管件和垫片中英文对照
管材管件阀门接头管道特件紧固件密封等中英文对照完整版
管材管件阀门接头管道特件紧固件密封等中英文对照集团标准化办公室：[VV986T-J682P28-JP266L8-68PNN]管材、管件、阀门、接头、管道特件、紧固件、垫片、密封、工程材料等中英文对照化工管道设计技术英语词汇(1－2－3)1管道组成件Pipingcomponent1.1管子Pipe管子(按照配管标准规格制造的)pipe管子(不按配管标准规格制造的其他用管)tube钢管steelpipe铸铁管castironpipe衬里管linedpipe复合管cladpipe碳钢管carbonsteelpipe合金钢管alloysteelpipe不锈钢stainlesssteelpipe奥氏体不锈钢管austeniticstainlesssteelpipe铁合金钢管ferriticalloysteelpipe轧制钢管wrought-steelpipe锻铁管wrought-ironpipe无缝钢管seamless(SMLS)steelpipe焊接钢管weldedsteelpipe电阻焊钢管electric-resistanceweldedsteelpipe电熔（弧）焊钢板卷管electric-fusion(arc)-weldedsteel-platepipe螺旋焊接钢管spiralweldedsteelpipe镀锌钢管galvanizedsteelpipe热轧无缝钢管hot-rollingseamlesspipe冷拔无缝钢管cold-drawingseamlesspipe水煤气钢管water-gassteelpipe塑料管plasticpipe玻璃管glasstube橡胶管rubbertube直管runpipe;straightpipe1.2管件Fitting弯头elbow异径弯头reducingelbow带支座弯头baseelbowk半径弯头longradiuselbow短半径弯头shortradiuselbow 长半径180°弯头longradiusreturn短半径180°弯头shortradiusreturn带侧向口的弯头（右向或左向）sideoutletelbow(righthandorlefthand)双支管弯头（形）doublebranchelbow三通tee异径三通reducingtee等径三通straighttee带侧向口的三通（右向或左向）sideoutlettee(righthandor1efthand)异径三通（分支口为异径）reducingtee(reducingonoutlet)异径三通（一个直通口为异径）reducingtee(reducingononerun)带支座三通basetee异径三通（一个直通口及分支口为异径）reducingtee(reducingononerunandoutlet)异径三通（两个直通口为异径，双头式）reducingtee(reducingonbothruns,bullhead)45°斜三通45°lateral45°斜三通（支管为异径）45°lateral(reducingonbranch)45°斜三通(一个直通口为异径)45°lateral(reducingononerun)45°斜三通(一个直通口及支管为异径)45°lateral(reducingononerunandbranch)Y型三通（俗称裤衩）true“Y”四通cross等径四通straightcross异径四通reducingcross异径四通（一个分支口为异径）reducingcross(reducingononeoutlet)异径四通（一个直通口及分支口为异径）reducingcross(reducingononerunandoutlet)异径四通（两个分支口为异径）reducingcross(reducingonbothoutlet)异径四通（一个直通口及两个分支口为异径）reducingcross(reducingononerunandbothoutlet)异径管reducer同心异径管concentricreducer偏心异径管eccentricreducer锻制异径管reducingswage螺纹支管台threadolet焊接支管台weldolet承插支管台sockolet弯头支管台elbolet斜接支管台latrolet 镶入式支管嘴sweepolet短管支管台nipolet支管台，插入式支管台boss管接头coupling,fullcoupling半管接头halfcoupling异径管接头reducingcoupling活接头union内外螺纹缩接（俗称补芯）bushing管帽cap(C)堵头plug短节nipple异径短节reducingnipple;swagenipple1.3弯管Bend预制弯管fabricatedpipebend跨越弯管（^形）cross-overbend偏置弯管（~形）offsetbend90°弯管quarterbend环形弯管cirelebend单侧偏置90°弯管（形）singleoffsetquarterbendS形弯管“S”bend单侧偏置U形膨胀弯管（|形）singleoffset“U”bendU形弯管“U”bend双偏置U膨胀弯管doubleoffsetexpansion“U”bend 斜接弯管mitrebend三节斜接弯管3-piecemitrebend折皱弯管corrugatedbend圆度roundness1.4法兰Flange(FLG）整体管法兰integralpipeflange钢管法兰steelpipeflange螺纹法兰threadedflange滑套法兰（包括平焊法兰）slip-onflange(SO);slip-onweldingflange 承插焊法兰socketweldingflange松套法兰lapjointflange(LJF)对焊法兰weldingneckflange(WNF)法兰盖blindflange,blind孔板法兰orificeflange异径法兰reducingflange盘座式法兰padtypeflange松套带颈法兰loosehubbedflange焊接板式法兰weldingplateflange对焊环weldingneckcollar（与stubend相似）平焊环welding-oncollar突缘短节stubend,lap翻边端lappedpipeend松套板式法兰looseplateflange压力级pressurerating,pressureratingclass压力—温度等级pressure-temperaturerating法兰密封面，法兰面flangefacing突面raisedface(RF)凸面maleface(MF)凹面femaleface(FMF)榫面tongueface槽面grooveface环连接面ringjointface全平面；满平面flatface;fullface(FF)光滑突面smoothraisedface(SRF)法兰面加工facingfinish粗糙度roughness光滑的smooth齿形serrated均方根rootmeansquare(RMS)算术平均粗糙高度arithmeticalaverageroughnessheight(AARH)配对法兰companion-flange螺栓圆boltcircle(B.C.)1.5垫片Gasket(GSKT)垫片的型式typeofgasket平垫片flatgasket环形平垫片flatringgasket平金属垫片flatmetalgasket夹棉织物的橡胶elastomerwithcottonfabricinsertion夹石棉织物的橡胶elastomerwithasbestosfabricinsertion夹石棉织物及金属丝加强的橡胶elastomerwithasbestosfabricinsertionandwithwirereinforcement无石墨压缩白石棉垫片nongraphitedcompressedwhiteasbestosgasket天然白橡胶垫片naturalwhiterubbergasket压缩石棉垫片compressedasbestosclassgasket浸聚四氟乙烯的石棉垫片PTFEimpregnatedasbestosgasket夹石棉的缠绕金属垫片spiral-woundmetalgasketwithasbestosfiller内环innerring外环，外定位环outerring波纹金属垫片corrugatedmetalgasket波纹金属包嵌石棉垫片corrugatedmetalgasketwithasbestosinserted 双夹套波纹金属包石棉垫片corrugatedmetaldoublejacketedasbestosfilledgasket双夹套垫片doublejacketedgasket金属包石棉平垫片flatmetaljacketedasbestosfilledgasket整体金属齿形垫片solidmetalserratedgasket槽形金属垫片groovedmetalgasket环形连接金属垫片ringjointmetalgasket八角环形垫片octagonalringgasket椭圆环形垫片ovalringgasket透镜式垫片lensgasket非金属垫片non-metallicgasket1.6阀门Valve1.6.1阀门结构、零件阀轭yoke外螺纹阀杆及阀轭outsidescrewandyoke(OS&Y)阀杆stem内螺纹insidescrew(IS)阀轭套yokesleeve阀杆环stemring阀座valveseat(bodyseat)阀座环、密封圈seatring整体（阀）座integralseat堆焊（阀）座depositedseat阀芯（包括密封圈、杆等内件）trim阀盘disc阀盘密封圈discseat阀体body阀盖bonnet阀盖衬套bonnetbush螺纹阀帽screwcap螺纹阀盖screwbonnet螺栓连接的阀盖boltedbonnet(BB)活接阀盖（帽）unionbonnet(cap)螺栓连接的阀帽boltedcap(BC)焊接阀盖weldedbonnet(WB)本体阀杆密封bodystemseal石棉安全密封asbestosemenenseal倒密封backseal压力密封的阀盖pressure-tightbonnet动力操纵器poweredoperator电动操纵器electricmotoroperator气动操纵器pneumaticoperator液压操纵器hydraulicoperator快速操纵器quick-actingoperator滑动阀杆slidingstem正齿轮传动spurgearoperated伞齿轮传动bevelgearoperated扳手操作wrenchoperated链轮chainwheel手轮handwheel手柄handlever(handle)气缸（或液压缸）操纵的cylinderoperated链条操纵的chainoperated等径孔道fullbore;fullport异径孔道reducingbore,reducedport,venturiport 短型shortpattern紧凑型（小型）compacttype笼式环lanternring压盖gland阀杆填料stempacking阀盖垫片bonnetgasket升杆式（明杆）risingstem(RS)非升杆式（暗杆）non-risingstem(NRS)指示器/限位器indicator/stopper注油器greaseinjector可更换的阀座环renewableseatring1.6.2常用阀(1）闸阀gatevalve平行双闸板doublediscparallelseat开口楔形闸板splitwedge挠性整体楔形闸扳flexiblesolidwedge整体楔形闸板solidwedge塞型闸阀pluggatevalve直通型闸阀throughconduitgatevalve(2)截止阀globevalve球心型阀盘globetypedisc塞型阀盘plugtypedisc可转动的阀盘swiveldisc(3)节流闪阀throttlevalve针阀needlevalve(4)角阀anglevalve(5)Y型阀（Y型阀体截止阀）Y-valve(Y-bodyglobevalve)(6)球阀ballvalve三通球阀3-wayballvalve装有底轴的trunnionmounted耐火型firesafetype浮动球型floatingballtype防脱出阀杆blowoutproofstem(7)蝶阀butterflyvalve对夹式（薄片型）wafertype凸耳式lugtype偏心阀板蝶阀offsetdiscburerflyvalve;eccentricbutterflyvalve 斜阀盘蝶阀canteddiscbutterflyvalve连杆式蝶阀linkbutterflyvalve8)柱塞阀pistontypevalve(9)旋塞阀plugvalve三通旋塞阀three-wayplugvalve四通旋塞阀four-wayplugvalve旋塞cock衬套旋塞sleevecock(10)隔膜阀diaphragmvalve橡胶衬里隔膜阀rubberlineddiaphragmvalve直通式隔膜阀straightwaydiaphragmvalve堰式隔膜阀weirdiaphragmvalve(11)夹紧式胶管阀pinchvalve（用于泥浆、粉尘等）(12)止回阀checkvalve 升降式止回阀liftcheckvalve旋启式止回阀swingcheckvalve,flapcheckvalve落球式止回阀ballcheckvalve弹簧球式止回阀springballcheckvalve双板对夹式止回阀dualplatewafertypecheckvalve无撞击声止回阀non-slamcheekvalve底阀footvalve切断式止回阀stopcheckvalve;non-returnvalve活塞式止回阀pistoncheckvalve斜翻盘止回阀tiltingdisccheckvalve蝶式止回阀butterflycheckvalve1.6.3其它用途的阀安全泄气阀safetyvalve(SV)安全泄液阀reliefvalve(RV)安全泄压阀safetyreliefvalve杠杆重锤式leverandweighttype引导阀操纵的安全泄气阀pilotoperatedsafetyvalve复式安全泄气阀twintypesafetyvalve罐底排污阀flush-bottomtankvalve电磁阀solenoidvalve,solenoidoperatedvalve电动阀electricallyoperatedvalve,electric-motoroperatedvalve气动阀pneumaticoperatedvalve低温用阀cryogenicservicevalve蒸汽疏水阀steamtrap机械式疏水阎mechanicaltrap浮桶式疏水阀openbuckettrap,opentopbuckettrap浮球式疏水阀floattrap倒吊桶式疏水阀invertedbuckettrap自由浮球式疏水阀loosefloattrap恒温式疏水阀thermostatictrap金属膨胀式蒸汽疏水阀metalexpansionsteamtrap液体膨胀式蒸汽疏水阀liquidexpansionsteamtrap双金属膨胀式蒸汽疏水阀bimetallicexpansionsteamtrap压力平衡式恒温疏水阀balancedpressurethermostatictrap热动力式疏水阀thermodynamictrap脉冲式蒸汽疏水阀impulsesteamtrap放气阀（自动放气阀）airventvalve(automaticairventvalve)（疏水阀用）平板式滑动闸阀slabtypeslidinggatevalve盖阀flatvalve换向阀divertingvalve,reversingvalve热膨胀阀thermoexpansionvalve自动关闭阀self-closinggatevalve自动排液阀self-drainingvalve管道盲板阀line-blindvalve挤压阀squeezevalve（用于泥浆及粉尘等）呼吸阀breathervalve风门、挡板damper减压阀pressurereducingvalve,reducingvalve控制阀controlvalve膜式控制阀diaphragmoperatedcontrolvalve执行机构actuator背压调节阀backpressureregulatingvalve 差压调节阀differentialpressureregulatingvalve压力比例调节阀pressureratioregulatingvalve1.6.4未指明结构（或阀型）的阀切断阀blockvalve;shut-offvalve;stopvalve调节阀regulatingvalve快开阀quickopeningvalve快闭阀quickclosingvalve隔断阀isolatingvalve三通阀threewayvalve夹套阔jacketedvalve非旋转式阀non-rotaryvalve排污阀blowdownvalve集液排放阀dripvalve排液阀drainvalve放空阀ventvalve卸载阀unloadingvalve排出阀dischargevalve吸入阀suctionvalve多通路阀multiportvalve取样阀samplingvalve手动阀hand-operatedvalve;manuallyoperatedvalve锻造阀forgedvalve铸造阀castvalve（水）龙头bibb;bib;faucet抽出液阀（小阀）bleedvalve 旁路阀by-passvalve软管阀hosevalve混合阀mixingvalve破真空阀vacuumbreaker冲洗阀flushvalve第一道阀；根部阀primaryvalve根部阀rootvalve总管阀headervalve事故切断阀emergencyvalve1.7管道特殊件PipingSpecialty1.7.1管道特殊件（组件）粗滤器strainer过滤器filter临时粗滤器（锥型）temporarystrainer(conetype)y型粗滤器y-typestrainerT型粗滤器T-typestrainer永久过滤器permanentfilter丝网粗滤器gauzestrainer洗眼器及淋浴器eyewasherandshower视镜sightglass阻火器flamearrester喷嘴；喷头spraynozzle取样冷却器samplecooler消声器silencer膨胀节expansionjoint波纹膨胀节bellowexpansionjoint单波singlebellow双波doublebellow多波multiplebellow压力平衡式膨胀节pressurebalancedexpansion带铰链膨胀节hingedexpansionjoint轴向位移型膨胀节axialmovementtypeexpansionjoint自均衡膨胀节（外加强环）self-equalizingexpansionjoint 带接杆膨胀节tiedexpansionjoint万向型膨胀节universaltypeexpansionjoint球形补偿器balltypeexpansionjoint填函式补偿器sliptype(packedtype)expansionjoint单向滑动填料函补偿器singleactionpackedslipjoint1.7.2管道特殊元件PipingSpecialElement软管接头hoseconnection(HC)快速接头quickcoupling金属软管metalhose橡胶管rubberhose挠性管flexibletube鞍形补强板reinforcingsaddles补强板reinforcementpad特殊法兰specialflange漏斗funnel排液环dripring排液漏斗drainfunnel插板blank垫环spacer8字盲板spectacleblind;figure8blind限流孔板restrictionorifice爆破片rupturedisk法兰盖贴面protectivedisc费托立克接头victauliccoupling1.8端部连接EndConnection法兰端flangedend坡口端beveledend(BE)对焊端buttweldedend平端plainend(PE)承插焊端socketweldingend螺纹端threadedend(TE)承口bellend焊接端weldingend法兰连接（接头）flangedjoint对焊连接（接头）buttweldedjoint螺纹连接，管螺纹连接threadedjoint,pipethreadedjoint锥管螺纹密封焊连接seal-weldedtaperpipethreadedjoint 承插焊连接（接头）socketweldedjoint承插连接（接头）bellandspigotjoint环垫接头ringjoint(RJ)万向接头universaljoint软钎焊连接（接头）solderedjoint搭接接头，松套连接lappedjoint外侧厚度切斜角bevelforoutsidethickncss内侧厚度切斜角bevelforinsidethickness内外侧厚度切斜角bevelforcombinedthickness法兰式的flanged(FLGD)对焊的buttwelded(BW)螺纹的threaded(THD)承插焊的socketwelded(SW)小端为平的smallendplain(SEP)大端为平的largeendplain(LEP)两端平bothendsplain(BEP)小端带螺纹smallendthread(SET)大端带螺纹largeendthread(LET)两端带螺纹bothendthread(BET)一端带螺纹oneendthread(OET)支管连接branchconnection焊接支管branchpipeweldeddirectlytotherunpipe2管道用紧固件及螺纹2.1紧固件螺栓bolt六角头螺栓hexagonalheadbolt方头螺栓squareheadbolt螺柱，双头螺栓studbolt环头螺检eyebolt沉头螺栓countersunk(head)screw地脚螺栓anchorbolt;foundationbolt松紧螺旋扣（花篮螺丝）turnbuckleU形螺栓U-boltT形螺栓T-bolt圆头螺钉roundheadbolt机螺栓，机螺钉maehinebolt顶开螺栓，顶起螺栓Jackscrew自攻螺钉selftappingscrew膨胀螺栓expansionbolt粗制的coarse精制的finished,fine螺母nut六角螺母hexagonalnut方螺母squarenut蝶形螺母wingnut扁螺母flatnut锁紧螺母locknut垫圈washer平垫圈plainwasher 球面垫圈sphericalwasher弹簧垫圈springwasher方垫圈squarewasher斜垫圈slantwasher销轴pinnedshan销pin开口销cotterpin定位销dowelpin带孔销pinwithhole圆锥销taperpin铆钉rivet键key2.2?螺纹左螺纹lefthandthread右螺纹righthandthread管螺纹pipethread锥管螺纹taperpipethread直管螺纹straightpipethread梯形螺纹trapezoidthread螺距pitchofthread粗牙螺纹coarsethread细牙螺纹finethread特细牙螺纹extrafinethread通长螺纹fullthread惠氏螺纹whitworththread公制螺纹metricibread美国标准锥管螺纹Americanstandardtaperpipethread(NPT)螺孔tap3材料、型钢及填料3.1金属材料3.1.1黑色金属FerrousMetal碳素钢carbonsteel(CS)低碳钢low-carbonsteel中碳钢medium-carbonsteel 高碳钢high-carbonsteel普通碳素钢generalcarbonsteel优质碳素钢high-qualitycarbonsteel普通低合金结构钢generalstructurelow-alloysteel合金结构钢structuralalloysteel合金钢alloysteel低合金钢lowalloysteel中合金钢mediumalloysteel 高合金钢highalloysteel耐热钢heatresistingsteel高强度钢highstrengthsteel复合钢cladsteel工具钢toolsteel弹簧钢springsteel钼钢molybdenumsteel镍钢nickelsteel铬钢chromiumsteel铬钼钢chrome-molybdenumsteel铬镍钢chromium-nickelsteel,chrome-nickelsteel不锈钢stainlesssteel(S.S.)