envada6000b3说明书
WayCon UFA2 UFA-CP UFA-6000 超声波传感器安装指南说明书
INSTALLATION GUIDEUltrasonic Sensor Series UFA2, UFA-CP and UFA-6000For further information please see the data sheet at /products/ultrasonic-sensors/WayCon Positionsmesstechnik GmbH would like to thank you for the trust you have placed in us and our products. This manual will make you familiar with the installation and operation of our ultrasonic sensors. Please read this manual carefully before initial operation!Unpacking and checking:Carefully lift the device out of the box by grabbing the housing. After unpacking the device, check it for any visible damage as a result of rough handling during the shipment. Check the delivery for completeness. If necessary consult the transportation company, or contact WayCon directly.• These products are neither allowed to be used as safety- or emergency shut-off devices, nor in other applications, where a malfunction of this product may result in personal injury.• Failure to follow this notice may result in serious or fatal injury.Teaching the measurement range:The measuring range is defined by two teach points. The output signal is scaled to the taught measuring range.Procedure:1. Place the target on the position of the 1st teach point (i.e. where 0 V or 4 mA should be output).2. Connect the teaching line (Pin 4) with +V (Pin 1) for 0.1...2 s. LED flashes slowly (1 Hz).3. Within <20 s, place the target on the position for the 2nd teach point (i.e. where 10 V or 20 mA should be output) and connect the teaching line with +V for 0.1...2 s.4. LED flashes 2 times: teach procedure successfulLED flashes 4 times: teach procedure not successfulChanging the analog output signal:The physical quantity (current/voltage) of the analog output is changed.Procedure:1. Connect the teaching line (Pin 4) with +V (Pin 1) for >6 s.2. LED flashes 2 times: change successfulLED flashes 4 times: change not successfulTeaching the window size:The window size is defined by two switching limits.Procedure:1. Place the target on the position of near switching point.2. Connect the teaching line (Pin 2) with +V (Pin 1) for 0.1...2 s. LED flashes slowly (1 Hz).3. Within <20 s, place the target on the position of the far switching point and connect the teaching line with +V for 0.1...2 s.4. LED flashes 2 times: teach procedure successfulLED flashes 4 times: teach procedure not successful2-step teaching:Both conditions (background and object) can be taught successively. The switching point is placed between the object and the background.Procedure:1. Place the target on the position of near switching point.2. Connect the teaching line (Pin 2) with +V (Pin 1) for 2...4 s. LED flashes slowly (1 Hz).3. Within <20 s, remove the target and connect the teaching line with +V for 2...4 s.4. LED flashes 2 times: teach procedure successfulLED flashes 4 times: teach procedure not successfulAutoteach procedure:Opens a teach window for 4...8 s and automatically teaches passing objects. The switching point is placed between the object and the background.Procedure:1. Connect the teaching line (Pin 2) with +V (Pin 1) for 4...6 s. LED flashes fast (2 Hz).2. Within the next 4...8 s, the autoteach procedure detects passing objects.3. LED flashes 2 times: teach procedure successfulLED flashes 4 times: teach procedure not successfulChanging the switching function:Changes between NO <=> NC. Causes a inversion of the switching output function (signal inversion on objects within / outside the window).Procedure:1. Connect the teaching line (Pin 2) with +V (Pin 1) for >6 s.2. LED flashes 2 times: change successfulLED flashes 4 times: change not successfulTeaching the measurement range:The two measuring limits are set by connecting the teaching line with either the power supply GND (0 V) or +V (+24 VDC). The voltage must be active for min. 1 s on the teaching line. During the teaching procedure the LED shows if the sensor has detected the object. With GND the lower measuring limit (0 V or 4 mA) and with +V the upper measuring limit (10 V or 20 mA) is taught. Thus, it is possible to teach a rising or a falling ramp.Procedure:1. Place the object on the lower measuring limit (i.e. where 0 V or 4 mA is desired).2. Connect the teaching line with GND for >1 s.3. Place the object on the upper measuring limit (i.e. where 10 V or 20 mA is desired).4. Connect the teaching line with +V for >1 s.Lower and upper measuring limits can also be programmed individually at a later time. Attention: The teach wire must not be connected during normal operation. Those the sensor can be operated after teaching with a 3 wire cable.LED LIGHTING PATTERN UFA-150-CPEnvironmental influences:Ultrasonic sensors are made for the use in atmospheric air. Environmental Influences like rain, snow, dust or smoke have no influence on the accuracy of the measurement. However, measurements under pressure (higher that the atmospheric pressure) are not possible with ultrasound sensors.Strong wind or air turbulences may lead to instability in measurement values. A flow speed up to a few m/s is unproblematic and will have no influence on the sensor’s accuracy.Target Influences:• Liquids are excellently detectable with ultrasound. A classic application for ultrasonic sensors is level measurement. The sound beam axis however must have a maximum deviation of 3° vertically to the liquid level (no strong waves), otherwise the reflected sound will miss the sensor.• Hot Targets with high temperatures cause a thermal convection in the surrounding air. For this reason the sound beam may be strongly diverted vertically to its axis, so that the echo is weakened, or can no longer be received at all.• For convex (cylindrical and spherical) surfaces every area element has a different angle to the sound cone’s axis. The reflected cone thus diverges and the portion of the sound energy reflected to the receiver is reduced correspondingly. The maximum range decreases with the decreasing size of the cylinder (ball).• The roughness and surface structures of the object to be detected also determine the scanning capacities of the ultrasonic sensors. Surface structures that are larger than the ultrasound wavelength, as well as coarse-grained bulk materials, reflect ultrasound in a scattered manner, and are not detected optimally by the sensor under these conditions.