上网发布气动阀门 气动执行器 说明书 防爆电动执行机构 合格证 TORKMAX
ACTUATECH气动执行器说明书
INSTRUCTION MANUALPart turn pneumatic actuatorwith Manual Override-Complete aluminium protection versionGDV60 - GDV3840 GSV30 – GSV19201)GENERAL FEATURES………………………………………………………………………………………………..pg.32)DATASHEET……………………………………………………………………………………………..pg.43)FUNCTIONAL DESCRIPTION……………………………………………..………….…………………….……………pg.54)DANGERS……….………………………………………………………………………………………..pg.75)PART DESCRIPTION……………..………………………………………………………….………………….pg.86)TRUOBLESHOOTING ………………………………………..…………………...…………………….pg.97)DISPOSAL…….………………...………………………………………………………..…………….....pg.9Environmentally friendly handling of the product.1)GENERAL FEATURES ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••Actuatech manufacture a manual handwheel override for a wide range of part turn pneumatic actuators.The actuators with manual override are available on Double Acting “GDV” and Spring Return “GSV” versions.- The principle of the manual handwheel override application is to provide the possibility to open and close the valve connected to the actuator when this operation can’t be done with remote control.- Actuatech manual override actuator is itself equipped with an handwheel for manual operations and it doesn’t need any added declutchable gear box. This solution guarantees a compact size and a more light system on the valve.- When the actuator is manual operated it can be locked in Open/Closed position.- Actuator versions for low temperature and high temperature applications allow to operate respectively until temperatures of -50°C and +150°C, thanks to proper kind of lubrication and material for the gaskets.The maintenance should be done by Actuatech trained personnel only.This instruction manual contains important information regarding the Actuatech manual override actuator operation, installation, maintenance and storage.Please read carefully before installation and keep it in a safe place for further reference.Modification reserved. Rev.date 04/2018. No guarantee for accuracy. Older data sheets are invalid 2)DATASHEET•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• DOUBLEACTINGNOMINALTORQUE (Nm)ISOFLANGESQUAREØHANDWEELRim pull forces ( N )To obtain thenominal torqueWeight( Kg )Teorical n° of turnsto close / openstarting from theneutral positionA B C DGDV60 60 F05-F07 14 180 19.3 2.8 11 - 99 263.3 137.6 GDV106 106 F05-F07 17 180 27.8 4 13 - 118.5 279.3 154.8 GDV120 120 F05-F07 17 180 33.8 4.5 14 - 122.1 288.4 163.9 GDV180 180 F07-F10 22 220 44.1 6 16 - 144.9 338.1 183.5 GDV240 240 F07-F10 22 220 54.5 8 18 - 156.8 353.7 199.1 GDV360 360 F07-F10 22 300 67.5 10.2 15 - 169.6 398 220.8 GDV480 480 F10-F12 27 300 83.3 13.2 16 - 193.8 440.6 236.4 GDV720 720 F10-F12 27 350 108.8 17.8 19 - 216.6 503.5 282.3GDV960 960 F10-F12 /F1436 350 128.6 23.8 20 - 239.7 518.3 297.1 GDV1440 1440 F12 / F14 36 400 133.5 33.6 25 - 283.5 636.4 365.6GDV1920 1920 F12-F16 /F1446 400 162.5 43 26 - 300.4 653.7 382.9 GDV3840 3840 F16 46 575 243.5 75 30 - 353.3 890.2 537.5SIMPLEACTINGNOMINALTORQUE (Nm)ISOFLANGESQUAREØHANDWEELRim pull forces ( N )To obtain thenominal torqueWeight( Kg )Teorical n° of turnsto close / openstarting from theneutral positionA B C DGSV30 30 F05-F07 14 180 19.3 3.2 11 129.4 - 263.3 137.6 GSV053 53 F05-F07 17 180 27.8 4.5 13 152.1 - 279.3 154.8 GSV060 60 F05-F07 17 180 33.8 4.5 14 169.3 - 288.4 163.9 GSV090 90 F07-F10 22 220 44.1 6.8 16 196.8 - 338.1 183.5 GSV120 120 F07-F10 22 220 54.5 9 18 204.8 - 353.7 199.1 GSV180 180 F07-F10 22 300 67.5 11.7 15 237 - 398 220.8 GSV240 240 F10-F12 27 300 83.3 15.2 16 260.2 - 440.6 236.4 GSV360 360 F10-F12 27 350 108.8 19.5 19 306.6 - 503.5 282.3GSV480 480 F10-F12 /F1436 