奥氏体不锈钢Austeniticstainlesssteel马氏体不锈钢Martensiticstainlesssteel司特来合金（钨铬钴台金）Stellite耐蚀耐热镍基合金Hastelloy铬镍铁合金inconel耐热铬镍铁合金incoloy20合金20alloy平炉钢（马丁钢）Martinsteel镇静钢killedsteel半镇静钢semi-killedsteel沸腾钢rimmedsteel;rimmingsteel;open-steel锻钢forgedsteel铸钢caststeel铸铁castiron(C.I.)灰铸铁greycastiron可锻铸铁malleableiron(MI)球墨铸铁nodularcastiron;nodulargraphiteiron生铁pigiron熟铁，锻铁wroughtiron铸件casting高硅铸铁highsiliconcastiron3.1.2镀层及制造方法渗铬钢，镀铬钢chromizedsteel镀铬的chromium-plated,chrome-plated镀层plating锻造，型钢swage锻造的，锻造forging轧制rolling热轧hotrolling冷轧coldrolling挤压extruding冷加工coldworking热加工hotworking拔制drawing3.1.3有色金属Non-ferrousMetal铝aluminum铜，紫铜copper黄铜brass青铜bronze铝青铜aluminumbronze磷青铜phosphorbronze铝镁合金aluminummagnesium 锰青铜manganesebronze蒙乃尔（注：镍及铜合金）Monel镍铜台金nickelcopperalloy非铁合金nonferrousalloy钛titanium铅lead硬铅hardlead3.1.4材料性能极限强度ultimatestrength抗拉强度tensilestrength屈服极限yieldlimit屈服点yieldpoint延伸率percentageelongation抗压强度compressivestrength抗弯强度bendingstrength弹性极限elasticlimit冲击值impactvalue疲劳极限fatiguelimit蠕变极限creeplimit持久极限endurancelimit布氏硬度Brinellhardness洛氏硬度Rockwellhardness维氏硬度Vickersdiamondhardness,diamondpenetratorhardness蠕变断裂强度creeprupturestrength断面收缩率reductionofarea韧性toughess脆性brittleness延性ductility冷脆coldshortness 冷流coldflow3.2非金属材料Non-metallicMaterial塑料plastic丙烯腈—丁二烯—苯乙烯acrylonitrile-butadiene-styrene(ABS)聚乙烯polyethylene(PE)聚氯乙烯polyvinylchloride(PVC)苯乙烯橡胶styrene-rubber(SR)聚丁烯polybutylene(PB)聚丙烯polypropylene(PP)聚苯乙烯polystyrene(PS)氯化聚醚chlorinatedpolyether(CPE)聚酰胺polyamide(PA)聚碳酸酯polycarbonate(PC)聚甲基丙烯酸甲酯polymethylmethacrylate(PMMA)醋酸丁酸纤维素celluloseacetatebutyrate(CAB)氯化聚氯乙烯chlorinatedpolyvinylchloride(CPVC)聚偏二氟乙烯polyvinylidenefluoride(PVDF)缩醛塑料acetalplastic尼龙塑料nylonplastic聚烯烃polyolefin(PO)石墨酚醛塑料graphitephenolicplastics聚四氟乙烯polytetrafluoroethylene(PTFE)纤维增强热塑性塑料fiberreinforcedthermoplastics热塑性塑料thermoplastic热固性塑料thermosettingplastics 胶粘剂adhesive溶剂胶接剂solventcement树脂resin环氧树脂epoxy,epoxyresin聚酯树脂polyesterresin聚酯纤维polyesterfibers氟塑料fluoroplastics聚氨基甲酸酯polyurethane 丙烯酸树脂acrylicresin脲醛树脂urearesin呋哺树脂furanresin乙烯丙烯二烃单体ethylenepropylenedienemonomer(EPDM)合成橡胶syntheticrubber橡胶rubber丁腈橡胶nitrilebutadienerubber氯丁橡胶neoprene天然橡胶naturalrubber乙丙橡胶ethylenepropylenerubber(EPR)玻璃glass硼硅玻璃borosilicateglass耐火砖firebrick陶瓷ceramic搪瓷porcelainenamel木材wood3.3型材型钢shapedsteel,sectionsteel,swage角钢anglesteel槽钢channel工字钢I-beam宽缘工字钢或H钢wideflangedbeamT型钢T-bar方钢squarebar扁钢flatbar角钢hexagonalsteelbar圆钢roundsteel;rod钢带strapsteel钢板plate网纹钢板checkeredplate腹板（指型钢的立板）web翼缘（指型钢的缘）wing3.4填料及填料函填料packing石棉绳asbestosrope,asbestoscord．O形环O-ring自密封self-sealing四氟带Teflontap带铬镍合金丝的石棉绳asbestosropewithinconelwire,inconelwireasbestos浸聚四氟乙烯的石棉填料Teflonimpregnatedasbestospacking金属填料metallicstuffing填料箱，填料函packingbox,stuffingbox填料函压盖stuffingboxgland。
常用管件管道配件中英文对照
常用管件管道配件中英文对照１.管件系列1.1>>P管子Pipe1.2>>EL弯头Elbow1.2.1>ELL长半径弯头Long radius elbow1.2.2>ELS短半径弯头Short radius elbow1.2.3>MEL斜接弯头（虾米腰弯头）Mitre elbow1.2.4>REL异径弯头Reducing elbow1.3>>T三通Tee1.3.1>LT斜三通Lateral tee1.3.2>RT异径三通Reducing tee1.3.3>CROSS四通1.4>>R异径管接头（大小头）Reducer1.4.1>CR同心异径管接头（同心大小头）Concentric reducer 1.4.2>ER偏心异径管接头（偏心大小头）Eccentric reducer 1.5>>CPL管箍Coupling1.5.1>FCPL双头管箍Full coupling1.5.2>HCPL单头管箍Half coupling1.5.3>RCPL异径管箍Reducing coupling1.6>>BU内外螺纹接头Bushing1.7>>UN活接头Union1.8>>HC软管接头Hose coupler1.9>>SE翻边短节Stub end1.10>>NIP短节Pipe nipple or straight nipple1.10.1>SNIP异径短节Swaged nipple1.11>>CP管帽（封头）Cap1.12>>PL管堵（丝堵）Plug1.13>>BLK盲板Blank1.13.1>SB8字盲板Spectacle blind1.14>>PAD补强板Reinforcing pad1.15>焊接支管台WELDOLET1.16>螺纹支管台THREADOLET1.17>FO限流孔板2法兰2.1>>PLG法兰Flange2.1.1>WNF对焊法兰Welding neck flange2.1.2>SOF平焊法兰Slip-on flange2.1.3>SWF承插焊法兰Socket-welding flange2.1.4>T螺纹法兰Threaded flange2.1.5>LJ松套法兰Lapped joint flange2.1.6>REDF异径法兰Reducing flange2.1.7>BF法兰盖（盲法兰）Blind flange2.2>>FSF法兰密封面Flange scaling face2.2.1>FF全平面Flat face2.2.2>RF凸台面Raised face2.2.3>MFF凹凸面Male and female face2.2.4>LF凹面Female face2.2.5>LM凸面Male face2.2.6>RJ环连接面Ring joint face2.2.7>TG榫槽面Tongue and groove face2.2.8>TF榫面Tongue face2.2.9>GF槽面Groove face3垫片3.1>>>G垫片Gasket3.1.1>>NMG非金属垫片Non-metallic gasket3.1.1.1>AG石棉垫片Asbestos gasket3.1.1.2>RG橡胶垫片Rubber gasket3.1.1.3>TEG聚四氟乙烯包复垫片PTFE envelope gasket 3.1.2>>SMG半金属垫片Semimetallic gasket3.1.2.1>MJG金属包垫片Meta-jacket gasket3.1.2.2>SWG缠绕式垫片Spiral wound gasket3.1.3>>MG金属垫片Metallic gasket3.1.3.1>FMG金属平垫片Flat metallic gasket3.1.3.2>SMSG齿形金属垫片Solid metal serrated gasket 3.1.3.3>LER透镜式金属环垫Lens ring gasket3.1.3.4>OCR八角形金属环垫Octagonal ring gasket3.1.3.5>OVR椭圆形金属环垫Oval ring gakset3.1.3.6>IR/OR内外定位环Inner ring and outer ring 3.1.3.7>IR内定位环Inner ring3.1.3.8>OR外定位环Outer ring4坚固件4.1>>B螺栓Bolt4.1.1>SB螺柱Stud bolt4.2>>NU螺母Nut4.3>>TB花蓝螺母Turnbuckle4.4>>WSR垫圈Washer4.4.1>SWSR弹簧垫圈Spring washer5阀门5.1>>GV闸阀Gate valve5.2>>GLV截止阀Globe valve5.3>>CHV止回阀Check valve5.4>>BUV蝶阀Butterfly valve5.5>>BAV球阀Ball valve5.6>>PV旋塞阀Plug valve(cock)5.7>>CV调节阀Control valve5.8>>SV安全阀Safety valve5.9>>RV减压阀Pressure reducing valve 5.10>>ST蒸汽疏水阀Steam trap5.11>>PRV泄压阀Pressur relief valve5.12>>BV呼吸阀Breather valve5.13>>NV针形阀Needle valve5.14>>AV角阀5.15>>DV隔膜阀5.16>>TWV三通阀5.17>>SGV插板阀6管道上用的小型设备6.1>>SPR气液分离器Separator6.2>>FA阻火器Flame arrester6.3>>SR过滤器Strainer6.3.1>SRY Y型过滤器Y-type strainer6.3.2>SRT T型过滤器T-type strainer6.3.3>SRB桶式过滤器Bucket type strainer 6.3.4>TSR临时过滤器Temporary strainer 6.4.>>SIL消声器Silencer6.5>>SG视镜Slight glass6.6>>SC取样冷却器Sample cooler6.7>>DF排液漏斗Drain funnel6.8>>LM管道混合器Line mixer6.9>>RO限流孔板Restriction orifice6.9.1>MO混合孔板Mixing orifice6.1>>>RD爆破片（爆破膜）Rupture disk6.11>>EJ补偿器Expansion joint7隔热、伴热编号缩写中文名称英文名称7.1>>INS隔热Thermal insulation7.1.1>H保温Hot insulation7.1.2>C保冷Cold insulation7.1.3>>P防烫伤隔热Personnel protection insulation7.2>T&I伴热Tracing and insulation7.3>T管道伴热（冷）Tracing7.3.1>EST蒸汽外伴热External steam tracing7.3.2>IST蒸汽内伴热Internal steam tracing7.3.3>SJT蒸汽夹套伴热Steam-jacket tracing7.3.4>ET电伴热Electric tracing8、配管材料和等级8.1>M金属材料Metallic material8.1.1>CS碳钢Carbon steel8.1.2>CAS铸钢Cast steel8.1.3>FS锻钢Forged steel8.1.4>>AS合金钢Alloy steel8.1.5>SS不锈钢Stainless steel8.1.6>AUST SS奥氏体不锈钢Austenitic stainless-steel 8.1.7>>CI铸铁Cast iron8.1.8>MI可锻铸铁Malleable iron8.1.9>DI球墨铸铁Ductile iron8.1.10>AL铝Aluminum8.1.11>BRS黄铜Brass8.1.12>BRZ青铜Bronze8.1.13>CU紫铜Copper8.1.14>LAS低合金钢Low alloy steel8.1.15>FLAS低合金锻钢Forged low alloy steel8.1.16>CLAS低合金铸钢Cast low alloy steel8.2>>THK壁厚Thickness8.2.1>SCH表号Schedule number8.2.2>STD标准Standard8.2.3>>XS加强Extra strong8.2.4>>XXS特强Double extra strong9、装置布置9.1>>CN建北Construction north9.2>>E东East9.3>>W西West9.4>>S南South9.5>>N北North9.6>>H水平Horizontal9.7>>V竖直、铅直、直立Vertical9.8>>GRD地坪Ground9.9>>UG地下Underground9.10>>BL装置边界线Battery limit line9.11>>ESEW事故沐浴洗眼器Emergency shower and eye washer 9.12>>HS软管站Hose station9.13>>ML接续分界线Match line9.14>>PS管道支架（管架）Piping support9.15>>PR管桥Pipe rack9.16>>STRU构架（构筑物）Structure9.17>>BLDG建筑物Building9.18>>PD清扫设施Purge device9.19>>PT池Pit9.20>>SHLT棚Shelter9.21>>COFF围堰Cofferdam9.22>>FL楼板Floor9.23>>PF平台Plateform10、尺寸标注10.1>>>EL标高Elevation10.2>>BOP管底Bottom of pipe10.3>>COP管中心Center of pipe10.4>>TOP管顶Top of pipe10.5>>FOB底平Flat on bottom10.6>>FOT顶平Flat on top10.7>>CL(屯)中心线Center line10.8>>TL切线Tangent line10.9>>SYM对称的Symmetrical10.10>>BOS支架底Bottom of support10.11>>TOS支架顶Top of support10.12>>CL净距（净空）Clearance10.13>>CTC中心至中心Center to center10.14>>CTF中心至面Center to face10.15>>CTE中心至端部Center to end10.16>>ETE端到端End to end10.17>>FEF法兰端面Flange and face10.18>>FTF面到面Face to face10.19>>D直径Diameter10.20>>DN公称直径Nominal diameter10.21>>ID内径Inside diameter10.22>>OD外径Outside diameter10.23>>DIM尺寸Dimension10.24>>MAX最大Maximum10.25>>MIN最小Minimum10.26>>AVG平均Average10.27>>APP约、近似Approximate10.28>>PT.EL点标高Point elevation11图表11.1>>PFD工艺流程图Process flow diagram11.2>>PID管道和仪表流程图Piping&instrument diagram11.3>>COD接续图Continued on drawing11.4>>DTL详图Datail11.5>>SPDWG管段图Spool drawing(each line isometric drawing) 11.6>>DWGNO图号Drawing number11.7>>DWGI所在图号Drawing identification11.8>>LOW材料表List of material11.9>>MTO汇料Material take-off11.10>>APPX附录Appendix11.11>>JOB.No.工号Job Number11.12>>BEDD基础工程设计数据Basic engineering design data 11.13>>DEDD详细工程设计数据Detail engineering design data 11.14>>REV.No.修改号Recision number11.15>>REF DWG参考图Reference drawing11.16>>SC采样接口Sample connection12、操作方式及工作参数12.1>>AUT自动Automatic12.2>>ML手动Manual control12.3>>CHOP链条操作Chain operated12.4>>CSC铅封关Car seal close12.5>>CSO铅封开Car seal open12.6>>LC锁闭Lock closed12.7>>LO锁开Lock open12.8>>NC正常关Normally close12.9>>NO正常开Normally open12.10>>ATM大气压Atmosphere12.11>>PN公称压力Nominal pressure12.12>>A绝压12.13>>G表压12.14>>(T)温度Temperature12.15>>(P)压力Pressure13、施工13.1>>W焊接Welding13.1.1>AW(SMAW)电弧焊Arc welding13.1.2>GSAW气体保护电弧焊Gas shielded-acr welding13.1.3>EFW电熔焊Elecric fusion welding13.1.4>ERW电阻焊Electric Resistance welding13.1.5>GW气焊Gas welding13.1.6>LW搭接焊Lap welding13.1.7>BW对焊Butt welding13.1.8>TW定位焊Tack welding13.1.9>SW承插焊Socket welding13.1.10>CW连续焊Continuous welding13.1.11>SEW密封焊Seal welding13.1.12>SFG堆焊Surfacing13.1.13>FW现场焊接Field welding13.1.14>TIG(GTAW)钨极惰性气体保护焊(氩弧焊) Gas Tungsten Arc Weld 13.2>>HT热处理Heat treatment13.2.1>>PH预热Preheating13.2.2>SR应力消除Stress relief13.2.3>PWHT焊后热处理Post weld heat treatment13.3>EIT检查、探伤和实验Examination,inspection&testing13.3.1>VE外观检查Visual examination13.3.2>>UI(UT)超声探伤Ultrasonic inspection(test)13.3.3>>RI(RT)射线探伤Radiographic inspection(test)13.3.4>MPI(MT)磁粉探伤Magnetic particle inspection(test)13.3.5>LPI(PT)液体渗透检验Liquid penterant inspection(test)13.3.6>HADT硬度实验Hardness testing13.3.7>HYDT水压实验Hydraulic testing13.3.8>PNET气压实验Pneumatic testing13.3.9>CE焊条Covered electrode13.3.10>WW焊丝Welding wire13.3.11>ASSY装配、组合Assembly13.3.12>F现场Field13.3.13>F/F现场制造Field faricated13.3.14>SF现场决定Suit in field13.3.15>CSP冷紧Cold spring13.3.16>BCT螺栓冷紧Bolt cold tightening13.3.17>BHY螺栓热紧Bolt hot tightening13.3.18>CO清洗口Clean out13.3.19>ANNY退火Annealed13.4>PE平端面Plain end13.5>BE坡口端Belelled end13.6>THR螺纹Thread13.7>HB布氏硬度Brinnel hardness13.8>RC洛氏硬度14、其他14.1>FDN基础Foundation14.2>INF信息（资料）Information14.3>REF参考Reference14.4>REV修改Revision14.5>SEQ序号（顺序）Sequence14.6>W/E设备带来With equipment14.7>W/I仪表带来With instrument14.8>CM色标Colour mark14.9>CA腐蚀裕度Corrosion allowance14.10>UTL公用系统Utility14.11>UC公用工程接头Utility connection14.12>QTY数量Quantity14.13>WT重量Weight14.14>MHR工时Man hour14.15>BC螺栓分布圆Bolt circle14.16>HP高点High point14.17>LP低点Low point14.18>SUC吸入（口）Suction14.19DIS排出（口）Discharge14.20>SO蒸气吹扫（口）Steam out14.21>NPT美国标准锥管螺纹National standard taper pipe thread 14.22>NPS美国标准直管螺纹National standard straight pipe thread 14.23>DR排液Drain14.24>VT放气Vent14.25>RTG（压力）等级Rating14.26>CL等级Class14.27>SMLS无缝Seamless14.28>螺旋缝Spiral seam。
管件和垫片中英文对照