• Hard material reflects almost all of the impulse energy from ultrasound applications in a way that makes them very easy to detect with ultrasound.• Soft material, on the other hand, absorbs almost all of the impulse energy. It is thus harder to detect with ultrasound. These materials include felt, cotton, coarse meshes, foam, etc.• Thin-walled foils behave like soft materials. To be able to use ultrasound, the foil thickness should be at least 0.01 mm.Based on: EN 60947-5-2 + amendments (proximity switches)EN 60947-5-7 + amendments (proximity sensors with analogue output) This is to certify that the following products correspond to the mentioned specifications. Classification Ultrasonic SensorsSeries UFA-150-CP, UFA2, UFA-6000Test on immunity IEC 61000-6-2 (Industry)Type of test applied harmonized standards:EN 61000-4-2, EN 61000-4-3, EN 61000-4-4The declaration of conformity loses its validity if the product is misused or modified without properauthorisation.30.06.2020Andreas Taufkirchen,CEO。
NETGEAR Orbi Usmerjevalnik WiFi 6 AX6000说明书
namestite usmerjevalnik OrbiPreverite, kaj vse omogoča aplikacija Orbi.Začasno prekinite internetno povezavo, zaženite preskus hitrosti, nastavite pametni starševski nadzor in uporabite številne druge možnosti.(Razpoložljivost storitev programskih oprem se razlikuje glede na regijo.)V mobilni telefon prenesite aplikacijo Orbi in upoštevajte navodila za nastavitev.Zavarujte svoje naprave s storitvijo NETGEAR Armor2Z aplikacijo opravite več3Storitev NETGEAR Armor™ s samodejno zaščito vseh povezanih naprav ščiti družinsko omrežje WiFi.V aplikaciji Orbi tapnite ikono Varnost in odkrijte svoj brezplačni preskus.Vsebina PregledUsmerjevalnik Orbi Ethernetni kabelNapajalni adapter (razlikuje se glede na regijo)Usmerjevalnik Orbi1Gumb Sync (Sinhronizacija)2Internetna vrata 10 G 3Ethernetna vrata 2,5 G 4Gigabitna ethernetna vrata LAN5Gumb za ponastavitev 6Napajalni priključek 7Indikator napajanjaPodpora in skupnostObiščite /support, kjer lahko najdete odgovore na svoja vprašanja in dostopate do najnovejših datotek za prenos.Koristne nasvete lahko najdete tudi v skupnosti NETGEAR Community na naslovu .Informacije o skladnosti s predpisi, vključno z izjavo EU o skladnosti, si oglejte na spletni strani https:///about/regulatory/.Pred priklopom na napajanje preberite dokument z informacijami o skladnosti s predpisi.Velja samo za naprave 6 GHz: Napravo uporabljajte le v notranjih prostorih. Naprav v frekvenčnem pasu 6 GHz ni dovoljeno uporabljati na naftnih ploščadih, v avtomobilih, vlakih, na ladjah in letalih, razen na velikih letalih, ko letijo nad 3000 m. Delovanje oddajnikov v frekvenčnem pasu 5.925–7.125 GHz je prepovedano za upravljanje brezpilotnih letalskih sistemov ali komunikacijo z njimi.NETGEAR, Inc.350 East Plumeria Drive San Jose, CA 95134, USA © NETGEAR, Inc., NETGEAR in logotip NETGEAR so blagovne znamke družbe NETGEAR, Inc. Vse blagovneznamke drugih družb so uporabljene samo kot reference.NETGEAR INTERNATIONAL LTD Floor 6, Penrose Two, Penrose Dock, Cork, T23 YY09, IrelandMarec 2023Regulativni in pravni vidikiOdpravljanje težavV primeru težav z namestitvijo poskusite z eno od naslednjih rešitev:•Če ste že lastnik usmerjevalnika Orbi in ste že uporabljali aplikacijo Orbi, odprite nadzorno ploščo in tapnite > SET UP A NEW ORBI SYSTEM (Namestitev novega sistema Orbi).•Izklopite modem in usmerjevalnik Orbi ter ju odklopite. Znova zaženite modem. Usmerjevalnik Orbi znova priklopite na modem in ga poskusite znova namestiti z aplikacijo Orbi.•Če usmerjevalnika Orbi še vedno ne morete namestiti z aplikacijo Orbi, ga ročno namestite prek spletnega vmesnika usmerjevalnika. Za dostop do spletnega mesta usmerjevalnika obiščite .Za več informacij obiščite /orbihelp.Vmesnik za vtičnico tipa C(za večino Evrope)Vmesnik za vtičnico tipa G (za Združeno kraljestvo)。
阿鲁巴6000无线网络控制器说明书
The Aruba 6000 is a modular, full-featured wireless LAN mobility controller that aggregates up to 512 controlled Access Points (APs) and delivers mobility, centralized control, convergence services and security for wireless deployments. The Aruba 6000 is designed to support large deployments in a scaleable manner, and can be easily deployed as an overlay without any disruption to the existing wired network. The device is managed using the ArubaOS or Aruba Mobility Management System.The Aruba 6000 can be deployed as an identity-based security gateway to authenticate wired and wireless users, enforce role-based access control policies and quarantine unsafe endpoints from accessing the corporate network. Guest users can be easily and safely supported with the built-in captive portal server and advanced network services. Features that allow the Aruba 6000 to create a secure networking environment without requiring additional VPN/firewall devices include integrated site-to-site VPN, split-tunneling, ICSA-compliant stateful firewall and NAT. Site-to-site VPN can be integrated with all leading VPN concentrators to provide seamless integration into existing corporate VPNs. In addition, advanced convergence features such as Call Admission Control (CAC), voice-aware RF management and strict over-the-air QoS allow the Aruba 6000 to deliver mobile VoIP capabilities.Controller Performance and CapacityControlled APs Up to 512 Users Up to 8192 MAC addresses Up to 128,000 VLAN IP interfaces 128 Fast Ethernet ports (10/100) Up to 72 Gigabit Ethernet ports (GBIC) Up to 6 Active firewall sessions Up to 512,000 Concurrent IPSEC tunnels Up to 8,192 Firewall throughput Up to 8 Gbps Encrypted throughput (3DES & AES-CCM) Up to 7.2Gbps Wireless LAN Security and Control Features• 802.11i security (WFA certified WPA2 and WPA)• 802.1X user and machine authentication• EAP-PEAP, EAP-TLS, EAP-TTLS support• Centralized AES-CCM, TKIP and WEP encryption• 802.11i PMK caching for fast roaming applications• EAP offload for AAA server scalability and survivability• Stateful 802.1X authentication for standalone APs• MAC address, SSID and location based authentication• Per-SSID bandwidth contracts• SSID-based RADIUS server selection• Secure AP control and management over IPSEC or GRE• CAPWAP compatible and upgradeable• Distributed WLAN mode for remote AP deployments• Simultaneous centralized and distributed WLAN supportIdentity-based Security Features• Wired and wireless user authentication• Captive portal, 802.1X