Stephen J. O'Brien Award for the best student paper published in the Journal of Heredity the previous year will be awarded at the annual meeting of the AGA and will include a cash prize of $1,000. The award is intended to honor Dr.O'Brien's many years of exemplary service as Chief Editor of the Journal of Heredity. Papers are eligible for the award if the first author was a registered student at the time of manuscript submission. Please note in your cover letter if your manuscript fits the criteria for the award.If you have questions, please contact Anjanette Baker, Managing Editor.The JournalAbout this journalPublishers' Books for ReviewRights & PermissionsDispatch date of the next issueThis journal is a member of the Committee on Publication Ethics (COPE) Published on behalf ofThe American Genetic AssociationImpact factor: 1.775Editor-in-ChiefC. Scott BakerView full editorial boardFor AuthorsInstructions to authorsAuthor Self Archiving PolicySubmit now!Online submission instructionsOptional Open Access is Available - Visit Oxford OpenThis journal enables compliance with the NIH Public Access Policy Alerting Services Email table of contentsEmail Advance AccessCiteTrackXML RSS feedCorporate ServicesAdvertising salesReprintsSupplements。
英文论文格式
英文论文格式The format of an English research paper typically follows a standard structure, which includes the following sections:1. Title: The title should be concise and accurately represent the content of the paper.2. Abstract: A brief summary of the paper, usually around 150-250 words. It should provide an overview of the research question, methods, results, and main conclusions.3. Introduction: Introduce the topic, provide background information, and state the research question or objective of the study.4. Literature Review: Review previous research and studies related to the topic. Identify gaps or controversies in the existing literature and explain how your research addresses these gaps.5. Methodology: Describe the research design, data collection methods, and analysis techniques used in your study. Provide detailed information on how the study was conducted to ensure reproducibility.6. Results: Present the findings of your research, using tables, graphs, or other visual aids to support your conclusions. Use clear and concise language to summarize the results without interpretation or discussion.7. Discussion: Interpret and analyze the results in the context of theresearch question. Discuss the implications and significance of the findings, and relate them to the existing literature. Address any limitations or potential biases of the study.8. Conclusion: Summarize the main findings of your research, restate the research question, and discuss the implications of your study. Avoid introducing new information or making unsupported claims.9. References: Cite all sources used in your paper, following a consistent citation style (such as APA, MLA, or Chicago Manualof Style). Include all necessary information for readers to locate the original sources.10. Appendices (optional): Include additional materials, such as survey questionnaires, raw data, or supplementary analyses, if necessary.It is important to note that the specific requirements for the format of an English research paper may vary depending on the institution, academic discipline, or journal to which you submit the paper. Always check the guidelines or instructions provided by the target publication for any specific formatting requirements.。
外文期刊的论文要求格式
Your Paper's Title Starts Here: Please Centeruse Helvetica (Arial) 14FULL First Author1, a, FULL Second Author2,b and Last Author3,c1Full address of first author, including country2Full address of second author, including country3List all distinct addresses in the same waya email,b email,c emailKeywords: List the keywords covered in your paper. These keywords will also be used by the publisher to produce a keyword index.For the rest of the paper, please use Times Roman (Times New Roman) 12Abstract. This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text. Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8?x?11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in).(We shall be able to publish your paper in electronic form on our web page , if the paper format and the margins are correct. If not, we will have to scan your paper which, when compared with an electronic version, results in very poor quality)Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind when designing your figures and tables etc.IntroductionAll manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper.Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. Should authors use tables or figures from other Publications, they must ask the corresponding publishers to grant them the right to publish this material in their paper.Use italic for emphasizing a word or phrase. Do not use boldface typing or capital letters except for section headings (cf. remarks on section headings, below).Organization of the TextSection Headings. The section headings are in boldface capital and lowercase letters. Second level headings are typed as part of the succeeding paragraph (like the subsection heading of this paragraph).Page Numbers. Do not number your paper:Tables. Tables (refer with: Table 1, Table 2, ...) should be presented as part of the text, but in such a way as to avoid confusion with the text. A descriptive title should be placed above each table. Units in tables should be given in square brackets [meV]. If square brackets are not available, use curly {meV} or standard brackets (meV).Special Signs. for example , αγμΩ () ≥ ± ● Γ {1120}should always be written in with the fonts Times New Roman or Arial, especially also in the figures and tables.Macros. Do not use any macros for the figures and tables. (We will not be able to convert such papers into our system)Language. All text, figures and tables must be in English.Figures. Figures (refer with: Fig.?1, Fig.?2, ...) also should be presented as part of the text, leaving enough space so that the caption will not be confused with the text. The caption should be self-contained and placed below or beside the figure. Generally, only original drawings or photographic reproductions are acceptable. Only very good photocopies are acceptable. Utmost care must be taken to insert the figures in correct alignment with the text. Half-tone pictures should be in the form of glossy prints. If possible, please include your figures as graphic images in the electronic version. For best quality the pictures should have a resolution of 300 dpi(dots per inch).Color figures are welcome for the online version of the journal. Generally, these figures will be reduced to black and white for the print version. The author should indicate on the checklist if he wishes to have them printed in full color and make the necessary payments in advance.Equations.Equations (refer with: Eq.?1, Eq.?2, ...) should be indented 5 mm (0.2"). There should be one line of space above the equation and one line of space below it before the text continues. The equations have to be numbered sequentially, and the number put in parentheses at the right-hand edge of the text. Equations should be punctuated as if they were an ordinary part of the text. Punctuation appears after the equation but before the equation number, e.g.c2 = a2 + b2. (1)Literature ReferencesReferences are cited in the text just by square brackets [1]. (If square brackets are not available, slashes may be used instead, e.g. /2/.) Two or more references at a time may be put in one set of brackets [3,4]. The references are to be numbered in the order in which they are cited in the text and are to be listed at the end of the contribution under a heading References, see our example below. SummaryIf you follow the “c hecklist”your paper will conform to the requirements of the publisher and facilitate a problem-free publication process.References[1] Dj.M. Maric, P.F. Meier and S.K. Estreicher: Mater. Sci. Forum Vol. 83-87 (1992), p. 119[2] M.A. Green: High Efficiency Silicon Solar Cells (Trans Tech Publications, Switzerland 1987).[3] Y. Mishing, in: Diffusion Processes in Advanced Technological Materials, edtied by D. GuptaNoyes Publications/William Andrew Publising, Norwich, NY (2004), in press.[4] G. Henkelman, G.Johannesson and H. Jónsson, in: Theoretical Methods in Condencsed PhaseChemistry, edited by S.D. Schwartz, volume 5 of Progress in Theoretical Chemistry and Physics, chapter, 10, Kluwer Academic Publishers (2000).[5] R.J. Ong, J.T. Dawley and P.G. Clem: submitted to Journal of Materials Research (2003)[6] P.G. Clem, M. Rodriguez, J.A. Voigt and C.S. Ashley, U.S. Patent 6,231,666. (2001)[7]从这里开始你的论文的标题：请中心使用Helvetica字体（宋体）14全第一Author1，整个第二Author2，B和最后Author31Full地址的第一作者，包括国家第二作者2Full地址，包括国家3List所有不同的地址，以同样的方式aemail，bemail，cemail关键词：列出你的论文中所涉及的关键字。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