一、美国美标管件标准美国标准ASME/ANSI B16.9 工厂制造的锻钢对焊管件ASME/ANSI B16.11 承插焊和螺纹锻造管件ASME/ANSI B16.28 钢制对焊小半径弯头和回头弯ASME B16.5 管法兰和法兰配件MSS SP-43 锻制不锈钢对焊管件MSS SP-83 承插焊和螺纹活接头MSS SP-97 承插焊、螺纹和对焊端的整体加强式管座二、垫片 Gasket (GSKT)垫片的型式 type of gasket平垫片 flat gasket环形平垫片 flat ring gasket平金属垫片 flat metal gasket夹棉织物的橡胶 elastomer with cotton fabric insertion夹石棉织物的橡胶 elastomer with asbestos fabric insertion夹石棉织物及金属丝加强的橡胶elastomer with asbestos fabric insertion and with wire reinforcement无石墨压缩白石棉垫片non graphited compressed white asbestos gasket天然白橡胶垫片 natural white rubber gasket压缩石棉垫片 compressed asbestos class gasket浸聚四氟乙烯的石棉垫片 PTFE impregnated asbestos gasket夹石棉的缠绕金属垫片spiral-wound metal gasket with asbestos filler内环 inner ring外环，外定位环 outer ring波纹金属垫片 corrugated metal gasket波纹金属包嵌石棉垫片corrugated metal gasket with asbestos inserted双夹套波纹金属包石棉垫片corrugated metal double jacketed asbestos filled gasket双夹套垫片 double jacketed gasket金属包石棉平垫片 flat metal jacketed asbestos filled gasket整体金属齿形垫片 solid metal serrated gasket槽形金属垫片 grooved metal gasket环形连接金属垫片 ring joint metal gasket八角环形垫片 octagonal ring gasket椭圆环形垫片 oval ring gasket透镜式垫片 lens gasket非金属垫片 non-metallic gasket三、各种法兰管件中英文对照表法兰 Flange (FLG）整体管法兰 integral pipe flange钢管法兰 steel pipe flange螺纹法兰 threaded flange滑套法兰（包括平焊法兰） slip-on flange (SO); slip-on welding flange 承插焊法兰 socket welding flange松套法兰 lap joint flange (LJF)对焊法兰 welding neckflange (WNF)法兰盖 blind flange, blind孔板法兰 orifice flange异径法兰 reducing flange盘座式法兰 pad type flange松套带颈法兰 loose hubbed flange焊接板式法兰 welding plate flange对焊环 welding neck collar （及stub end相似）平焊环 welding-on collar突缘短节 stub end, lap翻边端 lapped pipe end松套板式法兰 loose plate flange压力级 pressure rating, pressure rating class压力—温度等级 pressure-temperature rating法兰密封面，法兰面 flange facing突面 raised face (RF)凸面 male face (MF)凹面 female face (FMF)榫面 tongue face槽面 groove face环连接面 ring joint face全平面；满平面 flat face; full face (FF)光滑突面 smooth raised face (SRF)法兰面加工 facing finish粗糙度 roughness光滑的 smooth齿形 serrated均方根 root mean square (RMS)算术平均粗糙高度 arithmetical average roughness height (AARH) 配对法兰 companion-flange螺栓圆 bolt circle (B.C.)四管道特殊件 Piping Specialty1.7.1 管道特殊件（组件）粗滤器 strainer过滤器 filter临时粗滤器（锥型） temporary strainer (cone type)y 型粗滤器 y-type strainerT型粗滤器 T-type strainer永久过滤器 permanent filter丝网粗滤器 gauze strainer洗眼器及淋浴器 eye washer and shower视镜 sight glass阻火器 flame arrester喷嘴；喷头 spray nozzle取样冷却器 sample cooler消声器 silencer膨胀节 expansion joint波纹膨胀节 bellow expansion joint单波 single bellow双波 double bellow多波 multiple bellow压力平衡式膨胀节 pressure balanced expansion带铰链膨胀节 hinged expansion joint轴向位移型膨胀节 axial movement type expansion joint自均衡膨胀节（外加强环）self-equalizing expansion joint 带接杆膨胀节 tied expansion joint万向型膨胀节 universal type expansion joint球形补偿器 ball type expansion joint填函式补偿器 slip type (packed type) expansion joint单向滑动填料函补偿器 single actionpacked slip joint1.7.2 管道特殊元件Piping Special Element软管接头 hose connection (HC)快速接头 quick coupling金属软管 metal hose橡胶管 rubber hose挠性管 flexible tube鞍形补强板 reinforcing saddles补强板 reinforcement pad特殊法兰 special flange漏斗 funnel排液环 drip ring排液漏斗 drain funnel插板 blank垫环 spacer8字盲板 spectacle blind; figure 8 blind 限流孔板 restriction orifice爆破片 rupture disk法兰盖贴面 protective disc费托立克接头 victaulic coupling1.8 端部连接 End Connection法兰端 flanged end坡口端 beveled end (BE)对焊端 butt welded end平端 plain end (PE)承插焊端 socket welding end螺纹端 threaded end (TE)承口 bell end焊接端 welding end法兰连接（接头） flanged joint对焊连接（接头） butt welded joint螺纹连接，管螺纹连接 threaded joint, pipe threaded joint 锥管螺纹密封焊连接 seal-welded taper pipe threaded joint 承插焊连接（接头） socket welded joint承插连接（接头） bell and spigot joint环垫接头 ring joint (RJ)万向接头 universal joint软钎焊连接（接头） soldered joint搭接接头，松套连接 lapped joint外侧厚度切斜角 bevel for outside thickncss内侧厚度切斜角 bevel for inside thickness内外侧厚度切斜角 bevel for combined thickness法兰式的 flanged (FLGD)对焊的 butt welded (BW)螺纹的 threaded (THD)承插焊的 socket welded (SW)小端为平的 small end plain (SEP)大端为平的 large end plain (LEP)两端平 both ends plain (BEP)小端带螺纹 small end thread (SET)大端带螺纹 large end thread (LET)两端带螺纹 both end thread (BET)一端带螺纹 one end thread (OET)支管连接 branch connection焊接支管 branch pipe welded directly to the run pipe 五、管件 Fitting弯头 elbow异径弯头 reducing elbow带支座弯头 base elbowk半径弯头 long radius elbow短半径弯头 short radius elbow长半径180°弯头 long radius return短半径180°弯头 short radius return带侧向口的弯头（右向或左向） side outlet elbow (right hand or left hand)双支管弯头（形） double branch elbow三通 tee异径三通 reducing tee等径三通 straight tee带侧向口的三通（右向或左向） side outlet tee (right hand or 1eft hand)异径三通（分支口为异径） reducing tee (reducing on outlet)异径三通（一个直通口为异径）reducing tee (reducing on one run) 带支座三通 base tee异径三通（一个直通口及分支口为异径） reducing tee (reducing on one run and outlet)异径三通（两个直通口为异径，双头式） reducing tee (reducing on both runs, bull head)45°斜三通45° lateral45°斜三通（支管为异径）45° lateral (reducing on branch)45°斜三通(一个直通口为异径) 45° lateral (reducing on one run) 45°斜三通(一个直通口及支管为异径) 45° latera l (reducing on one run and branch)Y型三通（俗称裤衩）true “Y”四通 cross等径四通 straight cross异径四通 reducing cross异径四通（一个分支口为异径）reducing cross (reducing on one outlet) 异径四通（一个直通口及分支口为异径） reducing cross (reducing on one run and outlet)异径四通（两个分支口为异径） reducing cross (reducing on both outlet) 异径四通（一个直通口及两个分支口为异径） reducing cross (reducing on one run and both outlet)异径管 reducer同心异径管 concentric reducer偏心异径管 eccentric reducer锻制异径管 reducing swage螺纹支管台 threadolet焊接支管台 weldolet承插支管台 sockolet弯头支管台 elbolet斜接支管台 latrolet镶入式支管嘴 sweepolet短管支管台 nipolet支管台，插入式支管台 boss管接头 coupling, full coupling半管接头 half coupling异径管接头 reducing coupling活接头 union内外螺纹缩接（俗称补芯） bushing管帽 cap (C)堵头 plug短节 nipple异径短节 reducing nipple; swage nipple1.3 弯管 Bend预制弯管 fabricated pipe bend跨越弯管（^ 形） cross-over bend偏置弯管（~ 形） offset bend90°弯管 quarter bend环形弯管 cirele bend单侧偏置90°弯管（? 形） single offset quarter bend S形弯管“S” bend单侧偏置U形膨胀弯管（| ?形）single offset “U” bend U形弯管“U” bend双偏置U膨胀弯管double offset expansion “U” bend斜接弯管 mitre bend三节斜接弯管 3-piece mitre bend折皱弯管 corrugated bend 圆度 roundness。
管道及配件中英文对照
管道及配件中英文对照化工管道词汇翻译1 管道组成件Piping component1.1 管子Pipe管子(按照配管标准规格制造的) pipe管子（不按配管标准规格制造的其他用管）tube钢管steel pipe铸铁管cast iron pipe衬里管lined pipe复合管clad pipe碳钢管carbon steel pipe合金钢管alloy steel pipe不锈钢stainless steel pipe奥氏体不锈钢管austenitic stainless steel pipe铁合金钢管ferritic alloy steel pipe轧制钢管wrought—steel pipe锻铁管wrought—iron pipe无缝钢管seamless (SMLS）steel pipe焊接钢管welded steel pipe电阻焊钢管electric—resistance welded steel pipe电熔（弧）焊钢板卷管electric-fusion （arc）—welded steel-plate pipe 螺旋焊接钢管spiral welded steel pipe镀锌钢管galvanized steel pipe热轧无缝钢管hot—rolling seamless pipe冷拔无缝钢管cold-drawing seamless pipe水煤气钢管water-gas steel pipe塑料管plastic pipe玻璃管glass tube橡胶管rubber tube直管run pipe；straight pipe1。
2 管件Fitting弯头elbow异径弯头reducing elbow带支座弯头base elbow长半径弯头long radius elbow短半径弯头short radius elbow长半径180°弯头long radius return短半径180°弯头short radius return带侧向口的弯头（右向或左向）side outlet elbow (right hand or left hand)双支管弯头（形）double branch elbow三通tee异径三通reducing tee等径三通straight tee带侧向口的三通(右向或左向）side outlet tee (right hand or 1eft hand）异径三通（分支口为异径）reducing tee （reducing on outlet）异径三通（一个直通口为异径）reducing tee （reducing on one run）带支座三通base tee异径三通(一个直通口及分支口为异径）reducing tee （reducing on one run and outlet)异径三通（两个直通口为异径，双头式）reducing tee （reducing on both runs，bull head）45°斜三通45°lateral管道及配件中英文对照245°斜三通(支管为异径）45°lateral (reducing on branch）45°斜三通(一个直通口为异径）45°lateral （reducing on one run)45°斜三通（一个直通口及支管为异径）45°lateral (reducing on one run and branch)Y型三通（俗称裤衩）true “Y”四通cross等径四通straight cross异径四通reducing cross异径四通(一个分支口为异径)reducing cross （reducing on one outlet)异径四通(一个直通口及分支口为异径) reducing cross （reducing on one run and outlet）异径四通（两个分支口为异径）reducing cross （reducing on both outlet）异径四通(一个直通口及两个分支口为异径）reducing cross (reducing on one run and both outlet）异径管reducer同心异径管concentric reducer偏心异径管eccentric reducer锻制异径管reducing swage螺纹支管台threadolet焊接支管台weldolet承插支管台sockolet弯头支管台elbolet斜接支管台latrolet镶入式支管嘴sweepolet短管支管台nipolet支管台，插入式支管台boss（以上带红线的单词已经查过，应该是行业很组合的名词,可以查得到）.管接头coupling，full coupling半管接头half coupling异径管接头reducing coupling活接头union内外螺纹缩接(俗称补芯）bushing管帽cap （C)堵头plug短节nipple异径短节reducing nipple；swage nipple两端无螺纹PBE plain both end一端平口POE plain one end一端螺纹TOE thread one end两端螺纹TBE thread both end1.3 弯管Bend预制弯管fabricated pipe bend跨越弯管（形）cross—over bend偏置弯管（~ 形）offset bend90°弯管quarter bend环形弯管circle bend单侧偏置90°弯管(？形）single offset quarter bendS形弯管“S”bend单侧偏置U形膨胀弯管(| ？形）single offset “U”bendU形弯管“U”bend双偏置U膨胀弯管double offset expansion “U”bend斜接弯管mitre bend三节斜接弯管3-piece mitre bend折皱弯管corrugated bend圆度roundness1.4 法兰Flange （FLG）整体管法兰integral pipe flange钢管法兰steel pipe flange螺纹法兰threaded flange滑套法兰（包括平焊法兰）slip—on flange (SO); slip—on welding flange 承插焊法兰socket welding flange松套法兰lap joint flange （LJF）对焊法兰welding neck flange (WNF）法兰盖blind flange, blind孔板法兰orifice flange异径法兰reducing flange盘座式法兰pad type flange松套带颈法兰loose hubbed flange焊接板式法兰welding plate flange对焊环welding neck collar （与stub end相似）平焊环welding—on collar突缘短节stub end，lap翻边端lapped pipe end松套板式法兰loose plate flange压力级pressure rating, pressure rating class压力-温度等级pressure—temperature rating法兰密封面,法兰面flange facing突面raised face (RF）凸面male face (MF）凹面female face (FMF）榫面tongue face槽面groove face环连接面ring joint face全平面;满平面flat face；full face (FF）光滑突面smooth raised face （SRF）法兰面加工facing finish粗糙度roughness光滑的smooth齿形serrated均方根root mean square (RMS)算术平均粗糙高度arithmetical average roughness height (AARH）配对法兰companion-flange螺栓圆bolt circle （B.C.)1.5 垫片Gasket （GSKT)垫片的型式type of gasket平垫片flat gasket环形平垫片flat ring gasket平金属垫片flat metal gasket夹棉织物的橡胶elastomer with cotton fabric insertion夹石棉织物的橡胶elastomer with asbestos fabric insertion夹石棉织物及金属丝加强的橡胶elastomer with asbestos fabric insertion and with wire reinforcement无石墨压缩白石棉垫片non graphited compressed white asbestos gasket天然白橡胶垫片natural white rubber gasket压缩石棉垫片compressed asbestos class gasket浸聚四氟乙烯的石棉垫片PTFE impregnated asbestos gasket夹石棉的缠绕金属垫片spiral-wound metal gasket with asbestos filler内环inner ring外环,外定位环outer ring波纹金属垫片corrugated metal gasket波纹金属包嵌石棉垫片corrugated metal gasket with asbestos inserted双夹套波纹金属包石棉垫片corrugated metal double jacketed asbestos filled gasket双夹套垫片double jacketed gasket金属包石棉平垫片flat metal jacketed asbestos filled gasket整体金属齿形垫片solid metal serrated gasket槽形金属垫片grooved metal gasket环形连接金属垫片ring joint metal gasket八角环形垫片octagonal ring gasket椭圆环形垫片oval ring gasket透镜式垫片lens gasket非金属垫片non—metallic gasket1.6 阀门Valve1。
管件中英文对照表