350 128.6 28.1 20 324.1 - 518.3 297.1GSV720 720 F12 / F14 36 400 133.5 38.8 25 399 - 636.4 365.6GSV960 960 F12-F16 /F1446 400 162.5 50.6 26 414 - 653.7 382.9GSV1920 1920 F16 46 575 243.5 91 30 509 - 890.2 537.5 All the dimensions are in mm, for missing data see standard catalogue .Modification reserved. Rev.date 04/2018. No guarantee for accuracy. Older data sheets are invalid3) FUNCTIONAL DESCRIPTION •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• NB: PRIOR TO MANUAL OVERRIDE OPERATE, ENSURE THAT THE ACTUATOR IS FREE FROM PRESSURE.1.Remove the cap to ensure there is no pressure in the actuator2.Engage the manual override and operate as required3.Disconnect the manual override (neutral position)*for standard actuators.TO CLOSE THE VALVETo close the valve turn the wheel in clockwise direction*.TO OPEN THE VALVETo open the valve turn the wheel in counterclockwise direction.* NB: Before commissioning to ensure proper disengagement, perform an ON-OFF maneuver of the actuatorModification reserved. Rev.date 04/2018. No guarantee for accuracy. Older data sheets are invalidNB: WHEN THE ACTUATOR HAS BEEN MANUALLY OPERATED, RETURN TO THE NEUTRAL POSITION PRIOR TO START NORMAL OPERATIONS.NEUTRAL POSITIONWith the screw in neutral position the piston can move freely and the actuator can be driven pneumatically. MANUAL OPERATION GDV : The handwheel turned counter clockwise, pushes the screw and piston inwards. The valve opens. GSV : The handwheel turned clockwise pushes the screw and piston inwards. The valve closes.MANUAL OPERATIONGDV : When the handwheel is turned clockwise, the screwand piston are drawn outwards. The valve closes. GSV : When the handwheel is turned counter clockwise, the screw and the piston are drawn outwards. The valve opens.Modification reserved. Rev.date 04/2018. No guarantee for accuracy. Older data sheets are invalid4)WARNINGS •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• a) Don’t disassemble, compressed spring inside.b) Don’t use levers or bars.c) Don’t use the handwheel to lift the actuator.NB:Manual override is not recommended for safety related applications (SIL) as bypass of a security function. In this application, to prevent an unauthorized use, the manual override is provided with a locking device.Modification reserved. Rev.date 04/2018. No guarantee for accuracy. Older data sheets are invalid5)PART DESCRIPTION ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••NB: In the case of actuator low or high temperature the pistons and the material of the O ring are different from the standard actuator.Modification reserved. Rev.date 04/2018. No guarantee for accuracy. Older data sheets are invalid6)TROUBLESHOOTING •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• POTENTIAL EFFECT OFFAILUREPOTENTIAL CAUSE OF FAILURE SOLUTION Difficult manual operationsBlocked valve Repair or replace the valvePresence of particles inside the actuator due toan incorrect filtration of the airVerify the condition of the supply airand contact ActuatechThe actuator is pressurized Remove supply air7)DISPOSAL •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Our products are designed so that when they are at the end of their life cycle they can be completely disassembled, separating the different materials for the proper disposal and/or recovery. All materials have been selected in order to ensure minimal environmental impact, health and safety of personnel during their installation and maintenance, provided that, during use, they are not contaminated by hazardous substances.The personnel in charge of the product disposal/recovery, must be qualified and equipped with appropriate personal protective equipment (PPE), according to the product size and the type of service for which the device was intended. The management of waste generated during the installation, maintenance or due to the product disposal, is governed by the rules in force in the country where the product is installed, in any case, the following are general guidelines:- The metal components (aluminum/steel) can be restored as raw material;- Seals/sealing elements as contaminated by fluids from other materials and lubrication,must be disposed of.