and MAC address authentication• Username, IP address, MAC address and encryption keybinding for strong network identity creation• Per-packet identity verification to prevent impersonation• Endpoint posture assessment, quarantine and remediation• Microsoft NAP, Cisco NAC, Symantec SSE support• RADIUS and LDAP based AAA server support• Internal user database for AAA server failover protection• Role-based authorization for eliminating excess privilege• Robust policy enforcement with stateful packet inspection• Role-based MAC/Ethertype ACLs• Per-user session accounting for usage auditing• Web-based guest enrollment with Aruba GuestConnect™• Configurable acceptable use policies for guest access • XML-based API for external captive portal integration • xSec option for wired LAN authentication and encryption (802.1X authentication, 256-bit AES-CBC encryption)Convergence Features• Voice and data on a single SSID for converged devices • Flow-based QoS using Voice Flow Classification™• SIP, Spectralink SVP, Cisco SCCP and Vocera ALGs • Strict priority queuing for over-the-air QoS• 802.11e support – WMM, U-APSD and T-SPEC• QoS policing for preventing network abuse via 802.11e • SIP authentication tracking• Diffserv marking and 802.1p support for network QoS • On-hook and off-hook VoIP client detection• Voice-aware 802.1x authentication• VoIP call admission control (CAC) using VFC• Call reservation thresholds for mobile VoIP calls• Voice-aware RF management for ensuring voice quality • Fast roaming support for ensuring mobile voice quality • SIP early media and ringing tone generation (RFC 3960)• Per-user and per-role rate limits (bandwidth contracts)Adaptive Radio Management™ (ARM) Features • Automatic channel and power settings for controlled APs • Simultaneous air monitoring and end user services• Self-healing coverage based on dynamic RF conditions • Dense deployment options for capacity optimization• AP load balancing based on number of users• AP load balancing based on bandwidth utilization• Coverage hole and RF interference detection• 802.11h support for radar detection and avoidance• Automated location detection for Active RFID tags• Built-in XML based Location API for RFID applicationsThe Aruba 6000 Mobility ControllerWireless Intrusion Protection Features• Integration with WLAN infrastructure• Simultaneous or dedicated air monitoring capabilities • Rogue AP detection and built-in location visualization • Automatic rogue, interfering and valid AP classification • Over-the-air and over-the-wire rogue AP containment • Adhoc WLAN network detection and containment • Windows client bridging and wireless bridge detection • Denial of service attack protection for APs and stations • Misconfigured standalone AP detection and containment • 3rd party AP performance monitoring and troubleshooting • Flexible attack signature creation for new WLAN attacks • EAP handshake and sequence number analysis • Valid AP impersonation detection• Frame floods, Fake AP and Airjack attack detection• ASLEAP , death broadcast, null probe response detection • Netstumbler-based network probe detectionStateful Firewall Features• Stateful packet inspection tied to user identity or ports • Location and time-of-day aware policy definition • 802.11 station awareness for WLAN firewalling• Over-the-air policy enforcement and station blacklisting • Session mirroring and per-packet logs for forensic analysis • Detailed firewall traffic logs for usage auditing • ICSA corporate firewall 4.1 compliance• Application Layer Gateway (ALG) support for SIP , SCCP , RTSP , Vocera, FTP , TFTP , PPTP• Source and destination Network Address Translation (NAT)• Dedicated flow processing hardware for high performance • TCP , ICMP denial of service attack detection and protection • Policy-based forwarding into GRE tunnels for guest traffic • External service interface for 3rd party security integration for inline anti-virus, anti-spam and content filtering apps • Heath checking and load balancing for external servicesVPN Server Features• Site-to-site VPN support for branch office deployments• Site-to-site interoperability with 3rd party VPN servers • VPN server emulation for easy integration into WLAN • L2TP/IPSEC VPN termination for Windows VPN clients • Mobile edge client shim for roaming with RSA Tokens • XAUTH/IPSEC VPN termination for 3rd Party clients • PPTP VPN termination for legacy VPN integration• RADIUS and LDAP server support for VPN authentication • PAP , CHAP , MS-CHAP and MS-CHAPv2 authentication • Hardware encryption for DES, 3DES, AES, MPPE • Secure point-to-point xSec tunnels for L2 VPNs • RFC 3706 IKE Dead Peer DetectionNetworking Features and Advanced Services• L2 and L3 switching over-the-air and over-the-wire • VLAN pooling for easy, scalable network designs • VLAN mobility for seamless L2 roaming• Proxy mobile IP and proxy DHCP for L3 roaming • Built-in DHCP server and DHCP relay• VRRP based N+1 controller redundancy (L2)• AP provisioning based N+1 controller redundancy (L3)• Wired access concentrator mode for centralized security • Etherchannel support for link redundancy • 802.1d Spanning Tree ProtocolController-based Management Features• RF Planning and AP Deployment Toolkit• Centralized AP provisioning and image management • Live coverage visualization with RF heat maps • Detailed statistics visualization for monitoring • Remote packet capture for RF troubleshooting• Interoperable with Ethereal, Airopeek and AirMagnet analyzers • Multi-controller configuration management • Location visualization and device tracking • System-wide event collection and reportingController Administration Features• Web-based user interface access over HTTP and HTTPS • Quickstart screens for easy controller configuration • CLI access using SSH, Telnet and console port• Role-based access control for restricted admin access • Authenticated access via RADIUS, LDAP or Internal DB • SNMPv3 and SNMPv2 support for controller monitoring • Standard MIBs and private enterprise MIBs• Detailed message logs with syslog event notificationController Power Supply Options • Power Consumption Max. 466 Watts per PSU • HW-PSU-200 AC power supplies deliver 200W of power• AC Input Voltage 90-132VAC, 170-264VAC • AC Input Frequency 47-63 Hz • AC input current 5A @ 110VAC • HW-PSU-400 AC power supplies deliver 400W of power • AC