QS18光电传感器
DATASENSOR 带背景抑制的M18光电传感器 说明书
技术参数 性能曲线工作电压:...............................................10...30 Vdc, reverse polarity protection 功耗:...............................................30 mA max. 发射光:.............................................red LED 660 nm 光斑尺寸:...........................................Ø 10 mm at 100 mm Ø 15 mm at 100 mm (SDS5 radial vers.)背景抑制距离: .....2 ...10 cm ( SDS5 vers.)4 ...12 cm (SDS10 vers.)调整方式:..........................................................multi-turn trimmer指示:.....................................................yellow OUTPUT LEDgreen STABILITY LED (SDS5 vers.)输出类型:..................................................NO-NC PNP or NPN, open collector 饱和电压:.......................................2 V max. (SDS5 PNPvers.)1 V max. (SDS5 NPN vers.)2.4 V max. (SDS10 vers.)输出电流:.............................................100 mA max. (SDS5 vers.)200 mA max. (SDS10 vers.)short-circuit protection反应时间:.............................................2.5ms max. (SDS5 vers.)1 ms max. (SDS10 vers.)开关频率:...................................200 Hz max. (SDS5 vers.)600 Hz max. (SDS10 vers.)工作模式:...........................................light (NO)dark (NC)接线方式:..................................................M12 4-pole connector3 m Ø 5 mm cable (SDS10 vers.)电气保护等级 :....................................class 2外壳防护等级:................................IP67外壳材料:.........................................ABS (SDS5 vers.)nickel-plated brass (SDS10 vers.)镜头材料:...............................................glass重量:..........................................................30 g max. (SDS5 vers.)100 g max. (SDS10 cable vers.)30 g max. (SDS10 connector vers.)工作温度:...............................-25...+55°C 储存温度: ...................................-25 ...+70°C 参照标准:...................................EN 60947-5-2认证证书 :...............................................The operating distances indicate the detection distance with excess gain 2.SDS5-x-MGrey R18%White R90%The detection diagrams indicate the typicaloperating distance with excess gain 1.SDS10-x-MWhite 90%Grey 18%mmNC OUTPUT NO OUTPUT24242424SDS10 尺寸图SDS10-5-M12-35SDS10-5-M12-30AXIALSDS10-5-M12-37SDS10-5-M12-32RADIALOUTPUT LED STABILITY LEDOUTPUT LED STABILITY LED。
施耐德传感器及安全产品介绍课件
光纤设计
XUX
XUD A2
+ 显示
金属/塑料
金属/塑料
塑料 可选继电器输出
塑料 螺钉接线
自学习模式
26
光电传感器－新XUM卖点及目标行业
产品优势
同类产品中检测距离最长：对射式15m，反射式5m，漫反射式1m NO/NC可调 抗光干扰强度高：自然光40,000LUX/白炽灯10,000LUX 节能增效－－同样供电条件下，可使用2倍数量的传感器 防相互干扰：几个传感器可近距离安装同时使用 极具竞争力的价格优势 输出状态指示灯在接收器的前表面，进一步改善安装的统一性 耐环境性能高：－30 到60 ℃的工作温度，防护等级IP67
参数性能。并且注意传感器的输出逻辑形式。
11
XSAV失速保护传感器 性能对比
12
重点产品线XS6*－产品介绍
以最优异的性能满足苛刻的使用要求
➢检测距离:埋入式 2.5-15mm；非埋入式 2.5-22mm;
➢电缆材料:PVR 耐化学腐蚀，耐磨及不宜老化，完全符合阻燃标准 NFC 32-070;
➢电源: DC 10~58V; AC20~264V; ➢输出方式: DC 3线/AC&DC 2线; ➢开关容量:200mA DC;300mA AC;
钢滚轮直动式
XCKJ167H29C WLD2 ZR335-11Z SZL-WL-E TZ5102/TZ5103
直动式
XCKJ10559H29C WLCL Z4V10H335-11Z SZL-WL-C TZ5107
35
限位开关重点产品XCKM－产品介绍
中重载应用
注塑机、纺织机械、印刷机械、物料搬运机械 机床，木工机械，生产线 …
经典型 XCK-J
简述基恩士光电传感器的工作原理,光电传感器的特点及结构
简述基恩士光电传感器的工作原理，光电传感器的特点及结构简述基恩士光电传感器的工作原理，光电传感器的特点及结构基恩士光电传感器是一种利用光学原理来实现物体检测和测距的传感器，其基本原理即利用光的传播和反射来确定物体的位置和状态，适用于很多应用场合，如自动掌控、机器人、制造业、安全检测等。
本文将给大家介绍光电传感器的原理、结构、特点等，希望能对大家有所帮助！一、基恩士光电传感器的工作原理基恩士光电传感器的工作原理基于光电效应和光电二极管的原理。