- The packaging materials that come with the product, should be transferred to the differentiated collection systemavailable in the country.。
职业经理人-柏勒夫气动执行器说明书 精品
BELEF Pneumatic Actuators Incorporate latest mechanical technology, materials available through designing, developing, testing and engineering application, we have obtained a high grade product with the characteristics of reliability, high performance, long cycle life, large adjustment, highest levels of corrosion protection, wide selection of model with easy and economy.柏勒夫气动执行器柏勒夫气动执行器综合了国际最新材料技术、精密加工技术、工业美术设计技术。
经过设计、开发、测试、生产和工程运用，该系列执行器具有运行可靠、工作寿命长、可调范围大、防腐性能高、规格多、选型灵活、经济实惠等优点。
性能、结构和设计特点● 挤压铝质(ASTM6005)缸体，内表面细磨精加工，内部和外部均采用高级防腐技术，气缸摩擦系数小，使用寿命长，抗腐蚀性能强。
● 双活塞齿轮齿条式设计，结构紧凑、安装位置对称、改变输出轴转向方便，使用寿命长、动作迅速。
活塞齿条背面装有复合轴承及导向环，动作精确、摩擦系数小、使用寿命延长。
● 组合式预负荷镀层弹簧，工作寿命长。
● 高精度齿轮和齿条，啮合间隙小、精度高，输出功率大。
● 不锈钢紧固件,安全美观，抗腐蚀性强。
● 采用国际规范尺寸:输出轴槽、螺孔;顶部安装孔尺寸符合NAMUR 标准;气源接口尺寸符合NAMUR 标准;底部安装孔尺寸符合IS05211、DIN3337标准，方便安装电磁阀限位开关等附件。
Design & Constructin of BAILEFU Pneumatic Actuators气动执行器结构Construction of Pneumatic Actuator● Extruded aluminum ASTM6005 body with bath internal and external corrosion protection having honed cylinder surface for longer life and low coefficient of friction.● Dual piston rack an d pinion design for pact construction, symmetric mounting position, high-cycle fife and fast operation, reverse rotation can be acplished in the field by simply inverting the pistons. ● Multiple bearings and guides on racks and pistons, low friction, high cycle life and prevent shaft blowout.● Modular preloaded spring cartridge design, with coatedspring for simple versatile range, greater safely and corrosion resistance, longer cycle life.● Fully machined teeth on piston and pinion for accurate low bac klash rack and pinion engagement, maximum efficlency. Stalnless steel fasteners for long term corroslon resistance● Full conformance to the latest specifications: IS05211,DIN 3337 and Namur or product inter changeahility and easy mounting of solenoids, limit switches and other aocessodes.have obtained a high grade product with the characteristics of reliability, high performance, long cycle life, large adjustment, highest levels of corrosion protection, wide selection of model with easy and economy.执行器零件、材料一览表Actuators Parts and Material Tablehave obtained a high grade product with the characteristics of reliability, high performance, long cycle life, large adjustment, highest levels of corrosion protection, wide selection of model with easy and economy.工作原理和输出扭矩Operating Principle and Out Torquehave obtained a high grade product with the characteristics of reliability, high performance, long cycle life, large adjustment, highest levels of corrosion protection, wide selection of model with easy and economy.工作原理和输出扭矩Operating Principle and Out Torquehave obtained a high grade product with the characteristics of reliability, high performance, long cycle life, large adjustment, highest levels of corrosion protection, wide selection of model with easy and economy.