Input Voltage 85-264 VAC, Auto-sensing • AC Input Frequency 47-63 Hz • AC input current: 5A @ 110VACOperating Specifications and Dimensions • Operating temperature range0° to 40° C• Storage temperature range10° to 70° C • Humidity, non-condensing 5 to 95% • Height 5.75˝ (146 mm) • Width 17.4˝ (444 mm) • Depth 12.5˝ (317.5 mm) • Weight30 lbs. (unboxed)Warranty• Hardware 1 year parts/labor• Software90 daysRegulatory and Safety Compliance• FCC part 15 Class A CE • Industry Canada Class A • VCCI Class A (Japan)• EN 55022 Class A (CISPR 22 Class A), EN 61000-3,• EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, • EN 61000-4-5, EN 61000-4- 6, EN 61000-4-8, • EN 61000-4-11, EN 55024, AS/NZS 3548• UL 60950• CAN/CSA 22.2 #609501322 Crossman AvenueSunnyvale, California 94089Tel: 408.227.4500 • Fax: 408.227.4550 © 2007 Aruba Networks, Inc. All rights reserved. Specifications are subject to change without notice.Ordering InformationPart number Description6000-BASE-2PSU-200 Aruba 6000 Base System (Standard Power) 6000-BASE-2PSU-400 Aruba 6000 Base System (SPOE Power)SC-48-C1 Aruba Supervisor Card I (48 AP Support)SC-128-C1 Aruba Supervisor Card I (128 AP Support)SC-256-C2 Aruba Supervisor Card II (256 AP Support)LC-2G Aruba 2xGE Line CardLC-2G24F Aruba 2xGE/24FE Line CardLC-2G24FP Aruba 2xGE/24 FE Line Card SPOELC-GBIC-T Aruba GBIC Interface Adapter - TLC-GBIC-SX Aruba GBIC Interface Adapter - SXLC-GBIC-LX Aruba GBIC Interface Adapter – LXHW-CHAS Aruba 5000 & 6000 Series Base 4-SlotChassis Excludes Fan Tray)HW-PSU-200 Aruba 5000 & 6000 Series Power Supply200 WattHW-PSU-400 Aruba 5000 & 6000 Series Power Supply400 WattHW-FT Aruba 5000 & 6000 Series ReplacementFan TrayHW-SC-LC-BLANK Aruba 5000 & 6000 Series Supervisor /Line Card Slot Blank PanelHW-PSU-BLANK Aruba 5000 & 6000 Series Power SupplyUnit Slot Blank PanelAK-5000-NA Aruba 5000 & 6000 Accessory Kit(HW Installation Guide & 19” Rack Mount Kit) HW-MNT-19 Aruba 5000 & 6000 Series Replacement19” Equipment Rack Mounting KitSC-48-C1-UG-128 Aruba Supervisor Card I System Upgrade(48 AP to 128 AP Support)LIC-SC1-SEC-48* Security Software Bundle for Supervisor Card I (48 AP License)LIC-SC1-ADV-48** Advanced Security Software Bundle forSupervisor card I (48 AP License)LIC-SC1-PEF-48 Policy Enforcement Firewall Module for Aruba Supervisor Card I (48 AP)LIC-SC1-VPN-48 VPN Server Module for Aruba Supervisor Card I (48 AP)LIC-SC1-WIP-48 Wireless Intrusion Protection Module for Aruba Supervisor Card I (48 AP)LIC-SC1-VOC-48 Voice Services Module for ArubaSupervisor Card I (48 AP)LIC-SC1-ESI-48 External Services Interface Module for Aruba Supervisor Card I (48 AP)LIC-SC1-CIM-48 Client Integrity Module for ArubaSupervisor Card I (48 AP)LIC-SC1-XSC-48 xSec Module for Aruba SupervisorCard I (48 AP)LIC-SC1-SEC* Security Software Bundle for Supervisor Card I (128 AP License)LIC-SC1-ADV** Advanced Security Software Bundle forSupervisor Card I (128 AP License)LIC-SC1-PEF Policy Enforcement Firewall Module for Aruba Supervisor Card I (128 AP)LIC-SC1-VP VPN Server Module for Aruba SupervisorCard I (128 AP)LIC-SC1-WIP Wireless Intrusion Protection Module forAruba Supervisor Card I (128 AP)LIC-SC1-VOC Voice Services Module for Aruba Supervisor Card I (128 AP)LIC-SC1-ESI External Services Interface Module for Aruba Supervisor Card I (128 AP)LIC-SC1-CIM Client Integrity Module for Aruba Supervisor Card I (128 AP)LIC-SC2-SEC* Security Software Bundle for Supervisor Card II(256 AP License)LIC-SC2-ADV** Advanced Security Software Bundle for Supervisor Card II (256 AP License)LIC-SC2-PEF Policy Enforcement Firewall Module for ArubaSupervisor Card II (256 AP)LIC-SC2-VPN VPN Server Module for Aruba Supervisor Card II (256 AP)LIC-SC2-WIP Wireless Intrusion Protection Module for ArubaSupervisor Card II (256 AP)LIC-SC2-VOC Voice Services Module for Aruba SupervisorCard II (256 AP)LIC-SC2-ESI External Services Interface Module for ArubaSupervisor Card II (256 AP)LIC-SC2-CIM Client Integrity Module for Aruba Supervisor Card II (256 AP)LIC-SC1-SEC-UG-1* Security Software for Supervisor Card I(Upgrade 48 AP to 128 AP)LIC-SC1-ADV-UG-1** Advanced Security Software for Supervisor Card I (Upgrade 48 AP to 128 AP)LIC-SC1-PEF-UG-1 Policy Enforcement Firewall for Supervisor Card I (Upgrade 48 AP to 128 AP)LIC-SC1-VPN-UG-1 VPN Server Module for Supervisor Card I(Upgrade 48 AP to 128 AP)LIC-SC1-WIP-UG-1 Wireless Intrusion Protection for Sup. Card I(Upgrade 48 AP to 128 AP)LIC-SC1-VOC-UG-1 Advanced AAA Module for Supervisor Card I(Upgrade 48 AP to 128 AP)LIC-SC1-ESI-UG-1 External Services Interface for Supervisor Card I (Upgrade 48 AP to 128 AP)LIC-SC1-CIM-UG-1 Client Integrity Module for Supervisor Card I(Upgrade 48 AP to 128 AP)LIC-1-RAP Remote Access Point License (Single AP License) LIC-4-RAP Remote Access Point License (4 AP License)LIC-6-RAP Remote Access Point License (6 AP License)LIC-8-RAP Remote Access Point License (8 AP License)LIC-16-RAP Remote Access Point License (16 AP License)LIC-24-RAP Remote Access Point License (24 AP License)LIC-48-RAP Remote Access Point License (48 AP License)LIC-64-RAP Remote Access Point License (64 AP License)LIC-128-RAP Remote Access Point License (128 AP License) LIC-256-RAP Remote Access Point License (256 AP License)*Includes Policy Enforcement Firewall (PEF) and Wireless IntrusionProtection (WIP)**Includes Policy Enforcement Firewall (PEF), Wireless Intrusion Protection (WIP) and VPN Server (VPN)Please contact your Aruba Networks Sales representative for more information on configuring and ordering this productSS_6000_US_070611。
是德科技keysight6000系列示波器说明书技术资料安捷伦agilent
快速发现偶发错误。 硬件加速解码 增加了捕获到疑难事件的概率。 在间歇 性故障遭到客户抱怨或关系到产品质量 之前， 安捷伦示波器可帮助您捕获到这 些问题。 轻松捕获足够多的串行数据， 可以 查看所有细节。 深存储器可以捕获较长 时间内的串行数据流。
4
其他有用的特性
高分辨率模式。 在实时单次模式 中， 可提供高达 12 位的垂直分辨率。 在 按照大于 10 µs/ 格的基于时间的设置进 行操作时，连续过滤有序数据点并将过 滤的结果映射到显示屏上。 方便的帮助功能。 嵌入式帮助系统 (11 种语言 ) －如果您不了解某个特 性，可通过它快速找到答案。只需按下 前面板上相应的键，按住一会，就会弹 出一个屏幕来解释其功能。 使用 FFT 进行波形运算。 分析功能 包括减、乘、积分、平方根、微分以及 快速傅立叶变换(FFT)。 峰值检测。 500 MHz 和 1 GHz 时为 350 MHz 时为 500 ps， 100MHz 250 ps， 时为 1ns 的各种机型帮助您查找狭窄的 毛刺。 AutoProbe 接口。 自动设置探 头衰减因数，并为所选的有源探头供 电，有源探头包括屡获殊荣的 1130A 1.5 GHz InfiniiMax 差分有源探头和 1156A 1.5 GHz 单端有源探头系统。 5 位硬件计数器。测量频率达到示 波器带宽。
4 GSa/s
8 Mpts
16
1 GHz
4 GSa/s
8 Mpts
16
您可在以上 16 种 InfiniiVision 6000 系列型号中选择。安捷伦还为先前购买的 6000 系列 DSO 提供了升级套件，只需 5 分钟即可将 DSO 轻松升级至 MSO。
2
哪些因素使 InfiniiVision 6000 系列得到最好的信号可视性?