1 管道组成件 Piping component1.1 管子 Pipe管子(按照配管标准规格制造的) pipe管子(不按配管标准规格制造的其他用管) tube钢管 steel pipe铸铁管 cast iron pipe衬里管 lined pipe复合管 clad pipe碳钢管 carbon steel pipe合金钢管 alloy steel pipe不锈钢 stainless steel pipe奥氏体不锈钢管 austenitic stainless steel pipe铁合金钢管 ferritic alloy steel pipe轧制钢管 wrought-steel pipe锻铁管 wrought-iron pipe无缝钢管 seamless (SMLS) steel pipe焊接钢管 welded steel pipe电阻焊钢管 electric-resistance welded steel pipe电熔（弧）焊钢板卷管 electric-fusion (arc)-welded steel-plate pipe螺旋焊接钢管 spiral welded steel pipe镀锌钢管 galvanized steel pipe热轧无缝钢管 hot-rolling seamless pipe冷拔无缝钢管 cold-drawing seamless pipe水煤气钢管 water-gas steel pipe塑料管 plastic pipe玻璃管 glass tube橡胶管 rubber tube直管 run pipe; straight pipe1.2 管件 Fitting弯头 elbow异径弯头 reducing elbow带支座弯头 base elbowk半径弯头 long radius elbow短半径弯头 short radius elbow长半径180°弯头 long radius return短半径180°弯头 short radius return带侧向口的弯头（右向或左向） side outlet elbow (right hand or left hand) 双支管弯头（形） double branch elbow三通 tee异径三通 reducing tee等径三通 straight tee带侧向口的三通（右向或左向） side outlet tee (right hand or 1eft hand) 异径三通（分支口为异径） reducing tee (reducing on outlet)异径三通（一个直通口为异径）reducing tee (reducing on one run)带支座三通 base tee异径三通（一个直通口及分支口为异径） reducing tee (reducing on one run and outlet)异径三通（两个直通口为异径，双头式） reducing tee (reducing on both runs, bull head)45°斜三通45° lateral45°斜三通（支管为异径）45° lateral (reducing on branch)45°斜三通(一个直通口为异径) 45° l ateral (reducing on one run)45°斜三通(一个直通口及支管为异径) 45° lateral (reducing on one run and branch)Y型三通（俗称裤衩）true “Y”四通 cross等径四通 straight cross异径四通 reducing cross异径四通（一个分支口为异径）reducing cross (reducing on one outlet) 异径四通（一个直通口及分支口为异径） reducing cross (reducing on one run and outlet)异径四通（两个分支口为异径） reducing cross (reducing on both outlet) 异径四通（一个直通口及两个分支口为异径） reducing cross (reducing on one run and both outlet)异径管 reducer同心异径管 concentric reducer偏心异径管 eccentric reducer锻制异径管 reducing swage螺纹支管台 threadolet焊接支管台 weldolet承插支管台 sockolet弯头支管台 elbolet斜接支管台 latrolet镶入式支管嘴 sweepolet短管支管台 nipolet支管台，插入式支管台 boss管接头 coupling, full coupling半管接头 half coupling异径管接头 reducing coupling活接头 union内外螺纹缩接（俗称补芯） bushing管帽 cap (C)堵头 plug短节 nipple异径短节 reducing nipple; swage nipple1.3 弯管 Bend预制弯管 fabricated pipe bend跨越弯管cross-over bend偏置弯管 offset bend90°弯管 quarter bend环形弯管 cirele bend单侧偏置90°弯管 single offset quarter bendS形弯管“S” bend单侧偏置U形膨胀弯管single offset “U” bendU形弯管“U” bend双偏置U膨胀弯管double offset expansion “U” bend斜接弯管 mitre bend三节斜接弯管 3-piece mitre bend折皱弯管 corrugated bend圆度 roundness1.4 法兰 Flange (FLG)整体管法兰 integral pipe flange钢管法兰 steel pipe flange螺纹法兰 threaded flange滑套法兰（包括平焊法兰） slip-on flange (SO); slip-on welding flange 承插焊法兰 socket welding flange松套法兰 lap joint flange (LJF)对焊法兰 welding neckflange (WNF)法兰盖 blind flange, blind孔板法兰 orifice flange异径法兰 reducing flange盘座式法兰 pad type flange松套带颈法兰 loose hubbed flange焊接板式法兰 welding plate flange对焊环 welding neck collar （与stub end相似）平焊环 welding-on collar翻边端 lapped pipe end松套板式法兰 loose plate flange压力级 pressure rating, pressure rating class压力—温度等级 pressure-temperature rating法兰密封面，法兰面 flange facing突面 raised face (RF)凸面 male face (MF)凹面 female face (FMF)榫面 tongue face槽面 groove face环连接面 ring joint face全平面；满平面 flat face; full face (FF)光滑突面 smooth raised face (SRF)法兰面加工 facing finish粗糙度 roughness光滑的 smooth齿形 serrated均方根 root mean square (RMS)算术平均粗糙高度 arithmetical average roughness height (AARH)配对法兰 companion-flange螺栓圆 bolt circle (B.C.)1.5 垫片 Gasket (GSKT)垫片的型式 type of gasket平垫片 flat gasket环形平垫片 flat ring gasket平金属垫片 flat metal gasket夹棉织物的橡胶 elastomer with cotton fabric insertion夹石棉织物的橡胶 elastomer with asbestos fabric insertion夹石棉织物及金属丝加强的橡胶 elastomer with asbestos fabric insertion and with wire reinforcement无石墨压缩白石棉垫片 non graphited compressed white asbestos gasket 天然白橡胶垫片 natural white rubber gasket压缩石棉垫片 compressed asbestos class gasket浸聚四氟乙烯的石棉垫片 PTFE impregnated asbestos gasket夹石棉的缠绕金属垫片 spiral-wound metal gasket with asbestos filler 内环 inner ring外环，外定位环 outer ring波纹金属垫片 corrugated metal gasket波纹金属包嵌石棉垫片 corrugated metal gasket with asbestos inserted 双夹套波纹金属包石棉垫片 corrugated metal double jacketed asbestos filled gasket双夹套垫片 double jacketed gasket金属包石棉平垫片 flat metal jacketed asbestos filled gasket整体金属齿形垫片 solid metal serrated gasket槽形金属垫片 grooved metal gasket环形连接金属垫片 ring joint metal gasket八角环形垫片 octagonal ring gasket椭圆环形垫片 oval ring gasket透镜式垫片 lens gasket非金属垫片 non-metallic gasket1.6 阀门 Valve1.6.1 阀门结构、零件阀轭 yoke外螺纹阀杆及阀轭 outside screw and yoke (OS & Y)阀杆 stem内螺纹 inside screw (IS)阀轭套 yoke sleeve阀杆环 stem ring阀座 valve seat (body seat)阀座环、密封圈 seat ring整体（阀）座 integral seat堆焊（阀）座 deposited seat阀芯（包括密封圈、杆等内件） trim阀盘 disc阀盘密封圈 disc seat阀体 body阀盖 bonnet阀盖衬套 bonnet bush螺纹阀帽 screw cap螺纹阀盖 screw bonnet螺栓连接的阀盖 bolted bonnet (BB)活接阀盖（帽） union bonnet (cap)螺栓连接的阀帽 bolted cap (BC)焊接阀盖 welded bonnet (WB)本体阀杆密封 body stem seal石棉安全密封 asbestos emenen seal倒密封 back seal压力密封的阀盖 pressure-tight bonnet动力操纵器 powered operator电动操纵器 electric motor operator气动操纵器 pneumatic operator液压操纵器 hydraulic operator快速操纵器 quick-acting operator滑动阀杆 sliding stem正齿轮传动 spur gear operated伞齿轮传动 bevel gear operated扳手操作 wrench operated 链轮 chain wheel手轮 hand wheel手柄 hand lever (handle)气缸（或液压缸）操纵的 cylinder operated链条操纵的 chain operated等径孔道 full bore; full port异径孔道 reducing bore, reduced port,venturi port短型 short pattern紧凑型（小型） compact type笼式环 lantern ring压盖 gland阀杆填料 stem packing阀盖垫片 bonnet gasket升杆式（明杆） rising stem (RS)非升杆式（暗杆） non-rising stem (NRS)指示器/限位器 indicator/stopper注油器 grease injector可更换的阀座环 renewable seat ring1.6.2 常用阀(1)闸阀 gate valve平行双闸板 double disc parallel seat开口楔形闸板 split wedge挠性整体楔形闸扳 flexible solid wedge整体楔形闸板 solid wedge塞型闸阀 plug gate valve直通型闸阀 through conduit gate valve(2) 截止阀 globe valve球心型阀盘 globe type disc塞型阀盘 plug type disc可转动的阀盘 swivel disc(3) 节流闪阀 throttle valve针阀 needle valve(4) 角阀 angle valve(5) Y型阀（Y型阀体截止阀） Y-valve (Y-body globe valve)(6) 球阀 ball valve三通球阀 3-way ball valve装有底轴的 trunnion mounted耐火型 fire safe type浮动球型 floating ball type防脱出阀杆 blowout proof stem(7) 蝶阀 butterfly valve对夹式（薄片型） wafer type凸耳式 lug type偏心阀板蝶阀 offset disc burerfly valve; eccentric butterfly valve 斜阀盘蝶阀 canted disc butterfly valve连杆式蝶阀 link butterfly valve8) 柱塞阀 piston type valve(9) 旋塞阀 plug valve三通旋塞阀 three-way plug valve四通旋塞阀 four-way plug valve旋塞 cock衬套旋塞 sleeve cock(10) 隔膜阀 diaphragm valve橡胶衬里隔膜阀 rubber lined diaphragm valve直通式隔膜阀 straight way diaphragm valve堰式隔膜阀 weir diaphragm valve(11) 夹紧式胶管阀 pinch valve（用于泥浆、粉尘等）(12) 止回阀 check valve升降式止回阀 lift check valve旋启式止回阀 swing check valve, flap check valve落球式止回阀 ball check valve弹簧球式止回阀 spring ball check valve双板对夹式止回阀 dual plate wafer type check valve无撞击声止回阀 non-slam cheek valve底阀 foot valve切断式止回阀 stop check valve; non-return valve活塞式止回阀 piston check valve斜翻盘止回阀 tilting disc check valve蝶式止回阀 butterfly check valve1.6.3 其它用途的阀安全泄气阀 safety valve (SV)安全泄液阀 relief valve (RV)安全泄压阀 safety relief valve杠杆重锤式 lever and weight type引导阀操纵的安全泄气阀 pilot operated safety valve复式安全泄气阀 twin type safety valve罐底排污阀 flush-bottom tank valve电磁阀 solenoid valve, solenoid operated valve电动阀 electrically operated valve, electric-motor operated valve 气动阀 pneumatic operated valve低温用阀 cryogenic service valve蒸汽疏水阀 steam trap机械式疏水阎 mechanical trap浮桶式疏水阀 open bucket trap, open top bucket trap浮球式疏水阀 float trap倒吊桶式疏水阀 inverted bucket trap自由浮球式疏水阀 loose float trap恒温式疏水阀 thermostatic trap金属膨胀式蒸汽疏水阀 metal expansion steam trap液体膨胀式蒸汽疏水阀 liquid expansion steam trap双金属膨胀式蒸汽疏水阀 bimetallic expansion steam trap压力平衡式恒温疏水阀 balanced pressure thermostatic trap热动力式疏水阀 thermodynamic trap脉冲式蒸汽疏水阀 impulse steam trap放气阀（自动放气阀） air vent valve (automatic air vent valve) （疏水阀用）平板式滑动闸阀 slab type sliding gate valve盖阀 flat valve换向阀 diverting valve, reversing valve热膨胀阀 thermo expansion valve自动关闭阀 self-closing gate valve自动排液阀 self-draining valve管道盲板阀 line-blind valve挤压阀 squeeze valve（用于泥浆及粉尘等）呼吸阀 breather valve风门、挡板 damper减压阀 pressure reducing valve, reducing valve控制阀 control valve膜式控制阀 diaphragm operated control valve执行机构 actuator背压调节阀 back pressure regulating valve差压调节阀 differential pressure regulating valve压力比例调节阀 pressure ratio regulating valve1.6.4 未指明结构（或阀型）的阀切断阀 block valve; shut-off valve; stop valve调节阀 regulating valve快开阀 quick opening valve快闭阀 quick closing valve隔断阀 isolating valve三通阀 three way valve夹套阔 jacketed valve非旋转式阀 non-rotary valve排污阀 blowdown valve集液排放阀 drip valve排液阀 drain valve放空阀 vent valve卸载阀 unloading valve排出阀 discharge valve吸入阀 suction valve多通路阀 multiport valve取样阀 sampling valve手动阀 hand-operated valve; manually operated valve锻造阀 forged valve铸造阀 cast valve（水）龙头 bibb; bib; faucet抽出液阀（小阀） bleed valve旁路阀 by-pass valve软管阀 hose valve混合阀 mixing valve破真空阀 vacuum breaker冲洗阀 flush valve第一道阀；根部阀 primary valve根部阀 root valve总管阀 header valve事故切断阀 emergency valve1.7 管道特殊件 Piping Specialty1.7.1 管道特殊件（组件）粗滤器 strainer过滤器 filter临时粗滤器（锥型） temporary strainer (cone type)y 型粗滤器 y-type strainerT型粗滤器 T-type strainer永久过滤器 permanent filter丝网粗滤器 gauze strainer洗眼器及淋浴器 eye washer and shower视镜 sight glass阻火器 flame arrester喷嘴；喷头 spray nozzle取样冷却器 sample cooler消声器 silencer膨胀节 expansion joint波纹膨胀节 bellow expansion joint单波 single bellow双波 double bellow多波 multiple bellow压力平衡式膨胀节 pressure balanced expansion带铰链膨胀节 hinged expansion joint轴向位移型膨胀节 axial movement type expansion joint自均衡膨胀节（外加强环）self-equalizing expansion joint 带接杆膨胀节 tied expansion joint万向型膨胀节 universal type expansion joint球形补偿器 ball type expansion joint填函式补偿器 slip type (packed type) expansion joint单向滑动填料函补偿器 single actionpacked slip joint1.7.2 管道特殊元件Piping Special Element软管接头 hose connection (HC)快速接头 quick coupling金属软管 metal hose橡胶管 rubber hose挠性管 flexible tube鞍形补强板 reinforcing saddles补强板 reinforcement pad特殊法兰 special flange漏斗 funnel排液环 drip ring排液漏斗 drain funnel插板 blank垫环 spacer8字盲板 spectacle blind; figure 8 blind限流孔板 restriction orifice爆破片 rupture disk法兰盖贴面 protective disc费托立克接头 victaulic coupling1.8 端部连接 End Connection法兰端 flanged end坡口端 beveled end (BE)对焊端 butt welded end平端 plain end (PE)承插焊端 socket welding end螺纹端 threaded end (TE)承口 bell end焊接端 welding end法兰连接（接头） flanged joint对焊连接（接头） butt welded joint螺纹连接，管螺纹连接 threaded joint, pipe threaded joint 锥管螺纹密封焊连接 seal-welded taper pipe threaded joint 承插焊连接（接头） socket welded joint承插连接（接头） bell and spigot joint环垫接头 ring joint (RJ)万向接头 universal joint软钎焊连接（接头） soldered joint搭接接头，松套连接 lapped joint外侧厚度切斜角 bevel for outside thickncss内侧厚度切斜角 bevel for inside thickness内外侧厚度切斜角 bevel for combined thickness法兰式的 flanged (FLGD)对焊的 butt welded (BW)螺纹的 threaded (THD)承插焊的 socket welded (SW)小端为平的 small end plain (SEP)大端为平的 large end plain (LEP)两端平 both ends plain (BEP)小端带螺纹 small end thread (SET)大端带螺纹 large end thread (LET)两端带螺纹 both end thread (BET)一端带螺纹 one end thread (OET)支管连接 branch connection焊接支管 branch pipe welded directly to the run pipe。
常用管道、阀门、材料中英文名称对照