工作原理和输出扭矩Operating Principle and Out Torquehave obtained a high grade product with the characteristics of reliability, high performance, long cycle life, large adjustment, highest levels of corrosion protection, wide selection of model with easy and economy.工作原理和输出扭矩Operating Principle and Out Torquehave obtained a high grade product with the characteristics of reliability, high performance, long cycle life, large adjustment, highest levels of corrosion protection, wide selection of model with easy and economy.have obtained a high grade product with the characteristics of reliability, high performance, long cycle life, large adjustment, highest levels of corrosion protection, wide selection of model with easy and economy.顶部连接尺寸符合VDI/VDE3845NAMUR标准，易于安装限位开关和定位器等附件Connection dimensions of the top conform tostandard VDI/VDE3845 NAMUR，convenientto install limit switch and localizer.侧面连接尺寸符合VDI/VDE3845 NAMUR标准，适于安装电磁阀.Connection dimensions of the side conformto standard VDI/VDE 3845 NAMUR，fit forinstalling solenoid valve.底部连接尺寸符合IS05211和DIN3337标准，可直接和阀门连接星型和方型孔便于各种阀门的直接连接。
气动蝶阀说明书
气动蝶阀使用说明书北京阿尔肯阀门有限公司一、概述气动蝶阀（调节阀/开关型），是在引进国外先进技术的基础工业上进行特殊设计，精心制造的产品。
可采用智能控制与定位、与德国西门子公司生产的电气阀门定位器或国产电气阀门定位器配套，输入4~20mA DC 信号及0.5~0.7Mpa 气源即可控制运转，实现对压力、流量、温度、液位等参数的调节。
它是以压缩空气为动力，阀杆带动阀芯在阀体内转动90，可以实现全开——全闭的动作。
该产品按其密封性能分为金属密封与软密封。
二、特点气动蝶阀（调节阀/开关型）具有结构紧凑，体积精小，运行可靠，密封性好，维修容易，安装方便，适应性强等优点。
可广泛应用于石油、化工、轻工、制药、造纸等工业自动控制系统中作远距离集中控制或就地控制。
三、型号编制说明四、工作原理和结构气动调节蝶阀由气动活塞式执行机构与蝶阀组合构成。
（如图1）GT 系列气动执行机构相同规格有双作用式、单作用式(弹簧复位)；标准旋转轴角度可调节-5～+50 范围；阀体材质碳钢不锈钢铸铁代号C P 省略工作温度℃中温常温代号G公称压力MPa 1.0 1.6 2.5 4.0 6.4代号10 16 25 40 64密封面材料四氟乙烯金属密封代号F H连接形式法兰丝扣对夹式代号41 11 71执行机构电动气动代号9 6DY D 6 71 X 10 C G所有滑动部件采用塑料轴承衬套、导向，保持最小摩擦力，并有效地抵抗磨损；外壳表面阳极化电镀，防腐蚀保护；旋转轴镀硬质镍磷合金；螺丝、螺母为不锈钢；单作用式弹簧预装在弹簧座内，很容易装配或增补弹簧数量；连接、安装接口标准化模块设计，方便配装球阀、蝶阀、信号盒及控制附件；可选择旋转方向顺时针旋转或逆时针旋转；两端调节螺丝可调节小于标定角度调整。
特殊的腐蚀环境可采用不锈钢外壳。
蝶阀是在圆柱形的阀体通道内，安有一个圆盘状蝶形阀板，它绕着轴线作0~ 90°旋转。
蝶板处在0°时，阀门全闭，旋转到90 度时，则阀门全开。
Burkert 2051QT气动旋转执行器说明书
Pneumatic rotary actuatorDouble acting and spring return The 2051QT pneumatic rotary actuators are ofthe rack and pinion type where the linear kineticenergy is directly transformed into a “quarter turn” operation with a constant output torque over the full stroke.Both double acting and spring return actuators have twin pistons horizontally opposed and incorporate piston guides to ensure correct contact between the rack and pinion at all pressures.High quality materials are employed throughout the construction and the compact design is readily fitted to any type of ball valve, butterfly valve or other equipment requiring efficient pneumatic actuators.The actuator is suitable for mounting a full range of accessories, such as limit switches, solenoid valves, positioners and manual override gearbox.Extruded aluminium alloy, gold anodizedPressure die cast aluminium alloy, black epoxy coated Carbon steel, zinc platedType 6519NAMUR Solenoid valve Type 8792/93 Positioner SideControlType MV2650Ball valve Type 1062QTPosition feedbackType VV2670Butterfly valveFunctional principleDouble acting actuator (DA)Counter clockwise output operation is achieved by inserting pressure into Port ‘A’, to force piston apart thus rotating the actuator pinion counter clockwise. During the operation, air from the outer chambers is exhausted through Port ‘B’. Clockwise output operation is achieved by reverse of the above and inserting pressure into Port ‘B’.Single acting actuator (SR)Pressure applied to Port ‘A’ will cause the inner chambers to be pressurized, forcing the pistons outward to compress the springs. The pinion is rotated counter clockwise. Upon release of pressure through Port ‘A’ the springs will exert pressure to close the pistons and rotate the pinion clockwise rapidly. This action will often be used to close a 90oturn