光电效应是指当光线照射到某些料子表面时，会导致电子从料子表面跃迁到真空或半导体内部，使料子表面产生电荷，从而产生电流或电势差。
而光电二极管是一种利用光电效应产生光电流的半导体器件，其工作原理就是当光线照射到光电二极管时，光子的能量被半导体汲取，使半导体中的电子通过能带跃迁产生光电子，进而形成电流。
在基恩士光电传感器中，一般采纳光电二极管来检测光信号。
光电二极管由一个PN结构构成，其中P型区和N型区之间的界面称为PN结。
当光电二极管存在光照时，光子激发了P型和N型区域的电子，从而产生光生载流子。
然后，由于PN结的特别结构，电子会向N型区域移动，而空穴会向P型区域移动。
移动的电子和空穴在PN结分界处被收集，并向外界形成光电流。
因此，光电传感器的基本工作原理就是将光照射到光电二极管上，通过测量光电二极管产生的光电流来检测光信号的强度。
二、基恩士光电传感器的结构基恩士光电传感器通常由三部分构成，即发送器、接收器和检测电路。
1. 发送器基恩士光电传感器是光电传感器中的一个紧要构成部分，其作用是发出一束光束，用于照射目标物体并产生反射光线。
发送器通常包含一个光源和一个聚光透镜组件。
光源通常是一个电子器件，如发光二极管（LED），激光二极管（LD）和红外线二极管（IR LED）等。
发光二极管是用来发送特别亮的可见光，激光二极管用来发送特别聚焦和照射距离比较远的激光光束，而红外线二极管重要用来发送红外线。
莱纳尔工程公司产品说明书：微型自包含光电传感器安装指南
Install GuideMiniature self-contained photoelectric sensors in universal-mount housingFor complete technical information about this product, including dimensions, accessories, and specifications, see and search 63908.WARNING: Not To Be Used for Personnel ProtectionNever use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.ModelsQD Models:4-pin integral Euro-style QD: add suffix Q8, for example, QS186EQ8.4-pin 150 mm (6 in) Euro-style pigtail QD: add suffix Q5, for example,QS186EQ5.4-pin integral Pico-style pigtail QD: add suffix Q7, for example,QS186EQ7).4-pin 150 mm (6 in) Pico-style pigtail QD: add suffix Q , for example,QS186EQ .W/30 to the model number, for example, QS186E W/30.WORLD-BEAM ® QS18Original Document 63687 Rev. N31 July 201563687Wiringbn (1)bu (3)+−10–30V dcSpecificationsSupply Voltage10 to 30 V dc (10% maximum ripple) at less than 25 mA, exclusive ofload;Protected against reverse polarity and transient voltagesLight SourceGlass Fiber Optic, Opposed and Diffuse mode models: Infrared, 940 nmPlastic Fiber Optic, Retroreflective, Convergent and FF mode models:Visible red, 660 nmAdjustmentsGlass Fiber Optic, Plastic Fiber Optic, Convergent, Diffuse, andRetroreflective mode models (only): Single-turn sensitivity (Gain)adjustment potentiometerIndicators2 LED indicators on sensor top:Green solid: Power onAmber solid: Light sensedGreen flashing: Output overloadedAmber flashing: Marginal excess gain (1 to 1.5x excess gain)Note:Prior to date code 0223, the output indicator was red.Required Overcurrent ProtectionWARNING: Electrical connections must bemade by qualified personnel in accordancewith local and national electrical codes andregulations.Overcurrent protection is required to be provided by end productapplication per the supplied table.Overcurrent protection may be provided with external fusing or viaCurrent Limiting, Class 2 Power Supply.Supply wiring leads < 24 AWG shall not be spliced.For additional product support, go to http://.RepeatabilityOpposed Mode: 100 microsecondsFF Mode: 160 microsecondsAll others: 150 microsecondsOutput ConfigurationSolid-state complementary (SPDT): NPN or PNP (current sinking orsourcing), depending on model;Rating: 100 mA maximum each output at 25 °COff-state Leakage Current (FF Mode): less than 200 μA @ 30V dcOff-state Leakage Current (All others): less than 50 μA @ 30V dcON-state Saturation Voltage: less than 1 V at 10 mA; less than 1.5V at 100 mAProtected against false pulse on power-up and continuous overload orshort circuit of outputsOutput ResponseOpposed Mode: 750 microseconds ON; 375 microseconds OFFFF Mode: 850 microseconds ON/OFFAll