常用管道、阀门、材料中英文名称对照目录1 管道组成件Piping component (1)1.1 管子Pipe (1)1.2 管件Fitting (2)1.3 弯管Bend (3)1.4 法兰Flange (FLG） (4)1.5 垫片Gasket (GSKT) (5)1.6 阀门Valve (6)1.7 管道特殊件Piping Specialty (10)1.8 端部连接End Connection (12)1 管道组成件Piping component1.1 管子Pipe管子(按照配管标准规格制造的) pipe管子(不按配管标准规格制造的其他用管) tube钢管steel pipe铸铁管cast iron pipe衬里管lined pipe复合管clad pipe碳钢管carbon steel pipe合金钢管alloy steel pipe不锈钢stainless steel pipe奥氏体不锈钢管austenitic stainless steel pipe 铁合金钢管ferritic alloy steel pipe轧制钢管wrought-steel pipe锻铁管wrought-iron pipe无缝钢管seamless (SMLS) steel pipe焊接钢管welded steel pipe电阻焊钢管electric-resistance welded steel pipe电熔（弧）焊钢板卷管electric-fusion (arc)-welded steel-plate pipe螺旋焊接钢管spiral welded steel pipe镀锌钢管galvanized steel pipe热轧无缝钢管hot-rolling seamless pipe冷拔无缝钢管cold-drawing seamless pipe水煤气钢管water-gas steel pipe塑料管plastic pipe玻璃管glass tube橡胶管rubber tube直管run pipe; straight pipe1.2 管件Fitting弯头elbow异径弯头reducing elbow带支座弯头base elbowk半径弯头long radius elbow短半径弯头short radius elbow长半径180°弯头long radius return短半径180°弯头short radius return带侧向口的弯头（右向或左向）side outlet elbow (right hand or left hand)双支管弯头（形）double branch elbow三通tee异径三通reducing tee等径三通straight tee带侧向口的三通（右向或左向）side outlet tee (right hand or 1eft hand)异径三通（分支口为异径）reducing tee (reducing on outlet) 异径三通（一个直通口为异径）reducing tee (reducing on one run)带支座三通base tee异径三通（一个直通口及分支口为异径）reducing tee (reducing on one run and outlet) 异径三通（两个直通口为异径，双头式）reducing tee (reducing on both runs, bull head) 45°斜三通45° lateral45°斜三通（支管为异径）45° lateral (reducing on branch)45°斜三通(一个直通口为异径) 45° lateral (reducing on one run) 45°斜三通(一个直通口及支管为异径) 45° lateral (reducing on one run and branch)Y型三通（俗称裤衩）true “Y”四通cross等径四通straight cross异径四通reducing cross异径四通（一个分支口为异径）reducing cross (reducing on one outlet)异径四通（一个直通口及分支口为异径）reducing cross (reducing on one run and outlet) 异径四通（两个分支口为异径）reducing cross (reducing on both outlet)异径四通（一个直通口及两个分支口为异径）reducing cross (reducing on one run and both outlet)异径管reducer同心异径管concentric reducer偏心异径管eccentric reducer锻制异径管reducing swage螺纹支管台threadolet焊接支管台weldolet承插支管台sockolet弯头支管台elbolet斜接支管台latrolet镶入式支管嘴sweepolet短管支管台nipolet支管台，插入式支管台boss管接头coupling, full coupling半管接头half coupling异径管接头reducing coupling活接头union内外螺纹缩接（俗称补芯）bushing管帽cap (C)堵头plug短节nipple异径短节reducing nipple; swage nipple1.3 弯管Bend预制弯管fabricated pipe bend跨越弯管（^ 形）cross-over bend偏置弯管（~ 形）offset bend90°弯管quarter bend环形弯管cirele bend单侧偏置90°弯管（? 形）single offset quarter bendS形弯管“S” bend单侧偏置U形膨胀弯管（| ?形）single offset “U” bend U形弯管“U” bend双偏置U膨胀弯管double offset expansion “U” bend 斜接弯管mitre bend三节斜接弯管3-piece mitre bend折皱弯管corrugated bend圆度roundness1.4 法兰Flange (FLG）整体管法兰integral pipe flange钢管法兰steel pipe flange螺纹法兰threaded flange滑套法兰（包括平焊法兰）slip-on flange (SO); slip-on welding flange 承插焊法兰socket welding flange松套法兰lap joint flange (LJF)对焊法兰welding neckflange (WNF)法兰盖blind flange, blind孔板法兰orifice flange异径法兰reducing flange盘座式法兰pad type flange松套带颈法兰loose hubbed flange焊接板式法兰welding plate flange对焊环welding neck collar （与stub end相似）平焊环welding-on collar突缘短节stub end, lap翻边端lapped pipe end松套板式法兰loose plate flange压力级pressure rating, pressure rating class压力—温度等级pressure-temperature rating法兰密封面，法兰面flange facing突面raised face (RF)凸面male face (MF)凹面female face (FMF)榫面tongue face槽面groove face环连接面ring joint face全平面；满平面flat face; full face (FF)光滑突面smooth raised face (SRF)法兰面加工facing finish粗糙度roughness光滑的smooth齿形serrated均方根root mean square (RMS)算术平均粗糙高度arithmetical average roughness height (AARH)配对法兰companion-flange螺栓圆bolt circle (B.C.)1.5 垫片Gasket (GSKT)垫片的型式type of gasket平垫片flat gasket环形平垫片flat ring gasket平金属垫片flat metal gasket夹棉织物的橡胶elastomer with cotton fabric insertion夹石棉织物的橡胶elastomer with asbestos fabric insertion夹石棉织物及金属丝加强的橡胶elastomer with asbestos fabric insertion and with wire reinforcement无石墨压缩白石棉垫片non graphited compressed white asbestos gasket天然白橡胶垫片natural white rubber gasket压缩石棉垫片compressed asbestos class gasket浸聚四氟乙烯的石棉垫片PTFE impregnated asbestos gasket 夹石棉的缠绕金属垫片spiral-wound metal gasket with asbestos filler内环inner ring外环，外定位环outer ring波纹金属垫片corrugated metal gasket波纹金属包嵌石棉垫片corrugated metal gasket with asbestos inserted双夹套波纹金属包石棉垫片corrugated metal double jacketed asbestos filled gasket 双夹套垫片double jacketed gasket 金属包石棉平垫片flat metal jacketed asbestos filled gasket整体金属齿形垫片solid metal serrated gasket槽形金属垫片grooved metal gasket环形连接金属垫片ring joint metal gasket八角环形垫片octagonal ring gasket椭圆环形垫片oval ring gasket透镜式垫片lens gasket非金属垫片non-metallic gasket1.6 阀门Valve1.6.1 阀门结构、零件阀轭yoke外螺纹阀杆及阀轭outside screw and yoke (OS & Y) 阀杆stem 内螺纹inside screw (IS)阀轭套yoke sleeve阀杆环stem ring阀座valve seat (body seat)阀座环、密封圈seat ring整体（阀）座integral seat堆焊（阀）座deposited seat阀芯（包括密封圈、杆等内件）trim阀盘disc阀盘密封圈disc seat阀体body阀盖bonnet阀盖衬套bonnet bush螺纹阀帽screw cap螺纹阀盖screw bonnet螺栓连接的阀盖bolted bonnet (BB)活接阀盖（帽）union bonnet (cap)螺栓连接的阀帽bolted cap (BC)焊接阀盖welded bonnet (WB)本体阀杆密封body stem seal石棉安全密封asbestos emenen seal倒密封back seal压力密封的阀盖pressure-tight bonnet动力操纵器powered operator电动操纵器electric motor operator气动操纵器pneumatic operator液压操纵器hydraulic operator快速操纵器quick-acting operator滑动阀杆sliding stem正齿轮传动spur gear operated伞齿轮传动bevel gear operated扳手操作wrench operated链轮chain wheel手轮hand wheel手柄hand lever (handle)气缸（或液压缸）操纵的cylinder operated链条操纵的chain operated等径孔道full bore; full port异径孔道reducing bore, reduced port,venturi port 短型short pattern紧凑型（小型）compact type笼式环lantern ring压盖gland阀杆填料stem packing阀盖垫片bonnet gasket升杆式（明杆）rising stem (RS)非升杆式（暗杆）non-rising stem (NRS)指示器/限位器indicator/stopper注油器grease injector可更换的阀座环renewable seat ring1.6.2 常用阀(1）闸阀gate valve平行双闸板double disc parallel seat开口楔形闸板split wedge挠性整体楔形闸扳flexible solid wedge整体楔形闸板solid wedge塞型闸阀plug gate valve直通型闸阀through conduit gate valve(2) 截止阀globe valve球心型阀盘globe type disc塞型阀盘plug type disc可转动的阀盘swivel disc(3) 节流闪阀throttle valve针阀needle valve(4) 角阀angle valve(5) Y型阀（Y 型阀体截止阀）Y-valve (Y-body globe valve)(6) 球阀ball valve三通球阀3-way ball valve装有底轴的trunnion mounted耐火型fire safe type浮动球型floating ball type防脱出阀杆blowout proof stem(7) 蝶阀butterfly valve对夹式（薄片型）wafer type凸耳式lug type偏心阀板蝶阀offset disc burerfly valve; eccentric butterfly valve 斜阀盘蝶阀canted disc butterfly valve连杆式蝶阀link butterfly valve8) 柱塞阀piston type valve(9) 旋塞阀plug valve三通旋塞阀three-way plug valve四通旋塞阀four-way plug valve旋塞cock衬套旋塞sleeve cock(10) 隔膜阀diaphragm valve橡胶衬里隔膜阀rubber lined diaphragm valve直通式隔膜阀straight way diaphragm valve堰式隔膜阀weir diaphragm valve(11) 夹紧式胶管阀pinch valve（用于泥浆、粉尘等）(12) 止回阀check valve升降式止回阀lift check valve旋启式止回阀swing check valve, flap check valve 落球式止回阀ball check valve弹簧球式止回阀spring ball check valve双板对夹式止回阀dual plate wafer type check valve 无撞击声止回阀non-slam cheek valve底阀foot valve切断式止回阀stop check valve; non-return valve活塞式止回阀piston check valve斜翻盘止回阀tilting disc check valve蝶式止回阀butterfly check valve1.6.3 其它用途的阀安全泄气阀safety valve (SV)安全泄液阀relief valve (RV)安全泄压阀safety relief valve杠杆重锤式lever and weight type引导阀操纵的安全泄气阀pilot operated safety valve 复式安全泄气阀twin type safety valve罐底排污阀flush-bottom tank valve电磁阀solenoid valve, solenoid operated valve电动阀electrically operated valve, electric-motor operated valve气动阀pneumatic operated valve低温用阀cryogenic service valve蒸汽疏水阀steam trap机械式疏水阎mechanical trap浮桶式疏水阀open bucket trap, open top bucket trap浮球式疏水阀float trap倒吊桶式疏水阀inverted bucket trap自由浮球式疏水阀loose float trap恒温式疏水阀thermostatic trap金属膨胀式蒸汽疏水阀metal expansion steam trap液体膨胀式蒸汽疏水阀liquid expansion steam trap双金属膨胀式蒸汽疏水阀bimetallic expansion steam trap压力平衡式恒温疏水阀balanced pressure thermostatic trap热动力式疏水阀thermodynamic trap脉冲式蒸汽疏水阀impulse steam trap放气阀（自动放气阀）air vent valve (automatic air vent valve) （疏水阀用）平板式滑动闸阀slab type sliding gate valve 盖阀flat valve换向阀diverting valve, reversing valve热膨胀阀thermo expansion valve自动关闭阀self-closing gate valve自动排液阀self-draining valve管道盲板阀line-blind valve挤压阀squeeze valve（用于泥浆及粉尘等）呼吸阀breather valve风门、挡板damper减压阀pressure reducing valve, reducing valve控制阀control valve膜式控制阀diaphragm operated control valve执行机构actuator背压调节阀back pressure regulating valve差压调节阀differential pressure regulating valve压力比例调节阀pressure ratio regulating valve1.6.4 未指明结构（或阀型）的阀切断阀block valve; shut-off valve; stop valve调节阀regulating valve快开阀quick opening valve快闭阀quick closing valve隔断阀isolating valve三通阀three way valve夹套阔jacketed valve非旋转式阀non-rotary valve排污阀blowdown valve集液排放阀drip valve排液阀drain valve放空阀vent valve卸载阀unloading valve排出阀discharge valve吸入阀suction valve多通路阀multiport valve取样阀sampling valve手动阀hand-operated valve; manually operated valve 锻造阀forged valve铸造阀cast valve（水）龙头bibb; bib; faucet抽出液阀（小阀）bleed valve旁路阀by-pass valve软管阀hose valve混合阀mixing valve破真空阀vacuum breaker冲洗阀flush valve第一道阀；根部阀primary valve根部阀root valve总管阀header valve事故切断阀emergency valve1.7 管道特殊件Piping Specialty1.7.1 管道特殊件（组件）粗滤器strainer过滤器filter临时粗滤器（锥型）temporary strainer (cone type)y 型粗滤器y-type strainerT型粗滤器T-type strainer永久过滤器permanent filter丝网粗滤器gauze strainer洗眼器及淋浴器eye washer and shower视镜sight glass阻火器flame arrester喷嘴；喷头spray nozzle取样冷却器sample cooler消声器silencer膨胀节expansion joint波纹膨胀节bellow expansion joint单波single bellow双波double bellow多波multiple bellow压力平衡式膨胀节pressure balanced expansion带铰链膨胀节hinged expansion joint轴向位移型膨胀节axial movement type expansion joint自均衡膨胀节（外加强环）self-equalizing expansion joint 带接杆膨胀节tied expansion joint万向型膨胀节universal type expansion joint球形补偿器ball type expansion joint填函式补偿器slip type (packed type) expansion joint单向滑动填料函补偿器single actionpacked slip joint1.7.2 管道特殊元件Piping Special Element软管接头hose connection (HC)快速接头quick coupling金属软管metal hose橡胶管rubber hose挠性管flexible tube鞍形补强板reinforcing saddles补强板reinforcement pad特殊法兰special flange漏斗funnel排液环drip ring排液漏斗drain funnel插板blank垫环spacer8字盲板spectacle blind; figure 8 blind限流孔板restriction orifice爆破片rupture disk法兰盖贴面protective disc费托立克接头victaulic coupling1.8 端部连接End Connection法兰端flanged end坡口端beveled end (BE)对焊端butt welded end平端plain end (PE)承插焊端socket welding end螺纹端threaded end (TE)承口bell end焊接端welding end法兰连接（接头）flanged joint对焊连接（接头）butt welded joint螺纹连接，管螺纹连接threaded joint, pipe threaded joint 锥管螺纹密封焊连接seal-welded taper pipe threaded joint 承插焊连接（接头）socket welded joint承插连接（接头）bell and spigot joint环垫接头ring joint (RJ)万向接头universal joint软钎焊连接（接头）soldered joint搭接接头，松套连接lapped joint外侧厚度切斜角bevel for outside thickncss内侧厚度切斜角bevel for inside thickness内外侧厚度切斜角bevel for combined thickness法兰式的flanged (FLGD)对焊的butt welded (BW)螺纹的threaded (THD)承插焊的socket welded (SW)小端为平的small end plain (SEP)大端为平的large end plain (LEP)两端平both ends plain (BEP)小端带螺纹small end thread (SET)大端带螺纹large end thread (LET)两端带螺纹both end thread (BET)一端带螺纹one end thread (OET)支管连接branch connection焊接支管branch pipe welded directly to the run pipe37。
法兰垫片中英文对照