Moxa NPort 6000系列安全终端服务器产品介绍说明书
NPort 6100/6200Series1/2-port RS-232/422/485secure terminal serversFeatures and Benefits•Secure operation modes for Real COM,TCP Server,TCP Client,PairConnection,Terminal,and Reverse Terminal•Supports nonstandard baudrates with high precision•NPort 6250:Choice of network medium:10/100BaseT(X)or 100BaseFX •Enhanced remote configuration with HTTPS and SSH •Port buffers for storing serial data when the Ethernet is offline •Supports IPv6•Generic serial commands supported in Command-by-Command mode •Security features based on IEC 62443CertificationsIntroductionThe NPort®6000device servers use the SSL and SSH protocols to transmit encrypted serial data over Ethernet.The NPort®6000’s 3-in-1serial port supports RS-232,RS-422,and RS-485,with the interface selected from an easy-to-access configuration menu.The NPort®60002-portdevice servers are available for connecting to a 10/100BaseT(X)copper Ethernet or 100BaseT(X)fiber network.Both single-mode and multi-mode fiber are supported.Secure Data TransmissionFor many applications,guaranteeing secure data transmission is an important concern when connecting serial devices to a network.To answer this concern,the NPort®6000supports the SSL and SSH protocols,which work by encrypting data before sending it over the network.With the NPort®6000,users can rest assured that serial data is transmitted securely over both private and public networks.Zero Data Loss If Ethernet Connection FailsThe NPort®6250device servers help guarantee reliability by providing users with secure serial-to-Ethernet data transmission and a customer-oriented hardware design.If the Ethernet connection fails,the NPort®6250will queue all serial data in its internal 64KB port buffer.When the Ethernet connection is re-established,the NPort®6250will immediately release all of the data in the buffer in the order that it was ers can increase the port buffer size by installing an SD card.SpecificationsMemorySD SlotNPort 6200Series:Up to 32GB (SD 2.0compatible)Ethernet Interface10/100BaseT(X)Ports (RJ45connector)NPort 6150/6150-T:1NPort 6250/6250-T:1Auto MDI/MDI-X connection 100BaseFX Ports (multi-mode SC connector)NPort 6250-M-SC Series:1100BaseFX Ports (single-mode SC connector)NPort 6250-S-SC Series:1Magnetic Isolation Protection 1.5kV(built-in)Optical Fiber800Typical Distance4km5km40kmWavelength Typical(nm)13001310TX Range(nm)1260to13601280to1340 RX Range(nm)1100to16001100to1600Optical Power TX Range(dBm)-10to-200to-5 RX Range(dBm)-3to-32-3to-34 Link Budget(dB)1229 Dispersion Penalty(dB)31Note:When connecting a single-mode fiber transceiver,we recommend using anattenuator to prevent damage caused by excessive optical power.Note:Compute the“typical distance”of a specific fiber transceiver as follows:Linkbudget(dB)>dispersion penalty(dB)+total link loss(dB).Ethernet Software FeaturesConfiguration Options Web Console(HTTP/HTTPS),Serial Console,Telnet/SSH Console,Windows Utility Management ARP,BOOTP,DHCP Client,DNS,HTTP,IPv4/IPv6,SMTP,SNMPv1/v2c/v3,TCP/IP,Telnet,UDP,PPPOE,ICMPWindows Real COM Drivers Windows95/98/ME/NT/2000,Windows XP/2003/Vista/2008/7/8/8.1/10(x86/x64),Windows2008R2/2012/2012R2(x64),Windows Embedded CE5.0/6.0,Windows XPEmbeddedLinux Real TTY Drivers Kernel versions:2.4.x,2.6.x,3.x,4.x,and5.xFixed TTY Drivers SCO UNIX,SCO OpenServer,UnixWare7,QNX4.25,QNX6.x,Solaris10,FreeBSD,AIX5.x,HP-UX11i,Mac OS XAndroid API Android3.1.x and laterMIB MIB-IIUnicast Routing RIPV1/V2,Static RouteSerial InterfaceConnector DB9maleNo.of Ports NPort6150Series:1NPort6250Series:2Serial Standards RS-232,RS-422,RS-485Secure Operation Modes Reverse SSH,Secure Pair Connection,Secure Real COM,Secure TCP Client,SecureTCP Server,SSHStandard Operation Modes Disabled,Ethernet Modem,Pair Connection,PPP,Printer,Real COM,Reverse Telnet,RFC2217,TCP Client,TCP Server,Terminal,UDPBaudrate50bps to921.6kbps(supports non-standard baudrates)Data Bits5,6,7,8Stop Bits1,1.5,2Flow Control RTS/CTS,DTR/DSR,XON/XOFFParity None,Even,Odd,Space,MarkPull High/Low Resistor for RS-4851kilo-ohm,150kilo-ohmsTerminator for RS-485120ohmsRS-485Data Direction Control ADDC®(automatic data direction control)Serial SignalsRS-232TxD,RxD,RTS,CTS,DTR,DSR,DCD,GNDRS-422Tx+,Tx-,Rx+,Rx-,GNDRS-485-4w Tx+,Tx-,Rx+,Rx-,GNDRS-485-2w Data+,Data-,GNDPower ParametersInput Current NPort6150/6150-T:285mA@12VDCNPort6250/6250-T:333mA@12VDCNPort6250-M-SC/6250-M-SC-T:428mA@12VDCNPort6250-S-SC/6250-S-SC-T:376mA@12VDCInput Voltage12to48VDCReliabilityAutomatic Reboot Trigger Built-in WDTAlert Tools Built-in buzzer and RTC(real-time clock)Physical CharacteristicsHousing MetalDimensions(with ears)NPort6150Series:90x100.4x29mm(3.54x3.95x1.1in)NPort6250Series:89x111x29mm(3.50x4.37x1.1in) Dimensions(without ears)NPort6150Series:67x100.4x29mm(2.64x3.95x1.1in)NPort6250Series:77x111x29mm(3.30x4.37x1.1in) Weight NPort6150Series:700g(1.54lb)NPort6250Series:730g(1.61lb)Installation Desktop,DIN-rail mounting(with optional kit),Wall mounting Environmental LimitsOperating Temperature Standard Models:0to55°C(32to131°F)Wide Temp.Models:-40to75°C(-40to167°F)Storage Temperature(package included)-40to75°C(-40to167°F)Ambient Relative Humidity5to95%(non-condensing)Standards and CertificationsEMC EN55032/24EMI CISPR32,FCC Part15B Class AEMS IEC61000-4-2ESD:Contact:4kV;Air:8kVIEC61000-4-3RS:80MHz to1GHz:3V/mIEC61000-4-4EFT:Power:1kV(AC),0.5kV(DC);Signal:0.5kVIEC61000-4-5Surge:Power:1kV(AC),0.5kV(DC);Signal:1kVIEC61000-4-6CS:150kHz to80MHz:3V/m;Signal:3V/mIEC61000-4-8PFMFIEC61000-4-11DIPsSafety