外文期刊的论文要求格式文稿归稿存档编号：[KKUY-KKIO69-OTM243-OLUI129-G00I-FDQS58-Your Paper's Title Starts Here: Please Centeruse Helvetica (Arial) 14FULL First Author1, a, FULL Second Author2,b and Last Author3,c1Full address of first author, including country2Full address of second author, including country3List all distinct addresses in the same waya email,b email,c emailKeywords: List the keywords covered in your paper. These keywords will also be used by the publisher to produce a keyword index.For the rest of the paper, please use Times Roman (Times New Roman) 12 Abstract. This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text.Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8x11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in).(We shall be able to publish your paper in electronic form on our web page , if the paper format and the margins are correct. If not, we will have to scan your paper which, when compared with an electronic version, results in very poor quality)Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind when designing your figures and tables etc.IntroductionAll manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper.Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. Should authors use tables or figures from other Publications, they must ask the corresponding publishers to grant them the right to publish this material in their paper.Use italic for emphasizing a word or phrase. Do not use boldface typing or capital letters except for section headings (cf. remarks on section headings, below).Organization of the TextSection Headings. The section headings are in boldface capital and lowercase letters. Second level headings are typed as part of the succeeding paragraph(like the subsection heading of this paragraph).Page Numbers. Do not number your paper:Tables.Tables (refer with: Table 1, Table 2, ...) should be presented aspart of the text, but in such a way as to avoid confusion with the text. A descriptive title should be placed above each table. Units in tables should begiven in square brackets [meV]. If square brackets are not available, usecurly {meV} or standard brackets (meV).Special Signs. for example , αγμΩ() ≥ ± ● Γ{1120} should always be written in with the fonts Times New Roman or Arial, especially alsoin the figures and tables.Macros. Do not use any macros for the figures and tables. (We will not beable to convert such papers into our system)Language. All text, figures and tables must be in English.Figures. Figures (refer with: Fig.1, Fig.2, ...) also should be presented aspart of the text, leaving enough space so that the caption will not be confused with the text. The caption should be self-contained and placed belowor beside the figure. Generally, only original drawings or photographic reproductions are acceptable. Only very good photocopies are acceptable. Utmost care must be taken to insert the figures in correct alignment with thetext. Half-tone pictures should be in the form of glossy prints. If possible, please include your figures as graphic images in the electronic version. Forbest quality the pictures should have a resolution of 300 dpi(dots per inch).Color figures are welcome for the online version of the journal. Generally,these figures will be reduced to black and white for the print version. The author should indicate on the checklist if he wishes to have them printed infull color and make the necessary payments in advance.Equations. Equations (refer with: Eq.1, Eq.2, ...) should be indented 5 mm(0.2"). There should be one line of space above the equation and one line ofspace below it before the text continues. The equations have to be numbered sequentially, and the number put in parentheses at the right-hand edge of thetext. Equations should be punctuated as if they were an ordinary part of thetext. Punctuation appears after the equation but before the equation number,e.g.c2 = a2 + b2.(1)Literature ReferencesReferences are cited in the text just by square brackets [1]. (If square brackets are not available, slashes may be used instead, e.g. /2/.) Two ormore references at a time may be put in one set of brackets [3,4]. The references are to be numbered in the order in which they are cited in the textand are to be listed at the end of the contribution under a heading References, see our example below.SummaryIf you follow the “c hecklist” your paper will conform to the requirements of the publisher and facilitate a problem-free publication process.References[1] Dj.M. Maric, P.F. Meier and S.K. Estreicher: Mater. Sci. Forum Vol. 83-87 (1992), p. 119[2] M.A. Green: High Efficiency Silicon Solar Cells (Trans Tech Publications, Switzerland 1987).[3] Y. Mishing, in: Diffusion Processes in Advanced Technological Materials,edtied by D. Gupta Noyes Publications/William Andrew Publising, Norwich, NY (2004), in press.[4] G. Henkelman, G.Johannesson and H. Jónsson, in: Theoretical Methods inCondencsed Phase Chemistry, edited by S.D. Schwartz, volume 5 of Progress in Theoretical Chemistry and Physics, chapter, 10, Kluwer Academic Publishers (2000).[5] R.J. Ong, J.T. Dawley and P.G. Clem: submitted to Journal of MaterialsResearch (2003)[6] P.G. Clem, M. Rodriguez, J.A. Voigt and C.S. Ashley, U.S. Patent 6,231,666.(2001)[7]从这里开始你的论文的标题：请中心使用Helvetica字体（宋体）14全第一Author1，整个第二Author2，B和最后Author31Full地址的第一作者，包括国家第二作者2Full地址，包括国家3List所有不同的地址，以同样的方式aemail，bemail，cemail关键词：列出你的论文中所涉及的关键字。