[河北圣天管件]弯头法兰等管件中英文对照表弯头法兰管件中英文对照表1.2 管件 Fitting弯头 elbow异径弯头 reducing elbow带支座弯头 base elbow长半径弯头 long radius elbow短半径弯头 short radius elbow长半径180°弯头 long radius return短半径180°弯头 short radius return带侧向口的弯头（右向或左向） side outlet elbow (right hand or left hand)双支管弯头（形） double branch elbow三通 tee异径三通 reducing tee等径三通 straight tee带侧向口的三通（右向或左向） side outlet tee (right hand or 1eft hand)异径三通（分支口为异径） reducing tee (reducing on outlet)异径三通（一个直通口为异径）reducing tee (reducing on one run)带支座三通 base tee异径三通（一个直通口及分支口为异径） reducing tee (reducing on one run and outlet)异径三通（两个直通口为异径，双头式） reducing tee (reducing on both runs, bull head)45°斜三通 45° lateral45°斜三通（支管为异径） 45° lateral (reducing on branch)45°斜三通(一个直通口为异径) 45° lateral (reducing on one run)45°斜三通(一个直通口及支管为异径) 45° lateral (reducing on one run and branch)Y型三通（俗称裤衩） true “Y”四通 cross等径四通 straight cross异径四通 reducing cross异径四通（一个分支口为异径）reducing cross (reducing on one outlet)异径四通（一个直通口及分支口为异径） reducing cross (reducing on one run and outlet)异径四通（两个分支口为异径） reducing cross (reducing on both outlet)异径四通（一个直通口及两个分支口为异径） reducing cross (reducing on one run and both outlet) 异径管 reducer同心异径管 concentric reducer偏心异径管 eccentric reducer锻制异径管 reducing swage螺纹支管台 threadolet焊接支管台 weldolet承插支管台 sockolet弯头支管台 elbolet斜接支管台 latrolet镶入式支管嘴 sweepolet短管支管台 nipolet支管台，插入式支管台 boss管接头 coupling, full coupling半管接头 half coupling异径管接头 reducing coupling活接头 union内外螺纹缩接（俗称补芯） bushing管帽 cap (C)堵头 plug短节 nipple异径短节 reducing nipple; swage nipple1.3 弯管 Bend预制弯管 fabricated pipe bend跨越弯管（^ 形） cross-over bend偏置弯管（~ 形） offset bend90°弯管 quarter bend环形弯管 cirele bend单侧偏置90°弯管（? 形） single offset quarter bendS形弯管“S” bend单侧偏置U形膨胀弯管（| ?形） single offset “U” bendU形弯管“U” bend双偏置U膨胀弯管 double offset expansion “U” bend斜接弯管 mitre bend三节斜接弯管 3-piece mitre bend折皱弯管 corrugated bend圆度 roundness1.4 法兰 Flange (FLG）整体管法兰 integral pipe flange钢管法兰 steel pipe flange螺纹法兰 threaded flange滑套法兰（包括平焊法兰） slip-on flange (SO); slip-on welding flange 承插焊法兰 socket welding flange松套法兰 lap joint flange (LJF)对焊法兰 welding neckflange (WNF)法兰盖 blind flange, blind孔板法兰 orifice flange异径法兰 reducing flange盘座式法兰 pad type flange松套带颈法兰 loose hubbed flange焊接板式法兰 welding plate flange对焊环 welding neck collar （与stub end相似）平焊环 welding-on collar突缘短节 stub end, lap翻边端 lapped pipe end松套板式法兰 loose plate flange压力级 pressure rating, pressure rating class压力—温度等级 pressure-temperature rating法兰密封面，法兰面 flange facing突面 raised face (RF)凸面 male face (MF)凹面 female face (FMF)榫面 tongue face槽面 groove face环连接面 ring joint face全平面；满平面 flat face; full face (FF)光滑突面 smooth raised face (SRF)法兰面加工 facing finish粗糙度 roughness光滑的 smooth齿形 serrated均方根 root mean square (RMS)算术平均粗糙高度 arithmetical average roughness height (AARH)配对法兰 companion-flange螺栓圆 bolt circle (B.C.)1.5 垫片 Gasket (GSKT)垫片的型式 type of gasket平垫片 flat gasket环形平垫片 flat ring gasket平金属垫片 flat metal gasket夹棉织物的橡胶 elastomer with cotton fabric insertion夹石棉织物的橡胶 elastomer with asbestos fabric insertion夹石棉织物及金属丝加强的橡胶 elastomer with asbestos fabric insertion and with wire reinforcement无石墨压缩白石棉垫片 non graphited compressed white asbestos gasket天然白橡胶垫片 natural white rubber gasket压缩石棉垫片 compressed asbestos class gasket浸聚四氟乙烯的石棉垫片 PTFE impregnated asbestos gasket夹石棉的缠绕金属垫片 spiral-wound metal gasket with asbestos filler内环 inner ring外环，外定位环 outer ring波纹金属垫片 corrugated metal gasket波纹金属包嵌石棉垫片 corrugated metal gasket with asbestos inserted双夹套波纹金属包石棉垫片 corrugated metal double jacketed asbestos filled gasket双夹套垫片 double jacketed gasket金属包石棉平垫片 flat metal jacketed asbestos filled gasket整体金属齿形垫片 solid metal serrated gasket槽形金属垫片 grooved metal gasket环形连接金属垫片 ring joint metal gasket八角环形垫片 octagonal ring gasket椭圆环形垫片 oval ring gasket透镜式垫片 lens gasket非金属垫片 non-metallic gasket联系人：刘春晓Q Q ：1 6 1 0 9 7 5 9手机：1 3 9 3 0 73 9 82 6邮箱：1 6 1 0 9 7 5 9 @ q q . c o m网址：w w w . s h e n g – t I a n . n e t地址：中国河北沧州孟村回族自治县东河工业区注：河北圣天管件集团有限公司工厂部为您提供零风险售后承诺：如果您所采购的产品不符合合同规定的要求，我公司将无条件退换货物，并在第一时间发至客户工地。
钢管、管件、法兰和阀门等中英文对照(非常全的)
中英文对应（大全）1 管道组成件 Piping component1.1 管子 Pipe管子(按照配管标准规格制造的) pipe管子(不按配管标准规格制造的其他用管) tube钢管 steel pipe铸铁管 cast iron pipe衬里管 lined pipe复合管 clad pipe碳钢管 carbon steel pipe合金钢管 alloy steel pipe不锈钢 stainless steel pipe奥氏体不锈钢管 austenitic stainless steel pipe铁合金钢管 ferritic alloy steel pipe轧制钢管 wrought-steel pipe锻铁管 wrought-iron pipe无缝钢管 seamless (SMLS) steel pipe焊接钢管 welded steel pipe电阻焊钢管 electric-resistance welded steel pipe电熔（弧）焊钢板卷管 electric-fusion (arc)-welded steel-plate pipe螺旋焊接钢管 spiral welded steel pipe镀锌钢管 galvanized steel pipe热轧无缝钢管 hot-rolling seamless pipe冷拔无缝钢管 cold-drawing seamless pipe水煤气钢管 water-gas steel pipe塑料管 plastic pipe玻璃管 glass tube橡胶管 rubber tube直管 run pipe; straight pipe1.2 管件 Fitting弯头 elbow异径弯头 reducing elbow带支座弯头 base elbowk半径弯头 long radius elbow短半径弯头 short radius elbow长半径180°弯头 long radius return短半径180°弯头 short radius return带侧向口的弯头（右向或左向） side outlet elbow (right hand or left hand)双支管弯头（形） double branch elbow三通 tee异径三通 reducing tee等径三通 straight tee带侧向口的三通（右向或左向） side outlet tee (right hand or 1eft hand) 异径三通（分支口为异径） reducing tee (reducing on outlet)异径三通（一个直通口为异径）reducing tee (reducing on one run)带支座三通 base tee异径三通（一个直通口及分支口为异径） reducing tee (reducing on one run and outlet)异径三通（两个直通口为异径，双头式） reducing tee (reducing on both runs, bull head)45°斜三通45° lateral45°斜三通（支管为异径）45° lateral (reducing on branch)45°斜三通(一个直通口为异径) 45° lateral (reducing on one run)45°斜三通(一个直通口及支管为异径) 45° lateral (reducing on one run and branch)Y型三通（俗称裤衩）true “Y”四通 cross等径四通 straight cross异径四通 reducing cross异径四通（一个分支口为异径）reducing cross (reducing on one outlet) 异径四通（一个直通口及分支口为异径） reducing cross (reducing on one run and outlet)异径四通（两个分支口为异径） reducing cross (reducing on both outlet) 异径四通（一个直通口及两个分支口为异径） reducing cross (reducing on one run and both outlet)异径管 reducer同心异径管 concentric reducer偏心异径管 eccentric reducer锻制异径管 reducing swage螺纹支管台 threadolet焊接支管台 weldolet承插支管台 sockolet弯头支管台 elbolet斜接支管台 latrolet镶入式支管嘴 sweepolet短管支管台 nipolet支管台，插入式支管台 boss管接头 coupling, full coupling半管接头 half coupling异径管接头 reducing coupling活接头 union内外螺纹缩接（俗称补芯） bushing管帽 cap (C)堵头 plug短节 nipple异径短节 reducing nipple; swage nipple1.3 弯管 Bend预制弯管 fabricated pipe bend跨越弯管（^ 形） cross-over bend偏置弯管（~ 形） offset bend90°弯管 quarter bend环形弯管 circle bend单侧偏置90°弯管（? 形） single offset quarter bendS形弯管“S” bend单侧偏置U形膨胀弯管（| ?形）single offset “U” bendU形弯管“U” bend双偏置U膨胀弯管double offset expansion “U” bend斜接弯管 mitre bend三节斜接弯管 3-piece mitre bend折皱弯管 corrugated bend圆度 roundness1.4 法兰 Flange (FLG）整体管法兰 integral pipe flange钢管法兰 steel pipe flange螺纹法兰 threaded flange滑套法兰（包括平焊法兰） slip-on flange (SO); slip-on welding flange 承插焊法兰 socket welding flange松套法兰 lap joint flange (LJF)对焊法兰 welding neckflange (WNF)法兰盖 blind flange, blind孔板法兰 orifice flange异径法兰 reducing flange盘座式法兰pad type flange松套带颈法兰 loose hubbed flange焊接板式法兰welding plate flange对焊环 welding neck collar （与stub end相似）平焊环 welding-on collar突缘短节 stub end, lap翻边端 lapped pipe end松套板式法兰 loose plate flange压力级 pressure rating, pressure rating class压力—温度等级 pressure-temperature rating法兰密封面，法兰面 flange facing突面 raised face (RF)凸面 male face (MF)凹面 female face (FMF)榫面 tongue face槽面 groove face环连接面 ring joint face全平面；满平面 flat face; full face (FF)光滑突面 smooth raised face (SRF)法兰面加工 facing finish粗糙度 roughness光滑的 smooth齿形 serrated均方根 root mean square (RMS)算术平均粗糙高度 arithmetical average roughness height (AARH)配对法兰 companion-flange螺栓圆 bolt circle (B.C.)1.5 垫片 Gasket (GSKT)垫片的型式 type of gasket平垫片 flat gasket环形平垫片 flat ring gasket平金属垫片 flat metal gasket夹棉织物的橡胶 elastomer with cotton fabric insertion夹石棉织物的橡胶 elastomer with asbestos fabric insertion夹石棉织物及金属丝加强的橡胶 elastomer with asbestos fabric insertion and with wire reinforcement无石墨压缩白石棉垫片 non graphited compressed white asbestos gasket 天然白橡胶垫片 natural white rubber gasket压缩石棉垫片 compressed asbestos class gasket浸聚四氟乙烯的石棉垫片 PTFE impregnated asbestos gasket夹石棉的缠绕金属垫片 spiral-wound metal gasket with asbestos filler 内环 inner ring外环，外定位环 outer ring波纹金属垫片 corrugated metal gasket波纹金属包嵌石棉垫片 corrugated metal gasket with asbestos inserted 双夹套波纹金属包石棉垫片 corrugated metal double jacketed asbestos filled gasket双夹套垫片 double jacketed gasket金属包石棉平垫片 flat metal jacketed asbestos filled gasket整体金属齿形垫片 solid metal serrated gasket槽形金属垫片 grooved metal gasket环形连接金属垫片 ring joint metal gasket八角环形垫片 octagonal ring gasket椭圆环形垫片 oval ring gasket透镜式垫片 lens gasket非金属垫片 non-metallic gasket1.6 阀门 Valve1.6.1 阀门结构、零件阀轭 yoke外螺纹阀杆及阀轭 outside screw and yoke (OS & Y) 阀杆 stem内螺纹 inside screw (IS)阀轭套 yoke sleeve阀杆环 stem ring阀座 valve seat (body seat)阀座环、密封圈 seat ring整体（阀）座 integral seat堆焊（阀）座 deposited seat阀芯（包括密封圈、杆等内件） trim阀盘 disc阀盘密封圈 disc seat阀体 body阀盖 bonnet阀盖衬套 bonnet bush螺纹阀帽 screw cap螺纹阀盖 screw bonnet螺栓连接的阀盖 bolted bonnet (BB)活接阀盖（帽） union bonnet (cap)螺栓连接的阀帽 bolted cap (BC)焊接阀盖 welded bonnet (WB)本体阀杆密封 body stem seal石棉安全密封 asbestos emenen seal倒密封 back seal压力密封的阀盖 pressure-tight bonnet动力操纵器 powered operator电动操纵器 electric motor operator气动操纵器 pneumatic operator液压操纵器 hydraulic operator快速操纵器 quick-acting operator滑动阀杆 sliding stem正齿轮传动 spur gear operated伞齿轮传动 bevel gear operated扳手操作 wrench operated链轮 chain wheel手轮 hand wheel手柄 hand lever (handle)气缸（或液压缸）操纵的 cylinder operated链条操纵的 chain operated等径孔道 full bore; full port异径孔道 reducing bore, reduced port,venturi port短型 short pattern紧凑型（小型） compact type笼式环 lantern ring压盖 gland阀杆填料 stem packing阀盖垫片 bonnet gasket升杆式（明杆） rising stem (RS)非升杆式（暗杆） non-rising stem (NRS)指示器/限位器 indicator/stopper注油器 grease injector可更换的阀座环 renewable seat ring1.6.2 常用阀(1）闸阀 gate valve平行双闸板 double disc parallel seat开口楔形闸板 split wedge挠性整体楔形闸扳 flexible solid wedge整体楔形闸板 solid wedge塞型闸阀 plug gate valve直通型闸阀 through conduit gate valve(2) 截止阀 globe valve球心型阀盘 globe type disc塞型阀盘 plug type disc可转动的阀盘 swivel disc(3) 节流闪阀 throttle valve针阀 needle valve(4) 角阀 angle valve(5) Y型阀（Y 型阀体截止阀） Y-valve (Y-body globe valve)(6) 球阀 ball valve三通球阀 3-way ball valve装有底轴的 trunnion mounted耐火型 fire safe type浮动球型 floating ball type防脱出阀杆 blowout proof stem(7) 蝶阀 butterfly valve对夹式（薄片型） wafer type凸耳式 lug type偏心阀板蝶阀 offset disc burerfly valve; eccentric butterfly valve 斜阀盘蝶阀 canted disc butterfly valve连杆式蝶阀 link butterfly valve8) 柱塞阀 piston type valve(9) 旋塞阀 plug valve三通旋塞阀 three-way plug valve四通旋塞阀 four-way plug valve旋塞 cock衬套旋塞 sleeve cock(10) 隔膜阀 diaphragm valve橡胶衬里隔膜阀 rubber lined diaphragm valve直通式隔膜阀 straight way diaphragm valve堰式隔膜阀 weir diaphragm valve(11) 夹紧式胶管阀 pinch valve（用于泥浆、粉尘等）(12) 止回阀 check valve升降式止回阀 lift check valve旋启式止回阀 swing check valve, flap check valve落球式止回阀 ball check valve弹簧球式止回阀 spring ball check valve双板对夹式止回阀 dual plate wafer type check valve无撞击声止回阀 non-slam cheek valve底阀 foot valve切断式止回阀 stop check valve; non-return valve活塞式止回阀 piston check valve斜翻盘止回阀 tilting disc check valve蝶式止回阀 butterfly check valve1.6.3 其它用途的阀安全泄气阀 safety valve (SV)安全泄液阀 relief valve (RV)安全泄压阀 safety relief valve杠杆重锤式 lever and weight type引导阀操纵的安全泄气阀 pilot operated safety valve复式安全泄气阀 twin type safety valve罐底排污阀 flush-bottom tank valve电磁阀 solenoid valve, solenoid operated valve电动阀 electrically operated valve, electric-motor operated valve 气动阀 pneumatic operated valve低温用阀 cryogenic service valve蒸汽疏水阀 steam trap机械式疏水阎 mechanical trap浮桶式疏水阀 open bucket trap, open top bucket trap浮球式疏水阀 float trap倒吊桶式疏水阀 inverted bucket trap自由浮球式疏水阀 loose float trap恒温式疏水阀 thermostatic trap金属膨胀式蒸汽疏水阀 metal expansion steam trap液体膨胀式蒸汽疏水阀 liquid expansion steam trap双金属膨胀式蒸汽疏水阀 bimetallic expansion steam trap压力平衡式恒温疏水阀 balanced pressure thermostatic trap热动力式疏水阀 thermodynamic trap脉冲式蒸汽疏水阀 impulse steam trap放气阀（自动放气阀） air vent valve (automatic air vent valve) （疏水阀用）平板式滑动闸阀 slab type sliding gate valve盖阀 flat valve换向阀 diverting valve, reversing valve热膨胀阀 thermo expansion valve自动关闭阀 self-closing gate valve自动排液阀 self-draining valve管道盲板阀 line-blind valve挤压阀 squeeze valve（用于泥浆及粉尘等）呼吸阀 breather valve风门、挡板 damper减压阀 pressure reducing valve, reducing valve控制阀 control valve膜式控制阀 diaphragm operated control valve执行机构 actuator背压调节阀 back pressure regulating valve差压调节阀 differential pressure regulating valve压力比例调节阀 pressure ratio regulating valve1.6.4 未指明结构（或阀型）的阀切断阀 block valve; shut-off valve; stop valve调节阀 regulating valve快开阀 quick opening valve快闭阀 quick closing valve隔断阀 isolating