UL60950-1Traffic Control NEMA TS2(excluding fiber models)Vibration IEC60068-2-6Freefall IEC60068-2-34DeclarationGreen Product RoHS,CRoHS,WEEEMTBFTime NPort6150/6150-T:2,097,705hrsNPort6250/6250-T:1,947,486hrsNPort6250-M-SC/6250-M-SC-T:1,092,794hrsNPort6250-S-SC/6250-S-SC-T:1,477,682hrsStandards Telcordia(Bellcore)Standard TR/SRWarrantyWarranty Period5yearsDetails See /warrantyPackage ContentsDevice1x NPort6100/6200Series terminal serverPower Supply1x power adapter,suitable for your region(except for-T models) Documentation1x quick installation guide1x warranty cardDimensionsOrdering InformationNPort6150RJ451–0to55°C NEMA TS2✓NPort6150-T RJ451–-40to75°C NEMA TS2–NPort6250RJ452Up to32GB(SD2.0compatible)0to55°C NEMA TS2✓NPort6250-M-SC Multi-mode SCfiber connector2Up to32GB(SD2.0compatible)0to55°C–✓NPort6250-S-SC Single-mode SCfiber connector2Up to32GB(SD2.0compatible)0to55°C–✓NPort6250-T RJ452Up to32GB(SD2.0compatible)-40to75°C NEMA TS2–NPort6250-M-SC-T Multi-mode SCfiber connector2Up to32GB(SD2.0compatible)-40to75°C––NPort6250-S-SC-T Single-mode SCfiber connector2Up to32GB(SD2.0compatible)-40to75°C––Accessories(sold separately)ConnectorsADP-RJ458P-DB9F DB9female to RJ45connectorMini DB9F-to-TB DB9female to terminal block connectorDIN-Rail Mounting KitsDK35A DIN-rail mounting kit,35mmPower AdaptersPWR-12125-DT-S2Desktop power supply(requires power cord),12VDC,1.25A,100-240VAC,0to40°C operatingtemperaturePWR-12150-AU-SA-T Locking barrel plug,12VDC,1.5A,100-240VAC,Australia(AU)plug,-40to75°C operatingtemperatureApplicable Models:NPort6150-TNPort6250-TNPort6250-M-SC-TNPort6250-S-SC-TPWR-12150-CN-SA-T Wide-temperature(-40to75°C)locking barrel plug,12VDC,1.5A,100to240VAC,China(CN)plugApplicable Models:NPort6150-TNPort6250-TNPort6250-M-SC-TNPort6250-S-SC-TPWR-12150-EU-SA-T Locking barrel plug,12VDC,1.5A,100-240VAC,Continental Europe(EU)plug,-40to75°C operatingtemperatureApplicable Models:NPort6150-TNPort6250-TNPort6250-M-SC-TNPort6250-S-SC-TPWR-12150-UK-SA-T Locking barrel plug,12VDC,1.5A,100-240VAC,United Kingdom(UK)plug,-40to75°C operatingtemperatureApplicable Models:NPort6150-TNPort6250-TNPort6250-M-SC-TNPort6250-S-SC-TPWR-12150-USJP-SA-T Locking barrel plug,12VDC1.5A,100-240VAC,United States/Japan(US/JP)plug,-40to75°Coperating temperatureApplicable Models:NPort6150-TNPort6250-TNPort6250-M-SC-TNPort6250-S-SC-TPower CordsCBL-PJ21NOPEN-BK-30Locking barrel plug to bare-wire cablePWC-C7AU-2B-183Power cord with Australian(AU)plug,2.5A/250V,1.83mPWC-C7EU-2B-183Power cord with Continental Europe(EU)plug,2.5A/250V,1.83mPWC-C7UK-2B-183Power cord with United Kingdom(UK)plug,2.5A/250V,1.83mPWC-C7US-2B-183Power cord with United States(US)plug,10A/125V,1.83mPWC-C7JP-2B-183Power cord with Japan(JP)plug,7A/125V,1.83mWall-Mounting KitsWK-35-02Wall-mounting kit,2plates,6screws©Moxa Inc.All rights reserved.Updated Nov08,2019.This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc.Product specifications subject to change without notice.Visit our website for the most up-to-date product information.。
智能门闸6000系列C级锁査DP上门锁文档说明书
6000 seriesC-grade lock cylinderDual verificationAuto lockingHidden PIN codeDDL164ICFB0Stable and LastingLever-held fingerprint enables one grasp to unlockPhilips 6400-1HA adopts an integrated design of the lever and fingerprint sensor,which allows a convenient experience of one-grip unlocking. Besides, the featureslike dual verification and hidden PIN code further enhance family security.Smart life "locked" with excellenceOne-grip opening in one goOne step to close the door and goMultiple protection in one for overall home safetyTechnical lock-picking time exceeds 270 minsProtect home security at all timeInstant alert upon inside unlockingEasy life doesn't stop hereSecurity protection is always onlineProtect real password from being peepingOne button to prevent safety risks while awayHighlightsIntuitive fingerprintingThe fingerprint sensor is integrated at the axis of the handle so that when you hold thehandle, your fingertip will naturally fall on the semiconductor fingerprint reader. Uponsuccessful authentication, you can press down the handle and unlock the door swiftly,bringing you a fast and convenient door opening experience.Auto lockingPhilips 6400-1HA adopts an automaticmortise. Without the need for any extra action,the deadbolt will spontaneously pop out after shutting down the door. If the door is not locked properly, it will trigger an alert to remind you of the door lock status.C-grade lock cylinderThe lock cylinder is the key component that controls the opening of the lock. The Philips 6400-1HA employs multiple anti-thefttechnologies with a unique pin tumbler and vane structure, makes the technical lock-picking time exceeds 270 min*. Plus the concealed lock cylinder design, the lock's security level has been further enhanced.Multiple alertingIt is featured alerting function that includes the anti-dismantling alert, low battery level alert,abnormal bolt alert, and outside forced lock alert, etc., which enhances the family security level and guards you and your family at all times.Outside forced lockWhen going out, long-press the outside forced lock key for 2 seconds to enable outside forced lock mode. Under this mode, an alert will trigger if the door is unlocked from inside,effectively reminding the existence of potential safety risks and upgrading the level of home security.Dual verificationUnder dual verification mode, you can unlock the door with both