valve in shutdown mode.Pistons assembly variationsArrangement of springs for single acting actuatorActuator direction of rotation can be changed by switching both the pistons in accordance to the below diagramSprings can be added or removed according to torque requirement. It is recommended to install springs in accordance to the below diagramAir ConsumptionFree Air per stroke (Liters)Opening / Closing timeat 5.6 bar airWeight (kg)Torque Output (Nm) | Ordering Chart (other versions on request) Double acting actuator (DA)Torque Output (Nm) | Ordering Chart (other versions on request) Single acting actuator (SR)Dimensions [mm]AP01 to AP10 DA/ SR*** To be specified during order. Please refer to Ordering Chart.Parts listAP01 to AP10 DA/ SR* Suggested spare parts for routine maintenanceDimensions [mm]AP00 DAParts listAP00 DA* Suggested spare parts for routinemaintenanceDimensions [mm] - with accessoriesIn case of special application conditions,please consult for advice.We reserve the right to make technical changes without notice2051QT/EN/R1_12/2013With Type 6519 NAMUR solenoid valveWith declutchable manual override gearboxWith 879x positioner SideControlWith 1062QT position feedback。
气动阀门执行器
气动阀门执行器由于现在的控制方式和手段越来越多，在实际工业生常和工业控制中，用来控制气动执行机构的方法也很多，常用的有以下几种。
(一)利用PLC来控制的系统PLC在控制系统中的应用越来越广泛，由于本方案是在OMRON的PLC 上面作的开发，所以以OMRON的PLC来作介绍。
硬件组成：1台计算机，1套PLC(包括CPU，I/O模块，ID212，OC224，AD003模块)，2个继电器，2个电磁阀，1个气动阀门执行器。
其组成原理为：由PC机通过RS-232串口通讯连接OMRON的PLC，对PLC进行编程和监控。
PLC的I/O模块分别接入输入、输出信号，其中输入模块连接到阀门上的两个位置传感器，通过PLC的输入模块ID211的指示灯亮的先后顺序来显示阀门的开关状态。
输入模块接收两路阀门检测脉冲输入，即脉冲A与脉冲B。
在运行状态下，脉冲A输入时指示灯A亮，脉冲B输入时指示灯B亮。
输入顺序为AB，表示开阀。
输入顺序为BA表示关阀。
阀门检测脉冲A和B信号必须部分叠加，否则不能正常检测阀门开度。
通过PLC的输出模块OC225控制两个继电器，继电器具有两组常开常闭输出触点，1组为开阀输出触点，1组为关阀输出触点。
开阀时，当阀门开度大于或等于所设阀门限位值时开阀输出触点动作，阀门开度小于所设阀门限位值时开阀输出触点动作，发明开度小于所设阀门限位值时开阀输出触点复位。
关阀时，当阀门关到零位且21s内无脉冲输入时关阀输出触点动作；若21s内有脉冲输入，则延时21s关阀输出触点动作。
通过继电器的吸合来控制两个电磁阀的开关，电磁阀打开后，便可以控制气动阀门执行器使得阀门做相应的开阀或关阀动作。
同时接近传感器把阀门的开关情况再传送到PLC中，并同要求的阀门开度作比较，直到符合要求为止。
自动归零与自动调满：控制系统具有自动归零与自动调满功能，当阀门开度小于归零范围值或阀门开度距满量程小于满度调节范围值，且时间大于或等于所设值稳定时间值时，PLC自动控制阀门进行归零或自动调满。
气动执行器的产品说明书
S E R I E S P L S O L E N O I D V A L V E SDirect acting solenoid valves Series PL2/2-way - Normally Open (NO)3/2-way - Normally Closed (NC) and Normally Open (NO) 3/2-way - Universal (UNI)Series PL solenoid valves are available in the normally closed, normally open and universal versions. They can be mounted on single sub-bases or manifolds.Please note that all Series PL solenoid valves are supplied with direct current (DC). To operate in alternating current (AC), it is necessary to use the connector with bridge rectifier Mod. 125-900.»Application sectors: - Industrial Automation - Life Science - Transportation »Mounting on a single base (M5 connections) or on manifold (M5 or fittings Ø3 and Ø4)GENERAL DATATECHNICAL FEATURES Function OperationPneumatic connections Orifice diameterFlow coefficient kv (l/min) Operating pressure Operating temperature MediaResponse time Manual override Installation2/2 NO - 3/2 NC - 3/2 NO - 3/2 UNI direct acting poppet type on subbase 0.8 ... 1.6 mm 0.30 ... 0.62 0 ÷ 3.5 ... 10 bar0 ÷ 50 °C (FKM) / -50 ÷ 50 °C (low temperature NBR on demand)filtered air class [5:4:4] according to ISO 8573-1:2010 (max oil viscosity 32 cSt), inert gas ON <10 ms - OFF <15 msmono/bistable - PBT 3/2 versions onlyin any positionMATERIALS IN CONTACT WITH THE MEDIUM Body SealsInternal parts brass - PBT - PPSFKM - NBR - EPDM (on demand) brass - stainless steelELECTRICAL FEATURES VoltageVoltage tolerance Power consumption Duty cycleElectrical connection Protection class6 ... 110 V DC - other voltages on demand ±10% 1.2 ... 