valve三通阀 three way valve夹套阔 jacketed valve非旋转式阀 non-rotary valve排污阀 blowdown valve集液排放阀 drip valve排液阀 drain valve放空阀 vent valve卸载阀 unloading valve排出阀 discharge valve吸入阀 suction valve多通路阀 multiport valve取样阀 sampling valve手动阀 hand-operated valve; manually operated valve 锻造阀 forged valve铸造阀 cast valve（水）龙头 bibb; bib; faucet抽出液阀（小阀） bleed valve旁路阀 by-pass valve软管阀 hose valve混合阀 mixing valve破真空阀 vacuum breaker冲洗阀 flush valve第一道阀；根部阀 primary valve根部阀 root valve总管阀 header valve事故切断阀 emergency valve1.7 管道特殊件 Piping Specialty1.7.1 管道特殊件（组件）粗滤器 strainer过滤器 filter临时粗滤器（锥型） temporary strainer (cone type) y 型粗滤器 y-type strainerT型粗滤器 T-type strainer永久过滤器 permanent filter丝网粗滤器 gauze strainer洗眼器及淋浴器 eye washer and shower视镜 sight glass阻火器 flame arrester喷嘴；喷头 spray nozzle取样冷却器 sample cooler消声器 silencer膨胀节 expansion joint波纹膨胀节 bellow expansion joint单波 single bellow双波 double bellow多波 multiple bellow压力平衡式膨胀节 pressure balanced expansion带铰链膨胀节 hinged expansion joint轴向位移型膨胀节 axial movement type expansion joint自均衡膨胀节（外加强环）self-equalizing expansion joint 带接杆膨胀节 tied expansion joint万向型膨胀节 universal type expansion joint球形补偿器 ball type expansion joint填函式补偿器 slip type (packed type) expansion joint单向滑动填料函补偿器 single actionpacked slip joint1.7.2 管道特殊元件Piping Special Element软管接头 hose connection (HC)快速接头 quick coupling金属软管 metal hose橡胶管 rubber hose挠性管 flexible tube鞍形补强板 reinforcing saddles补强板 reinforcement pad特殊法兰 special flange漏斗 funnel排液环 drip ring排液漏斗 drain funnel插板 blank垫环 spacer8字盲板 spectacle blind; figure 8 blind限流孔板 restriction orifice爆破片 rupture disk法兰盖贴面 protective disc费托立克接头 victaulic coupling1.8 端部连接 End Connection法兰端 flanged end坡口端 beveled end (BE)对焊端 butt welded end平端 plain end (PE)承插焊端 socket welding end螺纹端 threaded end (TE)承口 bell end焊接端 welding end法兰连接（接头） flanged joint对焊连接（接头） butt welded joint螺纹连接，管螺纹连接 threaded joint, pipe threaded joint 锥管螺纹密封焊连接 seal-welded taper pipe threaded joint 承插焊连接（接头） socket welded joint承插连接（接头） bell and spigot joint环垫接头 ring joint (RJ)万向接头 universal joint软钎焊连接（接头） soldered joint搭接接头，松套连接 lapped joint外侧厚度切斜角 bevel for outside thickncss内侧厚度切斜角 bevel for inside thickness内外侧厚度切斜角 bevel for combined thickness法兰式的 flanged (FLGD)对焊的 butt welded (BW)螺纹的 threaded (THD)承插焊的 socket welded (SW)小端为平的 small end plain (SEP)大端为平的 large end plain (LEP)两端平 both ends plain (BEP)小端带螺纹 small end thread (SET)大端带螺纹 large end thread (LET)两端带螺纹 both end thread (BET)一端带螺纹 one end thread (OET)支管连接 branch connection焊接支管 branch pipe welded directly to the run pipe2007-3-5 23:45 admin2 管道用紧固件及螺纹2.1 紧固件螺栓 bolt六角头螺栓 hexagonal head bolt方头螺栓 square head bolt螺柱，双头螺栓 stud bolt环头螺检 eye bolt沉头螺栓 countersunk (head) screw地脚螺栓 anchor bolt; foundation bolt松紧螺旋扣（花篮螺丝） turnbuckleU形螺栓 U-boltT形螺栓 T-bolt圆头螺钉 round head bolt机螺栓，机螺钉 maehine bolt顶开螺栓，顶起螺栓 Jack screw自攻螺钉 self tapping screw膨胀螺栓 expansion bolt粗制的 coarse精制的 finished, fine螺母 nut六角螺母 hexagonal nut方螺母 square nut蝶形螺母 wing nut扁螺母 flat nut锁紧螺母 lock nut垫圈 washer平垫圈 plain washer球面垫圈 spherical washer弹簧垫圈 spring washer方垫圈 square washer斜垫圈 slant washer销轴 pinned shan销 pin开口销 cotter pin定位销 dowel pin带孔销 pin with hole圆锥销 taper pin铆钉 rivet键 key2.2 螺纹左螺纹left hand thread右螺纹 right hand thread管螺纹 pipe thread锥管螺纹 taper pipe thread直管螺纹straight pipe thread梯形螺纹 trapezoid thread螺距pitch of thread粗牙螺纹coarse thread细牙螺纹 fine thread特细牙螺纹extra fine thread通长螺纹full thread惠氏螺纹whitworth thread公制螺纹 metric ibread美国标准锥管螺纹 American standard taper pipe thread (NPT) 螺孔 tap3 材料、型钢及填料3.1 金属材料3.1.1 黑色金属 Ferrous Metal碳素钢 carbon steel (CS)低碳钢 low-carbon steel中碳钢 medium-carbon steel高碳钢 high-carbon steel普通碳素钢 general carbon steel优质碳素钢 high-quality carbon steel普通低合金结构钢 general structure low-alloy steel 合金结构钢 structural alloy steel合金钢 alloy steel低合金钢 low alloy steel中合金钢 medium alloy steel高合金钢 high alloy steel耐热钢 heat resisting steel高强度钢 high strength steel复合钢 clad steel工具钢 tool steel弹簧钢 spring steel钼钢 molybdenum steel镍钢 nickel steel铬钢 chromium steel铬钼钢 chrome-molybdenum steel铬镍钢 chromium-nickel steel,chrome-nickel steel 不锈钢 stainless steel (S.S.)奥氏体不锈钢 Austenitic stainless steel马氏体不锈钢 Martensitic stainless steel司特来合金（钨铬钴台金） Stellite耐蚀耐热镍基合金 Hastelloy铬镍铁合金 inconel耐热铬镍铁合金 incoloy20合金 20 alloy平炉钢（马丁钢） Martin steel镇静钢 killed steel半镇静钢 semi-killed steel沸腾钢 rimmed steel; rimming steel; open-steel锻钢 forged steel铸钢 cast steel铸铁 cast iron (C.I.)灰铸铁 grey cast iron可锻铸铁 malleable iron (MI)球墨铸铁 nodular cast iron; nodular graphite iron 生铁 pig iron熟铁，锻铁 wrought iron铸件 casting高硅铸铁 high silicon cast iron3.1.2 镀层及制造方法渗铬钢，镀铬钢 chromized steel镀铬的 chromium-plated, chrome-plated 镀层 plating锻造，型钢 swage锻造的，锻造 forging轧制 rolling热轧 hot rolling冷轧 cold rolling挤压 extruding冷加工 cold working热加工 hot working拔制 drawing3.1.3 有色金属Non-ferrous Metal铝 aluminum铜，紫铜 copper黄铜 brass青铜 bronze铝青铜 aluminum bronze磷青铜 phosphor bronze铝镁合金 aluminum magnesium锰青铜 manganese bronze蒙乃尔（注：镍及铜合金） Monel镍铜台金 nickel copper alloy非铁合金 nonferrous alloy钛 titanium铅 lead硬铅 hard lead3.1.4 材料性能极限强度 ultimate strength抗拉强度 tensile strength屈服极限 yield limit屈服点 yield point延伸率 percentage elongation抗压强度 compressive strength抗弯强度 bending strength弹性极限 elastic limit冲击值 impact value疲劳极限 fatigue limit蠕变极限 creep limit持久极限 endurance limit布氏硬度 Brinell hardness洛氏硬度 Rockwell hardness维氏硬度 Vickers diamond hardness, diamond penetrator hardness 蠕变断裂强度 creep rupture strength断面收缩率 reduction of area韧性 toughess脆性 brittleness延性 ductility冷脆 cold shortness冷流 cold flow3.2 非金属材料 Non-metallic Material塑料 plastic丙烯腈—丁二烯—苯乙烯 acrylonitrile-butadiene-styrene (ABS) 聚乙烯 polyethylene (PE)聚氯乙烯 polyvinyl chloride (PVC)苯乙烯橡胶 styrene-rubber (SR)聚丁烯 polybutylene (PB)聚丙烯 polypropylene (PP)聚苯乙烯 polystyrene (PS)氯化聚醚 chlorinated polyether (CPE)聚酰胺 polyamide (PA)聚碳酸酯 polycarbonate (PC)聚甲基丙烯酸甲酯 polymethyl methacrylate (PMMA)醋酸丁酸纤维素cellulose acetate butyrate (CAB)氯化聚氯乙烯 chlorinated polyvinyl chloride (CPVC)聚偏二氟乙烯 polyvinylidene fluoride (PVDF)缩醛塑料 acetal plastic尼龙塑料 nylon plastic聚烯烃 polyolefin (PO)石墨酚醛塑料 graphite phenolic plastics聚四氟乙烯 polytetrafluoroethylene (PTFE)纤维增强热塑性塑料 fiber reinforced thermoplastics热塑性塑料 thermoplastic热固性塑料 thermosetting plastics胶粘剂 adhesive溶剂胶接剂 solvent cement树脂 resin环氧树脂 epoxy, epoxy resin聚酯树脂 polyester resin聚酯纤维 polyester fibers氟塑料 fluoroplastics聚氨基甲酸酯 polyurethane丙烯酸树脂 acrylic resin脲醛树脂 urea resin呋哺树脂 furan resin乙烯丙烯二烃单体 ethylene propylene diene monomer (EPDM) 合成橡胶 synthetic rubber橡胶 rubber丁腈橡胶 nitrile butadiene rubber氯丁橡胶 neoprene天然橡胶 natural rubber乙丙橡胶 ethylene propylene rubber (EPR)玻璃 glass硼硅玻璃 borosilicate glass耐火砖 fire brick陶瓷 ceramic搪瓷 porcelain enamel木材 wood3.3 型材型钢 shaped steel, section steel, swage角钢 angle steel槽钢 channel工字钢 I-beam宽缘工字钢或H钢 wide flanged beamT型钢 T-bar方钢 square bar扁钢 flat bar角钢 hexagonal steel bar圆钢 round steel; rod钢带 strap steel钢板 plate网纹钢板 checkered plate腹板（指型钢的立板） web翼缘（指型钢的缘） wing3.4 填料及填料函填料 packing石棉绳 asbestos rope, asbestos cord．O形环 O-ring自密封 self-sealing四氟带 Teflon tap带铬镍合金丝的石棉绳 asbestos rope with inconel wire, inconel wire asbestos浸聚四氟乙烯的石棉填料 Teflon impregnated asbestos packing金属填料 metallic stuffing填料箱，填料函 packing box, stuffing box填料函压盖 stuffing box gland2007-3-5 23:45 admin4 管道等级及材料统计4.1 管道材料规定 Piping Material Specification管道等级 piping class; piping classification管道等级号 class designation公称直径 nominal diameter (DN); nominal (pipe) size公称压力 nominal pressure (PN)压力级，等级，类别 class (CL)低压 low pressure (L.P.)中压 medium pressure (M.P.)高压 high pressure (H.P.)大气压 atmosphere (ATM)真空 vacuum工作压力 operating pressure; working pressure设计压力 design pressure工作温度 operating temperature设计温度 design temperature环境温度 ambient temperature腐蚀裕量 corrosion allowance管道附件 piping attachment管道元件 piping element壁厚 wall thickness (WT)壁厚系列号 schedule number (SCH. No.)加厚的，加强的 extra heavy, extra strong双倍加厚的，双倍加强的 double extra heavy, double extra strong通用连接组 typieal installation分组（类）形式（如管道等级表） block form数据库 data base文件 file4.2 材料统计 Material Take-off (MTO)汇总表 summary sheet材料表 bill of material (BM)综合管道材料表 consolidated piping material summary sheet (CPMSS) 统计材料准确度 accuracy of take-off材料情况报告 material status report (MSR)散装材料 bulk material编位号的 itemized代码 code number短代码 short code数量 quantity (QTY)重力 weight净重 net weight毛重 gross weight2007-3-5 23:46 admin5 设备布置及管道布置Plot Plan and Piping Layout,Equipment and Piping Arrangement5.1 设备名称 Equipment Name5.1.1 容器 Vessel(1) 塔 tower, column洗涤塔 scrubber吸收塔 absorber冷却塔 cooling tower精馏塔 fractionating tower蒸馏塔 distillation tower再生塔 regenering tower造粒塔 prflling tower汽提塔 stripper脱气塔 degasifier合成塔 synthesis tower(2) 反应器 reactor聚台釜 polymerizer转化器，变换器 converter脱硫反应器 desulphurization reactor甲烷化器 methanator(3) 气柜 gas-holder螺旋式气柜 helical gas-holder湿式气柜 wet gas-holder干式气柜 dry gas-holder(4) 槽罐贮罐 tank; storage tank缓冲罐 knock out drum球罐 spheroid, spherical tank罐 drum接受槽 receiver计量槽 measuring tank加料槽 feed tank排污罐 blow down tank闪蒸罐 flash drum汽包 steam drum溶液贮槽 solution storage tank地下槽 sloptank(5) 其它设备分离器 separator旋风分离器 cyclone分子筛 molecular sieve脱氧器 deaerator搅拌器 agitator干燥器 dryer混合器 mixer萃取器 extractor结晶器 crystallizer澄清器 gravity settler净化器 purifier气化器 vaporizer吸附器 adsorber融解槽 melter减温器 desuperheater升压器 booster喷射器 ejector喷头 sprayer火炬 flare消声器 silencer(6) 换热器、加热器、冷却器换热器 heat exchanger空冷器 air cooler水冷却器 water cooler冷凝器 condenser螺旋板式换热器 spiral plate heat exchanger 蒸发器 evaporator再沸器 reboiler急冷器 quencher深冷器 chiller预热器 preheater再热器 reheater加热器 heater电加热器 electric heater过热器 super heater给水加热器 feed water heater中间冷却器 inter cooler后冷却器 after cooler5.1.2 工业炉及锅炉炉子 furnace烧嘴 burner锅炉 boiler烟囱 stack废热锅炉 waste heat boiler辅助锅炉 auxiliary boiler省煤器 economizer回热炉 direct-fired heater辐射段 radiant section对流段 convection section裂化炉 reformer焚烧炉 incinerator回转窑 rotary kiln炉管 furnace tube吹灰器 soot blower观察孔 observation door, peep door防爆门 explosion door5.2 辅助用房名称5.2.1 生产用房分析室 analyzer room变压器室 transformer room配电室，变电所 substation, switch room 蓄电池室 battery room控制室 control room通风室 ventilating room贮藏室 storage room维修间 maintenance room办公室 office5.2.2 生活用房更农室 locker room盥洗室，厕所 closet, lavatory, toilet5.3 图名管道布置平面 piping arrangement plan (PAP)管道布置 piping layout轴测图 isometric drawing分区索引图 key plan初版设备布置图（“A”版）preliminary plot plan ( “A” issue)内部审查版设备布置图（“B”版）inrernal approval plot plan ( “B” issue)用户审查版设备布置图（“C”版) owner approval plot plan ( “C” issue)确认版设备布置图（“D”版）confirm plot plan ( “D” issue)研究版设备布置图（“e”版）planning plot plan ( “E” issue)设计版设备布置图（“F”）designing plot plan ( “F” issue)施工版设备布置图（“G”版）construction plot plan ( “G” issue)5.4 厂房、站、单元压缩机房 compressor house (room)泵房 pump house (room)洗眼站 eye washer station泡沫站 foam station软管站，公用工程站 hose station (HS), utility station成套设备 package unit设施 facilities罐区 tank yard空分装置 air separation facility5.5 设备布置设备位号 equipment item number工厂 plant工厂区界 plant limit项目区界内侧 inside battery limit (I.S.B.L.)