others: 600 microseconds ON/OFFNote: 100 millisecond delay on power-up; outputs do not conductduring this timeConstructionABS housing3 mm mounting hardware includedConnections2 m (6.5 ft) 4-wire PVC cable, 9 m (30 ft) 4-wire PVC cable, 4-pin Pico-style or Euro-style QD, 4-pin Pico-style or Euro-style 150 mm (6 in)pigtail QD, depending on modelEnvironmentalIEC IP67; NEMA 6Operating ConditionsTemperature: –20 °C to 70 °C (–4 °F to 158 °F)Relative Humidity: 90% at 50 °C (non-condensing)Certifications—All modelsCertifications—QS18Vx6FFxxx models - Tel: +1-763-544-3164P/N 63687 Rev. NDimensionsAll measurements are listed in millimeters (inches), unless noted otherwise.Model Suffix FP*Model Suffix Q7*Model Suffix Q8*Model Suffix Q(e.g. QS186EQ)*Model Suffix Q5(e.g. QS186EQ5)(e.g. QS186EQ7)(e.g. QS186EQ8)Model Suffix F17.1 mm (0.67")(0.78")(0.12")(0.82")Pico-Style QDEuro-Style QDModel Suffix DB, WModel Suffix EB, RBModel Suffix E, EV, R, FFModel Suffix CV15, CV45, D, LV, LPBanner Engineering Corp Limited WarrantyBanner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacturewhich, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL ORSPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,NEGLIGENCE, OR OTHERWISE.Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. - Tel: +1-763-544-3164。
光电传感器选型指南
光纤式传感器D10光电传感器Q10QS18应用索引建议选用建议选用建议选用建议选用应用索引问题建议选用建议选用EZ-BEAM系列S18传感器建议选用Q45系列传感器Q85系列传感器应用索引建议选用建议选用建议选用建议选用应用索引建议选用建议选用QC50系列颜色识别传感器建议选用R55系列色标传感器应用索引建议选用PBP46UC建议选用建议选用问题建议选用48型号说明（以QS18VN6FPQ 为例）Q S 18产品型号产品型号：D10=10mm 宽，标准35mm DIN 轨道安装D11=11mm 宽，标准35mm DIN 轨道安装D12=12mm 宽，标准35mm DIN 轨道安装FI22=扁平式塑料光纤放大器VS1=小型自含传感器（聚焦式）VS2=小型自含传感器（对射，聚焦式）VS3=小型自含传感器（对射，反射板式）VS4=小型自含传感器（对射式）T08=8mm 螺纹T 型Q10=小型自含式直流光电传感器Q14=14mm 直角型传感器QS12=MINI-BEAM2®12mm 螺纹小型光电传感器Q23=23mm 直角型传感器Q23H =水平式23mm 直角型传感器QS18=小型自含式光电传感器，具有多种安装方式，带18mm 安装螺纹外壳QS18E =小型自含式专家型光电传感器，具有多种安装方式，带18mm 安装螺纹外壳QS30=有激光直反式、区域式、反射板式，带30mm 安装螺纹外壳SM312=MINI-BEAM 系列传感器，具有普通型和专家型及各种检测方式S12=12mm 螺纹圆柱型光电开关S18=18mm 螺纹圆柱型光电开关M18=18mm 螺纹金属圆柱型光电开关S30=30mm 螺纹圆柱型光电开关Q25=25mm 宽，带安装螺母18mm 螺纹Q40=40mm 宽，带安装螺母30mm 螺纹T18=18mm 螺纹T 型TM18=18mm 螺纹金属T 型光电开关T30=30mm 螺纹T 型SM30=30mm 螺纹圆柱型增强密封型光电开关QM42 & QMT42= 金属外壳自含式直流光电传感器PD45=聚焦式高精度激光传感器Q50=光电位移传感器Q60=可调区域式光电传感器60x75mm Q85=端子输出形式，直角型85x65mm R55=色标传感器SL30=30mm 宽，槽型传感器SL10=10mm 宽，槽型传感器SLC1=标签检测传感器，带自适应数字逻辑电路M12=激光发射器1、2级QC50=真彩颜色传感器QL50, QL55= 荧光传感器OTB =光电按钮LTB =锁定功能光电按钮STB =自检功能光电按钮VTB =工序校验光电按钮V N输出特性：A =亮态操作或常开B =可选（常开或常闭）DA =动态输出（AC 耦合，常开）DR =动态输出（AC 耦合，常闭）F =预留I =隔离型互补输出（常开加常闭）L =模拟量输出R =暗态操作或常闭S =可选输出（互补输出或常开加报警输出）T =可选输出（互补输出或常闭加报警输出）V =互补输出（常开加常闭）X =适用总线加（两位定义总线类型和模式）Z=Z 形式输出（1常开+1常闭，独立）输出形式：B =双极性（1NPN & 1PNP 输出）D =2线直流（晶体管输出）I =模拟量电流输出IU =模拟量电流电压输出M =NPN/PNP 可选输出N =NPN 晶体管输出P =PNP 晶体管输出R =继电器输出（机电触点）U =模拟量电压输出W =3线交流W1=4线交流（晶闸管输出）W2=3线交流短路保护W3=4线交流（互补固态输出）Z=2线交流（晶闸管输出）49 •Email: sensors@6F P Q后缀：A =自动修正B =公制管螺纹C1=600V 交流电缆H =高增益（不改变响应时间）MK =kodak 定制（940nm 发射器）Q =接插件式QP =电缆接插式S =慢速响应时间T =延时功能W/..