3 W ED 100%industry standard connector (9.4 mm) IP65 with connectorSpecial versions available on demandS E R I E S P L S O L E N O I D V A L V ES* 3/2 NO IN-LINE version: the position of the ports 1 - 2 - 3 is identical to 3/2 NC versionCODING EXAMPLES E R I E S P L S O L E N O I D V A L V E SSeries PL solenoid valve - 2/2-way NO - series PD interfaceSupplied with: 2x O-Rings2x M3x20 screws for mounting on metal or2x Ø3x23 screws for mounting on plastic(opt. P)* add - VOLTAGE - FIXING(see CODING EXAMPLE)Series PL solenoid valve - 3/2-way NCSupplied with: 1x interface seal2x M3x20 screws for mounting on metal or2x Ø3x23 screws for mounting on plastic (opt. P)Also available ST models forT amb. -50 ÷ 50 °C with NBR seals.* add - VOLTAGE - FIXING(see CODING EXAMPLE)S E R I E S P L S O L E N O I D V A L V E S2x M3x20 screws for mounting on metal or2x Ø3x23 screws for mounting on plastic (opt. P)Also available ST models forT amb. -50 ÷ 50 °C with NBR seals.* add - VOLTAGE - FIXING(see CODING EXAMPLE)Series PL solenoid valve - 3/2-way NO IN-LINESupplied with: 1x interface seal2x M3x20 screws for mounting on metal or2x Ø3x23 screws for mounting on plastic (opt. P)Also available ST models forT amb. -50 ÷ 50 °C with NBR seals.* add - VOLTAGE - FIXING(see CODING EXAMPLE)S E R I E S P L S O L E N O I D V A L V E S2x M3x20 screws for mounting on metal or2x Ø3x23 screws for mounting on plastic (opt. P)Also available models for T amb. -50 ÷ 50 °C with NBR sealsVacuum operation with max. pressurereduction* add - VOLTAGE - FIXING(see CODING EXAMPLE)S E R I E S P L S O L E N O I D V A L V ESSingle sub-base for 15mm size 2 way interfaceSingle sub-base suitable for 2-way solenoid valves Series PD and PL models PD000-2A..., PL000-9B... Use solenoid valves with fixing screws for metal (see codification page)Material: anodized aluminiumConnections: G1/8 threadsSingle sub-base for 3-way solenoid valve size 15 mmSingle sub-base suitable for Series P - PL - PN - W 3-way solenoid valveUse solenoid valves with screws for mounting on metal (see coding)Material: anodized aluminiumConnections: M5 threadsSingle manifold with rear outletsManifold suitable for Series P - PL - PN - W 3-way solenoid valveUse solenoid valves with screws for mounting on metal (see coding)Material: anodized aluminiumS E R I E S P L S O L E N O I D V A LV E SManifold - single side valve - frontal outletsManifold suitable for Series P - PL - PN - W 3-way solenoid valveUse solenoid valves with screws for mounting on metal (see coding)Can be fixed through DIN 46277/3 guide with the accessory PCF-E520.Material: anodized aluminiumManifold - double side valve - bottom outletsManifold suitable for Series P - PL - PN - W 3-way solenoid valveUse solenoid valves with screws for mounting on metal (see coding)Material: anodized aluminiumManifold - double side valve - frontal outletsManifold suitable for Series P - PL - PN - W 3-way solenoid valveUse solenoid valves with screws for mounting on metal (see coding)Can be fixed through DIN 46277/3 guide with the accessory PCF-E520.Material: anodized aluminiumS E R I E S P L S O L E N O I D V A L V ESPosition valve capSupplied with:1x position valve cap 1x interface seal2x screwsConnector Mod. 125-... - industrial std. 9.4 mmConnector Mod. 125-... - industrial std. 9.4 mm - 90° cableThe internal rectifier circuit of the connectorMod. 125-900 allows to use solenoid valves with different AC voltage, even if the voltage indicated onthe solenoid valve is DC.S E R I E S P L S O L E N O I D V A L V E SConnector Mod. 125-... - industrial std. 9.4 mm - in-line cablewithout electronicsConn. Mod. 125-... - ind. std. 9.4 mm - in-line cable+rectifierwith voltage rectifierAC/DC。
气动执行器技术介绍