项目区界 batterylimit (BL)区界 area limit区域边界 zone iimit界外 off site东 east (E)西 west (W)南 south (S)北 north (N)上 up下 down工厂北向 plant north真实北向 true north道路 road小过道 cat walk, cat way走道，过道 walk way, gangway, access way 污水坑（井） sump pit集水池 catch basin沟槽 through预留区 trough场地 future area铺砌区 paving area非铺砌区 unpaved area碎石铺面 gravel paving橡皮铺面 rubber paving面积，区域 area体积，容积 volume (VOL)5.6 管道布置管道设计 piping design管道研究 piping study走向研究 routing study重要管道 critical piping地上管道 above ground piping地下管道 under ground piping管网 network of pipes管廊 pipe rack管沟 piping trench管间距 line spacing管道跨距 line span总管 header, manifold旁路 by pass排液 drain放空 vent上升管，垂直管 riser导管 canduit裸管 bare iine管件直接 fitting to fitting (FTF)管段，接口 spool piece, spool取样接口 sampling connection集液包 drip leg伴热管 tracing pipe蒸汽伴热 steam tracing热水伴热 hot-water tracing电伴热 electrical tracing夹套管 jacketed line, jacketed piping全夹套的 full jacketed平面 plan详图 detail“ ”视图X view “X”“ ”剖视A-A section “A-A”连接图 hook up drawing接续图 continue on drawing (COD)接续线 match line (M.L.)比例 scale图例 legend符号 symbol管口表 list of nozzles方位 orientation管口方位 nozzle orientation定位 location相交 intersection水平的 horizontal垂直的，立式的 vertical垂直，正交，垂直的 perpendicular平行，平行的 parallel水平安装 horizontal installation垂直安装 vertical installafion对称的 symmetric相反（的），对面（的） opposite顺时针方向 clock wise逆时针方向 counter clock wise计算机辅助设计 computer aided design (CAD) 5.7 图面标注绝对标高 abselute elevation海平面标高 over-sea mean level (OSL)标高，立面 elevation (EL)混凝土顶面 top of concrete架顶面 top of support (TOS)钢结构顶面 top of steel梁项面 top of beam (TOB)支撑点 point of suppon (POS)管顶 top of pipe (TOP)管底 bouom of pipe (BOP)沟底 boaom of trench管子内底 invert (inside bottom of pipe) 底平 flat on bottom (FOB)顶平 flat on top (FOT)工作点 working point (W.P.)面至面 face to face (F-F)中心至端面 center to end (C-E)中心至面 center to face (C-F)中心至中心，中至中 center to center (C-C) 坐标 coordinate坐标原点 origin of coordinate出口中心线 center line of discharge入口中心线 center line of suction中心线 centerline (CL)入口 inlet, suction出口 outlet, discharge排出口 exhaust距离 distance5.8 相关专业的专业词汇5.8.1 工艺(1) 图及表流程图 flow diagram工艺流程图 process flow diagram (PFD)管道及仪表流程图 piping andinstrument flow diagram (PID)公用工程流程图 utility flow diagram (UFD) 管线表 line list; line schedule命名表；管道表 nomenclature设备表 equipment list (schedule)(2) 流体 fluid空气 air仪表空气 instrument air工艺空气 process air低压蒸汽 low pressure steam中压蒸汽 medium pressure steam高压蒸汽 high pressure steam伴热蒸汽 tracing steam饱和蒸汽 saturated steam过热蒸汽 superheated steam氧气 oxygen氢气 hydrogen氮气 nitrogen燃料气 fuel gas天然气 natural gas火炬气 flare gas酸性气 sour gas液化石油气 liquefired petroleum gas (LPG) 氨气 ammonia gas冷却水 cooling循环水 circulating water锅炉给水 boiler feed water热水 hot water蒸汽冷凝水 steam condensate盐水 brine工艺水 process water化学污水 chemical sewage防腐剂 corrosion inhibitor重油 heavy oil石脑油 naphtha燃料油 fuel oil润滑油 lubricating oil密封油 sealing oil冷冻剂 refrigerant载热体 heating medium溶剂 solvent溶液 solution母液 mother liquor单体 monomer聚合物 polymer均聚物 homopolymer共聚物 copolymer工艺液体 process liquid工艺气体 process gas硫酸 sulphuric acid盐酸 chlorhydric acid硝酸 nitric acid烧碱 caustic soda(3) 流体特性 fluid characteristics蒸汽压 vapor pressure临界温度 critical temperature临界点 critical point临界压力 critical pressure比热 specific heat湿度 humidity密度 density比重 specific gravity粘度 viscosity闪点 flash point融点 melting point凝固点 freezing point浓度 concentration爆炸极限 limit of explosion有毒的 toxic可燃的；易燃的 flammable(4) 其它回收 recovery再生 regeneration循环 cireulatlon再循环；再生 recycle补充 make-up制备 preparation蒸汽吹扫 steaming out吹扫 purge抽空；排空 evacuation吹出 blow-off排污 blow down破真空 vacuum breaker大气腿 barometric leg备用 stand-by化学清洗 chemical cleaning净正吸入压头 net positive suction head (NPSH) 进料 feed成品 product污染 contamination大气污染 atmospheric pollution环境温度 ambient temperature5.8.2 建筑、结构建筑物 building钢结构 steel structure已有钢结构 existing steel structure钢筋混凝土结构 reinforced concrete construction 楼面 floor平台 platform (PF)地面 ground level栏杆 handrail楼梯 stair; stair way直梯 ladder柱 column; post; stanchion基础 foundation; footing粱 beam斜撑；支撑 bracing桁架；主粱 girder构件 member隔墙 partition wall墙 wall篦子板 grate; grating吊装孔 erection opening吊梁 hoisting beam棚 shelter窗 window天窗 skylight门 door防火门 fire door地漏 floor drain防火层 fire-proofing总图 general plot plan路肩 shoulder桩 pile灌浆 grouting风荷载 wind load雪荷载 snow load动力荷载 dynamic load静荷载 dead load活荷载 live load风速 wind velocity主导风向 most frequent wind direction5.8.3 仪表盘（操作盘） panel就地盘 local panel仪表盘 instrument panel常开 normally open常闭 normally closed电缆槽（架） cable tray (channel); cable rack 仪表电缆槽（架） instrument cable tray (duct) 压力计 manometer; pressure gauge热电偶 thermocouple温度计 thermometer液位计 level gauge玻璃液位计 gage glass温度计保护管 thermowell流量计 flow meter孔板 orifice变送器 transmitter联锁 interlock仪器；设备 apparatus仪器分析 instrumental analysis自动分析 automatic analysis气体分析 gas analysis化学分析 chemical analysis气相色谱仪 gas chromatograph液相色谱仪 liquid chromatograph质谱分析 mass spectrometric analysis5.8.4 电气危险区划分 hazardous area classification 危险区平面图 hazardous area plan电气盘 electrical panel配电盘 switch board电缆沟 cable trench电流 current直流 direct current交流 alternating current频率 frequency相位 phase功率因数 power factor电压 voltage电阻 resistance电容 capacitance静电 static electricity接地 grounding; easthing照明 lighting; illumination避雷针 lightning preventer电话 telephone电线 wire接线箱（盒） junction box导线管 conduit tube5.8.5 设备。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
一、美国美标管件标准美国标准ASME/ANSI 工厂制造的锻钢对焊管件ASME/ANSI 承插焊和螺纹锻造管件ASME/ANSI 钢制对焊小半径弯头和回头弯ASME 管法兰和法兰配件MSS SP-43 锻制不锈钢对焊管件MSS SP-83 承插焊和螺纹活接头MSS SP-97 承插焊、螺纹和对焊端的整体加强式管座二、垫片 Gasket (GSKT)垫片的型式 type of gasket平垫片 flat gasket环形平垫片 flat ring gasket平金属垫片 flat metal gasket夹棉织物的橡胶 elastomer with cotton fabric insertion夹石棉织物的橡胶 elastomer with asbestos fabric insertion夹石棉织物及金属丝加强的橡胶 elastomer with asbestos fabric insertion and with wire reinforcement无石墨压缩白石棉垫片 non graphited compressed white asbestos gasket天然白橡胶垫片 natural white rubber gasket压缩石棉垫片 compressed asbestos class gasket浸聚四氟乙烯的石棉垫片 PTFE impregnated asbestos gasket夹石棉的缠绕金属垫片 spiral-wound metal gasket with asbestos filler内环 inner ring外环，外定位环 outer ring波纹金属垫片 corrugated metal gasket波纹金属包嵌石棉垫片 corrugated metal gasket with asbestos inserted双夹套波纹金属包石棉垫片 corrugated metal double jacketed asbestos filled gasket双夹套垫片 double jacketed gasket金属包石棉平垫片 flat metal jacketed asbestos filled gasket整体金属齿形垫片 solid metal serrated gasket槽形金属垫片 grooved metal gasket环形连接金属垫片 ring joint metal gasket八角环形垫片 octagonal ring gasket椭圆环形垫片 oval ring gasket透镜式垫片 lens gasket非金属垫片 non-metallic gasket三、各种法兰管件中英文对照表法兰 Flange (FLG）整体管法兰 integral pipe flange钢管法兰 steel pipe flange螺纹法兰 threaded flange滑套法兰（包括平焊法兰） slip-on flange (SO); slip-on welding flange 承插焊法兰 socket welding flange松套法兰 lap joint flange (LJF)对焊法兰 welding neckflange (WNF)法兰盖 blind flange, blind孔板法兰 orifice flange异径法兰 reducing flange盘座式法兰 pad type flange松套带颈法兰 loose hubbed flange焊接板式法兰 welding plate flange对焊环 welding neck collar （与stub end相似）平焊环 welding-on collar突缘短节 stub end, lap翻边端 lapped pipe end松套板式法兰 loose plate flange压力级 pressure rating, pressure rating class压力—温度等级 pressure-temperature rating法兰密封面，法兰面 flange facing突面 raised face (RF)凸面 male face (MF)凹面 female face (FMF)榫面 tongue face槽面 groove face环连接面 ring joint face全平面；满平面 flat face; full face (FF)光滑突面 smooth raised face (SRF)法兰面加工 facing finish粗糙度 roughness光滑的 smooth齿形 serrated均方根 root mean square (RMS)算术平均粗糙高度 arithmetical average roughness height (AARH)配对法兰 companion-flange螺栓圆 bolt circle .)四管道特殊件 Piping Specialty1.7.1 管道特殊件（组件）粗滤器 strainer过滤器 filter临时粗滤器（锥型） temporary strainer (cone type)y 型粗滤器 y-type strainerT型粗滤器 T-type strainer永久过滤器 permanent filter丝网粗滤器 gauze strainer洗眼器及淋浴器 eye washer and shower视镜 sight glass阻火器 flame arrester喷嘴；喷头 spray nozzle取样冷却器 sample cooler消声器 silencer膨胀节 expansion joint波纹膨胀节 bellow expansion joint单波 single bellow双波 double bellow多波 multiple bellow压力平衡式膨胀节 pressure balanced expansion带铰链膨胀节 hinged expansion joint轴向位移型膨胀节 axial movement type expansion joint自均衡膨胀节（外加强环）self-equalizing expansion joint 带接杆膨胀节 tied expansion joint万向型膨胀节 universal type expansion joint球形补偿器 ball type expansion joint填函式补偿器 slip type (packed type) expansion joint单向滑动填料函补偿器 single actionpacked slip joint管道特殊元件Piping Special Element软管接头 hose connection (HC)快速接头 quick coupling金属软管 metal hose橡胶管 rubber hose挠性管 flexible tube鞍形补强板 reinforcing saddles补强板 reinforcement pad特殊法兰 special flange漏斗 funnel排液环 drip ring排液漏斗 drain funnel插板 blank垫环 spacer8字盲板 spectacle blind; figure 8 blind限流孔板 restriction orifice爆破片 rupture disk法兰盖贴面 protective disc费托立克接头 victaulic coupling端部连接 End Connection法兰端 flanged end坡口端 beveled end (BE)对焊端 butt welded end平端 plain end (PE)承插焊端 socket welding end螺纹端 threaded end (TE)承口 bell end焊接端 welding end法兰连接（接头） flanged joint对焊连接（接头） butt welded joint螺纹连接，管螺纹连接 threaded joint, pipe threaded joint 锥管螺纹密封焊连接 seal-welded taper pipe threaded joint 承插焊连接（接头） socket welded joint承插连接（接头） bell and spigot joint环垫接头 ring joint (RJ)万向接头 universal joint软钎焊连接（接头） soldered joint搭接接头，松套连接 lapped joint外侧厚度切斜角 bevel for outside thickncss内侧厚度切斜角 bevel for inside thickness内外侧厚度切斜角 bevel for combined thickness法兰式的 flanged (FLGD)对焊的 butt welded (BW)螺纹的 threaded (THD)承插焊的 socket welded (SW)小端为平的 small end plain (SEP)大端为平的 large end plain (LEP)两端平 both ends plain (BEP)小端带螺纹 small end thread (SET)大端带螺纹 large end thread (LET)两端带螺纹 both end thread (BET)一端带螺纹 one end thread (OET)支管连接 branch connection焊接支管 branch pipe welded directly to the run pipe五、管件 Fitting弯头 elbow异径弯头 reducing elbow带支座弯头 base elbowk半径弯头 long radius elbow短半径弯头 short radius elbow长半径180°弯头 long radius return短半径180°弯头 short radius return带侧向口的弯头（右向或左向）side outlet elbow (right hand or left hand)双支管弯头（形） double branch elbow三通 tee异径三通 reducing tee等径三通 straight tee带侧向口的三通（右向或左向）side outlet tee (right hand or 1eft hand)异径三通（分支口为异径）reducing tee (reducing on outlet)异径三通（一个直通口为异径）reducing tee (reducing on one run)带支座三通 base tee异径三通（一个直通口及分支口为异径） reducing tee (reducing on one run and outlet)异径三通（两个直通口为异径，双头式） reducing tee (reducing on both runs, bull head)45°斜三通45° lateral45°斜三通（支管为异径）45° lateral (reducing on branch)45°斜三通(一个直通口为异径) 45° lateral (reducing on one run)45°斜三通(一个直通口及支管为异径) 45° lateral (reducing on one run and branch)Y型三通（俗称裤衩）true “Y”四通 cross等径四通 straight cross异径四通 reducing cross异径四通（一个分支口为异径）reducing cross (reducing on one outlet)异径四通（一个直通口及分支口为异径） reducing cross (reducing on one run and outlet)异径四通（两个分支口为异径）reducing cross (reducing on both outlet)异径四通（一个直通口及两个分支口为异径） reducing cross (reducing on one run and both outlet)异径管 reducer同心异径管 concentric reducer偏心异径管 eccentric reducer锻制异径管 reducing swage螺纹支管台 threadolet焊接支管台 weldolet承插支管台 sockolet弯头支管台 elbolet斜接支管台 latrolet镶入式支管嘴 sweepolet短管支管台 nipolet支管台，插入式支管台 boss管接头 coupling, full coupling半管接头 half coupling异径管接头 reducing coupling活接头 union内外螺纹缩接（俗称补芯） bushing管帽 cap (C)堵头 plug短节 nipple异径短节 reducing nipple; swage nipple弯管 Bend预制弯管 fabricated pipe bend跨越弯管（^ 形） cross-over bend偏置弯管（~ 形） offset bend90°弯管 quarter bend环形弯管 cirele bend单侧偏置90°弯管（形） single offset quarter bendS形弯管“S” bend单侧偏置U形膨胀弯管（| 形）single offset “U” bendU形弯管“U” bend双偏置U膨胀弯管 double offset expansion “U” bend斜接弯管 mitre bend三节斜接弯管 3-piece mitre bend折皱弯管 corrugated bend圆度 roundness。