=加长电缆Y =高速响应Y1=高速响应/脉宽延时Y2=高速响应/脉宽延时（暗态操作）MHS =高速型供电电压范围：1=90 ~ 130V ac 2=90 ~ 250V ac 21=90 ~ 240V ac 23=22 ~ 36V ac3=20 ~ 250V ac 或12 ~ 250V dc + 24 ~ 250V ac（“通用电压型”）30=预留31=20 ~ 250V ac + 22 ~ 36V dc 4=预留40=预留6=10 ~ 30V dc 62=10 ~ 48V dc 63=12 ~ 24V dc 64=15 ~ 24V dc 65=24V dc ±10%7=10 ~ 30V dc TTL 兼容72=5V dc ±10%, TTL 兼容8=预留81=20 ~ 30V ac/dc 9=NAMUR, V dc检测模式：C =聚焦式（红外光）W =宽角度直反式CB =聚焦式（蓝光）E =发射器CW =聚焦式（白光）EB =发射器（镜头齐平）CG =聚焦式（绿光）EF =发射器光纤式CV =聚焦式（可见红光）EK =发射器带同步线CVB =聚焦式（可见蓝光）EL =发射器（长距离）CVW =聚焦式（可见白光）ELD =发射器（激光器）CVG =聚焦式（可见绿光）EX =发射器（高能量）F =光纤式（红外光，玻璃光纤）R =接收器FP =光纤式（可见红光，塑料光纤）RB =接收器（镜头齐平）FV =光纤式（可见红光，玻璃光纤）RF =接收器光纤式FVB =光纤式（蓝光，玻璃光纤）RK =接收器带同步线FVW =光纤式（白光，玻璃光纤）RL =接收器（长距离）FVG =光纤式（绿光，玻璃光纤）RX =接收器（高能量）FPB =光纤式（蓝光，塑料光纤）FF =固定区域式FPW =光纤式（白光，塑料光纤）AF =可调区域式FPG =光纤式（绿光，塑料光纤）LAF =激光固定区域式D =直反式（短距离）L =反射板式（红外光）DL =直反式（长距离）LV =反射板式（可见红光）DB =直反式（镜头齐平）LP =反射板式（偏振光）DBZ =直反式（镜头齐平）LPC =反射板式（偏振光,透明物体检测）DX =直反式（高能型）LL =反射板式（激光）LD =激光直反式LLP =反射板式（激光偏振）LDL =激光直反式（长距离）LLPC =反射板式（激光偏振，低对比度）。
18KW级光电传感器系列用户指南说明书
Photoelectric SensorsTubular2.30Combination 18 mm threaded90º opticsBOS 18KW-PA-1XA-S4-C BOS 18KW-NA-1XA-S4-C BOS 18KW-PA-1N1R-S4-C BOS 18KW-NA-1N1R-S4-C BOS 18KW-PA-1QC-S4-C BOS 18KW-NA-1QC-S4-CBOS 18KW-PA-1TB-S4-C BOS 18KW-NA-1TB-S4-C BLE 18KW-PA-1PP-S4-C BLE 18KW-NA-1PP-S4-C BLS 18KW-XX-1P-S4-LCombination 18 mm threaded90º opticsBOS 18KW-PA-1PD-C-02BOS 18KW-NA-1PD-C-02BOS 18KW-PA-1XA-C-02BOS 18KW-NA-1XA-C-02BOS 18KW-PA-1N1R-C-02BOS 18KW-NA-1N1R-C-02BOS 18KW-PA-1QC-C-02BOS 18KW-NA-1QC-C-02BOS 18KW-PA-1TB-C-02BOS 18KW-NA-1TB-C-02BLE 18KW-PA-1PP-C-02BLE 18KW-NA-1PP-C-02BLS 18KW-XX-1P-L-02Body Style TypeLong Range Diffuse (L 1)PNP NO+NC Light-on 400 mm 270° Pot.NPN NO+NC Light-on 400 mm 270° Pot.Short Range Diffuse (L 2)PNP NO+NC Light-on 80 mm NPN NO+NC Light-on 80 mm Fixed Focus (L 2)PNP NO+NC Light-on 80 mm NPN NO+NC Light-on 80 mm Polarized Retroreflective (L 1)PNP NO+NC Dark-on 3 m 270° Pot.NPN NO+NC Dark-on 3 m 270° Pot.Transparent Detection Retroreflective (L 1)PNP NO+NC Dark-on 1.7 m 270° Pot.NPN NO+NC Dark-on 1.7 m 270° Pot.Thru-beam (L 1)PNP NO+NC Dark-on 10 m Receiver 270° Pot.NPN NO+NC Dark-on 10 m Receiver 270° Pot.Emitter (L 2)Supply Voltage RippleVoltage Drop U d at I eRated Output Current I eCurrent Consumption I O (No Load)Utilization Category (IEC 60-947-4-1) Output Duty Cycle Emitter Light SourceLight Spot DiameterAmbient Light Immunity (EN 60947-5-2)Power Indicator Output IndicatorStability/Error Indicator Switching Frequency fResponse Time (On/Off Delay)OperatingT emperature Range Electrical Shock ProtectionDegree of Protection per IEC 60529Short Circuit Protection Overload Protection Housing MaterialSensing Face Material Emitter Life ConnectionLong Range Diffuse Short Range Diffuse Fixed Focus Polarized Transparent Thru-beam10…30 Vdc < 10%< 2 V 100 mA < 30 mA DC 13Visible Red 630 nm Fixed Focus/Infrared 880 nm Diffuse35 mm @ 400 mm 55 mm @ 100 mm 25 mm @ 80 mm 60 mm @ 2 m 60 mm @ 1 m 470 mm @ 10 m5000 LuxGreen LED (Emitter Only)Yellow LED (Except Emitter)Green/Red LED250 Hz Thru-beam, 1 kHz Diffuse/Fixed Focus/Retroreflective < 2 ms Thru-beam, < 0.5 ms Diffuse/Fixed Focus/Retroreflective-25°C to +55°CClass 2IP 67Yes Yes PBT PMMAAverage 100,000 hr with Ta=+25°CM12 4-pin connector Cable 2 m, PVC, 4 x 26 AWG BOS 18KWqN wN qO wO qP wP qQ wQ qR wR qS wS eSC o u r t e s y o f C M A /F l o d y n e /H y d r a d y n e ▪ M o t i o n C o n t r o l ▪ H y d r a u l i c ▪ P n e u m a t i c ▪ E l e c t r i c a l ▪ M e c h a n i c a l ▪ (800) 426-5480 ▪ w w w .c m a f h .c o mTubularBody StyleTypeBackground