verification methods of fingerprint and PIN code, which help provide double protection for home security.32-digit hidden PIN codeFeatured with the 32-digit hidden PIN code technology, Philips 6400-1HA allows you to enter any random number combination for verification and unlock the door as long as there is a consecutive input of the validpassword. This feature can effectively prevent peeping and safeguard the real password.SafehandleOnce the safe handle function is enabled, the indoor handle would lock up, allowing nobody to open the door by pressing down the inside handle. This feature can effectively prevent the suspicious unlocking from the inside through the door viewer, or children and pets from unlocking the door accidentally by pressing down the indoor handle, thus reducing security risks for the family.SpecificationsAccess SolutionFingerprintMechanical KeyPassword/PIN CodeDesign & AppearanceColor: Obsidian blackHandle: Lever handleMain Material: Zinc alloyEasy OperationVoice Guide: Human voice guide Indicator: Door locks status prompt, Low battery prompt, Outside forced lock prompt, System locking prompt InstallationDoor Opening Direction: Left inward opening,Left outward opening, Right inward opening,Right outward oepningDoor Thickness: 38-60 mm, 60-90 mm, 90-120 mm, Other range*Door Type: Antitheft door, Copper door,Wooden doorLock CapacityMaster PIN Code: 1One-time PIN Code: 1User PIN Code: Up to 20Power SpecificationBattery Type: Alkaline BatteriesEmergency Power Supply: 5V power bankWorking Voltage: 4.5-6VPower Supply: 4 AA batteriesTime of Use: 10 months*Smart Lock FunctionsAlarm Function: Abnormal bolt alarm, Anti-dismantle alarmMortise: C grade lock cylinderSafety Function: Dual verification, Fake PINcode, Outside forced lock function, Safe handlefuntion* 270 mins:Data source from lock cylinder test report.* The effect of the digital keypad showed in the photosof this product may be inconsistent with the actualdisplay effect. Please be subject to the digital keypaddisplaying status under the actual usage scenarios.* Other door thickness range: If the thickness of the dooris out of the mentioned range, please contact our localdealers or consumer care center.* May be less depending on the actual usage.© 2022 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.Issue date 2022‑05‑13 Version: 1.0.312 NC: 8670 001 71093 EAN: 69 71318 50192 0。
空气净化器系列6000说明书
Room size: up to 169 m²AeraSense technology Removes 99.97% 0.3µm particlesRemoves 99.9% bacteria & H1N1*AC6608/30Healthier Air, AlwaysDouble performance, double reassuranceEquiped with Vitashield IPS, TwinForce aerodynamics design and class leading Aerasense real time numerical air quality sensing techonology, it delivers superior purification efficiency against pollution, common allergens. TVOC and odor.AlwaysSleep mode for your comfortable night of sleepHealthy air protect for smarter filter life managementReal time PM2.5 feedback and 4 color AQI lightSimplicity4 settings to give you ample choice in fan speed.3 options for lights on/off setting to meet your needsChild LockIntuitive design for easy activation on AUTOHealthier AirNanoProtect HEPA filter removes 99.97% 0.3µm particles*2X capacity of clean air delivery with TwinForce aerodynamicUpgraded VItaShield IPS technology filters 20nm* particlesClass leading AeraSense sensing technologyHighlights4 settings in fan speed4 settings to give you an ample selection of fan speedsLight on/off to your needs3 options for lights on/off setting to meet your needs.Silent operationProduct turns down fan speed and noise level in silent mode for your comfortable night of sleep, lights on products can be turned off as you like.Easily activate AUTO modeIntuitive design for easy activation on AUTOHealthy air protect alert/lockWith advanced Aerasense technology, the filter lifetime is accurately calculated based on indoor pollution level, air flow and operation time. Healthy air protect alert lets you knowpromptly when it is time to replace the filter. If the filter is not replaced promptly, theappliance stops functioning to avoid running with no effect since filter not effective. So you are assured of healthy air always.Real time numerical PM2.5The numerical PM2.5 indicator together with 4-step color ring feedback provides real time indoor air quality.Child LockUser friendly child lock functionNanoProtect HEPA filterThe NanoProtect HEPA filter is designed for superior purification efficiency and lifetime against airborne particles. The ever-finer filter effectively removes 99.97% 0.3µm particles*,including common allergens, dust, pollutions,bacteria and some virus.TwinForce aerodynamics designThe core of TwinForce aerodynamic design lies in the precision of twin-fan design and the optimized aerodynamic tunnel curvature.Together with dual air intake architecture the airflow is boosted for supreme Clean Air Delivery Rate (CADR) 657 m3/hr*Upgraded VitaShield technologyUpgraded VitaShield technology effectively removes particles as small as 20 Nanometers*(more than 100 times smaller than upper limit of PM2.5), including common allergens,bacteria and some viruses. It also provides the assured protection from TVOC and odor. PM 2.5is defined as fine dust particles of a diameter of 2.5 micrometers or less. PM 2.5 canpenetrate and settle in the deepest areas of the lungs and cause health problems.World-class AeraSenseAeraSense is a professional-grade sensor that accurately identifies fine particles that are