气动执行器技术介绍气动执行器又叫气动装置或者气动执行机构俗称气动头，是用气压力驱动启闭或调节阀门的执行装置。
本文对气动头的各种技术要求，进行阐述。
结构1、气动装置主要由气缸、活塞、齿轮轴、端盖、密封件、螺丝等组成；成套气动装置还应该包括开度指示、行程限位、电磁阀、定位器、气动元件、手动机构、信号反馈等部件组成。
2、气动装置与阀门的连接尺寸应符合ISO5211(底部)、GB/T12222 和GB/T12223 的规定。
3、带手动机构的气动装置，在气源中断时，应能用其手动机构进行阀门的启闭操作，面向手轮时，手轮或手柄应逆时针旋转为阀开，顺时针旋转为阀关。
4、活塞杆端部为内、外螺纹时，应有标准扳手适用的扳手口。
5、活塞的密封圈应便于更换与检修。
6、带缓冲机构的气动装置，其缓冲机构的行程长度可参照《表1》的规定。
7、带可调缓冲机构的气动装置，应有缸体外部调节其缓冲作用的机构。
8、气缸进出气口的螺纹尺寸应符合MANUR NORM(附件标准) GB/T7306.1、GB/T7306.2 和GB/T7307 的规定。
性能1、气动装置额定输出力或力矩应符合GB/T12222 和GB/T12223 的规定2、在空载情况下，对气缸内输入按《表2》规定的气压，其动作应平稳，无卡阻及爬行现象。
3、在0.6MPa 的空气压力下，气动装置启、闭两个方向的输出力矩或推力，其值应不小于气动装置标牌所标示的数值，且动作应灵活，不允许各部位出现永久变形及其他异常现象。
4、密封试验用最大工作压力进行试验时，从各自背压一侧泄漏出的空气量不允许超过(3+0.15D)cm3/min（标准状态）；从端盖、输出轴处泄漏出的空气量不允许超过(3+0.15d)cm3/min。
5、强度试验用1.5 倍的最大工作压力进行试验，保持试验压力3min 后，其缸体端盖和静密封部位不允许有渗漏及结构变形。
6、动作寿命次数，气动装置模拟阀门动作，在保持两个方向的输出力矩或推力能力的情况下，启闭操作的启闭次数应不低于50000 次（启—闭循环为一次）。
麦克西莫特手动阀气动执行器 MT R3 0713说明书
Air Pressure Required to Open Valve At: System Pressure (ksi)
1-4 6
8
10
65 65 65 75 0.19 0.19 0.19 0.25
0.25 35 35 35 40 0.19 0.19 0.19 0.25
0.25 65 65 75 85 0.19 0.19 0.25 0.31
5.67”
3.94”
1/8” NPT
(2) 9/32” Dia. Mounting Holes Centered 1 1/8” apart
Valve Series
21V4
21V6, 15V4,
**
21V9, 15V6, 15V8,
**
21V12
21V16
Air Actuator
Type
Ordering Suffix
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. MT R3 0713
4%#(./,/')%3
Air Valve Actuators
Medium Duty Actuator
Heavy Duty Actuator
3.94”
1/8” NPT
(2) 9/32” Dia. Mounting Holes Centered 1 1/8” apart
(2) 9/32” Dia. Mounting Holes Centered 1 1/8” apart
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
气动执行器详细说明：气动执行器DP系列特征结构形式:双活塞齿轮齿条式结构输出扭矩平稳单作用加弹簧,单双作用同一缸体.型号有DP32/DP45/DP52/DP63/DP75DP75/DP83DP92/DP110/DP127/DP143/DP160/DP190/DP210/DP 240/DP270/DP300/DP350/DP400/DP500/DP600.AP50/AP100/AP150/AP200/AP250/AP300/AP350/AP400/AP450/AP500/AP600/AP700/AP800JA T 50 D/SJA T 63 D/SJA T 75 D/SJAT 90 D/SJAT 100 D/SJAT115 D/SJAT 125 D/SJAT 145 D/SJAT 160 D/SJAT 190 D/SJAT 210 D/SJAT 240 D/SJAT270 D/SJA T 50 D/SJAT 63 D/SJAT 75 D/SJAT 90 D/SJAT 100 D/SJAT115 D/SJAT 125 D/SJAT 145 D/SJAT 160 D/SJAT 190 D/SJAT 210 D/SJAT 240 D/SJAT270 D/SISO 5211F03F04F05/F07F05/F07F05/F07F07/F10F07/F10F10-F12F10/F12F12F12F14F14防爆电动执行机构防爆电动执行器角行程防爆电动执行器JDA-60电动执行器JDA-20电动执行器JDA-10电动执行器JD-05电动执行器JDA-05JDA-10JDA-20.40JDA-60JDA-100JDA-20060Kgfm1A/100V0.45A/200V30秒/50HZ氧气阀门的工作原理气动V型调节球阀气动套筒调节阀气动薄膜直通双座调节阀气动薄膜直通单座调节阀气动薄膜双座调节阀HSC笼式调节阀气动截止阀对夹式气动浆液阀气动插板阀气动带手动楔式闸阀气动法兰闸阀Q644/Q645F气动法兰三通球阀Q611V气动塑料球阀Q641F4气动衬氟球阀Q611气动二片式球阀气动卸灰球阀气动固定式球阀ZSHO-16型气动O型切断球阀气动V型调节球阀Q647F大口径系列固定式气动球阀Q671气动对夹球阀Q641F气动法兰球阀Q644/45F气动球阀(三通)Q672F气动球阀(薄型)Q611F气动球阀(片式)D671V气动蝶阀(塑料)D671X7气动氟橡胶对夹蝶阀D673H气动三偏心对夹蝶阀D671X气动粉尘蝶阀气动通风蝶阀气动蝶阀(法兰软密封)GT气动蝶阀(美标衬氟)D681气动卫生卡箍式蝶阀GZK气动高真空蝶阀D641X气动法兰橡胶密封蝶阀D671X气动蝶阀D643H法兰式气动硬密封蝶阀JDAT系列气动执行器AW/AW-S气动执行器气动执行器电动三通合流调节阀VB7000电动调节阀电动角形高压调节阀电动智能调节阀电动套筒调节阀电动笼式单座调节阀电动双座调节阀电动单座调节阀电动焊接截止阀电动截止阀电动刀型闸阀电动弹性座封闸阀高温高压电站闸阀电动闸阀电动V型球阀电动塑料球阀电动片式球阀电动内螺纹三通球阀电动法兰球阀电动对夹球阀电动法兰固定球阀电动球阀(衬氟)电动三通法兰球阀电动真空蝶阀电动多层次硬密封蝶阀电动三偏心对夹蝶阀电动四氟密封对夹蝶阀电动衬氟蝶阀电动粉尘专用蝶阀电动塑料蝶阀电动通风蝶阀电动法兰软密封蝶阀电动快装蝶阀防爆电动执行机构防爆电动执行器角行程防爆电动执行器JDA-60电动执行器JDA-20电动执行器JDA-10电动执行器JD-05电动执行器GB JB SH HG ANSI API JIS BS DIN GB13927 JB/T9092 API598 标准内螺纹式气动角座阀BDJ-01F气动阀门回信器闸阀齿轮传动气动闸阀气动闸阀手动控制气动闸阀气动闸阀气动闸阀气动球阀气动排渣阀气动截止阀气动蝶阀气动蝶阀气动刀形闸阀气动带手动闸阀气动阀门定位器对夹式软密气动蝶阀气动阀门定位器超薄型气动球阀Q647固定气动球阀Q641气动球阀637H对夹式硬密封气动蝶阀(一片二片三片)气动阀门气动阀门回信器ITS-100限位开关APL-310N限位开关BAPL-510N回信器ITS-102 VCX-5000限位开关德国EBRO限位开关ALS-10信号开关盒德国MSK NSK限位开关阀门回信器MPL-510N 型阀门回信器MPL-210N行程开关阀门TOPWOR限位开关限位开关ITS-300 APL-210N TOPWOR限位开关韩国ITS-102 BAPL-310N BAPL210N BAPL-410N 进口限位开关进口回信器MPL-210N 油枪油阀位置开关CHX210 TOP-312N TOP312N APL-312 机械二位式位置开关MASTS限位开关atsb-v3-2限位开关盒意大利SOLDO回信器油枪行程开关KINETROL限位开定位器ROTECH SIRCA 回讯器气动阀门回信器CAKNA限位开关HAPL-21ON APL-210N ITS-111 MASTS限位开关J+J限位开关EBRO MSK限位开关ULS-210 ALS10 HIC-210N限位开关NTS-C12限位开关NTS-A10限位开关YT-850限位开关WGT气动执行器WGT专业生产厂家3EGTD52气动执行器新一代意大利型气动执行器WA T专业生产厂家电动执行器专业生产厂家WX-10 WX-20 WX003 GT气动执行器意大利型AT气动执行器电动执行器电动执行器厂家电动执行器价格优惠电动执行器质量保证BLD05-BLD200 DA T气动执行器气动双活塞执行器型号OBD双作用式型号OBD-S单作用式弹簧返回JM电动（调节式）阀门执行器可选用AC110V 220V 380V DC12V 24V电源输入信号4-20MA 0-10V或1-5V。