Suppression (BGS)PNP NO+NC Light-on 50...100 mm T each-inNPN NO+NC Light-on 50...100 mm Teach-inSupply VoltageRippleVoltage Drop U d at I eRated Output Current I eCurrent Consumption I O (No Load)Utilization Category (IEC 60-947-4-1) Output Duty Cycle Emitter Light SourceLight Spot DiameterAmbient Light Immunity (EN 60947-5-2)Output IndicatorStability/Error IndicatorSwitching Frequency fResponse Time (On/Off Delay)Operating Temperature RangeElectrical Shock ProtectionDegree of Protection per IEC 60529Short Circuit ProtectionOverload ProtectionHousing MaterialSensing Face MaterialEmitter LifeConnectionRecommended ConnectorWeightqMwMq = Number indicates wiring diagramA = Letter indicates detection diagramSee pages 2.34-2.35 for diagramsCourtesyofCMA/Flodyne/Hydradyne▪MotionControl▪Hydraulic▪Pneumatic▪Electrical▪Mechanical▪(8)426-548▪www.cmafh.co m。
QS18光电传感器
Pico型电缆接插件式
QS18型检测模式
对射式
反射板式
聚焦式
直接反射式
可调区域式
玻璃和塑料光纤式
上海：021-6427 1933 • 天津：022-2304 6751 • 广州：020-3874 2606
QS18 系 列
WORLD-BEAMTM 传感器系列 —— QS18系列传感器
100 mm 4.0 in
DISTANCE
1000 mm 40.0 in
30 mm 20 mm 10 mm
0 10 mm 20 mm 30 mm
QS18...W
Divergent Diffuse Mode
1.2 in 0.8 in 0.4 in 0 0.4 in 0.8 in 1.2 in
0 20 mm 40 mm 60 mm 80 mm 100 mm 0.8 in 1.6 in 2.4 in 3.2 in 4.0 in
检测距离
450mm (18")
电缆形式* 2m（6.5'） 4针Pico电缆接插件 2m（6.5'） 4针Pico电缆接插件
供电电压 输出形式
NPN 10 ~ 30V dc
PNP
过量增益
光形图
产品性能由90%反射率的白色测试板标定
1000
E X C E 100 S S
G 10 A I N
1 1 mm 0.04 in
0 100 mm 200 mm 300 mm 400mm 500 mm 4.0 in 8.0 in 12.0 in 16.0 in 20.0 in
DISTANCE
2m（6.5'） NPN
Banner Engineering QS30系列光电传感器说明书
DatasheetTo view or download the latest technical information about this product, including specifications,dimensions, accessories, and wiring, see . Search for Instruction Manual p/n 119165.WARNING: Not To Be Used for Personnel ProtectionNever use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.ModelsWiring Diagrams–++10–30 V dc –2.White3.Blue4.Black5.GrayCabled wiring diagrams are shown. Quick disconnect (QD) wiring diagrams are functionally identical.suffix “W/30” to the model number (for example, QS30E W/30).•To order the 5-pin integral M12/Euro-style quick disconnect (QD), add suffix “Q” (for example, QS30EQ).2Polarized Retroreflective and Retroreflective ranges are specified using a model BRT-84 retroreflector.WORLD-BEAM ® QS30 Series Sensor (DC Voltage)Original Document 119167 Rev. C20 February 2018119167SpecificationsSupply Voltage10 V dc to 30 V dc (10% max. ripple) at less than 40 mA, exclusive of loadProtected against reverse polarity and transient voltagesOutput ResponseOpposed Mode: 5 milliseconds ON and OFFAll others: 2 millisecondsNOTE: 100 millisecond delay on power-up; outputs do not conduct during this time RepeatabilityOpposed Mode: not applicableAll others: 500 microseconds Cutoff Point ToleranceFixed-Field only: ± 5% of nominal cutoff distanceConstruction and MountingABS housing, rated IEC IP67; NEMA 6; Acrylic lens cover3 mm mounting hardware includedConnections2 m (6.5 ft) unterminated 5-wire PVC cable; 9 m (30 ft) unterminated 5-wire PVCcable ; or Integral 5-pin M12/Euro-style male quick disconnect (QD) Application Tip for the QS30LV ModelFor best sensing reliability, targets should be a minimum of 0.5m from the sensorOutput ConfigurationBipolar: One