even smaller than PM2.5 (including most commonindoor airborne allergens). It then processes this information to ensure that the purifier’s settings are at the ideal level for current air conditions, and for continuous re-assurance.Then give you feedback of real time indoor air quality by showing PM2.5 level.SpecificationsDesign and finishingAir quality sensor(s): Aerasense PM2.5 sensor Fan speed indicators: Silent, Speed 1, 2, 3, TurboMaterial of main body: PlasticColor(s): WhitePerformanceCADR (cigarette smoke): 657 m³/h Technical specificationsCord length: 2 mEffective area: up to 169 m²Frequency: 50/60 HzPower: 82 WSound level: 36~65 dB(A)Voltage: 220 VCountry of originCountry of origin: KoreaReplacementAC filter: FY6172HEPA filter: FY6171Service2-year guaranteeSustainabilityPackaging: > 90% recycled materialsStand-by power consumption: <0.5 WUser manual: 100% recycled paper* Tested by IUTA. According to 2008 Microbiological RiskAssessment Report of the World Health Organization(WHO), the avian influenza, human influenza viruses,Legionella, Hepatitis viruses and SARS coronavirus arelarger than 20 nanometer (0,00002 mm).* Calculated according to respective standards usingcigarette smoke CADR result tested according toANSI/AHAM AC-1-2015. NRCC-S4013-2011: 169m2;JEM-1467-2009: 81m2; GB/T 18801-2015: 78m2;ANSI/AHAM AC-1-2015: 55m2.* Removes 99.9% bacteria: Tested for StaphylococcusAlbus, condition refer to Anti-bacterial propertiestested according to GB21551.3 using StaphylococcusAlbus, initial concentration is 1*105 cfu/m3* Removes 99.9% H1N1: Tested in Airmid, result has beenshown >99.9% of airborne Influenza A virus (H1N1)within 20 minutes of operation.* Removes 99.97% 0.3µm particles: Tested onNanoProtect filter for 1st pass efficiency at 5.33cm/sairflow, in 2015 by 3rd party lab* up to 8 times: tested for benchmark with Grim sensorand comparison with industry infra-red sensor* CADR 657m3/h is tested by third party test lab,according to GB/T 18801-2015.© 2019 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.Issue date 2019‑08‑13 Version: 2.0.1EAN: 08 71010 38169 28 。
卡西欧pro trek prw-6000使用手册-基础操作
卡西欧PRO TREK PRW-6000使用手册——基础操作手表用途卡西欧PRO TREK PRW-6000系列是卡西欧登山表家族一个系列，目前在国内拥有PRW-6000YT-1B、PRW-6014H-1、PRW-6000Y-1、PRW-6000Y-1A和PRW-6000YT-1共五款产品，它们内置的三重感应器能测量方向、气压、温度及高度，上述测量数值将显示在表盘上，这些功能有助于手表在远足、登山、或进行其他屋外活动时使用。
手表规格常温下的精确度：每月±15秒（无校准信号时）数字计时：时、分、秒、上午（A）/下午（P）、月、日、星期，气压变化指示时制：12小时及24小时日历系统：2000年至2099年间的全自动日历其他：三种数字画面格式（星期，月，日；气压变化，月日；时分秒）；本地城市代码（可从29个城市代码中选择）；标准时间/夏令时间（日光节约时间）指针计时：时，分（指针每10秒钟转动一下），秒时间校准信号的接收：每天最多自动接收信号6次（中国校准电波信号为每天5次）；一次成功后当天便不再自动接收；手动信号接收；信号接收模式可接收的时间校准电波信号：德国Mainflingen（简称：DCF77，频率：77.5kHz）；英国Anthorn（简称：MSF，频率：60.0kHz）；美国科罗拉多州Fort Collins（简称WWVB，频率：60.0kHz）；日本福岛（简称：JJY，频率：40.0kHz）；日本福冈/佐贺（简称：JJY，频率：60.0kHz）；中国河南省商丘市（简称：BPC，频率：68.5kHz）数码罗盘：60秒钟连续测定；16个方向；角度值0°至359°；测量单位：1°（数字画面）/6°（指针）；秒针指示北方：罗盘校准（双向，磁偏角）测高计：测量范围：无参考高度的情况下-700至10000m（或-2300至32800ft.）显示范围：-3000至10000米（或-9840至32800ft.）根据参考高度的测量或由于大旗条件可能会产生负数值。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
envada6000b3说明书
设备介绍
ENVADA数显表EN6000B3 ENVADA数显表是由英国的ENVADA研发的产品，EN6000B3系列数显仪是一款可对电流(可开方运算)、电压(可开方运算)、频率、热电偶、热电阻等多种工业信号进行采集、显示、报警、变送，并具备通讯、打印等功能的数字仪表，可用于流量、温度、压力、液位、速度等工业工程量的监测，并可对每通道数值。
具备多种仪表外形、及大LED窗口、光柱棒图等多种显示方式。
EN400涡流探头校验仪集精确的直流电源，高精度的液晶数显表，专用测量支架于一体，EN400涡流探头校验仪仪表面板表计直观地指示出前置器供电电压和探头间隙电压，为校验涡流探头提供了有效手段。
EN400涡流探头校验仪可在现场安装时向前置器供电，进行探头安装间隙的调整。
ENVADA的EN400涡流探头校验仪可校验国产和进口的五类探头。
EN400涡流探头校验仪外型尺寸紧凑，方便携带。
ENVADA EN6000B3-1单回路(光柱)数显仪：具备1个输入通道。
标准160×80、80×160、96×96面板仪表提供单光柱指示;160×80面板仪表可提供大窗口显示(无棒图)功能。
其中精简型号仪表可提供变送/RS485通讯，2-3个报警输出，24V馈电输出，模拟量输入;标准型提供总计6个功能模块，实现变送、RS485/RS232通讯，24V配电、打印、报警输出等功能，可选择频率输入。
ENVADA数显表： ENVADA EN6000B3-2双回路(光柱)数显仪：具备2个输入通道。
提供总计6个功能模块，实现变送、RS485/RS232通讯，24V配电、打印、报警输出等功
能，可选择一通道频率输入160×80、80×160、96×96面板仪表提供光柱指示;80×160可提供双长光柱指示仪表。
ENVADA EN6000B3-3双回路带算法(光柱)数显仪：在EN6000B3-2双回路(光柱)数显仪基础上增加双通道之间的加、减、乘、除等运算关系 ENVADA 数显表EN6000B 1-33-00-40-1000-01 ENVADA数显表系列EN6000B3 ENVADA 数显表该产品种类齐全，品质优良，如您有意购买，欢迎来电咨询！上海智鸢机电作为国内大型机电设备供应商，近期热销产品包括：AUTRONICA 接口单元 BZ-500/01 AUTRONICA 防爆烟雾探头BHH-500/EX，部件号：700079 AUTRONICA 烟雾探头 BHH-
500/S，部件号： 700079 AVTRON 编码器HS45FAYAY8WDAYZA BLICKLE 聚酰胺轮 GSPO 202/45K BLICKLE 焊接轮BS-SPO-150K BLICKLE 车轮GTH 125/15K BLICKLE 车轮GTH 200/25K BLICKLE 聚酰胺轮 VSTH 100x40/25-40k BUSCK 电机ME160L-4 CMC 放大器MW1-13262 GEA 立轴修理包2059-9902-060 GEA 润滑油0015-0003-080 LUBRICATING OIL-CLP100-2,5L IFM 传感器SLG23CEEAK0A IXYS 模块EBST5-22A S02241 0910/8414/006 JEONFF 同步马达 FME-2D-B KABELMETAL 电缆FBL 6101/1 LIY 0,25QMM VDE K-TRON 自动加料机K-ML-D5-KT20 LIEBHERR 蜂鸣喇叭 614045914 MASIC SSI接口板BK684SSI470-SSI MAXON 控制阀100SMA11-AA11-CC21A0 MAXON 控制阀 150SMA11-AA11-CC21A0 MEDC 防爆三色灯柱总成SM87HXBAB220RY2T2BNNR红色MEDC 防爆三色灯柱总成
SM87HXBAB220YY2T2BNNY黄色 MEDC 防爆三色灯柱总成SM87HXBAB220BY2T2BNNB蓝色 MEDC 红色报警灯柱SM87HXBAB220RY2T2BNNR MEDC 蓝色报警灯柱SM87HXBAB220RY2T2BNNB MEDC 黄色报警灯柱SM87HXBAB220RY2T2BNNY NASH-ELMO 风机G 200 28H1600-7AH26 P+F 总线连接器V1S-G-PG9 P+F 总线连接器V1S-G-ABG-PG9 P+F 传感器接插件V1S-G-BK2M-PUR-U P+F 传感器接插件 V1-W-2M-PUR P+F 传感器接插件V1-G-N-15M-PUR
peterhirt 压力传感器T102F 9L0415219 PORTESCAP 步进电机P532 258 0.7-10 PRIMAT 测量尺NR:33477020 PROTEGO 呼吸阻火阀 VD/SK 50 NR:97/1481/08 01 PROTEGO 呼吸阻火阀VD/SK 50 NR:97/1481/08 01 QUARTZDYNE 压力传感器dsb301-20-c85 RELPOL 继电器RSR30-D05-D1-02-040-1 REVO 气动三块式调节球阀RS5050007800000 S+B 推杆式开关D-89143 SATO PARTS 恒行保险丝管F-100 SCHAKO 低温防结露旋流风口 VDW-LT/600*24 SCHAKO 条形风口 VSD35-4/6000 SCHAKO 条形风口 VSD35-4/6000 SESINO 散热器 APL430 SICK 编码器 ARS25-FG504096 SOR 压力开关 12NN-K5-N4-B1A 0.75-12PSI VALSTOP 止回阀 H0141S04 YAMAMOTO 水平传感器 Model YAL-13N1; Ser. No: LO13538。