DCModel Performance JM-05 JM-10 JM-20 JM-40 JM-50 JM-100 JM-200 电源Power DC12V 24V AC110V 12V 220V 380V 50/60HZ 输出力矩Output torque 20N.M 50n.m 50N.m 100N.m 100 N.m 200 N.m 400N.M 200 N.m 500 N.m 1000 N.M 2000 N.mmodel 球阀Ball valve 软密封蝶阀Soft seal butterfly valve 硬密封蝶阀Hard seal butterfly valve JM-ZX DN15-DN20 DN25-DN32 JM-05 DN15-DN32 DN40-DN65 JM-10 DN40-DN50 DN80-DN125 DN40-DN65 JM-20 DN65-DN80 DN150-DN200 DN80-DN125 JM-50DN100-DN125 DN250 DN150-DN200 JM-100 DN150-DN200 DN300-DN350 DN250 JM-200 DN250-DN300 DN400-DN500 DN300-DN400FLD-RD045 FLD-RD052FLD-RD063 FLD-RD075 "FLD-RD083FLD-RD092 FLD-RD105FLD-RD125 NAMUR G1/4"FLD-RD140 NAMUR G1/4"FLD-RD160 FLD-RD190FLD-RD210FLD-RD240FLD-RD270 NAMUR G1/2"FLD-RD300 NAMUR G1/2"FLD-RD350FLD-RD032执行器FLD-RD400执行器FLD-RD500执行器FLD-RD600执行器SCE210D2V12 SCE210D2V230 G551B401MO 电磁阀ASCO电磁阀NASS电磁阀SV25–11DEX SV25–11D SV23–11DEX SV25–22D SV25–12DEXi电磁线圈浇封型防爆线圈1213系列电磁线圈0513系列电磁线圈AC/50Hz-60Hz电磁线圈1259 00-1259 491259 50-1259 99本安型防爆线圈NF8327B102电-气阀门定位器YT-1000RYT1000RDn132s01电-气阀门定位器YT-1000RYT-1000R+PTM或L/S(圆顶指示) YT-1000R＋PTM(内置) YT-1000R＋PTM(外置) YT-1000R＋L/S(外置)YT1000LDn132S0 4~20 mA ExdmIIBT5 ExdmIICT5 ExiaIIBT6 ExiallCT6YT2500RDi1211F智能阀门定位器YT-2500L YT-2500R（断信号锁位型）YT-2400RDH1200智能阀门定位器YT-2400L YT-2400RYT2300RDN13200 YT2300L YT2300R 智能阀门定位器YT-2300APL510位置开关APL-410NAPL-522NAPL-510NNPT3/4APL310位置开关APL210NAPL312N气动阀门离合器手轮机构ALXL26ALXL38ALXL54ALXL80ALXL78ALXL98ALXL100ALXL118SY-LH26 SY-LH38 SY-LH54 SY-LH80 SY-LH78 SY-LH80AYT-300 YT305 YT320 YT325 YT310 YT315 YT-325 气动放大器Fred FRED 0755 FRED 25689486QFHS-261 空气过滤减压器EPP1111 EPP1112 EPP1121 EPP1122 EPP1211 EPP122 EPP1212 EPP1222 EP1000系列电气阀门定位器HEP-15电气阀门HEP-16 HEP-17CCCX-3221 阀门定位器CCCX-3311 阀门配件电气阀门定位器ZPD-2000系列电气阀门定位器供应QFHS不锈钢系列空气过滤减压器EP9322可带位置反馈电气阀门定位器EP9321可带位置反馈电气阀门定位器EP9212可带位置反馈电气阀门定位器EP9222可带位置反馈电气阀门定位器EP3000供应EP-800 EPP1000 HEP YT1000 YT1000L 电气阀门定位器气动执行机构DR00300A F07F10-N-DS-22 电动执行机构RQ030F14B4以色列AM CONTROLS气动执行器ZHA/BQ（X）轻小型气动薄膜三通合(分)流调节阀ZHA/BPF-10/16W型轻小型气动薄膜单座衬塑调节阀ZJHC系列气动薄膜切断阀ZHA/BM系列轻小型气动薄膜套筒调节阀ZHA/BS系列轻小型气动薄膜角形调节阀ZHAN系列轻小型气动薄膜直通双座调7736221 7736121 7836100 7836243 7836231 7836221 78362121 7831321 79313212 78312112 7831211 7831221 7731122 ZSHW-10DB ZSHW-16DK ZSJW-10S ZSSW-10DB77/78-36100气动77/78-36100气动O形切断球阀77/78-36200气动V形调节球阀ZTGZ/ZNAZ-64型气动偏心旋转调节阀77/78-31300系列气动高性能蝶阀77/78-31200系列气动软密封蝶阀77/78-31100系列气动蝶阀ZSH/SW系列气动蝶阀ZMA/BP（Ｎ）气动薄膜直通单双座系列调节阀ZMA/BS系列气动薄膜角形调节阀ZMA/BM气动薄膜套筒调节阀ZMA/BS-320/220型气动薄膜高压角形调节阀ZMA/BK-320/160型气动薄膜多级高压调节阀ZMA/BP(N)-10~40W气动薄膜波纹管密封调节阀ZMA/BP-16D型气动薄膜直通低温单座调节阀/ZMAN—16D型气动薄膜直通低温双座调节阀ZMA/BT-10型气动薄膜隔膜调节阀ZMA/BP-100型气动薄膜小流量调节阀SPD/H智能电—气阀门定位器ZPD-01A/02A型电—气阀门定位器ZPQ-01/02型气动阀门定位器ZPB-11/21型气动单双向保位阀QZD-1100型电—气转换器QFH系列空气过滤减压器QFG—1005型空气过滤器QFA-12/13型空气安全阀QFY系列空气减压器气动回信角座阀AM-1000防爆型电动装置AQS手轮型AQS系列防爆型电动执行器气动手轮机构AM-02ST-10限位开关ST-10 2 SPDTITS100限位开关APL限位开关APL 210,310,410IST310防爆型限位开关ITS310（X）以色列ALMIGHTY气源换向电磁阀五口二位五口三位三口二位气源电磁换向阀气动不锈钢角座阀气动丝扣角座阀气动法兰角座阀ZPD-2000系列电气动阀门定位器ECKARDT定位器SRD991/SRI990/SRI986,ECKARDT定位器SRD991/SRI990/SRI986 SR1986-BIDS7EAANA A TEX本安型标准FM本安型标准CSA本安型标准FOXBORO/ECKARDTNELES NE700定位器Neles valve products 控制阀控制开关阀门NELES蝶阀电动–执行机构气动双膜执行机构,E系列气缸式执行机构,B系列Quadra-Powr II 气动弹簧薄膜执行机构手动齿轮箱Neles ND9000® - 智能阀门定位器Neles FieldCare™- 设备与资产管理Neles ValvGuard™- 用于紧急关闭阀的局部冲程测试系统Neles SwitchGuard™- 开关阀智能控制器气动定位器,NE 700系列气动定位器,NP700 系列Neles Eclipse 限位开关Neles SolaR 限位开关Neles Quartz 限位开关位置传感器,NT700系列NE700 电动–气动定位器可与活塞或膜片执行器配套使用提高运行精确度和可重复性。