current sourcing and one current sinkingRating: 100 mA maximum each output at 25 °COff-state leakage current:NPN: less than 200 μAPNP: less than 10 μAON-state saturation voltage:NPN: less than 1.6 V at 100 mAPNP: less than 2.0 V at 100 mAProtected against false pulse on power-up and continuous overload or short circuit of outputs AdjustmentsSelectable Light/Dark Operate is achieved via the gray wire.Opposed, Retroreflective, and Polarized Retroreflective models: Light Operate - Low (0 to 3 V)*Dark Operate - High (open or 5 to 30 V)*Diffuse and Fixed-Field models:Light Operate - High (open or 5 to 30 V)*Dark Operate - Low (0 to 3 V)*Diffuse, Retroreflective, and Polarized Retroreflective mode models (only): Single-turn Sensitivity (Gain) adjustment potentiometer * Input impedance 10 kΩIndicators2 LEDs on sensor top:Large oval LED on sensor back (except emitters): Yellow on indicates the output is conducting Operating Conditions–20 °C to +70 °C (–4 °F to +158 °F)95% at +50 °C maximum relative humidity (non-condensing)Vibration and Mechanical ShockAll models meet Mil Std. 202F requirements. Method 201A (vibration: 10 Hz to 60 Hz max., double amplitude 0.06 inch, maximum acceleration 10G). Also meets IEC947-5-2 requirements: 30G 11 ms duration, half sine wave.CertificationsPendingDimensions2 x ø3.3 mm (0.125")max. torque0.7 Nm (6 in lbs)M30 x 1.5 Threadmax. torque6 Nm (53 in lbs)with included 30 mmmounting nutYellow LEDOutputIndicatorYellow and Green LEDsCabled Models QD ModelsAll measurements are listed in millimeters [inches], unless noted otherwise.Banner Engineering Corp. Limited WarrantyBanner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: .WORLD-BEAM® QS30 Series Sensor (DC Voltage)© Banner Engineering Corp. All rights reserved。
美国邦纳选型指南（2012-2013）说明书
2012 - 2013 Specifier's Guide美国邦纳选型指南｜PLC&HMI ｜光电传感器｜工业安全产品｜机器视觉｜测量检测传感器｜｜工业无线网络产品｜工业智能指示灯｜旋转编码器｜激光读码器｜年风雨历练 版图跨越全球美国邦纳工程国际有限公司，始建于1966年，历经近45年的风雨历练，已成为当今世界最大的工业控制器( PLC & HMI )、变频器、光电传感器、测量检测、安全产品、工业无线网络产品、机器视觉、工业智能指示灯和旋转编码器的专业制造商之一，在世界主要地区均设有世界一流的生产、销售及服务机构。
丰富的产品选择、迅速的交货期、强大的技术支持、同行业最强大的研发能力，所有这一切都确保了美国邦纳在光电领域中领先者的地位。
美国邦纳致力于为客户提供以传感为核心的综合自动化解决方案，以“创新和服务”为企业使命的美国邦纳工程公司，正凭借着世界一流的精英团队、贴心服务、优质产品、先进技术及战略性的眼光，为邦纳的新世纪版图拓展写就华彩篇章，为更多企业的发展壮大提供领先、可靠的控制和检测解决方案。
46传感器市场领导者为您的企业保驾护航过去的15年，在由第三方组织的工程师购买意向调查中，邦纳公司连续50次位于第一位。
而且“财富500强”的大多数公司的传感器也是选用的邦纳公司的产品，他们依靠着邦纳的产品顺利实现了可靠的自动化解决方案。
汽车、家电药品、食品……无论您的企业属于哪个行业，邦纳都有先进的技术、可靠的产品，帮助您实现企业生产的自动化，提高产品的生产效率和质量，为您的企业发展保驾护航。
丰富的产品线，值得您应需选择邦纳拥有超过15,000多种产品，拥有同行业内最完整的产品线，生产包括光电及超声波传感器，视觉传感器、机床安全产品、测量与检测传感器，并且可以为客户各种应用提供解决方案。
我们每天发运数千件产品，平均每3.5秒就有一个邦纳的产品被安装使用！无论您想检测或测量何种部件或材料，邦纳都可以为您提供合适的产品和解决方案。
邦纳QS18光电传感器
Cable, QD or 150 mm pigtail QDKabel, Steckverbinder oder Steckverbinder mit 150 mm-Anschlusslitzecavo, connettore o connettore volante con 150 mm di cavoCâble, connecteur ou connecteur déporté à 150 mmCable, QD, o cable con QD de 150 mmDescription BeschreibungDescrizioneDescriptionDescripciónQD models:* • 4-pin integral Euro-style QD: add suffix “Q8” (e.g., QS186EQ8). • 4-pin Euro-style 150 mm (6") pigtail: add suffix “Q5” (e.g., QS186EQ5). • 4-pin integral Pico-style QD: add suffix “Q7” (e.g., QS186EQ7). • 4-pin Pico-style 150 mm (6") pigtail: add suffix “Q ” (e.g., QS186EQ ).IMPORTANT SAFETY WARNING !The sensors described in this data sheet do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can result in either an energised or de-energised output condition. Never use these products as sensing devices for personnel safety.WARNUNG,BITTE BEACHTEN !Die in diesem Beipackzettel beschriebenen Sensoren dürfen nicht für Personenschutz-Einrichtungen eingesetzt werden. Sie verfügen weder über die dafür notwendigen redundanten Sicherheitskomponenten, noch liegen für sie die notwendigen gesetzlich vorgeschriebenen Zulassungen vor.IMPORTANTEAVVISO DI SICUREZZA !I sensori descritti in questo data sheet NON contengono i circuiti di auto-diagnosi ridondante necessari per consentire il loro uso in applicazioniantinfortunistiche. Il mancato o difettoso funzionamento di un sensore può verificarsi sia in presenza che in assenza di corrente. Non usare mai questi prodotti come sensori di protezione di sicurezza. ATTENTION !Les détecteurs décrits dans le présent document ne disposent pas de dispositifs nécessaires pour pouvoir être utilisés dans des applications de protection de personnes. Une panne du détecteur peut commuter ou non la sortie. Ces appareils ne doivent jamais être utilisés comme détecteurs deprotection de personnes.ADVERTENCIA !Estos sensores fotoeléctricos de presencia NO incluyen los circuitos redundantes de autocomprobación necesarios para usarlos en situaciones quecomprometan la seguridad de las personas. El fallo o mal funcionamiento de un sensor puede hacer que sus bornes de salida queden en condición tantoactiva como inactiva.QS18VP6 . . .QS18VN6 . . .QS186E . . .-+-+bn (1)-+bu (3)10-30V dcMQDC-4 . . .(RA)SpecificationCharakteristikenSpecificheCaractéristiquesCaracterísticasSupply Voltage Betriebsspannung Tensione di alimentazione Tension d’alimentation Tensión de alimentación 10...30 VDC Load Current (max.)Bemessungsbetriebsstrom Corrente a carico continuo Courant de charge Corriente de carga continua 100 mA Circuit Protection Schutzschaltungen Protezione Protection Protección A + B*Enclosure Rating SchutzartClasse di protezione Indice de protection Tipo de protección IP 67; UL Type 1Temperature Rating Zul. Umgebungstemperatur Temperatura di funzionamento Température ambiante admis-sibleIntervalo de temperatura -20...+70 °C*Reverse polarity (A)*Short-circuit (B)*Verpolschutz (A)*Kurzschlussschutz (B)*Inversione di polarità (A)*Cortocicuito (B)*Inversion de polarité (A)*Courts-circuits (B)*Inversión de polaridad (A)*Cortocircuitos (B)Packing ListLieferumfangContenuto della confezioneLivraisonAlbaránSensor Sensor Sensore Détecteur SensorData sheet Datenblatt Data sheetNotice technique Hoja de características M18 nut M18 x 1-Schraube Dado di fissaggio M18 x 1Ecrou M18 x 1Tuerca M18 x 1M3 hardwareM3-HardwareAccessori di fissaggio M3Kit de vis M3Tornillos M3。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
100 mm 4.0 in
DISTANCE
1000 mm 40.0 in
30 mm 20 mm 10 mm
0 10 mm 20 mm 30 mm
QS18...W
Divergent Diffuse Mode
1.2 in 0.8 in 0.4 in 0 0.4 in 0.8 in 1.2 in
0 20 mm 40 mm 60 mm 80 mm 100 mm 0.8 in 1.6 in 2.4 in 3.2 in 4.0 in
1 1 mm 0.04 in
QS18...CV15 Convergent Mode
10 mm 0.4 in
100 mm 4.0 in
DISTANCE
1000 mm 40.0 in
6 mm 4 mm 2 mm
0 2 mm 4 mm 6 mm
QS18...CV15 Convergent Mode
.24 in .16 in .08 in 0 .08 in .16 in .24 in
DISTANCE
QS18VN6LP QS18VN6LPQ QS18VP6LP QS18VP6LPQ
带偏振反射板式
2m（6.5'）
NPN
3.5m 4针Pico电缆接插件
10 ~ 30V dc
(12')
2m（6.5'）
PNP
4针Pico电缆接插件
1000
E X C E 100 S S
G 10 A I N
1 0.01 m 0.03 ft
QS18...LP Retroreflective Mode
with BRT-84 Reflector
0.1 m 0.33 ft
1m 3.3 ft
10 m 33 ft
DISTANCE
30 mm 20 mm 10 mm
0 10 mm 20 mm 30 mm
QS18...LP
0 100 mm 200 mm 300 mm 400mm 500 mm 4.0 in 8.0 in 12.0 in 16.0 in 20.0 in
DISTANCE
2m（6.5'） NPN
4针Pico电缆接插件 10 ~ 30V dc
2m（6.5'） PNP
4针Pico电缆接插件
1000
E X C E 100 S S
3m (10')
电缆形式* 2m（6.5'） 4针Pico电缆接插件 2m（6.5'） 4针Pico电缆接插件 2m（6.5'） 4针Pico电缆接插件 2m（6.5'） 4针Pico电缆接插件 2m（6.5'） 4针Pico电缆接插件 2m（6.5'） 4针Pico电缆接插件
供电电压 输出形式 N/A
Retroreflective Mode with BRT-84 Reflector
1.2 in 0.8 in 0.4 in 0 0.4 in 0.8 in 1.2 in
0 .75 m 1.5 m 2.25 m 3.0 m 3.75 m 2.5 ft 5 ft 7.5 ft 10 ft 12.5 ft
NPN
PNP 10 ~ 30V dc
N/A
NPN
PNP
过量增益
1000
E X C E 100 S S
G 10 A I N
1 0.1 m 0.3 ft
QS186E and QS18...R
Opposed Mode
1m 3.3 ft
10 m 33 ft
DISTANCE
100 m 330 ft
光形图
有效光束：13mm(0.5")
QS18系列对射式发射器(E)和接收器(R)
红外光，940nm
型号 QS186E QS186EQ QS18VN6R QS18VN6RQ QS18VP6R QS18VP6RQ QS186EB QS186EBQ QS18VN6RB QS18VN6RBQ QS18VP6RB QS18VP6RBQ
检测距离
20m (66')
G 10 A I N
1 1 mm 0.04 in
QS18...DB Diffuse Mode
10 mm 0.4 in
100 mm 4.0 in
DISTANCE
1000 mm 40.0 in
30 mm 20 mm 10 mm
0 10 mm 20 mm 30 mm
QS18...DB Diffuse Mode
WORLD-BEAMTM 传感器系列 —— QS18系列传感器
QS18 Series
QS18系列聚焦式
可见红光，660nm
型号
检测距离
QS18VN6CV15
QS18VN6CV15Q QS18VP6CV15
16mm (21")
QS18VP6CV15Q
QS18VN6CV45
QS18VN6CV45Q QS18VP6CV45
18 in
Opposed Mode
300 mm
12 in
150 mm
6 in
0
0
150 mm
6 in
300 mm
12 in
450 mm
18 in
0 .75 m 1.5 m 2.25 m 3.0 m 3.75 m 2.5 ft 5 ft 7.5 ft 10 ft 12.5 ft
DISTANCE
注：QS18传感器（型号后缀为AF100除外）具有如下各种接插件形式 型号后缀为Q5：4针电缆式Euro QD；型号后缀为Q7：4针Pico QD；及型号后缀为Q8：4针Euro QD。 QD接插件式产品需另配接插电缆。
0 10 mm 20 mm 30 mm 40 mm 50 mm 0.4 in 0.8 in 1.2 in 1.6 in 2.0 in
DISTANCE
2m（6.5'） NPN
4针Pico电缆接插件 10 ~ 30V dc
2m（6.5'） PNP
4针Pico电缆接插件
1000
E X C E 100 S S
QS18传感器
－小型自含式光电传感器
• 几乎适于任何形式的安装 • 具有超强的性能，可与外形更大的Mini型
或圆柱形传感器媲美 • 10 ~ 30V dc供电，互补型（SPDT）NPN或
PNP输出 • 清晰的LED，可在各个角度观察传感器工作
状态 • 坚固的密封外壳，保护内部电路 • 可选带18mm螺纹外壳或方形外壳 • 所有型号响应时间均小于1ms，具有较高的
DISTANCE
注：反射板式检测距离由反射板BRT-84（3"直径）标定，实际检测距离根据反射板的尺寸及反射率 的不同而有所不同
• Email: sensors@
159 美国邦纳工程国际有限公司
750 mm QS186E and QS18...R
30 in
Opposed Mode
500 mm
20 in
250 mm
10 in
0
0
250 mm
10 in
500 mm
20 in
750 mm
30 in
0
4 m 8 m 12 m 16 m 20 m
12 ft 26 ft 40 ft 52 ft 66 ft
宽光束直接反射式
2m（6.5'）
NPN
100mm (4")
4针Pico电缆接插件
10 ~ 30V dc 2m（6.5'）
PNP
4针Pico电缆接插件
1000
E X C E 100 S S
G 10 A I N
1 1 mm 0.04 in
QS18...W
Divergent Diffuse Mode
10 mm 0.4 in
.24 in .16 in .08 in 0 .08 in .16 in .24 in
0 15 mm 30 mm 45 mm 60 mm 75 mm 0.6 in 1.2 in 1.8 in 2.4 in 3.0 in
DISTANCE
QS18系列直接反射式
红外光，940nm
型号 QS18VN6D QS18VN6DQ QS18VP6D QS18VP6DQ QS18VN6DB QS18VN6DBQ QS18VP6DB QS18VP6DBQ
DISTANCE
1000
E X C E 100 S S
G 10 A I N
1 0.01 m 0.03 ft
QS186EB and QS18...RB
Opposed Mode
0.1 m 0.33 ft
1m 3.3 ft
10 m 33 ft
DISTANCE
450 mm QS186EB and QS18...RB
QS18 系 列
WORLD-BEAMTM 传感器系列 —— QS18系列传感器
QS18系列可调区域式
可见红光，660nm
型号
检测距离
QS18VN6AF100
1mm (0.04") QS18VN6AF100Q 到关断点
QS18VP6AF100
（关断点 可调，范 围在20 ~ 100mm）
QS18系列反射板式
P
LV: 可见红光 ,660nm LP: 可见红光 ,660nm
型号
检测距离
电缆形式*
供电电压 输出形式
过量增益
光形图
QS18VN6LV QS18VN6LVQ QS18VP6LV QS18VP6LVQ
反射板式
2m（6.5'）
NPN